Items where Subject is "T Technology > TN Mining engineering. Metallurgy"
Group by: Creators | Item Type
Number of items at this level: 27.
Abdullah, Mohd Ezree and Ahmad Zamhari, Kemas and Buhari, Rosnawati and Nayan, Nafarizal and Hainin, Mohd Rosli (2013) Short term and long term aging effects of asphalt binder modified with montmorillonite. In: Advanced Materials Engineering and Technology (ICAMET 2013) , 28-29 November 2013, Bandung, Indonesia .
Abdulslam, Salahaldeen Salem (2013) Effect of temperature and curing time on the fabrication of polysiloxane fzlled silica synthetic via casting and compression moulding methods. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Ahmad, Rosli and Asmael, M.B.A. and Ourdjini, Ali (2014) Effect of high cerium and lanthanum on impact toughness of Al-11Si-Cu eutectic cast alloy. Applied Mechanics and Materials, 660 . pp. 195-198. ISSN 1662-7482
Ali, Mohd Amran and Laily Suraya, Laily Suraya and Mohd Nordin, Fatin Aisyah and Hussein, Nur Izan Syahriah and Muhamad, Mohd Razali and Manshoor, Bukhari and Lajis, Mohd Amri and Raja, Izamshah and Mohd Hadzley, Mohd Hadzley and Taufik, Taufik (2014) The performance of brass electrode on material removal for aluminium composite in EDM die-sinking. Applied Mechanics and Materials, 660 . pp. 43-47. ISSN 1662-7482
Asmawi, Rosli and Ibrahim, Mohd Halim Irwan and Mohd Amin, Azriszul (2014) Mixing and characterisation of stainless steel 316L feedstock for waste polystyrene binder system in metal injection molding (MIM). Applied Mechanics and Materials Journal, 607 . pp. 83-86. ISSN 1660-9336
Firdianto, Ade (2012) Ultrasonic treatment with nickel electroplating combined with oxidation for developing y-Al2O3 washcoat on Fe-Cr-Al substrate. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Ibrahim, Mohd Halim Irwan and Mustafa, N. and Mohd Amin, Azriszul and Asmawi, Rosli (2015) Mechanical properties of SS316L and natural hydroxyapatite composite in metal injection molding. In: International Engineering Research and Innovation Symposium 2015 (IRIS), 12–13 September 2015, Putrajaya, Malaysia.
Ibrahim , Mohd Halim Irwan (2013) Characterization of waste polyethylene terephthalate (PET) as a sustainable binder for the application of green metal injection molding. Other thesis, Universiti Tun Hussein Onn Malaysia.
Ismail, Azzura (2016) Corrosion performance of Inconel 625 in high sulphate content. IOP Conference Series: Materials Science and Engineering, 131 . pp. 1-6. ISSN 1757899X
Ismail, Azzura and Abd Aziz, Norhaslina (2014) Corrosion behavior of WC-Co and WC-Ni in 3.5% NaCl at increasing temperature. Applied Mechanics and Materials, 660 . pp. 135-139. ISSN 1662-7482
Jamaludin, Khairur Rijal and Muhamad, Norhamidi and Ab. Rahman, Mohd Nizam and M. Amin, Sri Yulis and Ahmad, Sufizar and Ibrahim , Mohd Halim Irwan and Murtadhahadi, Murtadhahadi and Mohamad Nor, Nor Hafiez (2009) Moulding parameter optimisation for the best sintered density. In: Proceedings of the World Congress on Engineering 2009, 1-3 July 2009, London.
Kamdi, Zakiah and Phang, C.Y. and Ahmad, Herlin (2014) Corrosion behavior of WC-Co cermet coatings. In: International Conference on Functional Materials and Metallurgy (ICoFM 2014), 17-18 September 2014, Penang, Malaysia.
Lee, Te Chuan and Idris, Maizlinda Izwana and Abdullah, Hasan Zuhudi (2014) Effect of electrolyte concentration on anodised titanium in mixture of B-Glycerophosphate (B-Gp) and Calcium Acetate (Ca). In: International Conference on X-Ray & Related Technique in Research and Industry (ICXRI2014), 11-13 August 2014 , Johor Bahru, Johor.
Mat Noor, Fazimah (2009) Development of powder metallurgy route for production of novel fe-al intermetallics for high temperature applications. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Mohamed Yunus, Mohd Radzi (2009) Discrete element modelling of particulate flow in die filling and powder transfer. PhD thesis, Swansea University.
Mohd Amin, Azriszul and Ibrahim, Mohd Halim Irwan and Asmawi, Rosli and Mustafa, N. and Sa'ude, Nasuha (2015) Solvent and thermal debinding of water atomised SS316L green compact with FOG derivatives as binder in MIM. In: 4th International Conference on Advanced Manufacturing Technology (ICAMT 2015), 20-22 September 2015, Johor Bahru, Malaysia.
Mohd Amin, Azriszul and Ibrahim, Mohd Halim Irwan and Asmawi, Rosli and Mustapha, N. and Hashim, Mohd Yussni (2014) Green density optimisation with sustainable sewage fat as binder components in ss316l feedstock of metal injection moulding process(MIM) by taguchi method. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.
Mohd Nawi, Fifi Khazanie (2013) Mixing and rheological characterization of water atomised stainless steel powder for metal injection moulding using waste polystyrene as binder system. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Muhammad Mujtaba Asad, Muhammad Mujtaba Asad and Hassan, Razali (2015) Development of KBES with hazard controlling factors and measures for contracting health and safety risk in oil and gas drilling process : a conceptual action plan. In: 9th Malaysian Technical Universities Conference on Engineering and Technology 2015 (MUCET 2015), 11 – 13 October 2015, Johor Baharu, Malaysia.
Mustafa, N. and Ibrahim, Mohd Halim Irwan and Asmawi, Rosli and Mohd Amin, Azriszul and Masrol, Shaiful Rizal (2014) Green strength optimization in metal injection molding applicable with a taguchi method L9 (3). In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.
Mustafa, Najwa (2012) Processibility of black garbage bag as a novel binder system in metal injection molding. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Othman, Mohd. Ashraf (2014) New process of developing nanocrystalline FeCr for fuel cell application. Other thesis, Universiti Tun Hussein Onn Malaysia.
Othman, Raudhah and Jamaludin, Shamsul Baharin and Derman, Mohd Nazree (2010) The corrosion study of Co-Cr-Ni alloy fabricated by powder metallurgy. In: International Conference on X-Rays & Related Techniques in Research & Industry, 9 – 10 June 2010, Aseania Resort Langkawi, Malaysia.
Samekto, Haryanti (2010) Design modifications of a thin wall part from aluminium to magnesium. International Journal of Integrated Engineering, 2 (1). pp. 1-9. ISSN 1985-854X
Wan Muhammad, Wan Nur Azrina and Abdullah, Muhammad Aminullah (2015) Effect of the amount and particle size of SiC susceptor on the properties of microwave sintered magnesium. In: International Engineering Research and Innovation Symposium 2015 (IRIS), 12–13 September 2015, Putrajaya, Malaysia.
Wan Muhammad, Wan Nur Azrina and Yoshiharu, Mutoh (2014) Effect of mixing condition on the mechanical properties of magnesium based composites. In: International Conference on X-Ray & Related Technique in Research and Industry (ICXRI2014), 11-13 August 2014 , Johor Bahru, Johor.
Zainal Abidin, Mohd Hazreek and Saad, Rosli and Fauziah, Ahmad and Wijeyesekera, Chitral and Tajul Baharuddin, Mohamad Faizal (2012) Integral analysis of geoelectrical (resistivity) and geotechnical (SPT) data in slope stability assessment. Academic Journal of Science, 1 (2). pp. 305-316. ISSN 2165-6282