Items where Subject is "T Technology > TP Chemical technology > TP1080-1185 Polymers and polymer manufacture"

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type
Jump to: A | B | H | I | J | K | L | M | O | R | S | T | U | W
Number of items at this level: 67.

A

Ab Latif, Najibah (2014) Vibration damping characteristic and sound absorption of bio-polymer from waste cooking oil. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abd. Rahman, Nor Mas Mira and Hassan, Aziz and Yahya, Rosiyah (2010) Plasticisation effect on thermal, dynamic mechanical and tensile properties of injection-moulded glass-fibre/polyamide 6,6. Journal of Science and Technology, 3 (1). pp. 1-20. ISSN 1985-8809

Abdul Haq, Reazul Haq (2015) Characterization and development of polycaprolactone (PCL)/montmorillonite (MMT)/hydroxapaptite (HA) nanocomposites for fused deposition modelling (FDM) process. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Haq, Reazul Haq and Wahab, Md Saidin and Mat Uzir , Wahit (2013) Improvement of mechanical properties of polycaprolactone (PCL) by addition of nano-montmorillonite (MMT) and hydroxyapatite (HA). Applied Mechanics and Materials , 315 (1). pp. 815-819. ISSN 1660-7482

Abdullah, Nur Munirah and Abdullah, Mohammad Faiz Liew and Mohd Rus, Anika Zafiah (2015) Mechanical reinforcement of conductive graphite/biopolymer thin film composite. In: International Conference on Electrical and Electronic Engineering 2015 (IC3E 2015), 10-11 August 2015 , Melaka, Malaysia.

Agam, Mohd Arif (2011) Nanotechnology and fabrication of polymeric catalysts. [Video]

Agam, Mohd Arif and Kamarulzaman, Robijah (2008) Star-like patterns from irradiated polystyrene nanospheres. AIP Conference Proceedings, 1136 . pp. 850-854. ISSN 0094-243X (Unpublished)

Agam, Mohd. Arif and Embong, Zaidi and Nur, Hadi and Ibrahim, Mustaffa and Ismail, Lokman Hakim (2011) Investigation of the physical changes of irradiated polystyrene nanospheres exposed to electron beam. Other thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad, Hilton@Mohd Hilton and Tahrim, Zikri and Lee, Sim Yee (2015) XFEM modelling of notched cross-ply woven gfrp composite plates. In: The 14th International Conference on QiR (Quality in Research), 10-13 August 2015, Lombok, Indonesia.

Ajer, Mohd Razali (2012) Studies of epoxy powder coated galvanized steel substrate via electrostatic powder coating system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Alias, Mohd Fairuz (2003) A study of a problematic injection product, leading to the re-design and improvement of the product:study on relationship materials, locating gates and types of mould by moldflow analysis. Masters thesis, German-Malaysian Institute.

Asman, Saliza and Mohamad, Sharifah and Muhamad Sarih, Norazilawati (2015) Effects of RAFT agent on the selective approach of molecularly imprinted polymers. Polymers, 7 . pp. 484-503. ISSN 20734360

Asman, Saliza and Mohamad, Sharifah and Muhamad Sarih, Norazilawati (2015) Exploiting β-cyclodextrin in molecular imprinting for achieving recognition of benzylparaben in aqueous media. International Journal of Molecular Sciences, 16 . pp. 3656-3676. ISSN 14220067

Asman, Saliza and Mohamad, Sharifah and Muhamad Sarih, Norazilawati (2015) Influence of polymer morphology on the adsorption behaviors of molecularly imprinted polymer-methacrylic acid functionalized β-cyclodextrin. Journal of Applied Polymer Science, 132 (43). pp. 1-12. ISSN 10974628

Asman, Saliza and Mohamad, Sharifah and Muhamad Sarih, Norazilawati (2016) Study of the morphology and the adsorption behavior of molecularly imprinted polymers prepared by reversible addition-fragmentation chain transfer (RAFT) polymerization process based on two functionalized β-cyclodextrin as monomers. Journal of Molecular Liquids, 214 . pp. 59-69. ISSN 01677322

Asman, Saliza and Yusof, Nor Azah and Abdullah, Abdul Halim and Haron, Md Jelas (2012) Synthesis and characterization of hybrid molecularly imprinted polymer (MIP) membranes for removal of methylene blue (MB). Molecules, 17 . pp. 1916-1928. ISSN 14203049

Azis, N. Hafizah and Rahim, M. Zulafif and Sa'ude, Nasuha and Rafai, N. and Yusof, M. S. and M. Tobi, A. L. and Sharif, Z. M. and Ibrahim, M. Rasidi and Ismail, A. E. (2017) The influence of injection molding parameter on properties of thermally conductive plastic. IOP Conference Series: Materials Science and Engineering, 203 (012018). pp. 1-9. ISSN 1757899X

Azmi, Mohd Azham (2012) Fabrication and characterisation of sandwich composites of glass fiber skin and polyurethane foam reinforced coconut coir fiber core. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Azmi, Mohd Azham and Abdullah, H. Z. and Idris, Maizlinda Izwana (2013) Properties of polyurethane foam/coconut coir fiber as a core material and as a sandwich composites component. In: International Conference on Mechanical Engineering Research (ICMER2013), 1-3 July 2013, Kuantan, Pahang.

B

Basri, Hatijah and Ismail, Ahmad Fauzi and Aziz, Madzlan (2008) Effect of different incorporation route on the properties of polyethersulfone-silver membrane. International Conference on Nanoscience and Nanotechnology 2008, 1136 . pp. 93-97. ISSN 0094-243X (Unpublished)

H

Hadipramana, Josef and Abdul Samad, Abdul Aziz and Ahmad Zaidi , Ahmad Mujahid and Mohammad, Noridah and Ali, Noorwirdawati (2012) Contribution of polypropylene fibre in improving strength of foamed concrete. In: International Conference on Advanced Material Engineering & Technology (ICAMET 2012) , 28-30 November 2012, Penang, Malaysia.

Hussin, Rosniza and Kwang-Leong, Choy and Xiang , Hui Hou (2014) Fabrication of multilayer ZnO/Ti02/Zn0 thin films with enhancement of optical properties by atomic layer deposition (ALD). Applied Mechanics and Materials , 465 (2).

I

Ibrahim, Mohd Halim Irwan and Manaf, M. H. A. and Othman, Mohd Hilmi and Mustafa, N. and Masrol, Shaiful Rizal and Rafai, Noor Hakim (2014) Optimisation of processing condition using Taguchi Method on warpage for HDPE-clay composite. Applied Mechanics and Materials, 660 . pp. 28-32. ISSN 1662-7482

Ibrahim , Mohd Halim Irwan and Muhamad, Norhamidi and Sulong, Abu Bakar and Jamaludin, Khairur Rijal and Mohamad, Hafiez (2010) Parameter optimization towards highest micro MIM density by using Taguchi Method. Key Engineering Materials, 443 . pp. 705-710. ISSN 1013-9826 (Unpublished)

J

Juki, Mohd Irwan and M. M. K., Annas and Abdul Kadir, Aeslina and Othman, Norzila and Koh , Heng Boon and Roslan, Muhammad Asyraf and Khalid, Faisal Sheikh (2014) Cracking propagation of reinforced concrete using polyethylene terephtalate (PET) bottles as fine aggregate. In: 4th International Conference on Key Engineering Materials (ICKEM 2014) , 22-23 March 2014, Bali, Indonesia .

Juki, Mohd Irwan and Othman, Norzila and Koh , Heng Boon and R. M., Asyraf and Khalid, Faisal Sheikh and Mahamad, Mohd Khairil Annas and A. M., Shahrizan (2013) Development of mix design nomograph for polyethylene terephthalate fiber concrete. Applied Mechanics and Materials , 253 (1). pp. 408-416. ISSN 1660-9336

K

Kormin, Shaharuddin and Kormin, Faridah and Hossen Beg, Mohammad Dalour and Mat Piah, Mohd Bijarimi (2015) Study the physical, mechanical, thermal and morphological properties of LDPE/SAGO starch blend. In: International Engineering Research and Innovation Symposium 2015 (IRIS), 12–13 September 2015, Putrajaya, Malaysia.

L

Leman, A S and Shahidan, Shahiron and Nasir, A J and Senin, M S and Mohd Zuki, Sharifah Salwa and Wan Ibrahim, Mohd Haziman and Deraman@Muhammad, Ruzilawati and Khalid, Faisal Sheikh and Azhar, A T S (2017) Properties of concrete containing coconut shell powder (CSP) as a filler. In: IOP Conf. Series: Materials Science and Engineering.

Leman, A S and Shahidan, Shahiron and Senin, M S and Shamsuddin, S M and Anak Guntor, N A and Mohd Zuki, Sharifah Salwa and Khalid, Faisal Sheikh and Azhar, A T S and Razak, N H S (2017) Durability of coconut shell powder (CSP) concrete. In: IOP Conf. Series: Materials Science and Engineering.

M

Mahmood, S. and Hemdi, A. R. and M. Saman, M. Z. and M. Y. , Noordin (2014) Fuzzy logic approach for assessing sustainability: methodology development for hollow fiber membrane module. Advanced Materials Research, 845 . pp. 579-583. ISSN 16628985

Mahmood, S. and Jiran, N. S. and M. Saman, M. Z. and M. Y., Noordin (2014) Determination of parameters for sustainability assessment of hollow fiber membrane module life cycle. Advanced Materials Research, 845 . pp. 724-729. ISSN 16628985

Mahmood, Salwa and Jamil, Nor Hazrina and Mat Saman, Muhamad Zameri and Mohd Yusof, Noordin (2014) Assessing sustainability performance of polymer processing: case study of hollow fiber membrane. Advanced Materials Research, 903 . pp. 365-370. ISSN 16628985

Mat Hassan, Nik Normunira (2016) Characteristic of renewable polymer incorporated with stabilizer to characterize the endurance of ultra voilet irradiation exposure. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Mohamad, Mahmod Abd Hakim and Wan Mat, Wan Ali and Ahmad Zaidi, Ahmad Mujahid and Tuan Ibrahim, Tuan Mohd Hafeez and Hassim, Hairul Mubarak and Mustapa, Mohammad Sukri and Abdullah, Shohaimi (2017) Penetration resistance force of sandwich panels composite with kenaf foam as a core material against deformable projectiles. Defence S&T Technical Bulletin, 10 (2). pp. 101-168. ISSN 19856571

Mohd Jais, Farhana Hazwanee (2017) Determination of processing parameters of photostability for polyvinyl chloride rice husk composites. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Rus, Anika Zafiah (2011) Bio-degradation of polyurethane on bio-epoxy. Other thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Rus, Anika Zafiah (2012) Bio-epoxy preparation based on palm oil. Other thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Rus, Anika Zafiah (2009) Effect of titanium dioxide on material properties for renewable rapeseed and sunflower polyurethane. International Journal of Integrated Engineering, 1 (1). pp. 15-22. ISSN 1985-854X

Mohd Rus, Anika Zafiah (2010) Polymers from renewable materials. Science Progress, 93 (3). pp. 285-200. ISSN 0036-8504

Mohd Rus, Anika Zafiah and M. Salim, N. Syamimi and Sapiee, N. Haiza (2015) Recycling of cooking oil waste into reactive polyurethane for blending with thermoplastic polyethylene. International Journal of Polymer Science, 2015 . ISSN 1687-9422

Mohd Rus, Anika Zafiah and Mat Hassan, Nik Normunira (2015) Thermal degradation and damping characteristic of UV irradiated biopolymer. International Journal of Polymer Science . ISSN 1687-9422

Mohd Rus, Anika Zafiah (2006) Thermal and photochemical degradation of polyurethanes based on renewable materials. PhD thesis, University of Warwick.

Mohd Salim, Nurul Syamimi (2017) Characterization of thermoset biopolymer in thermoplastic of low and high density polyethylene upon UV irradiation. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohid, Siti Rahmah (2015) Photodegradation of biopolymer doped with titanium dioxide (TiO2) as ultraviolet (UV) stabilizer. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Muhamad, Hamizan (2003) A study of a problematic injection product, leading to the re-design and improvement of the:mould design and manufacture. Masters thesis, German-Malaysia Institute.

Muniandy, Nagentrau (2017) Formulating the plastic deformation expression on coated substrate as a coating selection tool. Masters thesis, Universiti Tun Hussein Onn Malaysia.

O

Othman, Mohd Hilmi (2015) The modelling of processing conditions for polypropylene-nanoclay integral hinges at high heat exposure. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Othman, Siti Amira and Radiman, Shahidan (2016) Formation of polyaniline emeraldine base (PANI-EB) nanoparticles using Langmuir- Blodgett technique. In: International Conference on Biosciences & Medical Engineering (ICBME2016), 10th –11th November 2016, Universiti Teknologi Malaysia.

Othman, Siti Amira and Radiman, Shahidan (2016) Role of Horseradish peroxidase in polypyrrole conductivity. In: 29th Regional Conference of Solid State Science and Technology, RCSSST 2016, 15 - 17 Nov 2016, Johor Bahru, Malaysia.

Othman , Mohd Hilmi and Hasan, Sulaiman and Hassan, Z. (2013) The effects of mould design towards the quality of integral hinges test samples in injection moulding simulation. In: International Conference on Mechanical Engineering Research (ICMER2013), 1-3 July 2013, Kuantan, Pahang.

Othman , Mohd Hilmi and Shamsudin, Shazarel and Hasan, Sulaiman and Abd Rahman, Mohd Norhafiz (2012) The effects of injection moulding processing parameters and mould gate size towards weld line strength. Advanced Materials Research, 488 . pp. 801-805. ISSN 1022-6680

R

Rahman, M. H. and Yusof, Mohd Sallehuddin and Ibrahim, Mohd Halim Irwan and Osman, Saliza Azlina (2014) Feasibility study: investigation of polymer nano-composites (PNC) material for biomedical application via fused deposition modelling (FDM) routes. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Rejab, Noor Azlina and Yusof, Md Salleh (2014) A study on the hard wearing UV treated photopolymer printing plate for articular replacement/arthroplasty (biomedical). In: 4th International Conference on Key Engineering Materials (ICKEM 2014) , 22-23 March 2014, Bali, Indonesia .

S

Sa'ude, Nasuha and Ibrahim, Mustaffa and Ibrahim, Mohd Halim Irwan (2014) Melt flow behavior of metal filled in polymer matrix for fused deposition modeling (FDM) filament. Applied Mechanics and Materials , 660 . pp. 89-93. ISSN 1660-9336

Sa'ude, Nasuha and Ibrahim, Mustaffa and Ibrahim, Mohd Halim Irwan (2014) Melt flow behavior of polymer matrix extrusion for fused deposition modeling (FDM). Applied Mechanics and Materials , 660 . pp. 89-93. ISSN 1660-9336

Sa'ude, Nasuha and Isa, N.M.A. and Ibrahim , Mustaffa and Ibrahim, Mohd Halim Irwan (2014) A study on contact angle and surface tension on copper-ABS for FDM feedstock. Applied Mechanics and Materials , 607 . pp. 747-751. ISSN 1660-9336

Sa'ude, Nasuha and Kamarudin, Khairu and Ibrahim, Mustaffa and Ibrahim, Mohd Halim Irwan (2014) Melt flow index of recycle abs for fused deposition modeling (FDM) filament. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Sazali, Norazlianie and Harun, Zawati and Salleh, W. N. W. and Nordin, N. A. H. and Yousof, N. and Ismail, A. F. (2015) Gas permeation properties of the matrimid based carbon tubular membrane: the effect of carbonization temperature. International Journal of Conceptions on Mechanical and Civil Engineering, 3 (1). pp. 6-9. ISSN 23572760

Sazali, Norazlianie and Salleh, W. N. W. and Harun, Zawati and Ismail, Ahmad Fauzi (2014) Gas permeation properties and characterization of polymer based carbon membrane. Advanced Materials Research, 983 . pp. 246-250. ISSN 16628985

Sazali, Norazlianie and Wan Salleh, Wan Norharyati and Md Nordin, Nik Abdul Hadi and Harun, Zawati and Ismail, Ahmad Fauzi (2015) Matrimid-based carbon tubular membranes: The effect of the polymer composition. Journal of Applied Polymer Science, 132 (33). ISSN 00218995

Shahidan, Shahiron and Mohd Zuki, Sharifah Salwa and Choong, Kok Keong and J., Jayaprakash (2015) Repaired of fire-damaged concrete-filled double skin steel tubular (CFDST) columns with fiber reinforced polymer (FRP). In: 9th Malaysian Technical Universities Conference on Engineering and Technology 2015 (MUCET 2015), 11 – 13 October 2015, Johor Baharu, Malaysia.

Subramaniyan, S. Kanna and Mahzan, Shahruddin and Ghazali, Mohd Imran and Ahmad Zaidi , Ahmad Mujahid and Prabagaran, Prasath Kesavan (2013) Energy absorption characteristics of polyurethane composite foam-filled tubes subjected to quasi-static axial loading. Applied Mechanics and Materials , 315 . pp. 872-878. ISSN 1660-9336

Subramaniyan, S. Kanna and Mahzan, Shahruddin and Ghazali, Mohd Imran and Ismon, Maznan and Ahmad Zaidi , Ahmad Mujahid (2013) Mechanical behavior of polyurethane composite foams from kenaf fiber and recycled tire rubber particles. Applied Mechanics and Materials , 315 . pp. 816-866. ISSN 1660-9336

T

Tuah, Siti Nor Aizura (2015) Mechanical and thermal properties of polypropylene/clay roof tiles waste (PP/CRTW) composites. Masters thesis, Universiti Tun Hussein Onn Malaysia.

U

Umor, Muhammad Zulkifli (2003) A study on process parameter of reducing thinwall thickness by using mold flow simulation analysis. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

W

Wahab, Wahab and Dalgarno, K. W. and Cochrane, B. (2011) Synthesis of polymer nanocomposites for Selective Laser Sintering (SLS). Journal of Mechanics Engineering and Automation, 1 (2). pp. 100-107. ISSN 2159-5275 (Unpublished)

Wan Muhammad, Wan Nur Azrina and Othman , Mohd Hilmi and Hasan, Sulaiman and Ruslee, M. F. (2013) A study of injection moulding optimum parameters to control shrinkage and warpage of polypropylene-nanoclay hinges samples. In: International Conference of Mechanical Engineering 2013 , 17-18 December 2013, Hotel Equatorial, Bangi .

This list was generated on Sat Oct 20 12:20:35 2018 MYT.