Items where Subject is "T Technology > TP Chemical technology > TP315-360 Fuel"

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type
Jump to: A | B | C | D | H | I | K | L | M | N | P | R | S | Y | Z
Number of items at this level: 59.

A

Abd Hadi, Syahrunniza (2015) Experimental study of the bio-additives in biodiesel fuel on performance and emissions characteristics of diesel engine. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Ghafir, Mohammad Fahmi and Mohideen Batcha, Mohd Faizal and R. Raghavan, Vijay (2009) Prediction of the thermal conductivity of metal hydrides - the inverse problem. International Journal of Hydrogen Energy, 34 (16). pp. 7125-7130.

Agustian , Egi (2012) Production of biodiesel from waste cooking oil using ultrasonic tubular reactor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad Tajuddin, Ahmad Syukri (2015) Influences of preheat biodiesel fuel on performance and emissions characteristic of diesel engine. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Amirnordin, Shahrin Hisham and Alimin, Ahmad Jais and Khalid , Amir (2013) Effects of palm oil biodiesel blends on the emissions of oil burner. Applied Mechanics and Materials , 315 . pp. 956-959.

Azman, Norazwan and Manshoor, Bukhari and Khalid, Amir (2014) The production and comparison of fuel properties on biodiesel with alternative fuel : a review. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Azman, Norazwan and Manshoor, Bukhari and Samsudin, Dahrum and Khalid, Amir (2014) Experimental investigation of standard handling and storage duration on fuel properties, appearance, burning process and emissions of biodegradable alternative fuel. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Azman, Norazwan and Suardi, Mirnah and Khalid, Amir (2014) The effects of storage duration on biodiesel derived from waste cooking oil. Applied Mechanics and Materials, 660 . pp. 386-390. ISSN 1662-7482

B

Basharie, Siti Mariam and Mohamad Jaat, Md Norrizam and Khalid , Amir and Alimin, Ahmad Jais and Manshoor, Bukhari and Mohd Ali, Mas Fawzi and Salleh, Hamidon and Mohammad, Md Nor Anuar (2014) A new approach in exploration the air entrainment, endothermic and heat recovery process of biodiesel ignition. Other thesis, Universiti Tun Hussein Onn Malaysia.

C

Chia, Kim Seng (2015) Predicting the boiling point of diesel fuel using adaptive linear neuron and near infrared spectrum. In: 10th Asian Control Conference (ASCC 2015), 31 May - 3 June 2015, Sutera Harbour Resort, Kota Kinabalu, Sabah.

D

Derawi, Darfizzi and Salimon, Jumat (2013) Penghasilan poliol minyak sawit olein secara hidrolisis selanjar dan berkelompok. Sains Malaysiana, 42 (8). ISSN 0126-6039

H

Hasan, Sulaiman and Hasnan, Khalid and Md Yusof, Mohammad Zainal and Sani, Winardi (2015) Reaction kinetic model for the two-step transesterification in the biodiesel production plant. Other thesis, Universiti Tun Hussein Onn Malaysia.

Hasan, Sulaiman and Sebayang, Darwin and Untoro, P. and Mohd Rus, Anika Zafiah and Mohd Daim, Ahmad Daud and Praptijanto, Achmad and Agustian, Egi and Leong, Boon Soon and Mohd Yusoff, Nurrul Rahmah (2014) The novel continues biodiesel using ultrasound clamp tubular reactor. Other thesis, Universiti Tun Hussein Onn Malaysia.

Humairak, Yusof and Tamaldin, Noreffendy and Abdollah, Mohd Fadzli B. and Ali, M. F. and Khalid, Amir (2014) The storage effect on fuel properties and emission for variety biodiesel blends. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

I

Ismail, Muhammad Yusri (2014) One-dimensional simulation of a retrofitted medium duty engine running using compressed natural gas. Masters thesis, Universiti Tun Hussein Onn Malaysia.

K

Khalid, Amir and Abas, Azmi (2014) Effects of fuel additive on performance and emissions characteristics of diesel engine fuelled by biodiesel derived from palm oil. In: International Integrated Engineering Summit (IIES 2014) , 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Khalid, Amir and Lambosi, Latip and Suardi, Minah and Amirnordin, Shahrin Hisham and Zaman, Izzudin and Mansor, Norani and Manshoor, Bukhari (2014) Spray characteristic of rapid mixing jatropha oil biodiesel in burner system. In: International Integrated Engineering Summit (IIES 2014) , 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Khalid, Amir and Manshoor, Bukhari and Sapit, Azwan and Razali, Mohd Azahari and Zaman, Izzuddin and Mohamad, Mohd Nor Anuar (2014) The effect of storage container and light exposure on biodiesel characteristics derived by crude palm oil. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Khalid , Amir and Ishak, Yusri and Manshoor, Bukhari and Sapit, Azwan and Leman, Abd Mutalib and Zaman, Izzuddin (2014) Emissions characteristics of small diesel engine fuelled by waste cooking oil. In: 4th International Conference on Production, Energy and Reliability 2014 (ICPER 2014) , 3-5 June 2014, Kuala Lumpur Convention Centre, Malaysia .

Khalid , Amir and Manshoor, Bukhari and Osman, Shahrul Azmir and Mohamad Jaat, Md Norrizam and Mustaffa, Norrizal and Basharie, Siti Mariam (2013) Performance and emissions characteristics of diesel engine fuelled by biodiesel derived from palm oil. Applied Mechanics and Materials, 315 . pp. 517-522.

Khalid , Amir and Mustafa, Norrizal and Manshoor, Bukhari and Zakaria, Hanis and Alimin, Ahmad Jais and Leman, Abd Mutalib and Sadikin, Azmahani (2014) The comparison of preheat fuel characteristics of biodiesel and straight vegetable oil. Applied Mechanics and Materials Vols. 465-466 (2014), 456 . pp. 161-166.

Khalid , Amir and Tamaldin, N. and Jaat, M. and Mohd Ali, Mas Fawzi and Mansoor, Bukhari and Zaman, Izzuddin (2013) Impacts of biodiesel storage duration on fuel properties and emissions. In: MITC 2013 : Malaysian International Tribology Conference 2013, 18- 20 November 2013, Kota Kinabalu, Sabah, Malaysia .

L

Lambosi, Latip and Khalid, Amir and Manshoor, Bukhari (2014) Emission and performance characteristic of biodiesel burner system: a review. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Lambosi, Latip and Khalid, Amir and Manshoor, Bukhari and Amirnordin, Shahrin Hisham and Lo, Kok Hao (2014) Effect of nozzle angle to combustion characteristic in biodiesel burner. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Leong, Boon Soon (2014) Biodiesel processing using ultrasound clamp on tubular reactor for palm oil. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Leong, Boon Soon and Mohd Rus, Anika Zafiah and Hasan, Sulaiman (2013) Continuous biodiesel production using ultrasound clamp on tubular reactor. In: International Conference on Mechanical Engineering Research (ICMER2013), 1-3 July 2013, Kuantan, Pahang.

M

Mohamad Jaat, Md Norrizam and Manshoor, Bukhari and Basharie, Siti Mariam and Andsaler, Adiba Rhaodah and Sapit, Azwan and Khalid, Amir (2014) Study on spray characteristics of biodiesel using a rapid compression machine. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Mohamed Sunar, Norshuhaila and Emparan, Q. and Abdul Karim, Ahmad Tarmizi and Maslan, Masayu and Mustafa, Fazlyana and Khaled, Nadiah (2013) Characteristics of polycyclic aromatic hydrocarbons emissions of palm-biodiesel blend. In: 1st International Conference on Science & Engineering of Material 2013 (ICoSEM 2013), 13-14 November 2013, Kuala Lumpur .

Mohd Ali, Mas Fawzi (2012) Research on control of ignition and THC formation in CNG engines by the application of gas-jet direct-ignition technique. PhD thesis, University of Tokushima.

Mohd Ariffin , Maslina (2013) Enhancing fuel burning efficiency by regulate spark plug voltage supply. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Kamaruddin, Nurul Hidayah and Hainin, Mohd Rosli and Abdul Hassan, Norhidayah and Abdullah, Mohd Ezree (2015) Effect of chemical warm asphalt additive on wettability of aged binder incorporating waste engine oil. International Journal of Applied Engineering Research, 10 (10). pp. 26139-26147. ISSN 0973-4562

Mohd Yunos, Siti Nur Mariani and Abdul Ghafir, Mohammad Fahmi and AB Wahab, Abas (2015) Evaluation on alternative jet fuels application and their impact on airport environmental charges. ARPN Journal of Engineering and Applied Sciences, 11 (12). pp. 7380-7387. ISSN 18196608

Mohd Zain, Norhidayah (2010) Development of palm oil-based fly ash powder-binder system for three-dimensional printing. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohmad Ja'at @ Mohd Noh, Md Norrizam and Khalid, Amir and Sapit, Azwan and Adibah, Adibah and Basharie, Siti Mariam and Mohd Ali, Mas Fawzi (2015) The influences of injection pressure and ambient temperature on ignition delay and emission. In: International Engineering Research and Innovation Symposium 2015 (IRIS), 12–13 September 2015, Putrajaya, Malaysia.

Mohmad Ja'at @ Mohd Noh, Md Norrizam and Khalid, Amir and Sapit, Azwan and Basharie, Siti Mariam and Andsaler, Adiba Rhaodah and Ramsy, Him (2014) Effects of temperature and ambient pressure on spray characteristics of biodiesel combustion. In: International Integrated Engineering Summit (IIES 2014) , 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Mokhtar, Azizul and Atan, Nazrul and Rahman, Najib and Khalid, Amir (2014) Review of performance and emmissions characteristics of bio-additive fuel on SI engine fuelled by biopetrol. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Mudin, Azim Isha (2015) Emission characteristic of small diesel engine fuelled by preheat biodiesel. Masters thesis, Universiti Tun Hussein Onn Malaysia.

N

N. M. Sunar, N. M. Sunar and Q. Emparan, Q. Emparan and Leman, Abd Mutalib and M. Maslan, M. Maslan (2015) Survival of pseudomonas putida in biodiesel-diesel mixture (B50) contaminated soil. In: Engineering Technology International Conference 2015, 10-11 August 2015, Kuta, Bali, Indonesia.

Nasir, Nurul Fitriah (2015) Pemodelan dan pengoptimuman proses biodiesel selanjar dan sesekumpul menggunakan mangkin homogen dan heterogen. PhD thesis, Universiti Kebangsaan Malaysia.

Nursal, Ridwan Saputra (2015) Performance and emissions characteristics of alternative biodiesel fuel on 4-stroke marine diesel engine. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Nursal, Ridwan Saputra and Khalid, Amir and Ahmad Tajuddin, Ahmad Syukri and Abd. Hadi, Syahrunniza (2015) Performance and emissions characteristics of alternative biodiesel fuel on small diesel engine. In: International Engineering Research and Innovation Symposium 2015 (IRIS), 12–13 September 2015, Putrajaya, Malaysia.

P

Praptijanto, A. and Sebayang, Darwin and Agustian, E. and Untoro, P. (2011) Rapid monitoring of fatty acid methyl ester in sonochemistry transesterification process using attenuated total reflection. In: International Conference on Environment (ICENV2010), 13-15 Disember 2010, Pulau Pinang.

R

Rahman, Mohd Najib and Atan, Nazrul and Mokhtar, Azizul and Khalid, Amir (2014) Influences of intake temperature and bio-petrol fuel temperature on SI engine: an overview. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Ramsy, Him and Khalid, Amir and Andsaler, Adiba Rhaodah and Mohmad Ja'at @ Mohd Noh, Md Norrizam (2014) Modeling of common rail system and constant volume chamber in biodiesel combustion: a review. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

S

Sa'at, Narisa and Samsuri, A. and Hamzah, K. and Sulaiman, H. (2015) Compatibility issue related to the use of biodiesel with automotive materials. In: 2nd International Materials, Industrial & Manufacturing Engineering Conference (MIMEC 2015), 4-6 February 2015, Bali Nusa Dua Convention Center, Bali, Indonesia.

Sani, Winardi (2014) Multistage methanolysis of crude palm oil for biodiesel production in a pilot plant. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Sani, Winardi and Hasnan, Khalid (2008) UTHM biodiesel pilot plant development. In: International Conference on Mechanical and Manufacturing Engineering 2008 (ICME 2008), 21-23 May 2008, Johor Bahru.

Sani, Winardi and Hasnan, Khalid and Md Yusof, Mohammad Zainal (2012) Application of process analysis for esterification and two-step transesterification in the biodiesel production plant. In: International Conference on Advances In Electrical and Mechanical Engineering (ICAEME'2012), 18-19 December 2012, Phuket, Thailand.

Sapit, Azwan and Razali, Mohd Azahari and Hushim, Mohd Faisal and Mohamad Jaat, Md Norrizam and Mohamad, Akmal Nizam and Khalid, Amir (2014) Dynamic behavior of rapeseed oil spray in diesel engine. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Sebayang, Darwin and Hasan, Sulaiman and Abdullah, Nor Hazwani (2013) Pengeluaran biodiesel berdasarkan sisa minyak masak: "promosi penubuhan pada industri lestari bersepadu di chip keropok kilang di Batu Pahat". In: Persidangan Kebangsaan Pertama Program Pemindahan Ilmu (KTP01), 21-23 Ogos 2013, Bangi. (Unpublished)

Sia, Chee Kiong and Mohd Nor, S. Hakimi and Ong, Pauline and Che Othman, M. Shaidi (2015) Preparation of paint by using palm oil fly ash, pofa based pigment. In: The 3rd International Conference on Mechanical Engineering Research (ICMER) 2015, 18 – 19 August 2015, The Zenith Hotel, Kuantan.

Sies, Mohamad Farid (2013) Development of the premixing injector in burner system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Suardi, Mirnah and Amirnordin, Shahrin Hisham and Khalid, Amir (2015) Effect of mixture formation on combustion in burner system. In: International Engineering Research and Innovation Symposium 2015 (IRIS), 12–13 September 2015, Putrajaya, Malaysia.

Suardi, Mirnah and Azman, Norazwan and Samsudin, Dahrum and Amirnordin, S. H. and Mansor, Norani and Khalid, Amir (2014) Experimental study of the ignition process and combustion of biodiesel-water-air rapid mixing derived from waste cooking oil, crude palm oil and jatropha oil in burner combustion. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Suffian, Mohamad Mokhsen (2014) Performance and emissions of compression ignition engine fueled with preheated blend of vegetable oil. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Y

Yii, Ronny Shi Chin and Amirnordin, Shahrin Hisham and Mansor, Mohamad Norani and Khalid, Amir (2014) Numerical analysis of nozzle hole shape to the spray characteristics from premix injector in burner system: a review. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Z

Zakaria, Hanis (2013) Effects of storage temperature and storage duration on biodiesel properties, visual appearances, and emission. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zakaria, Hanis and Khalid , Amir and Sies, Mohamad Farid and Mustaffa, Norrizal (2014) Overview effect of biodiesel storage on properties and characteristics. Applied Mechanics and Materials , 465 . pp. 260-264. ISSN 1660-9336

Zakaria, Hanis and Khalid , Amir and Sies, Mohamad Farid and Mustaffa, Norrizal and Manshoor, Bukhari (2014) Effect of storage temperature and storage duration on biodiesel properties and characteristics. Applied Mechanics and Materials , 465 . pp. 316-321. ISSN 1660-9336

This list was generated on Sat Mar 25 13:57:31 2017 MYT.