Items where Subject is "T Technology > TP Chemical technology > TP785-869 Clay industries. Ceramics. Glass"

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type
Jump to: | A | B | C | H | I | M | N | O | S | Z
Number of items at this level: 25.

Ahmad Sarai, Norazlina (2015) Improvement on mechanical properties sodium feldspar for porcelains tableware. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohid, Zazuli and Okamoto, Yasuhiro and Yamamoto, Keishi and Uno, Yoshiyuki and Miyamoto, Isamu and Cvecek, Kristian Evaluation of molten zone in glass welding using ultra-short pulsed laser. In: 5th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), 2-4 December 2009, Osaka University Convention Centre, Japan.

A

Ab Mannan, Nurhabibah Nabilah and Razali, Sufia Aqilah and Shamsuddin, Suhadir and Noh, Mohamad Zaky (2017) Crystalline phase, surface morphology and electrical properties of monovalent-doped Nd0.75Na0.25Mn1-yCoyO3 manganites. Journal of Science and Technology, 9 (3). pp. 65-69. ISSN 26007924

Ab Mannan, Nurhabibah Nabilah and Shamsuddin, Suhadir and Noh, Mohamad Zaky and Mohamed, Zakiah (2018) Crystalline phase, surface morphology and electrical properties of monovalent doped Pr0.75Na0.25Mn1-yCoyO3 ceramics. International Journal of Current Science, Engineering & Technology, 1 (1). pp. 220-225. ISSN 25814311

Abdul Bakil, Siti Natrah and Hussin, Rosniza and Aramjat, Abu Bakar (2017) Effects of soda lime silicate content on industrial stoneware bodies prepared by pressing method. Materials Science Forum, 888 . pp. 71-75. ISSN 16629752

Abdul Bakil, Siti Natrah and Hussin, Rosniza and Aramjat, Abu Bakar (2017) Influent of borax decahydrate composition as additional flux into stoneware bodies. IOP Conference Series: Materials Science and Engineering, 226 (012165). pp. 1-6. ISSN 1757899X

Agun, Linda and Abu Bakar, Muhammad Subri and Ahmad, Sufizar and Andanastuti, Muchtar and Abd Rahman, Hamimah (2014) Influence of Ag on the chemical and thermal compatibility of LSCF-SDCC for LT-SOFC. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

B

Badarulzaman, N. A. and M. Amiroll, M. A. and Noh, M. Z. and Jikan, S. S. and Yunus, Z. M. (2013) Effect of mica content on the physical, mechanical and morphological properties of alumina-cullet-mica ceramic. Applied Mechanics and Materials, 315 . pp. 919-923. ISSN 16627482

C

Chee-Ming , Chan (2011) Effect of natural fibres inclusion in clay bricks: physico-mechanical properties. Geotechnical and Geological Engineering, 73 (51). pp. 1-8. ISSN 0960-3182

H

Harun, Zawati and Ismail, Nur Farhani and Badarulzaman, Nur Azam (2012) Effect of MgO additive on microstructure of Al2O3. Advanced Materials Research, 488 . pp. 335-339. ISSN 16628985

Harun, Zawati and Ong, Tze Ching (2016) Dynamic drying variables evolution in membrane structure. In: Drying and Energy Technologies. Advanced Structured Materials (63). Springer International Publishing Switzerland, pp. 131-148. ISBN 9783319197661

Hubadillah, Siti Khadijah (2015) Study on the gas performance of ceramic membrane from kaolin prepared by phase inversion technique. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hubadillah, Siti Khadijah and Harun, Zawati and Othman, Mohd Hafiz Dzarfan and Ismail, A. F. and Gani, Paran (2016) Effect of kaolin particle size and loading on the characteristics of kaolin ceramic support prepared via phase inversion technique. Journal of Asian Ceramic Societies, 4 . pp. 164-177. ISSN 21870764

Hubadillah, Siti Khadijah and Harun, Zawati and Othman, Mohd Hafiz Dzarfan and Ismail, A. F. and Wan Salleh, Wan Norharyati and Basri, Hatijah and Yunos, Muhamad Zaini and Gani, Paran (2016) Preparation and characterization of low cost porous ceramic membrane support from kaolin using phase inversion/sintering technique for gas separation: effect of kaolin content and non-solvent coagulant bath. Chemical Engineering Research and Design, 112 . pp. 24-35. ISSN 02638762

Hubadillah, Siti Khadijah and Othman, Mohd Hafiz Dzarfan and Harun, Zawati and Ismail, A. F. and Yuji, Iwamoto and Sawao, Honda and A. Rahman, Mukhlis and Jaafar, Juhana and Gani, Paran and Mohd Sokri, Mohd Nazri (2016) Effect of fabrication parameters on physical properties of metakaolin-based ceramic hollow fibre membrane (CHFM). Ceramics International, 42 . pp. 15547-15558. ISSN 02728842

Hubadillah, Siti Khadijah and Othman, Mohd Hafiz Dzarfan and Harun, Zawati and Ismail, A. F. and Yuji, Iwamoto and Sawao , Honda and A. Rahman, Mukhlis and Jaafar, Juhana and Gani, Paran and Mohd Sokri, Mohd Nazri (2016) Effect of fabrication parameters on physical properties of metakaolin-based ceramic hollow fibre membrane (CHFM). Ceramics International, 42 (14). pp. 15547-15558. ISSN 02728842

Hussein, Ahmed Abdulameer and Putra Jaya, Ramadhansyah and Abdul Hassan, Norhidayah and Yaacob, Haryati and Huseien, Ghasan Fahim and Wan Ibrahim, Mohd Haziman (2017) Performance of nanoceramic powder on the chemical and physical properties of bitumen. Construction and Building Materials, 156 . pp. 496-505. ISSN 09500618

I

Ismail, N. F. and Harun, Zawati and Badarulzaman, Nur Azam (2012) A comparative study of double layers Al2O3/Al2O3 and Al2O3/SiO2 prepared by microwave and natural drying. International Journal of Integrated Engineering , 4 (1). pp. 16-21. ISSN 2229838X

Ismail, Nur Farhani (2012) Consolidation of single and double layers ceramic structure. Masters thesis, Universiti Tun Hussein Onn Malaysia.

M

Mat Nawi, A. and Badarulzaman, Nur Azam (2014) Ceramics pottery fabrication using Plaster of Paris as filler: effect of particle size distribution on porosity and modulus of rupture. In: International Conference on X-Ray & Related Technique in Research and Industry (ICXRI2014), 11-13 August 2014 , Johor Bahru, Johor.

N

Natrah, Siti and Hussin, Rosniza and Taib, Hariati and Ahmad, Sufizar and Abd Rahman, Hamimah and Hanapi, lkhmal and Mat Kasa, Nassari (2015) Investigate suitable slnterlng temperature to produce claytan porcelain ceramic with addition of feldspar. In: International Conference on Knowledge Transfer (ICKT 2015), 1-3 December 2015, Putrajaya, Malaysia.

Noh, Mohamad Zaky and Jamo, Hasan Usman and Ahmad, Zainal Arifin (2016) The hardness properties of porcelain with substitution of quartz by rice husk ash at different soaking time. Materials Science Forum, 840 . pp. 39-43. ISSN 16629752

O

Ong, Tze Ching (2015) Modelling and simulation of drying process for ceramic membrane fabrication. PhD thesis, Universiti Tun Hussein Onn Malaysia.

S

Syed Abu Bakar, Sharifah Adzila and Ramesh, S. and Sopyan, I. and Hamdi, M. (2014) Magnesium doped hydroxyapatite through mechanochemical synthesis. In: International Conference on X-Ray & Related Technique in Research and Industry (ICXRI2014), 11-13 August 2014 , Johor Bahru, Johor.

Z

Zawawi, Rabiatul Adawiyah and Khairulzaman, Nurul Nasuha and Shamsuddin, Suhadir (2017) Effect of Cr-doped on crystalline phase, surface morphology and electrical properties of charge-ordered Nd0.75Na0.25MnO3 ceramics. Journal of Science and Technology, 9 (3). pp. 45-48. ISSN 26007924

This list was generated on Mon Jul 22 20:27:05 2019 MYT.