Items where Subject is "T Technology > TS Manufactures > TS155-194 Production management. Operations management"

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type
Jump to: A | B | C | D | F | H | I | J | K | L | M | N | O | P | R | S | T | U | W | Y
Number of items at this level: 120.

A

A. Djauhari, Maman and Mohd Salleh, Rohayu (2011) Robust hotelling's T2 control charting in spike production process. In: International Seminar on the Application of Science and Mathematics 2011, 1 - 3 November 2011, Putra World Trade Centre, Kuala Lumpur.

Ab Latif, Mohd Noor Hisyam (2013) Production management and improvement initiatives: case studies of two Malaysian manufacturing companies. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ab. Majid, Afiqah (2015) Pembangunan alat penilaian amalan lean untuk perusahaan kecil dan sederhana. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ab. Samat, Lena (2003) Development of software tool for production performance analysis. Masters thesis, German-Malaysia Institute.

Abdul Hamid, Nor Aziati and Hassan, Muhammad Hairulnizam and Abdullah, Nor Hazana and Ngadiman, Yunos (2016) The relationship between worker involvement factor and cleaner production factor towards green manufacturing performance. ARPN Journal of Engineering and Applied Sciences, 11 (8). ISSN 18196608

Abdul Jamil, Muhamad Faizal (2013) Design optimization of ANN-based pattern recognizer for multivariate quality control. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Rahim , Mohd Salleh (2011) Bottleneck-based heuristic for three machine flow shop scheduling. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdullah, Nurul Azma (2004) Job shop scheduling problem (JSSP). Masters thesis, University of East Anglia, 2004.

Abdullah, Abdul Aziz (2015) Pattern recognition for manufacturing process variation using statistical features artificial neural network. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdullah, Siti Nabilah Syuhada (2015) Identification of multiple influential observations in Weibull regression. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abu Bakar, Mohd Khairul Fadzly (2013) Design optimization and analysis on flexible manufacturing system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad, Siti Hasziani (2014) Integration of Program Evaluation and Review Technique (PERT), Gantt Chart and Genetic Algortihm. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad Bareduan, Salleh and Hasan, Sulaiman and Ariffin , Saparudin (2008) Finite scheduling of collaborative design and manufacturing activity: a Petri net approach. Journal of Manufacturing Technology Management, 19 (2). pp. 274-288. ISSN 1741-038X

Ahmed Elshayeb , Said Abdo (2010) Multi-sensor fusion for automated guided vehicle positioning. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Amaludin, Supardi (2012) Persepsi pengajar terhadap perlaksanaan amalan 5S di Kolej Kemahiran Tinggi MARA. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Atan@Yaakub, Siti Anisah and Ahmad, Kamilah (2013) Application of discrete event simulation for production line performance evaluation. In: Proceedings the 2nd International Conference on Global Optimization and Its Applications 2013 (ICoGOIA 2013) , 28-29 August 2013, Melaka, Malaysia .

Atan@Yaakub, Siti Anisah and Ramlan, Rohaizan and Tan, Geok Foong (2012) Cycle time reduction of a garment manufacturing company using simulation technique. In: Proceedings International Conference of Technology Management, Business and Entrepreneurship 2012 (ICTEMB2012), 18-19 December 2012, Melaka, Malaysia.

Azahari, Mohamad Azhar (2014) A study on extrusion of multiple material bonding for fused depostion modeling. Masters thesis, Universiti Tun Hussein Onn Malaysia.

B

Bareduan , Salleh Ahmad and Sulaiman, Hj. Hasan and Saparudin, Ariffin (1741) Finite scheduling of collaborative design and manufacturing activity: a Petri net approach. Journal of Manufacturing Technology Management, 19 (2). pp. 274-288.

Bon, Abdul Talib and Abdul Rahman, Asyran and Bolhassan, Eddi Azhar and Ali Nordin, Mohd Ashadi (2013) Optimize assembly production line using line balancing. In: Proceedings the 2nd International Conference on Global Optimization and Its Applications 2013 (ICoGOIA 2013) , 28-29 August 2013, Melaka, Malaysia .

Bon, Abdul Talib and Garai, Anny (2011) Just in time approach in inventory management. In: 2nd International Conference on Business and Economic Research (ICBER2011), 14-16 March 2011, Langkawi, Kedah.

Bon, Abdul Talib and Lim, Mandy (2015) Total productive maintenance in automotive industry : issues and effectiveness. In: Proceedings of the 2015 International Conference on Industrial Engineering and Operations Management (IEOM 2015), 3-5 March 2015, Dubai, United Arab Emirates (UAE).

Bon, Abdul Talib and Looi , Soon Kooi (2010) Forecasting model selection in Six Sigma concepts. In: Seminar Kebangsaan Sains Komputer dan Matematik, 21 – 22 Disember 2010, Kota Kinabalu, Sabah.

Bon, Abdul Talib and Rakiman, Umol Syamsyul (2013) Inspection station allocation in the production line by simulation: a case study. In: 6th Engineering Conference: energy and environment (ENCON2013), 2-4 July 2013, Kuching, Sarawak.

Bon, Abdul Talib and Tan, Siok Kee (2015) Implementation of lean manufacturing for productivity improvement in Malaysia. In: Proceedings of the 2015 International Conference on Industrial Engineering and Operations Management (IEOM 2015), 3-5 March 2015, Dubai, United Arab Emirates (UAE).

C

Chong, Chi Xin and Ngadiman, Yunos Identification of improvement factors through Overall Equipment Effectiveness (OEE) measurement in manufacturing company. Fakulti Pengurusan Teknologi dan Perniagaan. (Unpublished)

D

Daniyal, Hamdan (2004) Study on interoperability problems among CAD/CAM systems in automotive industry. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Dzulkifli, Bari’ah and Md Noor, Haris (2012) Assessing the organizational climate towards developing innovative work behavior: a literature review. In: International Conference on Business and Economic Research (3rd ICBER 2012), 12 - 13 March 2012., Bandung, Indonesia.

F

Faizan Marwah, Omar Mohd (2006) Performance evaluation of FDM water works system for ABS part. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

H

Hafsa, M. N. and Ibrahim , Mustaffa and Sharif, S. (2013) Investment casting using multi-jet modeling patterns: the thermogravimetric analysis of VISIJET® SR200 UV curable acrylate plastic. In: International Conference on Mechanical Engineering Research (ICMER2013), 1-3 July 2013, Kuantan, Pahang.

Haron, Siti Haizatul Aishah and Ramlan, Rohaizan (2015) Patient process flow improvement: value stream mapping. Journal of Management Research, 7 (2). pp. 495-505. ISSN 1941-899X

Hasnan, Khalid and Sh. Ahmad, Sh. Salleh and Yahya, Mohd Shahir and Razali, Imran and Ahmed Soomro, Aftab (2012) The framework and analysis tool to evaluate the effect of product design to the performance of manufacturing system. Other thesis, Universiti Tun Hussein Onn Malaysia.

Hassan, Mohd Fahrul and Mat Saman, Muhamad Zameri and Sharif, Safian and Omar, Badrul (2015) Sustainability evaluation of alternative part configurations in product design: weighted decision matrix and artificial neural network approach. Clean Technologies and Environmental Policy . ISSN 1618-954X

Hassan, Mohd Fahrul (2014) A framework for the sustainability evaluation of product configuration design. PhD thesis, Universiti Teknologi Malaysia.

Hassan, Mohd Hafiz (2014) Production improvement in a small and medium sized enterprise (SME) using lean production approach. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Husin, Siti Huzaimah (2005) CIM control design using GRAFCET. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

I

Ibrahim, Mohd Izham (2015) Feed rate effects on filament extrusion for freeform filament fabrication. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ibrahim, Mustaffa and Hafsa, M. N. (2014) Dimensional accuracy of additive manufacturing model with different internal structure for investment casting implementation. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Ismail, Zul-Atfi and Kasim, Narimah (2012) Improving maintenance management practices on conventional method at Malaysian polytechnic. In: Proceedings International Conference of Technology Management, Business and Entrepreneurship 2012 (ICTEMB2012), 18-19 December 2012, Melaka, Malaysia.

J

Jaya, Nasrullah (2015) Evaluation of different dispatching rules in computer integrated manufacturing using design of experiment techniques. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Johari, Dahlia (2014) An investigation using RFID in small medium industries (SMI) in Sarawak (kek lapis). Masters thesis, Universiti Tun Hussein Onn Malaysia.

K

Kamarudin, Khairu (2013) Parameter optimization for photo polymerization of mask projection micro stereolithography. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Kasim, Rozilah (2011) Community-based facilities management: theory and practice. Penerbit UTHM. ISBN 978-983-2963-35-7

Kasmin, Ashari (2014) Design for sustainability (D4S) in product development using solidworks software: a case study of redesign a sugar cane extractor machine. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Kassim, Noraniah (2012) New technique of producing removable complete denture using rapid tooling approach. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Khalid, Halim and Hashim, Haslifah and Mohamad, Massita and Khalid, Kamal and Khalid, Kamil (2012) The general model of Malaysian Households Housing Budget. In: International Conference on Business and Economic Research (3rd ICBER 2012), 12 - 13 March 2012., Bandung, Indonesia.

Kim Hao , Yeoh (2013) Efficiency improvement of assembly line: case study of bus seat manufacturer. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Krishnan, Subatra and Ngadiman, Yunos The influence factor of lean behaviour towards job performance in Fujitsu Component (M) Sdn. Bhd. Fakulti Pengurusan Teknologi dan Perniagaan. (Unpublished)

L

Liwan, Siti Radziah (2015) The framework of improving on-site materials tracking for inventory management process in construction projects. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Liwan, Siti Radziah and Kasim, Narimah and Zainal, Rozlin (2013) Materials tracking practices for inventory management in construction projects. In: 1st FPTP Postgraduate Seminar 2013, 23 December 2013, Fakulti Pengurusan Teknologi dan Perniagaan, UTHM .

M

Majid, Mariam (2014) Study of artificial neural network scheme application in manufacturing industry for monitoring-diagnosis bivariate process variation. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Manaf, Zaharah and Mohd. Razali, Mohammad Najib (2005) Facilities management knowledge : should it be included in tourism education? In: Asia Pacific Chrie Confence 2005.

Manaf, Zaharah and Razaly, Mohd Najib and Mastor, Saiful Hadi and Eni, Sabariah (2005) Facilities management: the prospect of its implementation in the tourism industry in Malaysia. In: International Conference On Tourism Development 2005, Park Royal Grand Plaza Hotel, Pulau Pinang.

Marian, Mohd Fairuz (2014) Synergistic artificial neural network scheme for monitoring and diagnosis of multivariate process variation in mean shifts. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Marsudi, Muhammad and Abdul Wahab, Dzuraidah and Che Haron, Che Hasan (2009) The application of spreadsheet model based on queuing network to optimize capacity utilization in product development. International Journal of Integrated Engineering, 1 (1). pp. 41-50. ISSN 1985-854X

Marwah, Omar Mohd Faizan (2016) Analysis of various rapid prototyping techniques for investment casting. PhD thesis, Universiti Teknologi Malaysia.

Masood, Ibrahim (2004) SPC charting procedure for monitoring of small and large shifts in process mean. Masters thesis, Universiti Teknologi Malaysia.

Masood, Ibrahim and Hassan, Adnan (2014) Bivariate quality control using two-stage intelligent monitoring scheme. Expert Systems with Applications: An International Journal, 41 (16). pp. 7579-7595. ISSN 0957-4174

Masood, Ibrahim and Hassan, Adnan (2010) Issues in development of artificial neural network-based control chart pattern recognition schemes. European Journal of Scientific Research, 39 (3). pp. 336-355. ISSN 1450216X

Masood, Ibrahim and Hassan, Adnan (2013) Multivariate process monitoring and diagnosis: a case study. Applied Mechanics and Materials , 315 . pp. 606-611. ISSN 1660-9336

Masood, Ibrahim and Hassan, Adnan (2013) A framework for multivariate process monitoring and diagnosis. Applied Mechanics and Materials , 315 . pp. 374-379. ISSN 1660-9336

Mat Deris, Mustafa (2013) Soft set approach for clustering web user transactions. Other thesis, Universiti Tun Hussein Onn Malaysia.

Md Ali, Zarina and Mat Deris, Mustafa and Mohd Mokhtar, Roselinda Aida and Isa, A.M. Job scheduling for dynamic data replication strategy based on federation data grid systems. In: Advances in Wireless, Mobile Networks and Applications. Springer-Verlag Berlin Heidelberg, pp. 283-292. (Unpublished)

Md Teni, Muhammad Hafizzuddin (2015) Pattern recognition for manufacturing process variation using ensembled artificial neural network. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamad, Fadzilah and Abdullah, Nor Hazana and Mohammad, Musli and Kamaruddin, Nor Kamariah (2013) Implementation of ISO50001 energy management system: an experience of a copper industry in Malaysia. In: 1st FPTP Postgraduate Seminar 2013, 23 December 2013, Fakulti Pengurusan Teknologi dan Perniagaan, UTHM .

Mohamed, Sulzakimin (2013) Facilities management for construction. Other. UTHM, UTHM.

Mohamed, Sulzakimin (2016) Initial findings on knowledge transfer practices towards sustainable development at Malaysian local government. International Journal of Trend in Research and Development, 3 (4). pp. 1-3. ISSN 2394-9333

Mohamed Elbishti, Entsar Kouni Alhaj (2015) The degree of JIT in mineral oil and asphalt industries in Libya. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohammad, Musli and Osman, M.R. and M.Y, Rosnah and Ismail, N. (2007) Critical success factors for implementing integrated management system (ims): survey and case studies results. In: World Engineering Congress 2007, 5 - 9 August 2007, Penang, Malaysia.

Mohammad, Musli and Osman, Mohd Rasid and Mohd Yusuff, Rosnah and Masood, Ibrahim and Yahya, Mohd Shahir and Mohd Azlis Sani, Md Jalil (2013) Strategies for integrating quality, environmental, safety and health management systems. Applied Mechanics and Materials , 315 . ISSN 1660-9336

Mohd Ariffin, Ahmad Azrizal (2015) Pattern recognition for manufacturing process variation using integrated statistical process control – artificial neural network. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Khairy, Afiz Azry (2013) Multivariate quality control using an integrated artificial neural network scheme: a case study in plastic injection molding industry. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Nasir, Siti Nasuha (2015) Flow shop scheduling using dual – bottleneck approach. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Nor, Mohd Fahrurazi (2012) Development of step-compliant system for turn-mill operations. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Pauzi, Nur Fazlinda (2015) Flowshop scheduling using artificial bee colony (ABC) algorithm with varying onlooker bees approaches. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Razali, Muhammad Najib and Ali, N. Mat and Othman, S. H. (2010) The information & communication technology management framework for facilities management business in Malaysia. In: 1st International Borneo Business Conference, 9-11 December 2010, Sutera Harbour Resort, Kota Kinabalu, Sabah.

Mohd Razali, Muhammmad Najib and Zainal Abideen, Mazaffar and Manaf, Zaharah (2005) Enviromental management system (EMS) using facilities management information system: a premilinary study. In: 4t h KUSTEM Annual Seminar On Sustainability Science Management.

Mohd Sohaimi, Nurul Adlihisam (2015) Integration of control chart and pattern recognizer for bivariate quality control. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Turan, Faiz and Omar, Badrul (2014) Design evaluation method for design engineer in manufacturing industries using integrated rough-grey analysis approach. Applied Mechanics and Materials, 660 . pp. 1052-1056. ISSN 1662-7482

Mokhtar, Mohd Faiz and Omar, Badrul and Muhd Nor, Nik Hisyamudin and Wan Mohamed, Wan Azlinda (2015) Supply chain sustainability: methodology of developing the score metrics. In: International Engineering Research and Innovation Symposium 2015 (IRIS), 12–13 September 2015, Putrajaya, Malaysia.

Mokhtar, Mohd Shukri (2015) Design optimization for the two-stage bivariate pattern recognition scheme. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Muin Hashim, Mohd Fadzil (2007) Prediction of punching life span for phosphor bronze stamping operation. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Muuti, Nasrul Azhan and Mohamed Amin, Mohamad Khairani and Amin, Mohd Arif (2008) Kajian tinjauan amalan kerja di kalangan juruteknik dengan polisi MS ISO 9001:2000 di makmal kejuruteraan, UTHM: tinjauan dari sudut prosedur pengoperasian penyelenggaraan dan kalibrasi. In: Regional Conference on Human Resource Development (RESERD 08), 14-16 January 2008, Primula Beach Resort, Terengganu.

N

Ng, Kei Hoa and Abdullah, Hasan Zuhudi (2014) Preliminary studies of the effects of polyethylene glycol/hydroxyapatite powder system for 3D printing application. In: International Conference on X-Ray & Related Technique in Research and Industry (ICXRI2014), 11-13 August 2014 , Johor Bahru, Johor.

Ngadiman, Yunos and Hussin, Burairah and Abdul Majid, Izaidin (2013) Exploring the overall equipment effectiveness (OEE) in an industrial manufacturing plant. In: Proceedings the 2nd International Conference on Global Optimization and Its Applications 2013 (ICoGOIA2013) , 28-29 August 2013, Melaka, Malaysia .

Ngadiman, Yunos and Hussin, Burairah and Abdul Majid, Izaidin (2012) A study of total productive maintenance implementation in manufacturing industry for generating greater profits. In: International Conference of Technology Management, Business and Entrepreneurship 2012 (ICTMBE2012), 18-19 December 2012, Renaissance Hotel, Melaka, Malaysia.

Ngadiman, Yunos and Hussin, Burairah and Abdul Majid, Izaidin A study of total productive maintenance implementation in manufacturing industry. In: International Conference On Management, Economics and Finance (ICMEF 2012), 15-16 October 2012, Kuching, Sarawak.

O

Osman, Saliza Azlina and A., Ourdjini and Mohd Ariff, Azmah Hanim (2014) The effect of nickel doping on SAC305 lead-free solders and EN(B)EPIG surface finish. In: 36th International Electronics Manufacturing Technology Conference (IEMT 2014), 11-13 November 2014, Johor Bahru, Johor.

P

Pakir Mohamed, Mohamed Ismail and Yeoh , Kim Hao and Wan Yusoff, Wan Fauziah (2012) Improvement of assembly line: a case study of bus seat manufacturer in Malaysia. In: Proceedings International Conference of Technology Management, Business and Entrepreneurship 2012 (ICTEMB2012), 18-19 December 2012, Melaka, Malaysia.

R

Raja Mohd Rasi, Raja Zuraidah (2015) Relationship between lean production and operational performance in the manufacturing industry. In: Proceedings of the 2015 International Conference on Industrial Engineering and Operations Management (IEOM 2015), 3-5 March 2015, Dubai, United Arab Emirates (UAE).

Raja Mohd Rasi, Raja Zuraidah and Ramlan, Rohaizan and Perera, Terence and Azmi, Noor Juliana (2014) “Enviroprenurial” value chain - a conceptual framework for Malaysian Small and Medium Enterprises. In: 4th International Conference On Engineering and Operation Management (IOEM) 2014, 7-9 Jan 2014, Bali, Indonesia.

Rakiman, Umol Syamsyul (2013) Production line: effect of different inspection station allocation under accepts reject inspection policy. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Rakiman, Umol Syamsyul and Bon, Abdul Talib (2013) Production line: effect of different inspection station allocation under accepts reject inspection policy. Other thesis, Universiti Tun Hussein Onn Malaysia.

Rakiman, Umol Syamsyul and Bon, Abdul Talib and Atan, Siti Anisah and Ramlan, Rohaizan (2012) Effect of different machining approach on productivity. In: International Conference of Technology Management, Business and Entrepreneurship 2012 (ICTMBE2012), 18-19 December 2012, Renaissance Hotel, Melaka, Malaysia.

Raman, I. and Syafiq, M. and Sa'ude, N. and Ibrahim , Mustafa and Wahab, Md Saidin (2012) Viscosity effect on piezoelectric actuated nozzle in generating micro droplet. In: International Conference on Advanced Material Engineering & Technology (ICAMET 2012) , 28-30 November 2012, Penang, Malaysia.

Ramlan, Rohaizan and Ang , Poh Cheng (2016) The conceptual framework of production planning optimisation using fuzzy inference system with Tsukamoto. International Journal of Industrial Management (IJIM), 2 . pp. 80-91. ISSN 22899286

Ramlan, Rohaizan and Raja Mohd Rasi, Raja Zuraidah and Mohd Raya, Nur Diyana (2014) Combine forecasting method performances for demand forecasting : an exploratory study. Journal of Applied Sciences Research, 11 (4). pp. 1-6. ISSN 1819-544X

Romalan, Gaddafi M. and Sulaiman, Erwan and Ahmad, Md Zarafi and Omar, Mohd Fairoz and Jenal, Mahyuzie (2015) Actual prototype analysis floor plan for general electric machine. ARPN Journal of Engineering and Applied Sciences, 10 (16). pp. 7070-7074. ISSN 1819-6608

S

Sarpin, Norliana and Yang, Jay Bo Xia (2016) Developing a people capability framework to promote sustainability in facility management practices. Facilities, 34 (7/8).

Sh Ahmad, Sh Saleh (2009) Optimising manufacturing schedule using petri net. Journal of Science and Technology, 1 (1). pp. 27-42. ISSN 1985-8809

Sh Ahmad, Sh Salleh (2009) Bottleneck adjacent matching heuristics for schedulling a re-entrant flow shop with dominant machine problem. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Sh Ahmad , Sh Salleh and Anak Gani, Isstella Mengan (2013) Optimization algorithms for re-entrant flow shop scheduling heuristic using bottleneck approach. Other thesis, Universiti Tun Hussein Onn Malaysia.

Shafie, Fazira and Wan Yusoff, Wan Zahari (2013) FM help desk : user complaint system as an FM approach for facilities management services in Universiti Tun Hussein Onn Malaysia (UTHM). Other thesis, Universiti Tun Hussein Onn Malaysia.

Shiau , Wei Chan and Omar, Siti Sarah and Ramlan, Rohaizan (2016) The relationship between entrepreneurial orientation and manufacturing operations of Malaysian SMEs rural entrepreneurs. Advanced Science Letters, 22 (5/6).

Shomran, Hadeer Taleb (2014) Simulation study of statistical process control schemes performance for monitoring variation. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Shukri, M. S. and Marwah@Omar, Omar Mohd Faizan and Sharif, S. and Ibrahim, Mustaffa and Mohamad, Elmy Johana (2015) Collapsibility behaviour of ABS P400 pattern built by portable FDM machine. In: 4th International Conference on Advanced Manufacturing Technology (ICAMT 2015), 20-22 September 2015, Johor Bahru, Malaysia.

Sidek, Kamsidi @ Abd Malek (2013) Production improvement in ACM manufacturing company using lean manufacturing approach. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sidek, Noor Azizah and Nawawi, Azli and Bareduan, Salleh Ahmad (2015) Improving the manufacturability and assembly efficiency of kapok seed separator. In: Engineering Technology International Conference 2015, 10-11 August 2015, Kuta, Bali, Indonesia.

T

Tee, Yih Jye and Ngadiman, Yunos Identification the critical lean wastes in food industry using FMEA for manufacturing performance improvement. Universiti Tun Hussein Onn Malaysia.

U

Utami, Silvia Firda (2016) Modeling analytical hierarchy process and Fuzzy Inference System Tsukamoto for production planning at a palm oil company in Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

W

Wahab, M. S. and Dalgarno, K. W. and Cochrane, R. F. (2009) Development of polymer nanocomposites for rapid manufacturing application. International Journal of Integrated Engineering, 1 (1). pp. 51-59. ISSN 1985-854X

Wahab, Md Saidin (2009) Development of wood base material for rapid prototyping process. Other thesis, Universiti Tun Hussein Onn Malaysia.

Wahab, Md Saidin and Sidek, Kamsidi @ Abd Malek and Yahya, Mohd Shahir and Ahmat, Muhammad Mustaqim (2014) Production improvement in an aircraft manufacturing company using value stream mapping approach. Applied Mechanics and Materials, 660 . pp. 1038-1042. ISSN 1662-7482

Wahab, Md Saidin and Wagiman , Abdullah and Zuki, N. M. (2009) Rapid prototyping of wood-based material. In: Proceedings of MUCEET2009 Malaysian Technical Universities Conference on Engineering and Technology, June 20-22, 2009, MS Garden,Kuantan, Pahang, Malaysia.

Wahab, Md Saidin and Wagiman , Abdullah and Zuki, N. M. Rapid prototyping of wood-based material. In: The 3rd Malaysian Technical Universities Conference on Engineering and Technology (MUCEET2009), 20-22 June 2009, Kuantan, Pahang.

Wan Yusoff, Wan Zahari and Ismail, Maziah (2008) Fm-servqual: A new approach of service quality measurement framework in local authorities. Journal of Corporate Real Estate, 10 (2).

Y

Yeoh , Kim Hao (2013) Efficiency improvement of assembly line: case study of bus seat manufacturer. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Yusof, Yusri and Keith Case, Keith Case (2010) Design of a STEP compliant system for turning operations. Robotics and Computer-Integrated Manufacturing, 26 (6). pp. 753-758. ISSN 0736-5845

Yusof, Yusri and Latif, Kamran (2014) Survey on computer-aided process planning. The International Journal of Advanced Manufacturing Technology, 330 . ISSN 0268-3768

Yusof, Yusri and Samson, Mohd Noor Hakim (2011) Manufacturing of biocompatible implant component using rapid prototyping technology. Advanced Materials Research, 213 . pp. 25-30. ISSN 1022-6680

This list was generated on Mon Aug 21 10:19:29 2017 MYT.