Items where Subject is "T Technology > TS Manufactures > TS200-770 Metal manufactures. Metalworking"

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type
Jump to: | A | B | D | E | H | J | K | L | M | N | O | S | T | W
Number of items at this level: 40.

Ahmad, Rosli (2006) Optimisation of the squeeze forming process. PhD thesis, University of Wales Swansea.

A

Abdullah, Hasan Zuhudi and Sorrell, C.C. (2012) Titanium Dioxide (TiO,) films by anodic oxidation in phosphoric acid. Advanced Materials Research, 545 . pp. 223-228. ISSN 1022-6680

Abdulmalik, S. S. and Ahmad, Rosli (2014) Fabrication of AA6061-0/RHA surface composite via friction stir processing. Applied Mechanics and Materials, 660 . pp. 214-218. ISSN 1662-7482

Ahmad, Rosle and Talib, N. (2011) Experimental study of vortex flow induced by a vortex well in sand casting. Revue de Métallurgie, 108 (03). pp. 129-139. ISSN 0035-1563

Ahmad, Rosli and Gethin, D. T. and Lewis, R. W. (2012) Design Element Concept of squeeze casting process. Applied Mathematical Modelling, 36 (10). pp. 4760-4788. ISSN 0307-904X

Anak John, Gary (2014) Investigate welding parameter optimization for weld bead surface quality using MIG technology. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Anggono, Agus Dwi and Siswanto, Waluyo Adi and Omar, Badrul (2012) Algorithm development and dpplication of spring back compensation for sheet metal forming. Research Journal of Applied Sciences, Engineering and Technology, 4 (14). pp. 2036-2045. ISSN 2040-7467

Anggono, Agus Dwi and Siswanto, Waluyo Adi and Omar, Badrul (2011) Combined method of spring-forward and spring-back for die compensation acceleration. In: International Conference on Modeling, Simulation and Applied Optimization (ICMSAO), 19-21 April 2011, Kuala Lumpur. (Submitted)

Anggono, Agus Dwi and Siswanto, Waluyo Adi and Omar, Badrul (2011) Finite Element Simulation for springback prediction compensation. In: International Conference on Advanced Science, Engineering and Information Technology 2011, 14-15, January 2011, Hotel Equatorial Bangi-Putrajaya.

Asmawi, Rosli and Ibrahim, Mohd Halim Irwan and Mohd Amin, Azriszul and Mustafa, N. and Alawi, N. (2014) Mixing study of aluminium waste as metal powder for waste polystyrene binder system in Metal Injection Molding (MIM). Applied Mechanics and Materials , 660 . pp. 239-243. ISSN 1660-9336

B

Buja, Andy Anak (2013) Decision making with analytical hierarchy process (AHP) for viable manufacturing of SCRE. Masters thesis, Universiti Tun Hussein Onn Malaysia.

D

Dwi Anggono, Agus (2014) Combined method for die compensation in sheet metal forming. PhD thesis, Universiti Tun Hussein Onn Malaysia.

E

Elfallah, Saleh S Saleh (2012) Analysis of mechanical properties and microstructure of multiple die cavity products produced in vertical and horizontal arrangement by gravity die casting. Masters thesis, Universiti Tun Hussein Onn Malaysia.

H

Harun, Zawati and Kamarudin, Noor Hasliza and Ibrahim, Mustaffa and Idris, Maizlinda Izwana and Ahmad, Sufizar (2014) Reinforced green ceramic shell mould for investment casting process. In: International Conference on X-Ray & Related Technique in Research and Industry (ICXRI2014), 11-13 August 2014 , Johor Bahru, Johor.

J

Jamian, Saifulnizan and Yutiman, Safwan and Hehsan, Haffidzudin (2015) AL LM6 hollow cylinder fabricated using centrifugal casting. In: International Engineering Research and Innovation Symposium (IRIS 2015), 12–13 September 2015, Putrajaya, Malaysia.

K

Katimon, Mohd Nizam and Sohimi, Mohd Noor Syafiq (2012) Evaluation of dry film lubricant using deep drawing test. Other thesis, Universiti Tun Hussein Onn Malaysia.

L

Lai, Chee Sern and Hashim, Jamaluddin Development of multi-position welding table as teaching and learning tool for the subject of welding technology. In: Konvensyen Teknologi Pendidikan ke-18, 16-19 September 2005 , Terengganu.

M

Marwah @ Omar, Omar Md Faizan and Sharif, Safian and Sulaiman, Sulaiman and Ibrahim, Mustaffa and Mohamad, Elmy Johana (2014) Direct investment casting numerical study for ABS P400 FDM materials. Applied Mechanics and Materials, 660 . pp. 99-103. ISSN 1662-7482

Mohd Amin, Azriszul and Ibrahim, Mohd Halim Irwan and Asmawi, Rosli (2014) Mixing homogeneity and rheological characterization for optimal binder formulation for metal injection moulding. Applied Mechanics and Materials , 607 . pp. 181-184. ISSN 1660-9336

Mohd Amin, Azriszul and Ibrahim, Mohd Halim Irwan and Asmawi, Rosli and Mustapha, N. (2014) The influence of sewage fat composition on rheological behavior of metal injection moulding. Applied Mechanics and Materials, 660 . pp. 38-42. ISSN 1662-7482

Mohd Idrus, Noor Hafiza (2013) Anodic oxidation of titanium in sulphuric acid (H2SO4) for biomedical application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Nawi, Nazri and Harun, Zawati and Wahid, Noorhaniza Defective casting diagnosing via an enhanced knowledge hyper-surface method. Applied Mechanics and Materials Vols 229-231 .

Mohid, Zazuli and Liman, M.A. and Rahman, M.R.A. and Rafai, Noor Hakim and Abd Rahim, Erween (2014) Dissimilar materials laser welding characteristics of stainless steel and titanium alloy. Applied Mechanics and Materials, 465 . pp. 1060-1064. ISSN 1662-7482

Mohid, Zazuli and Rashid, Z.A. and Wagiman , Abdullah and Rafai, Noor Hakim and Abd. Rahim , Erween Titanium alloy welding using middle range power pulsed wave laser. Applied Mechanics and Materials, 372 . pp. 486-490. ISSN 1662-7482

N

Ngatiran, Norida (2003) Penghasilan dan penilaian buku panduan prosedur pematerian komponen elektronik. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

O

Omar, Badrul and Hassan, S. and Rahim, E. A. and Kamarudin, K. and Thamizhmanii, S. (2007) An investigation of multi-roller burnishing Process on mild steel and copper metal. In: World Engineering Congress 2007, 5-9 August 2007, Penang, Malaysia.

Omar Baki, Mohamad Faezal (2003) Study on relationship between burr and cutting clearance of commonly used sheet metals in automotive industry in Malaysia in relation to piercing and blanking processes. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Osman, Saliza Azlina and Ourdjini, Ali and Amrin, Astuty and Idris, Siti Rabiatull Aisha (2013) Effect of solder volume on interfacial reaction between SAC405 solders and EN(B)EPIG surface finish. Advanced Materials Research, 845 . pp. 76-80. ISSN 1022-6680

Othman, Mohd Hilmi (2015) The modelling of processing conditions for polypropylene-nanoclay integral hinges at high heat exposure. PhD thesis, Universiti Tun Hussein Onn Malaysia.

S

Sahdan, Mohd Zainizan and M. F. Nurfazliana, M. F. Nurfazliana and Embong, Zaidi and Ahmad, Z. and Saim, Hashim (2015) Fabrication and characterization of crystalline cupric oxide (CUO) films by simple immersion technique. In: 2nd International Materials, Industrial & Manufacturing Engineering Conference (MIMEC 2015), 4-6 February 2015, Bali Nusa Dua Convention Center, Bali, Indonesia.

Sahidi, Sujanuriah (2013) Friction stir welding of dissimilar metal. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Saleh, S. S. and Abdullah, Hasan Zuhudi and Sorrell, C.C. (2014) The anatase formation on anodised titanium in sulphuric acid. In: International Conference on X-Ray & Related Technique in Research and Industry (ICXRI2014), 11-13 August 2014, Johor Bahru, Johor.

Samekto, Haryanti and Sani, Winardi and Sebayang, Darwin and Hasan, Sulaiman and Yusof, Mustafa (2011) Material, constitutive model of dual phase steel and springback simulation in the metal forming application. Project Report. Universiti Tun Hussein Onn Malaysia. (Unpublished)

Shamsudin, Shazarel and Phoon, Chee Yoon (2012) Investigation on mechanical properties of pulsed Nd:YAG laser welding on AISI 304 stainless steel to AISI steel. Applied Mechanics and Materials , 117 . pp. 402-408. ISSN 1660-9336

Siswanto, Waluyo Adi and Anggono, Agus Dwi and Omar, Badrul and Jusoff, Kamaruzaman (2014) An alternate method to springback compensation for sheet metal forming. The Scientific World Journal, 2014 (301271). pp. 1-13. ISSN 1537-744X

T

Tahar, Mohd Salleh and Esa, Ahmad and Mohd Salleh, Zuan Azhary and Yusof, Yusri and Mohd Salleh, Zuliazura (2012) Heat stress among 500-660 mm pipe workers on oil rig jackets assembly. Educational Technology . pp. 8937-8940. ISSN 2229-712X

Thamizhmanii, Sivaprakasam and Sukor, Mohd Azizee and Sulaiman, Sulaiman (2013) Solid state friction stir welding (FSW) on similar and dissimilar metals. Lecture Notes in Engineering and Computer Science, 3 . ISSN 2078-0958

Thamizhmanii, Sivaprakasam and Sukor, Mohd Azizee and Sulaiman, Sulaiman (2013) Solid state friction stir welding (FSW) on similar and dissimilar metals. In: Proceedings of World Congress on Engineering (WCE 2013) , 3-5 July 2013, Imperial College London, United Kingdom .

W

Wahab, Md Saidin (2003) Defect detection in high pressure die casting product using image processing technology. Masters thesis, University of South Australia.

Wan Yusop, Wan Mohd Fazli (2014) Faktor yang mendorong pencapaian akademik pelajar dalam program kimpalan di kolej vokasional. Masters thesis, Universiti Tun Hussein Onn Malaysia.

This list was generated on Sat Apr 29 03:44:35 2017 MYT.