UTHM Institutional Repository

Browse by Type

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Jump to: | . | A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | Y | Z
Number of items: 2847.

Musa, Muhammad Yahaya (2017) A cognitive task approach on the influence of office automation software in secretarial practice. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdullah, Noryusliza (2015) A hybrid semantic search technique for web information retrieval. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad Sarai, Norazlina (2015) Improvement on mechanical properties sodium feldspar for porcelains tableware. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Meor Zainol, Wan Saidatulakma (2015) Analysis of electromyograph (emg) for controlling wheelchair motion. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Low, Jia Wei (2015) The properties of sputtered copper oxide thin film for sensing application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Tan, Siun Cheng (2015) Printing conductive ink tracks on textile materials. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Adamu, Muhammad Sani (2015) The relationship between corporate social responsibility and company’s financial performance: the case of top one hundred companies in Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

A Talip, Balkis (2013) The development of a rapid diagnostic system for difficult to culture human pathogens. PhD thesis, University of Ulster.

Dharmaraj, Philips (2012) Modeling of three phase inverter for photovoltaic application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Arumugam, Thillai Nayagee (2009) Experimental study on resilient modulus of liquid silicon dioxide (SIO2) stabilized subgrade soil. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Adon @ Mohd Don, Rashidah (2009) Simulation study on various shapes of pad footing sub-structure on Batu Pahat soft soil. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ab. Rahman , Munirah (2008) Analisis dan penilaian prestasi lengah lepas tangan menggunakan protokol pencetusan sesi (SIP) bagi sistem terintegrasi UMTS-WLAN. Masters thesis, Universiti Kebangsaan Malaysia.

Abdullah, Mohammad Faiz Liew (2006) Techniques for signal to noise ratio adaptation in infared optical wireless for optimisation of receiver performance. PhD thesis, University of Warwick.

Ahmad, Rosli (2006) Optimisation of the squeeze forming process. PhD thesis, University of Wales Swansea.

Hanafi , Noor Hasnizam (2004) Energy forecast using linear regression methods. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Maimun @Mohmood, Ainor Izmira (2004) Kajian keberkesanan penggunaan modul pembelajaran bagi mata pelajaran Sistem Elektronik 2 (E2002) bagi pelajar Kejuruteraan Elektrik di politeknik. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Jamil, Norhayati (2004) Ketrampilan teknikal dan generik pekerja lepasan Sijil Kemahiran Malaysia di industri mampu menjana k-workers mengikut perspektif pengurus industri. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Abu Bakar, Noor Hamiza (2003) Penghasilan modul pengajaran kendiri mata pelajaran Seni Reka Tekstil bagi tajuk Kaedah Mencetak. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Abdul Mutalib, Roshila (2002) Pembinaan Sistem Pangkalan Data Pusat Sumber KUiTTHO:kajian terhadap penggunaan pusat sumber JPTV, FTK KUiTTHO dengan sistem pangkalan data yang dibina. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Abdullah, Mohamad Faiz Liew (1999) Power budget analysis for broadcast passive optical network. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

.

.A.Hawig , Abdurauf.A (2011) CFD study on the heat transfer in vertical rifled tube with different helical angles. Masters thesis, Universiti Tun Hussein Onn Malaysia.

A

Azali, Noor Atiqah (2018) Breakdown characteristic of palm oil and coconut oil under AC and DC voltage with different moisture rate. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdullah, Muhammad A'imullah (2018) Delamination damage of carbon fiber-reinforced polymer composite laminates under cyclic shrear-induced loading conditions. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ahmed Al-Subari, Musaed Mohammed (2018) Investigating the application of frequency response analysis for diagnosing tap changer on power transformer. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Rahman, Abdul Khairi (2018) Proportional resonant current controller for 7-level multilevel inverter with reduced switching. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Latif, Hanif (2017) Acoustical characteristics of oil palm Mesocarp fibres. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Hamid, Norhadilah (2017) Antedecents and impacts of collaboration in innovation commercialization performance. PhD thesis, Universiti Putra Malaysia.

Al Allam, Allam Musbah (2017) Asphalt binder and mixture performance using Batu Pahat soft clay as modifier. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Ayop, Sallehuddin Shah (2017) Assessment of residual strength of corrosion damaged concrete structures. PhD thesis, Heriot-Watt University.

Akram, Muhammad (2017) Characterization of an algebraic structure and its fuzzifications. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Ayob, Mohd Erdi (2017) Characterization of the measurement uncertainty for the electromagnetic conducted and radiated emission test. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Alshameri, Badee (2017) Combining seismic and geotechnical methods to improve the prediction of physical soil properties. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Amran, Nur’izzati Aqirah (2017) Domain hasil pembelajaran berasaskan kerja (PBK) dalam latihan industri terhadap pelajar politeknik berdasarkan persepsi pembimbing. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abu Bakar, Muhamad Subri (2017) Effect of argentum on development and properties of composite cathode La0.6Sr0.4Co0.2Fe0.8O3-δ – SDCC-Ag for low temperature solid oxide fuel cell (LTSOFC). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abd Rahman, Muhammad Faqhrurrazi (2017) Effect of liquid properties (water and lime juice) on spray characteristics of deflected flat spray nozzle (AL-75). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abuhamra, Suaad Ghait Abdarrahman (2017) Effect of storage temperature and duration on physico-chemical properties, microbial growth and nutritional composition of papaya and banana fruits. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdullah, Sharifah Sakinah (2017) Electrodeposition of nickel/copper multi-nanolayer by dual bath technique at ambient temperature. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Latif, Abdul Afiff Fiqhry (2017) Experimental study of biomedical stainless steel 316L vibration assisted milling using retrofittable 1D UVAM worktable. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Aziz , Mohd Faisalluddin (2017) Faktor-faktor mempengaruhi niat untuk berkongsi pengetahuan dalam kalangan staf akademik di Universiti Tun Hussein Onn Malaysia. Masters thesis, Universiti Teknologi Malaysia.

Abd Rahman, Nur Adilah (2017) Fundamental study of pulse electric field effects on HeLa cell cultured over extracellular matrix protein micropatterned surface. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abas, Muhamad Azahar (2017) Good governance in National Solid Waste Management Policy (NSWMP) implementation: a case study in Kuala Lumpur. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Adon, Nur Atiqah (2017) Hardware implementation for cardiac electrical excitation and conduction using an FPGA. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Atiku, Hauwa Maijidda (2017) Harvesting of microalgae Botryococcus sp. through phycoremediation of bathroom greywater. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmed, Fuad Hassan (2017) Improving construction materials management practices in construction sites. Masters thesis, Universiti Tun Hussein Onn Malaysia.

A Rahman, Nurhimmah (2017) Keberkesanan penggunaan modul KUSMAPP dalam meningkatkan pencapaian matematik. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abd Ghaffar, Nurhaliza (2017) Keperluan latihan kontraktor kelas F dalam sektor pembinaan. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdi, Ahmed Nur Elmi (2017) MP4-Karver: carving of corrupted MP4 videos using ASMD repairing technique. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Alias, Ahmad Rizal (2017) Model ramalan permintaan perumahan mengikut kategori rumah di negeri Johor. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Ali Nasir, Mohamed Saleh (2017) Modelling and analysis of facts devices for stability improvement in power system using MATLAB software. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdullah, Rosmahalil Azrol (2017) Motivasi penglibatan pelajar UTHM terhadap aktiviti kesukarelawan. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Al-Subari, Saleh Nasser (2017) Online banking adoption among academicians at MTUN universities in Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

A Razak, Aliff Hisyam (2017) Optimisation of silicone-based dielectric elastomer transducers by means of block copolymers – synthesis and compounding. PhD thesis, DTU Chemical Engineering.

Ahmad, Mohd Jalil (2017) Pembangunan kerangka kompetensi pensyarah technical and vocational education and training (TVET) di Kolej Komuniti. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad, Zanariah (2017) Pembangunan modul pedagogi kelas berbalik berasaskan pembelajaran reflektif untuk politeknik premier. PhD thesis, Universiti Malaya.

Abdul Rahman, Siti Norhaida (2017) Pendekatan gamifikasi dalam pengajaran dan pembelajaran terhadap murid tingkatan dua bagi topik ungkapan algebra. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdullah, Haslina (2017) Pengoptimuman jarak laluan mata alat menggunakan algoritma koloni semut untuk proses pengisaran poket. PhD thesis, Universiti Kebangsaan Malaysia.

Abdullah, Noorhaslinda (2017) Performances of axial energy absorptions of cylindrical woven kenaf fiber reinforced polyester composites. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmed, Wurochekke Anwaruddin (2017) Phycoremediation of artificial bathroom greywater in village houses using microalgae Botryococcus sp. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Abubakar Pindar, Zahraddeen (2017) PinTar: message authentication code based on quasigroup and permutation compression function. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Bakil, Siti Natrah (2017) Reducing sintering temperature of Claytan stoneware using two different fluxes (soda lime silicate and borax decahydrate). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ab. Razak, Abdul Rafiq (2017) Removal of nutrients and heavy metals from domestic and industry using Botryococcus sp. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Amin, Md Ruhul (2017) Self-synchronized converter for fast synchronization between low voltage microgrid and inverter connection. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Aminnuddin, Mohd Hazim Fadli (2017) Simulation and experimental study of double holes film cooling. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Andsaler, Adiba Rhaodah (2017) Simulation of variant ambient condition and injection pressure on mixture formation of biodiesel spray. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdullah, Muhamad Firdaurs (2017) Soil-roots performance of Pennisetum setaceum ‘Rubrum’ on mechanical soil strength. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abd Hamed, Noor Kamalia (2017) Study on photocatalytic performance of rutile phased TiO2 micro size rods/flowers film towards methyl orange degradation. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Adamu, Mahmoud Auwal (2017) Synthesis and characterization of conducting polyaniline/iron oxide (PAni/Fe3O4) nanorods for immunosensing application. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad, Ida Laila (2017) Tapered microfluidic device for multi-particle separation based on sedimentation principle. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Anis, Mohd Aris (2017) Ujaran berimplikatur dalam teks Sulalatus Salatin. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Abdulhasan Al-Jarah, Ali Husam (2017) A centralized localization algorithm for prolonging the lifetime of wireless sensor networks using particle swarm optimization in the existence of obstacles. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad, Noor Aqilah (2017) A comparative study on wear and corrosion behaviour of tungsten carbide-nickel and tungsten carbide-cobalt high velocity oxy-fuel (HVOF) for carbon steel blade. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Azizan, Mohd Fikri (2017) A comprehensive fractal approach in determination of the effective thermal conductivity of gas diffusion layers in polymer electrolyte membrane fuel cells. Masters thesis, Universiti Tun Hussein Onn Malaysia.

A. Rahman , Khairunnisa (2017) The development of energy efficiency estimation system for domestic housing by using quality function deployment approach. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Abu Bakar, Siti Zulaikha (2017) A functional link neural network with modified cuckoo search for prediction tasks. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ajala, Amkpa Job (2017) A study on thermal conductivity of six unexplored Nigerian clays for possible refractory and insulating materials. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Abbas, Zeyad Adnan (2016) Comparison study of sorting techniques in dynamic data structure. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Adnan, Noor Quratul Aine (2016) Acoustic performance of hybrid renewable polyurethane blended with synthetic epoxy foam with and without titanium dioxide filler upon irradiated exposure. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Akhiar, Siti Khairul Bariyyah (2016) Amalan dan penggunaan herba dalam perubatan tradisional melayu selepas bersalin di Zon Tengah, Semenanjung Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmed Adam, Labeeb Mohammed (2016) Co-existence and interference investigation between LTE-TDD and LTE-FDD under the frequency band between 2500 to 2690 MHz for Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Assi, Saad Ali (2016) Coverage enhancement in WCDMA cellular network using repeater and MAHS amplifier. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Adan, Nor Faezah (2016) Design a filter for harmonics caused by non-linear load and resonance caused by power factor correction capacitor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad Po'ad, Farhana (2016) Design and implementation of multiplatform indoor and outdoor tracking system. PhD thesis, Universiti Sains Malaysia.

Ahmad , Md. Zarafi (2016) Design and optimisation of outer-rotor hybrid excitation flux switching motor. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Abd Rahman, Ramhuzaini (2016) Dynamical adaptive backstepping-sliding mode control for servo-pneumatic positioning applications: controller design and experimental evaluation. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Abubakar, Malala Abubakar (2016) Effects of voltage sag during starting of an induction motor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abd Wahab, Nursu'aidah (2016) Forecasting gold price using autoregressive integrated moving average and artificial neural network model. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Rahman, Abdul Rashid (2016) Friction material (metal reinforcement) analysis of brake pad for light rail train system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ani, Fauziah (2016) Hubungan penyertaan, kepimpinan dan pendayaupayaan dalam kalangan ahli Pergerakan Wanita Pekebun Kecil di Johor, Malaysia. PhD thesis, Universiti Putra Malaysia.

Alhaji Ali, Zannah (2016) Improving skilled workers’ performance in construction projects in Nigeria. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Asha'ri, Aifaa Husna (2016) Kemahiran boleh pindah dalam kalangan pelajar kejuruteraan di IPTA. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abu Yazid, Fakhrurrazy (2016) Kesan penggunaan bahan pengajaran dan pembelajaran terhadap pencapaian murid tahun 4 dalam subjek reka bentuk dan teknologi. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Rahim, Mohd Hisyam (2016) Keserasian fasilah al-Qur'an: kajian dari aspek ilmu Munasabat. PhD thesis, Universiti Malaya.

Abdullah, Nurhanim Saadah (2016) Life and career skills among TVET students in polytechnics in Malaysia. PhD thesis, Universiti Sains Malaysia.

Anwar Lashari, Saima (2016) Mammogram images classification based on fuzzy soft set. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Samad Ali, Abdul Kader Omer (2016) Ownership structure, corporate governance and firm performance in Malaysia. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Amir, Ahmad Irsyaduddin (2016) Pengaruh pemanduan bas rapid terhadap penggunaan bahan bakar. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Aziziuddin, Nazihan (2016) Performance evaluation of Pegasis and leach protocol using Matlab based simulation platform. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ab Rahman, Amera Ratia (2016) Performance of physical shell foundation model under axial loading. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdullah, Saiful Asmawi (2016) Potensi pelaksanaan pendekatan Building Information Modeling (BIM) dalam praktis pengurusan fasiliti. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Azmir, Nor Azali (2016) Prediction model of hand arm vibration exposure among hand-held grass-cutters in Malaysia. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Rahim, Ahmad Shayuti (2016) Properties and environmental impact from mosaic sludge industry incorporated into fired clay bricks. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ali Al Gamili, Abdullah Saleh (2016) Red blood cell segmentation and classification method using MATLAB. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abd Ghani, Mohd Khairul Zaimy (2016) Relationship of moulding pressure and weight of granulate in improving the mechanical and characteristics of biopolymer from renewable resources. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdullah, Shakila (2016) Removal of oil and grease from agro-food industrial effluent using Serratia marcescens SA30 and its kinetic study. PhD thesis, Universiti Teknologi Malaysia.

A Ibrahim Kutty, Nadira Mariam (2016) Simulation on passenger movement for LRT Kelana Jaya line KL Sentral station using Vissim software. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ali Salem, Ali Ahmed (2016) Study of lightning ground flashes interaction with railway lines. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Rashid, Zarina (2016) Tahap kesediaan guru dalam aspek pengetahuan dan keperluan latihan berfokuskan aplikasi KBAT. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmed, Maryam Temitayo (2016) Test suite reduction in Android application using refactoring. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Abubakar, Bashir (2016) Understanding the influence of ICT on pedagogical practices in the teaching of electronics courses in Nigerian TVET institutions. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abd Halim, Muhamad Rais (2016) Web transcript verification using dual check digit as secure number. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abu Samah, Ahmad Abqari (2016) Whole body vibration analysis for ride quality of LRT passenger. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Alaian, Ahmad Eshtiwey (2016) The development of a fixed wing aircraft analysis and design flight dynamic software. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Ab Rahman, Nurul Hidayah (2016) An evidence-based cloud incident handling framework. PhD thesis, University of South Australia.

Ahmed Mohamed, Sa'diya (2016) The role of perceived organisational support on employee's job performance: an empirical study on private telecommunication companies in Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdulaziz Al-Shalif, Abdullah Faisal (2016) The used of ureolytic and sulphate reduction bacteria to improve properties and self-healing of concrete. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdelsalam, Omran Maki (2015) Comparative study of influence of image size on the performance testing using loadrunner. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ali, Hafiz Aizat (2015) Comparison fine spray nozzle for two phase flow within experimental and simulation. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ariffin, Arihasnida (2015) Kesan persembahan masalah berbentuk grafik dan animasi bagi pembelajaran berasaskan masalah dalam talian kursus lukisan kejuruteraan. PhD thesis, Universiti Sains Malaysia.

Abu Bakar, Amnani (2015) Intergrated leachate treatment by sequencing batch reactor (SBR) and micro-zeolite (MZ). Masters thesis, Universiti Tun Hussien Onn Malaysia.

Anuar, Nurasiah Mira (2015) The study on factors affecting the survival of eschehchu coli in dredged marine soils. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Azhar, Amira (2015) A study on solidification of dredged marine soils using cement and bottom ash. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Adnan, 'Ainul Amra (2015) Noise barrier designs material for Kuala Lumpur Express Rail Link (ERL) system at residential area. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Aliyu, Mohammed Kabir (2015) Solidification/stabilisation treatment of spiked sembrong river sediments using cement and rice husk ash. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdulhameed, Mohammed (2015) Analytical approach to unidirectional flow of non-newtonian fluids of differential type. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Abubakar, Musa Alkali (2015) Assessment of international students’ experience on attributes of physical facilities provision at UTHM residential colleges. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abd Hamid, Siti Munirah (2015) Behaviour of electrical field intensification due to water droplet on solid dielectric surfaces. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Rahman, Abdul Halim (2015) CFD simulation of vortex-induced vibration of a bluff body structure by ANSYS fluent. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Azizan, Mohd Syukur (2015) Development of differential evolution based power system stabilizer (pss) with hvdc in small signal stability analysis using matlab. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ab Ghafar, Fauzi (2015) Driving cycle for small and medium duty engine: case study of Ipoh. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abd Hadi, Syahrunniza (2015) Experimental study of the bio-additives in biodiesel fuel on performance and emissions characteristics of diesel engine. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ambar, Radzi (2015) Experimental study on motion control of dual-arm full/semi-autonomous underwater robots. PhD thesis, Kyushu Institute of Technology.

Abdullah, Siti Nabilah Syuhada (2015) Identification of multiple influential observations in Weibull regression. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ali, Siti Hajar Aminah (2015) Incremental learning for large-scale stream data and its application to cybersecurity. PhD thesis, Kobe University.

Ahmad Tajuddin, Ahmad Syukri (2015) Influences of preheat biodiesel fuel on performance and emissions characteristic of diesel engine. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abd Rahim, Mohamad Hafiz (2015) Lightning effects on underground distribution cable using alternative transient program. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad, Zubidah (2015) Mengukur kualiti perkhidmatan pelancongan perubatan menggunaan instrumen MT - servqual. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Abdullah, Abdul Aziz (2015) Pattern recognition for manufacturing process variation using statistical features artificial neural network. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Wahab, Nur Bahiyah (2015) Pembangunan kit rimba berorientasikan Elemen Sekolah Rimba Malaysia bagi peningkatan kompetensi sains Murid Orang Asli. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Ali, Dzulhaidi (2015) Study of behavior of surge arrester under lightning strike. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad Nazri, Azmarini (2015) Study on occupational safety & health associated spray painting activities at furniture industry. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Azizi, Azizun Nusdin (2015) Tool life simulation by finite element method (FEM) in hard machining of AISI D2 harden steel. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Aziz, Mohamad Fuad (2015) The effect of ambient temperature to the performance of internal combustion engine. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ajeel Aljebur, Raheem Kadhim (2015) The effect of various types of building roof materials on the cooling load. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Awang, Mohd Naim (2015) A study of 2-stroke marine diesel engine characteristic based on condition based maintenance. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Alias, Ahmad Arif (2015) Analysis on noise distribution at different monorail station in Kuala Lumpur. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Lateef, Ahmed (2015) Daynamic channel selection for meshed wireless personal area network. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdullah, Qazwan (2015) Design multilayer bandpass filter using hairpin resonator for digital broadcasting. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdulhasan, Raed Abdulkareem (2015) Design of microstrip ultra wide band antenna with two notch filters for wireless communication. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Akhmar Ahmad, Suzilasahibatul (2015) Development of trainee's innovation skill National Dual Training System (NDTS) environment. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Abd Malek, Ahmad Fariqin (2015) Evaluation of granular fertilizer boom sprayer performance via computational simulation. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdullah, Zulaikha (2015) Fabrication of 316l stainless steel (ss316l) foam via powder compaction method. Masters thesis, Universiti Tun Hussein Onn Malaysia.

A. Salih, Qusay (2015) Improving power losses using distributed generation. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abd Rahim, Mohd Hilmi Izwan (2015) Kajian tahap pematuhan garis panduan penggunaan zon penampan oleh pemaju pembinaan: kajian kes Majlis Perbandaran Pasir Gudang. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Adnan, Nur Atikah (2015) Non-darcy mixed convection from a horizontal plate embedded in a nanofluld saturated porous medium in the presence of heat source/sink. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ali, Hayder Talal (2015) Optimal decision making with analytic hierarchy process for screw sustainable manufacture. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Almelian, Mohamad Milood (2015) Optimal design of passive filter to mitigate harmonic in power frequency. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad, Hairilasri (2015) Optimisation of insulator design for improved electric field performance. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmed, Mustafa Sami (2015) Optimization of coded singals based on wavelet neural network. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul, Mohd Rizan (2015) Performance study on the effect of different exhaust length for motorcycle engine. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Hadi Kadim, Ilham (2015) Study the electrical stress withstand properties of heated refined bleached and deodorized palm oil dielectrics. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Alimi, Zainal Abidin (2015) The auto assist bar system for disabled people. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul-Jabbar, Yasir Amer (2015) An implementation of peak to average power ratio reduction for multicarrier system (orthogonal frequency division multiplexing). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdullah, Saif Khalid (2015) Generating UML class diagram from source codes using multi-threading technique. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Rashid, Azrin Hani (2015) Low velocity impact response of laminated textile coir-aramids/epoxy hybrid composites subjected to transverse penetration loading. PhD thesis, Universiti Sains Malaysia.

Ahmad Shah, Shahrizan (2015) Development of back-to-back converter with power transfer control using raspberry pi. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abas, Nor Haslinda (2015) Development of a knowledge-based energy damage model for evaluating industrialised building systems (IBS) occupational health and safety (OHS) risk. PhD thesis, RMIT University.

Ali, Firdaus (2015) Measuring misalignment of valve seats using eddy current inspection method. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdullah, Siti Rahaida (2015) 3 dimensional simulation on drying of clay and alumina layers using computational fluid dynamics (cfd). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abbas Al-Sahlanee, Rayed Awad (2015) 4-bits 0.25 μm CMOS low power flash ADC. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ang , Peniel Soon Ern (2015) Barrier-driver model for enhancement of ICT implementation in IBS production process management in construction industry. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Ahmed, Ahmed Jamal (2015) Data compression algorithm for WSN based on distributed coding for one-dimensional. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ali, Munasar Abdirahman (2015) Design of fractal minkowski diversity antenna for lte and wifi application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdlkarem, Najla. H (2015) Design of graphical user interface for multiuser SAC-OCDMA performance analysis. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahad, Rosnee (2015) Development of brain computer interface (bci) system for integration with functional electrical stimulation (fes) application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmed Yasin, Mukhtar (2015) Development of triple band planar inverted f-antenna (pifa) for gsm 800 mhz, dcs 1800 mhz and bluetooth 2400 mhz. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abu Hassan, Rozi Roslinda (2015) EEG signal classification for wheelchair control application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abu Bakar, Hizal (2015) Fast transient simulation of IEEE recommended surge arrester model on a transmission line using alternative transient program (ATP). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdullah, Ahmad Faisal (2015) Gait pattern detection for amputated prosthetic using fuzzy algorithm. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmed Mustafa, Esam Mohamed (2015) Impact of total quality management practices on innovation in service organizations. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Ab. Majid, Afiqah (2015) Pembangunan alat penilaian amalan lean untuk perusahaan kecil dan sederhana. Masters thesis, Universiti Tun Hussein Onn Malaysia.

A Hamid, lsredza Rahmi (2015) Phishing detection and trackback mechanism. PhD thesis, Deakin University.

Abdul Rahman, Norsharina (2015) Settlement control of simulated ballast layer with geogrid reinforcement. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Asman, Saliza (2015) Adsorption behaviour of molecularly imprinted-beta-cyclodextrin polymers prepared by reversible additionfragmentation chain transfer (RAFT) polymerization for selective recognition of benzylparaben. PhD thesis, University of Malaya.

Anak Emparan, Quin (2015) Bioremediation of biodiesel and diesel contaminated soil by pseudomonas putida. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Haq, Reazul Haq (2015) Characterization and development of polycaprolactone (PCL)/montmorillonite (MMT)/hydroxapaptite (HA) nanocomposites for fused deposition modelling (FDM) process. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Alzoubi, Amera H. M. (2015) Comparative analysis of image search algorithm using average RGB, local color histogram, global color histogram and color moment HSV. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ali Awaleh, Abdisamad (2015) Design and characterization of flat lens antenna using aperture-coupled microstrip patches. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ali, Mahazani (2015) Developing the knowledge-based human resources that support the implementation of the national dual training system (NDTS): evaluation of TVET teacher’s competency at MARA training institutions. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad, Nurul ‘Atiqah (2015) Development of an electromagnetic numerical solver based on the finite difference time domain (fdtd) technique for research and teaching purposes. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abd Ghafar, N. H. (2015) Dynamic behaviour of LVL-concrete composite flooring system. UNSPECIFIED thesis, University of Canterbury, New Zealand.

Abdul Latif, Noradila (2015) Effect of strain rates on tensile properties and fracture toughness determination of extruded Mg-Al-Zn alloys. PhD thesis, Universiti Kebangsaan Malaysia.

Abdullah, Mohd Shahrir (2015) Faktor-faktor yang mempengaruhi pelajar-pelajar Diploma Kejuruteraan Politeknik dalam menceburi bidang keusahawanan. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Khalid, Nur Khalida (2015) Frequency selective surface (FSS) for cellular signals shielding. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdullah, Saif Khalid (2015) Generating UML class diagram from source codes using mulit-threading technique. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Halim, Nor Hayatie (2015) Hubungan antara tahap keselamatan dengan disiplin dan stres kerja dalam kalangan pekerja industri. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Adeyemi , Adegbenga (2015) Lean thinking approach to sustainable improvement for public office buildings from occupants’ perspective. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Abd Aziz, Azizul Rahman and Mohamad, Mahmod Abd Hakim and Ismail, Suhairi and Mohamed Nor, Mohd Hadri (2015) Mesin kentang berputar (spring) elektrik. Other thesis, Universiti Tun Hussein Onn Malaysia.

Abdalkarim Tahir, Fatma (2015) Open ocean underwater wireless optical communication: chlorophyll and depth dependent variation in attenuation. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Latif, Abdul Mutalip (2015) Pembangunan kemahiran penyelesaian masalah berlandaskan projek origami. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abu Bakar, Nabilah (2015) Penerapan domain psikomotor dalam pelaksanaan pengajaran amali di kolej vokasional. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Adon, Mohamad Nazib (2015) Pulse electric field exposure effect on morphological properties of hela cells. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Abd Rahman, Junita (2015) Relationship between decomposition level and induced solidification of peat based on laboratory investigation. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Almukhtar, Isa Ali (2015) Solar water heating system in Libyan buildings. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Arifin, Mohd Zuhair Azuar (2015) Tahap kesedaran teknologi hijau dalam kalangan guru-guru Teknologi Kejuruteraan Zon Utara. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdulmonim, Dhafer Abdulameer (2015) A comparative analysis of web-based GIS applications using usability metrics. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abd Karim, Nur Alkaf (2015) The significant on risk factors for public private partnership (PPP) infrastructure projects in Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

A. Kadhim Fahad, Abu Abdullah (2014) Modeling and control of quartz crystal operated in liquid for bio-sensing application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abbas, Estabraq Khudhair (2014) Pressure loss prediction and control model for water treatment units. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Azahari, Mohamad Azhar (2014) A study on extrusion of multiple material bonding for fused depostion modeling. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ali, Noorwirdawati (2014) Shear strengthening of pre-cracked and non precracked reinforced concrete continuous beams using bidirectional CFRP strips. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Abubakar, Aliyu Alhaji (2014) Factors influencing customer service delivery of electronic banking services in Malaysian banking industry: a structural equation modelling approach. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Abdullah, Abdullah (2014) Improved cuckoo search based neural network learning algorithms for data classification. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad@Mohamad, Md. Fauzi (2014) The impact of total quality management practices with effects from moderators and mediators on business performance. PhD thesis, Universiti Teknologi Malaysia.

Abdullah, Hadi (2014) Intruder localization wireless sensor network radar design with virtual reference tags. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdullah, Nurul Azma (2014) An improved file carver of intertwined jpeg images using X_myKarve. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Abdullah, Mohd Ezree (2014) Performance of warm mix asphalt (WMA) mixture using nanoclay modified asphalt binder. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Ab Sinusi, Abdulgader (2014) The comparative study of canny filter and morphological operator in fingerprint recognition. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdol Rahman, Mohd Nasrull (2014) Development of an ergonomic risk assessment tool for work postures. UNSPECIFIED thesis, Universiti Teknologi Malaysia.

Abdullah, Siti Ashraf (2014) Fabrication of smart glass electrochromic device using RF magnetron sputtering. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Anak Mugan, Jane Daniela (2014) Accident reduction (night riding) in road safety study on small motorcycles by 3 proactive measures. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdulguad, Osama.H. (2014) Aerodynamic comparison and validation of rans, K-ω, standard K-ɛ and urans simulations of flat plate film-cooling. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ab. Hadi, Nik Aznan (2014) Air breakdown under lightning impulse with plane-plane electrode. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Rahman, Afzainizam (2014) Analisis keselesaan termal di bangunan fakulti Universiti Tun Hussein Onn Malaysia (UTHM), Johor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ali, Nurdin (2014) Analysis of corrosion fatigue for commercially pure titanium using nitrogen ion implantation. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Abdullah, Mohd Asrul Affendi (2014) Associated factor of mortality rate amongst patients with aids and hiv-tb co-infections using zero inflated negative binomial method. PhD thesis, Universiti Sains Malaysia.

Abd Majid, Nor Ayuni (2014) Autonomous fire protection robot with notification. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ali Moftah, Abu Baker (2014) Comparative analysis between FPA and Cocomo Techniques for software cost estimation. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmed, Zamzam Hohamed (2014) Comparison of data hiding using LSB and DCT for image. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Algarai, Elhadi Elfitory (2014) Comparison on correctness, time taken and memory used in web applications using unit and integration testing. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad Mazlan, Nor Adillah (2014) Design improvements of 12 slot-14 pole hybrid excitation flux switching motor with 1.0kg permanent magnet for hybrid electric vehicles. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdull Patas, Nor Hasnati (2014) Design study of outer rotor field excitation flux switching motor for electric vehicles. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdullah, Rohafiza (2014) Design zero-voltage switching DC-DC buck converter. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad Rebudi, Muhammad Faddil (2014) Development of 3-phase inverter with PID voltage control. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdullah, Abdul Hadi (2014) Development of P-resonant voltage control for DC motor using Arduino. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ab Ghani, Mohd Khairul Akli (2014) Development of PID current control for DC motor using ARDUINO. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmed Awol, Khalid (2014) Development of compact rectangular microstrip patch antenna for WIMAX, fixed service satellite and microwave C-band applications. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Mutahar, Lidyanur (2014) Development of repetitive current control for lead acid battery using Arduino. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmed Khudhur, Abdulrahman (2014) Diacritics of Arabic natural language processing and its quality assessment. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Alzalet, Abdusalam Rajb (2014) Dynamic load forecasting for commercial power network. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmed, Bareq Kawwam (2014) Dynamic spectrum access utilizing software defined radio (SDR). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdullah@Abdul Rahman, Suhaimi (2014) Effect of field utilization factor on air breakdown level under impulse lightning in point-sphere electrode system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abd. Rahman, Diyya Hidayah (2014) FPGA-based digital controller for DC-DC converter. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abu Bakar, Mohd Ridhwan (2014) Fuselage aerodynamics analysis through semi empirical method and computational aerodynamics. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ab Muttalib, Siti Aida (2014) Gaya kepimpinan terhadap pemilihan strategi pengajaran dan pembelajaran. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Alswed, Sager K (2014) Improved droop control for parallel inverter system with load. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad, Siti Hasziani (2014) Integration of Program Evaluation and Review Technique (PERT), Gantt Chart and Genetic Algortihm. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Anak John, Gary (2014) Investigate welding parameter optimization for weld bead surface quality using MIG technology. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Amiruddin, Mohd Hasril (2014) Keberkesanan modul asas keusahawanan bercirikan strategi pembelajaran masteri terhadap pelajar orang asli. PhD thesis, Universiti Kebangsaan Malaysia.

Ahmad , Ahmad Fauzi (2014) Kepimpinan instruksional dalam peningkatan pengajaran dan pembelajaran yang berkesan dalam kalangan pensyarah. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abu Hassan , Roslan (2014) Kompetensi guru bukan opsyen yang mengajar kemahiran teknikal di Kolej Vokasional Negeri Pahang. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Atailah, Mohd Nizam (2014) Lightning protection of quadruple circuit 275/132kV transmission line. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Asad, Muhammad Mujtaba (2014) Matlab based modeling and simulink package for dc-dc boost convertor to enhance learning process of power electronics. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Wahab, Siti Nur Wahidah (2014) Motor control system development using microcontroller based on PID controller. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Talib, Yuraimy Yakimin (2014) Optimization of Pedot: PSS thin film for organic solar cell application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abbas, Abbas Allawi (2014) Optimization of parameters of laser non-linear inclined cutting on stainless steel metal. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Razzaq, Abdul Rasid and Mustafa, Mohamad Zaid and Ab Hadi, Mohd Yusop and Madar, Ahmad Rizal and Abd Rahman, Azmanirah and Yaakob@Mohamed, Maziana and Ibrahim Mukhtar, Marina and Roddin, Rohayu and Ahad, Rosnee (2014) Pembangunan kerangka keupayaan di peringkat komuniti ke arah kelestarian pelancongan berasaskan komuniti (community based tourisme) di Malaysia. Other thesis, Universiti Tun Hussein Onn Malaysia.

Ab. Manap, Siti Salwa (2014) Pengajaran guru opsyen dan bukan opsyen kemahiran hidup bersepadu sekolah rendah di Batu Pahat. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad, Ahnaish Muftah (2014) Perception of managerial staff and workers on labour motivation and timing of operation factors in agriculture productivity in Libya. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Anual, Siti Nurhafizah (2014) Persepsi pelajar terhadap perbezaan kemudahan prasarana dalam membantu pembudayaan sains dan teknologi pelajar di Kolej Vokasional Zon Selatan. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdullah, Zaid Qays (2014) Quality assessment on medical image denoising algorithm: diffusion and wavelet transform filters. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Anthony, Roystone (2014) Reliability analysis of distribution network. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Asmayou, Ali.H. (2014) Simulation of palm oil and methanol mixing in stirred tank by implement a normal and fractal baffles. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abd Karim, Nurliana (2014) Simulation of speed control brushless dc motor using gaussian fuzzy logic controller. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdulganiyyi, Nuraini (2014) Specification of vertical semantic consistency rules of UML class diagram refinement using logical approach. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad Shuhaimy, Nur Hanani (2014) Study on non-linear grading material as stress control on polymeric outdoor insulator. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdullah, Fauzi (2014) Tahap kecekapan pensyarah teknologi automotif dalam melaksanakan Kurikulum Standard Kolej Vokasional di Negeri Pahang. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Affendi, Fatimah (2014) Tahap kepuasan kerja dan komitmen organisasi dalam kalangan guru kolej vokasional: pendekatan structural equation model. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abu Bakar, Khairul Anwar (2014) Tahap kesediaan guru pelatih Institut Pendidikan Guru dalam latihan mengajar. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Apat, Julius (2014) Thermal comfort study on terraced house overseeing the effect on rainwater harvesting system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Aziz, Norhaslina (2014) Titanium dioxide (tio2) sol gel coating on 316l stainless steel. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ab Aziz, Aizuriza (2014) Topsis method for load shedding scheme in Johore system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abu Bakar, Faridah (2014) Towards new generation of sustainable catalysts: study of shape and size controlled TiO2 nanoparticles in photocatalytic degradation of industrial dye. PhD thesis, University of Canterbury.

Abdul Latif, Nadiyatul Akmar (2014) UWB antenna using indium tin oxide (ITO). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ab Latif, Najibah (2014) Vibration damping characteristic and sound absorption of bio-polymer from waste cooking oil. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Alakari, Salim Tahir (2014) A comparative analysis of data redundancy and execution time between relational and object oriented schema table. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ali Alamari, Abduladhim Mohamad (2014) A comparative study of watermarking techniques in spatial and frequency domains. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Rahim, Mohd Zain (2014) A concept for wildlife tracking using ultra high frequency (UHF) radio. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ali, Ashikin (2014) An improved multilayer perceptron based on wavelet approach for physical time series prediction. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdullah Alhamzi, Belal Mohammed (2014) A study of energy scavenging strategy in a tapping tree power. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Azalan, Azril (2013) Penentuan ciri-ciri akustik bilik dengan kaedah rumus sabine secara simulasi. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad, Mohd Hafiez (2013) A study of energy efficiency building lighting system design. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdurrahim, Mohamed Emhemed (2013) Analysis and evaluation of uncertainty for conducted and radiated emissions tests. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ayob , Mohammad Afif (2013) Dynamic leveling control of a wireless self-balancing rov using fuzzy logic controller. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abd Rasid, Nor Hafifah (2013) Halangan personaliti dalam e-pembelajaran di politeknik : satu kajian kes kualitatif. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Arifin, Nor Amanina Izyan (2013) Pelaksanaan Outcomes Based Education (OBE) dalam kalangan pensyarah di Fakulti Pendidikan Teknikal dan Vokasional. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Malik, Norfazila (2013) Penerapan ciri-ciri guru berkesan dalam proses pengajaran dan pembelajaran semasa latihan mengajar dalam kalangan pelajar sarjana UTHM. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Assin, Mizan Kamalina (2013) Amalan penggunaan modul pengajaran berasaskan Modul Multimedia Interaktif (MMI) dalam Pendidikan Teknik dan Vokasional (PTV). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Alfan, Norman Hafizi (2013) Analysis of characteristic heat pipe as an efficient cooling heat transfer device. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abd. Rahman, Rais Rabani (2013) Analysis of non uniform surface current distribution on thick and thin wire antenna. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Aman, Fazlina (2013) Beberapa masalah aliran lapisan sempadan olakan dengan kesan gelinciran dan tanpa gelinciran pada permukaan. PhD thesis, Fakulti Sains dan Teknologi.

Ahmad, Abdull Zubi (2013) Characterization of the equatorial F2-region plasma drift using doppler interferometry at Parit Raja. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Adebayo, Christie Oluseyi (2013) Comfort factors in low cost houses: case study at Batu Pahat, Johor Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Arhami, Arhami (2013) Design and analysis of an unmanned small-scaleair-land-water vehicle. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Rahim, Suraya (2013) Design and development of groove micromixer for laminar blood-reagent mixing. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ab. Malek, Siti Nur Hidayah (2013) Design and development of wireless stethoscope with data logging functions. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Alashqer , Aws Zuheer Yonis (2013) Design and implementation of mimo-long term evolution-advanced to support larger bandwidth. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Abu Bakar, Mohd Khairul Fadzly (2013) Design optimization and analysis on flexible manufacturing system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Jamil, Muhamad Faizal (2013) Design optimization of ANN-based pattern recognizer for multivariate quality control. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abas, Mohd Firdaus (2013) Determination of airflow characteristics for a set of stabilizer and elevator using simulation software. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdullah, Rasyidi (2013) Development of DC-DC converter for DC motor using neural network controller. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdull Kadir, Junaini (2013) Development of a boost convertor for photovoltaic system MPPT using fuzzy logic control. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Samad, Abdul Aziz and Jayaprakash, J. (2013) Development of a compatability model for the shear strengthening of reinforced concrete continuous beams using externally bonded bi-directional CFRP strips. Other thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad Jamil, Addzrull Hi-Fi Syam (2013) Development of controller based on fuzzy and PID for mecanum wheel robot. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abd Aziz, Shamsul Anuar (2013) Development of water pressure and distribution monitoring system using PLC and Scada. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ali Saad, Ahmad Mabrook (2013) Dual-band microstrip loop antenna for wireless application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abd Rahim, Rahimah (2013) Effect of physical and mechanical properties of PU biopolymer membranes upon use of different fabrication techniques. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdulslam, Salahaldeen Salem (2013) Effect of temperature and curing time on the fabrication of polysiloxane fzlled silica synthetic via casting and compression moulding methods. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Kadir, Zulida (2013) Enhancing students’ problem solving skills using problem- based learning as an instructional communication approach. PhD thesis, Universiti Putra Malaysia.

Abdullah, Mohammad Kamil (2013) Experimental and numerical investigations on aero-thermal interaction of cooling air ejected from multiple cooling holes. PhD thesis, lwate University.

Ahmad, Abdul Muqsith (2013) Faktor yang mempengaruhi perbezaan pencapaian akademik pelajar lepasan diploma politeknik dan matrikulasi terhadap subjek kejuruteraan. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Adeshina, Adekunle Micheal (2013) Fast parallel volume visualization on CUDA technology. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Abtholuddin , Fadhilah (2013) Hubungan antara efikasi kendiri dan kemahiran belajar dalam kalangan pelajar kejuruteraan. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Anwar, Nurul Farahanaa (2013) Hubungan gaya pembelajaran dengan pencapaian akademik pelajar aliran vokasional. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Alomary, Mayada Faris Ghanim (2013) Implementation of multi carrier-code division multiple access-frequency division multiple access with beyond 4G specifications. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Adrian Bee Tiong , Soon (2013) Intelligent road recognition system for autonomous vehicle. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Hamid, Faizul Ezmat and Wan Yusoff, Wan Zahari (2013) Investigation on different composition of powder metallurgy electrode (Cu-W) in high performance EDM (HPEDM) on AISI D2 hardened steel. Other thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad, Haslina (2013) Kecerdasan emosi dalam kalangan guru sekolah menengah teknik kementerian pendidikan Malaysia berdasarkan model dulewicz dan higg’s. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ab Halim , Fazlinda (2013) Kemahiran kebolehgajian, estim kendiri dan efikasi kendiri pelajar teknikal dan vokasional yang bermasalah pendengaran di Politeknik dan Kolej Komuniti, Malaysia. PhD thesis, Universiti Putra Malaysia.

Ali, Azita (2013) Kerangka modul Bahasa C menggunakan pendekatan model integrasi pembelajaran berasaskan masalah dan pendidikan berteraskan kompetensi. PhD thesis, Universiti Teknologi Malaysia.

Abdul Hamid, Nor Aziati (2013) Kesan faktor klien, pembekal dan sistem memori transaktif (TMS) terhadap pemindahan pengetahuan dalam penyumberan luar teknologi maklumat e-kerajaan: kajian kes agensi awam Malaysia. PhD thesis, Universiti Kebangsaan Malaysia.

Ab Razak, Siti Khadijah (2013) Kesediaan bakal guru dpli terhadap mata pelajaran reka cipta untuk mengajar di sekolah menengah: kajian di UTHM. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Aziz, Siti Mardziah (2013) Kesediaan guru sekolah menengah agama terhadap penggunaan teknologi maklumat dan Komunikasi (ICT) dalam pengajaran dan pembelajaran. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Arifin, Afifah (2013) Kesediaan masyarakat dalam pembangunan program homestay. Masters thesis, Universiti Tun Hussein Onn Malaysia.

A. Manaf, Normala (2013) Keserasian personaliti pelajar dengan kerjaya agen pengembangan. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abd Rahman, Hamimah (2013) Komposit nano La0.6 Sr0.4 Co0.2 Fe0.8O3-8−SDC karbonat sebagai katod bagi sel fuel oksida pepejal bersuhu rendah. PhD thesis, Universiti Kebangsaan Malaysia.

Ahmad, Norhidayah (2013) Linear Quadratic Gaussian (LQG) controller for inverted pendulum. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Alias, Nor Akmal (2013) Linear quadratic regulator (LQR) controller design for inverted pendulum. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Rahman, Mohammad Ashraf (2013) Model kejayaan utama amalan terbaik pengurusan penyenggaraan bangunan warisan di Malaysia. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Abdullah, Mohamad Syah Rizal (2013) Neural network controller design for position control system improvement. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abd Rashid, Wan Norhisyam (2013) Optimal load shedding for microgrids with limited DGs (application in Perwaja Steel Sdn Bhd). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abd Aziz, Aizat (2013) PV boost converter conditioning using neural network. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad, Siti Maisyarah (2013) Pembangunan dan kesan koswer animasi grafik dalam kalangan pelajar teknikal yang berbeza kecerdasan visual-ruang. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Adul Wahab, Mohd Hafeez Al-Amin (2013) Penerapan kemahiran keusahawanan dalam kalangan pelajar bidang kejuruteraan mekanikal di UTHM. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Adnan, Nur Azhani (2013) Pengaruh kecerdasan emosi terhadap kesediaan pelajar Sarjana Pendidikan Teknik dan Vokasional bagi menceburi Profesion Perguruan. Masters thesis, Universiti Tun Hussein Onn Malaysia.

A.Rahim, Norliza (2013) Penggunaan mobile learning (m-learning) untuk tujuan pembelajaran dalam kalangan pelajar kejuruteraan UTHM. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Amir Razlan Shapawi, Mohd Ezhar (2013) Penggunaan model servqual bagi mengukur perkhidmatan pendidikan tinggi di UTHM. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad Taib, Jamilullail (2013) Pengoptimuman pra-olahan air sisa kilang kelapa sawit (POME) menggunakan kaedah elektro-penggumpalan. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Adnan, Suraya Hani (2013) Performance of recycled aggregate concrete containing palm oil fuel ash. Other thesis, Universiti Tun Hussein Onn Malaysia.

Ardi, Mohd Aidil (2013) Power factor improvement in power system with the integration of renewable energy. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ab Latif, Mohd Noor Hisyam (2013) Production management and improvement initiatives: case studies of two Malaysian manufacturing companies. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Anak Selat, Mark (2013) Prototype modeling and mathematical approach for the evaluation and measurement of a parabolic trough reflector. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Awang Besar , Julkifli (2013) Quadrotor stability using PID. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Atan, Farraniza (2013) Recycling kinetic energy from speed bump to generate electricity. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ali, Nur Illyana (2013) Simulation for position control of DC motor using fuzzy logic controller. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Azizan, Abdul Rahman (2013) Simulation of dynamic load effect on power system frequency. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Alir, Afifah (2013) Simulation of speed tracking for brushless DC motor using fuzzy logic controller. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Al. Mabrouk Khalifa, Hamza Masaud (2013) Structural behaviour of precast concrete sandwich panel using recycled aggregate concrete under transverse load. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad Bakri, Hafizah (2013) Tahap kebimbangan pelajar wanita bidang kejuruteraan terhadap peluang kerjaya. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abd Halim, Hasmizar (2013) Three phase inverter development using common mode voltage pulse width modulation (PWM) method. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abu Bakar , Mohd Yusoff (2013) The development of a curriculum framework for the national dual training system (NDTS) in Malaysia. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Abu Bakar, Siti Khatijah (2013) An evaluation of passive cooling strategies on indoor thermal performance of an office space. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ali Elrataimi, Ali Khalifa (2013) The path performance analysis of missile. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abd Rahman , Malek Faizal (2013) A study on the concentration and dispersion of Pm10 in UTHM by using simple modelling and meteorological factors. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Azmi, Mohd Azham (2012) Fabrication and characterisation of sandwich composites of glass fiber skin and polyurethane foam reinforced coconut coir fiber core. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdullah , Nur Munirah (2012) Characterization and treatment of titanium dioxide, TiO2 via ultrasonic process with melastoma malabathricum as sustainable sensitizer for photovoltaic solar cell. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdullah, Zailani (2012) A hybrid model for discovering significant patterns in data mining. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Arshad, Noor Syazana (2012) Determine and analyze the magnetic field magnitude over the Universiti Tun Hussein Onn area using magnetometer. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abd Khalid, Muhammad Syauqat (2012) Development of position control based on continuously variable transmission (CVT). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Akhiak, Mohd Azri (2012) Development of rotary crane system controller using fuzzy logic controller: membership function study. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdull Sukor, Abdul Syafiq (2012) Speaker identification system using MFCC procedure and noise reduction method. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Azizan, Ashraf Zulfa (2012) Structural equation modelling and system dynamic in the detection of power quality events. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ab.Hadi, Mohd Yusop and Mohamad, Baharom and Esa, Ahmad and Madar, Ahmad Rizal and Roddin, Rohayu and Mustafa, Mohamad Zaid and Abdul Razzaq, Abdul Rasid and Ab Rahman, Azmanirah (2012) Analisis keperluan hidup: strategi untuk membangunkan kerangka kediaman hidup warga emas. Other thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad, Ida Laila (2012) Comparison of multimodal pre-processing QRS detection in cardiac signal processing. Other thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Rahim , Muhd Halalluddin (2012) Design and simulation of three phase rectifier with power factor correction. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abuazoum, Mohamed Saleh (2012) Efficient analysis of medical image de-noising for MRI and ultrasound images. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad Tajudin, Saiful Azhar (2012) Electrokinetic stabilisation of soft clay. PhD thesis, University of Birmingham.

Abd Rahman, Norashidah (2012) Fatigue behaviour and reliability of extended hollobolt to concrete filled hollow section. PhD thesis, University of Nottingham.

Ahmad Aliyu, Aliyu (2012) Impact of intangible location attributes on residential property value in Nigeria. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad, Mohd Khairul (2012) Improvement in performances of dye-sensitized solar cell based on nanostructured rutile-phased Ti02. PhD thesis, Shizuoka University.

Abd Rahman, Rahisham (2012) Investigations of ZnO microvaristor for stress control on polymeric outdoor insulators. UNSPECIFIED thesis, Cardiff University.

Ahmad, Madya Herawati (2012) Isu-isu penguatkuasaan terhadap penilaian kesan ke atas alam sekeliling (EIA) bagi projek perumahan di kawasan lereng bukit, kajian kes: Negeri Selangor Darul Ehsan. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Amin, Fatimatuzzahro (2012) Kerjasama Institusi Pendidikan–Industri di Politeknik Merlimau. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad, Sufizar (2012) Kesan parameter pensinteran terhadap sifat mekanikal dan fizikal aloi titanium berbusa menggunakan Kaedah Taguchi. Other thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad, Nur Darina (2012) Modeling thermal model of a disk coil with directed oil flow using matlab software. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Hamid, Rawiyah (2012) Pembangunan kemahiran kerja bepasukan menerusi kokurikulum sukan bola sepak dalam kalangan pelajar UTHM. Masters thesis, Universiti Tun Hussein Onn Malaysia.

A. Jalil, Noor Azyani (2012) Pembangunan kemahiran menyelesaikan masalah menerusi aktiviti kokurikulum khidmat masyarakat dalam kalangan pelajar UTHM. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Majid, Nurin (2012) Pembinaan kesedaran disiplin pelajar melalui pembelajaran PAFA. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abd.Ghani, Aisha (2012) Penggunaan sistem e-pembelajaran author dalam pengajaran dan pembelajaran di UTHM. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Azudin, Syafawati (2012) Perlaksanaan pengajaran dan pembelajaran Pendidikan Khas (masalah pendengaran) bagi program kejuruteraan dan hospitaliti di Politeknik. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Amaludin, Supardi (2012) Persepsi pengajar terhadap perlaksanaan amalan 5S di Kolej Kemahiran Tinggi MARA. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Azhari , Azliyana (2012) Polycyclic aromatic hydrocarbons (PAHs) in air and vegetation: case study at three selected toll stations along north south expressway in Johor, Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Amirnordin, Shahrin Hisham and Abd Rahman, Hamimah and Ainuddin @ Nordin, Ainun Rahmahwati and Alimin, Ahmad Jais and Mohd Ali, Mas Fawzi and Rahmat, Norwahdah and Triwahyono, Sugeng (2012) Porous ceramic/zeolite in engine exhaust treatment. Other thesis, Universiti Tun Hussein Onn Malaysia.

Anak Rufus , Shirley (2012) Power quality events analysis using wavelet transform. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Agustian , Egi (2012) Production of biodiesel from waste cooking oil using ultrasonic tubular reactor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Arbaiy, Nureize (2012) Satisficing-based formulation of fuzzy random multi-criteria programming models in production applications. PhD thesis, Waseda University.

Abdullah, Md Akbal (2012) Sejarah pentadbiran dan pembangunan tanah di negeri Johor dari 1900 hingga 1970. PhD thesis, Universiti Kebangsaan Malaysia.

Ajer, Mohd Razali (2012) Studies of epoxy powder coated galvanized steel substrate via electrostatic powder coating system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdullah, Noorsaliza (2012) VHF adaptive antenna using a rear defogger. PhD thesis, Shizuoka University.

Abdullah, Noor Farahdila (2012) Velocity profile compliance for a wheeled mobile robot. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmed Hendi Gareh , Saleh Ali (2012) Voltage stability assessment for distributed generation in islanded microgrid system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdullah, Muhammad A’imullah (2012) A comparative study of “profile-cut” and “clamped-end” for material handling equipment. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abd Hadi, Faezah (2012) The development of solar irradiation levelling system using colour contour approach. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Hamid, Norhamreeza (2012) The effect of adaptive parameters on the performance of back propagation. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Atomi, Walid Hasen (2012) The effect of data preprocessing on the performance of artificial neural networks techniques for classification problems. Masters thesis, University Tun Hussein Onn Malaysia.

Aziz, Muhamad Fikri (2012) The experimental study of partial discharge of Malaysian based palm oil. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdullah Bamatraf, Abdullah Omar (2012) An improved digital watermarking algorithm using combination of least significant bit (LSB) and inverse bit. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad, Kamilah (2012) The use of management accounting practices in Malaysian SMEs. PhD thesis, University of Exeter.

Ahmad Bakhtiar, Nur Suraya Anis (2011) Preliminary fabrication of biodegradable polymer membranes from renewable resources. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad , Mohd Khairul Ikhwan (2011) Multifingered robot hand robot operates using teleoperation. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdullah, Sabirin (2011) Observations of f-region critical frequency variation over Batu Pahat, Malaysia, during low solar activity. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Rahim , Mohd Salleh (2011) Bottleneck-based heuristic for three machine flow shop scheduling. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Alnatit, Nabil Mohamed Emhdab (2011) Computational study on shear strengthening of RC continuous beams using CFRP sheet. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ambar, Radzi (2011) Design and development of monitoring device for arm rehabilitation. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Rahman, Azman (2011) Liquid mixture control system using PLC. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abd.Y.Gandouz, Suliman (2011) Study of vortex trap on low aspect ratio wing with NACA 0015 cross section. Masters thesis, Universiti Tun Hussein Onn Malaysia.

A. Rahman, Khairul Azlan (2011) The development of mobile robot for air pollution data capture (POPOBOT). Masters thesis, University Tun Hussein Onn Malaysia.

Ahmad, Ahmad Nur Aizat (2011) Application of value stream mapping as a method to reduce cycle time to support lean manufacturing system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Al-Rawachy , Ehab Esam Dawood (2011) Design of microstrip patch antenna for IEEE 802.16-2004 applications. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Alakashi, Abobaker Mohammed (2011) Numerical study on heat transfer and fluid flow characteristic of tube bank with integral wake splitters (Effect of wake splitter length). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad Zahari , Nurul Huda (2011) A security payment model for financial payment using MyKad. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Altaher Mohamed , Mohamed Abdalwahab (2011) A comparative study fourth order runge KUTTA-TVD scheme and fluent software case of inlet flow problems. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Adnan, Mohd Shalahuddin (2011) Development and evaluation of indices to assess the ecological health of the Pahang River, Malaysia. PhD thesis, Kyushu University.

Ahmad, Azmi (2011) Effectiveness of learning transfer in national dual training system (NDTS). PhD thesis, Universiti Tun Hussein Onn Malaysia.

Asmuin, Norzelawati (2011) Investigation into novel matched valveactuator atomiser insert design for compressed gas aerosols. PhD thesis, University of Salford.

Agam, Mohd. Arif and Embong, Zaidi and Nur, Hadi and Ibrahim, Mustaffa and Ismail, Lokman Hakim (2011) Investigation of the physical changes of irradiated polystyrene nanospheres exposed to electron beam. Other thesis, Universiti Tun Hussein Onn Malaysia.

Alumni Research Team, Alumni Research Team (2011) Kajian kebolehkerjaan graduan (graduate employability) Universiti Tun Hussein Onn Malaysia. Other thesis, Universiti Tun Hussein Onn Malaysia.

Abu Bakar, Wahidah (2011) Keberkesanan konsep peta minda dalam pembelajaran berasaskan masalah. Masters thesis, Universiti Tun Hussein Onn Malaysia.

A. Altarhuni., Eyman Ab. (2011) Mechanical and physical properties of clay sand foamed concrete. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ali, Mohamed H. (2011) Mixture characteristics of buton rock asphalt. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Adi Siswanto, Waluyo (2011) New design of pure titanium metal on metal total hip replacement with ion implanted wear resistance surface. Other thesis, Universiti Tun Hussein Onn Malaysia.

Ambak, Kamarudin (2011) Pemodelan persamaan struktur dalam intervensi kelakuan penggunaan topi keledar dengan betul. PhD thesis, Universiti Kebangsaan Malaysia.

Abdullah, Mohamad Faiz Liew (2011) Receiver amplifier technology for dynamic sercives quality adaptation in optical wireless. Other thesis, Universiti Tun Hussein Onn Malaysia.

Abdullah, Farrah Salwani (2011) Voltage disturbance identification using fast fourier transform (FFT) and wavelet transform. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Al Aian, Ahmad Eshtiwey (2011) The aerodynamics analysis of type UAV aircraft with pusher engine configuration by use of DATCOM software. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad Zamhari, Kemas and Mohd. Yunus, Khairul Nizam and Hermadi, Madi and Abdullah Adan, Abdisalam (2011) A study on the technical viability of utilizing used lubricating oil as rejuvenating agent in relaimed asphalt pavement. Other thesis, Universiti Tun Hussein Onn Malaysia.

Ahmed Elshayeb , Said Abdo (2010) Multi-sensor fusion for automated guided vehicle positioning. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Adnan, Ronny Nasrun (2010) Penilaian pengurusan fasiliti di sekolah dasar negeri di Jakarta. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad , Afandi (2010) Efficient reconfigurable architectures for 3-D medical image compression. PhD thesis, Brunel University.

Awang, Halizah (2010) Kesan pembelajaran berasaskan masalah terhadap penguasaan kemahiran generik dan pencapaian akademik pelajar di Politeknik Malaysia. PhD thesis, Universiti Sains Malaysia.

Amirnordin, Shahrin Hisham and Wan Salim, Wan Saiful-Islam and Mohideen Batcha, Mohd Faizal and Md Seri, Suzairin and Mohamad, Akmal Nizam and Alimin, Ahmad Jais and Rhagavan, Vijay R. (2010) Optimal flow parameters of louvered fin heat exchangers for automotive and air-conditioning applications. Other thesis, Universiti Tun Hussein Onn Malaysia.

Abu Talib, Zaihasra and Abdul Rahman, Ismail and Chan, Chee-Ming and Omar, Noorliyana and Ismail, Isham (2010) Study of the geosynthetic reinforced stone column supported (GRSCS) embankment constructed on UTHM soft soil. Other thesis, Universiti Tun Hussein Onn Malaysia.

Abdullah, Hasan Zuhidi (2010) Titanium surface modification by oxidation for biomedical application. PhD thesis, University of New South Wales.

Abdol Rahman, Mohd Nasrull (2009) Ergonomics evaluation of workplace at car tire service centre. Masters thesis, Universiti Putra Malaysia.

Adam, Nabilah (2009) Quality of service performances of three mobile ad hoc network protocols. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Amiruddin, Mohd Hasril (2009) Kemudahan, sikap dan kemahiran teknologi maklumat dan komunikasi (TMK) dalam kalangan guru-guru Program Pendidikan Khas Sekolah Menengah Teknik di Malaysia. Masters thesis, Universiti Utara Malaysia.

Amirnordin, Shahrin Hisham (2009) Computational fluid dynamics (CFD) analysis for a catalytic converter design. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Amir, Nor Fairuz Hayati (2009) Hubungan antara gaya pembelajaran terhadap pencapaian akademik pelajar kejuruteraan dalam subjek berkaitan Grafik Kejuruteraan Berkomputer. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Azhar, Aminuddin Afzan (2009) Kemahiran generik pelajar kejuruteraan mekanikal dalam mata pelajaran Amalan Bengkel Kejuruteraan. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Samad, Abdul Aziz and Jayaprakash, J. (2009) Shear transfer mechanism of reinforced concrete push-off specimen using externally bonded fibre reinforced polymer (FRP) composites. Other thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Hamid, Intan Sue Liana (2008) Reynolds number effects in designing a micromixer for biomems application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abd Aziz , Muhammad Khairul Arifin (2008) Current transformer performance in high voltage and low voltage systems. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad, Mohd Fadhli (2008) Amalan pentaksiran pengajaran dan pembelajaran di Kolej Komuniti di negeri Johor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Azroai, Anis Mardhiyah (2008) Kerangka program pendidikan berterusan bagi bidang teknik dan vokasional berorientasikan pembangunan lestari. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Azman, Azreen Harina (2008) Penerapan kemahiran generik dalam pengajaran program pendidikan kejuruteraan di politeknik Kementerian Pengajian Tinggi Malaysia (KPTM). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Ghani , Mohd Rusmi (2008) Three phase induction motor inverter application for motion control. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Aziz , Roziah (2007) Design on switching sequence for control circuit by using Altera Max+Plus II. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abd Rahman , Aini Baizura (2007) Ciri personaliti di kalangan pelajar Sekolah Menengah Teknik berdasarkan Teori Holland. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad, Azman (2007) Latihan industri membuka peluang pekerjaan kepada graduan lepasan politeknik Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Akmad , Seri Nian (2007) Hubungan pelajar yang menjawat jawatan tertinggi dengan pencapaian akademik. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Anwar Din, Rajabunesha (2007) Keberkesanan program simulasi penapis sambutan dedenyut terhingga (FIR) terhadap kefahaman pelajar kejuruteraan elektrik. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abd Aziz , Siti Fauziah (2007) Tahap penggunaan teknologi maklumat sebagai pemudah komunikasi dalam proses pengajaran dan pembelajaran (P&P) dalam kalangan pensyarah politeknik. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Wahab , Hanani (2007) Development of internet-based remote laboratory for PID control experiments. Masters thesis, International Islamic Universities Malaysia.

Abu Bakar , Afarulrazi (2007) Graphical user interface (GUI) for supervisory control of computer intergtated manufacturing (CIM-70A) using SCADA. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdullah, Abd Halid (2007) A study on thermal environment performance in atria in the tropics with special reference to Malaysia. PhD thesis, Heriot-Watt University.

Ab Tahir , Aliff (2007) Kecelaruan personaliti antisosial di kalangan pelajar politeknik : satu kajian awal. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad Sapawi , Arman (2007) Pendidikan teknik dan vokasional di kalangan masyarakat orang asli. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Arshad , Nazni Hani (2007) Penguasaan kemahiran generik di kalangan pelajar dalam memenuhi kehendak industri : IPTA dan IPTS. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abd Aziz , Mimi Suhana (2007) Rekabentuk kerangka piawaian nasional program kejurulatihan guru/pensyarah TVET : perspektif institusi pengajian tinggi di Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ariffin , Rosalinda (2007) Persepsi tenaga pengajar bidang hospitaliti di politeknik terhadap keperluan dan kesan program latihan ke arah pembangunan profesionalisme. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abbas @ Ahmad, Lutfiah Natrah (2007) Kerangka kerja awal jaminan kualiti latihan teknikal berterusan bagi pusat latihan di Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ab Tahir, Aliff (2007) Kecelaruan personaliti antisosial di kalangan pelajar politeknik - satu kajian awal. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad Po'ad, Farhana (2007) Analytical and experimental study of the electric shielding effectiveness of a metallic enclosure for off-centred apertures. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Jamil , Muhammad Mahadi (2007) Application of a novel high resolution widefield surface plasmon microscope in cell engineering, wound healing and development of new binding assays. PhD thesis, University of Bradford.

Abdul Jamil, Muhammad Mahadi (2007) Application of a novel high resolution widefield surface plasmon microscope in cell engineering, wound healing and development of new binding assays. PhD thesis, University of Bradford.

Azlan , Mohd Azwir (2006) Design a CVT lubricant test device. Masters thesis, Universiti Putra Malaysia.

Ab Halim , Fazlinda (2006) Kaedah pengurusan pengetahuan di kalangan pensyarah politeknik. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Ariffin, Noor Farina (2006) Penilaian pengurusan pengetahuan di kalangan pensyarah politeknik. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Ahmad Termida , Nursitihazlin (2006) The fatality index of public transport (express bus) in Malaysia. Masters thesis, Universiti Putra Malaysia.

Agam, Mohd Arif (2006) An investigation of physical processes in nanosphere lithography. PhD thesis, University of Birmingham.

Ahmad, Hilton@Mohd Hilton (2006) Safety evaluation of bakun concrete faced rockfill dam. Masters thesis, Universiti Putra Malaysia.

Ahmad , Md. Zarafi (2006) Overmodulation and field weakening in direct torque control of induction motor drives. Masters thesis, Universiti Teknologi Malaysia.

Abdullah, Noryusliza (2006) Pengagihan kursus ke ipta berdasarkan sistem bantuan keputusan. kajian kes : Universiti teknologi Malaysia dan Kolej Universiti Teknologi Tun Hussein Onn. Masters thesis, Universiti Teknologi Malaysia.

Ahmad , Ida Laila (2006) Development of a PC interfaced blood pressure meter (e-BPMS). Masters thesis, Universiti Teknologi Malaysia.

Adon, Mohamad Nazib (2006) Simulasi suis optik menggunakan teknologi MEMs. Masters thesis, Universiti Teknologi Malaysia.

A. Jalil@Zainuddin, Mohd Hafiz (2005) Application of microwave in wood tomography. Masters thesis, Universiti Teknologi Malaysia.

Ahmad, Nabihah@Nornabihah (2005) FPGA prototyping of universal asynchronous receiver-transmitter (UART) using altera VHDL implementation. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Abdul Kadir, Herdawatie (2005) Modelling and control of a balancing robot using digital state space approach. Masters thesis, Universiti Teknologi Malaysia.

Abdul Hamid, Nor Aziati (2005) The relative importance of trust and usable website design in building e-loyalty intention on internet banking: a case of Maybank2U.com. Masters thesis, Universiti Teknologi MARA.

Abdul Hamid, Noor Azlina (2005) The use of horizontal and inclined bars as shear reinforcement. Masters thesis, Universiti Teknologi Malaysia.

Abdullah, Mohd Ezree (2005) Level of service (LOS) for multilane highway and road accident information system development of Batu Pahat area. Masters thesis, Universiti Teknologi Malaysia.

Abd Rahim, Erween (2005) Performance evaluation of uncoated and coated carbide tools when drilling titanium alloy. Masters thesis, UniversitiTeknologi Malaysia.

A. Hamid , Isredza Rahmi (2005) Comparative study on RFID, hotspot and car plate scanning method : for intelligent parking management system. Masters thesis, Universiti Teknologi MARA.

Abdurahman, Mohamad Niizar (2005) Short term performance evaluation of a rural road embankment with different reinforcement constructed on soft soil pertaining to vertical settlement. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Abdul Wahab, Fauzi (2005) Simulation studies of 30 MHz phase-locked loop coherent receiver. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Abd Rahman, Norashidah (2005) Static strength of tubular DT joints using lusas finite element software. Masters thesis, Universiti Teknologi Malaysia.

Abu Talib, Zaihasra (2005) Compressibilty and Young's modulus of filled joint. Masters thesis, Universiti Teknologi Malaysia.

Abdul Sukor, Nur Sabahiah (2005) Evaluation of laboratory compactive effort on asphaltic concrete mixes. Masters thesis, University Technology of Malaysia.

Abdullah, Noorsaliza (2005) Microstrip sierpinski carpet antenna design. Masters thesis, Universiti Teknologi Malaysia.

Abdullah, Sabirin (2004) Kajian awal variabiliti ionosfera di Parit Raja, Batu Pahat pada bulan September 2004. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Ambak, Kamarudin (2004) Determining the effects of different posted speed limits on highway. Masters thesis, Universiti Putra Maiaysia.

Ahmad, Hamzah (2004) Feasibility study on robot off-line programming and simulation using matlab tools; simmechanics and simulink packages. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Aman, Hannani (2004) Implementing security framework of electronic business application. Masters thesis, Universiti Putra Malaysia.

Awang, Muhammad Khairudin (2004) Prediction of noise radiation on cylinder head. Masters thesis, Universiti Teknologi Malaysia.

Abdul Shukor, Shazmin Aniza (2004) Smart thermal comfort system: a development of the fundamental control algorithm. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Abdullah, Nurul Azma (2004) Job shop scheduling problem (JSSP). Masters thesis, University of East Anglia, 2004.

Abdul Kadir, Aeslina (2004) Landfill leachate treatment performance in subsurface flow constructed wetlands using safety flow system. Masters thesis, Universiti Teknologi Malaysia.

A. Hamid, Rahayu (2004) Bioactivity classification of anti Aids compounds using neural network and support vector machine :a comparison. Masters thesis, Universiti Teknologi Malaysia.

Abdullah, Nor Rul Hasma (2004) Electron beam sterilization. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Ahmad, Muhammad Shukri (2004) Embedded web server. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Abd. Latif, Noor Azliza (2004) Aliran lapisan sempadan olakan bebas terhadap silinder membulat dan mengufuk dengan syarat sempadan isoterma. Masters thesis, Universiti Kebangsaan Malaysia.

Abu Bakar , Bachik (2004) Subjective and objective evaluation of fabric handle characteristics. Masters thesis, University of Leeds.

Arbaiy, Nureize (2004) Pest activity prognosis in rice fields using fuzzy expert system approach. Masters thesis, Universiti Utara Malaysia.

Ali Munir, Handy (2004) Sistem kawalan banjir dengan menggunakan mikropengawal. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Abd Salam, Suhaila Azura (2004) Analisis keperluan pengguna bagi menghasilkan papan cerita untuk perisian pembelajaran amali: ujian ayakan bagi mata pelajaran Kejuruteraan Jalan raya. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Abdullah, Haryanti (2004) Kreativiti pengajaran di kalangan guru-guru teknikal:satu kajian kes di Sekolah Menengah Teknik Kluang. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Abdullah, Azman (2004) Pembangunan laman web prosedur amalan keselamatan bengkel kayu bagi membantu proses pembelajaran di KUITTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Abdul Shukor, Norhidayah (2004) Pembangunan modul pembelajaran AutocCAD dan kajian penerimaan pelajar: satu kajian kes di Politeknik Kota Bharu. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

A. Rahman , Khairunnisa (2004) Amalan keselamatan dalam makmal dan bengkel elektrik di politeknik dan Institut Kemahiran Belia Negara (IKBN) : satu tinjauan. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Abu Hassan, Norzainariah (2004) Kebolehgunaan kit pengajaran dan pembelajaran bagi meningkatkan prestasi pelajar: satu tinjauan di KUITTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Abdul Rashid, Norbizuna (2004) Pembangunan modul pembelajaran terarah kendiri mengenai konsep dan gelagat kos bagi mata pelajaran Perakaunan Kos di Politeknik Sultan Hj. Ahmad Shah, Kuantan. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Abu Bakar, Noor Azma (2004) Penghasilan buku panduan kerja luar ukur Takimetri bagi meningkatkan tahap kefahaman pelajar dalam pembelajaran secara amali. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Ahmad Zaki, Munirah (2004) Penghasilan cd interaktif pengenalan kepada multimedia sebagai abbm: kajian penggunaannya ke atas pelajar sarjana muda teknologi maklumat di Kolej Universiti Teknologi Tun Hussein Onn (KUiTTHO). Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Abu Bakar, Siti Zauyah (2004) Persediaan pelajar Sijil Pengurusan Pelancongan sebelum memasuki dunia pekerjaan dalam industri pelancongan. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Ahmad, Sarawati (2004) Penghasilan transperansi berkonsepkan peta minda mata pelajaran P 420 Undang Undang Syarikat di politeknik. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Abd Rahman, Mohd Faizal (2004) Gaya belajar pelajar tingkatan lima aliran perdagangan di lima buah sekolah menengah teknik : satu kajian. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Abu Bakar , Rohaida (2004) Mengenalpasti istilah kejuruteraan elektrik yang bermasalah. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Awang Adi @ Jumaat , Md Syadiqin (2004) Penghasilan papan pengawal mikro (PPM) dan kesesuaian penggunaannya kepada pelajar Diploma Kejuruteraan Elektronik di Politeknik Ungku Omar Ipoh, Perak. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Abd. Jalil, Md Hidayat (2004) Persepsi terhadap profesyen juruaudit di kalangan pelajar aliran perdagangan sekolah menengah teknik sekitar Negeri Sembilan. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Ahmad, Noor Aliza (2004) Flood analysis of Sg. Galas at Dabong, Kelantan by using the HEC-HMS software. Masters thesis, Universiti Putra Malaysia.

Abdul Wahab, Roswady (2003) Penghasilan dan penilaian modul pembelajaran kendiri AutoCAD 2D isometrik. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Aman, Mohamad Yusri (2003) The effect of material non-linearity on the predicted performance of road pavement. Masters thesis, University Collage of Technology Tun Hussein Onn.

Abdul Rahman, Akmal (2003) Penghasilan dan penilaian CD pembelajaran bagi subjek pneumatik. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Abu Bakar, Muhammad Helmi (2003) Pembangunan dan penilaian sistem 'template' soal selidik berasaskan web (e-templete questionnaire). Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Abdul Halim, Muhammad Nazri (2003) Penghasilan dan penilaian video dokumentari pendidikan dalam bentuk CD-ROM bagi subjek 'aspek gelagat pengguna' untuk tajuk konsumerisme bagi pelajar semester 5 di Politeknik Port Dickson. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Abd Rahman, Rozana (2003) Penghasilan Modul Pembelajaran Kendiri (MPK) berbantukan komputer bagi mata pelajaran perakaunan kewangan di politeknik. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Abdul Halim, Mohd Hafiz (2003) Penghasilan dan penilaian video dokumentari pendidikan (CD-ROM) pembelajaran pengorganisasian di politeknik. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Abdul Ghani, Aznida Wati (2003) Analisis pembangunan kemahiran berfikir di kalangan pelajar pendidikan teknik dan vokasional dalam proses pengajaran dan pembelajaran berbantukan modul pembelajaran kendiri mekatronik. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Ahmad, Afandi (2003) Fabrikasi dan pencirian teknologi 0.13 um nMOS. Masters thesis, Universiti Kebangsaan Malaysia.

Ab. Rahim, Nor Hayati (2003) Keberkesanan penggunaan on-line forum bagi tujuan pengajaran dan pembelajaran untuk subjek teknikal di kalangan pelajar diploma kejuruteraan awam teknologi KUiTTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Abdullah, Nurhidayah Seetha (2003) Kebolehgunaan cd pembelajaran berbantu komputer bagi matapelajaran kejuruteraan bekalan air dan air sisa di Politeknik Sultan Haji Ahmad Shah, Kuantan, Pahang. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Aman, Fazlina (2003) Ketakstabilan gelombang panjang bagi olakan mantap Benard-Marangoni dengan batas bawah bertebat. Masters thesis, Universiti Kebangsaan Malaysia.

Adnan, Nur Hidayah (2003) Performance of Anaerobic Baffled Reactor (ABR) in treating domestic wastewater. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Ahmad, Syahrul Nazar (2003) Persepsi pelajar tentang keberkesanan aktiviti pengajaran dan pembelajaran dalam amali Kejuruteraan Elektrik. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Ahmad, Norsuhaida (2003) A switched-beam antenna for cellular communication. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Abdul Rahman, Muhamad Zaki (2003) Pembangunan bahan bantu pembelajaran berasaskan sistem maklumat berkomputer. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Abdul Kadir, Khairulnizam (2003) Penghasilan dan penilaian video dokumentari pelepasan diri dan rebat cukai untuk kegunaan pengajaran dan pembelajaran bagi subjek pencukaian Malaysia 1 kursus diploma akauntasi di Politeknik Port Dickson. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Abdul Latif, Mohd Hafizi (2003) Penghasilan dan penilaian video dokumentari pendidikan dalam bentuk cd-rom bagi subjek p1701 - pemasaran 1 bertajuk pengenalan kepada pemasaran- satu kajian di Politeknik Port Dickson. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Azali, Rohayu (2003) Indikator guru perdagangan cemerlang dalam pengajaran dan pembelajaran di sekolah menengah teknik. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Adiman, Rohayah (2003) Indikator pelajar cemerlang : satu kajian di Sekolah Menengah Teknik Batu Pahat. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Ahmad @ Mazlan, Nurazlen (2003) Pembangunan dan penilaian bahan pengajaran berbantu komputer bagi mata pelajaran pemasaran 1 : satu tinjauan di Politeknik. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Abdul Rasid, Rasma (2003) Pembinaan laman web kerjaya bagi pelajar diploma ukur tanah di politeknik. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Ab Rahman, Hamidah (2003) Penggunaan pembelajaran berbantukan komputer mata pelajaran Asas Perakaunan (HI 002) bagi pelajar Sijil dan Diploma Hotel dan Katering di politeknik. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Abdullah, Mohd Faizul (2003) Penghasilan dan kesesuaian penggunaan perisian kursus sistem rangkaian komputer. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Abd Karim, Nor Salmawati (2003) Penghasilan modul pembelajaran penstafan bagi mata pelajaran pengurusan perniagaan : satu kajian di Politeknik Port Dickson. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Adam, Azilahwati (2003) Tinjauan terhadap ciri-ciri guru pelatih ideal dalam proses pengajaran di politeknik-politeknik Malaysia. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Abd. Mutalif, Siti Aisah (2003) Mengenal pasti tahap motivasi dan kecenderungan keusahawanan di kalangan pelajar semester akhir Ijazah Sarjana Muda Kejuruteraan Mekanikal:satu tinjauan di KUiTTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Abdul Talib, Nurul Huda (2003) Modul pembelajaran kendiri secara interaktif subjek kerja kayu di kalangan pelajar sekolah menengah teknik dan vokasional. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abd Rahman, Yusnita (2003) Pengetahuan terhadap penyediaan rancangan perniagaan:satu tinjauan di kalangan pelajar-pelajar tahun akhir Sarjana Muda Kejuruteraan KUiTTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Abd. Kadir, Noorhati (2003) Penghasilan modul pembelajaran kendiri (mpk) untuk mata pelajaran kaedah membatik. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad Razali, Nazamuddin (2003) Penghasilan modul pembelajaran lukisan kejuruteraan berbantukan komputer. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Abd. Hamid, Haslinda (2003) Parit Raja sebagai destinasi pelancongan:satu kajian terhadap pengalaman pertama dan maklumat sedia ada pelajar sarjana pendidikan teknik dan vokasional. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Ahmad Zuki, Ros Eliana (2003) Pengetahuan dan minat terhadap kerjaya keusahawanan:satu tinjauan di kalangan pelajar-pelajar bumiputera aliran kemahiran. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn .

Abd Razak, Suzlina@Norhidayat (2003) Pembentukan modul latihan pemikiran kreatif untuk bakal usahawan bagi graduan Kolej Universiti Teknologi Tun Hussein Onn. Masters thesis, Kolej Universiti Teknolgi Tun Hussein Onn.

Ab. Samat, Lena (2003) Development of software tool for production performance analysis. Masters thesis, German-Malaysia Institute.

Alias, Asmalila (2003) Membina dan menilai modul pembelajaran kendiri bagi topik kemasiapan perabot di Kolej Komuniti Segamat. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Awadz@Hussin, Hafidah (2003) Mengenal pasti masalah pemahaman dan hubungannya dengan latar belakang matematik, gaya pembelajaran, motivasi dan minat pelajar terhadap bab pengawalan kos makanan di Sekolah Menengah Teknik (ERT) Rembau : satu kajian kes. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Ahmad Zolkifli @ Uda, Norazwa (2003) Mengenalpasti faktor motivasi dalam mempengaruhi proses pembelajaran kendiri pelajar :|btinjauan di Sekolah Menengah Teknik Persiaran Brash dan Lebuh Catur, Ipoh Perak, kursus perdagangan tingkatan 5. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Ab. Rahim, Dayang Suhaila (2003) Mengenalpasti permasalahan pelajar kursus katering dalam mata pelajaran teknologi katering di sekolah menengah teknik. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

A'alaf, Rasyida (2003) Modul pembelajaran baik pulih komputer secara maya. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Ahmad, Izyani (2003) Pembangunan dan penilaian cd interaktif proses pemodelan hubungan data dalam mata pelajaran sistem pangkalan data (BTI 2083) di KUiTTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Abd. Shukor , Norazrina (2003) Pembangunan dan penilaian modul pengajaran kendiri berasakan web untuk subjek pola pakaian (JURUSAN FESYEN) di Politeknik. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Ab. Karim, Azhani Hasibah (2003) Pemilihan kerjaya dalam seni reka fesyen : satu tinjauan. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Abdul Rahman, Suhada (2003) Pemurnian Manual Prosedur Ujikaji Makmal Kejuruteraan Kayu, Fakulti Kejuruteraan, Kolej Universiti Teknologi Tun Hussein Onn. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Abu , Talib (2003) Penghasilan prosedur arahan keselamatan bengkel kayu bagi pelajar kejuruteraan KUiTTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Abu Hassan, Norhaslin (2003) Tahap penguasaan pengetahuan, kemahiran serta pengalaman semasa latihan industri sebagai persediaan sebelum memasuki dunia pekerjaan dalam sektor pelancongan /|c. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Alias, Mohd Fairuz (2003) A study of a problematic injection product, leading to the re-design and improvement of the product:study on relationship materials, locating gates and types of mould by moldflow analysis. Masters thesis, German-Malaysian Institute.

Ab Aziz, Haslinda (2003) Pembangunan sistem pangkalan data e-inventori makmal : makmal Kejuruteraan Awam dan Makmal Teknologi Kejuruteraan Pembinaan dan Alam Sekitar. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Azis , Haslan (2003) Pembangunan bahan pembelajaran alternatif mata pelajaran baik pulih komputer di kalangan pelajar kursus sijil teknologi komputer, Politeknik Seberang Perai. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Ahmad@Mohamad , Noraihan (2003) Penghasilan modul pengajaran kendiri bagi mata pelajaran teknologi katering. Masters thesis, Kolej Universiti Tun Hussein Onn.

Alfian Yusof, Safiza (2003) Tahap pengetahuan pelajar mengenai bidang pekerjaan dalam industri pelancongan di politeknik. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Abu Samah, Musa (2003) Pembangunan sistem pendaftaran kursus pendidikan berterusan secara online (e-spbb). Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Abdul Rahim, Rohaida (2003) Pembentukan indikator pensyarah cemerlang Jabatan Kejuruteraan Awam politeknik Malaysia. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Abd Razak, Kamal Firdausi (2002) Portal pendidikan teknik dan vokasional: satu analisis di kalangan pelajar Sarjana Teknik dan Vokasional Kolej Universiti Teknologi Tun Hussein Onn. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Abdullah, Mariam (2002) Keberkesanan penggunaan model dalam pengajaran dan pembelajaran Lukisan Geometri dan Binaan Bangunan mempengaruhi prestasi pelajar di sekolah menengah teknik. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Abdul Rahman, Md Baharuddin (2002) Kepentingan pendidikan teknik dan vokasional serta kemahiran generik : kajian ke atas usahawan projek sekitar jajahan Kota Bharu dan Pasir Mas. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Abdul Manan, Munirah (2002) Pembinaan dan pengujian manual siri transparensi. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Abdul Halim, Faizatul Hafilah (2002) Penghasilan dan penilaian modul pengajaran kendiri "prosedur penubuhan syarikat sendirian berhad" dalam usaha melahirkan siswazah usahawan. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Razak, Azizah (2002) Penglibatan pelajar dalam bidang kokurikulum dan hubungannya dengan pencapaian akademik pelajar : satu tinjauan ke atas pelajar diploma dan sarjana muda KUiTTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Ayob, Noni Lela Hayati (2002) Tahap kepuasan bekerja dan motivasi kerja di kalangan pekerja industri pelancongan. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Abd Karim, Norshahanis (2002) Tinjauan keberkesanan dan penerimaan pelajar-pelajar tahun akhir mengenai perkhidmatan dan kaunseling kerjaya di Jabatan Perdagangan Politeknik dalam pemilihan kerja. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Ahmad Zaini, Mohd Shahrir (2002) Konsep keislaman dalam rekabentuk kurikulum pelancongan di sebuah Politeknik Kementerian Pendidikan Malaysia. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Abdul Manah, Mohd Hoirie (2002) Keperluan perkhidmatan e-kaunseling berasaskan laman web di kalangan pelajar Sarjana Pendidikan Teknik dan Vokasional (PTV) di KUiTTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Abdul Rahim, Nor Hawanis (2002) Penghasilan modul pengajaran kendiri (MPK) mata pelajaran teknologi binaan dan bahan II bagi kegunaan pensyarah dan pelajar kursus ukur bahan di Politeknik Sultan Halim Mu'adzam Shah. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Antonisamy, Dorries (2002) Pembinaan dan penilaian Program Rekabentuk Rasuk Keluli (PRRK) sebagai alat kognitif dalam pembelajaran rekabentuk struktur di kalangan pelajar Diploma Kejuruteraan Awam KUiTTHO Dorries Antonisamy. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Ab. Rahman, Fauzan (2002) Tahap kompetensi lulusan Diploma Akauntansi Politeknik :satu kajian persepsi majikan. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Ab Sani, Siti Norlina (2002) Kajian bersesuaian terhadap garis panduan laman web P & P berkesan bagi pensyarah-pensyarah di Jabatan Kejuruteraan Elektrik, Politeknik Johor Bahru. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Abdul Aziz, Azrul Nizam (2002) Keberkesanan program latihan industri di kalangan pelajar jurusan Diploma Akauntansi di Politeknik-Politeknik Kementerian Pendidikan Malaysia. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Abdullah, Abdul Hasnal (2002) Kajian keberkesanan dan kesesuaian program Diploma Akauntansi Politeknik di dalam praktis. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Ab Rahman, Azmanirah (2002) Kajian kesesuaian pembinaan panduan menghasilkan projek bagi pelajar Diploma Kejuruteraan Elektrk KUiTTHO dalam persekitaran latihan berasaskan komputer. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Abu Zakaria, Nik Reduan (2002) Kajian tahap masalah dalam pencarian maklumat : satu tinjauan di kalangan pelajar Sarjana Pendidikan Teknik dan Vokasional dan pembinaan laman web INCAMPNET. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Ahmad, Rosida (2002) Ke arah pembangunan e-modul pengajaran dan pembelajaran: satu tinjauan program latihan perisian blackboards terhadap pensyarah KUiTTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Abdullah, Rohaila (2002) Kefahaman pelajar institusi pengajian tinggi terhadap pemasalahan gangguan seksual : satu tinjauan di kalangan pelajar KUiTTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Abu Bakar, Mohd Fauzi (2002) Kemahiran menilai maklumat web satu tinjauan di kalangan pelajar Diploma Politeknik Ungku Omar. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Ahmad, A.Azman (2002) Merekabentuk dan menilai modul pengajaran dan pembelajaran Mekanik Pepejal 1 (MMPI) bagi kursus Diploma Kejuruteraan Mekanikal. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Abu Bakar, Siti Zakiah (2002) Modul pembelajaran kadar kendiri perisian lembaran elektronik (MS Excel) bagi matapelajaran pengenalan komputer (P104) untuk meningkatkan kemahiran teknologi maklumat di kalangan pelajar diploma perakaunan politeknik. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Ahmad, Azrina (2002) Pembangunan dan penilaian modul pembelajaran kadar kendiri: pembangunan kemahiran dalam penyelidikan. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Ahmad, Adiebah (2002) Pengaplikasian pembelajaran terarah kendiri dalam subjek percukaian. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Abdul Hamid, Muhammad Fairuzzairi (2002) Penghasilan garis panduan pembinaan item ujian buatan guru. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Ahmad , Sariah (2002) Penghasilan manual keselamatan bengkel kimpalan : satu tinjauan di Institut Latihan Perindustrian Muar. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Aziz, Fauziah (2002) Penilaian awal perisian multimedia interaktif bertajuk Kekuatan dan Kestabilan Binaan di salah sebuah sekolah rendah di Parit Raja, Johor. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Ahmad, Mohammad Noh (2002) Teknologi kerangka web (web template) dalam pembinaan laman web pendidikan kelas maya (e-classroom) secara online. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Abas, Hafizah Rina (2002) Tinjauan terhadap perlaksanaan penilaian berterusan dalam meningkatkan prestasi akademik pelajar menurut persepsi pensyarah dan pelajar semester 2, Diploma Kejuruteraan Awam, Politeknik Port Dickson. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Abdul Ghani, Noor Azimah (2001) Hubungan di antara matapelajaran program sarjana Pendidikan (Teknikal) KUiTTHO dan tahap kecekapan mengajar, graduan di Politeknik Shah Alam. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Ahmad, Roslina (2001) Latar belakang pendidikan teknik dan vokasional di kalangan usahawan kecil bumiputera Parit Raja dan keperluannya dalam perniagaan yang diceburi:satu kajian kes. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Abd Rashid, Samsul (2001) Perkaitan antara pengurusan berkesan dari segi kesediaan pengurus makmal, pengendalian peralatan dan keadaan persekitaran dengan peningkatan ciri-ciri keselamatan di makmal. Masters thesis, Kolej Universiti Teknologi Tun Hussein.

Abd Kadir, Helen Lau (2001) Faktor-faktor yang mempengaruhi pelajar wanita dalam memilih bidang kejuruteraan awam, elektrik dan mekanikal sebagai suatu kerjaya masa hadapan. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Abdul Aziz, Utami Hidayah (2001) Persepsi pelajar terhadap kursus pelancongan:satu kajian kes. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Abdul Manap, Khairul Anuar (2001) Persepsi pensyarah kejuruteraan terhadap keberkesanan program pendidikan teknik dan vokasional bagi memenuhi keperluan pasaran buruh : perbandingan di institut awam dan swasta. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Abdullah, Nazli Hulwany (2001) Kajian terhadap minat kerjaya di kalangan pelajar di Sekolah Menengah Teknik Pengkalan Chepa. Masters thesis, Kolej Universiti Teknoiogi Tun Hussein Onn.

Ahmad, Noorul Azliza (2001) Tinjauan tahap pengetahuan dan penggunaan internet bagi tujuan akademik:|bpelajar semester lima Jabatan Perdagangan Politeknik Ungku Omar. Masters thesis, Fakulti Teknologi Kejuruteraan.

Ab. Ghani, Amran (2001) Amalan kaedah nilaian sistem pentauliahan bagi latihan kemahiran lukisan struktur dan kejuruteraan awam tahap satu anjuran MLVK. Masters thesis, Institut Teknologi Tun Hussein Onn.

Ameerudin, Roslina (2001) Faktor-faktor pemilihan pekerja dalam industri perbankan. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Ankus, Tayie (2001) Ke arah memahami budaya pembelajaran pelajar-pelajar bumiputera yang mengikuti kursus kejuruteraan di KUiTTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Abdul Hadi, Zuraini (2001) Kepuasan kerja dan keperluan melanjutkan pelajaran di kalangan pensyarah Jabaran Perdagangan Politeknik Shah Alam : satu kajian kes. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Amir, Rusli (2001) Kesediaan pelajar Sarjana Pendidikan (Teknikal) ke arah pembentukan seorang pendidik yang cemerlang. Masters thesis, Institut Teknologi Tun Hussein Onn.

Anak Embul, Helen Unyan (2001) Kurikulum pengurusan hotel katering : satu analisis terhadap elemen-elemen, kemahiran kerjaya dan sahsiah diri. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Ahmad Azzudin, Ahmad Hasmudin (2001) Membina profil pelajar berisiko : satu kajian kes terhadap pelajar kursus Sarjana Muda Pendidikan Teknik dan Vokasional di Kolej Universiti Teknologi Tun Hussein Onn. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Abdul Rahim, Nur Riana (2001) Penguasaan kemahiran generic hasil dari program pengajian yang diikuti di kalangan pelajar semester akhir jurusan perdagangan di Politeknik Ungku Omar, Ipoh : satu kajian kes. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Awang, Roslan (2001) Perkaitan di antara status sosioekonomi keluarga dengan pencapaian akademik pelajar aliran teknikal. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Ayob, Intan Hazlina (2001) Sumbangan latihan industri terhadap sektor peruncitan. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Abdul Wahab, Norrizah (2001) Tahap kepuasan kerja dan kecenderungan bertukar kerja di kalangan staf bukan akademik : satu kajian kes Kolej Universiti Teknologi Tun Hussein Onn. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Adlan, Fazida (2001) Tinjauan pengaruh latar belakang pendidikan terhadap budaya kerja dan kualiti perkhidmatan pensyarah di politeknik. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Abdul Jalil, Mohd Taufik and Mohd Yusof, Mohd Zulhilmy and Osman, Razmin (2001) Minat dan kebolehan pelajar terhadap bidang pengajian yang diikuti :kajian kes di kalangan pelajar bidang rekabentuk industri di Politeknik Johor Baharu. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Abdul Wahid, Azila and Misrun, Emmawati and Ahmad, Norhafiza (2001) Mengkaji hubungkait antara gaya kepimpinan pensyarah dan prestasi pelajar bagi kursus pengenalan komputer di Politeknik Johor Bahru. Masters thesis, Kolej Universiti teknologi Tun Hussein Onn.

Ahmad, Noor Afzan and Yahya, Noorhayani and Tan, May Ling (2001) Penggunaan jenis-jenis penilaian oleh pensyarah dalam pengajaran dan pembelajaran di Jabatan Kejuruteraan Awam, Politeknik Ungku Omar. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Ali, Kamal and Douni, Rut and Siagian, Irene Tiurma (2001) Perkhidmatan bimbingan dan kaunseling di Kolej Universiti Teknologi Tun Hussein Onn (KUiTTHO) : pelaksanaan dan harapan. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Awang , Aklimima and Abu Bakar, Siti Farizah and Md Isa, Anis Shabirah (2001) Tinjauan ke atas tanggapan pelajar Diploma Kejuruteraan Mekanikal terhadap kes meniru didalam peperiksaan di Kolej Universiti Teknologi Tun Hussein Onn. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

B

Basri, Kasbi (2017) Characterization of soft soil using multi-channel analysis of surface waves (MASW) and electrical resistivity method (ERM). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Bahrim, Fatihah Shafiqah (2017) Cogging torque reduction of 6S-4P spoke-type IPMSM using a new combination of rotor design. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Baba, Habu Mallam (2017) Framework of property rating practice for financing neighbourhood facilities provision in Nigeria. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Buhari, Mamman Hassan (2017) Optimization of low amplitude pulse electric field exposure on colon cancer cell for wound healing application. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Basir, Nor Farhana (2017) Penguasaan kompetensi komunikasi interpersonal pelajar kejuruteraan Politeknik Ibrahim Sultan Johor Bahru. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Bogelil, Mohamed.B.E. (2017) Phytoremediation of Sembrong river waters using Neptunia oleracea and Pistia stratiotes. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Bachok @ Tunderang, Sallehuddin (2016) Development of time delay current controller using raspberry pi for 3 phase active power filter for nonlinear load improvement. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Bunimin, Johar (2016) Model konsep pembangunan profesionalisme tenaga pengajar kolej vokasional Malaysia. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Bohari, Azuwien Aida (2016) Speed tracking of indirect field oriented control induction motor using neural network. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Bahrudin, Ida Aryanie (2016) A comparative study of user acceptance testing between modified waterfall model and extreme programming in small-scale project. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Bonari, Ahmad Khairuddin (2015) Automatic residual current devices. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Baharom, Nor Azurah (2015) Analysis of electrooculography (eog) for controlling wheelchair motion. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Burhan , Mohd Hafiz (2015) Design and fabrication of an orthotic insole by using Kinect® Xbox gaming sensor scanner and 3d printer. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Bakhit Mabrouk, Wafi Adam (2015) Development of mathmetical model for monorail suspension system under different track conditions. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Buhari, Alunawati (2015) Pembangunan kemahiran kerja berpasukan menerusi kokurikulum sukan hoki dalam kalangan pelajar UTHM. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Balachandar, Vibhu Vignesh (2015) Thermal response on nanofluid flow in the presence of magnetic field with variable stream conditions. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Baharuddin, Asiana (2014) Amalan penyeliaan pensyarah pembimbing terhadap pelaksanaan latihan industri di Politeknik Sultan Haji Ahmad Shah Kuantan, Pahang. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Balasundram, Sandrawarman (2014) Antenna gain measurement using image theory. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Berahim, Nawi (2014) Development of PID voltage control for DC motor using arduino. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Bahron, Zakria Ahmed S. (2014) Development of synchronverter control for induction motor connection. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Babaji Sanusi, Shuaibu (2014) Epidemiological and awareness study of tuberculosis in Batu Pahat, Johor, Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Bako, Hadiza Yakubu (2014) Forecasting pelagic fish in Malaysia using ETS State Space Approach. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Bajerai, Qaddafi Abdullah (2014) Fuse blow scheme and its impact on overhead distribution system reliability. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Bakori (Bakri), Siti Halimah (2014) The formal specification for measuring dust concentration using Z language. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Basharie, Siti Mariam and Mohamad Jaat, Md Norrizam and Khalid , Amir and Alimin, Ahmad Jais and Manshoor, Bukhari and Mohd Ali, Mas Fawzi and Salleh, Hamidon and Mohammad, Md Nor Anuar (2014) A new approach in exploration the air entrainment, endothermic and heat recovery process of biodiesel ignition. Other thesis, Universiti Tun Hussein Onn Malaysia.

B.Alhaj, Reyad Mohamed (2013) Analysis of electric field strength propagating underneath the 132 kV overhead power line. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Buja, Andy Anak (2013) Decision making with analytical hierarchy process (AHP) for viable manufacturing of SCRE. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Buyung, Mohd Reduan (2013) Kerangka rekabentuk carta selak rangkaian berintegrasi Teori Gagne Sembilan Peristiwa Pembelajaran. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Bollah , Javadius (2013) Overspeed correction scheme for DC motor using artifical intelligent approach. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Bernard, Albinus (2013) Speed control of separately excited DC motor using artificial intelligent approach. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Bana Handaga, Bana Handaga (2013) A new classification technique based on hybrid fuzzy soft set theory and supervised fuzzy c-means. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Bakri, Razali (2012) Investigation of tool wear and surface finish in turning process using various cutting condttion. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Bong , Siaw Wee (2012) Adaptive differential amplitude pulse-position modulation technique (DAPPM) using fuzzy logic for optical wireless communication channels. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Basri, Hatijah (2012) Development of hybrid antibacterial membrane by incorporating silver particle with 2,4,6-triaminopyrimidine as compatibilizer. PhD thesis, Universiti Teknologi Malaysia.

Basiron, Ismail (2012) Kesan kaedah pengajaran multimedia interaktif dalam pengajaran seni visual. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Bahtiar, Siti Fazreena Idayu (2012) Modeling the knowledge management processes for planning and scheduling of construction projects based on state-of-the-art technology. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Bidin , Mohamed Noor Azman (2012) Voltage tracking of a DC-DC CUK converter using neural network control. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Basil Daniel, David (2012) The impacts of neighbourhood traffic management. PhD thesis, University Of Canterbury.

Baba , Ishak (2011) Kajian mengenai tahap pencapaian pelajar laluan diploma politeknik berbanding pelajar laluan Diploma IPT, Matrikulasi/Asasi dan STPM yang melanjutkan pengajian diperingkat sarjana muda di rangkaian Universiti Teknikal Malaysia (MTUN) bagi Fasa II. Other thesis, Universiti Tun Hussein Onn Malaysia.

Baba , Ishak (2011) Kajian mengenai tahap pencapaian pelajar laluan politeknik berbanding dengan pelajar laluan diploma/ matrikulasi/asasi/STPM yang melanjutkan pengajian di peringkat sarjana muda di Institusi Pengajian Tinggi Awam (IPTA). Other thesis, Universiti Tun Hussein Onn Malaysia.

Badroldin, Nur Azeera (2010) Treatment of palm oil mill effluent (POME) using hybrid up flow anaerobic sludge blanket (HUASB) reactor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Badarulzaman, Nur Azam (2010) Pengaruh adukan dan kepekatan partikel silicon karbida sebagai penguat terhadap kelakuan salutan komposit matriks nikel. PhD thesis, Universiti Sains Malaysia.

Baba , Ishak (2009) Keberkesanan pengajaran dan pembelajaran dan kaitannya terhadap prestasi akademik pelajar UTHM. Other thesis, Universiti Tun Hussein Onn Malaysia.

Bachok , Andi Norasyikin (2008) Numerical modelling in investigation of road failure on Malaysia peat soil. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Basarahim , Bazlina (2008) Kemahiran menvisualisasi ruang dalam kalangan pelajar pendidikan khas (cacat pendengaran) politeknik Kementerian Pengajian Tinggi Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Baba, Ishak (2007) Model sistem pengurusan risiko hingar dalam industri berasaskan kayu di Malaysia. PhD thesis, Universiti Kebangsaan Malaysia.

Baharudin, Elfarizanis (2006) Rekabentuk dan pembangunan rectenna kutub membulat pada 2.4 GHz untuk penghantaran kuasa tanpa wayar. Masters thesis, Universiti Kebangsaan Malaysia.

Basharie , Siti Mariam (2005) Performance modelling of refrigerants in a vapor compression refrigeration cycle. Masters thesis, Universiti Teknologi Malaysia.

Bahari, Azurahani (2004) Kepuasan kerja di kalangan pensyarah : kajian kes perbandingan Politeknik Ungku Omar dan Kolej Cosmopoint. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Baharin, Mohd Norbi (2003) Kebolehgunaan pembelajaran berbantu komputer untuk matapelajaran sistem elektronik 1 di politeknik. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Bariman, Norhafzan (2003) Pelaksanaan pengajaran dan pembelajaran proses tuangan menggunakan media pengajaran berasaskan komputer. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Buhari, Rosnawati (2003) Mechanistic evaluation of asphaltic pavement based on benkelman beam deflection. Masters thesis, Kolej Univesiti Teknologi Tun Hussein Onn.

Basarudin, Zuraini (2003) GIS :sistem maklumat pengurusan makmal di KUiTTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Bagu, Pitus@Vitus (2002) Penghasilan manual ringkas penggunaan alat Total Station sokkia set5f dan perisian Sdr Mapping & Design untuk automasi ukur topografi. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Bujang, Siti Hudzaimah (2001) Penglibatan wanita dalam profesion IT di Malaysia. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

C

Chew, Bee Gek (2017) Pengetahuan dan pengaplikasian kemahiran berfikir aras tinggi dalam kalangan guru teknik dan vokasional. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Crocker, Flora (2017) Prediction of photovoltaic (PV) output via artificial neural network (ANN) based on real climate condition. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Choong, Pui Ying (2017) An exploratory study on human resource outsourcing. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Chan, Boon Loong (2016) Cold compression in direct recycling of aluminium 6061. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Chi Adam, Mohd Khairl Anbia (2016) Design and development of Pineapple Leaf Fiber Machine 1 (PALF M1) for small scale industry. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Chua , King Lee (2016) Electric field emissions of FPGA chip based on gigahertz transverse electromagnetic cell modeling and measurement. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Che Ros, Farrah Syamimi (2016) Trait personaliti graduan wanita di Malaysian technical university (MTU) dalam pemilihan kerjaya. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Chieng, Hock Hung (2016) A genetic simplified swarm algorithm for optimizing n- cities open loop travelling salesman problem. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Chew, Chang Choon (2015) A study of active access-point selection algorithm for wireless mesh network under practical conditions. PhD thesis, Okayama University.

Che Pa, Mohd Nasir (2015) Analisa tegasan bagi paip fungsi bahan bergred dikenakan bebanan haba. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Che Hassan, Farah Hazwani (2015) Analysis of robot localisation performance based on Extended Kalman Filter. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Che Ab Aziz, Mohd Fahmi (2015) Design and optimization of hybrid excitation flux switching machine (Hefsm) 12slot-14pole. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Che Abdul Aziz, Mohd Aswadi (2015) Fatigue strength of woven kenaf fibre reinforced polyester composites. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Che Mat Zin, Roslidawati (2015) Modul pembangunan kemahiran generik berlandaskan origami. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Chua, Qing Shi (2015) Optimal voltage stability assessment based on voltage stability indices and artificial neural network. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Che Hassan, Yuhanis (2015) Pengetahuan, sikap dan kesedaran pensyarah dalam pengamalan penyelidikan di politeknik premier. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Che Him, Norziha (2015) Potential for using climate forecasts in spatio-temporal prediction of dengue fever incidence in Malaysia. PhD thesis, University of Exeter, United Kingdom.

Cuevas, Maricel David (2015) The potential and promotion of entotourism in Gunung Ledang, Johor, Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Che Muhamad Khabali, Mohd Khazani (2014) Investigation of increasing fault gas in excitation transformers. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Che Rusuli, Muhamad Saufi (2014) Linkage between knowledge management practices and library users’ satisfaction at Malaysian University Libraries. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Cholan, Noran Azizan (2014) Multiple wavelengths generation utilizing nonlinear optics of four wave mixing. PhD thesis, Universiti Putra Malaysia.

Choy, Yaan Yee (2014) Nonlinear wave modulation in a fluid-filled thin elastic stenosed artery. PhD thesis, Universiti Teknologi Malaysia.

Che Mok@Adnan, Mohd Dasri (2014) Lightning impulse tests on air-breakdown level in point-plane electrode configuration. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Chew , Yueh Seng (2014) Machining of Inconel 718 (difficult to cut materials) using cryogenic and non-cryogenic cutting tools. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Chia Woon, Liew (2014) Obstacle avoidance robot applying fuzzy control system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Chairol Mohd Feroz, Kairil Fariq (2014) Vehicle tracking and speed estimation for traffic surveillance. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Che Dalim, Che Samihah (2013) Astronomy for kids e-learning system using markerless augmented reality. Masters thesis, Universiti Putra Malaysia.

Che Sham, Izwan (2013) Buck converter switching design using microcontroller. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Che Husin, Mohd Fikri (2013) Design and implementation of FPGA-based DNA sequence alignment accelerator. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Che Mamat , Rufaizal (2013) Engineering properties of Batu Pahat soft clay stabilized with lime, cement and bentonite for subgrade in road construction. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Che Ani, Rashida (2013) Kecerdasan emosi dalam kalangan Pelajar Diploma Pendidikan Lepasan Ijazah (DPLI) Universiti Tun Hussein Onn Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Che Hassan, Norazieeyah (2013) Kerangka kompetensi reka bentuk bahan pembentangan interaktif. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Che Ros, Ziana (2013) Optimal location of capacitor bank for power losses minimization. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Che Ilias , Izyan Mumtaz (2013) Pelaksanaan pengajaran pensyarah tiada kelayakan Ikhtisas Pendidikan. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Chua, Hock Guan (2013) Power dispatch of hybrid photovoltaic-genset system using heuristic bio-inspired approach. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Chin, Ken Leong (2013) Programmable logic controller based variable speed drives for educational trainer. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Che Ku Melor, Che Ku Nor Azie Hailma (2012) Fuzzy controller design for position control. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Chan, Wen Shan and Ghazali, Mohd Imran (2012) Characteristics of developed flexible polyurethane foams reinforced with coconut coir fibres and recycled tyres. Other thesis, Universiti Tun Hussein Onn Malaysia.

Che Mat, Muhariyanti (2012) Pelaksanaan persijilan kemahiran Malaysia melalui kaedah pengiktirafan pencapaian terdahulu terhadap sektor pekerjaan. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Che Juhan Negara, Roslena (2012) Tahap kesediaan pelajar kejuruteraan Politeknik terhadap keselamatan di dalam bengkel. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Che Mohd Husin, Mohd Faizal (2011) Airfoil aerodynamics analysis by using viscous-inviscid direct analysis. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Charles, Udechukwu Chukwuemeka (2011) Power quality analysis and mitigation. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Chee, Kwok Chien (2011) FSI analysis of artery suffering atherosclerosis. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Chuah, Chai Wen (2009) Omega network hash construction. Masters thesis, Universiti Sains Malaysia.

Che Radzi, Muhammad Firdaus (2008) Tahap kematangan e-pembelajaran:satu kajian di Universiti Tun Hussein Onn Malaysia (UTHM). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Che Abd Razak, Nohayati Sa'adah (2008) Gaya pembelajaran pelajar kejuruteraan di Universiti Tun Hussein Onn Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Chulan , Megat Azahari (2007) Design and implementation a single phase bi-directional DC-DC converter. Masters thesis, University of Malaya.

Chew, Chang Choon (2005) Distributed processing of MPEG-2 video encoding on microsoft windows platform. Masters thesis, Kolej Universiti Teknologi Tun Hussein.

Cholan , Noran Azizan (2004) Moving object detection in a sequence of images taken from non-stationary camera. Masters thesis, Universiti Teknologi Malaysia.

Che Musa, Noradilah (2004) Penghasilan dan penilaian modul pembelajaran Mesyuarat Syarikat dan Pelaksanaannya: satu kajian kes di Politeknik Port Dickson. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Chua , King Lee (2004) The investigation on the factors that affect the resistance of drain-to-source in semiconductor packaging. Masters thesis, Universiti Kebangsaan Malaysia.

Che Pa, Mohamad Fauzi (2003) Penghasilan buku panduan keselamatan di Makmal Teknologi Pembinaan (Kerja Kayu) KUiTTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Che Idris, Muhammad Sani (2003) Penggunaan transparensi sebagai alat bantu mengajar oleh pensyarah dalam mata pelajaran P315 pengurusan perniagaan bagi pelajar-pelajar perdagangan di Politeknik Sultan Ahmad Shah. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Chen, Mei Cheng (2002) Investigating the use of the e-mail in the teaching and learning of a technical subject among Politeknik Ungku Omar students. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Chai , Teck Jung (2002) Keselesaan pelajar KUiTTHO terhadap penggunaan bangunan yang telah diubahsuai. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Chong, Fung Yen (2001) Ke arah memahami budaya pembelajaran pelajar-pelajar cina yang mengikuti kursus kejuruteraan di KUiTTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Che Engku Husin, Engku Intan Norazlin (2001) Faktor-faktor yang mempengaruhi prestasi pembelajaran pelajar-pelajar Sarjana Muda Kejuruteraan Elektrik di Kolej Universiti Teknologi Tun Hussein Onn. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Che Ismail, Che Rugayah (2001) Pengurusan kewangan pelajar: satu tinjauan awal kepada keperluan kaunseling kewangan. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

D

Diblawe, Dahir Kheyre (2018) Modeling and simulation of inverter-controlled hybrid photovoltaic-wind connected to the grid generation system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Doraisamy, Sunitha V. (2017) Abandoned project restoration model (APRM) for residential construction projects. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Das, Bhagwan (2017) All optical signal regeneration technique design and real time implementation for different modulation schemes using ultrascale FPGA. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Doman, Noriyani (2017) Implikasi Google Apps dalam pengajaran dan pembelajaran pelajar pesisir UTHM. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Dwee, Chiew Yen (2017) Teacher beliefs and practices in communicative language competence towards the development of an autonomous learning model. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Dagang, Mohd Yusoff (2016) Amalan kreativiti pengajaran guru pendidikan Islam di sekolah-sekolah negeri Johor. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Damin, Zahrul Akmal (2016) Dasar kerajaan dan isu sekuriti makanan di Malaysia: kajian analisis dokumen dan temubual. PhD thesis, Universiti Utara Malaysia.

Dawood, Mohammed Ahmed (2016) Improvement of power quality using unified power quality conditioner. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Diman, Siti Fairuz (2016) Study on the potential applications of the geocomposite cellular mat (GCM) for water quality and wall radiation shielding. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Dawam @ Tawil, Salnuraini (2015) Analisis masa ketibaan dan pelepasan tren bagi sistem transit aliran ringan: kajian kes LRT Laluan Ampang. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Danlami, Shehu Isah (2015) Synthesis and characterization of polysiloxane compound as precursor of silicon dioxide. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Dhaya Nor, Beshar (2015) Comparative analysis of software reusability attributes in web and mobile applications. Masters thesis, Universiti Tun Hussein Onn Malaysia.

D. Pagukuman, B. Norerama (2015) Development of local exhaust ventilation (LEV) system performance test method and guideline for sustainable maintenance. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Dorairaju, Hemarani (2015) Investigation of cutting temperature and cutting force from mist flow pattern in MQL technique. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Daud, Mohd Elias (2014) Step-NC controller for 3-axis CNC milling machine. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Didane, Djamal Hissein (2014) Interior noise reduction approach for monorail system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Dwi Anggono, Agus (2014) Combined method for die compensation in sheet metal forming. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Deraman, Farih (2014) Development of P resonant current control for DC motor by using Arduino. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Dahri, Muhammad Hashim (2014) Dynamic tunability enhancement of reflectarray antenna using non-homogeneous dielectric materials. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Diaw, King Eh Sut (2014) FPGA based maximum power point tracking of photovoltaic system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Dulaidi, Dzulhizzam (2014) Modeling and control of 6 DOF industrial robot using fuzzy logic controller. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Daud, Nur Atiqah (2014) Modeling and control of heat exchanger by using bio-inspired algorithm. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Dzulkfli, Bari'ah (2014) The mediating effect of organisational climate on the relationship between leadership practices and innovative work behaviour. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Daud, Zawawi (2013) Investigation of organic composition of potential plants as alternative fiber in paper making industry. Other thesis, Universiti Tun Hussein Onn Malaysia.

Derani, Mohd Naqib (2012) The effect of cryogenic cutting tools on machining difficult to cut material. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Dahlan, Samsul Haimi (2012) Contribution to the body of revolution finite-difference time domain (BoR-FDTD) method - implementations of hybrid and multi-resolution approaches for fast simulation of electrically large axis-symmetrical antenna structures. PhD thesis, Universite De Rennes.

Daud, Mohd Effendi and Omar, Kamaludin and Musa, Tajul Ariffin (2012) Long-baseline, sub-decimeter kinematic GPS positioning of moving object, with potential application to monitor ocean surface wave. Other thesis, Universiti Tun Hussein Onn Malaysia.

Daud, Mohd Effendi and Omar, Kamaludin and Musa, Tajul Ariffin (2012) Long-baseline, sub-decimeter kinematic GPS positioning of moving object, with potential application to monitor ocean surface wave. Other thesis, Universiti Tun Hussein Onn Malaysia.

Dolah, Nurziatul Adawiyah (2012) Pembangunan kemahiran penyelesaian masalah dalam kelab kaunseling dan kerjaya UTHM. Masters thesis, Universiti Tun Hussein Onn Malaysia.

David , Martin and Mohamed Razali, Muhammad Najib and Graeme, Newell and Eni, Sabariah (2011) Quality valuation report in Malaysia. Other thesis, Universiti Tun Hussein Onn Malaysia.

Dahlan, Samsul Haimi (2005) Compact microwave hairpin line band pass filter using folded quarter-wave resonator. Masters thesis, Universiti Teknologi Malaysia.

Daniyal, Hamdan (2004) Study on interoperability problems among CAD/CAM systems in automotive industry. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Doni Erizal, Salpidin (2003) Pembangunan modul pengajaran dan pembelajaran berkonsepkan multimedia interaktif untuk subjek kejuruteraan jalan raya. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Dionnysius, Saiting Ahip (2003) Penghasilan dan penilaian koswer manual reka bentuk sistem sesalur penyaman udara. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

E

Elkarghali, Farag A. M. (2018) Hybrid fuzzy- proportional integral derivative controller (F-PID-C) for control of speed brushless direct current motor (BLDCM). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Elewe, Adel Muhsin (2017) Hybrid optimization technique for RFID network planning to improve warehouse management efficiency. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Erode Natarajan, Ashwin Kumar (2016) Heat transfer analysis of nanofluids with variable stream conditions using numerical approach – RKF45. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Eh Kan, Chessda Uttraphan (2016) Interconnect tree optimization algorithm in nanometer very large scale integration designs. PhD thesis, Universiti Teknologi Malaysia.

Elmi Gure, Abdirahman (2015) Design rectenna for wireless energy harvesting. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Elmi, Mohamed Ali (2015) Development of Fabry Perot antenna inspired by patch-type frequency selective surface (FSS) for X band communication. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Esa, Ahmad and Selamat, Asri and Daud, Noraishah and Lukman, Syahrul Nizam and Abd Aziz, Zalina@Siti Aishah (2015) Pembangunan Model Integrasi Latihan Pendidikan Vokasional dan Islam untuk kumpulan remaja terlanjur. Other thesis, Universiti Tun Hussein Onn Malaysia.

Elewe, Adel Muhsin (2014) Feasibility study on producing functional parts using molding technology. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Eni, Sabariah (2014) Urban regeneration financing and land value capture in Malaysia. Masters thesis, University of Ulster.

Elmaryami, Abdlmanam S. A. (2014) 1-dimensional transient heat transfer axi-symmetric mathematical modelling to determine lowest hardness point of quenched steel bar. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Ebshish, Abdolkarem Salem (2014) DC-DC boost converter by H-infinity controller. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ekal, Hassan Hamid (2014) Denoising of auditory brainstem response via diffusion and wavelet transform. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Eldagdag , Nabil Musbah (2013) Constant DC output boost converter for solar system sourace model. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Elarosi, Muwfik Faidi Khaire (2013) On the development computer code for determining the root of equation for transient flight analysis. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Eh Tem, Wan Na (2013) Pengaruh iklim organisasi ke atas prestasi kerja guru di kolej vokasional. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Esa, Mohd Faizal (2013) The effect of kenaf fibre as a cushioning material in packaging. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Elfallah, Saleh S Saleh (2012) Analysis of mechanical properties and microstructure of multiple die cavity products produced in vertical and horizontal arrangement by gravity die casting. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Embong, Zaidi and Yarmo, Ambar and Taufiq, Yap Yun Hin and Agam, Mohd. Arif and Chulan, Megat Azahari (2012) Niobium mixed oxides catalyst for environment remediation. Other thesis, Universiti Tun Hussein Onn Malaysia.

Elwanti, Siscka (2012) The impact from the implementation of the new curriculum for technical and vocational school in Indonesia. PhD thesis, Universiti Tun Hussein Onn Malaysia.

El-Shami , Ibtihal Fawzi (2011) Shielding effectiveness of mesh wire for 50hz magnetic field. Masters thesis, Universiti Tun Hussein Onn Malaysia.

El Gayar , Ali I. (2011) Wind induce clearances infringement of overhead power lines. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Esa, Fahmirudin (2009) The transmission curve of a fabry perot system based on plane and spherical mirror separation. Masters thesis, Universiti Teknologi Malaysia.

Esa, Ahmad (2007) Penerapan kemahiran generik menerusi kokurikulum di politeknik bagi memenuhi keperluan industri di Malaysia. Post-Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Edni, Ermizan (2003) Perbandingan gaya pembelajaran kinestatik terhadap pelajar kejuruteraan di Politeknik Kuching: satu tinjauan. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Elias, Sarina (2002) Kemahiran menggunakan peralatan dan perisian dalam menghasilkan produk ukur : satu tinjauan ke atas pelajar diploma ukur tanah di Politeknik Sultan Haji Ahmad Shah, Kuantan, Pahang. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

F

Fayed Mogalli, Ali Hussein (2017) Integration of building information modelling (BIM) with materials management in construction project. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Fouzi, Mohd Anasfarhan (2017) Kajian penilaian tahap kelesuan yang mempengaruhi cara pemanduan bas dalam perbandaran kawasan Lembah Kelang. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Fadzilah, Aimi Hafizah (2017) Pelaksanaan pengajaran dan pembelajaran koperatif berasaskan abad ke-21: satu tinjauan di Sekolah Menengah Kebangsaan Pekan Nenas. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Faisal, Muhammad (2017) Penyebaran keilmuan melalui jaringan ulama Tarekat Naqsabandi di Kepulauan Riau. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Farea Esmail, Bashar Ali (2016) Performance evaluation of DST-based FDMA systems for wireless communications. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Feriyanto, Dafit (2014) Development of nanocrystalline Fe80Cr20 alloy using combination technique of ball milling and ultrasonic treatment for fuel cell interconnector. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Fardi, Halimatun Sa’adiah (2013) Balanced intra-cluster multi-hop routing algorithm based on forwarding restriction angle (B-IMRA) in wireless sensor networks. Masters thesis, Universiti Teknologi MARA.

Firdianto, Ade (2012) Ultrasonic treatment with nickel electroplating combined with oxidation for developing y-Al2O3 washcoat on Fe-Cr-Al substrate. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Fuad, Norfaiza (2007) Detection of head position using chain code algorithm. Masters thesis, Universiti Putra Malaysia.

Faizan Marwah, Omar Mohd (2006) Performance evaluation of FDM water works system for ABS part. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Fathil, Nor Fathimah (2004) Kajian perbandingan dari aspek program di Institut Latihan Perindustrian (ILP) dan Akademi Binaan Malaysia (ABM): satu kajian kes. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Fuad, Noor Faznyzahuda (2003) Pembangunan bahan pengajaran: modul pembelajaran berbantukan komputer bagi mata pelajaran penjana at dan au di Kolej Komuniti Bandar Darulaman, Jitra, Kedah. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Fauzi, Siti Nor (2003) Kajian kesesuaian terhadap pembinaan modul pembelajaran kendiri (mpk) sistem wang dan bank (mswb) di kalangan pelajar semester satu diploma perakaunan di Politeknik Kota Bharu. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Foo, Jyy Wei (2002) Investigating the use of an online classroom in understanding the learning process of KUiTTHO students. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Frey Khan, Rose Sharijan (2002) Pembinaan enjin pencari ODITS (Online Database for Information Technology Student) di Politeknik Ungku Omar. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Fikri, Afandi (2002) Peluang kerjaya industri pelancongan bagi pelajar kursus Diploma Pengurusan Pelancongan politeknik. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

G

Gamal Al-Kaf, Hasan ALi (2018) Predictive model and near infrared spectroscopy in predicting the diesel fuel properties. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Gambo, Abdu (2017) Implication for office environment ergonomic intervention: a study of local government offices in Katsina state of Nigeria. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Garba, Abdurrahman (2017) Modified rice husk and activated carbon filters for the removal of organics and heavy metals in water. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Gani, Paran (2017) Phycoremediation using Botryococcus sp. as nutrients removal in organic wastewaters coupled with hydrocarbon production. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Gamsha, Abdullahi Madaki (2017) A study of flow and heat transfer of nanofluids: between two parallel plates, over a wedge and past a stretching sheet. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Ganasan, Reventheran (2016) Evaluation of innovation lightweight fill in problematic soil. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Gopal Pillay, Khuneswari (2015) Model selection and model averaging in the presence of missing values. PhD thesis, University of Glasgow.

Ghazali, Mohd Hafiz (2015) New design of tuned vibration absorber for wide frequency range application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Goh, Wan Inn (2015) Structural behaviour of precast lightweight foamed concrete sandwich panel (PLFP) with shear truss connectors. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Garba, Mohammed Hamisu (2015) Assessment of traditional procurement system in Nigeria: key challenges and proposed solutions. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Gambo , Muhammad Mustapha (2015) Best value model for public private partnership infrastructure projects in Malaysia. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Gabi, Usman Alhassan (2015) Plankton diversity in temporary water habitat in Upeh Guling, Taman Negara Johor, Endau Rompin, Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ghazali, Suraya (2015) Prediction of indoor environmental parameters for naturally ventilated building using artificial neural network: a reflection of outdoor parameters. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ghazalan, Mohd Shahzuan (2015) Tahap kesediaan peserta program Pembelajaran Sepanjang Hayat (PSH) dalam kecenderungan menceburi keusahawanan di kolej komuniti Negeri Johor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Githeeth, Ali Hussein (2014) Heat transfer enhancement in a rectangular duct by using winglet and nanofluids. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ghani, Nor Aslasiah (2014) Kemahiran employability dan penghargaan kendiri dalam kalangan pelajar kejuruteraan, UTHM. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Goh, Hui Hwang and Kok, Boon Ching and Baharom, Md Nor Ramdon and Ishak, Mohd Taufik and Goh, Kai Chen and Lee, Sian Wei (2014) Structural equation and system dynamic model of islanded wind power grids evaluation. Other thesis, Universiti Tun Hussein Onn Malaysia.

Gorep , Nor Aizila (2013) Induction motor controller using fuzzy logic. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ghazali , Mohammad Shafiq (2013) Penerapan kemahiran employability menerusi kokurikulum bola sepak di kalangan pelajar kejuruteraan UTHM. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Goh , Hui Hwang and Kok , Boon Ching and Pang, Che Fong and Haron, Zainal Alam and Abdul Shukor, Mohd Azlan (2012) Analytic hierarchy approach of load shedding (LS) scheme in an islanded power system. Other thesis, Universiti Tun Hussein Onn Malaysia.

Ghazali, Mohd Imran (2012) Condition monitoring on textile machine gearbox using oil debris analysis. Other thesis, Universiti Tun Hussein Onn Malaysia.

Gambo , Muhammad Mustapha (2011) A study of current design & build procurement approach practice based on the client’s specific expectations in the Malaysian construction industry. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Guterres, Anuciano Domingos Pinto (2008) The structural behaviour of low - rise residential building due to wind and seismic loads. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ghazali, Rozaida (2003) Pemodelan rangkaian Neural Suap Balik bagi meramal harga rumah. Masters thesis, Universiti Teknologi Malaysia.

Ghani, Syuhairah (2003) Kemahiran mengendalikan pakej perakaunan universal business software (UBS) di kalangan pelajar tahun akhir Diploma Akauntansi: satu tinjauan di Politeknik Kota Bahru, Kelantan. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Goel, Petrus Julini (2003) Pembangunan bahan pengajaran : modul pengajaran berbantu komputer bagi mata pelajaran Elektrik di politeknik. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Goh, Clarence Kok Leon (2003) A research on the effectiveness of the "english class teacher" software for improving the standards of english amongst first and second year electrical engineering students at Kolej Universiti Teknologi Tun Hussein Onn. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Ghazali, Nurol Aleyzan (2002) Penghasilan iklan bercetak sebagai media pengajaran bagi kursus perdagangan: satu tinjauan. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Gindan, Sylvester (2001) Kajian terhadap faktor-faktor yang mempengaruhi penggunaan bahan media elektronik dalam pengajaran dan pembelajaran di KUiTTHO. Masters thesis, Institut Teknologi Tun Hussein Onn.

H

Hashim, Hanis Maisarah (2018) Design and implementation of a 2.4GHz portable active RFID reader system in multi-hop wireless sensor network for indoor tracking. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Husen, Abdurezak Tahir (2017) Design and implementation of low cost wireless stethoscope. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hamzah, Ahmad Farhan (2017) Durability of self-compacting concrete with coal bottom ash as sand replacement material under aggressive environment. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Hamzah, Mohamad Hazmi (2017) Effectiveness of using empty fruit bunch, coconut fiber and sugarcane baggasse for low thermal conductivity clay bricks. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hassan, Haswira (2017) Experimental and simulation study on the effect of geometrical and flow parameters for combined-hole film cooling. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Harimon, Mohd Azhar (2017) High temperature fracture toughness and fatigue behavior of Ti-Zr-Mo and W-Re alloys for X-ray tube application. PhD thesis, Nagaoka University of Technology.

Harun, Site Hadijah (2017) Keberkesanan peta pemikiran untuk meningkatkan kemahiran berfikir aras tinggi dalam subjek sains. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Hasmurni, Hazriyanto (2017) Komitmen organisasi, kepuasan kerja dan prestasi kerja dalam kalangan pensyarah universiti di Kota Batam Indonesia. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Haron, Siti Haizatul Aishah (2017) Process flow improvement using value stream mapping to reduce waste and lead time in Malaysia healthcare. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hussaini, Iliyasu (2017) The effect of using technology task based approach on English language achievement among primary four school students in Nigeria. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Hassan, Ibnu Anas (2017) The experimental study and numerical simulation of falling liquid film flow on horizontal tubes. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hatab M Katy, Abdoasslam (2016) Measuring usability for application software using the quality in use integration measurement model. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hashim, Mohd Yussni (2016) Effect of alkali treatment conditions optimization on kenaf fiber polymer composite characterization. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Hassan, Hauwa (2016) Effects of modern instructional technology (MIT) on critical thinking skills of students in agriculture vocational courses in Nigeria. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Huang, Joanna Chuan Ying (2016) Evaluation and risk management of noise exposure among workers at palm oil mill in Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Husain, Mohd Zairi (2016) Pembangunan model konsep standard pengajaran guru pendidikan jasmani berorientasikan amalan dan kluster perwatakan guru. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Hamzah, Nurhafiza (2016) Penerimaan e-buku agama sebagai medium dakwah dalam kalangan pelajar dan pensyarah Universiti Tun Hussein Onn Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hamzah, Shahidah (2016) Penggunaan teknik bio maklumbalas bagi mengukur ciri-ciri disiplin dan tanggungjawab dalam kalangan mahasiswa. PhD thesis, Universiti Malaysia Pahang.

Hood, Hardi Selamat (2016) Penglibatan ibubapa sebagai pengurus komite sekolah terhadap kualiti pendidikan. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Hamdin, Muhammad Shafiq (2016) Potensi antourism di Taman Negara Johor Endau Rompin, Johor, Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hussien Abass Younis, Fatma (2016) Potential influence of courtyard on indoor environment conditions of office buildings. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hassan, Noraini (2016) A study of usability noise prediction model by using linear regression analysis for KTMB commuter between Shah Alam to Bukit Badak route. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hashim, Abdul Hadi (2015) Modelling traceability of KTMB train passenger. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hasan, Zahari (2015) Design and implementation of multiple user mobile robot following system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hamid, Hashima (2015) Continuous improvement CSF framework for assessing CI maturity in ISO and non-ISO certified construction contracting organizations. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Husain, Mohd Hazruwadi (2015) Evaluation of energy conversion and storage systems for vehicle's wind turbine. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hussin, Muhammad Hazim (2015) Analysis of observational techniques for assessing working postural loads in small and medium enterprises (SMEs) industry. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hassan, Mahadi (2015) Simulation of haddad surge arrester model on a 132KV overhead transmission line for back flashover analysis using altenative transient program (ATP). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Husin, Zhafir Aizat (2015) Design and optimization of three field excitation flux switching motors for hybrid electric vehicles. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hanafi, Suhaili (2015) Kesediaan pelajar dari aspek kemahiran teknikal terhadap pembentukan kebolehkerjaan di Kolej Vokasional Wilayah Selatan. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hassan, Nur Farha (2015) Pemahaman pelajar melalui aplikasi TEAL (technology enabled active learning) dalam pembelajaran amali. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hassan, Mohamed Warsame (2015) Rail transportation demand and impact study for Batu Pahat, Kluang and Mersing. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hasan, Sulaiman and Hasnan, Khalid and Md Yusof, Mohammad Zainal and Sani, Winardi (2015) Reaction kinetic model for the two-step transesterification in the biodiesel production plant. Other thesis, Universiti Tun Hussein Onn Malaysia.

Hubadillah, Siti Khadijah (2015) Study on the gas performance of ceramic membrane from kaolin prepared by phase inversion technique. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hariri, Azian (2015) The development of welding fumes health risk assessment tool for automotive component related industries. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Hussein, Ameer Saleh (2015) The effect of pre-processing techniques and optimal parameters on BPNN for data classification. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hassan, Shayma Naif (2015) An efficient backoff algorithm for IEEE 802.15.4 with MAC techniques in slotted CSMA/CA networks. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hassan Saeed, Waddah Waheeb (2015) The performance of soft computing techniques on content-based SMS spam filtering. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hassan, Mohd Fahrul (2014) A framework for the sustainability evaluation of product configuration design. PhD thesis, Universiti Teknologi Malaysia.

Ho, Meei Hoan (2014) Potential of using cement-rubber chips and cement-sand as additives in stabilised soft clay. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Hagihassan, Hussein Mohamed (2014) Compact microstrip band-pass filter for EMI reduction. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hussein , Maher Ali (2014) Development of a computer aided decision support tool for selecting organisational improvement initiatives. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hamzah, Shipun Anuar (2014) Development of harmonic suppressed reconfigurable fractal dipole antenna. PhD thesis, Universiti Teknologi Malaysia.

Hamzah, Ahmad Azlan (2014) Effect of gap lenghts of sphere-sphere electrodes on air breakdown level under lightning impulse. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hamin, Farhana (2014) Electronic problem based learning (ePBL) sebagai medium bagi memudahcarakan pembelajaran pemindahan ilmu dalam kalangan pelajar UTHM. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hassim, Hairul Mubarak (2014) Finite element analysis of general three dimensional space frame. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hussin, Noraziah (2014) Frequency response on the effect of combine cycle load rejection test. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Harun, Muhd Hanis (2014) High reliability private cloud storage with minimal operation cost using multi-objective optimization. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hashim, Mohd Norhafiz (2014) Implementation of real-time system on FPGA board for human's face detection and tracking author. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hamjah, Mohd Khairulamzari (2014) Optimization of new semi-automatic TIG welding process for surface quality through Taguchi Method. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hussian, Ammar Husaini (2014) PID-hysteresis voltage control technique for three phase induction motor (MATLAB SIMULINK and ARDUINO). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hassan, Mohd Hafiz (2014) Production improvement in a small and medium sized enterprise (SME) using lean production approach. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hassan Disina, Abdulkadir (2014) Robust Caesar cipher against frequency cryptanalysis using bi-directional shifting. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hashim, Siti Arfah (2014) Selection and implementation of quality control and improvement initiatives: case studies of two Malaysian manufacturing companies. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hamid, Nor Baizura (2014) Sistem penggera keselamatan banjir domestik (D'FESAS). Other thesis, Universiti Tun Hussein Onn Malaysia.

Hussin, Mohd Najib (2014) Three phase inverter for induction motor by using PI-repetitive controller with Arduino. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Habib Shah, Habib Shah (2014) An improved artificial bee colony algorithm for training multilayer perceptron in time series prediction. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Hasan, Sulaiman and Sebayang, Darwin and Untoro, P. and Mohd Rus, Anika Zafiah and Mohd Daim, Ahmad Daud and Praptijanto, Achmad and Agustian, Egi and Leong, Boon Soon and Mohd Yusoff, Nurrul Rahmah (2014) The novel continues biodiesel using ultrasound clamp tubular reactor. Other thesis, Universiti Tun Hussein Onn Malaysia.

Hamid, Nurul Hidayah (2013) Cabaran pelajar antarabangsa di Kolej Kediaman UTHM. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hermadi, Madi (2013) Developing new chemical-rheological models and chemical-durability indices of bitumen. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Haris, Nur Ismalina (2013) Failure analysis of conveyor chain links: a case study at Top Glove Sdn. Bhd. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hashim, Mohd Nasri (2013) Induction motor modelling using fuzzy logic. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hor , Peay San (2013) Influence of speed and flow rate on road accidents: a case study along federal Route 50 (FT 050). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hanzah, Nurulhuda (2013) Intelligent power system protection data management. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hashim, Nurul ‘Izzati (2013) Investigation of numerical technique to evaluate frequency response analysis (FRA) data measurement of auto power transformer. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hassan , Hashimah Kho (2013) Kajian terhadap ketahanan hentaman ke atas konkrit berbusa yang diperkuat dengan serat kelapa sawit. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hamdan, Siti Hajar (2013) Kecenderungan graduan wanita kejuruteraan terhadap pemilihan profesion kerjaya bukan jurutera. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Harun, Farahiyah Murni (2013) Keyakinan diri pelajar Diploma Pendidikan Lepasan Ijazah di Universiti Tun Hussein Onn Malaysia terhadap ICT. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Haron, Hartini Sharninayati (2013) Linear quadratic regulator (LQR) controller design for dc servo motor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Halim, Nurul Shafinaz (2013) Menentusahkan faktor tekanan kerja guru sekolah menengah gred A daerah Batu Pahat. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hamzah, Mohd Hamdi (2013) Modeling the open source software development processes using IDEF3 standard. Masters thesis, Universiti Putra Malaysia.

Hashim, Mokhtar (2013) Optimization of stand-alone photovoltaic system by implementing fuzzy logic MPPT controller. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hassan Suliman, Khaled Abubaker (2013) Simulation of AC-DC converter for DC motor application using fuzzy logic control. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hosni, Nor Ain Jamil (2013) Wear behaviour of advanced multilayer coating pvd-tiaIn in dry machining of AISI D2 hardened steel. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hassan, Hashimah (2012) Kesan penggunaan digital electronics kit terhadap pencapaian pelajar yang berbeza gaya kognitif. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hamdan, Rafidah (2012) Aerated rock filter as a polishing unit for total nitrogen & phosphorus removal from domestic wastewater part 1. Other thesis, Universiti Tun Hussein Onn Malaysia.

Hussaini, Muazan (2012) Application multicriteria decision making method to determine the placement of auto recloser circuit breaker in power distribution system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hamid, Nurin Hariza (2012) Aspirasi kerjaya dalam kalangan pelajar bermasalah pendengaran di Politeknik. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hashim, Rathiah and Abdul Kahar, Rosmila and Abdul Kahar, Rosdinar and Younes, Saadi (2012) Contour matching using ant colony optimization and curve evolution. Other thesis, Universiti Tun Hussein Onn Malaysia.

Hashim , Hairulazwan and Ribuan , Mohamed Najib (2012) Development of rope climbing robot and fire fighting robot for Malaysian university robot competition (MUROC). Other thesis, Universiti Tun Hussein Onn Malaysia.

Hamdan, Hasri (2012) Indoor performance of wireless sensor network. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hasan, Azman (2012) Instrumen penilaian pembimbing dalam pelaksanaan pembelajaran berasaskan kerja pelajar di industri. PhD thesis, Universiti Teknologi Malaysia.

Husaini, Noor Aida (2012) The Jordan Pi-Sigma neural network for temperature prediction. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hasbullah, Amilia (2012) Kajian penilaian prestasi komiti sekolah dalam pengurusan fasiliti di sekolah dasar di Kabupaten Batubara, Indonesia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hashim, Hilsha (2012) Kerangka amalan jaminan kualiti bagi pelaksanaan pengakreditan pembelajaran berasaskan pengalaman terdahulu (accreditation of prior experiential learning) di Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hasnan, Khalid and Sh. Ahmad, Sh. Salleh and Yahya, Mohd Shahir and Razali, Imran and Ahmed Soomro, Aftab (2012) The framework and analysis tool to evaluate the effect of product design to the performance of manufacturing system. Other thesis, Universiti Tun Hussein Onn Malaysia.

Hussein Al-Amri, Ali Abdullah (2012) The total quality management practices in Yemeni Public Universities. Masters thesis, Universiti Tun Hussein Onn Malaysia.

H. Nurman, S, Siti Nurhidayah (2011) Mengukur keselamatan dan keslhatan fasllitl sekolah tadika swasta di Medan. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Herawan, Tutut (2010) Rough set approach for categorical data clustering. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Hamdan, Rafidah (2010) Aerated blast furnace slag filters for enhanced nitrogen and phosphorus removal from small wastewater treatment plants. PhD thesis, The University of Leeds.

Hassan, Mohd Fahrul (2009) Design and development of an innovative apparatus for producing a spiral catalyst substrate for catalytic converter. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hariri, Azian (2009) Conceptual design of a small non-rigid airship with particular attention to its static and dynamic stabilit. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hasan, Siti Normah (2009) Bootstrap confidence intervals for the mode of log-logistic hazard function. Masters thesis, Universiti Putra Malaysia.

Ho, Fu Haw (2008) Production scheduling system for job shop enterprise using ant colony optimization approach. Masters thesis, Universiti Teknologi Malaysia.

Ho, Meei Hoan (2008) Some mechanical and chemical properties of cement stabilized Malaysian soft clay. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hashim, Mohd Nurhanif (2008) Simulation model for effective supply chain management using arena. Masters thesis, Universiti Tun HUssein Onn Malaysia.

Hassan , Nurhafizzah (2008) A preliminary study of turning of composite. Masters thesis, University of Liverpool.

Hadi , Sapinah (2008) Kajian terhadap jenis dan format program latihan dalam program pembangunan profesionalisme di Universiti Tun Hussein Onn Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hassan, Razali (2008) How do learners respond to computer based learning material which has been designed to suit their particular learning style. PhD thesis, University of Warwick, Institute of Education.

Hasan , Haris Fadillah (2007) Kesan penggunaan perisian multimedia di kalangan pelajar teknikal yang berbeza gaya kognitif field independent (FI) dan field dependent (FD). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hatta, Nasrul (2007) Preparation and mechanical properties of palm fiber/polylactic acid composites. Masters thesis, Nagoya Institute of Technology.

Hai Kelian, Virakwan (2006) Keberkesanan program industrial skills enhancementn programme (insep) dalam membantu peningkatan kemahiran kebolehpekerjaan peserta program di pusat pembangunan kemahiran negeri. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Hashim, Hairulazwan (2006) A study on industrial communication networking:ethernet based implementation. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Hamdan , Rohaiza (2006) Electric field study of silicon rubber insulator using finite element method (SLIM). Masters thesis, Universiti Teknologi Malaysia.

Husin, Siti Huzaimah (2005) CIM control design using GRAFCET. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Hamid Ali, Firkhan Ali (2004) Vulnerability analysis on the network security by using Nessus. Masters thesis, Universiti Teknologi MARA.

Hamid, Halina (2004) Pembangunan web CD prosedur kerja luar ukur teodolit makmal teknologi ukur pembinaan, KUITTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Hat , Mohd. Kamal (2004) Pembinaan pakej trainer board mikro pengawal 16F84 : kajian terhadap kesesuaian penggunaanya sebagai ABBM bagi mata pelajaran Sistem Mikropemproses dan Mikro Pengawal di kalangan pelajar Kejuruteraan Elektrik pada peringkat ijazah pertama di KUITTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Haruddin, Hashamiza (2004) Pengintegrasian aspek-aspek kemahiran generik dalam proses pengajaran dan pembelajaran bagi program kemahiran tinggi selaras dengan keperluan industri : satu kajian kes di Pusat Latihan Teknologi Tinggi (ADTEC) dari perspektif pengajar. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Hussain, Mohamad Reduan (2004) Program Pendidikan Khas (pekak) di Institusi Pendidikan Teknikal Kementerian Pendidikan Malaysia. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Husin@Che Hamat, Mohd Azian (2004) Penghasilan dan penilaian modul pemetaan minda dalam subjek Undang-undang Syarikat (P420) di politeknik. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Hussin, Husnira (2003) Pembangunan bahan pembelajaran berbentuk CD-ROM interaktif bagi subjek Kartografi di politeknik. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Harun Habib, Mohammed Ilias (2003) Pembangunan modul pembelajaran kejuruteraan bekalan air dan air sisa bagi kursus kejuruteraan awam di politeknik. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Hassan, Mohd Shabri (2003) Penghasilan dan penilaian video dokumentari pendidikan bagi subjek pencukaian Malaysia 2:satu kajian di politeknik-politeknik Malaysia yang terpilih. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Hussin, Mohd Sabri (2003) Pembinaan web CD pembelajaran bagi mata pelajaran lukisan berbantukan komputer (AutoCAD) dalam penghasilan permodelan 3D. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Hamdan, Hasri (2003) Kebolehgunaan pembelajaran berbantu komputer bagi mata pelajaran Sistem Elektronik 2 untuk pelajar Politeknik. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Hashim, Haszlina (2003) Kriteria pemilihan jenis pakej perisian perakaunan bagi memenuhi keperluan silabus diploma perakaunan di politeknik. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Hashim, Hasmaini (2003) Pembangunan bahan pembelajaran: modul pembelajaran berasaskan komputer bagi keperluan mata pelajaran litar AU di Kolej Komuniti. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Hamzah, Muhammad Rafie (2003) Penghasilan dan penilaian cd modul pembelajaran kenderi (mpk) sistem catatan bergu untuk mata pelajaran perakaunan awalan (P 1105) di Politeknik Seberang Perai. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Hasan, Zaki (2003) Penghasilan dan penilaian modul pengujian ke atas konkrit basah bagi pelajar kursus kejuruteraan awam. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Harun, Nafisah (2003) Penghasilan modul pengajaran kendiri matapelajaran kartografi bagi kursus ukur tanah di Politeknik Ungku Omar. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Hashim, Munshi (2003) Sistem pemprosesan maklumat pelajar sekolah menengah teknik. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Harun, Hasniza (2003) Tinjauan terhadap permasalahan pelajar Sarjana Pendidikan Teknik Vokasional(KUiTTHO) dalam menjalani latihan mengajar. Masters thesis, Kolej Universiti teknologi Tun Hussein Onn.

Husain, Salmiah (2003) Persepsi pelajar terhadap aspek-apek penempatan di asrama dan hubungan dengan pencapaian akademik pelajar: satu tinjauan ke atas Sekolah Menengah Teknik Pasir Mas. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Haris, Mohd Heirwan (2003) Automated payroll system. Masters thesis, German-Malaysia Institute.

Hussin, Nor Haziah (2003) Kajian tahap profesionalisme keguruan lepasan Sarjana Pendidikan KUiTTHO di Politeknik. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Hashim, Noor Azlina (2002) Kesesuaian penggunaan perisian pendidikan berbentuk cd rom dalam proses pengajaran dan pembelajaran. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Harun, Zulhazri (2002) Pembangunan sistem maklumat program latihan mengajar berasaskan web:satu kajian di KUiTTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Hasbollah, Md Fadzil (2002) Kaedah penulisan ilmiah yang diterima pakai pensyarah JPTV KUiTTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Hanis, Siti Aishah (2002) Modul pengajaran elektronik digit dan sistem logik bagi fakulti teknologi kejuruteraan. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Harun, Mazlina (2002) Peluang kerjaya lepasan SPMV dalam bidang elektronik di sektor industri bagi menghasilkan carta aliran kerjaya : satu kajian di tiga buah kilang di daerah Batu Pahat, Johor. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Harun, Norwani (2001) Cabaran penggunaan teknologi maklumat di kalangan pensyarah: satu kaj1an kes di kuittho. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Harun, Mohd Mohadir (2001) Apakah jurang digital menghasilkan pelajar berisiko? (tinjauan ke atas pelajar Diploma Kejuruteraan Mekanikal (DWA) tahun satu dan dua, dan pensyarah Jabatan Kejuruteraan Mekanikal di KUiTTHO. Masters thesis, Institut Teknologi Tun Hussein Onn.

Hamat, Rosni (2001) Fungsi program persediaan kerjaya :satu kajian kes di kalangan siswazah program Sarjana Pendidikan (Teknikal) Kolej Universiti Teknologi Tun Hussein Onn (KUiTTHO), Batu Pahat, Johor. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Hashim, Mohd Hafiz (2001) Satu tinjauan keberkesanan faktor-faktor yang mempengaruhi prestasi pelajar Sarjana Muda (Lukisan Kejuruteraan) di Kolej Universiti Teknologi Tun Hussein Onn. Masters thesis, Institut Teknologi Tun Hussein Onn.

Hussien, Atan (2000) Keseragaman persijilan kemahiran Malaysia tahap 1 (lukisan struktur dan kejuruteraan awam) di institut - institut latihan awam. Masters thesis, Institut Teknologi Tun Hussein Onn.

I

Ishak, Nadiah (2018) Application of bacterial ligninase enzymes from rynchophorus ferrugineus’s gut consortium in agropulp biodelignification. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ismail, Nur Amalina (2017) Documentation, anti-aging activities and phytochemical profiling of selected medicinal plants used by Jakun women in Kampung Peta, Mersing, Johor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ismail, Muammar Mukhsin (2017) Effect of fuel delivery ratio of Diesel-CNG dual fuel engine on performance and emissions. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ismail, Izdihar (2017) Ethnobotanical and ethnopharmacological documentation of antimalarial plants used by the Jakun community in Kg Peta, Endau-Rompin, Johor, Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ibrahim@Tamrin, Mohd Norihan (2017) Nonlinear Johnson Cook material constitutive model for high speed impact using finite element analysis. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Irchamni, Siti Marpuah (2017) Penguasaan komunikasi bahasa Arab melalui kaedah aktif komunikatif di sekolah menengah agama. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Irfan, Masooma (2017) Sulfonated polyethersulfone and functionalized MWCNT/PVP nanocomposite membrane for protein separation. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Isah, Abdulnasir (2017) Wavelets operational methods for fractional differential equations and systems of fractional differential equations. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Ibrahim, Farah Nur Diyana (2017) The efficiency of chitosan-feldspar-zeolite biohybrid adsorbent in treating landfill leachate. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ishaq, Aisha Gogoba (2016) Antibacterial activities of lipid and pigment extract of Scenedesmus sp. isolated from the temporary waters of Endau Rompin. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ismail, Nurul Izzatty (2016) Development of implementation models for hospital information system (HIS) in Malaysian public hospitals. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Ibrahim, Izzati Izwanni (2016) Effectiveness study of vertical and horizontal aerated steel slag filter for nitrogen removal from domestic wastewater. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ishiyaku, Bala (2016) Evaluation of Nigerian public housing performance using occupants’ experience and satisfaction. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Isah, Nuhu (2016) Flood occurrence, smart tunnel operating system and traffic flow: a case of Kuala Lumpur smart tunnel Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ismail, Mohamad Shukri (2016) Gaya pembelajaran dan kemahiran berfikir aras tinggi dalam kalangan pelajar teknikal. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ibrahim Al-Taie, Hatem Sabeeh (2016) Heat and mass transfer of nanofluid flow in the presence of variable stream conditions. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ismail, Shamsullarifin (2016) Investigative model of rail accident and incident causes using statistical modelling approach. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Izam, Saslizawati (2016) Kemahiran kebolehkerjaan pelajar SMPK Vokasional Indahpura bermasalah pembelajaran. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ibrahim, Mohamud Ahmed (2016) Mobile technologies and their intention to use for learning among students at Malaysian technical universities. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ibrahim Mukhtar, Marina (2016) Penilaian pelaksanaan pentaksiran kompetensi pensijilan modular (PKPM) di sekolah menengah vokasional. PhD thesis, Universiti Kebangsaan Malaysia.

Ismail, Mohd. Azizan (2016) Permodelan keupayaan tenaga serapan bagi tiub pelindung laga menggunakan kaedah unsur terhingga. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Insaf Ali Siming, Insaf (2016) An investigation of science and engineering undergraduates’ motivation towards learning English in Pakistan. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Ismail, Mohd Erfy (2015) Permodelan faktor-faktor pencapaian sains TIMSS Malaysia 2011. PhD thesis, Universiti Sains Malaysia.

Ibrahim, Jeffri Amran (2015) Kesan pemadanan antara persembahan multimedia dengan gaya pembelajaran pada laman web adaptif terhadap tahap penguasaan dan kepuasan pelajar kejuruteraan elektrik. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Ishak, Syahida (2015) Study of venous wall behaviour for early diagnosis of deep vein thrombosis (DVT). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ibrahim, Siti Aida (2015) Development of titanium dioxide nanoparticles/nanosolution for photocatalytic activity. PhD thesis, Universiti Sains Malaysia.

Ibrahim, Mohd Izham (2015) Feed rate effects on filament extrusion for freeform filament fabrication. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Imbargk Ebra, Zuher Mesken (2015) Localizatation estimation using the technique of multi-sequence positioning. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ibrahim, Nor Zaidatun Nadrah (2015) Crosstalk suppression techniques for multi-channel regeneration based on fiber optic parametric amplifier. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ibrahim, Anis Nabihah (2015) Design of microstrip antenna based on different material properties. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Isa, Khalid (2015) Homeostatic-inspired controller algorithm for a hybrid-driven autonomous underwater glider. PhD thesis, Universiti Sains Malaysia.

Imran, Muhammad (2015) Metaheuristic based relevance feedback optimization with support vector machine in content based image retrieval. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Idris, Mohd Azli (2015) Vibration simulation of a simply-supported beam with attached multiple absorbers. Masters thesis, Universiti Tun Hussein Onn Malaysia.

idrus, Nur Asfarina (2015) The performance of directional flooding routing protocol for underwater sensor networks. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Idris, Muhammad Ridzuan (2015) Effects of chromium powder mixed in electrical discharge machining of AISI D2 hardened steels. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ismail, Nurul Ashikin (2015) Etnoentomologi dalam kalangan kaum Orang Asli dan Melayu di Semenanjung Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ishak, Rohaidah (2015) Hubungan burnout dengan kepuasan kerja dalam kalangan guru-guru Kemahiran Hidup Bersepadu (KHB) sekolah menengah di Daerah Batu Pahat. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ismail, Fatimah (2015) Kemahiran menvisualisasi ruang dalam kalangan pelajar bagi mata pelajaran Pendidikan Seni Visual. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ismail, Affero (2015) Mediation effect of supervisory alliance on the supervisor-supervisee relationship for effective supervision. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Ismail, Irwan Mahazir (2015) Pembangunan dan pengujian prototaip pembelajaran mobile berasaskan prestasi (MOBICAD) dalam kursus reka bentuk berbantu komputer (CAD). PhD thesis, Universiti Kebangsaan Malaysia.

Ismail, Siti Nor Ainsyah (2015) Penguasaan teknik kemahiran fasilitator dalam pelaksanaan pembelajaran berpusatkan pelajar di Universiti Tun Hussein Onn Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ilmin, Siti Syazwani (2015) Study of mouthguard design for endurance and air-flow enhancement. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ismail, Firdaus (2014) The critical success factors of event management : a focus on meetings, incentives, conventions & exhibitions (MICE) in Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ismail @ Marzuki, Mohd Saiful Najib (2014) Hysteresis voltage control technique for three phase induction motor (Matlab Simulink and Arduino). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ismail, Farah Najwa (2014) Kecerdasan emosi dan komitmen organisasi dalam kalangan pensyarah di Politeknik Sultan Abdul Halim Muadzam Shah, Jitra, Kedah. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ismail, Muhammad Yusri (2014) One-dimensional simulation of a retrofitted medium duty engine running using compressed natural gas. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Iberahim, Hasmah (2014) Pengaruh faktor persekitaran terhadap kecemerlangan akademik pelajar Fakulti Kejuruteraan Mekanikal dan Pembuatan serta pelajar Fakulti Kejuruteraan Elektrik di UTHM. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ibrahim, Ismail Ishaq (2014) Performance studies of HEFSM with 6 slot- 7 pole for HEV application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ismail, Ismaaini (2014) Risk assessment of time and cost overrun factors throughout construction project lifecycle. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ibrahim, Muhammad Shahrul Shafendy (2014) Treatment of food processing industrial wastewater using two stages anaerobic system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ismail, Sushilawati (2014) Water absorption and salt attack resistance of coal ash brick made of different percentage of foam content. Masters thesis, Universiti Teknologi Mara.

Ibrahim, Zarina (2014) A comparative study of the AHP and Topsis methods for implementing load shedding scheme in a pulp mill system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Iderus, Samat (2014) The field oriented control of a permanent magnet synchrounous motor (PMSM) by using fuzzy logic. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Isa Ashyap, Adel Yahya (2014) A multi-band integrated electromagnetic field detection system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ibrahim, Muhammad Iskandar (2013) Development of an AC-DC buck power factor correction. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ibrahim , Mohd Halim Irwan (2013) Characterization of waste polyethylene terephthalate (PET) as a sustainable binder for the application of green metal injection molding. Other thesis, Universiti Tun Hussein Onn Malaysia.

Ismon, Maznan (2013) Condition monitoring of variable speed worm gearbox lubricated with contaminated gear oil. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ismail, Zul-Atfi (2013) DMOSYS: defect monitoring system for building maintenance at polytechnic. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Izazu, Nur Zuriani (2013) Decision-making on pv modules for very large scale photovoltaic systems using improved analytic hierarchy process. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Iberahim, Suzilawati (2013) Design and development of pyrolysis system to produce wood vinegar. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ismail, Lokman Hakim and Ghazali, Rozaida and Khamidi, Mohd Faris and Abdul Wahab, Izudinshah and Abdul Razak, Azman and Ghazali, Suraya (2013) Development of recurrent neural network modelling for indoor temperature and indoor air quality (IAQ) prediction: a reflection of outdoor parameters. Other thesis, Universiti Tun Hussein Onn Malaysia.

Ismail, Nurfakhirah (2013) Fuzzy logic controller design for inverted pendulum system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Inun, Haidie (2013) Path planning algorithm for a car like robot based on voronoi diagram method. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Idris, Azrini (2013) Performance analysis for facial expression recognition under salt and pepper noise with median filter approach. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ibrahim, Mohammed Khaleel (2013) Seamless horizontal handover algorithm for homogeneous wireless mobile networks using fuzzy logic. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ishak, Siti Hajjar (2013) Tinjauan terhadap amalan keselamatan dalam kalangan pelajar dan pensyarah di Makmal Kejuruteraan Universiti Tun Hussein Onn Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ibraheem, Amjed Khaleel (2013) An application of artificial neural network classifier for medical diagnosis. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ismail@Abd Wahab, Aruna (2013) The development of a new Malaysian skills qualification Framework (MSQF) in the context of National Dual Training system (NDTS). PhD thesis, Universiti Tun Hussein Onn Malaysia.

Ibrahim , Noraini (2013) An enhanced UML consistency checker using logical approach. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Ismail, Nur Farhani (2012) Consolidation of single and double layers ceramic structure. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ismail, Lindawati (2012) Acoustic and durability performances of Arenga Pinnata panel. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ismail, Al Emran (2012) Analisis mekanik patah pada retak dalam bar berbentuk silinder padu. PhD thesis, Universiti Kebangsaan Malaysia.

Ismoen, Muhaimin and Kandasamy, Ramasamy and Kasmani, Ruhaila and Mohamad, Radiah (2012) Boundary layer numerical investigation of the effects of heat and mass transfer on boundary layer flows over various porous surfaces with heat radiation in the presence of suction or injection. Other thesis, Universiti Tun Hussein Onn Malaysia.

Ibrahim, Muhamad Fadir (2012) Cabaran golongan belia menceburi bidang keusahawanan kajian kes: Parit Raja, Batu Pahat, Johor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ibrahim, Badaruddin (2012) Exploring the relationships among creativity, engineering knowledge, and design team interaction on senior engineering design projects. PhD thesis, Colorado State University.

Ibrahim, Rosziati (2012) Finding new steganography algorithm to hide data in image. Other thesis, Universiti Tun Hussein Onn Malaysia.

Ibrahim , Mohd Halim Irwan (2012) Kebolehacuanan suntikan logam mikro SS 316L menggunakan bahan pengikat PEG dan PMMA. PhD thesis, Universiti Kebangsaan Malaysia.

Ismail, Suriana (2012) Kesediaan guru terhadap pelaksanaan mata pelajaran Reka Bentuk dan Teknologi (RBT) sekolah rendah di Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ibrahim, Noor Azliza (2012) Modeling of micro hydroelectric system design. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ibrahim , Ihfasuziella (2012) Pembangunan model caj ruang bagi pengurusan ruang akademik yang optimum di Institusi Pengajian Tinggi, Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ibrahim, Ihfasuziella and Wan Yusoff, Wan Zahari (2012) Pembangunan model caj ruang bagi pengurusan ruang akademik yang optimum di institusi pengajian tinggi, Malaysia. Other thesis, Universiti Tun Hussein Onn Malaysia.

Ibrahim, Mohd Zamri (2012) Tahap penguasaan kemahiran insaniah dalam kalangan pelajar tahun akhir di Kolej Antarabangsa IKIP. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ibrahim, Mohd Tarmizi (2011) Line and wall follower hexapod robot. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Imran, Nik Farhanim (2011) Tensile force and bond stress of longitudinal reinforcemenet in heavily reinforced concrete beam. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ismail, Muhammad Yusof and Mohd Zain, Ahmad Faizal and Abdullah, Mohamad Faiz Liew and Amin , Muhammad (2011) Dynamic phase control of reflectarray antenna based on non-linear dielectric material. Other thesis, Universiti Tun Hussein Onn Malaysia.

Ismail, Muhammad Yusof and Inam, M. and Abdullah, Jiwa (2010) Design optimization of reconfigurable reflectarray antenna based on phase agility technique. Other thesis, Universiti Tun Hussein Onn Malaysia.

Ibrahim, Mohd Rasidi (2010) Vibration assisted machining: modelling, simulation, optimization, control and applications. PhD thesis, Brunel University.

Ismail, Mohd Sabri (2009) Metodologi dakwah kepada saudara baru di PERKIM Kelantan :kajian mengenai keberkesanan. PhD thesis, Universiti Malaya.

Ismail, Mohd Fazli Khaisunizam (2008) Model kognitif visual pelajar teknikal melalui perisian animasi grafik. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ibrahim@Tamrin, Mohd Norihan (2008) Stiffness and vibrational characteristics of SMS/DER331 composites with shape memory alloy long fibers. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ismail, Lokman Halim (2007) An evaluation of bioclimatic high rise office buildings in a tropical climate : energy consumption and users' satisfaction in selected office buildings in Malaysia. PhD thesis, University of Liverpool.

Ismail, Mohd Norasri (2007) A data model for multimedia database of malaysian cultural heritage artefacts management. Masters thesis, Universiti Teknologi MARA.

Ismail , Nurulhuda (2007) Modeling of electromagnetic wave penetration in a human head due to emissions from cellular phone. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ibrahim, Mustaffa (2007) A study on the fabrication of multi material 3D patterns using inkjet printing technology. PhD thesis, Kyushu Institute of Technology.

Ibrahim , Aziyati (2006) Gaya pengurusan konflik : hubungannya dengan faktor jantina, kursus diambil semasa ijazah pertama dan personaliti di kalangan pelajar Sarjana Pendidikan Teknik dan Vokasional. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Ibrahim , Mohd Halim Irwan (2005) The effect of buckling in FRP members. Masters thesis, Universiti Teknologi Malaysia.

Ihkasan, Mohd Nor (2005) Pembangunan staf untuk pengintegrasikan e-pembelajaran di politeknik. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Isa, Khalid (2005) Vision-based autonomous vehicle driving control system. Masters thesis, Universiti Putra Malaysia.

Ibrahim , Ismail (2004) Identification of a probability distribution for extreme rainfall series in East Malaysia. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Isa, Muzamir (2004) Investigation in fuel cells using hydro-genius teach. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Ibrahim, Samsinor (2004) Penghasilan dan penilaian video pembelajaran (CD) bagi mata pelajaran Prinsip Ekonomi (BPA 1013) bertajuk permintaan dan penawaran di KUITTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Ismil, Abdull Sulaiman (2004) Penghasilan manual garis panduan pembinaan item aneka pilihan. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Ismail , Mohd Faizal (2004) Penghasilan dan kajian tentang modul pembelajaran Prinsip Kejuruteraan Elektrik (PKE 1) di KUiTTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Ibrahim Mukhtar, Marina (2003) Penghasilan album elektronik untuk subjek penyenggaraan kerja kayu dalam proses pengajaran dan pembelajaran. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Ismail, Izwan (2003) Development of a multimedia enhanced web prototype for technical learning instrument. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Ismail , Nor Lailihuda (2003) Pembangunan model kualiti bagi modul pengajaran kendiri (MPK) menggunakan kaedah Quality Function Deployment (QFD). Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Ismail, Nor Hayati (2003) Satu tinjauan terhadap tahap pengetahuan guru-guru teknikal di tiga buah sekolah teknik tentang pembinaan item subjektif. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Isnin, Sabrina (2003) Pengetahuan dan kemahiran teknologi maklumat dan komunikasi di kalangan pensyarah jabatan perdagangan politeknik: satu tinjauan. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Ismail, Nurhuda (2003) Satu tinjauan terhadap tahap pengetahuan guru teknikal dalam pembinaan item objektif di tiga buah sekolah menengah teknik. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Ibrahim, Noraini (2003) Lecture assessment systems (login module and manage user module). Masters thesis, Universiti Teknologi Malaysia.

Ismail, Muhamad Azlin (2003) Pembangunan dan pengujian modul pembelajaran kendiri dalam bentuk cakera padat berinteraktif (sistem digit dan instrumentasi). Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Ismail , Amirul (2003) Penghasilan dan penilaian modul pembelajaran aturcara mikropemproses 68000. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Ibrahim, Mohamad Shahril (2003) Penghasilan modul pembelajaran interaktif berkonsepkan multimedia bagi mata pelajaran autocad 3d modelling. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ismail, Siti Azliya (2003) Ciri-ciri yang mempengaruhi pelatih aliran kemahiran untuk menjadi seorang usahawan: satu tinjauan di Institut Kemahiran Mara Lumut, Manjung Perak. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Ibrahim, Mastura (2003) Keberkesanan pelaksanaan kerja makmal program Teknologi Kejuruteraan Mekanikal KUiTTHO : sistem penilaian ujikaji makmal Teknologi Kejuruteraan Mekanikal. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Ismail, Mahanom (2003) Membina dan menilai kesesuaian modul pembelajaran kendiri untuk pelajar Diploma Pengajian Perniagaan semester 6 di Politeknik Ungku Omar bagi matapelajaran prinsip dan amalan insurans. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Ismail, Suhairi (2003) Pengautomasian maklumat aktiviti pelajar di Pusat Kaunseling dan Pembangunan Pelajar Kolej Universiti Teknologi Tun Hussein Onn. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Ismail, Rosmaria (2003) Penentuan tahap kesediaan pelajar terhadap pembelajaran maya. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Ismail, Muhamad Fahezal (2003) Dynamic simulation, modeling, and analysis of an automated sealing and pre-cut plastic bag machine. Masters thesis, German-Malaysia Institute.

Ismail, Zaitun (2003) Penggunaan manual pengajaran guru dalam pengajaran dan pembelajaran matematik gunaan (geometri koordinat). Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Ismail, Yusdi (2003) Gangguan seksual di dalam industri perhotelan : ke arah pembentukan panduan mengatasi gangguan seksual. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Ibrahim, Sakinah (2003) Kerjasama dan perkongsian sumber sebagai strategi meningkatkan kualiti dalam bidang pendidikan teknik dan vokasional : satu tinjauan di Kolej Universti Teknologi Tun Hussein Onn. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Ismail, Azizan (2003) Optimizing colour resolusion in 3D model and animation for fast rendering time between PC and Macintosh. Masters thesis, Universiti Putra Malaysia.

Ishak, Quyrul Zeta (2002) Penggunaan blackboard5 dan faktor-faktor yang mempengaruhi pengguna blackboard5 dalam proses pengajaran dan pembelajaran di kalangan pelajar sarjana semester 3, sarjana pendidikan teknik dan vokasional, Kolej Universiti Teknologi Tun Hussein Onn: satu kajian kes. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Ismail, Norhafizah (2002) Pembangunan modul pengurusan dan identifikasi stail kepimpinan (MPISK) untuk latihan dan pendidikan bagi sektor penghasilan seramik di Johorcraft Village, Simpang Renggam, Johor. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Ismail, Norhayati (2002) Kajian kemahiran pelajar sarjana Pendidikan Teknik dan Vokasional semester 3 KUiTTHO membangunkan courseware pendidikan dari segi teknologi dan teori pedagogi. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Ismail, Muhd. Nazmi (2002) Kajian persekitaran di sebuah kolej universiti terhadap keselesaan aktiviti pengajaran dan pembelajaran. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Iberahim, Zuhaida (2002) Kesan penggunaan ABBM dalam mata pelajaran C 213 Teknologi Binaan dan Bahan : kajian kes di Politeknik Kota Bharu. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Ishak, Izlin Zuriani (2002) Kualiti pensyarah politeknik lepasan Sarjana Pendidikan Kolej Universiti Teknologi Tun Hussein Onn. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Ibrahim, Shuhaila (2002) Peluang kerjaya lepasan politeknik bidang elektronik dan elektronik dan elektrik di sektor perindustrian elektronik di daerah Batu Pahat. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Ishak, Isfa Kamal (2002) Pembangunan templat laman web interaktif untuk pensyarah politeknik. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Ismail, Nor Mazana (2001) Hubungan di antara gaya kepimpinan ibu bapa dengan pelanggaran disiplin pelajar-pelajar tingkatan empat di Sekolah Menengah Teknik Slim River, Perak. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Irahim, Zalinda (2001) Aplikasi penggunaan komputer sebagai alat bantu mengajar dalam proses pengajaran dan pembelajaran di kalangan pensyarah-pensyarah Sarjana Pendidikan Teknikal, KUiTTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Ibrahim @ Ab Rahman, Hasbullah (2001) Kajian terhadap kemahiran berfikir dan gaya pembelajaran di kalangan pelajar Diploma Kejuruteraan Mekanikal tahun 2 sesi 2001/2002 di KUiTTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Ismail, Erina (2001) Kesan pengetahuan dan kemahiran pengajaran berasaskan web terhadap persepsi kualiti pengajaran di kalangan pensyarah. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Idris, Isratun (2001) Meninjau tahap penglibatan orang dewasa dalam pendidikan teknik dan vokasional melalui kelas anjuran Bahagian Kemajuan Masyarakat (KEMAS). Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Ismail, Asmelinda and Abd Hamid, Faizatul Amla and Badri, Bahariatulani (2001) Pelaksanaan sistem penilaian bestari satu tinjauan ke atas Sekolah Menengah Kebangsaan Temenggung Ibrahim, Batu Pahat, Johor dan Sekolah Menengah Kebangsaan Dato' Penggawa Barat Pontian, Johor. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Ismail, Mohd Sabri (2000) Perkembangan Islam di kalangan Orang Asli dari tahun 1987 - 1997: satu tinjauan dan sudut penermaan masyarakat asli di Post Brook Gua Musang, Kelantan. Masters thesis, Universiti Malaya.

Ibrahim, Mustaffa (1998) Variability reduction in stencil printing of solder paste for surface mount technology. Masters thesis, Universiti Teknologi Malaysia.

J

Ja’apar, Faizah (2017) Bahan bantu mengajar (BBM) dalam pengajaran dan pembelajaran (P&P) di Sekolah Menengah Kebangsaan (SMK) daerah Pontian. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jaafar, Marliana (2017) High dimensionality carrierless amplitude phase modulation technique for radio over fiber system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jamaludin, Junaidi (2017) Nonlinear effects of multi-wavelength fiber laser and four wave mixing signals generation in few mode fiber and highly nonlinear fiber. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jafri, Fatimah (2017) Penggunaan instruksional teknologi maklumat dan komunikasi (TMK) terhadap mata pelajaran teras. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Joshua, Ruth Yohanna (2017) Tiv – Jukun ethnic conflict in Wukari district of Taraba state northeast Nigeria: horizontal inequalities approach. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jajuli, Fatin Afiqah (2017) A comparative evaluation on the performance and emission characteristics of an internal combustion engine using ceramic and metallic catalytic converter. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jiuma Mo, Intisar (2017) The impact of capital market development on economic growth among MENA region countries. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Jamari, Suhailly (2016) Electrokinetic-assisted phytoremediation of heavy metal in riverbank soil. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jofri, Muhamad Hanif (2016) Quality of experience (QOE) aware video attributes determination for mobile streaming using hybrid profiling. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jafar, Nurul 'Ain (2016) A comparative study between PMFSM and HEFSM with iron flux bridges for HEV applications. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jalani, Noor Hisham (2015) Kecekapan pembelajaran berasaskan model contoh-masalah dalam pembelajaran teori litar. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Jamaluddin, Mohd Fakrul Razi (2015) Characteristic studies on types of paint spray for automotive parts in small and medium industry. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jahun, Kabiru Ibrahim (2015) Development of triple band planar inverted-H antenna for DCS, WiMAX and WLAN applications. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jamiran, Mohd Nur Syufaat (2015) Sosioekonomi orang asli jakun di kampung peta. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jalil, Mas Rahayu (2015) Control of spillover processes in catalysis-porous and patterned electrodes. PhD thesis, Newcastle University, United Kingdom.

Jong, Siat Ling (2015) Rain fade dynamic characteristics for ku-band satellite communication systems in Malaysia. PhD thesis, Universiti Teknologi Malaysia.

Jaya, Nasrullah (2015) Evaluation of different dispatching rules in computer integrated manufacturing using design of experiment techniques. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jumaat, Siti Amely (2015) Multi-facts devices installation for loss minimization and techno-economic impact assessment based on computational intelligence technique. PhD thesis, Universiti Teknologi MARA.

Junoh, Suhardi Azliy (2015) Two-wheeled balancing robot controller designed using pid. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jamal, Siti Hairani (2014) Distribution system reliability improvement using distributed generators. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jaber Al-Talqani, Ayad Jasim (2014) Numerical simulation of heat transfer on a circular cylinder by an impinging jet with nanofluid. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jamil, Ansar (2014) A study into prolonging wireless sensor network lifetime during disaster scenarios. PhD thesis, Loughborough University.

Jamali, Qadir Bakhsh (2014) Design and analysis of a hybrid locomotion system for mobile robot. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jamalludin, Mohd Riduan (2014) Enhancement of antifouling properties using rice husk silica particles in polysulfone membrane and optimization of its operating condition. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jalil, Norhafizah (2014) Kecenderungan pelajar cemerlang akademik terhadap pemilihan bidang PTV. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jasman, Kamal (2014) Kesan pembelajaran berasaskan masalah terhadap motivasi pelajar dalam mata pelajaran kemahiran hidup. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jumiran, Mohamad Nurizwan (2014) Kesan teknik “HunTTO SQUARE” terhadap pencapaian pelajar bagi mata pelajaran matematik di sekolah rendah. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jamaludin, Jamaliah (2014) Kesediaan guru kolej vokasional dalam pengajaran amali teknologi elektronik di Negeri Pahang. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jumelan, Juliza Ezaida (2014) Penguasaan kemahiran insaniah pelajar dalam penglibatan aktiviti kokurikulum badan beruniform di UTHM. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jusoh@Mamat, Aizam (2014) Persepsi pelajar terhadap aktiviti origami berkumpulan dalam pembentukan kemahiran kerja berpasukan. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jamin, Nurul Fadzlina (2014) Probabilistic roadmap based path planning for mobile robots. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Janodi, Mohd Razaie (2014) Renewable power source using urine based on bio - battery. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jaini, Nur ‘Afiqah (2014) Transmission losses cost allocation in restructed electricity market environment. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jaini, Norhaslina (2014) Vibration analysis of a beam structure attached with two dynamic vibration absorbers. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jamit, Rexca Anak (2014) An evaluation of aerodynamics performance of a moving car with wind turbine system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Johari, Dahlia (2014) An investigation using RFID in small medium industries (SMI) in Sarawak (kek lapis). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jaafar, Muhammad Nazri (2013) Kemahiran berfikir kritis dalam kalangan pelajar kejuruteraan di Universiti Tun Hussein Onn Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jamaludin, Mohd Nor Aidi (2013) Off grid PICO hydro power generator utilizing household water supply. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jabbar, Mohamad Hairol (2013) ASIC design methodologies for 3D NoC-based 3D heterogenous MPSoC. PhD thesis, Universite de Grenoble.

Jaafar, Lizawati (2013) Automatic room temperature control. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jasni, Nur Akmal Hakim (2013) Cutting performance of advanced multilayer coated (TiAlN/ AlCrN) in machining of AISI D2 hardened steel. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jasni, Nur Akmal Hakim and Lajis, Mohd Amri (2013) Cutting performance of advanced multilayer coated (TiAlN/ AlCrN) in machining of AISI D2 hardened steel. Other thesis, Universiti Tun Hussein Onn Malaysia.

Jailani, Nurul Farhana (2013) Extent of traffic shockwave propagation induced by midblock u-turn facilities. Masters thesis, Universiti Teknologi Malaysia.

Jamaludin, Roslin (2013) GSM remote sensing for transmission line monitoring system using FPGA. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jawaris, Suhaili (2013) Kajian pendekatan instruksional untuk analisis rekabentuk afektif daripada ulasan produk. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Johar, Siti Rohani (2013) Kesedaran teknologi hijau dalam kalangan warga Universiti Tun Hussein Onn Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Johari, Mohammad Daud (2013) Morel dan pengaruhnya terhadap motivasi dan komitmen di kalangan anggota Tentera Darat Malaysia. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Jakuil, Alester G (2013) Multi criteria decision making on load shedding scheme in an islanded system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jamal, Noor Zaihah (2013) Multi-criteria selection for load shedding scheme using analytical hierarchy process (AHP) in electrical power system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jalani , Jamaludin (2013) Robust active compliance control for a robot hand. PhD thesis, University of Bristol.

Jamian, Saifulnizan (2012) Application of functionally graded materials for severe plastic deformation and smart materials ―experimental study and finite element analysis―. PhD thesis, Nagoya Institute of Technology.

Juki, Mohd Irwan (2012) Evaluation of shear capacities, behaviour and effects of variation of CFS strength on proposed innovative shear transfer enhancement, bent-up triangular tab shear transfer (BTTST) for CFS-concrete composite beams. Other thesis, Universiti Tun Hussein Onn Malaysia.

Jamlos, Mohd Effendi (2012) Faktor yang mempengaruhi enrolmen pelajar Aliran Pendidikan Teknik dan Vokasional. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jamaian, Siti Suhana (2012) Homogenization studies for optical sensors based on sculptured thin films. PhD thesis, University of Edinburgh.

Jamian, Nurul Farhana Mazian (2012) Kecenderungan gaya pembelajaran Model Dunn dan Dunn dan Model Honey dan Mumford di kalangan Pelajar Ijazah Sarjana Muda FPTP di UTHM. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jamali , Siti Hasmah (2012) Voltage tracking of DC-DC boost converter using Gaussian Fuzzy Logic Controller. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jamel , Sapi’ee (2012) The hybrid cubes encrypion algorithm (HiSea). PhD thesis, Universiti Tun Hussein Onn Malaysia.

Jacob, Kavikumar and Mamat, Mustafa and Amir Hamzah, Nor Shamsidah and Ahmad, Noor'Aini and Lee, Siaw Chong (2012) An impulsive approach for numerical investigation of hybrid fuzzy differential equations and intuitionistic treatment for fuzzy ordinary and partial differential equations. Other thesis, Universiti Tun Hussein Onn Malaysia.

Jacob, Kavikumar and Khamis, Azme and Md Raji, Abd Wahid (2012) A study on t-best approximation problems in Fuzzy N-Formed Linear Spaces. Other thesis, Universiti Tun Hussein Onn Malaysia.

Junoh , Husin (2011) Faktor keruntuhan akhlak remaja Islam luar bandar di Daerah Kota Tinggi, Johor. PhD thesis, Universiti Malaya.

Jeonmani, Sherinatasha (2011) Programmable velocity profile for wheeled mobile robot. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jaber , Fathi Shaban (2011) Development of a DC-DC buck boost converter using fuzzy logic control. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jamaluddin, Norwati (2011) Behaviour of elliptical concrete-filled steel tube (CFT) columns under axial compression load. PhD thesis, University of Leeds.

Jayapal, Vikneswary (2009) Development of security in wireless sensor network using IPv6. Masters thesis, Universiti Teknologi Malaysia.

Jamil, Ansar (2009) Optimal forwarding routing protocol in w6-based wireless sensor network. Masters thesis, Universiti Teknologi Malaysia.

Jenal, Mahyuzie (2009) Performance characteristics of inverter driven synchronous motor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jalani, Noor Hisham (2008) Position control for linear motion servo system via nominal characteristic trajectory following controller. Masters thesis, Universiti Teknologi Tun Hussein Onn Malaysia.

Jabbar, Mohamad Hairol (2008) BinDCT design and implementation on FPGA with low power architecture. Masters thesis, Liverpool John Moores University.

Jama'on , Juliawati (2007) Perbandingan kemahiran insaniah dalam kalangan pelajar Diploma Kejuruteraan Awam melalui program latihan industri di politeknik. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jamil, Faridah (2007) Penghasilan instrumen psikometrik bagi mengukur tahap penguasaan kemahiran insaniah pelajar. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Johar, Muhammad Akmal (2007) Design and development of a brake system using smart materials. Masters thesis, University of Applied Sciences Ravensburg-Weingarten.

Jelani, Jestin (2006) Forensic study on rural road pavement failures along Parit Sumarto. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Jamellodin, Zalipah (2005) Kegagalan struktur bumbung disebabkan oleh beban angin. Masters thesis, Universiti Teknologi Malaysia.

Joret, Ariffuddin (2005) Sistem pintar pengecaman bentuk agregat berasaskan rangkaian neural. Masters thesis, Universiti Sains Malaysia.

Jalani , Jamaludin (2005) Control strategies for automatic gantry crane system. Masters thesis, International Islamic University Malaysia.

Jalil, Mas Rahayu (2004) Leachate migration path estimations and groundwater quality analysis near a solid waste dumping site at Kampong Kelichap, Batu Pahat. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Jaafar , Azman (2004) Kajian sifat mekanikal papan serpai berlapis mengandungi habuk kayu gergaji. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Jumaat, Siti Amely (2004) Analisis talian penghantaran kuasa sistem DWI-Litar tiga-fasa dan sistem enam-fasa. Masters thesis, Universiti Teknologi Malaysia.

Jufri, Nor Wariza (2004) Keberkesanan kurikulum Kejuruteraan Awam berkaitan alam sekitar dalam pembentukan kesedaran pelajar terhadap alam sekitar:kajian kes di Politeknik Ungku Omar. Masters thesis, Kolej Univcrsiti Teknologi Tun Hussein Onn.

Jamil, Norhayati (2004) Ketrampilan teknikal dan generik pekerja lepasan Sijil Kemahiran Malaysia di industri mampu menjana k-workers mengikut perspektif pengurus industri. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Jaafar, Jusma (2004) Tinjauan gaya pembelajaran pelajar-pelajar pekak di Sekolah Pendidikan Khas Besut, Terengganu: satu kajian kes. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Jamak, Zulkarnain (2003) Penggunaan simulator sebagai penjana kemahiran asas kimpalan di kalangan pelajar kejuruteraan mekanikal. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Jamlus , Suhaida (2003) Indikator pengurusan pejabat cemerlang bagi jabatan perdagangan di Politeknik. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Jaafar, Fareed (2003) Pembelajaran berbantukan komputer berasaskan laman web mata pelajaran penyamanan udara bagi tajuk beban haba. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Jamaludin, Mohd Faizal (2003) Penghasilan manual penyediaan perancangan perniagaan bagi industri kecil dan sederhana:satu kajian di Politeknik Seberang Perai. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Jahuri, Jumaliah (2003) Penghasilan modul pembelajaran CD interaktif bagi mata pelajaran instrumentasi. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Jamian, Yuhani (2003) Latihan mengajar:keberkesanannya terhadap pelajar Diploma Kejuruteraan serta Pendidikan di KUiTTHO (Kolej Universiti Teknologi Tun Hussein Onn) menurut persepsi pelajar. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Jaswadi , Ngatijah (2003) Menyediakan buku panduan keselamatan di makmal teknologi perpaipan, Fakulti Teknologi Kejuruteraan KUiTTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Jamaludin, Khatijah (2003) Penghasilan modul pembelajaran kendiri (MPK) bagi mata pelajaran litar AU untuk pelajar Sijil Teknologi Elektrik, di Kolej Komuniti. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Jaafar, Nur Azureen (2003) Tinjauan tahap pengetahuan pelajar semester satu diploma pengurusan pelancongan mengenai kursus diploma pengurusan pelancongan di Politeknik Johor Bahru. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Juhari, Siti Paridah (2003) Pengaruh faktor minat, keluarga, role model dan jangkaan gaji terhadap pelajar wanita dalam menentukan bidang kejuruteraan sebagai suatu kerjaya masa hadapan. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Jamaludin, Mohd Izal (2003) Pembinaan portal web jarum sebagai mekanisme tambahan dalam pembelajaran senireka fesyen. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Jaafar, Asmah (2003) A survey on the educational tour planning among the students of Diploma in Tourism Management in the Polytechnic. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Jusoh, Suriawati (2002) Kajian ke atas sikap para pelajar terhadap kaedah pembelajaran bermodul menggunakan modul pembelajaran kendiri kartografi. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Jusoh , Ahmad Yusni (2002) Persepsi pelajar terhadap panduan keselamatan makmal kejuruteraan awam KUiTTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Jaffar, Farhah (2001) Tahap kecenderungan calon SPM terhadap program latihan kerjaya di Institut Latihan Kemahiran Awam : satu kajian kes di kalangan pelajar Sekolah Menengah Kebangsaan Dato' Sulaiman, Batu Pahat. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Jusoh, Rus Ayunita (2001) Tekanan kerja di kalangan guru mata pelajaran elektif di sekolah menengah teknik:satu kajian kes. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Jaafar, Mohd Isa (2001) Amalan keselamatan di bengkel kerja kayu Kejuruteraan Awam (sat tinjauan di Politeknik Ungku Omar, Politeknik Port Dickson dan Politeknik Shah Alam. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Jolen, Supian (2001) Tekanan (stress) dan burnout di kalangan pensyarah politeknik. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

K

Khan, Faisal (2017) Design and optimisation of three-phase salient rotor wound field flux switching motor. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Khalid, Siti Nor Azila (2017) Impact strength of woven kenaf fibre reinforced polyester composite plates. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Khyar, Siti Nur Fahdziha (2017) Kerangka bagi mereka bentuk pakej pembelajaran mobile untuk pembelajaran bahasa Inggeris (kemahiran mendengar dan bertutur). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Kamarudin, Nur Hafizah (2017) Processability of waste plastic bag as a novel binder system in metal injection molding. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Kumar, Rajesh (2017) Refinement of outer rotor permanent magnet flux switching machine for downhole application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Kamal Koh, Hasna Heng (2017) Synchronization for different opinions in Malaysia multiracial society: a mathematical exploration study. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Kaliannan, Suaathi (2016) Light solidification of Kuala Perlis dredged marine soil via admixtures of GGBS – cement and sand: 1-D compressibility study. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Khalid, Noor Sakinah (2016) The effect of anatase on rutile TiO2 nanoflowers towards its photo-catalytic activity on cancer cells. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Kotirde, Isa Yuguda (2016) The framework for the school supervision in improving teacher's teaching and learning in Nigerian secondary school educational system. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Kunthi, Herma Dwidayati (2016) The significance of adopting the Islamic calendar in Islamic housing finance. Case study: Bank Muamalat Malaysia Berhad Parit Raja branch. Masters thesis, Universiti Tun Hussein Onn Malaysia.

K. Nagamany, Dharmasegaran (2016) A study of the causes and effects of abandoned residential projects in Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Kamaruddin, Muhamad Khiri (2015) Influence of passenger car air conditioner system thermostat level setting to fuel consumption and thermal comfort. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Kamarudin, Nur Khalidah Khalilah (2015) Modeling job satisfaction among lecturers in Universiti Tun Hussein Onn Malaysia using structural equation modeling. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Kasiman, Abd Rahim (2015) Optimization algorithm of autonomous maze solving robot. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Katiran, Norshidah (2015) Resource allocation in coordinated multipoint long term evolution–advanced networks. PhD thesis, Universiti Teknologi Malaysia.

Kh. Eljugmani, Ahmed Saeed (2015) Development of portable 10 stages marx generator. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Khalifa, Mohamed Saleh (2015) Evaluation performance of ofdm system using the selected mapping technique for wimax technology. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Kassim@Kasim, Noordiana (2015) The development of new step-NC mapping system for step-NC integration. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Kamarudin, Muhammad Asyraf (2015) Relationship between bogie location and the ride performance in a monorail car. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Kamarulzaman, Rabi'atul Adawiyah (2015) Tahap kepuasan penumpang terhadap kualiti perkhidmatan didalam keretapi: kajian kes ETS Ipoh-Sentral Kuala Lumpur. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Khairi, Rihab Salah (2015) Artificial immune system based on real valued negative selection algorithms for anomaly detection. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Kamarudin, Kamarul-azhar (2015) Ballistic ixesponse of aluminium alloy and CFRP panels with pretension. PhD thesis, University of Manchester.

Khamis, Siti Salwa (2015) Effect of hot press forging process on different chip size, pre-compaction cycle, and holding time in direct recycling of aluminium alloy AA6061. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Kamsur, Nadzalinda (2015) Tahap penguasaan, sikap dan minat pelajar Kolej Kemahiran Tinggi MARA terhadap mata pelajaran Bahasa Inggeris. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Kamaruddin, Nor Kamariah and Md. Noor, Haris and Mohd Adi, Mohd Nazir and Arif, Norjariah (2015) Transformational leadership towards encouraging innovative workforce behavior among enterprise so award companies. Other thesis, Universiti Tun Hussein Onn Malaysia.

Kamardan, Muhamad Ghazali (2014) A mathematical model development for the quasi-static lateral collapse of the generalised geometric hollow shapes. PhD thesis, Universiti Pertahanan Nasional Malaysia.

Kamaruzaman, Ahmad Nassaruddin (2014) Reliability evaluation of Sabah transmission and sub-transmission networks. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Kasmin, Ashari (2014) Design for sustainability (D4S) in product development using solidworks software: a case study of redesign a sugar cane extractor machine. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Kiyani, Arslan (2014) Design of reflectarray antenna integrated with FSS textured configurations for wireless communication applications. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Khalid , Amir and Alimin, Ahmad Jais and Mustaffa, Norrizal (2014) Development of constant volume chamber and high injection pressure system for bio-diesel combustion. Other thesis, Universiti Tun Hussein Onn Malaysia.

Khan, Ijaz (2014) Driver’s fatigue detection system based on facial features. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Kamarudin, Harith Azidin (2014) Impak penggunaan multimedia dalam pengajaran topik isometrik terhadap pencapaian dan motivasi pelajar Tingkatan 2. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Kadir @ Shahar, Hazila (2014) Investigating anxiety-related problems in oral presentation among engineering students. Masters thesis, Universiti Teknologi Malaysia.

Kamarulzaman, Nor Fasihah (2014) Kekangan – kekangan pusat latihan kemahiran dalam pengendalian program kemahiran. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Kandar, Ahmad Luthfi (2014) Kemahiran employability dalam kalangan pelajar Kolej Vokasional Kluang Johor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Kasim, Nurulain Nadiah (2014) Study on single buyer model and pool trading model in deregulated electricity market. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Kamardan, Muhamad Ghazali and Dalimin, Mohd Noh and Ahmad Zaidi, Ahmad Mujahid and Miskon, Azizi and Mahamad, Abdul Kadir (2014) A mathematical modelling approach on the characteristic and mechanical parameters of porous cobalt as a scaffold material for optimal bone growth rate. Other thesis, Universiti Tun Hussein Onn Malaysia.

Kasim, Shahreen (2014) A new coputational approach for improving protein domain prediction using hybrid neural network. Other thesis, Universiti Tun Hussein Onn Malaysia.

Kamarudin, Muhammad Saufi (2013) Experimental investigation of cf3i-co2 gas mixtures on the breakdown characteristics in uniform and nonuniform field configurations. PhD thesis, Cardiff University.

Katim, Nurul Izzatul Akma (2013) Asset management decision making of power transformer with insulation agieng knowledge. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Khalid , Siti Nor Azila (2013) Mechanical strength of as-compacted aluminium alloy waste chips. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Kadir, Shalizan (2013) Analytic hierarchy process & topsis method to evaluate load shedding analysis in Ranau Power Station. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Khalid, Khairul Nadiah (2013) Comparative study of micromixers for laminar blood mixing. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Kim Hao , Yeoh (2013) Efficiency improvement of assembly line: case study of bus seat manufacturer. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Kamaruzaman, Ahmad Khairul Radhi (2013) Optimal combined load forecast based on multi-criteria decision making methods. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Kamarudin, Khairu (2013) Parameter optimization for photo polymerization of mask projection micro stereolithography. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Kimpol, Norhanisa (2013) Study of solution towards ground leakage current via inverter switching in different topologies for grid connected PV system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Kamarudin, Mohd Khairul Shazril (2013) Two way power flow in advance distributions and micro grid. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Kimbin , Daniel (2013) A new AHP – based reactive power valuation method. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Kamarudin, Noor Hasliza (2012) Reinforcement of rice husk in ceramic shell mould system for investment casting process. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Katimon, Mohd Nizam and Sohimi, Mohd Noor Syafiq (2012) Evaluation of dry film lubricant using deep drawing test. Other thesis, Universiti Tun Hussein Onn Malaysia.

Kasim, Narimah and Shamsuddin, Alina and Abdullah, Norhazana and Md Noor, Haris and Ramin, Ahmad Kaseri (2012) Exploring a sustainable local workforce supply model for construction industry in Malaysia. Other thesis, Universiti Tun Hussein Onn Malaysia.

Kamro, Maisarah (2012) Kesediaan menceburi kerjaya kejuruteraan binaan dalam kalangan pelajar jurusan binaan bangunan di Sekolah Menengah Vokasional. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Kassim, Noraniah (2012) New technique of producing removable complete denture using rapid tooling approach. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Kok, Boon Ching and Haron, Zainal Alam and Pang, Che Fong and Goh , Hui Hwang and Ponniran, Asmarashid and Eh Kan, Chessda Uttraphan and Ismail, Muhammad Nafis and Chua, Hock Guan (2012) Optimal power dispatch of hybrid PV/diesel systems using heuristic bio-inspired algorithms. Other thesis, Universiti Tun Hussein Onn Malaysia.

Krishnan, Premraj (2012) Pendekatan pembangunan pelan strategi di kalangan universiti-universiti MTUN. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Kassim, Nurul'ain (2012) Tahap kepuasan pelajar antarabangsa terhadap kemudahan dan perkhidmatan yang disediakan di Universiti Tun Hussein Onn Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Khalifa, Tarek M.M (2012) The flight trajectory analysis on the existing aircraft. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Kaprawi, Noraini and Razzaly , Wahid and Md. Yunos, Jailani and Ali, Mahazani (2011) Development of a new empirical based competency profile for Malaysian Technical Vocational Education and Training Instructors. Other thesis, Universiti Tun Hussein Onn Malaysia.

Khaerudini, Deni Shidqi (2011) Development of nanocrystalline iron-chromium alloy by means of sintering and ion implantation for interconnect application in high-temperature solid oxide fuel cells. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Khaerudini, Deni Shidqi (2011) Development of nanocrystalline iron-chromium alloy by means of sintering and ion implantation for interconnect application in high-temperature solid oxide fuel cells. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Kek , Sie Long (2011) Integrated optimal control and parameter estimation algorithms for discrete-time nonlinear stochastic dynamical systems. PhD thesis, Universiti Teknologi Malaysia.

KSM Kader Ibrahim, Babul Salam (2011) Modelling and control of paraplegic’s knee joint (FES-SWINGING). PhD thesis, University of Sheffield.

Kavikumar, Jacob and Mamat, Mustafa and Amir Hamzah, Nor Shamsidah and Ahmad, Noor 'Ani (2011) An impulsive approach for numerical investigation of hybrid fuzzy differential equations and intuitionistic treatment for fuzzy ordinary and partial differential equations. Other thesis, Universiti Tun Hussein Onn Malaysia.

Kamaruddin, Sharul Ashikin (2008) Zinc oxide nanostructures:the effect of deposition parameters on the electrical properties usig sol-gel method. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Kho, Yeh Yiian (2008) Web-based interface system for bedside monitor. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Katimon, Mohd Nizam (2008) Optimisation deep drawing process parameters using FE simulation. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Kasim, Narimah (2008) Improving materials management on construction projects. PhD thesis, Loughborough University.

Kasim, Rozilah (2007) Identifying skills needs for improving the engagement of the communities in the housing market renewal process :a case study of neighbourhood facilities in Northwest England. PhD thesis, University of Salford.

Kian Sek , Tee (2007) A training model of an automated storage and retrieval system (AS/RS) with customized warehouse management system (WMS). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Khalid , Amir (2006) Performance analysis of an air conditioning system using rotary compressor. Masters thesis, Universiti Teknologi Malaysia.

Kamardan, Muhammad Ghazali (2005) Pembaikan sistem kriptografi multi RSA. Masters thesis, Universiti Kebangsaan Malaysia.

Kamaludin, Hazalila (2005) GPRS technology awareness and the interest towards position aware services. Masters thesis, Universiti Teknologi MARA.

Kesot, Mohd Jahaya (2005) QUAL2E simulation of selected pollutant constituents for Semberong River, Batu Pahat, Johor. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Kamdani, Kamaruddin (2005) Influence of preheating on chatter and machinability of titanium alloy-Ti6A14V. Masters thesis, International Islamic University Malaysia.

Kasmani, Ruhaila (2005) A comparison of numerical methods for solving the bratu and bratu-type problems. Masters thesis, Universiti Teknologi Malaysia.

Khamidi , Mohd Faris (2005) Dry-masonry brick house system as an "adaptable building" model for Asian markets. PhD thesis, Kyushu University, Japan.

Kamarudin , Kamarul-Azhar (2004) Air staging combustion and emission from oil burner. Masters thesis, Universiti Teknologi Malaysia.

Katiran, Norshidah (2004) Keseimbangan pautan atas dan pautan bawah dalam sistem WCDMA. Masters thesis, Universiti Kebangsaan Malaysia.

KSM Kader Ibrahim , Babul Salam (2004) Control of a 2 D.O.F direct drive robot arm using integral sliding mode control. Masters thesis, Universiti Teknologi Malaysia.

Khirotdin, Rd. Khairilhijra (2004) Manufacture of cylinders with axial imperfections. Masters thesis, The University of Liverpool.

Kulian@Abd Karim, Ernie (2004) Pembangunan WEBCD makmal geoteknik: ujikaji graviti tentu tanah. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Kahar , Noorfadhilah (2004) Pembangunan CD-ROM interaktif aplikasi Microsoft Excel bagi pelajar Sijil Kejuruteraan Elektrik di Politeknik Shah Alam. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Kodiron, Hadijah (2003) Pembinaan alat bahan bantu mengajar (ABBM) berbantukan komputer bagi mata pelajaran pengurusan perniagaan. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Kevin Akeu, Francisca (2003) Kajian mengenai pembangunan dan penilalan format manual pengajaran dan pembelajaran dalam cd-interaktif bagi pelajar kejuruteraan elektrik di politeknik-politeknik Malaysia. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn .

Kosnan, Noor Mayafaraniza (2003) Kajian terhadap keperluan garis panduan pengendalian makmal automasi : pneumatik,bagi pelajar sarjana muda teknologi kejuruteraan mekanikal, Fakulti Teknologi Kejuruteraan, KUiTTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Khamis, Fakhruddin (2003) Kepentingan portal pendidikan bagi pengajaran dan pembelajaran elektronik di kalangan pelajar sarjana muda kejuruteraan elektrik di KOLEJ UNIVERSITI TEKNOLOGI TUN HUSSEIN ONN (KUiTTHO). Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Khalid, Hasmawi (2003) Kesesuaian modul pembelajaran elektronik matapelajaran teknologi pembuatan perabot (DTC 3202) di kalangan pelajar Diploma Kejuruteraan Awam, KUiTTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Kamdi, Nornajiha (2003) Tahap kepuasan pelajar terhadap perkhidmatan bas di Institut Pengajian Tinngi Awam. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Kamsi, Rozi (2002) Satu sintesis terhadap reka bentuk dokumen kawalan kualiti dalam pengajaran dan pembelajaran di KUiTTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Khalil, Noor Azalina (2002) Kesediaan pelajar diploma kejuruteraan awam di politeknik sebelum menjalani latihan industri. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Kosnin@Sarkon, Mohd Khaspi (2002) Keperluan bidang-bidang kemahiran di sektor perindustrian masa kini: satu tinjauan. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Kamarudin, Mardziah (2002) Tinjauan terhadap tahap kesedaran keselamatan pekerja binaan dan kontraktor menurut persepsi pelajar semester v dan vi Diploma Kejuruteraan Awam Politeknik Ungku Omar, Ipoh yang menjalani latihan industri di tapak bina. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Kang, Sian Lee (2002) A study on the application of Nicenet for learning. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Kamarulzaman, Kartini (2001) Tinjauan mengenai keperluan latihan industri dalam program latihan pensyarah politeknik: satu kajian kes di kalangan graduan Sarjana Pendidikan (Teknikal)di Kolej Universiti Teknologi Tun Hussein Onn, Batu Pahat. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Kandari, Mohd Azamri (2001) Perlaksanaan mata pelajaran pendidikan teknik dan vokasional di peringkat sekolah menengah kebangsaan: satu tinjauan di daerah Batu Pahat. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Khalid, Kamarudin (1996) Sistem penilaian kemahiran Kejuruteraan Awam anjuran Majlis Latihan Vokasional Kebangsaan. Masters thesis, Universiti Teknologi Malaysia.

L

Lee, Woon Kiow (2017) Detection of chipping in ceramic cutting inserts from workplace profile signature during turning process using machine vision. PhD thesis, Universiti Sains Malaysia.

Leong, Wai Yean (2017) Development of an electronic aerosol atomisation system for generating three-dimensional (3D) cells in microencapsulations and microtissues characterisation. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Lim, Hui Teng (2017) Fabrication and characterization of copper oxide thin film by thermal CVD for ethanol sensor application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ling, Chin Wan (2017) Harmonic reduction of a single-phase multilevel inverter using genetic algorithm and particle swarm optimization. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Lagiman, Syahidah (2017) Improvement of relationship between main contractor and subcontractor for successful construction project implementation. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Luis Hii, Anneza (2017) Influence of Enterococcus faecalis and Bacillus sp with added calcium lactate on engineering concrete properties and enhancement of self healing in concrete under unsterillized condition. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Lee, Guang Beng (2017) Sustainable product development based on axiomatic design principles. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Lau, Wei Khang (2016) A dual-watermarking with QR code against cropping and resizing attack. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Lambosi, Latip (2016) Effects of premixing injector configuration and biodiesel blends on spray and flame characteristic in a combustion burner. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Lee, Te Chuan (2016) In vitro bioactivities of anodised titanium in mixture of β-glycerophosphate and calcium acetate for biomedical application. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Lee, Chin Sheng (2016) Outqual instrument for measuring expectation gap of outsourcing service quality in property maintenance and management. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Laily, Suraya (2016) Performance evaluation of copper and graphite electrode in electrical discharge machine (EDM) of aluminium alloy LM6. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ling , Felix Ngee Leh (2016) Physico-chemical and microstructure of artificial soils stabilised with lime-zeolite. PhD thesis, Universiti Teknologi Malaysia.

Lim, Hui Chin (2016) Quality management practices of food manufacturers: a comparative study between small, medium and large companies in Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ling, How Hua (2016) A comparison study on the carbon footprint between the proposed Kuala Lumpur - Singapore High Speed Rail and other transportation modes. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Lim, Wendy Wen Xin (2015) Social care facilities management audit at the residential care home for the elderly in Malaysia: a case study of Rumah Seri Kenangan. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Liwan, Siti Radziah (2015) The framework of improving on-site materials tracking for inventory management process in construction projects. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Lias, Jalil (2015) Analysis of red blood cell (RBC) classification using Ni vision builder Ai. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Lim, Sin Mei (2015) Effects of differently stabilised lateritic soils on its geotechnical properties and dust generations. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Lim, Huey Sia (2015) Fabrication of frequency selective structure and evaluation of microwave transmission on energy saving glass. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Liew Abdullah, Nurul Hidayah (2015) Kajian pemboleh-pemboleh ubah yang mempengaruhi aras pengetahuan, tindakan dan kesedaran murid sekolah rendah di Johor terhadap isu alam sekitar. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Latif, Kamran (2015) New technique for the development of open CNC cell controller based on ISO 14649 and ISO 6983. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Lee, Yen Fong (2015) Vibration behaviour of Malaysian rubberwood lvl-concrete composite floor system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Lashari, Tahira Anwar (2015) The effect of integrated affective-cognitive teaching and learning approach on student’s learning in engineering education. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Leong, Boon Soon (2014) Biodiesel processing using ultrasound clamp on tubular reactor for palm oil. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Lim , Alvin John Meng Sung (2014) Development of a new sand particle clustering method with respect to its static and dynamic morphological and structural characteristics. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Lim , Yee Kai (2014) Microstructure and mechanical properties of dissimiliar aluminum alloy/stainless steel joints prepared by friction stir spot welding (FSSW). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Lau, Ong Yee (2014) Preliminary design of new concept compact continuously variable transmission. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Liau, Agnes Siau Wei (2014) Stability assessment of 132kV Sabah grid-connected solar PV system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Lee, Mao Rui (2013) Treatment of landfill leachate in coagulation-flocculation method by using micro zeolite and micro sand. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ling, Chak Ung (2012) Analytical hierarchy approach for load shedding scheme of an islanded power system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Lorothy Morrison Buah, Lorothy Morrison Buah (2012) Supervisory control for conventional unitary air conditioning system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Libau , Charles Muling (2012) Transient response analysis for DC-DC boost converter. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Leman, Abdul Mutalib (2011) Development of industrial air pollution monitoring system for safety and health enhancement and sustainable work environment in small and medium industries (SMI's). PhD thesis, Universiti Teknologi MARA.

Lias, Jais (2011) Study on application of UV-processed molecular alignment in liquid crystal devices. PhD thesis, Nagaoka University of Technology.

Lai, Lenny Mei Lan (2008) Pengaruh motivasi dalam kreativiti pelajar kejuruteraan UTHM. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Loke, Choy Yean (2008) Skill standards for biotechnology graduates in Malaysia : an industrial perspective. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Low, Weng Choon (2007) Pengaruh latar belakang data demografi pensyarah politeknik terhadap kepatuhan kod etika profesion keguruan. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Lim, Yeong Chyng (2007) Hubungan antara penyeliaan pengajaran, kesediaan mengajar dan profesionalisme guru di kalangan guru teknikal. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Lim, Soon Chong Johnson (2003) Penghasilan modul pembelajaran interaktif bagi pengautomatan industri. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Lai, Chee Sern (2003) Pembangunan dan penilaian e-modul interaktif cakera padat bagi mata pelajaran kejuruteraan pengeluaran. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Liman, Siti Juliana (2003) Pembangunan CD ROM interaktif bagi mata pelajaran Fisiologi Perubatan di KUiTTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Libau, Charles Muling (2002) Meneliti perlaksanaan amalan keselamatan di bengkel pendawaian elektrik di Politeknik Kuching, Sarawak. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Lim , Boon Ping (2002) Mengenalpasti masalah dalam pembelajaran amali PLC (Programmable Logic Controller) di KUiTTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Lian, Ai Chen (2002) Merekabentuk, menilai kesesuaian dan mengkaji keberkesanan modul pengajaran kendiri (MPK). Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

M

Mohamed, Mohamed Osman (2018) Bandwidth enhancement of spiral antenna with defected ground structure. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamed Abdi, Abdinasir (2018) Development of wideband phased array antenna. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd, Ezri (2018) Exploring Moore space-filling geometry for compact filter realization. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamed, Omar Abdi (2018) Low level CBIR for palm oil FFB prediction using neural network. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mansir, Dodo (2017) A disaster risk assessment model for the conservation of cultural heritage sites in Melaka. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mat Ali @ Yunus, Zalilah Murni (2017) Acid impregnated honeydew rind activated carbon for chromium and zinc removal. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Amin, Azriszul (2017) Application of restaurant waste lipids (RWL) as a binder component in metal injection moulding. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Mutalib, Wan Fatin Liyana (2017) Assessment of carotid arterial wall movement from offline B-mode ultrasound image for early detection of atherosclerosis. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Salim, Nurul Syamimi (2017) Characterization of thermoset biopolymer in thermoplastic of low and high density polyethylene upon UV irradiation. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Muhd Suberi, Anis Azwani (2017) Computer aided system for dendritic cells detection and counting. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Yusoff, Nurrul Rahmah (2017) Continuous biodiesel process using ultrasonic in-line reactor for jatropha curcas oil (JCO). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Salleh, Anuar (2017) Design and development of ocean monitoring system based on GPS. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Mohsen Ali, Bassam Hasan (2017) Design and development of portable home based rehabilitation device. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Jais, Farhana Hazwanee (2017) Determination of processing parameters of photostability for polyvinyl chloride rice husk composites. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamad, Fadzilah (2017) Developing a guideline for an integrated quality, environmental, occupational health and safety, and energy management system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Md Sai‘aan, Nurul Hamizah (2017) Development of a micro-extruder with vibration mode for microencapsulation of human keratinocytes in calcium alginate. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohammed, Abdulhakim Abdullah Al-Ezzi (2017) Development of telemedicine system for remote biomedical operation. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Rabani, Nur Amira (2017) Effects of corrosion and wear on cermet based coatings. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Noh, Nur Hanifah (2017) Employability of local trained skill labour in construction industry. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohammed El Bireki , Majdi Farag (2017) Enhanced image watermarking techniques with contour compression methods. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Napi, Muhammad Luqman (2017) Fabrication and characterization of nanostructured fluorine doped tin oxide thin film for DSSC by hydrothermal method. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohammad Mokhtar, Salina (2017) Fabrication of titanium dioxide nanorods array for ultraviolet sensor application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamad Fazli, Fatin Izyani (2017) Fabrication of titanium dioxide thin film prepared by spray pyrolysis deposition method for dye-sensitized solar cell. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Muniandy, Nagentrau (2017) Formulating the plastic deformation expression on coated substrate as a coating selection tool. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mahadi, Lina Farhana (2017) Fuzzy expert system on diagnosis atherosclerosis. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mustafa, Mohd Syafiq Syazwan (2017) Humidity control in different building applications; restaurant and operation theatre. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Md Taujuddin, Nik Shahidah Afifi (2017) Improved thresholding and quantization techniques for image compression. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Mohamed Anuar, Rabiatul Adawiyah (2017) Interfacial reaction between SAC305 and SAC405 lead-free solders and electroless nickel/immersion silver (ENImAg) surface finish. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mildad Zaltum, Mohamed Ahmed (2017) Investigation on HeLa cells behaviour induced with pulse electric field for wound healing application. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Masri, Muhammad Zakhwan (2017) Investigation on air + CO2 gas mixtures under lightning impulse. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mansor, Marlini (2017) Keberkesanan penggunaan EDUBASE dalam kalangan pelajar teknikal yang berbeza gaya kognitif, afektif dan psikomotor di politeknik Malaysia. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Maskur, Said (2017) Kerangka pentaksiran pendidikan karakter untuk mata pelajaran sains sekolah menengah di Kota Batam. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Mohamad Hamim, Mohd Akmal Firdaus (2017) Kompetensi guru reka cipta dalam bidang elektrik di sekolah menengah harian di Johor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamad, Radiah (2017) Magnetohydrodynamic boundary layer flow in a nanofluid with various stream conditions. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Ma'at, Norzarina (2017) Modeling dynamic behaviour including shockwave propagation and spall failure in orthotropic materials. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Saleh, Siti Juita Mastura (2017) Modelling and analysis of thin-walled structures for optimal design of composite wing. PhD thesis, Cranfield University.

Mohd @ Mohd Nor, Syarul Hakimi (2017) Optimizations and recycling industrial waste (palm oil fly ash) as a pigment in coating technology. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Muhammad Said, Khaeruddin (2017) Pembangunan guru melalui latihan kurikulum 2013 di Kementerian Agama Provinsi Kepulauan Riau. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Mustafha, Anuar (2017) Penerimaan warga emas terhadap aplikasi teknologi dalam penyampaian dakwah bertalaqi di daerah Batu Pahat. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamad Salleh, Fatin Nabilah (2017) Performance of four-stage cascaded fiber optical parametric amplifier (FOPA) using Optisystem. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Md Salleh, Md Zakir (2017) Potensi penggunaan baja Organoseep terhadap prestasi pertumbuhan, produktiviti dan pengurusan penanaman pokok tomato (Solanum lycopersicum). PhD thesis, Universiti Tun Hussein Onn Malaysia.

Mahammed Rafter, Murni Faridah (2017) Processing of porous 316L stainless steel (SS316L) foams using compaction method for different space holders and different sintering environment. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Suhaimi, Nurul Syahada (2017) Standard guru Malaysia dalam program persediaan guru reka bentuk dan teknologi. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamad Jamil, Ahmad Syakir (2017) Study of kitchen hood water mist system for cooking emission (UL1046) filtration with low pressure deflected nozzle. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mat Harun, Noor Hafizzatul 'Izzah (2017) Vein mechanism assessment in underweight, normal weight, overweight and pregnant subjects for risk factor of deep vein thrombosis (DVT). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Noh, Hamidun (2017) An analytical study on the residual strength of RC structures with degradation damage. PhD thesis, Kyushu University.

Mahgoub Elsayed, Mazen Hashim (2017) A computational tool for microstrip planar filter design. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Noor, Ahmad Fuad (2017) A correlation between whole body vibration and low back pain on lorry drivers. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Muhammad Zain, Ruminah (2017) The development of an assessment framework for vocational education training programmes in the NOSS Based Training System (NBTS) and the National Dual Training System (NDTS). PhD thesis, Universiti Tun Hussein Onn Malaysia.

Md Yusoff, Hannaffie (2017) The effect of liquidity and solvency on profitability: the case of public-listed consumer product companies in Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohammed, Hadi (2017) The effects of vocational training and other correctional programmes on the reformation, rehabilitation and reintegration of offenders in Nigerian Correctional Institutions. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Arif, Muhammad Farhan (2017) A study on ridership capacity analysis at Rapid Kelana Jaya Line Station. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Meftah, Khaled Alhadi (2016) A comparison of CK and martin’s package metric suites in predicting package reusability in open source object-oriented software. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Md Yazid, Nur Atiqah (2016) Amalan pembelajaran teradun pensyarah di Politeknik Sultan Salahuddin Abdul Aziz Shah. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Malayandy, Sathiya Vaani (2016) Analysis of land use type pattern and light rail transit (LRT) ridership. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Marwah, Omar Mohd Faizan (2016) Analysis of various rapid prototyping techniques for investment casting. PhD thesis, Universiti Teknologi Malaysia.

Mohd Noh , Faridah Hanim (2016) Application of advanced signal processing technique for power quality disturbances detection and classification system. PhD thesis, Kumamoto University.

Mohd Thahrir, Muhamad Hafizi (2016) Attibutes of green building rating tool (GBRT) for Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mazlan, Muhammad Hazli (2016) Biomechanical analysis of osteoporotic spines with diseases using CT-based finite element method. PhD thesis, Kyushu University, Japan.

Md Mustam, Saizalmursidi (2016) Channel modeling of multilayer diffusion-based molecular nano communication system. PhD thesis, Universiti Teknologi Malaysia.

Mat Hassan, Nik Normunira (2016) Characteristic of renewable polymer incorporated with stabilizer to characterize the endurance of ultra voilet irradiation exposure. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Isa, Murniza (2016) Comparison of concentrating photovoltaic (CPV) configuration for photovoltaic (PV) application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Md Nor, Danial (2016) Content-based indexing of low resolution documents. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Mat Radzuan, Indera Syahrul (2016) Cultural heritage incentives for the conservation of traditional settlements: the case of Malaysia, Japan and South Korea. PhD thesis, Universiti Malaya.

M. Romalan, Gadafi (2016) Design and development of a small scale 12S-14P outer rotor HEFSM. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Md Salih, Nurulazirah (2016) Design and development of coliform bacteria detection system integrated with microfluidic and optical absorbance measurement device. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mazlan, Mohamed Mubin Aizat (2016) Design optimization of single-phase inner-rotor and outer-rotor hybrid excitation flux switching machine for EV applications. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Yusof, Maryam Jameelah (2016) Design, fabrication and measurement dual band microstrip bandpass filter using landa/4 short circuit stub intergrated with defected microstrip structure (DMS). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mad Said, Mohd Jazlan (2016) Determination of shear wave velocity and shear modulus estimation of peat soil using seismic geophysical method. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Masdar, Aizan (2016) Development of a wireless current controlled stimulator for individuals with spinal cord injury. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohammed Aldebry, Mohammed Al Sanosi (2016) Development of web application package to design AC substation grounding system based on IEEE Std. 80-2000 for continuous education and professional training. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mat Nawi, Abdullah (2016) Effect of waste plaster of paris on physical and mechanical properties of ceramic pottery body. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Rose, Ahmad Nazari (2016) Efficient hybrid reduction for binary based information system in soft set theory. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Mohammed, Aawag Mohsen (2016) Enhancing skill worker requirements in improving implementation of IBS in construction projects. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Majeed, Uzair (2016) Fabrication and characterization of silicon nitride thin film planar waveguides produced by RF magnetron sputtering technique. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Mohamad Zawahid, Sakinah (2016) Fabrication of carbon brush by using palm oil shell for railway application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Musa, Suhaili (2016) Food chain model with competition interaction in an environment of a biotic resource. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mahdi Al-Temeeme, Raed Hameed (2016) Forecasting CPO price using ARIMA, ARCH and GARCH models. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohmad Hassim, Yana Mazwin (2016) Functional link neural network with modified bee-firefly learning algorithm for classification task. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Mohamud Arab, Abdifatah (2016) Fundamental study and optimization of outer-rotor hybrid excitation flux switching generator for grid connected wind turbine applications. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Masduki, Masadliahani (2016) Hubungan emosi malu dan penglibatan murid prasekolah dalam pengajaran dan pembelajaran kemahiran asas. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Musa, Usman (2016) Impact of housing attributes on rental values of residential properties in Minna, Nigeria. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Dlan, Najihah (2016) Impact of neighbourhood facilities towards locational decision and residential property value. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Effendi, Hana Nabila (2016) Improvement on SPOC+ test program with ambient test removal. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Muhammad, Jibril Adamu (2016) Improving selection practices of subcontractors on building construction project in Nigeria. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamad, Zaleha (2016) Intelligent signal processing system to investigate damage severity in kenaf fibre composite. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Mohamed Azri, Nafhatun Amirrah (2016) Kajian ke atas kualiti udara dalaman koc tren bagi perkhidmatan monorel dan komuter. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Sofberi, Nurul Atiqah (2016) Kepuasan penghuni terhadap projek perumahan terbengkalai oleh kontraktor penyelamat kajian kes : Taman Perindustrian Hijau, Rawang. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd. Nordin, Noorhidayu (2016) Kesan pengintegrasian origami dalam pengajaran dan pembelajaran geometri di KKTM Sri Gading. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Yusof, Mohd Fahmi (2016) Kesediaan guru sekolah menengah mengamalkan pengajaran abad ke-21. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohammed, Ahmed Hasan (2016) MHD effects on forced-convection stagnation nanofluid flow over a stretched surface in the presence of heat source/sink using similarity transformation. Masters thesis, Universiti Tun Hussein Onn Malaysia.

M Katy, Abdoasslam Hatab (2016) Measuring usability for application software using the Quim model. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohammed Hasheem, Yusoof (2016) Mobile forensic triage for damaged phones using M_Triage. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Shah, Shaharil (2016) Nonlinear characterisation of reconfigurable antennas. PhD thesis, University of Birmingham, United Kingdom.

Makzin, Norfadzilah (2016) Pelaksanaan pembelajaran melalui Curriculum Information Document Online System (CIDOS) dalam memperkasakan pengajaran pensyarah di politeknik. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Nassir, Siti Nor Idayu (2016) Pelaksanaan program transisi kerjaya (PTK) murid berkeperluan pendidikan khas (MBPK) masalah pembelajaran (MP). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Muhamad Hanafi , Nurfirdawati (2016) Pembangunan dan penentusahan rubrik pentaksiran prestasi bagi mentaksir projek reka bentuk seni bina di politeknik Malaysia. PhD thesis, Universiti Pendidikan Sultan Idris.

Md Taib, Faridah (2016) Penglibatan wanita yang mengikuti Technical Vocational Education and Training (TVET) dalam industri Oil & Gas. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Bohari, Normila (2016) Persepsi industri hospitaliti terhadap graduan kurang upaya (OKU) bermasalah pendengaran. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Md Dan @ Azlan, Mohd Firdaus (2016) Physical classifications and engineering characteristics of in situ boulders in tropically weathered granite. PhD thesis, Universiti Teknologi Malaysia.

Mohamad, Salasiah (2016) Potensi dan promosi pelancongan fito di Taman Negara Johor Endau Rompin, Johor, Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mat Nawi, Nur Farhana (2016) Ramalan prestasi kerja pelajar berdasarkan AQ dan minat kerjaya. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Shaari, Mohd Syahmi (2016) Reducing magnetic flux leakage of linear induction motor by chamfering method. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Muhammad Zin, Nooradzianie (2016) Speed control of permanent magnet synchronous motor using artificial neural network. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mat Daud, Nur Falilah (2016) Treatment of chicken processing wastewater using hybrid upflow anaerobic sludge blanket (HUASB) coupled with aerated lagoon (AL). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Md Ariffin, Latifah (2016) Two step Runge-Kutta-Nyström method for solving second-order ordinary differential equations. PhD thesis, Universiti Putra Malaysia.

Mohamed Salleh, Mohammad (2016) Vibration control of thin plate structure with attached dynamic vibration absorbers. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamed Yusop, Fatimah (2016) The development of Euler solver based code for external aerodynamics flow. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Moh. Azzoubi, Einas Almarghni (2016) An enhancement of image filtering for fingerprint recognition. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Md Fadzil, Salehuddin (2016) The relationship of potential hazards towards safety impact at Malaysian floating storage facility. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamud Shire, Abdirahman (2015) Archimedean spiral antenna embedded with frequency selective surface for wideband applications. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Md Amin, Noor Dina (2015) The impact of indoor comfort on students’ experiential learning in engineering education laboratories. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Mansur, Sity Aishah (2015) Extrapancreatic actions of incretin-based therapies on bone in diabetes mellitus. PhD thesis, Ulster University.

Mohd Safian, Edie Ezwan (2015) Building and locational characteristics' quality of purpose-built offices in Malaysia and their relationship with rentals. PhD thesis, Universiti Teknologi MARA.

Mohd, Suzila (2015) Building information modelling (BIM) implementation model for construction project design stage. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mayzan, Mohd Zul Hilmi (2015) Graphite immobilisation in glass composite materials. PhD thesis, The University of Sheffield.

Mohamed Hassan, Mohamud (2015) Quality of services (QoS) analysis framework for Text To Speech (TTS) services. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Shariff, Sha-Sha Shelyna (2015) Real time air quality reporting system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohammad Azmi, Mohamad Azim (2015) Stabilization/solidification of lead contaminated soil using cement incorporated with sugarcane bagasse. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mustaffa, Fatimah (2015) Konstruk amalan pengurusan risiko sukan ke arah penghasilan kerangka konsep APRS Jurulatih Sukan Institut Pendidikan Guru Malaysia. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Mohammad Faudzi, Nurazrina (2015) Morse code security system via visible light communication using MATLAB. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Ali, Ahmad Zurisman (2015) Performance of geopolymer concrete in fire. PhD thesis, Swinburne University of Technology.

Mohamed, Juliana (2015) An improved strategy to support multiple qos assessment for selecting content adaptation services. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Noor, Nazihah (2015) Analysis of vortex shedding in a various body shapes. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Md Hasan, Sazali (2015) Cfd simulation of the dynamic flow behavior in a bubble column reactor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Azali, Noor Nadiah (2015) Classification of eeg signals for human computer interface (hci) application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohammed Albishti, Abobaker A (2015) Dual band dipole antenna with harmonic suppression capability. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mudin, Azim Isha (2015) Emission characteristic of small diesel engine fuelled by preheat biodiesel. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mat Ripin, Mohd Khairi Haslamia (2015) Modelling and simulation of train schedule and operation. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Md Teni, Muhammad Hafizzuddin (2015) Pattern recognition for manufacturing process variation using ensembled artificial neural network. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Malik Fesal, Siti Natasha (2015) Simulation of vortex induced vibration of a bluff body structure. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamed Elbishti, Entsar Kouni Alhaj (2015) The degree of JIT in mineral oil and asphalt industries in Libya. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohammed Ghawbar, Fayad Mohammed (2015) The influnence of transmission range on the performance of vehicular AD-HOC network (VANET). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Md Janis, Mohd Azim (2015) A study of multiple cracks on dynamic characteristic and stress intensity factor in cantilever beams. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Musa, Rabiahtuladawiah (2015) Automatic red blood cell counting based on particle area. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mior Idris, Wan Nur Amalina (2015) Characterization of nanostructures ZnO synthesized through hydrothermal method. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Musbahi, Amal Mustafa (2015) Comparative evaluation of various GPS-free localization algorithm for wireless sensor networks. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamed, Mohamed Asghaiyer (2015) Design of shunt active power filter to mitigate the harmonics caused by nonlinear loads. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mokhtar, Mohd Shukri (2015) Design optimization for the two-stage bivariate pattern recognition scheme. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mat Jamil, Khamelrun Shah (2015) Development of portable solar generator. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamed Alhabeib, Ahmed Othman (2015) Experimental investigation of Co2 gas in the breakdown characteristics under lightning impulse. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Muhamad, Arif Abidin (2015) Improving PID controller of motor shaft angular position by using genetic algorithm. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Sohaimi, Nurul Adlihisam (2015) Integration of control chart and pattern recognizer for bivariate quality control. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohammed Saleem, Radhwan (2015) Recommended protection scheme setting coordination for nine busbars transmission grid. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamad Redzuan, Nurul Adila (2015) Synthesis of molten salt as heat transfer fluid for waste heat recovery application. Masters thesis, UniversitiTun Hussein Onn Malaysia.

Mohd Tadza, Noor Zahrinah (2015) Energy efficient design of an adaptive switching algorithm for the iterative-MIMO receiver. PhD thesis, University of Edinburg.

Mat Jubadi, Warsuzarina (2015) Modelling of advanced submicron Gate InGaAs/InAlAs pHEMTS and RTD devices for very high frequency applications. PhD thesis, University of Manchester.

Mohd Noor, Farhanah (2015) Gaya kepimpinan di kalangan usahawan PKS yang berasaskan teknologi. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Noor, Farhanah (2015) Gaya kepimpinan di kalangan usahawan PKS yang berasaskan teknologi. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Yusoff, Siti Aimi Nadia (2015) Soil stabilization using lignin and bio-enzymes. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamad Shari, Mohd Hafiz (2015) Development of one cycle current controller using raspberry pi for 3 phase active power filter for nonlinear load improvement. Masters thesis, Universiti Tun Hussien Onn Malaysia.

Mahazan, Siti Mariam (2015) Development of pigment for paint using nickel ferrite for EMI application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mamat, Ibrahim (2015) Development of three phase back to back converter with current flow control using raspberry PI microcontroller. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Moktarudin, Muhamad Nur Hafiz (2015) Development of three phase back to back converter with output voltage control using raspberry pi microcontroller. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Asharuddin, Syazwani (2015) Optimization of biosorption process using cucumis melo rind for the removal of Fe, Mn and Pb ions from groundwater. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mat Zain, Mohd Kamal (2015) Performance investigation OF 6s-4P, 6s-5P, 6s-7P and 6s-8P HEFSM. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Jamail, Nor Akmal (2015) Polarization and depolarization current of linear low density polyethylene-natural rubber nanocomposite subjected to electrical tracking and moisture. PhD thesis, Universiti Teknologi Malaysia.

Mohd Noh, Mohd Firdaus (2015) Vibroacoustic modelling of enclosure coupled to a flexible wall with attached spring-mass-damper system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Salleh, Norzarira (2015) An-ahp based load shedding algorithm to mitigate power system blackout. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mumin Warfaa, Abdul Rashid Omar (2015) Analysis of three different dielectric substrates on square ring slot microstrip patch antenna for wireless application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohammad Tamin, Adi Hizami (2015) Assessment of vibration minimization strategies for construction work in railway protection zone. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamed Suhami, N Md Hafizul Hasmie (2015) Development of control system for a two wheeled self-balancing transporter. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Samsudin, Mohd Safit (2015) Development of cost effective PLC training kit by using arduino platform (PLCDUINO). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamad Tahir, Abdul Fattah (2015) Experimental evaluation of Co2 laser cutting quality of ultra high strength steel (UHSS) using nitrogen as an assisted gas. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Atan, Mohd Nazrul Ikram (2015) Experimental investigation on ethanol-petrol blends operating with a petrol engine. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Esa, Mohd Hanafi (2015) Fast transient simulation of schmidt surge arrester model n a transmission line using atp. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mat Jusoh, Noor Aslamiah (2015) Finite element analysis of a beam structure attached with tuned vibration absorbers. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Nasir, Siti Nasuha (2015) Flow shop scheduling using dual – bottleneck approach. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Na’im, Imsaaiha (2015) Noise la,max statistical linear prediction model for ampang line light rail transit (lrt) at residential area along cempaka station. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohammed Ahmed, Adeb Ali (2015) OFDM system cyclic prefix characteristic analysis for WIMAX Technology. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Noor, Nor ‘Izzati (2015) Performance of multichannel fiber optic parametric apmlifier. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamad Ibrahim, Muhammad Muhyiddin (2015) Smartphone based robot controller for teleoperated system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Imran, Mohd Khairi (2015) Sound insulation and vibration reduction of modified zinc roof using natural fiber ( arenga pinnata ). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Bakri, Noor Ainita (2015) Tahap kepuasan pelanggan terhadap kualiti perkhidmatan di stesen keretapi : kajian kes di Stesen Keretapi Ipoh, Perak. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohammad Zain, Fharidatun (2015) Waypoint following indoor robot. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Masjud, Hidayatullah (2015) The analysis of indoor air quality inside the Kelana Jaya light rail transit train in Kuala Lumpur. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohammed Alduais, Nayef Abdulwahab (2015) The performance evaluation of different logical topologies and their respective protocols for wireless sensor networks. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mansur, Syahira (2015) Aliran olakan lapisan sempadan nanobendalir melalui permukaan rata dan mengufuk dengan pelbagai syarat sempadan. PhD thesis, Universiti Kebangsaan Malaysia.

Mohammed Al-Ashwal, Wadhah Abdo (2015) Compact planar wearable ultra wideband antenna for onbody applications. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Muhamad, Zainab Hassan (2015) Comparative analysis for performance measurements of software testing between mobile applications and web applications. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Murli, Norhanifah (2015) Development of a new computational model for mapping, learning and mining of 3D spatio-temporal fMRI data. PhD thesis, Auckland University of Technology.

Mehda, Ayoub (2015) Development of p-resonant controller for z-source three phase inverter. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Rus, Shaiqah (2015) Effects of ultra violet irradiation on waste biopolymer based on vibration characterisation, mechanical and physical properties. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Noor, Siti Noor Fazelah (2015) Empowering the powerful: a critical discourse analysis of public discourse on graduate employability. PhD thesis, Macquarie University, Australia.

Muhamad, Yusof (2015) Fast transient simulation of pinceti surge arrester model on a transmission line using atp software. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Pauzi, Nur Fazlinda (2015) Flowshop scheduling using artificial bee colony (ABC) algorithm with varying onlooker bees approaches. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Md Ariffin, Khadijah (2015) Framework for the audit process implementation on public buildings. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Muhammad, Maryam Salihu (2015) Framework of the existing patterns of residential segregation and housing quality in Nigeria. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Sam, Siti Aminah (2015) Kajian amalan budaya orang asli Suku Kaum Jakun di Kampung Peta. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Makhtar, Muhamad Azmi (2015) Kajian motivasi terhadap pelajar kolej vokasional dalam melaksanakan kerja-kerja kemahiran teknikal. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamad Salih, Mohamad Adib (2015) Kajian pembinaan laman web dakwah untuk tekno daie : analisis terhadap model penilaian laman web dakwah di Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Md.Jizat, Nor Atikah (2015) Kompetensi pembimbing syarikat bertauliah Sistem Latihan Dual Nasional (SLDN). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Muhamad Hanafi, Nur Fatihah (2015) Landfill leachate treatment by combination of electro - fenton and sequencing batch reactor method. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Ariffin, Ahmad Azrizal (2015) Pattern recognition for manufacturing process variation using integrated statistical process control – artificial neural network. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Zaidin, Norazri (2015) Penerapan nilai-nilai murni dalam proses pengajaran dan pembelajaran ke arah pembentukan sahsiah pelajar di Kolej Kemahiran Tinggi MARA. Masters thesis, Universiti Tun Hussein Onn Malaysia.

M. Amin, Sri Yulis (2015) Pengacuan suntikan karbida tungsten tersimen dengan sistem bahan pengikat berasaskan stearin sawit. PhD thesis, Universiti Kebangsaan Malaysia.

Mohid, Siti Rahmah (2015) Photodegradation of biopolymer doped with titanium dioxide (TiO2) as ultraviolet (UV) stabilizer. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamad, Habib Musa (2015) Post cyclic behaviour of Malaysian peat soil. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Masek, Alias (2015) Potensi peningkatan tahap pendidikan, kemahiran dan produktiviti komuniti belia luar bandar (rural youth) yang tidak menyambung pengajian. Other thesis, Universiti Tun Hussein Onn Malaysia.

M. Yusup, Eliza (2015) Production of temporary bone scaffold reinforced with OPEFB-CMC from oil palm empty fruit bunch. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Md Akhir, Nor Solehah (2015) Risk level of factors causing construction waste generation throughout construction project life cycle. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohammed Kabir, Kaigama (2015) Safety compliance for high rise projects in Nigerian construction industry. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mansor, Siti Hajar (2015) Study on the shear stress-strain behaviour of peat using direct simple shear test and direct shear box test. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohammed Lame, Sulaiman (2015) An examination on entrepreneurial competencies between lecturers of higher learning institutions in Malaysia and Nigeria. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Musba, Fadia Abdalla (2015) The relationships between nurse care, attitude of patient and nurse with cancer patient satisfaction. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd, Mohd Norzali (2015) A research on facial visual-infrared stereo vision fusion measurement for internal state estimation. PhD thesis, Kagoshirna University, Japan.

Mohamud Hassan, Abdullahi (2015) A robust digital image watermarking using repetition codes against common attacks. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohammed Hayder, Ali (2014) Numerical study of jet impingement cooling on a smooth curve surface. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Aripin, Ashuvila (2014) Potential of non-wood fibres for pulp and paper-based industries. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Majid, Mariam (2014) Study of artificial neural network scheme application in manufacturing industry for monitoring-diagnosis bivariate process variation. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Md Noor, Nurazuwa (2014) Physical performance and durability evaluation of rubberized concrete. PhD thesis, Kyushu University.

Mohd Ali, Abdul Malik (2014) Development of biomechatronics design of an artificial arm. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mulyana, Tatang (2014) Parametric and nonparametric identification of shell and tube heat exchanger mathematical model. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Mat Hussin, Azman (2014) Direct torque control induction motor drives. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Faiz, Nur Sofurah (2014) Internationalisation as mutual adjustment in the learning and teaching experiences of international students and academic staff: a case study in a Malaysian Technical University setting. PhD thesis, University of South Australia.

Mamat, Rabiei (2014) Maximum total attribute relative of soft-set theory for efficient categorical data clustering. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Mohamad Yusof, Nur Syazana (2014) Active suspension system using linear quadratic regulator for a solid-axle railway vehicle. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Md. Yassin, Azlina (2014) Alternatif tanam semula kelapa sawit milik FELDA: implikasi kepada daya maju ladang. Other thesis, Universiti Tun Hussein Onn Malaysia.

Mustakim, Fajaruddin (2014) Analysis of fatal-serious accidents and dangerous vehicle movements at access points on Malaysian rural roads. PhD thesis, Nagoya Institute of Technology.

Mahmood, Haslina (2014) Analytical hierarchy approach for load shedding scheme: a case study based on the Johor system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Muda@Ali, Rosnani (2014) Bandpass filter design with spurious frequency reduction capability. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohammad, Nurul Emi Nor Ain (2014) Comparative study on vibration performance and mechanical properties between natural and synthetic silica based polysiloxane. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Moris, Alexsteir (2014) Critical point study in the Sabah power grid for cascading failure blackouts. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mat Mom, Siti Khadijah (2014) Critical success factor bagi program keusahawanan di Jabatan Perdagangan Politeknik. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Khalid, Maizahtulakma (2014) Design improvement and performance analysis of a 6 slot 7 poles outer rotor HEFSM for direct drive electric vehicles. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamed, Mohamed Hashi (2014) Design of defected ground structure (DGS) for mutual coupling reduction of microstrip antenna array. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Muhamad, Nor Azrinna (2014) Design of zero-current switching DC-DC buck converter. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mat Yatim, Nurul Syazrah (2014) Development of time delay current control for lead acid battery 12 V DC by using Arduino. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohammad, Nurul Nadia (2014) Development of time delay voltage control for lead acid battery using Arduino. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mamat, Umi Mariana (2014) Development of train control system using fuzzy logic. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamad, Suhaimi (2014) Energy efficiency improvement for faculty of technical and vocational education building. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Muhalhal, Hasan Abduallatif (2014) Experimental study of heat transfer characteristics of round air jet impinging on convex surface. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Yassin, Zaris Izzati (2014) Exploring the bilateral and hybrid model in deregulated electricity market. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Miaat, Eriniwati Aliza (2014) Faktor yang mendorong kecenderungan pelajar kolej vokasional ke arah bidang keusahawanan. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mat Shah, Muhammad Amir (2014) Flexible link aerator for dissolved oxygen generation in tiger prawn pond. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Rahman, Hamijah (2014) Fuzzy random regression to improve coefficient estimation for Malaysian agricultural industry. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mod Arifin, Ahmad Izzat (2014) Hysteresis current control technique for three phase induction motor (MATLAB Simulink & ARDUINO). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Atan, Bainun Akmal (2014) Influence of UV irradiated on high doping TiO2 of polymer foam for acoustic study. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Madar, Ahmed Mohamed (2014) Introducing of parasitic elements to short backfire antenna for radiation pattern improvement. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamad Rani, Mohamad Zulfadli (2014) Investigation of stress analysis on coating-substrate interfacial with pre-cracked model. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mahd Rawe, Siti Nur Aishah (2014) Investigation on non-linear grading material as stress control on medium voltage cable termination. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Alwi, Meor Mohd Nazir (2014) Kecenderungan pelajar Pusat Latihan Teknologi Tinggi (ADTEC) Batu Pahat memilih latihan vokasional. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Md Harun, Zaiha Nabila (2014) Kompetensi guru dalam pengajaran amali reka bentuk dan teknologi di Sekolah Rendah Daerah Batu Pahat. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Zain, Fadzly (2014) Limitation of lithium fluoride (LiF) properties for passivation layer in organic solar cells application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamed, Sulzakimin (2014) Malaysian local governments’ role towards sustainable development focusing on knowledge transfer practices framework. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Mokhtar, Mohd Firdaus (2014) Mango (Harum Manis) quality grading system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohammed Saif, Yazid Abdulsameea (2014) Modelling and simulation of surface roughness obtain from micro milling by using artificial neural network. Masters thesis, Universiti Tun Hussein Onn Malaysia.

M. Alsharif, Ali Omar (2014) Neutral point inverter controller using h infinity techniques. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Muhsin Al-Juhaishi, Lafta Flayih (2014) Numerical analysis of a fin-tube plate heat exchanger with winglets. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mokhtar Emhemad, Abdelhadi Mosbah (2014) On the development of computer code for aircraft flight dynamics analysis. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamed Alazomui, Outman (2014) On the development of computer code for aircraft flight dynamics analysis. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Hanifah, Nor Hazreen (2014) Optimisation of electric field distribution around polymeric outdoor insulator. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamed Tazudin, Faizul Rizal (2014) PI hysteresis current control technique for three phase induction motor by using Matlab and Arduino. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Johary, Noorain (2014) Path tracking algorithm for an autonomous ground robot. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Morsin, Marlia (2014) Pembangunan sensor asid borik menggunakan sifat resonans plasmon permukaan setempat nanoplat emas. PhD thesis, Universiti Kebangsaan Malaysia.

Mohamad, Norhusna (2014) Penglibatan dalam aktiviti kitar semula kertas terpakai dalam kalangan pelajar Fakulti Pendidikan Teknikal dan Vokasional, Universiti Tun Hussein Onn Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Fauzi, Noor Akhmazillah (2014) Quality improvement of manuka honey through the application of high pressure processing. PhD thesis, University of Auckland.

Mat Loddin, Mohd Zamadi (2014) Quantitative mixing analysis of laminar flow in static mixer with space filling circle grid perforated plate. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohammed, Mohammed Akram (2014) Quasiturbine rotor development optimization. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mahamad, Mohd Khairil Annas (2014) Shear behaviour of reinforced concrete using polyethyelene terephathalate (PET) bottles as fine aggregate. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Taha, Norreza (2014) Stres guru yang mengajar subjek Reka Bentuk dan Teknologi (RBT) di sekolah rendah di Kuantan. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Md Amin, Izatti (2014) Study on transmission congestion management for restucturing market. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Marian, Mohd Fairuz (2014) Synergistic artificial neural network scheme for monitoring and diagnosis of multivariate process variation in mean shifts. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamed Ibrahim, Izan Rozaimie (2014) Tinjauan pendapat pelatih ke atas pentaksiran berasaskan institusi di Institusi Latihan Kemahiran Awam. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamad Nasir, Nadia Nurnajihah (2014) Vibration simulation of plate with attached multiple absorbers. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamad Ariffin, Siti Noor Aishah (2014) An automatic traffic cones dispenser and collector system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mawlood, Senan Adel (2014) The iris recognition using gray level co-occurrence matrix for gabor wavelet transform and principal component analysis through path analysis test case. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Manshoor, Bukhari and Salleh, Hamidon and Khalid, Amir and Abdullah, Aslam and Zakaria, Hanis and Othman, Mohd Fahmi (2014) A new approach in determine of the coefficient of variation (COV) for internal rapid mixing using a space filling circle grid fractal for improving a combustion burning limits. Other thesis, Universiti Tun Hussein Onn Malaysia.

Madun, Aziman and Ghazali, Mohd Imran and Zainorabidin, Adnan and KSM Kader Ibrahim, Babul Salam and Yusoff, Nor Azizi and Ahmad Tajudin, Saiful Azhar and Kamarudin, Ahmad Fahmy and Joret, Ariffuddin and Nayan, Nafarizal and Zahari, Muhammad Nur Hidayat and Zainuddin, Siti Zuraidah (2014) A novel technique to predict soil deformation. Other thesis, Universiti Tun Hussein Onn Malaysia.

Muhammad Muhyiddin, Ahmad Haniff (2014) A wireless camera supervision robot (CSR-BOT) for the cylindrical pipes and cables surfaces observation. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamed , Saleh Omar (2013) Performance enhancement of salisbury screen microwave absorber using dual-layer frequency selective surfaces (FSS). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Ridzuan, Noridah (2013) Design and simulation of low power consumption polymeric based MMI thermo-optic switch. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Md Tahir, Zuraidi (2013) Development of an AC-DC boost power factor correction. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Md Sarif, Nur Azhani (2013) Personal navigator for visual impaired person utilizing galvanic vestibular stimulator. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Ariffin , Maslina (2013) Enhancing fuel burning efficiency by regulate spark plug voltage supply. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mahmood Almuhaya, Mukarram Abduljalil (2013) FPGA based maximum power point tracking controller for photovoltaic system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mokhtar , Mohd Faiz (2013) Features extraction of geometry defect monitoring in cylindrical piping. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Zain, Noorhafiezah (2013) Kecerdasan matematik-logik dalam kalangan pelajar Sarjana Pendidikan Teknik dan Vokasional UTHM. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Md Esa, Muhamad Matta (2013) Mitigating blind spot collision utilizing ultrasonic gap perimeter sensor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Maskan, Norsyuhadah (2013) Pelaksanaan pentaksiran berasaskan sekolah (PBS) bagi Mata Pelajaran Sains di Sekolah Kebangsaan Daerah Pontian, Johor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Muridan, Natashadora (2013) Penguasaan kemahiran komunikasi interpersonal dalam kalangan pelajar tahun satu Fakulti Pendidikan Teknikal dan Vokasional di UTHM. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mahadan, Mohd Ezwan (2013) Simulation of a single-phase active power filter based ANN controller. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Miskam, Nurasyikin (2013) Transformasi Pekan Parit Raja: kajian terhadap kesejahteraan hidup masyarakat. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamad Ali, Ummu Umairah (2013) Transformer life prediction using data from units removed from service. Masters thesis, Universiti Tun Hussein Onn Malaysia.

M. Saad, Magedi Moh. (2013) Aerodynamic characteristic study for unmanned air vehicles (UAVS) FX63-I37. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Nawi, Mohd Al-Hafiz (2013) Aerodynamics of a swirling fluidized bed. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Kasim , Ct Valkyis (2013) Analysis of existing effectiveness and method to enhance the lightning, shielding and earthing protection schemes applied on the Parit Raja’s telecommunication tower system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mad Zaki @ Abdullah, Shahrul Radzi (2013) Analysis of fiber nonlinearity for various power levels in DWDM system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Idrus, Noor Hafiza (2013) Anodic oxidation of titanium in sulphuric acid (H2SO4) for biomedical application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamed Ayub, Mohd Anuar (2013) Automatic earth leakage circuit breaker with backup supply. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamed, Ehab Ali (2013) Compact monopole antenna for wireless USB dongle applications. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamed Ali, Riyaz Ahmad (2013) Deposition and characterisation of Ti02 layer using magnetron sputtering deposition technique. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamad, Salamiyah (2013) Development of a power factor correction boost converter in single phase rectifier using fuzzy logic. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Muda@Othman, Asmawi (2013) Development of a power factor correction buck converter in single phase rectifier using fuzzy logic. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mat Yusoh, Mohd Abdul Talib (2013) Development of a single phase active power filter for rectifier load. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mat Ali, Mazita (2013) Development of self balancing platform on mobile robot using PID controller. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mustaffa, Norrizal (2013) Effects of biodiesel fuel temperature on performance and emissions of a compression ignition (CI) engine. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mustapha, Mohd Faizal (2013) Elimination THD using 9- level DC to AC cascade H-bridge multilevel inverter. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Jomuin, Noryati (2013) Etika dan moral profesional dalam kalangan pelajar sarjana yang telah menjalani program latihan mengajar. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamad Taher, Mohammad Nasir (2013) Experimental study on resilient modulus of probase TX-85 stabilized subgrade soil. Other thesis, Universiti Tun Hussein Onn Malaysia.

Mazni, Nuur Maisya (2013) G-slot microstrip patch antenna for RFID application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Razali, Siti Nooraiin (2013) Instrumented physical model studies of the peat soil engineering structure interaction. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Madun, Aziman and Kamarudin, Ahmad Fahmy (2013) Investigation of dynamic characteristics and vulnerability assessment of site and existing reinforced concrete building. Other thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Halid, Nurul Nadhilah (2013) Kesediaan pelajar Politeknik Kejurteraan Elektrik dalam menceburi bidang keusahawanan. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Barkhaya, Nurul Maziah (2013) Kesediaan pelajar memiliki kemahiran teknikal tambahan: satu kajian di UTHM. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mustapha, Ahmad Sharifuddin (2013) Kitab Hidayah Al-Muta’allim Wa ‘Umdah Al-Mu’allim karangan Sheikh Daud Al-Fatani: kajian teks dan analisis. PhD thesis, Universiti Malaya.

Mohamed, Norzahida (2013) Komitmen ibu bapa menerusi PIBG dalam membantu pencapaian akademik pelajar. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamad, Mimi Mohaffyza (2013) Learning styles and academic achievement among building construction students. PhD thesis, Universiti Teknologi Malaysia.

Mohd Nawi, Fifi Khazanie (2013) Mixing and rheological characterization of water atomised stainless steel powder for metal injection moulding using waste polystyrene as binder system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Md Jamal, Muhammad Hazwan (2013) Modeling and control of the fish feeder system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Muhamad Damanhuri, Amir Abdullah (2013) Monitoring of air ducting using mechanical robot for indoor air quality (IAQ) improvement. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Khairy, Afiz Azry (2013) Multivariate quality control using an integrated artificial neural network scheme: a case study in plastic injection molding industry. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Radzi, Mohd Zulhisham (2013) Optimal allocation and sizing of distributed generation using particle swarm optimization in distribution system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mustapha, Nik Mohd. Zaitul Akmal (2013) Optimal load shedding for microgrids with unlimited DGs. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Yusoff, Suhairiyanti (2013) PID current control technique for three phase induction motor using Matlab Simulink and Arduino. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Salleh , Mohd Kamarul Afandi (2013) Pelaksanaan program kerjasama institusi-industri di Politeknik Merlimau Melaka. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Masud, Mohd Akmal (2013) Pembangunan kemahiran kerja berpasukan menerusi kursus pengurusan kokurikulum dalam kalangan pelajar sarjana pendidikan teknik dan vokasional UTHM. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamad, Nurul Haerani (2013) Pembangunan kemahiran komunikasi Bahasa Inggeris menerusi Badan Beruniform PALAPES UTHM. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Rosli, Farhana (2013) Pembudayaan keusahawanan ke arah mempengaruhi kecenderungan menceburi bidang keusahawanan dalam kalangan bakal graduan di UTHM. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Khozam, Nur Fazliyah (2013) Penghasilan perisian multimedia interaktif dan kesesuaiannya sebagai alat dan bahan bantu mengajar (ABBM) bagi Pelajar Pendidikan Khas Vokasional Kursus Pemasangan Motosikal. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Md Yunos, Jailani and Tee , Tze Kiong and Yee, Mei Heong and Hussein, Atan and Sri Sumarwati, Sri Sumarwati (2013) Pengintegrasian kemahiran berfikir aras tinggi menerusi peta minda dalam pengajaran dan pembelajaran. Other thesis, Universiti Tun Hussein Onn Malaysia.

Md Zain, Rasimah (2013) Penilaian integriti struktur robi test bed (road bridge interface test bed) di atas tanah lembut. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Musawa , Maikudi Shehu (2013) Perception of Nigerian SMEs on electronic data interchange adoption. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Madon, Rais Hanizam (2013) Performance and characterization of reverse osmosis (RO) membranes in desalination process for Malaysia’s seawater. Masters thesis, Universiti Kebangsaan Malaysia.

Mat Nor, Ahmad Hakimi (2013) Performance of unpaved road with different soft clay reinforcement. Other thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Sabri, Nur Hafizah (2013) Perlaksanaan prinsip lean dalam pendidikan. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamad Amin, Nur Aqilah (2013) Power system transient stability analysis using matlab software. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohammad, Intan Shafinaz (2013) Receiver bandwidth enhancement design for high speed optical system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamed , Hazizul (2013) Smart torque control for overloaded motor using artificial intelligence approach. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mat Deris, Mustafa (2013) Soft set approach for clustering web user transactions. Other thesis, Universiti Tun Hussein Onn Malaysia.

Memon, Aftab Hameed (2013) Structural modelling of cost overrun factors in construction industry. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Mahadi, Nur Shahreena (2013) Study on precast lighweight foamed concrete sandwich panel (PLFP) connection under flexural load. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamed, Sulzakimin (2013) Sustainable development agenda: the role of local government in Malaysia. Other thesis, Universiti Tun Hussein Onn Malaysia.

Madlan, Mohd Amran (2013) The application on the usage of natural fibers as noise absorbers. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamad, Zarina (2013) A model for federated data grid systems based on network core area. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Salleh, Rohayu (2013) A robust estimation method of location and scale with application in monitoring process variability. PhD thesis, Universiti Teknologi Malaysia.

Mohamad, Nur Suriya (2013) A study of energy efficiency opportunities in Putrajaya Maritime Centre towards green building. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Turan, Faiz (2013) A three-stage methodology for design evaluation in product development. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Mohamad Bahtiar , Wahieda (2012) Investigation on the mechanical and physical properties of treated and untreated woven sugar-palm fibre reinforced composite. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mustafa, Najwa (2012) Processibility of black garbage bag as a novel binder system in metal injection molding. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Noor, Ahmad Shukri (2012) Neighbor r neighbour replica affirmative adaptive failure detection and autonomous recovery. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Mohamed, Mohamed Ismail Pakir (2012) Supply chain collaboration among Malaysian SME manufacturers. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mansor, Marlini (2012) Implikasi kelayakan SKM pada graduan kejuruteraan dan teknikal: perspektif stakeholders. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamed, Hamidah (2012) Kecerdasan pelbagai dalam mata pelajaran Kemahiran Hidup. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohmd Arifin, Nabila Afif (2012) Finite element simulation of machining aisi 1045 steel using uncoated carbide tool. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd. Ismail, Haslina (2012) Kesan penggunaan peta minda dalam pembelajaran Mata Pelajaran Sejarah. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohammad@Chong Mung Hwa, Nona (2012) Mengkaji terma dan sifat-sifat mekanikal siling berpenebat fiber sabut kelapa. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohammad Radzi, Nur Hanis (2012) Advanced transmission service charges methodologies in deregulated electricity market environment. PhD thesis, University of Queensland.

Mat Aris, Siti Khairani (2012) Alihan kerjaya pekerja bidang teknikal kepada bidang pendidikan dalam kalangan pengajar MTUN. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Kassim, Angzzas Sari (2012) Anaerobic biological treatment for textile wastewater using bovine rectal bacteria. Other thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Rus, Anika Zafiah and Sebayang, Darwin and Abdullah, Khir and Ahmad Zaidi, Ahmad Mujahid and Mohamed Hatta, Mohamed Nasrul (2012) Bio-degradation of polyurethane based on bio-epoxy. Other thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Rus, Anika Zafiah (2012) Bio-epoxy preparation based on palm oil. Other thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Yusof, Khairul Nizar (2012) Composite foundations on Malaysian soft clay soil: applications of innovative techniques. PhD thesis, University of Leeds.

Mahzan @ Mohd Zin, Shahruddin and Omar, Badrul and Jafferi, Noormaziah and Mat Noor, Fazimah (2012) Computational model of neck and spine of human body to examine injuries. Other thesis, Universiti Tun Hussein Onn Malaysia.

Masrom, Md Asrul Nasid (2012) Developing a predictive contractor satisfaction model (CoSMo) for construction projects. PhD thesis, Queensland University of Technology.

Mohammad, Musli (2012) Development of a guidance model for the selection of organisational improvement initiatives. PhD thesis, Massey University.

Mohd Nor, Mohd Fahrurazi (2012) Development of step-compliant system for turn-mill operations. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Masirin, Mohd Idrus and Md Zain, Rasimah (2012) Differential settlement analysis of different approach slab design concept for road bridges. Other thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Yusof, Shabanun Salwa (2012) Ecology and morphology of household ant, paratrechina longicornis (latreille, 1802) in South Eastern of Johor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mahdin, Hairulnizam (2012) Enhancing RFID data quality and reliability. PhD thesis, Deakin University.

Mohd Noor, Mohd Azree (2012) Environmental noise analysis of aged ceramic insulator under influence of electrical stress. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Md Juremi, Nor Rashidah (2012) Fabrication of periodic nanoparticle arrays using nanosphere lithography technique and thin film gold as electrically enhanced catalysts. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamed Sunar, Norshuhaila and Maslan, Masayu (2012) Fate of specific pathogen indicator in extended aeration wastewater treatment plant, UTHM. Other thesis, Universiti Tun Hussein Onn Malaysia.

Mohammed , Ali Abusalah Elmabrok (2012) Financial situation of PN17 companies listed in the Malaysian stock exchange. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamed Zarti , Almehdi (2012) Gas turbine performance based creep life estimation using soft computing technique. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamad, Mohamad Zaki (2012) Gaya pembelajaran yang dominan dalam kalangan pelajar di Institut Kemahiran Mara Johor Bahru. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mahmod, Luqman Hakim (2012) Improvement of the SAG ampacity carrying level of existing 275 kV overhead line tower by using the re-conductoring apporah. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd. Hashim, Mohamad Hisyam (2012) Interaksi dalam papan buletin sistem pengurusan blackboard: satu kajian kes. Other thesis, Universiti Tun Hussein Onn Malaysia.

Md Salleh, Md Zakir (2012) Keberkesanan mengkudu (morinda citrifolia) dan mikroorganisma efektif terhadap prestasi ayam pedaging bagi mencapai konteks perniagaan hijau dalam industri ternakan ayam di Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Md Nasir, Hafiza (2012) Keberkesanan pembelajaran aktif terhadap pencapaian pelajar perempuan dalam biologi. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mansor, Nurinahafiza (2012) Keberkesanan perkhidmatan Unit Psikologi, Kaunseling dan Kerjaya dalam membantu kerjaya pelajar Politeknik. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Md Sah, Nelly Ezatul Fazlina (2012) Kesan pembelajaran berasaskan kaedah inkuiri bagi Subjek Matematik. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Isa, Noorlin Rawaida (2012) Kesan penggunaan educational multifunctional programmable logic controller kit terhadap pencapaian pelajar yang berbeza gaya kognitif. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd. Sarjan , Fatimah (2012) Kesan penggunaan modul pembelajaran Sains Tingkatan Dua. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Md Sharif, Noreliana (2012) Kesan penggunaan multimedia dalam kalangan pelajar politeknik yang berbeza gaya kognitif. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Saad, Nik Nozita (2012) Kesediaan pelajar kejuruteraan UTHM dalam aspek komunikasi. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Nor , Mohd Khir (2012) Modelling rate dependent behaviour of orthotropic metals. PhD thesis, Cranfield University.

Mohd Zaid, Amran and Hanafi, Dirman and Wibowo, Ignatius Agung and Zakaria, Mohamad Fauzi and Ribuan , Mohamed Najib and Mashori, Sumaiya and Yaqub, Muhammad Atif (2012) Multi fingered robotic hand in industrial robotic applications using tele-operation. Other thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Muji , Siti Zarina (2012) Optical tomography for solid gas measurement using mixed projection. PhD thesis, Universiti Teknologi Malaysia.

Mat Arif, Norsyahidah (2012) Pelaksanaan transformasi politeknik premier di Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamed, Nor Hasliza (2012) Penglibatan pelajar dalam pembelajaran koperatif di sekolah menengah vokasional. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Ali, Mas Fawzi (2012) Research on control of ignition and THC formation in CNG engines by the application of gas-jet direct-ignition technique. PhD thesis, University of Tokushima.

Madun, Aziman (2012) Seismic evaluation of vibrostone column. PhD thesis, University of Birmingham.

Mat Deris, Mustafa (2012) Soft set approach for categorical data clustering and maximal association rules mining. Other thesis, Universiti Tun Hussein Onn Malaysia.

Mohamad, Mahathir (2012) Soliton Cellular Automata constructed from a Uq(Dn(1)n)-Crystal Bn,1 and Kirillov-Reshetikhin type bijection for Uq(E6(1))-Crystal B6,1. PhD thesis, Osaka University.

Mohd, Fadilah (2012) Stres dalam kalangan Guru Sekolah Tunas Bakti Jerantut: satu kajian kes. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Saleh, Norazila (2012) Study on the ionogram variation at different solar activity and earthquake occurrence. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamad Narsardin, Mohamad Adhar (2012) Voltage tracking of a DC-DC buck converter using neural network control. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mat Yamin, Mohd Khairuddin (2012) Voltage uprating of existing 275kV overhead transmission line tower for increasing power transfer capability. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Kassim, Angzzas Sari (2012) The effect of environmental variation on selected pineapple (a. comusus) cultivars for pharmaceutical compounds. Other thesis, Universiti Tun Hussein Onn Malaysia.

Masek , Alias (2012) The effects of problem based learning on knowledge acquisition, critical thinking, and intrinsic motivation of electrical engineering students. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Salleh, Mohd Najib and Mohd Nawi, Nazri and Mohd Salikon, Mohd Zaki (2012) A new integrated knowledge-based system for incomplete knowledge in planting material selection. Other thesis, Universiti Tun Hussein Onn Malaysia.

Masood, Ibrahim (2012) A scheme for balanced monitoring and accurate diagnosis of bivariate process mean shifts. PhD thesis, Universiti Teknologi Malaysia.

Mohamad, Elmy Johana (2012) A segmented capacitance tomography for visualising material distributions in pipeline conveying crude palm oil. PhD thesis, Universiti Teknologi Malaysia.

Mohd Yusoff, Mohd Hairul (2011) Dispatching rule for flow shop problem by using bottleneck approach. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamed Issa , Abdanaser (2011) Rate adaptation in IEEE 802.11 WLAN based on neural network. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamed Hamad, Khlid Abobaker (2011) Corporation robots. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamed Abdel Aziz, Omar Abdel Aziz (2011) Development of wireless mechanism to reduce wiring complexities of robot manipulator. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamad, Kamaruddin Malik (2011) File carving for contiguous and linearly-fragmented jpeg images and thumbnails. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Md Mustam, Saizalmursidi (2011) Electromagnetic emission and reduction of digital circuits with various clock frequencies. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mansour, Saleh Faraj (2011) Corporation robots. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamed Jelwal, Faisel (2011) Development of a DC-AC power conditioner for wind generator by using fuzzy logic. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamed Ejledi , Alaeddin (2011) IAQ and CFD study on the ventilation system in a chassis dynamometer room. Masters thesis, Universiti Tun Hussein Onn Malaysia.

M. Gelim , Khalid. Ali. (2011) Mechanical and physical properties of fly ash foamed concrete. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamad Noor , Noraishah (2011) Prediction of springback in the forming of advanced high strength steel: simulation and experimental study. Masters thesis, Universiti Tun Hussein Onn Malaysia.

M.Elkamel, Hasan Taher (2011) Aerodynamics analysis for several fuselage geometries using fluent software and aerodynamics semi empirical method. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamed Ariffin, Nur Azliatun Hisan (2011) Classification of critical aging segments of power transmission lines. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Muftah Saad , Ferass A. (2011) Predicting transformer end of life using transformer thermal life simulation technique. Masters thesis, Universiti Tun Hussein Onn Malaysia.

M Mohammed , Abdelrazzak Gumaa (2011) The application of combined momentum and blade element theory for aerodynamics performance analysis of rotating blades. Masters thesis, Universiti Tun Hussein Onn Malaysia .

Md Salleh, Salihatun (2011) Active intelligent control of vibration of flexible plate structures. PhD thesis, The University of Sheffield.

Mohd Rus, Anika Zafiah (2011) Bio-degradation of polyurethane on bio-epoxy. Other thesis, Universiti Tun Hussein Onn Malaysia.

Md Fudzee, Mohd Farhan (2011) Broker-based service-oriented content adaptation framework. PhD thesis, Deakin University.

Ma'radzi, Ahmad Alabqari and Abdul Jamil , Muhammad Mahadi and Abdul Hamid, Intan Sue Liana and Md Tomari , Mohd Razali (2011) Development of blood cells analysis system with microelectrofluidic platform & image characterization. Other thesis, Universiti Tun Hussein Onn Malaysia.

Mohamed Razali, Muhammad Najib and Manaf , Zaharah and David , Martin and Eni , Sabariah and Mat Ali , Nazmona and Ahmad, Nor Asnita (2011) Development of knowledge management strategies for properties management companies in Malaysia. Other thesis, Universiti Tun Hussein Onn Malaysia.

Martin , David Juanil and Kasim, Rozilah and Eni, Sabariah and Ismail, Norfaezah (2011) Exploring value capture model as a policy tool for urban development. Other thesis, Universiti Tun Hussein Onn Malaysia.

Md Yunos, Norliana (2011) Kesan pembelajaran koperatif terhadap pencapaian pendidikan alam sekitar dalam kalangan pelajar sekolah menengah rendah. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Jidi, Kamarolzaman (2011) Kesesuaian homestay sebagai Pusat Latihan Pendidikan Luar di Johor Darul Ta'zim. PhD thesis, Universiti Selangor.

Mokhtar, Mardiha (2011) Mechanical properties of soft clay stabilized with cement-rice husks (RH). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Razali, Siti Noor Asyikin (2011) Menu planning model for Malaysian Boarding School using self-adaptive hybrid genetic algorithm. PhD thesis, Universiti Utara Malaysia.

Mahamud, Nurbaity Aqmar (2011) Pengukuran prestasi pemaju perumahan berdasarkan sistem star rating. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Yunos, Siti Nur Mariani (2011) Performance characteristics monitoring of turboprop engine for the development of preliminary requirement of an engine testing facility. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Muhd Nor, Nik Hisyamudin (2011) Physicochemical study of absorption of CO2 into electric arc furnace slag. PhD thesis, Toyohashi University of Technology.

Mohamed Nasir, Noorhamizah (2011) Real time implementation of PID and fuzzy logic controller for single tank system using LABVIEW. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mahmud , Farhanahani (2011) Real-time simulation and control of spatio-temporal cardiac excitation using an analog-digital hybrid circuit model. PhD thesis, Osaka University.

Md Ali, Zarina and Wan Mohamed, Wan Afnizan and Mohammad Razi, Mohd Adib and Mat Daud, Azra Munirah and Ahmad, Noor Aliza (2011) Sediment transport behaviour in river system. Other thesis, Universiti Tun Hussein Onn Malaysia.

Mokhtar, Norfaniza (2011) Shear strength analysis of concrete beams reinforced with GFRP bars using strut and tie model. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Tawil, Siti Nooraya (2011) Studies on the growth and characterization of rare-earth Gd-Doped InGaN/GaN magnetic semiconductor heterostructures. PhD thesis, Osaka University.

Mohd Nawi, Nazri (2011) A new method to enhance the computational efficiency of data mining classification modelling techniques by introducing gain parameter. Other thesis, Universiti Tun Hussein Onn Malaysia.

Md Kamaruddin, Nafisah Kamariah and Wan Ahmad, Wan Mohd Rashid and Alias, Maizam and Che Him, Norziha and Md Nor, Maria Elena and Abdul Razzaq, Abdul Rasid and Esa, Ahmad (2011) A study of the effectiveness of the contextual approach to the teaching and learning statistics in the Universiti Tun Hussein Onn Malaysia (UTHM). Other thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Zukeri , Mohd Zaim (2010) Study on cutting operation in turning process by 3d simulation using deform 3D. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohammed Elbireki , Majdi Farag (2010) Theoretical analysis of photoparametric amplifier. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Zain, Norhidayah (2010) Development of palm oil-based fly ash powder-binder system for three-dimensional printing. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mat Jubadi, Warsuzarina and Mohamad, Mazita and Mohd Zin, Rosnah and Zinal , Nabiah (2010) A study of variable I-region thickness effects on pin diode switching speed. Other thesis, Universiti Tun Hussein Onn Malaysia.

Mahamad, Abd Kadir (2010) Diagnosis, classification and prognosis of rotating machine using artificial intelligence. PhD thesis, Kumamoto University.

Mustapa, Mohammad Sukri (2010) Effect of second phase particle on fatigue crack growth behavior in microstructure controlled steels. PhD thesis, Nagaoka University of Technology.

Mohamad, Md Nor Anuar (2010) Efficiency analysis of automotive hydrogen internal combustion engine combined with a steam rankine cycle. Masters thesis, Nagaoka University of Technology.

Mad Sahar, Nan (2010) Risk management for safety operation utilizing virtual reality simulation supported by intelligent HAZOP analysis. PhD thesis, Okayama University.

Mohamad, Noridah (2010) The structural behaviour of precast lightweight foamed concrete sandwich panel as a load bearing wall. PhD thesis, Universiti Teknologi Malaysia.

Mohd Safian, Edie Ezwan (2009) Model klasifikasi bagi pejabat binaan khas di kawasan Segi Tiga Emas Kuala Lumpur. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohmad Zakwan@Zakuan, Norhayati (2009) Structural analysis of total quality management, ISO/TS16949 and organizational performance in Malaysian and Thailand automotive industry. PhD thesis, Universiti Teknologi Malaysia.

Md Ngadiran, Nurizah (2009) A comparison between malay and american responses to compliments in english. Masters thesis, Universiti Teknologi Malaysia.

Mohamed Yunus, Mohd Radzi (2009) Discrete element modelling of particulate flow in die filling and powder transfer. PhD thesis, Swansea University.

Mohammad, Hairuddin (2009) Quality and satisfaction of house owners for industrialised building system and conventional building system. Masters thesis, Universiti Teknologi Malaysia.

Mustaffa Kamal, Mohd Firdaus (2009) Reduce, reuse, sustainable recycle and recovery technique in construction waste management. Masters thesis, Universiti Teknologi Malaysia.

Mozi, Aiza Mahyuni (2009) An evaluation on the contribution of differential mode and common mode currents in radiated emission of digital circuits. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mat Noor, Fazimah (2009) Development of powder metallurgy route for production of novel fe-al intermetallics for high temperature applications. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Md Seri, Suzairin (2009) Numerical simulation of jet impingement cooling on a smooth concave surface. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Miskon , Azizi (2009) Studies on engineered microenvironment for manipulating cells in tissue regeneration. PhD thesis, Osaka University.

Madar, Ahmad Rizal (2009) Keberkesanan animasi grafik dalam kalangan pelajar berbeza gaya icognitif dan kebolehan visualisasi spatial di politeknik. PhD thesis, Universiti Teknologi Malaysia.

Mohd Kassim, Amir Hashim and Radin Mohamed, Radin Maya Saphira (2009) Study on the potential of greywater reuse/recycling in individual household system. Other thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Bakri, Muhammad Hassan (2008) The comparison between conventional and industrialized building system formwork towards sustainable construction. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamad Twon Tawi , Faizal (2008) Kecerdasan kejayaan dan hubungannya dengan pencapaian akademik pelajar kejuruteraan Universiti Tun Hussein Onn Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Manap, Norpadzlihatun (2008) Common problems encountered by Malaysian dredging stakeholders, the recommendation and relation to the environment. Masters thesis, Universiti Putra Malaysia.

Mohd Ariff, Mohd Hisyam (2008) Field estimation of induction motor performance using dynamometer method and equivalent circuit method. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Muhamad, Mohamad Zamri (2008) Kajian terhadap nilai ETOS melalui komunikasi pedagogi pensyarah di UTHM. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Jaini, Zainorizuan (2008) Crack cronology of reinforced concrete beam under impact loads. Masters thesis, Swansea University.

Mohd Noor, Nazihah (2008) Kesediaan bakal pendidik teknik dan vokasional menerima penempatan yang ditetapkan. Masters thesis, Universiti Teknologi Tun Hussein Onn Malaysia.

Mohd Salleh , Mohd Rezal (2008) The concrete structure remedial assessments in marine environment from whole life asset management perspectives. Masters thesis, University of Leeds.

Mohd Noh , Faridah Hanim (2008) Voltage sag waveform features extraction using matlab. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Md. Diah, Noorasmahwati (2008) Penguasaan kemahiran komunikasi dalam kalangan pelajar kejuruteraan di politeknik. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Md Zain, Mohamad Naaim (2008) Kecenderungan pembelajaran teknikal melalui pembelajaran koperatif di kalangan pelajar ijazah sarjana muda kejuruteraan mekanikal di UTHM. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamad , Siti Khatijah (2008) Hubungan antara jenis bahan bacaan dengan gaya pembelajaran pelajar sekolah menengah teknik. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Musa, Nurliana (2008) Model pembelajaran berasaskan kaedah penyelesaian masalah ke atas pelajar berbeza gaya kognitif dan kemahiran logik. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mansor, Zulkifli (2008) Pelaksanaan dan penilaian kemahiran insaniah dalam mata pelajaran kokurikulum di UTHM. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Noh, Norasyidah (2008) Penguasaan kemahiran insaniah dalam kalangan pensyarah terhadap pengurusan makmal di politeknik. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohid, Zazuli (2008) Evaluation of glass welding by ultrashort pulse laser. Masters thesis, Okayama University.

Mad Saad @ Shamsuddin , Mariati (2007) Analisis kualiti penulisan projek sarjana di Fakulti Pendidikan Teknikal UTHM. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Montel , Nur Amalina (2007) Kecenderungan pemilihan bidang pengkhususan dalam kalangan pelajar UTHM dan hubungannya dengan pencapaian akademik. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Jamail , Nor Akmal (2007) Partial discharge detection for condition monitoring of an 11-Kv XLPE cable. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Md Yusof , Ramlah @ Ayu (2007) Penerapan unsur-unsur patriotisme melalui pengajaran dan pembelajaran dalam kalangan pensyarah politeknik. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Jamil, Mohd Ridhuan (2007) Reka bentuk kerangka piawaian transnasional bagi program tenaga pengajar TVET. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Salleh, Mohd Arif Anuar (2007) Systematic investigation of failure analysis on a steam trap bypass tube in a coalfired power plant. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Mokhtar , Nur Faridah Hanim (2007) Kesan stress terhadap pencapaian akademik dan personaliti pelajar politeknik. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Muin Hashim, Mohd Fadzil (2007) Prediction of punching life span for phosphor bronze stamping operation. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Amin, Azriszul (2007) Analysis of temperature distribution in disc brakes. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Daud, Mohd Nazrin (2007) Simulation of pavement deformations for different approach SLABS concept constructed on Batu Pahat Soft Clay (BPSC). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamd Saleh, Nurul Huda (2007) Perlaksanaan program latihan dalam perkhidmatan ke arah pembangunan profesional pensyarah politeknik. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamad , Norliana (2007) Hubungan antara beban tugas dengan keresahan guru sekolah menengah teknik di Johor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Jelani, Anida (2007) Perlaksanaan latihan industri dalam meningkatkan kebolehkerjaan: satu kajian kes pelajar-pelajar bidang perhotelan di politeknik johor bahru. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Ali, Mas Fawzi (2007) Development of a direct fuel injector for a two-stroke gasoline engine. Masters thesis, Universiti Teknologi Malaysia.

Md. Noh , Mohammad Soffi (2007) Nonlinear finite element analysis of integral bridge including foundation soil interaction (wrinkler analogy). Masters thesis, Universiti Putra Malaysia.

Md Tomari , Mohd Razali (2006) Detection and classification of moving objects for an automated surveillance system. Masters thesis, Universiti Putra Malaysia.

Mohd Rus, Anika Zafiah (2006) Thermal and photochemical degradation of polyurethanes based on renewable materials. PhD thesis, University of Warwick.

Mohd Yusop , Mohd Yusri (2006) Robot interfacing studies for automated manufacturing system design. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn. .

Md Salleh, Shamsulkhairi (2006) Hubungan antara tahap kompetensi dengan tahap prestasi kerja di kalangan pentadbir Kolej Universiti Teknologi Tun Hussein Onn(KUiTTHO). Masters thesis, Universiti Teknologi Malaysia.

Md Yusoh, Hamidah Noor (2006) Amalan pemakanan yang sihat di kalangan pelajar Sekolah Menengah Teknik. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Md Yusof, Hamidah Noor (2006) Amalan pemakanan yang sihat di kalangan pelajar sekolah menengah teknik. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mohamed Idris, Mohammad Talha (2006) An investigation on teaching and learning activities that suit different intelligences in an English classroom. Masters thesis, Universiti Teknologi Malaysia.

Md Ariffin, Latifah (2006) Integrating maple in the teaching and learning of mathematics for business and economics. Masters thesis, Universiti Putra Malaysia.

Md Noor, Nurazuwa (2006) Comparative study on structural behaviour of bonded and unbonded post-tensioned beam. Masters thesis, Universiti Putra Malaysia.

Mohd , Sofian (2006) Dynamic analysis of a 10m diameter wind turbine rotor under maximum wind load of Malaysia. Masters thesis, Universiti Teknologi Malaysia.

Mohamed , Masnani (2006) Features extraction of heart sounds using time-frequency distribution and mel-frequency cepstrum coefficient. Masters thesis, Universiti Teknologi Malaysia.

Mohammad , Musli (2006) Strategies for implementing integrated management system in the Malaysian manufacturing companies. Masters thesis, Universiti Putra Malaysia.

Mohd Hashim, Mohamad Hisyam (2006) Interaksi dalam sistem pengurusan pembelajaran : satu kajian kes. PhD thesis, Universiti Pendidikan Sultan Idris.

Md Zain, Mohd Zahiruddin (2005) Influence of electrical parameters and optimization of EDM performance measures on Ti-6A1-4V using DOE/TAGUCHI method. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mat Jubadi, Warsuzarina (2005) Embedded TCP/IP in sensor nodes (Sensornets. Masters thesis, Universiti Teknologi Malaysia.

Mohd Kiblee , Shahizul Eza (2005) Lane detection system for autonomous vehicle using image processing techniques. Masters thesis, Universiti Putra Malaysia.

Mohd Zin, Nur Shaylinda (2005) Decolourisation of dye solution containing AZO acid orange 7 by electricity. Masters thesis, Universiti Teknologi Malaysia.

Mohd Zin , Rosnah (2005) Analysis of FPGA design methods using AN 8 Bit ALU. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mohd Ali, Ahmad Zurisman (2005) The effect of eccentricity at beam support to beam stiffness. Masters thesis, Universiti Teknologi Malaysia.

Md Jalil, Mohd Azlis Sani (2005) Development of Al-Cu-SiCp metal matrix composite for automotive applications. Masters thesis, Universiti Malaya.

Murli, Norhanifah (2005) Evaluation of video streaming quality using quicktime streaming server (QTSS):|ba case study in Faculty of Information Technology and Quantitative Sciences, UiTM. Masters thesis, Universiti Teknologi MARA.

Mahmad Jaat , Md. Norrizam (2005) The application of energy analysis on an educational steam power plant. Masters thesis, Universiti Teknologi Malaysia.

Mansor, Mohamad Norani (2005) An improvement to integrated model of electro pneumatic circuit for material handling in a manufacturing cell. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mahamad , Abd Kadir (2005) Monitoring and prediction of bearing failure by acoustic emission and neural network. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mohamed, Mohd Rusllim (2004) Decision tree-based approach for online management of pem fuel cells for residential application. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Morsin, Marlia (2004) Fabrication, characterization and optimization of in-house MOSFET transistor using spin on dopant technique. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mohamad , Ahmad Johari (2004) Robust power system stabilizer design based on LMI optimization approach. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Masood, Ibrahim (2004) SPC charting procedure for monitoring of small and large shifts in process mean. Masters thesis, Universiti Teknologi Malaysia.

Mustafa, Mahfuzah (2004) Connection of siemens PLC to labview using OPC. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mohd Yunus, Khairul Nizam (2004) Penggunaan kaca buangan sebagai agregat halus dalam turapan asfalt. Masters thesis, Universiti Tekoologi Malaysia.

Musa, Sabariah (2004) Peramalan siri masa aliran sungai dengan kaedah ARIMA dan pelicinan eksponen. Masters thesis, Universiti Teknologi Malaysia.

Mat Hashim, Noriza (2004) Kajian rekabentuk dan susunatur perabot dan peralatan makmal perpaipan - satu cadangan. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mohd Asrah, Norhaidah (2004) Suatu perbandingan penilaian prestasi pelajar mengikut kaum di Fakulti Sains dan Teknologi, UKM : kaedah model linear Bayesian dan model linear klasik. Masters thesis, Universiti Kebangsaan Malaysia.

Mohd Isa, Zailan (2004) The development of performance measurement framework in the management of public office buildings in Malaysia. PhD thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mohamed, Nor Hidayah (2004) Pembinaan e-modul mata pelajaran hidrologi :kajian di Politeknik Shah Alam. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mohamad @ Mohd Nor, Aryuziyanti (2004) Penggunaan ABBM dalam proses pengajaran dan pembelajaran Lukisan Kejuruteraan : satu kajian di Politeknik Port Dickson. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mat Il, Mohd Zainal (2004) Hubungan di antara status sosio ekonomi (SSE) keluarga dengan pencapaian akademik : satu kajian ke atas pelajar aliran teknikal di Sekolah Menengah Teknik Negeri Sembilan. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Minhat, Norhasyila (2004) Pemilihan kerjaya di kalangan pelajar aliran perdagangan sekolah menengah teknik:satu kajian kes. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mat Puzi, Azuyaria (2004) Penghasilan modul berasaskan multimedia bagi mata pelajaran perdagangan di sekolah menengah teknik. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mohamad, Hazilah (2004) Penghasilan modul pembelajaran berkomputer (MPB) "Air Bekalan: Proses Pembersihan Air" bagi pelajar Kejuruteraan Awam di KUiTTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mohamed Hakke, Emi Satira Azrin (2004) Pembangunan persembahan elektronik berasaskan klip video dalam melaksanakan aktiviti pengajaran dan pembelajaran. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mokhtar, Syamsiah (2004) Pembangunan dan penilaian modul berbantukan komputer bagi subjek pemasaran:Politeknik Port Dickson. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Muzafar, Siti Asmiza (2004) Kemampuan Politeknik Kementerian Pendidikan Malaysia melaksanakan program pendidikan khas bagi pelajar cacat pendengaran (pekak) dalam program sijil dan Diploma Politeknik. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Mohd Khathri, Akasyah (2004) Merekabentuk dan menilai peralatan serbaguna untuk ujikaji keseimbangan daya, roda tenaga dan peluncuran. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Maskin, Masliza (2004) Peningkatan tahap pendidikan pensyarah dalam kerjaya: satu tinjauan di Politeknik. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Md. Yassin, Azlina (2004) Land use management and urban development in West Europe. Masters thesis, Universiti Putra Malaysia.

Mohd Nasir , Nizam (2003) Penghasilan perisian sistem pakar mendiagnosis kerosakan komputer (CoFDES) dan kepenggunaannya dalam membantu staf pentadbiran Kolej Universiti Teknologi Tun Hussein Onn (KUiTTHO) membaikpulih komputer secara kendiri. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mohd. Yusoff, Ida Maria (2003) Kesan latihan mengajar kepada perkembangan kognitif pelajar sarjana pendidikan teknik dan vokasional KUiTTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mohd Sahap, Noorziawati (2003) Keberkesanan penggunaan cd-i dalam mata pelajaran teknologi konkrit (C 1004) sebagai alat bahan bantu mengajar (ABBM). Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mahmood, Che Hasnah (2003) Pembelajaran berbantukan komputer (PBK) dalam subjek Kejuruteraan Jalanraya : bahan-bahan kejuruteraan jalanraya. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Muhamad Yusoff, Hasyimunfazlie (2003) Pembangunan modul pembelajaran lukisan kejuruteraan awam bagi pelajar KUiTTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Masri, Masidah (2003) Pembangunan dan penilaian alat bahan bantu mengajar (ABBM) berbantukan komputer bagi mata pelajaran pengurusan perniagaan. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mohd Lajim, Faeizah (2003) Pembangunan modul pembelajaran mekanik tanah (DKA 2053) bagi pelajar kursus diploma kejuruteraan awam di KUiTTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Mohamed Yusof, Azean Irdawaty (2003) Pembangunan dan penilaian modul berbantukan komputer (MBK) bagi mata pelajaran Pengurusan Perniagaan (P 315) di politeknik. Masters thesis, Fakulti Teknologi Kejuruteraan.

Mat Ali, Asrudin (2003) Pembangunan prototaip modul pengajaran dan pembelajaran berbantu komputer bagi mata pelajaran Mekanik pepejal (tegasan dan terikan). Masters thesis, Fakulti Teknologi Kejuruteraan.

Mohd Nadzri , Mohd Azaharuddin (2003) Pembelajaran carta kawalan X - BAR dan R melalui e-modul. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mohammad Noor, Mastura (2003) Penggunaan ABBM berbantukan komputer bagi subjek pemasaran di kalangan pelajar Politeknik Port Dickson. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mohamed, Huzairi (2003) Penggunaan simulasi CD interaktif dalam pembelajaran dan pengajaran amali Sistem Pemasangan dan Pendawaian Domestik. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Mh Busra, Mohd Azmi (2003) Penghasilan dan penilaian modul pengajaran kendiri pencukaian perkongsian di Politeknik Port Dickson. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Mohamed, Noraini (2003) Persepsi pelajar Ijazah Sarjana Muda Kejuruteraan di KUiTTHO terhadap jadual waktu rasmi : satu tinjauan. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Muhamad, Norazlinun (2003) Kesesuaian penggunaan modul pembelajaran kendiri (mpk) bertajuk promosi jualan bagi mata pelajaran pengurusan promosi (p3704) di kalangan pelajar semester tiga diploma pemasaran. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Nor, Nor Suriani (2003) Pembangunan media tayang (video) dalam prosedur ujikaji makmal bagi matapelajaran kejuruteraan jalanraya dan pengangkutan (BKA 4061) di Kolej Universiti Teknologi Tun Hussein Onn. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mat Ali, Mazrul Hisyam (2003) Penghasilan dan penilaian cakera padat video dokumentari pendidikan mesin suntikan plastik bagi subjek kejuruteraan pengeluaran di Politeknik Sultan Abdul Halim Mu'adzam Shah, Jitra , Kedah. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mohd Mustafa, Masherna (2003) Pembinaan modul pembelajaran elektronik matapelajaran fisiologi bagi pelajar kursus kejuruteraan elektrik (Elektronik Perubatan), KUiTTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mohd Iham@Sham, Haslienda (2003) Pembangunan halaman web Kartografi (CARToWeb) bagi menyediakan satu kemudahan pembelajaran di politeknik. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mohamed, Nadia (2003) Merekabentuk modul pembelajaran ukur kejuruteraan(C301) berasaskan laman web. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mior Ismail , Mior Mohd. Suhairin (2003) Kajian persepsi pelajar terhadap amalan keselamatan bengkel kejuruteraan awam (perkayuan). Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mohamed, Maziana (2003) Pembangunan dan penilaian e-modul bagi topik struktur binaan tangga subjek teknologi bahan dan binaan. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mohamed Rafi, Sharmili (2003) Pembangunan modul pembelajaran kendiri (MPK) Perakaunan Awalan (P1105) bagi pelajar semester 1 Diploma Akauntansi dan Pemasaran di politeknik. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Md Osman, Siti Zuraidah (2003) Pembangunan modul subjek pencukaian Malaysia 1 (P 419) bagi pelajar Diploma Akauntasi di politeknik. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Mohd Yusoff, Normieza (2003) Pembangunan portal pendidikan geografi berasaskan web-based GIS. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mohd Hassan@Abd Ghani, Mohd Shahril (2003) Penghasilan buku panduan rekabentuk pengeluaran sebagai ABBM sokongan di dalam proses pembelajaran di kalangan pelajar Ijazah Sarjana Muda Kejuruteraan Mekanikal (Pembuatan) di KUiTTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Misnan, Nur Iliza (2003) Penghasilan dan penilaian kesesuaian borang penilaian kokurikulum di sebuah politeknik. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Md Zahari @ Che Hussin, Noorafzarini (2003) Penghasilan dan penilaian modul pembelajaran kendiri pelepasan diri dan rebet cukai: satu kajian kes. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mat Nor, Suhaila (2003) Penghasilan dan penilaian modul pembelajaran pelarasan akaun: satu kajian kes di politeknik. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Mohd Nor, Mazly (2003) Penghasilan modul e-pembelajaran berkonsepkan web: Penyaliran Jalan Raya. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mat Taib, Noor Hayati (2003) Penghasilan modul pembelajaran kendiri berasaskan cakera padat dalam pengajaran dan pembelajaran bagi subjek Teknologi Bahan 1 (J 3022) Kursus Kejuruteraan Mekanikal. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mohd Hanapi, Norhazlinda (2003) Penghasilan perisian modul pembelajaran kendiri bagi proses mereka bentuk pangkalan data untuk mata pelajaran pengurusan pangkalan data di Kolej Universiti Teknologi Tun Hussein Onn. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mohd Hassan, Jamaayah (2003) Tinjauan tahap pengetahuan pelajar mengenai bidang pekerjaan dalam bidang ukur tanah di Politeknik Sultan Haji Ahmad Shah. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Muhammad, Suzana (2003) Tinjauan terhadap gaya pembelajaran di kalangan pelajar-pelajar semester dua Diploma Pemasaran di Politeknik Sultan Abdul Halim Mu'adzam Shah. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mohamad, Mahathir (2003) Kebukansferaan langsung persembahan kumpulan relatif panjang lima. Masters thesis, Universiti Kebangsaan Malaysia.

Mohd Yusof, Nor Zalina (2003) Amalan komunikasi berkesan antara ketua jabatan dengan staf akademik di politeknik semenanjung Malaysia : satu kajian. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mohd Faroque, Syafizwan Nizam (2003) Cabaran-cabaran kemajuan kerjaya wanita menurut persepsi pelajar Sarjana Pendidikan Teknik dan Vokasional di Kolej Universiti Teknologi Tun Hussein Onn. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Masro, Norawati (2003) Kualiti pengalaman pembelajaran pelajar-pelajar Sarjana Muda Kejuruteraan Elektrik di Kolej Universiti Teknologi Tun Hussein Onn (KUiTTHO) dari aspek pembelajaran kognitif, psikomotor dan afektif. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mohamad, Suriah (2003) Pengetahuan terhadap pembinaan item soalan esei di kalangan guru-guru kejuruteraan : suatu tinjauan. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Mohamad, Harulnizam (2003) Penggunaan modul pembelajaran elektronik (MPE) pengenalan pelancongan H 111:tinjauan terhadap pensyarah dan pelajar Diploma Pengurusan Pelancongan, Politeknik Johor Bahru. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mohd. Yusof, Irdayani (2003) Penghasilan rangka tindakan yang komprehensif perlaksanaan program pembelajaran secara koperatif dalam komuniti:aktiviti pelancongan budaya dalam program homestay. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Mohd Yunus, Mohd Fauzi (2003) Penghasilan modul pembelajaran lukisan kejuruteraan berbantukan komputer (CAD 3D). Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Mat , Mohd Zulhasnan (2003) Aplikasi sistem maklumat stok dan inventori makmal JPTV. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Md Piah, Mohd Fauzi (2003) Garis panduan keselamatan dan kesihatan pekerja di tapak bina bagi kontraktor binaan. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Mohd Nazri, Daros (2003) Kajian Penggunaan Modul Pembelajaran Elektronik Mata Pelajaran Pengurusan Penyeliaan (C523) Ke Atas Pelajar-Pelajar Kursus Perkhidmatan Bangunan, POLIMAS. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Mohd Sarl, Kamarul Aini (2003) Kajian keselesaan terma di penginapan pelajar Universiti Sains Malaysia. Masters thesis, Universiti Sains Malaysia.

Miskam, Siti Norazian (2003) Panduan penulisan objektif eksplisit dalam perancangan pengajaran bagi guru-guru pelatih pengurusan perniagaan dan perakaunan. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mohd Jainury, Suhartini (2003) Pemantapan penilaian prestasi guru pelatih dalam program latihan mengajar di Kolej Universiti Teknologi Tun Hussein Onn (KUiTTHO). Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mohamed Yunus, Ahmad Syukri (2003) Pembentukan dan penilaian indikator begkel elektrik cemerlang : satu kajian di sekolah Menengah Teknik Johor Bahru. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mohd Yazit , Tengku nur Syarah Bariah (2003) Pembentukan dan penilaian indikator bengkel kayu kejuruteraan awam cemerlang : satu kajian di Politeknik Sultan Salahuddin Abdul Aziz Shah. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mail, Aspalilla (2003) Pembinaan modul pendekatan perancangan pengajaran berkesan Kemahiran Hidup Bersepadu Tingkatan 1. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mohammed Sani, Abdul Rahim (2003) Pengajaran dan pembelajaran : pembinaan modul pembelajaran reka bentuk struktur kayu secara interaktif. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mustapa , Rozilaili (2003) Penghasilan buku panduan keselamatan di makmal teknologi pembinaa (Kerja Bata), KUiTTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Musa, Hishamudin (2003) Penghasilan modul keselamatan dan kesihatan pekerja di tapak bina bagi pelajar-pelajar Kejuruteraan Awam Politeknik. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mohd Salleh, Mohd Faizal (2003) Penghasilan modul pembelajaran kendiri Bahan Dan binaan berasaskan web. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mat Seman, Mhd Azmin (2003) Penilaian kesesuaian MPK yang dihasilkan bagi mata pelajaran Undang-undang Binaan (C 532) bagi topik perubahan/pindaan kerja terhadap pelajar semester enam kursus Diploma Ukur Bahan Politeknik Kota Bahru. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Mokhtar, Nurul Syamshida (2003) Persepsi pelajar terhadap penghasilan modul pembelajaran kendiri (MPK) bagi mata pelajaran Pengajian Keusahawanan. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Mohd Yunan, Yusrizal Sufardi (2003) Set borang penilaian prestasi pensyarah. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Muhamad, Hamizan (2003) A study of a problematic injection product, leading to the re-design and improvement of the:mould design and manufacture. Masters thesis, German-Malaysia Institute.

Mohd Alias, Mas Azlina (2003) Penghasilan senarai semak bagi menilai tahap pengetahuan dan pemahaman pelajar terhadap pembelajaran berasaskan multimedia. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Mohd Hasmi, Mohd Hazreel (2003) Tahap kesedaran pelajar tentang isu gangguan seksual dan kesannya terhadap pembelajaran. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mohamad Sani, Ronina Sainira (2003) Kajian keselamatan dalam makmal alam sekitar dan penghasilan buku panduan keselamatan. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mustafa, Zaidah (2003) Pembangunan dan penilaian modul web CD 'baikpulih komputer' : aplikasi dalam makmal baikpulih komputer di Politeknik Malaysia. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mat Sapri, Zarina (2003) Pemilihan kerjaya di kalangan pelajar-pelajar pendidikan khas aliran teknik dan vokasional : satu tinjauan. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Muhammad , Norleeza (2002) Rekabentuk model sistem penjaminan kualiti bagi program pengajian peringkat ijazah yang berasaskan kejuruteraan dan teknologi di sebuah institusi pengajian tinggi. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mohd Taib, Arifah (2002) Mengkaji corak pengurusan masa:kaitannya dengan prestasi akademik dan peribadi pelajar. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Md Yusof, Khairul Azman (2002) Penggunaan modul kejuruteraan jalan raya dalam pengajaran dan pembelajaran: satu kajian di Politeknik Ungku Omar. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Mohd Aripin, Rosilawati (2002) Kecenderungan kerjaya sebagai usahawan di kalangan pelajar bumiputera di Politeknik Sultan Haji Ahmad Shah, Kuantan, Pahang. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mohamad, Ahmad Yusri (2002) Tinjauan terhadap amalan pengurusan masa di kalangan pelajar melayu Diploma Kejuruteraan Awam di politeknik. Masters thesis, Fakulti Teknologi Kejuruteraan.

Mohd Ibrahim, Rahizana (2002) Meninjau kesediaan awal pelajar politeknik sebelum menjalani latihan industri dalam meningkatkan pengetahuan terhadap alam pekerjaan. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Mohd Said, Nor Damsyik (2002) Manual pengajaran berteraskan teknologi kejuruteraan. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Muhammed, Nurazlinda Yahya (2002) Perlaksanaan modul latihan keusahawanan inkubator di Institusi Pendidikan Teknikal:satu kajian eksperimental. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mohd Alwi, Nor Shazlyn (2002) Pembinaan skala dan penentuan tahap pemikiran visual pelajar tahun satu Diploma Kejuruteraan Mekanikal KUiTTHO menggunakan set modul soalan matematik berkaitan trigonometri dan bulatan. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mohd. Nor, Noraishah (2002) Kepuasan kerja dari aspek gaji dan bebanan kerja di kalangan guru:tinjauan di Sekolah Menengah Teknik di Kuala Terengganu. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mukhtar, Affidah Mardziah (2002) Program latihan industri di Kolej Universiti Teknologi Tun Hussein Onn: kajian terhadap perlaksanaan sistem penilaian. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Md Safar, Md Nasir (2002) Aplikasi nilai murni dalam pengajaran: satu kajian di kalangan pensyarah jabatan Kejuruteraan Awam Polimas. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Mohd Noor, Mohd Safirul (2002) Kajian ke atas sikap pelajar dan pensyarah terhadap amalan keselamatan bengkel dan makmal : kajian kes di Politeknik Sultan Abdul Halim Muadzam Shah. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mohamad Jaya, Nur Syamsinar Fadhilah (2002) Kearah cadangan mewujudkan kursus sistem maklumat geografi (GIS) di Politeknik :kajian terhadap faktor-faktor pemilihan kerjaya dalam bidang GIS di kalangan pelajar diploma ukur tanah, Politeknih Sultan Haji Ahmad Shah Kuantan, Pahang. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mat, Rohana (2002) Pembangunan manual pengajaran dan pembelajaran berbantukan teknologi maklumat dan komunikasi ICA Nicenet. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Muhamad Hanafi, Nurfirdawati (2002) Penghasilan dan penilaian modul pengajaran berbantukan komputer bagi mata pelajaran Teknologi Bangunan dan Bahan. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mustapha, Syamsul Affandi (2002) Pengurusan program latihan mengajar yang sistematik dan efisyen : satu tinjauan di KUiTTHO. Masters thesis, Kolej Universiti teknologi Tun Hussein Onn.

Mohd Idris, Nor Rizan (2002) Penilaian terhadap modul pembelajaran pengiklanan (MPP) di Politeknik Port Dickon. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Md. Azali, Siti Fatimah (2002) Penilaian terhadap modul pembelajaran teori kos pengeluaran di Politeknik Port Dickson, Negeri Sembilan. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mohamad Nur, Hanirah (2002) Persepsi pelajar Sarjana Muda Kejuruteraan Elektrik terhadap program latihan industri Kolej Universiti Teknologi Tun Hussein Onn. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mat Isa, Mohd Nizam (2002) Persepsi pensyarah tentang program perkembangan staf (PPS) di Politeknik Sultan Abdul Halim Mu'adzam Shah (POLIMAS). Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Marjuki, Julia (2002) Transparensi sebagai pakej pengajaran:kajian terhadap kesesuaian penggunaan panduan ringkas di Jabatan Kejuruteraan Elektrik Politeknik Johor Bahru. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Mohd Abdoh, Fahrizal (2002) Penyediaan buku panduan keselamatan dan kesihatan di makmal Kejuruteraan Awam Kolej Universiti Teknologi Tun Hussein Onn (KUiTTHO). Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mohd Safie, Noor Syaheeda (2002) Pembangunan modul latihan amali bagi topik mosek foto udara. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mustapha, Mohd Musnizam (2001) Masalah-masalah yang dihadapi dan pengaruhnya terhadap pencapaian pembelajaran di Kolej Universiti Teknologi Tun Hussein Onn: satu kajian. Masters thesis, Kolej Universiti Teknologi Ton Hussein Onn.

Musa, Laila (2001) Persepsi pelajar Diploma Akauntansi terhadap program latihan industri : tinjauan di Politeknik Sultan Abdul Halim Mu'adzam Shah, Jitra, Kedah Darul Aman. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mohd Ariffin, Juliana (2001) Penggunaan internet dan multimedia dalam proses pengajaran di kalangan pensyarah:satu tinjauan di Politeknik Shah Alam. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Md. Adnan, Admawati (2001) Tinjauan keatas pola nilai, kepercayaan dan motivasi yang dihayati oleh pelajar KUiTTHO :satu kajian kes ke atas pelajar semester pertama program diploma kejuruteraan sesi 2001/2002 di Kolej Universiti Teknologi Tun Hussein Onn. Masters thesis, Institut Teknologi Tun Hussein Onn.

Md. Alias, Rodzaida (2001) Kesesuaian perniagaan kepada peniaga-peniaga kecil bumiputera:satu tinjauan pendapat perkembangan perniagaan peruncitan peniaga-peniaga kecil di luar bandar ke arah penyediaan kursus-kursus keusahawanan. Masters thesis, Institut Teknologi Tun Hussein Onn.

Mohamood, Maziharita (2001) Persepsi usahawan industri kecil bumiputera terhadap aspek perlaksaan strategi pemasaran :satu tinjauan di Parit Raja, Batu Pahat, Johor. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mohammad Noor, Noorman Farid (2001) Amalan penggunaan internet di kalangan pelajar Sarjana Muda Kolej Universiti Teknologi Tun HUssein Onn (KUiTTHO). Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mohamad Hassan, Hasmida (2001) Ciri-ciri sistem perisian perakaunan yang diperlukan oleh pihak industri. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Mohd @ Basri, Masreta (2001) Kajian kaedah pengajaran & pembelajaran melalui teknologi maklumat & multimedia (kes meninjau tahap penguasaan pensyarah dan penerimaan pelajar di Politeknik Shah Alam). Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mohemd Tarip@Mohamed Tarikh, Mahya (2001) Kajian motivasi ekstrinsik di antara pelajar lepasan sijil dan diploma politeknik Jabatan Kejuruteraan Awam. Masters thesis, Institut Teknologi Tun Hussein Onn.

Mohd Nor, Maryana (2001) Kajian terhadap perspektif pelajar Sarjana Pendidikan (Teknik dan Vokasional) mengenai kualiti makanan yang dijual oleh pengusaha makanan di kantik Kolej Universiti Teknologi Tun Hussein Onn : satu kajian kes. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Madros, Suhaila (2001) Kemahiran menggunakan perisian perakaunan sebagai persediaan ke alam pekerjaan: satu tinjauan terhadap pelajar-pelajar diploma akauntansi di Politeknik Port Dickson. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Mokhtaruddin, Suraya Akmar (2001) Kemahiran yang diperlukan untuk menceburi industri perbankan. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Mohmad Som, Maizah (2001) Kepentingan mata pelajaran kokurikulum di kalangan pelajar institusi pengajian tinggi : tinjauan ke atas pelajar tahun akhir Ijazah Sarjana Muda Kejuruteraan Elektrik di KUiTTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mohamed, Md. Ashraf (2001) Penggunaan media elektronik dalam pembelajaran: tinjauan terhadap kemahiran penggunaan internet di kalangan pelajar Sarjana Pendidikan KUiTTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mat Nor, Nor Hayati (2001) Persepsi pelajar, guru dan pihak pengurusan sekolah terhadap perlaksanaan program sijil kemahiran : satu tinjauan di dua buah sekolah teknik di Johor. Masters thesis, Institut Teknologi Tun Hussein Onn.

Mohd Salleh, Azlini (2001) Tinjauan hala tuju pelajar-pelajar Diploma Teknologi Maklumat di Politeknik Seberang Perai setelah tamat pengajian. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mansor, Masriaini (2001) Tinjauan terhadap faktor-faktor yang berkaitan pemilihan kerjaya pelajar-pelajar Sekolah Menengah Teknik Batu Pahat. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Muhamad, Ahmad Tarmizi and Ramli, Azlan and Nordin, Anuar (2001) Persepsi pelajar sarjana pendidikan KUiTTHO semester pertama terhadap pembelajaran berasaskan web. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mohd Nawi, Damaisari (2001) Persepsi pelajar terhadap profesion perguruan (satu tinjauan ke atas pelajar Sarjana Pendidikan Teknikal Kolej Universiti Teknologi Tun Hussein Onn (KUiTTHO). Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mohd Amin, Aiza Shairyna and Ariffin, Asiah and Md Jahid, Norliza (2001) Kemampuan motivasi luaran dalam membantu kecemerlangan akademik pelajar : kajian kes terhadap pelajar tahun tiga Ijazah Sarjana Muda Sains Kejuruteraan Awam dengan CPA 3.00 di KUiTTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mohamed Zan, Noorol padzilah and Sharuddin, Hazila and Razak@Ali, Linawati (2001) Persepsi para pensyarah terhadap peranan kepimpinan pengajaran ketua jabatan dalam mempengaruhi prestasi pencapaian akademik para pelajar:satu kajian. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Musta'amal @ Jamal, Aede Hatib and Mohd Arish, Ahmad Kamal (1999) Pembentukan modus operandi bagi menangani masalah budaya samseng dan salah laku sosial di sekolah : tiga sekolah sampel di dalam daerah Batu Pahat. Masters thesis, Institut Teknologi Tun Hussein Onn.

N

Nemmang, Mohd Shafie (2017) Development of vehicle lane changing model within U-turn facilities. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Nazari, Ain (2017) Kaedah pengesanan automatik salur darah retina untuk imej digital fundus. PhD thesis, Universiti Kebangsaan Malaysia.

Ngadengon@Ngadungon , Rafidah (2017) Modified multirate output feedback based discrete sliding mode control for input chattering reduction. PhD thesis, Universiti Teknologi Malaysia.

Noh@Seth , Nur Hazirah (2017) Parametric study on the design of baffle for three-dimensional turning diffuser. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Naseem, Rashid (2017) An improved hierarchical clustering combination approach for software modularization. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Nordin, Normayati (2016) Performance investigation of turning diffusers at various geometrical and operating parameters. PhD thesis, Universiti Teknologi PETRONAS (UTP).

Naser Frak, Anwar (2016) Comparison study on sorting techniques in static data structure. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Nezere, Norhafizan (2016) Analisis penyerapan pembebanan serong terhadap tiub hibrid menggunakan kaedah unsur terhingga. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Naser Frak, Anwar (2016) Comparison study of sorting techniques in static data structure. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Noranai, Zamri (2016) Development of thermal energy storage simulation and modelling for high capacity building. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Nser Brka, Mostafa (2015) Comparative study on correctness and time taken of test case generation using EFG and BXT techniques for GUI application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Nordin , Nor Isha (2015) Effect analysis of reliability, availability, maintainability and safety (rams) of train operation. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Naidu, Dineshwaran (2015) Investigation of vehicle body radiation pattern as an antenna transmission system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Nursal, Ridwan Saputra (2015) Performance and emissions characteristics of alternative biodiesel fuel on 4-stroke marine diesel engine. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Nayan, Hazila (2015) Evaluation of energy conversion and storage systems for vehicle's wind turbine. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ng, Lee Shan (2015) Pelaksanaan dasar pengurusan sisa pepejal negara dalam kalangan kontraktor industri pembinaan di Pulau Pinang. Masters thesis, University Tun Hussein Onn Malaysia.

Nik Mahmod, Nik Firdaus (2015) Smartphone-based robot control for localisation. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Nawawi, Azli (2015) A modified technique in RFID networking planning and optimization. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Noraini, Nor Mohd Razif (2015) Comparative study of indoor air contaminants in different stages of new building occupancy: work environment assessment. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Nasser Al-Ameri, Salem Mgammal Awadh (2015) Effect of bio-degradable recycled material based soil additive for grounding resistance improvement. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Nik Soh @ Nik Othman, Nik Zulkarnain (2015) Kualiti kepimpinan dalam kalangan penyelaras homestay: perspektif pengusaha homestay. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Nasir, Nurul Fitriah (2015) Pemodelan dan pengoptimuman proses biodiesel selanjar dan sesekumpul menggunakan mangkin homogen dan heterogen. PhD thesis, Universiti Kebangsaan Malaysia.

Nordin, Nurul Syakeera (2015) Physicochemical properties of Batu Pahat clay using electrokinetic stabilisation method. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Nor, Maria Elena (2014) Error magnitude and directional accuracy for time series forecasting evaluation. PhD thesis, Universiti Teknologi Malaysia.

Nor Azmuddin, Hafizah (2014) Air breakdown characteristics in rod-plane and sphere-plane electrode configuration under lightning impulse. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Nalathambi, Deenesh Kumar (2014) Air flow profile evaluation around moving vehicle. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Noh, Muhamed Fauzie (2014) Design of fuzzy controller of induction motor for electric vehicle application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Nusrat, Ahmed Ibrahem (2014) Inverter controller using synchronous generator mathematical model. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ngadman, Ngadman (2014) Kajian terhadap model kampus lestari universiti awam di Malaysia: suatu pendekatan terintegratif. PhD thesis, Universiti Kebangsaan Malaysia.

Ngasiman, Nurulhuda (2014) Kesan kaedah pembelajaran koperatif terhadap pencapaian pelajar dalam mata pelajaran matematik. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Nik Ismail, Nik Mohd Asri (2014) Optimisation of microwave system for rice treatment. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Nik Ismail, Nik Ainun (2014) Stress intensity factors of edge cracks in dissimilar joint plates. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Nagapan, Sasitharan (2014) Structural modelling of cause and effect factors of construction waste generation in Malaysian construction industry. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Nordin, Norhuzayanti (2013) Kesediaan bakal guru DPLI terhadap kursus elektromekanikal untuk mengajar di sekolah menengah: kajian di UTHM. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ng, Ban Huat (2013) Development of energy-efficient building environmental quality evaluation framework. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Nik Mustaffa, Nik Khatijah (2013) Dual mode microstrip open loop resonator and filter for wireless LAN applications. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Nik Supian, Nik Mohd Azri (2013) Sensitivity study on influencing parameters of transformer thermal model with directed oil flow. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ng, Chee Seng (2013) A study of the effectiveness of local exhaust ventilation (LEV) in training facilities building using computational fluid dynamics (CFD) approach. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Nongkang , Jumriani (2013) A study on credit evaluation of power consumer based on the Topsis and AHP method. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Noh@Seth, Nur Hazirah (2012) Investigation of uniformity and pressure recovery in turning diffuser by means of baffles. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Nai Chian, Voravit (2012) Meat color recognition using machine vision. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Nordin , Shah Rul Anuar (2012) Pemikiran politik Islam di Aceh pada abad ke 17 M: kajian perbandingan antara Kitab Taj Al-Salatin, Sulalah Al-Salatin dan Bustan Al-Salatin. PhD thesis, Universiti Kebangsaan Malaysia.

Nik Yusuf, Nik Alnur Auli (2011) Bio, thermal and photo degradation of polymer thin films from renewable resources. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Nayan, Nafarizal and Saim, Hashim and Tengku Ibrahim, Tengku Nadzlin and Mahmod, Mohamad Rusop and Hashim, Uda (2011) Characterization and optimization of metal and metal oxide thin films fabricated by high-pressure magnetron sputtering deposition technique. Other thesis, Universiti Tun Hussein Onn Malaysia.

Ngah Jidin, Norsafarina (2009) Kesan peningkatan beban organik (OLR) dan perubahan nilai pH ke atas efluen industri minyak sawit (EIMS) menggunakan reaktor UASB. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Naan , Siti Nazha (2008) Glass ceiling factor wanita dalam membina kerjaya sebagai jurutera. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Noranai, Zamri (2008) Study of energy efficiency opportunities in UTHM. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ngadiron , Zuraidah (2007) Condition monitoring of electric motor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ngadiron, Zuraidah (2007) Condition monitoring of electrical motor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Nik Yusuff, Nik Azmah (2007) Kualiti perkhidmatan pengurusan Pendidikan Sains dan Matematik dalam Wawasan Pendidikan Negara. PhD thesis, Universiti Kebangsaan Malaysia.

Noor Md Yusoh , Hamidah (2006) Amalan pemakanan yang si h at di kalangan pelajar sekolah menengah teknik. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Nizar, Nurhuda (2006) Ketrampilan kemahiran teknikal graduan Institut Kemahiran Belia Negara (IKBN). Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Ng, Kok Mun (2006) A graphical method for automatic code generation from extended s-system petri net models. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Ngadimon , Khairulnizam (2006) Design and simulation of hydraulic shaking table. Masters thesis, University of Technology Malaysia.

Ngali, Mohd Zamani (2005) Solution to navier-stokes equation in stretched coordinate system. Masters thesis, Universiti Teknologi Malaysia.

Ngadengon@Ngadungon , Rafidah (2005) A full order sliding mode tracking controller design for an electrohydraulic control system. Masters thesis, Universiti Teknologi Malaysia.

Nasir, Noraziha (2004) Kecekapan dan keperluan pelajar Sarjana Pendidikan Teknik dan Vokasional dalam program latihan mengajar. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Ngah, Hasnah (2004) Tinjauan kelaziman gaya pengajaran pensyarah kejuruteraan menurut perspektif pelajar di Politeknik Sultan Haji Ahmad Shah, Kuantan. Masters thesis, Kolej Universiti teknologi Tun Hussein Onn.

Ngagiman, Norayahati (2003) Pembangunan sistem maklumat pentadbiran di Jabatan Kejuruteraan Awam, POLISAS. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Nayan, Nirwani (2003) Keberkesanan penggunaan modul pembelajaran kendiri bagi tajuk akaun penamat dan kunci kira-kira mata pelajaran perakaunan awalan di Politeknik Sultan Abdul Halim Muad'zam Shah, Jitra Kedah. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Ng, Chuan Huat (2003) Sistem rekabentuk corak dan acuan pinggan. Masters thesis, Universiti Teknologi Malaysia.

Nordin, Adzuieen (2003) Pendidikan teknik dan vokasional ke arah pendidikan bertaraf dunia : dalam konteks pengajaran dan pembelajaran. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Ngatiran, Norida (2003) Penghasilan dan penilaian buku panduan prosedur pematerian komponen elektronik. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Nordin, Surina (2003) Satu kajian kes mengenai permasalahan pembelajaran pelajar tingkatan 5 kursus katering di Sekolah Menengah Teknik Tanah Merah : ke arah pembinaan modul air rebusan, sup, sos dan kuah. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Nordin, Mohd Zahari (2002) Penglibatan usahawan dalam perlaksanaan kerja kecil di Majlis Perbandaran Batu Pahat :satu kajian kes. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Nasroddin, Syafarizan (2002) Kaedah pendaftaran latihan industri secara berkomputer. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Noruzaman, Ainul Haezah (2002) Perlaksanaan pengajaran dan pembelajaran mata pelajaran teknikal secara "online " di kalangan pelajar Kejuruteraan Awam di KUiTTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Nazeri, Nour Azira (2001) Kajian terhadap pelaksanaan "nilai murni merentasi kurikulum" di KUiTTHO : satu kajian di kalangan pensyarah Fakulti Teknologi Kejuruteraan. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Nik Pa, Nik Hasnira (2001) Penghijrahan pekerja bidang teknikal ke bidang pendidikan : satu kajian kes. Masters thesis, Kolej Universiti teknologi Tun Hussein Onn.

O

Omer Ba-Saleem, Omer Mohamed (2018) Depth estimation from 3D reconstructed scene using stereo vision. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Othman, Azlina (2018) Design and implementation of a 2.4 GHz embedded RFID system for fruit maturity evaluation for agricultural industries utilizing wireless mesh sensor network. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Osman, Mustafe Adam (2018) Feasibility study of renewable energy-based microgrid hybrid system in Berbera Somaliland. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Othman, Norliza (2017) Implementation of Luo-Rudy phase I cardiac cell excitation model in FPGA. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Omar, Roslan (2017) Mass transfer of Cd, Hg, As, DDT and chlordane by adsorption onto granular activated carbon. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Othman, Nurhidayah (2017) Persepsi terhadap sistem pembelajaran elektronik dalam kalangan pelajar Kolej Poly-Tech Mara Batu Pahat. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Omar, Nurul Aswa (2017) A hybrid semantic similarity feature-based to support multiple ontologies. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Oluyinka, Solomon Ayodele (2017) The role of trust as a mediator in the relationship between technology factors and intention to accept internet banking in Nigeria. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Omar, Mohd Fairoz (2016) Development of a new single-phase field excitation flux switching motor topology with segmental rotor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Othman, Afinde (2016) Pengetahuan, kemahiran dan amalan guru membina item kemahiran berfikir aras tinggi (KBAT) dalam instrumen pentaksiran pembelajaran. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Omar, Abdul Halim (2015) Improving the accuracy of text document clustering based on syngram algorithm. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Othman, Adib (2015) Non-ionizing electromagnetic radiation effects on the action potential in human arm electrical model. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Olaiya, Mudashir Gafar (2015) The impact of entrepreneurship educations on entrepreneurial capacity and self-employment. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Omar Kamal, Shahrul Nahar (2015) Analysis of performance and emission of different gasoline fuel on small duty engine at various ambient temperatures. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Othoman, Mohamad Asyraf (2015) Effect of sun radiation exposure on indoor air quality of car interior in tropical country. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Osman, Zafrul Azman (2015) Real time monitoring for tank level based on isa 100.11a using star topology. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Othman, Mohd Hilmi (2015) The modelling of processing conditions for polypropylene-nanoclay integral hinges at high heat exposure. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Omar, Siti Sarah (2015) The exploratory study of the entrepreneurial network of Malaysian Bumiputera entrepreneurs: cases of small firms in the southern region of Malaysia. PhD thesis, University of Southampton.

Onalo Joan Iye, Onalo Joan Iye (2015) Bioremediation of heavy metal polluted water using immobilized freshwater green microalga, botryococcus sp. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ong, Tze Ching (2015) Modelling and simulation of drying process for ceramic membrane fabrication. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Othman, Muhaini (2015) Spatial-temporal data modelling and processing for personalised decision support. PhD thesis, Auckland University of Technology.

Othman, Mohd Hilmi (2015) The modelling of processing conditions for polypropylene-nanoclay integral hinges at high heat exposure. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Osman, Shahrul Azmir (2014) Characterization of A C.I. engine operated using retrofit monogas fuelling concept. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Osman, Shahrul Azmir (2014) Characterization of a C.I. engine operated using retrofit monogas fuelling concept. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Othman, Nurmiza (2014) Magnetic nanoparticle imaging for biomedical applications. PhD thesis, Kyushu University.

Omar, Hawa (2014) Hubungan antara tingkah laku asertif dengan komitmen organisasi dalam kalangan staf sokongan Universiti Tun Hussein Onn Malaysia (UTHM). PhD thesis, Universiti Teknologi Malaysia.

Othman, Mohd Syafiq Salman (2014) Investigating flush system method for minimum water usage of toilet system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Othman, Mohd. Ashraf (2014) New process of developing nanocrystalline FeCr for fuel cell application. Other thesis, Universiti Tun Hussein Onn Malaysia.

Omar Aashour, Omar Ali (2014) P-resonant control for the neutral point of three phase inverter. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Omar, Zakaria (2014) Pendekatan konstruktif dalam inovasi pengajaran dan pembelajaran Bahasa Melayu di kolej vokasional. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Othman, Noor Mala (2014) Pengaruh tahap stres terhadap kepuasan kerja dalam kalangan pengajar kolej vokasional di Negeri Pahang. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Obied, Ahmed Saeed (2014) Performance and analysis of resource allocation in IEEE802.16E and IEEE802.16M Wimax model systems. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Othman, Nurul Hasanah (2014) System identification of heat exchanger using generalized poisson moment functional (GPMF). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Oon, Syahira Raihan (2013) Lifetime prediction and estimation of power transformer. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Othman, Mazihah (2013) Analisis keperluan pelajar, guru dan kandungan untuk pembangunan e-bahan instruksional mata pelajaran Pengajian Kejuruteraan Elektrik Dan Elektronik tingkatan empat : satu kajian kes kualitatif. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ong, Hui Niang (2013) Fractal koch antenna for indoor TV and FM reception. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Othman, Emad. A. (2013) Improvement of routing protocol in wireless sensor network for energy consumption to maximize network lifetime. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Omar, Nurhanum (2013) Path planning algorithm for a car-like robot based on cell decomposition method. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Othman , Ibtesam. A. (2013) Uplink channel power control improvement in DS-CDMA system using channel predictions. Masters thesis, Universiti Tun Hussein Onn Malaysia.

O. Almarghani, Khaled Ali. (2012) Detection and tracking for radar simulation using MATLAB. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Othman, Maisara (2012) High dimensional modulation and MIMO techniques for access networks. PhD thesis, DTU Chemical Engineering.

Othman, Hussain and Abdul Rahim, Mohd Hisyam and Ahmad, Shakila and Rusdi, Mikdar and Afkari, Rafiuddin (2012) Huruf baharu mewakili bunyi "eks" dalam sistem tulisan jawi. Other thesis, Universiti Tun Hussein Onn Malaysia.

Osman, Mohamad Hairi (2012) Performance of reinforced concrete beam-column joint subjected to repeated reversed load. Other thesis, Universiti Tun Hussein Onn Malaysia.

Ong, Sylvia Ai Ling (2012) SNR estimation using extended kalman filter technique for orthogonal frequency division multiplexing (OFDM) system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Othman, Maidatulakmal (2012) Tahap kompetensi pelajar melaksanakan kerja amamli berpandukan Domain Psikomotor Simpson. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Omar, Gadaffi (2012) Voltage tracking of a DC-DC buck-boost converter using Gaussian Fuzzy logic control. Masters thesis, Universiti Tun Hussein Onn Malaysia.

O. Elojali , Otman Mohamed (2011) Water reticulation model for Taman Maju, Parit Raja. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Om Balkou , Mhimed Ramadan (2011) Computational study of shear strengthened of RC continuous beam using CFRP sheet with different wrapping scheme. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Omar, Badrul and Siswanto, Waluyo Adi and Anggono, Agus Dwi (2011) Development of a robust method to accomodate springback distortion in multistage sheet metal forming. Other thesis, Universiti Tun Hussein Onn Malaysia.

Omar, Rosli (2011) Path planning for unmanned aerial vehicles using visibility line-based methods. PhD thesis, University of Leicester.

Othman, Norzila (2010) Polycyclic aromatic hydrocarbons biodegradation using isolated strains under indigenous condition. PhD thesis, Universiti Teknologi MARA.

Ong , Joo Hun (2008) Development of a genetic algorithm controller for cartesian robot. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Omar, Azhanie (2008) Penerapan nilai - nilai murni dalam kalangan pelajar sarjana muda pendidikan teknik dan vokasional semasa menjalankan amali di makmal. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Othman , Wan Zulkarnain (2008) Improvement of screw press production in palm oil using fuzzy logic system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Omar, Badrul (2008) A fuzzy approach to support dfa evaluation of design concepts. PhD thesis, The University of Leeds.

Othman , Mohd Hilmi (2008) Injection moulding and thermal properties of polypropylene hinges. Masters thesis, Loughborough University.

Othman, Rosnida (2007) Cabaran-cabaran untuk membina kerjaya dalam bidang perakaunan di kalangan pelajar Diploma Akauntansi politeknik. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Othman , Mohd Khair (2007) Design and development of an IAGA compliant magnetic observatory. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Othman, Hussain (2006) Malay concept of history as understood from the classical Malay historical texts. PhD thesis, Universiti Islam Antarabangsa.

Othman, Muhaini (2005) Faculty's used books e-platform. Masters thesis, Universiti Malaya.

Othman , Zulhairi (2005) Comparison of RLL, state diagram, Grafcet and Petri net for the realization of logic controller. Masters thesis, Kolej Universiti Teknologi Tun Hussein.

Othman , Safiah (2005) A numerical study of transient natural convection of water near its density extremum. Masters thesis, University of Strathclyde.

Ong, Tze Ching (2003) Pembangunan multimedia cakera padat untuk mata pelajaran sains bahan. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Othman, Asri (2003) Penghasilan modul e-pembelajaran : "Pembinaan Jalan Raya". Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Omar, Darvina (2003) Pembangunan dan penilaian bahan pembelajaran berbantukan komputer (PBK) berasaskan CD interaktif bagi mata pelajaran pemasaran 1 di politeknik. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Ong, Sylvia Ai Ling (2003) Development and evaluation of a fibre optic web-based learning module for technology-based learners. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Othman, Aneetha Asyikeen (2003) Pembangunan dan penilaian sistem penempatan program latihan mengajar secara online. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Othman, Aida Syariza (2003) Penghasilan modul pembelajaran kendiri pengajian Kejuruteraan Mekanikal: mekanik bagi pelajar Kejuruteraan Mekanikal, Sekolah Menengah Teknik Dato' Lela Maharaja Rembau. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Othman, Khairul Bariyah (2003) Kriteria penilaian bagi perisian pendidikan untuk pengajaran dan pembelajaran berbantukan komputer : satu tinjauan di Sekolah Menengah Teknik di negeri Kedah. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Othman, Razimah (2003) Penghasilan modul amalan keselamatan bagi meningkatkan tahap kesedaran pelajar di dalam makmal teknologi pembinaan (kerja kayu & perabot) di KUiTTHO). Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Omar Baki, Mohamad Faezal (2003) Study on relationship between burr and cutting clearance of commonly used sheet metals in automotive industry in Malaysia in relation to piercing and blanking processes. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Osman, Zuraida (2003) Satu tinjauan perspektif pengurus terhadap k-workers. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Omar, Faizah (2002) Keberkesanan pembelajaran secara kolaboratif terhadap prestasi matapelajaran pengurusan perniagaan (P315) pelajar sijil simpan kira semester 4 di Politeknik Seberang Perai. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Othman, Malisa (2002) Penggunaan laman web di dalam proses pengajaran dan pembelajaran subjek Pelancongan Rekreasi (H310) :satu tinjauan di kalangan pelajar Pengurusan Pelancongan, Politeknik Johor Bahru. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Osman, Hanizah (2002) Pemantapan penilaian pembimbing dalam program latihan mengajar di Kolej Universiti Teknologi Tun Hussein Onn (KUiTTHO). Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Othman, Nooraza (2001) Aplikasi penggunaan perkhidmatan pembelajaran berasaskan web (PBW) menerusi perisian 'Blackboard 5' di kalangan pelajar Sarjana Pendidikan (Teknikal). Masters thesis, Fakulti Teknologi Kejuruteraan.

Osman, Asmiza (2001) Cabaran-cabaran dalam pendidikan yang dihadapi oleh pelajar-pelajar sarjana : tinjauan ke atas pelajar Sarjana Pendidikan (Teknikal) di KUiTTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Omar, Yaakub (2001) Kajian terhadap gaya pembelajaran di kalangan pelajar Politeknik Port Dickson dalam Kursus Diploma Elektronik Perhubungan. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Osman, Kaharudin and Ahmad, Harlinda and Indiran, Logaiswari (2001) Penggunaan strategi pembelajaran pengarahan kendiri di kalangan pelajar-pelajar jurusan perakaunan Jabatan Perdagangan di Politeknik. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Othman, Khairiani and Abd Mutalib, Hafizah and Wan Ismail, Nik Ahmad Rizal (2001) Perspektif pelajar Sarjana Muda Kejuruteraan Mekanikal KUiTTHO terhadap keberkesanan latihan industri. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

P

Pairan, Mohamad Rasidi (2017) Fine nozzle characteristics for increasing filtration efficiency in commercial kitchen hood ventilation system. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Padil, Suhaili (2017) Kerangka kemahiran employability senibina graduan politeknik. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Periyasamy, Raveverma (2017) The feasibility of SBR/EVA and TPU/PCL composite material for fused deposition modelling. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Philimon, Sheena Punai (2016) An alternative means of spectroscopic imaging for superficial wound healing process monitoring. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ponniran, Asmarashid (2016) A study on optimization of circuit components in high boost ratio DC-DC converters with hybrid-based configuration. PhD thesis, Nagaoka University of Technology.

Pratama Putra, Jouvan Chandra (2015) Effects of indoor air quality on the occupant’s health and productivity in an office building. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Puteh, Saifullizam (2014) User profiling in the intelligent office. PhD thesis, Nottingham Trent University.

Paiman, Nuur Azreen (2014) Determination of baseline data on respirable dust concentration for safety and health enhancement in selected small and medium industries in Johor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Pua , Poh Keong (2014) Tahap kemahiran insaniah dalam kalangan pelajar kejuruteraan tahun akhir di Politeknik KPM. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Pindar, Zahraddeen Abubakar (2014) UTHM certificate verification using microtext double check digit. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Pandak Jabo , Nurul Izzati (2013) Safety distance awareness system for Malaysian driver. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Parni, Puspawati (2013) Kecenderungan pelajar Institut Latihan Jabatan Tenaga Manusia dalam menceburi bidang keusahawanan. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Pawi, Soeb (2013) Model pengurusan cukai harta pihak berkuasa tempatan Malaysia. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Pairan, Mohamad Rasidi (2012) A simulation of film cooling in the leading edge region of a turbine blade (trench effect on film effectiveness from cylinder in crossflow). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ponniran, Asmarashid (2012) A reability study on stand-alone electric solar system for domestic usage. Other thesis, Universiti Tun Hussein Onn Malaysia.

Putrasari, Yanuandri (2011) Preparation of nio catalyst on fecral substrate using various techniques at higher oxidation process. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Praptijanto , Achmad (2011) Sonochemistry approach for a new process biodiesel production from Jatropha Curcas oil. Masters thesis, Universiti Tun Hussein Onn Malaysia.

P. Saminathan, Kantan (2008) Computational intelligence method for optimal rotary design system. Masters thesis, Universiti Tun HUssein Onn Malaysia.

Paisan, Mohd Farhan 'Uzair (2008) Tinjauan terhadap kemurungan dalam kalangan pelajar di Universiti Tun Hussein Onn Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Puteh, Fadilah (2005) Pendidikan berterusan dalam peningkatan kompetensi di kalangan profesional organisasi:kajian kes di KUiTTHO. Masters thesis, Fakulti Pengurusan dan Pembangunan Sumber Manusia.

Ponniran, Asmarashid (2005) Study on the performance of underground XLPE cables in service based on Tan Delta and capacitance parameters. Masters thesis, Universiti Teknologi Malaysia.

Pang , Shen Yee (2005) An experimental verification of the binary method for three-phase voltage source inverter. Masters thesis, Kolej Universiti Teknologi Tun Hussein.

Parakkasi, Jaya (2003) Penghasilan dan penilaian modul web CD dalam P&P: Penyenggaraan Jalan Raya. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Po'a , Ayu Wirdawati (2002) Kajian terhadap amalan keselamatan dan kesihatan di Pusat Latihan Teknologi Tinggi (ADTEC) Batu Pahat. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

P. Gomez, Christy (2002) A study of the situated practice of benchmarking in the UK construction industry. PhD thesis, University of Birmingham.

Puteh @ Arif, Nazura (2001) Motivasi kerja di kalangan pensyarah-pensyarah di Fakulti Teknologi Kejuruteraan, Kolej Universiti Teknologi Tun Hussein Onn (KUiTTHO). Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Q

Qasem Rasheda, Hamid Mohammed (2017) Ultra wideband antenna for microwave imaging using modified fractal structure. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Qasem, Musaab AbdulGhani (2016) EMI reduction on high-speed PCB using electromagnetic bandgap structure. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Qazi, Fawad Habib (2016) Effect of green supply chain management practices on sustainability performance of ISO14001 SMEs. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Qadir Bux @ Imran Latif, Qadir Bux @ Imran Latif (2012) Critical impact energy for local impact damage of hard projectile on concrete slab. PhD thesis, Universiti Tun Hussein Onn Malaysia.

R

Raji, Abdulazeez Umar (2017) Competency-driven benefits realization model for minimization of post-contract transaction costs in design-build (D&B) delivery systems. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Rosman, Mohammad Zawawi (2017) Compressibility of solidified dredged marine soils (DMS) by mass treatment. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ramli, Roslinda Hani (2017) Development of chitosan/alginate/silver nanoparticles hydrogel scaffold for soft tissue engineering applications. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Raut, Ashwin Narendra (2017) Development of sustainable material for hybrid wall system to improve indoor thermal performance. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Ramsy, Him (2017) Effect of high injection pressure and ambient temperature on heat release in biodiesel combustion. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Riza, Fetra Venny (2017) Formulation of compressed stabilized earth brick using black uncontrolled burnt rice husk ash as full cement replacement. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Ramli, Fazilah (2017) Housing equilibrium price framework for Malaysian middle class group in affordable housing market. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Risit, Wellson (2017) Identification of biodiesel yield and its properties from microalgae Botryococcus sp isolated at Sembrong dam. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Razali, Azlizul Aizat (2017) Investigation of heat transfer in a microchannel heat sink using water and Al2O3 nanofluids. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Robin, Rolyselra Orbintang (2017) Kajian terhadap kos pembinaan rumah kos rendah di Sarawak. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Rosli, Mohd Arif (2017) Potensi tanah gambut, batu kapur, zeolit dan karbon teraktif sebagai penjerap komposit untuk merawat larut resapan. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Roslan, Nor Atiqah Aima (2017) Service quality through employee knowledge, skills and abilities (KSAs): a study among third party logistics in Iskandar Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Rosli, Naida (2017) An intervention for motorcycle helmet usage based on technology acceptance model. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Razman, Ruzaimah (2017) A model of sustainable campus operations for Malaysian public universities. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Remali, Najihah (2016) Analisis potensi dan pemetaan risiko tsunami di pantai barat semenanjung Malaysia menggunakan sistem maklumat geografi. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ramli, Azizul Azhar (2016) Building dynamic fuzzy regression model based on convex hull algorithm and its industrial applications. PhD thesis, Waseda University, Japan.

Ramli, Noraziah (2016) Keberkesanan pembelajaran koperatif model Student Teams-Achievement Divisions (STAD) dalam fizik terhadap pencapaian pelajar. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Rubani, Siti Nur Kamariah (2016) Pembangunan dan keberkesanan modul perancahan berstruktur dalam pembelajaran berasaskan projek terhadap pengetahuan dan kemahiran bagi projek mesin larik pelajar politeknik. PhD thesis, Universiti Sains Malaysia.

Ribuan , Mohamed Najib (2016) Soft robot with new pneumatic rubber actuators for medical assisting device. PhD thesis, Okayama University, Japan.

Rahmat, Noor Idirah (2016) Success factors for Bumiputra contractors in Malaysia: Johor State. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Rusdi @ Rosdi, Nor Syuhada (2016) Transformasi kurikulum kolej vokasional dalam kesediaan melahirkan k-worker: satu kajian kes Kolej Vokasional Kluang. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Roble, Mustaf Ali (2016) Triple band dipole antenna with harmonic suppression capability. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Rehman Gillani, Syed Muhammad Zubair (2016) An improved bat algorithm with artificial neural networks for classification problems. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Romayne, Anders Hans (2016) A study on single-lap notched woven kenaf reinforced polymer bolted joint under temperature action. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Roslan, Nadzirah (2015) Mitigation measures for controlling time and cost overrun factors. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Rosman, Nurafiqah (2015) Study on the effect of zeolite rice husk particles on polysulfone membrane. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Rahim, Mohammad Zulafif (2015) Research on electrical discharge machining of polycrystalline diamond. PhD thesis, RMIT University.

Ruslan, Norhafizah (2015) Air Polution Index (API) real time monitoring system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ramli, Nur Mardiana (2015) Improvement of power factor in renewable energy system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Rosli, Mohd Eley (2015) Modelling of pad support for foot osteoarthritis. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Reman, Mohamad Rahimie (2015) Noise study on MRT infrastructure construction. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ramli, Mohd Hazlen (2015) Selective laser melting of cobalt chromium molybdenum for 3d implant component. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Razali, Nor Faizah (2015) Development of low fouling membrane using polyaniline (PAN1)-polyethersulfone (PES) blend. PhD thesis, Universiti Kebangsaan Malaysia.

Rahamat, Lily Afizah (2015) Effect of double stratification on boundary layer flow and heat of nanofluid over a vertical plate in the presence of chemical reaction. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Rahil, Mousa (2015) Export market orientation, organizational knowledge and export market performance: the mediating effect of organizational innovation. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Ramli, Hafiza Hani (2015) Kepelbagaian kemahiran dan kesan terhadap prestasi kerja pegawai tadbir di Universiti Tun Hussein Onn Malaysia (UTHM). Masters thesis, Universiti Malaya.

Rahim, Mohd Bekri (2015) Pembinaan model E-portfolio pensijilan kemahiran Malaysia. PhD thesis, Universiti Kebangsaan Malaysia.

Ramlee, Normarina (2015) Tahap stres dalam kalangan pensyarah kolej vokasional di Johor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Rajendran, Punitha (2015) The impact of building information modeling (BIM) to architectural design process. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Radzi, Mohd Fhaizal (2014) Effect of various rotor pole number of field excitation flux switching motor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Rahmat, Siti Nazahiyah (2014) Methodology for development of drought severity-duration-frequency (SDF) curves. Masters thesis, RMIT University.

Roslan, Muhammad Asyraf (2014) Flexural behaviour of fibre reinforced concrete beams containing polyethylene terephthalate (PET) wastes. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Rosdi, Hairierosniza (2014) Air breakdown characteristics in plane-plane and sphere gap electrode configuration under lightning impulse. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ramli, Azuin (2014) Development and validation of a safety and health performance model for low cost housing. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Razali, Siti Nurshahizan (2014) Gaya keibubapaan terhadap pencapaian akademik pelajar sekolah menengah. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Rasmin, Kasmawati (2014) Planning and impact of distributed generation in SESB existing system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Rashid, Rina (2014) Reliable power system operation plan - steady state contingency analysis. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Rosmera, Norshazwani Afiqah (2014) The construction of house price index: modelling by incorporating absolute location. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ramli, Sofwan (2013) Design and simulation by using Smart Power Module (SPM) to increase efficiency in motor drive application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Rejab, Muhammad Nazri (2013) Finite element analysis of mechanical properties for 2D woven Kenaf composite. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Rase, Rasima (2013) Kesediaan pensyarah politeknik menggunakan pendekatan m-pembelajaran dalam pengajaran dan pembelajaran di Negeri Johor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Roslan, Nor Effyza (2013) Pelaksanaan transformasi program pendidikan asas vokasional di sekolah menengah kementerian pelajaran Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Rakiman, Umol Syamsyul (2013) Production line: effect of different inspection station allocation under accepts reject inspection policy. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Rakiman, Umol Syamsyul and Bon, Abdul Talib (2013) Production line: effect of different inspection station allocation under accepts reject inspection policy. Other thesis, Universiti Tun Hussein Onn Malaysia.

Rasdi, Normalina (2013) A novel technique for non-interuppted replacement ups system with the integration of portable transfer switch (PTS). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Razman, Ruzaimah (2012) Thermal performance of residential house using interlocking compressed earth brick (ICEB) as an alternative wall material. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ramlee, Nor Asrina (2012) Detection of voltage disturbances in power quality using wavelet transforms. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Rusiman, Mohd Saifullah (2012) On the use of fuzzy c-regression truncated models for health indicator in intensive care unit. PhD thesis, Universiti Teknologi Malaysia.

Roddin, Rohayu (2012) Pendekatan model baru pembangunan usahawan wanita luar bandar bagi tujuan pembasmian kemiskinan. Other thesis, Universiti Tun Hussein Onn Malaysia.

Rehman Gillani, Syed Muhammad Zubair (2012) Predicting noise-induced hearing loss (NIHL) in TNB workers using GDAM Algorithm. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ramlan , Aslinda (2012) Study on characteristics behavior of developing nozzle for aerosol spray. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Romeli, Norfarhana (2012) Tahap kemahiran berfikir kreatif dan kritis dalam kalangan Pelajar Diploma Pendidikan Lepasan Ijazah Universiti Tun Hussein Onn Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ramli, Mohd Zakwan (2011) Development of accident prediction model by using artificial neural network (ANN). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Raja Aris, Raja Siti Nur Adiimah (2011) Simulation of a variable speed brushless DC motor using neural network controller. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ramadan Dofan , Jamal Ali (2011) Study on thermal model for calculating transformer hot spot temperature. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Riyadi Yanto , Iwan Tri (2011) Rough clustering for web transactions. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Razali, Maimunah (2011) Classification and identification of power quality events using ANOVA and wavelet transform. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Radin Mohamed, Radin Maya Saphira (2011) Environmental impacts of greywater use for irrigation on home gardens. PhD thesis, Murdoch University.

Ramli, Khairun Nidzam (2011) Modeling and analysis of complex electromagnetic problems using FDTD subgridding in hybrid computational methods. PhD thesis, University of Bradford.

Rashidi, Ramli (2011) The framework for effective collaboration between public training institutions and private industries in the context of National Dual Training System (NDTS) environment in Malaysia. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Razali , Nor Faizah (2008) Effects of salt concentration on vapor-liquid equilibrium (VLE) of azeotropic mixture in ultrasonic distillation system. Masters thesis, Universiti Teknologi Malaysia.

Ruslee, Ruslinda (2008) Anti - swing control strategy for automatic 3 DOR crane system using FLC. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Razak, Nor Rafidah (2008) Penerapan kemahiran insaniah melalui pembelajaran koperatif dalam mata pelajaran pengurusan kokurikulum di Fakulti Pendidikan Teknikal. Masters thesis, Universiti Tun Hussein Onn Malaysia.

R., Kasim and K., K. Alexander, and J., J. Hudson (2008) A choice of research strategy for identifying community-based action skill requirements in the process of delivering housing market renewal. PhD thesis, University of Salford.

Ribuan , Mohamed Najib (2007) Sonar sensor for an autonomous mobile robot. Masters thesis, Newcastle University.

Rifai , Damhuji (2006) Simulation, fabrication and characterization of NMOS transistor. Masters thesis, Kolej Universiti Teknologi Tun Hussein.

Razali, Hairani (2006) Kesan latihan dalam perkhidmatan ke atas kualiti pengajaran dam pembelajran dalam bidang teknik dan vokasional. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Rahmat, Siti Nazahiyah (2005) Modeling of non point source pollution from residental and commercial catchments in Skudai, Johor. Masters thesis, Universiti Teknologi Malaysia.

Ramlan, Rohaizan (2005) Penilaian kaedah laluan terpendek : rangkaian jalan raya kajian kes : Negeri Johor dan Melaka. Masters thesis, Universiti Teknologi Malaysia.

Ridzuan, Mohd Baharudin (2005) Pengolahan kandungan logam berat daripada tanah yang diaplikasi dengan enapcemar domestik melalui kaedah tanah pertanian. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Ramli, Khairun Nidzam (2004) Prestasi dan perlaksanaan kawalan kuasa untuk sistem W-CDMA. Masters thesis, Universiti Kebangsaan Malaysia.

Rashid, Farawaheeda (2004) Satu model awal jaminan kualiti bagi pendidikan berterusan kejuruteraan di Kolej Universiti Teknologi Tun Hussein Onn (KUiTTHO). Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Raja Ahmad, Raja Nadia (2004) Penghasilan e-album untuk proses rawatan air sebagai medium pengajaran dan pembelajaran bagi matapelajaran kejuruteraan bekalan air dan air sisa. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Rosli, Norlini (2004) Tinjauan kesesuaian perisian interaktif yang dibina berdasarkan papan cerita bagi topik Pengenalan Kepada Multimedia. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Rosdi, Mariana (2004) Pembangunan CD ROM interaktif bagi tajuk ECG Library Interactive. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Rubayee, Norazurah (2003) Penghasilan manual teknik penggunaan kaedah simulasi(TPKS) di bilik darjah dalam proses pengajaran dan pembelajaran bagi matapelajaran perniagaan di politeknik. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Ramli, Liza Suhana (2003) Penghasilan modul pembelajaran bahan kejuruteraan awam bagi kursus Ijazah Sarjana Muda Kejuruteraan Awam Kolej Universiti Teknologi Tun Hussein Onn. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Ramli, Azuin (2003) Pembangunan modul pembelajaran kendiri pendidikan alam sekitar bagi pelajar sekolah menengah. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Rusli, Rusdi (2003) Pembinaan laman web teknik melukis pelan bangunan dengan AutoCAD2000 dalam proses pengajaran dan pembelajaran subjek lukisan kejuruteraan. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Rali, Nurazura (2003) Hubungan perlaksanaan kurikulum dengan kompetensi graduan Kejuruteraan Awam lepasan KUiTTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Rezali @ Abdul Sukor, Norzianis (2003) Sistem penilaian prestasi ke arah mencapai pentadbiran berkualiti : satu kajian. Masters thesis, Kolej Universiti teknologi Tun Hussein Onn.

Rahmat, Nor Rasyida (2003) Penghasilan modul pengajaran guru bagi mata pelajaran sejarah. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Rajamanickam , Segar (2003) Potensi keterlibatan pelajar kejuruteraan elektrik semester akhir KUiTTHO dalam bidang keusahawanan. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Ramlee , Kembek (2003) Modul Pembelajaran Kendiri (MPK) bagi matapelajaran Perakaunan Kewangan 2 dalam tajuk Perkongsian 1 untuk pelajar kursus Diploma Akauntansi semester 3 di Politeknik Ungku Omar. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Ramli, Anis Safinaz (2003) Penghasilan sistem pemasaran program pendidikan berterusan (e-pemasaran) berasaskan web bagi unit pendidikan berterusan KUITTHO : kajian kebolehgunaan di KUiTTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Razik, Muhammad Ashlyzan (2002) Pengaruh motivasi dan kesannya terhadap prestasi akademik : tinjauan terhadap pelajar Sarjana Muda Kejuruteraan Mekanikal sesi 1999/2000 KUiTTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Raja Sulaiman, Raja Mahani (2002) Tinjauan terhadap gaya pembelajaran di kalangan pelajar-pelajar semester tiga tahun 2002 Diploma Akauntansi di Politeknik Sultan Haji Ahmad Shah, Kuantan, Pahang. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Rosli, Rozita Halina (2001) Faktor-faktor kekangan penggunaan teknologi pendidikan dalam pengajaran dan pembelajaran di kalangan guru-guru sekolah menengah Daerah Bentong, Pahang Darul Makmur. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Ramdas @ Chelamuthu , Murugadas (2001) Penghasilan dan penilaian modul pembelajaran kadar kendiri (MPKK) bagi meningkatkan penggunaan statistik dalam penyelidikan di kalangan pensyarah Jabatan Pendidikan Teknik dan Vokasional (JPTV) KUiTTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

S

Shaari, Jamil (2018) Electric field and space charge characteristics of XLPE insulation doped with nanofillers. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sulakah, Siti Masrah (2017) Aplikasi Padlet dalam pengajaran dan pembelajaran komponen sastera (KOMSAS). Masters thesis, Universiti Tun Hussein Onn Malaysia.

S. M. Johan, Muhammad Haniff (2017) Assessment on blood flow velocity using doppler technique for circulatory system diagnosis at left ventricle (LV) of the heart. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Selimin, Mohamad Ali (2017) Characterisation and in vitro bioactivity of anodised titanium and hydroxyapatite as implants for biomedical application. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Shukri, Muhammad Shazwan (2017) Collapsibility behaviour of ABS P400 and PMMA used as sacrificial pattern in direct investment casting process. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Subramaniam, Menega (2017) Comparative study on indoor fungi growth incorporated with different antifungal and wall finishings. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sulaiman, Nurul Nabila (2017) Determination of corporate real estate composition and performance for selected Malaysian public listed companies. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Shaari, Muhammad Farid (2017) Development and characterization of the ionic polymer metal composite actuated contractile water jet thruster. PhD thesis, Universiti Sains Malaysia.

Sidek, Azmi (2017) FPGA-based implementation of electronic abacus using Altera DE2 board. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Saad Sheggaf, Zayad Mohamed (2017) Investigation of the effect of rare earth additives on solidification of as-cast ZRE1 magnesium alloy. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Suhani, Noorain (2017) Kitchen wastewater treatment by adsorption process using banana trunk fibers (Musa Sapientum) and chitosan. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Seswoya, Roslinda (2017) Methane recovery from digesting domestic mixed sewage sludge. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Sairi, Nurul Afiqah (2017) Persepsi industri hospitaliti terhadap golongan pekerja berkeperluan khas (masalah pendengaran). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sanmargaraja, Shalini (2017) Provision of accessible facilities for the people with disabilities in the Johor National Parks: case study in Endau-Rompin, Kukup Island and Forest Park Ledang Hill. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Shafin, Noor Afifah (2017) The implementation of persuasive technology principles in mobile application development: a qualitative study. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Saleh, Shukur (2017) An improved firefly algorithm for optimal microgrid operation with renewable energy. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Samat, Nurul Ashikin (2017) An improved imputation method based on Fuzzy C-Means and particle swarm optimization for treating missing data. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sambu, Mathan (2016) Acoustical performance and physical properties of sound absorber with difference composition of natural rubber. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Saedon, Nursyahidah (2016) Comparative study of the shrinkage characteristics of peat at south east Johore. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Syed Othman, Syed Muhammad Naufal (2016) Design of outer rotor field excitation flux switching motor for direct-drive application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Saripan, Muhammad Sharil (2016) Development of a microfluidic dilution and infusion pump system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Shahri, Zarina (2016) Development of an environmental management framework for sustainable reuse of Malaysian dredged marine sediments. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Salem Alwan, Yaser Hasan (2016) Development of an integrated model for adoption of management information systems in Yemeni telecommunication organizations. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Sabran, Siti Fatimah (2016) Documentation, antimycobacterial activity, and phytochemical profiling of selected medicinal plants used by the Jakun community in Johor. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Sim, Sy Yi (2016) Efficiency optimization of a direct torque control (DTC) induction motor drive. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Sombar @ Abdul Hamid, Salihah (2016) Efikasi kendiri dan penguasaan kemahiran manipulatif dalam kalangan pelajar KKTM Sri Gading. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Shariff, Muhammad Syarafuddin (2016) Evaluation of noise level in coach and train station at LRT Kelana Jaya line. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sa'at, Nabila (2016) GPS positioning improvement by mitigating the ionospheric horizontal gradient. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sa'ude, Nasuha (2016) Layered manufacturing of polymer matrix composites (PMC) materials via fused deposition modeling (FDM). PhD thesis, Universiti Tun Hussein Onn Malaysia.

Selamat, Juliyana (2016) Pembelajaran informal dalam kalangan guru bukan opsyen bahasa Melayu di sekolah menengah harian. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Saktirun, Norhayati (2016) Persepsi pelajar terhadap amalan, kemahiran dan sikap serta hubungannya dengan aspirasi kerjaya dalam mata pelajaran vokasional di sekolah menengah harian daerah Batu Pahat. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sulaiman, Syazwan Liyana (2016) Preparation and characterisation of poly (vinyl alcohol)/chitosan/silicon dioxide (PVA/CS/SiO2) beads for the chromium (VI) (Cr (VI)) removal. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Suardi, Mirnah (2016) Rapid premixing fuel-water-air injector in burner combustion. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sa'adon, Shafizah (2016) Sound absorption characteristics of natural fiber filled in flexible foam upon UV irradiation exposure. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Said, Nur Syahidah (2016) Toward green consumerism practices in Malaysia hotel industries. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Saharan, Sabariah (2016) A new genetic algorithm based clustering for binary and imbalanced class data sets. PhD thesis, University of Canterbury.

Soomro, Hassan Ali (2016) A new structure of 12sS-8P hybrid excitation flux switching motor using segmental rotor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Shazali, Natasha Adlin (2016) A study of suitable noise barrier materials for KTM commuter system at the residential area between Shah Alam to Bukit Badak route. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sukiman, Safra Liyana (2016) The use of video-based blogs to enhance ESL students’ oral presentation skills. Masters thesis, Universiti Teknologi Mara.

Saleh Alija, Amani (2015) Analysis of Dijkstra’s and A* algorithm to find the shortest path. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Samsudin, Nurnabilah (2015) An improved microarray image analysis architecture using mathematical morphology. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sulaiman, Nur Na’imah (2015) Development of repetitive current controller using raspberry pi for 3 phase active power filter for nonlinear load improvement. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sundararajoo, Kohshelan (2015) Improvement of audio feature extraction techniques in traditional Indian string musical instrument. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Samsuddin, Suryani (2015) The structural performance of precast lightweight foamed concrete panel (PLFP) with double shear connectors. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Soon , Ching Chun (2015) Development of a hybrid solar wind turbine for sustainable energy storage. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sarhan, Ali Raheem (2015) Feasibility study of air catcher for natural ventilation application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Siddiki, Aishatu (2015) Insect diversity and composition during the wet and dry seasons in three forest types of Johor, Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Suleiman, Khaled Bennour (2015) Inverted koch fractal dual band dipole antenna with harmonic suppression capability. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Supramaniyam, Vespanathan (2015) Penggunaan Teknologi Maklumat dan Komunikasi (TMK) dalam kalangan guru-guru Mata Pelajaran Kemahiran Hidup di Sekolah Rendah Luar Bandar Negeri Johor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Saleh, Mohd Saiful (2015) Simulation of liquid-gas for cpo-methanol mixing process in bubble column reactor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sidik, Mohd Azkar (2015) AC motor speed performance improvement using fuzzy logic control. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Saleh Al-Gahdari, Abdulaziz Shaif (2015) Development of mobile robot in virtual reality environment for educational purpose. Masters thesis, Universiti Tun Hussein Onn Malaysia.

S Abdulwafi, Tahani Almehdi (2015) Performance of CDMA power control for HAPS. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sheikh Osman, Abdulwali Abdulrahman (2015) Design of dual band u-slot microstrip patch antenna for worldwide interoperability for microwave access (WIMAX). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sh-Ali, Jamal Muhiyadin (2015) Performance of defected ground structure for rectangular microstrip patch antenna. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Stores, Fatima Sani (2015) The relationship between information technology (IT) investment and firm’s financial performance of public listed companies in Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Saher, Mohd Najib (2015) Amalan pengurusan keselamatan Bengkel Kemahiran Hidup (KHB) sekolah menengah harian Daerah Batu Pahat. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Shafi, Muhammad Ammar (2015) Application of fuzzy linear regression models for predicting tumor size of colorectal cancer in Malaysia’s hospital. Masters thesis, Universiti Tun Hussein Onn Malaysia.

S Giuma, Ahmed Eshtewi (2015) Comparative study on data searching in linked list & B-tree and B+tree techniques. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Salamat, Mohamad Aizi (2015) Developing electronic participation framework for public policy formulation in Malaysia. PhD thesis, Universiti Utara Malaysia.

Sarpin, Norliana (2015) Developing people capabilities for the promotion of sustainability in facility management practices. PhD thesis, Queensland University of Technology.

Sheikh Khalid, Faisal (2015) Engineering properties of ring shaped polytheylene terephthalate (RPET) fiber self-compacting concrete. PhD thesis, Universiti Tun Hussein Onn Malaysia.

S.M. Johan, Siti Farhanah (2015) Enhanced shear resistance of railtracks with ballast-rubber composites: a laboratory study. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sazali, Norazlianie (2015) Gas permeation properties and characterization of matrimid based carbon tubular membrane. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sanif, Sazuliana (2015) Implementation of peer observation of teaching in ELT tertiary education system in Malaysia: a social-constructionism view. PhD thesis, University of Exeter, United Kingdom.

Selamat, Asri and Esa, Ahmad and Mohd Salleh, Berhannudin and Mohamad, Baharom and Wan Ahmad, Wan Mohd Rashid and Mohd Zulkipli, Fuziah and Mohamad Twon Tawi , Faizal and Padil, Suhaili (2015) Kaedah pengajaran kemahiran insaniah dalam program kejuruteraan di politeknik Malaysia. Other thesis, Universiti Tun Hussein Onn Malaysia.

Salim, Salman (2015) Kajian terhadap penggunaan bolt bagi teknik penyambungan buluh dalam industri pembinaan. Other thesis, Universiti Tun Hussein Onn Malaysia.

Saparwan, Norfaezah (2015) Kerangka penelitian kesetaraan antara bidang kemahiran dan bidang akademik bagi proses APEL. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sakka, Seri Syahliliana (2015) Kesan aplikasi pembelajaran berteraskan multimedia terhadap pelajar teknikal dari aspek gaya pembelajaran visual di Politeknik Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sutaji, Siti Suhaila (2015) Kesan penggunaan koswer multimedia animasi visual terhadap pencapaian pelajar dalam mata pelajaran matematik. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Soomro, Aftab Ahmed (2015) Optimization of supply chain management by simulation based RFID with XBEE network. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Subramaniam, Tamil Selvan (2015) Pembangunan dan penilaian perisian e-PBL ReC untuk kursus kejuruteraan. PhD thesis, Universiti Kebangsaan Malaysia.

Saparudin, Intan Farhana (2015) Pendekatan psikologi dakwah menangani histeria remaja muslim di Selangor. PhD thesis, Universiti Kebangsaan Malaysia.

Suriani , Nor Surayahani (2015) Pengecaman peristiwa jatuh secara tiba-tiba menggunakan fitur gerakan dan pengelas ilhaman biologi sistem penglihatan. PhD thesis, Universiti Kebangsaan Malaysia.

Sulistyo, Sulistyo (2015) Production of single cell anode-supported SOFC using NiO/YSZ-YSZ-LSM/YSZ powder materials. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Said, Mohamed Abdisalan (2015) A comparison of discrete cosine transform and discrete wavelet transform algorithm in watermarking against common attacks. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Salimin, Surian (2014) Low order harmonics mitigation in grid connected, parallel PV inverters. PhD thesis, Newcastle University.

Saiman, Mohd Pahmi (2014) 2 dimenson woven kenaf unsaturated polyester composite. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Suhairi, Lidiyawati (2014) Komposit nano nikel oksida-samarium terdop seria karbonat-argentum (NiO-SDCC-Ag) sebagai anod bagi sel fuel oksida pepejal bersuhu rendah. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sougui, Ali Orozi (2014) Analysis and measurement of magnetic field emission near high voltage transmission lines (HVTL). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Suhurani, Noor Fazilah Ayu (2014) Analysis of technical losses in distribution line. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Saringat, Mohd Zainuri (2014) Attributes sanitization in object-oriented design to improve database structure. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Said, Faridah (2014) Compact microstrip bandpass filter. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Saat, Shahrizal (2014) DC motor speed control using fuzzy logic controller. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Said, Salmiza (2014) Design study of hybrid excitation flux switching motor for electric vehicles. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Syed Abu Bakar, Sharifah Adzila (2014) Development of metal dopedhydroxyapatite for bone implant application. PhD thesis, University of Malaya.

Shehu, Abdulkadir Adamu (2014) Effects of construction delays on contractor reputation in the Nigerian construction industry. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Supian, Nazirah (2014) Keperluan program persediaan penempatan guru teknikal di kawasan pedalaman. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Syed Ali, Syed Jaafar (2014) Kompetensi guru dalam pengajaran amali teknologi pembinaan di kolej vokasional. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Shamsulkamar, Syaban (2014) Modeling and control of 6-dof of industrial robot by using neuro-fuzzy controller. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sani, Winardi (2014) Multistage methanolysis of crude palm oil for biodiesel production in a pilot plant. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Sarkawi, Saiful Irwan (2014) PC cam (plate + cylindrical cam) design. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Suffian, Mohamad Mokhsen (2014) Performance and emissions of compression ignition engine fueled with preheated blend of vegetable oil. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Saion, Rasidayanty (2014) Persepsi guru-guru kemahiran hidup bersepadu terhadap literasi pentaksiran dalam pelaksanaan pentaksiran berasaskan sekolah. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sarani, Noor Amira (2014) Properties and environmental impact of recycling cigarette butts (CBs) in fired clay brick. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Shomran, Hadeer Taleb (2014) Simulation study of statistical process control schemes performance for monitoring variation. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Saad, Abdul Salam (2014) Three phase inverter for induction motor control using fuzzy-pi controller with Arduino. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Saad, Mohd Sallehudin (2014) Virtual paint on DE2 FPGA board through gesture detection and color segmentation technique. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Suliman Azzabi, Jafer Omer (2014) A broadband coaxial line for electrical characterizations of dielectrics. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sabdin, Saiful Din (2014) The effect of heat compression on mechanical behaviour and moisture content of pineapple leaf fibre and sugarcane bagasse waste for plate disposal. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Saad , Sahrudin (2013) Development of an AC-DC buck-boost power factor correction. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sa’don, Siti Nor Hafizah (2013) Planar inverted-f antenna (PIFA): a study of specific absorption rate (SAR) by using dual frequencies in mobile communications. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Subramaniyan, S Kanna (2013) Mechanical behaviour and energy absorption performances of composite foam-filled circular tubes under axial loadings. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sherwani , Fahad (2013) Robotic path planning using rapidly-exploring random trees. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Shahrom, Shazanee (2013) The study of the propagation of electromagnetic field under a 132kV overhead power lines and its exposure limits on the health of humans. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Salim, Nurul Shahira (2013) Amalan pembacaan berkesan dalam Kalangan Pelajar Sarjana Pendidikan Teknik dan Vokasional di Universiti Tun Hussein Onn Malaysia (UTHM). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Salleh, Mariam (2013) Comparison of rhombic type micromixer to improve mixing efficiency in biomems application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Saidin, Syahfitri (2013) Design and simulation of leakage current in Smart Power Module (SPM) motor drive application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sies, Mohamad Farid (2013) Development of the premixing injector in burner system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Shafie, Fazira (2013) FM Help Desk: user complaint system as an FM approach for facilities management services in Universiti Tun Hussein Onn Malaysia (UTHM). Other thesis, Universiti Tun Hussein Onn Malaysia.

Shafie, Fazira and Wan Yusoff, Wan Zahari (2013) FM help desk : user complaint system as an FM approach for facilities management services in Universiti Tun Hussein Onn Malaysia (UTHM). Other thesis, Universiti Tun Hussein Onn Malaysia.

Sahid, Mohd Zanes (2013) Facilitating novices’ program comprehension in program slicing via a knowledge-based and program slicing tool. Masters thesis, Universiti Teknologi MARA.

Senan, Norhalina (2013) Feature selection for traditional Malay musical instrument sound classification using rough set. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Sahidi, Sujanuriah (2013) Friction stir welding of dissimilar metal. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sahari, Norain (2013) Generation of homogeneous glow discharge using a combination of fine wire mesh and perforated aluminium electrode. Masters thesis, Universiti Teknologi Malaysia.

Sidek, Sabariah (2013) Hubungan kecerdasan emosi dengan pencapaian akademik dalam kalangan pelajar-pelajar kolej Vokasional Kementerian Pelajaran Malaysia (KVKPM). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Salleh, Hamidon and R. Ragavan, Vijay and Kenichi, Funazaki and Alimin, Ahmad Jais and Md Seri, Suzairin and Mohideen Batcha, Mohd Faizal and Atan, Siti Rohila (2013) Hydrodynamic and thermal characteristics study of cooling structure (IIC) for eco-gas turbine engine blade. Other thesis, Universiti Tun Hussein Onn Malaysia.

Sanik, Mohd Erwan (2013) Investigation of breakdown event at merging sections of federal highway. Other thesis, Universiti Tun Hussein Onn Malaysia.

Suratkon, Azeanita (2013) Japanese design-build: an analysis of its uniqueness based on responsibility and risk allocation in construction contracts. PhD thesis, Chiba University.

Sallehuddin, Nur Fazreen (2013) Kesedaran terhadap amalan keselamatan dalam kalangan pelajar di Makmal Kejuruteraan UTHM. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Saleh, Noorsyarzielah (2013) Kesedaran terhadap amalan pemakanan seimbang dalam kalangan pelajar Politeknik Merlimau, Melaka: satu tinjauan. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sh Ahmad , Sh Salleh and Anak Gani, Isstella Mengan (2013) Optimization algorithms for re-entrant flow shop scheduling heuristic using bottleneck approach. Other thesis, Universiti Tun Hussein Onn Malaysia.

Soluman Ahtiewsh , Aimen Kahlifa (2013) Optimization of DC - DC boost converter using fuzzy logic controller. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sheikh Abd Hamid, Siti Nurul Ainmey (2013) Pendidikan vokasional dalam kalangan masyarakat orang asli sebagai pembelajaran sepanjang hayat. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sulaiman, Muhammad Azwan (2013) Penilaian kualiti persekitaran dalaman (IEQ) bangunan akademik Institusi Pengajian Tinggi Awam (IPTA) Malaysia dalam konteks pengurusan fasiliti. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sidek, Kamsidi @ Abd Malek (2013) Production improvement in ACM manufacturing company using lean manufacturing approach. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Siagian, Caroline Dame (2013) Risk assessment in power system using multi-criteria decision making (MCDM) methods. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Samiran, Nor Afzanizam (2013) Simulation study on the performance of vertical axis wind turbine. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Syed Jamalil, Syed Akhmal (2013) Solving economic dispatch problem using particle swarm optimization. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Shamsuri , Mohd Mahathir Suhaimi (2013) Strategi pembangunan program homestay Kampung Kangkar Merlimau. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sarnon, Mohd Zaki (2013) Two ways power flow with renewable energy integration. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Samad, Onn (2013) The development of essential skills measurement for production workers in manufacturing environment. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sulaiman, Zulkifli (2013) The influence of slag and PSAC on the wear resistance of composite aluminium. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Salleh, Noor Amani (2013) A new routing metric for DYMO protocol on mobile ad hoc network. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sapian, Nik Fazli (2012) Design of pulse jet coolant delivery system for minimal quantity lubricant (IP MQL) operation. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sulaiman, Alinah (2012) Kajian pemindahan haba dalam ruang yang menggunakan siling berpenebat fiber sabut kelapa. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sulaiman, Nurul Ain (2012) Amalan pensyarah dalam perlaksanaan pendidikan berasaskan hasil (OBE) di Universiti Tun Hussein Onn Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Soo , Poey Lam (2012) Analysis of the flow characteristic inside a heated and unheated horizontal rifled tube. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sulaiman, Erwan (2012) Design studies on less rare-earth and high power density flux switching motors with hybrid excitation/ wound field excitation for HEV drives. PhD thesis, Nagoya Institute of Technology.

Sanik, Mohd Erwan and Yusof, Ismail and Omar, Noorliyana and Mohamad Taher, Mohammad Nasir (2012) Development of expressway on- and off-ramp capacity models based on Malaysian expressway condition. Other thesis, Universiti Tun Hussein Onn Malaysia.

Sari, Suhaila and Roslan, Hazli (2012) Development of new method for image denoising technique in the blind condition. Other thesis, Universiti Tun Hussein Onn Malaysia.

Sabudin, Elia Nadira (2012) Development of position tracking of BLDC motor using adaptive fuzzy logic controller. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Saesar, Luhur (2012) Development of semi-autonomous mobile robot hardware-in-the-loop (HIL) simulation for indoor mapping. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Saim, Hashim and Nayan, Nafarizal (2012) Fabrication and characterization of aluminium doped zinc oxide (AZO) thin films using chemical vapour deposition. Other thesis, Universiti Tun Hussein Onn Malaysia.

Soon, Chin Fhong and Samion, Norhafiza (2012) Fabrication and charaterisation of the electrical and physical properties of the graphite paste electrodes for application in biochemistry sensing. Other thesis, Universiti Tun Hussein Onn Malaysia.

Subawi@Fendi, Irrinna Shakinah (2012) Gaya pembelajaran dalam kalangan pelajar bagi mata pelajaran sains. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sindiong@Mohd Sany, Kamilia (2012) Hubungan antara pengajaran mikro dengan tahap keyakinan mengajar dalam kalangan guru pelatih UTHM. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Salim, Nor Zalifah (2012) Hubungan di antara gaya pembelajaran dan kemahiran insaniah dengan pencapaian akademik pelajar. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Saring, Alifah (2012) Hubungan kecerdasan emosi dan gaya pembelajaran dengan prestasi akademik pelajar UTHM. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Soon, Chin Fhong and Morgan, Denyer and Nayan, Nafarizal and Saim, Hashim (2012) Investigation of traction patterns and forces of single quiescent and migratory keratinocytes using a novel cell traction force microscopy technique. Other thesis, Universiti Tun Hussein Onn Malaysia.

Suparman, Muhammad Ihfan (2012) Keberkesanan aplikasi interactive stamping tool and modelling package (ISTAMP) terhadap visual, auditori dan kinestatik (VAK) Pelajar KKTM Balik Pulau. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sidek, Shamsiah (2012) Penggunaan media pengajaran dalam kalangan guru-guru Mata Pelajaran Geografi di Daerah Batu Pahat, Johor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Samsuri, Noorainul Arifah (2012) Penyediaan fasiliti OKU di Sekolah Menengah Pendidikan Khas Vokasional Indahpura. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sanmargaraja, Shalini (2012) Penyediaan fasiliti di rumah warga tua: kajian kes di Bandaraya Ipoh dan Johor Bahru. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Salleh, Ismail (2012) Study on properties of clay brick and CB brick under different heating rates. Other thesis, Universiti Tun Hussein Onn Malaysia.

Suadi, Sahila (2012) Tahap kepuasan para pelajar terhadap program persediaan kerjaya di Universiti Tun Hussein Onn Malaysia (UTHM). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Saher, Rohaizan (2012) Three phase boost rectifier design. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Said, Shabudin (2012) Tinjauan terhadap kesediaan pensyarah teknikal melaksanakan sistem Production Based Education (PBE) di IKM Johor Bahru. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sudin , Sukhairi (2012) Wireless knee joint angle measurement system using gyroscope. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Subhi , Zaid Ali (2012) The effects of vortex gate design on mechanical strength of thin section casting of LM 25 (Al—7Si-0.3mg) aluminum casting alloy. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sinan Abood Habeeb, Sinan Abood Habeeb (2012) The influence of temperature and types of filter media on the palm oil mill effluent (POME) treatment using the hybrid up-flow anaerobic sludge blanket (HUASB) reactor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sulong, Nurulsaidatulsyida (2011) Utilization of low hydroxyl content of waste oil polymer foam doped with waste materials for sound absorption application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sasi Koshad , Rabia Abrahim (2011) CFD simulation of heat transfer in vertical ribbed tube. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Suki , Nauwal (2011) Flexural analysis of concrete beams longitudinally reinforced with GFRP bars using discrete element model. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Seng, Sue Men (2011) Location theory based wind energy system planning. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Shamsuddin , Sharifah Hamimah (2011) Pembangunan dan penganalisisan aplikasi permohonan peruntukkan penyelenggaraan bangunan sekolah berasaskan proses pengurusan dalam kejuruteraan awam. Masters thesis, Universiti Tun Hussein Onn Malaysia.

S.Naji, Tammam (2011) Asymptotic CFD study of a plenum chamber in swirling fluid bed. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Soon , Chin Fhong (2011) Development of a novel cell traction force transducer based on cholesteryl ester liquid crystals. PhD thesis, University of Bradford.

Saryanto, Hendi (2011) High temperature oxidation behaviour of nanocrystalline Fe80Cr20 alloys and ferritic steel implanted with lanthanum and titanium. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sulaiman, Suhaizad (2011) Water permeability and carbonation on foamed concrete. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Spahat , Ghalip (2011) The role of learning organization in enhancing the implementation of National Dual Training System (NDTS) in Malaysia. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Sulaeman, Agus (2010) The use of lightweight concrete piles for deep foundation on soft soils. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Sulaiman, Mohamad (2010) Competencies required by the industry coaches to perform new tasks in the implementation of the National Dual Training System in Malaysia. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Shahidan, Shahiron (2009) Behavior of steel fiber reinforced concrete slab due to volume fraction of fiber. Masters thesis, Universiti Putra Malaysia.

Shafii, Mohd Amin (2009) Skid resistance and the effect of temperature. Masters thesis, Universiti Teknologi Malaysia.

Sh Ahmad, Sh Salleh (2009) Bottleneck adjacent matching heuristics for schedulling a re-entrant flow shop with dominant machine problem. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Saad, Noradilah (2009) Amalan kreativiti dan inovasi melalui Projek Sarjana Muda dalam kalangan pelajar kejuruteraan di UTHM. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Selamat, Asri (2009) Kesamarataan gender dalam bidang industri di Malaysia. Adakah wanita telah bersedia? Other thesis, Universiti Tun Hussein Onn Malaysia.

Shafie, Zakiah (2008) Mengenal pasti tahap pengetahuan pelajar tahun akhir Ijazah Sarjana Muda Kejuruteraan di KUiTTHO dalam bidang keusahawanan dari aspek pengurusan modal. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Salustiano Dos Reis , Piedade (2008) Failure analysis of a superheater tube of a coal-fired power plant. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Saiman , Suhaimi (2007) CPLD based controller for single phase inverters. Masters thesis, Universiti Malaya .

Samin , Reza Ezuan (2006) Forecasting sunspot numbers using neural network : effect to the electrical system. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Shaari, Muhammad Farid (2006) Development of dissolved oxygen control system for indoor prawn culture. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Suriani , Nor Surayahani (2006) Vessels classification. Masters thesis, Universiti Teknologi Malaysia.

Sanudin, Rahmat (2005) Characterisation of ballistic carbon nanotube field-effect transistor. Masters thesis, Universiti Teknologi Malaysia.

Shamsudin , Shazarel (2005) Development of the process planning for machining prismatic parts. Masters thesis, Universiti Putra Malaysia.

Syed Mohamad, Syed Burhanuddin Hilmi (2005) Corrosion assessment on reinforced concrete and its service life prediction. Masters thesis, Universiti Putra Malaysia.

Sulong, Muhammad Suhaimi (2005) Pencirian elektrik dan bahan bagi peranti CMOS 0.15 mikron. Masters thesis, Universiti Kebangsaan Malaysia.

Sahdan, Mohd Zainizan (2004) Mask design fabrication and test NMOS transistor. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Suratkon, Azeanita (2004) The change in roles of architec's and quantity surveyor's from conventional to partnering approach. Masters thesis, Heriot-Watt University.

Sabudin , Sulastri (2004) Defect analysis on investment casting : a case study. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Sadikin, Azmahani (2004) Modelling of the flow of refrigerant 134a in capillary tubes. Masters thesis, Cranfield University.

Shaharil , Mohd Shah (2004) Investigation of the effects of fabrication tolerances in microwave thick-film circuits. Masters thesis, University of Surrey.

Saon, Sharifah (2004) Adaptive noise cancellation by LMS algorithm. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Saharan, Sabariah (2004) Analisis tahap pencapaian pelajar di Fakulti Sains dan Teknologi, UKM dengan menggunakan model linear berhierarki. Masters thesis, Universiti Kebangsaan Malaysia.

Sulaiman, Erwan (2004) Mitigation of AM interference in digital transmission. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Sia, Chee Kiong (2004) Non-CFC refrigerants : first and second law efficienies. Masters thesis, Universiti Teknologi Malaysia.

Shaik Ismail, Siti Mahani (2004) Pembangunan modul pengajaran kendiri (MPK) keusahawanan dalam topik isu keusahawanan bagi pelajar diploma di politeknik. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Sari , Suhaizila (2004) Pembelajaran Berasaskan Masalah (PBM) dalam memberikan langkah penyelesaian masalah, motivasi dan minat pelajar terhadap bab litar arus terus : satu kajian di SMT Bukil Katil, Melaka. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Selamat, Mohd Anuar (2004) Penilaian penggunaan Pro-Trainer dalam proses pengajaran dan pembelajaran (P&P) mata pelajaran Robotik dan Sistem Kawalan (DTE 3593) di KUiTTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Syed Ahmad, Syarifah Nur Aqida (2004) Porosity study and effects on mechanical properties of discontinuous reinforced metal matrix composite (DRMMC). Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Seman, Rabi'ah (2003) Penghasilan dan penilaian modul kendiri interaktif bagi tajuk pengawalan di sebuah politeknik. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Samsudin, Intan Shazila (2003) Penghasilan sistem e-template modul pusat pendidikan berterusan (PBB) KUiTTHO: kajian kebolehgunaan di KUiTTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Saim, Mohamed (2003) Penghasilan dan penilaian video dokumentari pendidikan dalam bentuk CD-ROM bertajuk "Prosedur Ujian Bahan Binaan Jalan Raya". Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Sahidun, Sahairil Azlan (2003) Penggunaan animasi melalui multimedia dalam pengajaran dan pembelajaran matapelajaran elektrik dan elektronik. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Stapah@Salleh, Mazuin (2003) Penghasilan Modul Pembelajaran Kendiri Berasaskan Komputer Mata Pelajaran Prinsip Elektrik (Topik Perintang). Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Shuib, Azrul Hisham (2003) Penghasilan dan penilaian perisian kursus matapelajaran elektronik digit dan instrumentasi (PERISIAN CDEDI). Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Shafie , Nurull Zuraida (2003) Tinjauan terhadap pengetahuan, kemahiran dan minat dalam bidang keusahawanan di kalangan peserta kursus jangka pendek anjuran Jabatan Pendidikan Teknik dan Vokasional. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Sanatora, Suhana (2003) Keberkesanan gaya pembelajaran berkumpulan(koperatif) terhadap prestasi pelajar sijil awam pembinaan semester 4 dalam mata pelajaran kejuruteraan jalan raya (c306). Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Shafiai@Shafii, Shafizah (2003) Punca dan tahap tekanan dikalangan pelajar Ijazah Sarjana Muda Kejuruteraan Awam di Kolej Universiti Teknologi Tun Hussein Onn. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Selamat, Norhanim (2003) Lecture assessment system (report module). Masters thesis, Universiti Teknologi Malaysia.

Saringat, Mohd Zainuri (2003) Lecture assessment system (manage student attendance module and manage marks module). Masters thesis, Universiti Teknologi Malaysia.

Shaik Ismail, Siti Mahanum (2003) Pembangunan modul prinsip ekonomi dalam topik teori permintaan dan penawaran bagi pelajar diploma di politeknik. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Shafie , Sanuzee (2003) Persediaan pelajar tahun akhir Diploma Akauntasi sebelum memasuki alam pekerjaan berdasarkan kriteria yang dikehendaki oleh majikan. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Salian, Firhan (2003) Pembangunan panduan pembelajaran kendiri remote sensing berasaskan web Kolej Universiti Teknologi Tun Hussein Onn (KUITTHO). Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Salleh, Jidarulaila (2003) Hubungan gaya pengajaran guru dengan pencapaian akademik pelajar bagi mata pelajaran perdagangan di Sekolah Menengah Teknik Datuk Seri Mohd Zin Alor Gajah Melaka. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Salim, Nurulhuda (2003) Penghasilan dan penilaian buku panduan penggunaan osiloskop. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn. . .

Sudar, Kalsom (2003) Satu tinjauan terhadap pengetahuan pengurusan kewangan dalam bidang keusahawanan bagi pelajar tahun akhir sarjana muda kejuruteraan KUiTTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Syed Hamid, Sharifah Yuhayu (2003) Strategi pemasaran di dalam bidang keusahawanan : satu tinjauan di kalangan pelajar katering, Sekolah Menengah Teknik Muar, Johor. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Salleh, Mazlina (2003) Kriteria rekabentuk dalaman di bengkel kerja kayu Kolej Universiti Teknologi Tun Hussein Onn (KUiTTHO). Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Slat, Sulie (2002) Penghasilan dan penilaian manual pembelajaran terarah kendiri (MPTK) bagi hitungan isipadu kerja tanah menggunakan perisian SDR mapping & design. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Syed Nordin, Siti Zarida (2002) Kajian kesesuaian CD ROM interaktif yang dibina bagi menghasilkan bahan pengajaran teknik dan vokasional. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Sulong, Sharmilla (2002) Kajian penggunaan NICENET bagi matapelajaran teknikal di kalangan pelajar sarjana pendidikan teknik dan vokasional, semester 1 sesi 2001 / 2002. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Sivanganam, Lalithambigai (2002) Communication skills: what do employers' expect? (workplace communication skills for engineering graduates). Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Siagian, Caroline Dame (2002) Satu kajian kualitatif dalam pembinaan polisi pengecualian jam kredit suatu panduan umum untuk pelajar diploma dari politeknik yang memohon masuk secara terus ke peringkat pengajian sarjana muda di Kolej Universiti Teknologi Tun Hussein Onn. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Shaffai, Mohd Rakime (2002) Hubungan kecerdasan emosi dengan pencapaian akademik :kajian di kalangan pelajar Sarjana Muda Kejuruteraan KUiTTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Salleh, Bibie Sara (2002) Keberkesanan program latihan industri di kalangan pelajar Ijazah Sarjana Muda Kejuruteraan Kolej Universiti Teknologi Tun Hussein Onn. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Sabiran, Nurul Esly (2002) Masalah gangguan seksual : satu tinjauan di kalangan kakitangan akademik Politeknik Port Dickson, Negeri Sembilan. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Seman, Mohamad Anuar (2002) Penggunaan kaedah pengajaran koperatif Student Teams-Achievement Divisions (STAD) bagi pengajaran perakaunan kos 1 : kajian kes di Jabatan Perdagangan Politeknik Kota Bharu. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Sulong, Rasyidah (2002) Penghasilan dan pengujian modul pengajaran dan pembelajaran berpusatkan pelajar mata pelajaran seni reka fesyen bagi kursus seni reka fesyen di Politeknik Johor Bahru. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Shamsuri , Nurul Hayati (2002) Penghasilan dan penilaian modul pengajaran kendiri pengenalan kepada perakaunan : satu kajian kes di Politeknik Port Dickson, Negeri Sembilan. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Stapah @ Salleh, Mazura (2002) Penghasilan manual asas pembinaan laman web sebagai bahan rujukan pembelajaran pelajar Sarjana Pendidikan Teknik dan Vokasional, Kolej Universiti TeknologiTun Hussein Onn. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Syed Jaafar, Sharifah Noor Anita (2002) Penguasaan kemahiran generik dalam memenuhi kehendak pasaran kerja: kajian dikalangan pelajar semester akhir Diploma Kejuruteraan di Politeknik Port Dickson. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Sabidin, Farhana (2002) Perlaksanaan penilaian berterusan meningkatkan pencapaian akademik pelajar : satu kajian di Politeknik Johor Bahru. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Samat, Siti Mariam (2002) Tahap pengawalan pihak pengurusan politeknik dalam mengurangkan gejala sosial di kalangan pelajar. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Sulaiman, Norkiah (2001) Tahap penggunaan sumber maklumat elektronik di kalangan pelajar fakulti kejuruteraan KUiTTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Suria , Md Yusof (2001) Keusawanan sebagai satu kerjaya:satu tinjauan di kalangan pelajar tahun akhir Sarjana Muda Kejuruteraan Awam KUiTTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn .

S. Hashim, Sharipah Khadijah (2001) Minat, sikap dan kesediaan guru terhadap penggunaan komputer dalam pengajaran dan pembelajaran. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Saad, Norsalbiah (2001) Pengetahuan pelajar pemasaran terhadap penggunaan pemasaran terus melalui medium elektronik (E-Dagang). Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Sarip, Mohd Zaidi (2001) Persepsi pelajar sarjana terhadap subjek yang ditawarkan dalam program Sarjana Pendidikan Teknikal KUiTTHO. Masters thesis, Kolej Universiti teknologi Tun Hussein Onn.

Simarani, Juhana (2001) Tahap kemahiran pelajar Kejuruteraan Awam Kolej Universiti Teknologi Tun Hussien Onn (KUiTTHO) Batu Pahat menggunakan komputer sebagai sumber pembelajaran. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Shaari, Sheilani (2001) Tinjauan ke atas tahap kesediaan pelajar terhadap kerjaya pendidik di politeknik : satu kajian kes di kalangan graduan Sarjana Pendidikan (Teknikal) di Kolej Universiti Teknologi Tun Hussein Onn, Batu Pahat. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Shahran, Annie Azlina and Hassan, Herliana and Salbi, Jamaliah (2001) Gaya pembelajaran pelajar kursus Sarjana Muda Kejuruteraan di Kolej Universiti Teknologi Tun Hussein Onn. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

T

Tuan Mohd Yasin, Sharifah Nurulhuda (2017) Kerangka penambahbaikan pelaksanaan program Diploma Kejuruteraan Mekatronik Politeknik di Malaysia. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Talib, Norfazillah (2017) Performance evaluation of biodegradable metalworking fluids for machining process. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Tukiman, Mohd Mustaqim (2017) Performances of a spark ignition (SI) engine fuelled with liquefied petroleum gas (LPG) using liquid sequential injection (LSI) technique. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Tuan Ismail, Tuan Noor Hasanah (2017) A critical performance study of innovative lightweight fill to mitigate settlement of embankment constructed on peat soil. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Thong, Kok Tung (2016) Development of a novel liquid crystal based 3D micro-tissues culture technique and microfluidic vibrational cleaner. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Taib, Ishkrizat (2016) Improvement of haemodynamic stent strut configuration for Patent Ductus Arteriosus through computational modelling. PhD thesis, Universiti Teknologi Malaysia.

Tan, Leslie Aik Fong (2016) Prediction model of sound level LA,max at residential area of Kelana Jaya LRT line. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Tokeran, Mohd Faizal (2016) A case study of two participating companies on the impact of national dual training system (NDTS) implementation on teaching strategies. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Tan , Shen Kian (2016) The influence of intrinsic and extrinsic motivation on Malaysian academics participation in the national innovation strategy. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Tuah, Siti Nor Aizura (2015) Mechanical and thermal properties of polypropylene/clay roof tiles waste (PP/CRTW) composites. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Tuan Ahmad, Tuan Mohd Mustaqim (2015) The development of new backside decapsualtion technique to investigate integrated circuit failure in the automotive application environment. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Talib, Rahmat (2015) Multi slot amplitude coding technique for high speed optical fiber communication system. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Tam, Lina (2015) The development of finite element model for Malaysian female anthropometric dummy. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Tumiran, Mohamad Taufik (2015) Analysis on vibration monitoring at mrt infrastructure construction site. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Talpur, Kashif Hussain (2015) Improvement of fuzzy neural network using mine blast algorithm for classification of Malaysian small medium enterprises based on strength. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Tan, Mee Ting (2015) Building a family ontology to meet consistency criteria. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Tong, Yean Ghing (2015) High acoustic insertion loss facade devices that allows natural ventilation in a densely populated high-rise built environment. PhD thesis, The Hong Kong Polytechnic University.

Tahir, Norhaiza (2015) Hubungan personaliti guru terhadap kemahiran proses sains pelajar. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Tajul Baharuddin, Mohamad Faizal (2015) Integration of geochemical and geophysical approaches for the assessment of seawater intrusion on groundwater for agricultural purposes. PhD thesis, Universiti Malaya.

Talib, Rahmat (2015) Multi slot amplitude coding technique for high speed optical fiber communication system. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Tarmizi, Mohd Radzi (2014) Design and modelling of 6 DOF revolute robot using fuzzy PID controller. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Tuan Ameri, Tengku Suzi Mas Ayu (2014) Design study of field excitation flux switching machine for electric vehicles. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Tali @ Razali, Mohd Hayumabdissalam (2014) Electric field modeling of outdoor insulator for optimized performance. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Talib, Mohd Fairuz (2014) Keprihatinan pensyarah terhadap amalan keselamatan bengkel di ADTEC Batu Pahat. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Tukiran, Norazlina (2014) Literasi pentaksiran dalam kalangan calon guru teknikal di IPTA zon selatan. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Takim, Selamat (2014) Minat pelajar dalam subjek kemahiran hidup bersepadu. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Taha, Hind Mowafaq (2014) Robust braille recognition system using image preprocessing and feature extraction algorithms. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Tasuki, Norazleen (2014) An optimal load shedding scheme based on the analytical hierarchy approach: a case study of the Selangor Electrical System. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Tuan Ibrahim, Tuan Mohd Hafeez (2014) A study of crashworthiness characteristic of woven kenaf fabric reinforced composites tube. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Tengku Ahmad , Tengku Marissa (2013) Climate control utilizing solar powered ventilation system for parked car. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Thazali, Nur Athirah (2013) Investigations of ageing mechanism and electrical withstand performances of the field aged 132 kV PMU Skudai’s ceramic post insulator. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Tai, Chia Wuen (2013) Development of early warning methods for voltage instability in electric power system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Tajaldin Moner, Mawahwab Abdalhamid (2013) Experimental study of heat transfer distribution between an obliquely smooth flat plate and impinging air jet from circular nozzle. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Tengku Zahari , Tengku Noraisyah (2013) Impak program latihan dalam kalangan pengusaha homestay ke arah keberkesanan pembangunan program homestay di peringkat komuniti: kajian dari perspektif pengusaha. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Tan , Shen Kian (2013) Motivation and citizenship performance of generation X & Y in electric and electronic industry. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Tuan Nawi, Tengku Mohamad Azrin (2013) Penggunaan sistem bangunan berindustri (IBS) bagi pembinaan bangunan dalam kalangan kontraktor di Negeri Kelantan. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Tze Kiong, Tee (2013) Pengintegrasian kemahiran berfikir dan peta minda buzan bagi penguasaan kemahiran berfikir aras tinggi. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Tormudzi, Intan Nazrifa (2012) Kebolehpasaran graduan bermasalah pendengaran bidang hospitaliti dalam industri hospitaliti di Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Taib, Mohd Muhsein (2012) Experimental investigation on the feasibility and durability of a novel diesel particulate filter. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Tukeman, Zalifah (2012) Fuzzy logic – genetic algorithm based maximum power point tracking in photovoltaic system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Tuan Omar, Tuan Rosnimawati (2012) Penguasaan kemahiran insaniah dalam kalangan pelajar pendidikan khas di Politeknik. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Tan, Kheng Wee (2012) A conceptual design of an alternative method for cutting off standby power consumption for office equipment. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Tay , Kim Gaik and Ong , Chee Tiong and Tan , Wooi Nee and Muhammad Basri, Cik Sri Mazzura and Choy , Yaan Yee (2011) Non-linear waves modulation in a stenosed elastic tube. Other thesis, Universiti Tun Hussein Onn Malaysia.

Tang, Bee Lin (2011) Revitalization of organic and peat soils. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Tee , Kian Sek (2011) A mechatronic system for achieving optimum alignment of lower limb prosthesis. PhD thesis, University of Leeds.

Taib, Hariati (2009) Synthesis and electrophoretic deposition of tin oxide (Sn02). PhD thesis, University of New South Wales.

Timyati, Firdaus @ Nukha (2008) Designing of an operational amplifier. Masters thesis, Universiti Tun HUssein Onn Malaysia.

Tee, Swee Yin (2008) Energy efficient building:the application of thermal energy storage (TES) for cooling load reduction. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Tan, Wee Choon (2008) Characteristics of plates embedded with shape memory alloy wires. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Tan, Phei Yee (2007) Kesan gaya pembelajaran visual, audio dan kinestatik terhadap pembelajaran bahasa pengaturcaraan di kalangan pelajar politeknik. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Tan, Wei Sin (2007) Pengaruh kualiti CD mata pelajaran lukisan terbantu komputer dengan menggunakan perakam skrin camtasia studio terhadap motivasi, kefahaman dan pencapaian pelajar. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Tee , Kian Sek (2007) A training model of an automated storage and retrieval system (AS/RS) with customized warehouse management system (WMS). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Tuan Mat, Tuan Rozilaazawani (2004) Kualiti pengalaman pembelajaran pelajar-pelajar kejuruteraan di KUiTTHO dari aspek kognitif dan afektif. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Talib, Rahmat (2004) Development of optical devices simulation software using finite difference method. Masters thesis, Universiti Teknologi Malaysia.

Talibin, Md Najip (2003) Kesediaan guru pelatih KUiTTHO memantau keselamatan pelajar dalam proses pengajaran di bengkel kejuruteraan pembuatan politeknik Malaysia. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Tuan Mahmud, Tuan Rakiza (2003) Kemampuan Politeknik Kementerian Pendidikan Malaysia dalam melaksanakan program pendidikan khas bagi pelajar pekak. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Tuan Mohd Yasin , Sharifah Nurulhuda (2003) Penyediaan dan penilaian modul pelaksanaan pameran kejuruteraan elektrik. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Tang , Hing Kwong (2002) Kepentingan pengetahuan dan kemahiran tentang penggunaan alat sistem keselamatan kebakaran di makmal Kejuruteraan Awam KUiTTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Torman, Zaida (2002) Amalan teknik mengingat di kalangan pelajar-pelajar Sekolah Menengah Teknik Batu Pahat, Johor. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Tee, Lian Yong (2002) Membina manual penerbitan CD interaktif dalam pendidikan. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Thayabarasilan, Sharma (2001) Meeting the market demand of generic skills : an analysis of generic skills acquisition among final year engineering students of KUiTTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Taib, Nor Iffah (2001) Cabaran-cabaran kerja wanita dalam industri pembuatan. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

U

Umar, Muhamad Akilu (2018) A framework of facilities management service user indicators through user experience to achieve service excellence in waste management service in Malaysian local governments. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Uddin, Jamal (2017) Empirical analysis of rough set categorical clustering techniques based on rough purity and value set. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Umar, Abdullahi (2017) Study on the antecedents of information technology adoption in the Nigerian small and medium scale enterprises. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Usman, Abubakar Sadiq (2017) The mediating infuence of entrepreneurial empowerment on the linkage between Islamic microfinance services and clients’ well-being in Malaysia: perceived assesment of service provider. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Usman, Hamza (2016) Homeowners’ perception on mortgage financing: a case of Bauchi metropolis Nigeria. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ullah, Md Amanat (2016) Incorporating environmental elements in property marketing strategy in Kuala Lumpur. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Utami, Silvia Firda (2016) Modeling analytical hierarchy process and Fuzzy Inference System Tsukamoto for production planning at a palm oil company in Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Usman Jamo, Hassan (2015) Mechanical properties of ceramics tiles by replacement of quartz by RHA and POFA. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Umar, Mohd Khairul Adzhar (2014) Design of fuzzy controller of IPMSM for electric vehicle application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ubale, Mohammed Yahaya (2013) Comparative study between Malaysian and Nigerian formal low cost housing policy issues. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Umar, Mohammed Akilu (2013) A study of the process and barriers of property tax revenue generation in local government (a case study of Pasir Gudang Municipal Council). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ubin, Aizan (2004) Characterization of electric field distribution in a GTEM cell. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Usoff, Mohd Yuzha (2004) Penghasilan perisian P&P berasaskan CD-ROM interaktif bagi topik Unjuran Stereografik dalam mata pelajaran Geologi Kejuruteraan (BKA 3023), di KUiTTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Umor, Muhammad Zulkifli (2003) A study on process parameter of reducing thinwall thickness by using mold flow simulation analysis. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

V

Vadanayagam Stephen, Alvin Jacob (2017) Quantification of arm joint motion for monitoring badminton performance using MEMS based wearable sensor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Valdez, Clara (2013) Voltage stabilizer of generator output through field current control using fuzzy logic. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Vechian, Mongkhun Qetkeaw (2012) Wireless control quadcopter with stereo camera and self-balancing system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

W

Wong, Soon Chuan (2017) Development of a flicking system for producing 3-dimensional cells in microbeads. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Wahab, Norhaliza (2017) Effect of reconstituted method on shear strength properties of peat. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Watisin, Wazli (2017) Pelaksanaan program pembelajaran berasaskan kerja politeknik bersama industri. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Wan Zahari, Wan Zubaidie (2017) The effect of surface treatment on composite interface, tensile properties and water absorption of sugar palm fiber/polypropylene composites. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Wan Ahmad , Wan Nurul Karimah (2016) Contextual factors of sustainable supply chain management practices in the oil and gas industry. PhD thesis, Delft University of Technology.

Wong, Lai Yoong (2016) Development of a holistic internet marketing strategy framework (IMSF) in promoting medical tourism industry (MTI) in Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Wan Kairuddin, Wan Nur Hafsha (2016) Investigation of kidney ultrasound image texture features for healthy subject. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Wan Omar, Wan Ibtisam (2016) Investigation of the physical properties of cholesteryl ester liquid crystal and the interaction with cells. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Wan Ghazali, Wan Akmal Irsyad (2016) Potential of building information modelling (BIM) in improving safety management in the Malaysian construction industry. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Wan Marzudi, Wan Noor Najwa (2016) Two element printed MIMO antennas for wireless applications. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Wan Zahari, Wan Ainaa Mardhiah (2015) Pembangunan kerangka makmal fiqh di Universiti Awam Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Wan Mohamad Noor, Wan Mohd Rizairie (2015) Distribution power level by gsm900 base station for rf energy harvesting. Masters thesis, Universiti Tun Hussein Onn Malaysia.

W. Abobaker, Ali Abduallah (2015) Study and simulation of DVB-T2 IRD performance for different types of channels. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Wan Salleh, Wan Mohd Shukri (2015) Development of knee joint angle trajectory tracking for leg support mechanism. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Wan Muda, Wan Shaiful Hasrizam (2015) Effect of welding heat input on the microstructure and mechanical properties of abs grade a steel at coarse grain heat affected zone (CGHAZ). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Wibowa, Pratama Jujur (2015) Synthesis of self–assembled polystyrene nanospheres/cadmium metal nanoparticles (PSNs/CdMNPs) composite thin film for its application as adsorbent and catalyst. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Wan Husin, Wan Norhashimah (2014) Design improvement of outer-rotor hybrid excitation flux switching motor for in-wheel drive electric vehicle. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Wan Hamat, Wan Hassan (2014) Development of pc based fuzzy logic controller for DC motor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Wan Yusop, Wan Mohd Fazli (2014) Faktor yang mendorong pencapaian akademik pelajar dalam program kimpalan di kolej vokasional. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Wu , Jia Hang (2014) Maximum torque of combination threats for spur gear based on AGMA and JGMA standards. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Wan Kadir, Wan Muhamad Hanif (2014) Modelling and control of articulated robot arm. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Wan Abas, Wan Hamidah (2014) Online position control system using incremental fuzzy control. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Wan Chek, Wan Ahmad Khusairi (2014) PI voltage control technique for 3 phase induction motor using Simulink and Arduino. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Wan Mansor, Wan Nur Hasymy (2014) Penerapan unsur kecindan dalam proses pengajaran dan pembelajaran reka bentuk teknologi. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Wan Hassan, Wan Azizurrahman (2014) Reverse engineering of micro light aircraft systems and design. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Wan Salim, Wan Saiful-islam (2014) Study of externally waste-gated turbine performance under steady and pulsating inlet conditions for improved turbocharger matching. PhD thesis, Imperial College London.

Wahab, Eta and Shamsuddin, Alina and Abdullah, Nor Hazana and Che Rusuli, Muhamad Saufi (2014) User online library database survey and return on investment (ROI): a case study in Universiti Tun Hussein Onn Malaysia (UTHM). Other thesis, Universiti Tun Hussein Onn Malaysia.

Wong, Frederick Tsun Kiong (2014) A cost effective solar powered led street light. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Wan Nazulan, Wan Munirah (2014) A study on transmission use of system (TUOS) charging methodology. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Wan Muda, Wan Hanim Nadrah (2013) Leadership capability of team leaders in construction industry. PhD thesis, Universiti Teknologi Malaysia.

Wan Ismail, Wan Zilliani (2013) Applying GA as a method of generating class schedule. A case study in UTHM. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Wan Mohd, Wan Syahidah (2013) Linear quadratic gaussian (LQG) controller design for servo motor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Wan Zakaria, Wan Abdul Hakim (2013) Persediaan pelaksanaan learn and work assignment (LWA) dalam sesi latihan industri untuk pelajar Kejuruteraan Mekanikal di POLIMAS. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Wan Mamat, Wan Norehan (2013) Tahap penguasaan kemahiran pemikiran kritis dalam kalangan pelajar kejuruteraan dan hubungannya dengan pencapaian pelajar. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Wong , Sie Woo (2012) Development of OFDM in WDM-radio over fiber access network. Masters thesis, Universiti Tun Hussein Onn Malaysia.

W Mohd Ghazali, W Siti Norfatin (2012) Determining the scintillation effect of GPS signal over the WARAS Research Centre UTHM. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Wan Zakaria, Wan Nurshazwani (2012) Force-controlled transcranial magnetic stimulation (TMS) robotic system. PhD thesis, Newcastle University.

Wan Ali, Wan Nor Syahira (2012) Kerangka pelaksanaan sistem pengakreditan pembelajaran berasaskan pengalaman terdahulu (APEL) di Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Wan Ismail , Wan Sabri (2012) Kesedaran keselamatan dalam kalangan pelajar Kolej Kemahiran Tinggi MARA di Lembah Kelang. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Wakiman, Nur Farhanah (2012) Modeling of photovoltaic (PV) module temperature based on ambient factor in Malaysia using ANFIS. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Wan Manan , Wan Nadiah (2011) Accident prediction model at un-signalized intersections using multiple regression method. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Wan Ibrahim , Mohd Haziman (2011) Engineering properties and microstructure of brickwork under aggressive environment. PhD thesis, Universiti Sains Malaysia.

Wan Ahmad, Wan Rashid and Mohd. Hashim, Mohamad Hisyam and Abdul Razzaq, Abdul Rasid (2011) Pelaksanaan Program Pendidikan Sepanjang Hayat di Kolej Komuniti Kementerian Pengajian Tinggi Malaysia. Other thesis, Universiti Tun Hussein Onn Malaysia.

Watisin, Wazli (2011) Pelaksanaan program pembelajaran berasaskan kerja di Kolej Komuniti Bukit Beruang Melaka: satu kajian kes. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Wahid, Noorhaniza (2011) A novel approach to data mining using simplified swarm optimization. PhD thesis, University of Sydney.

Wong, Kah Leong (2010) Structural behaviour of pre-fabricated composite pad footing foundation using cold-formed steel lipped channel sections. Masters thesis, Universiti Teknologi Malaysia.

Wan Yusoff, Wan Fauziah (2010) Characteristics of boards of directors and board effectiveness: a study of Malaysian public listed companies. PhD thesis, Victoria University.

Wahab, Md Saidin (2009) Development of wood base material for rapid prototyping process. Other thesis, Universiti Tun Hussein Onn Malaysia.

Wan Ahmad , Wan Nurul Karimah (2008) Quality management maturity and its relationship with human resource development strategies in manufacturing industry. Masters thesis, Universiti Putra Malaysia.

Wahid, Norfaradilla (2008) Code clone detection using string based tree matching technique. Masters thesis, Universiti Teknologi Malaysia.

Wahab, Md Saidin (2008) Selective laser sintering of polymer nanocomposites. PhD thesis, The University of Leeds.

Wan Yusoff, Wan Zahari (2008) Menilai kualiti perkhidmatan pihak berkuasa tempatan menggunakan instrumen FM-SERVQUAL. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Wahida Mohamed, Siti Farah (2008) Sistem mentoring dalam penyeliaan Projek Sarjana. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Wan Taha , Wan Noor Hanum (2007) Persepsi guru terhadap perlaksanaan program pendidikan pelancongan dalam menjana minda pelajar ke arah "think tourism". Masters thesis, Universiti Tun Hussein Onn Malaysia.

Wee, Yong Kok (2007) Analysis of flow and heat transfer over louvered fins in compact geometries. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Wan Sulaiman, Wan Nor Hafiza (2007) Penguasaan kemahiran generik di kalangan graduan hospitaliti di politeknik: satu kajian berkenaan keperluan industri perhotelan, persepsi pensyarah dan pelajar. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Wagiman , Abdullah (2006) Plasma arc surface modification of ASSAB 705 steel. Masters thesis, Universiti Malaya.

Wan Mansor , Wan Nurdiyana (2006) Design of heat exchanger network using pinch method. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Wahyuni, Hartati Wiji (2006) Pengaruh gaya dan aktiviti penasihatan akademik terhadap keberkesanan perlaksaaan sistem penasihatan akademik. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Wan Mansor, Wan Nurdiyana (2006) Design of heat exchanger network using pinch method. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Wan Zaki , Wan Suhaimizan (2006) Design and fabrication of BaTiO3 humidity sensor using thick film screen printing technique. Masters thesis, Universiti Putra Malaysia.

Wan Mohamed, Wan Afnizan (2004) Adsorption of phenol from aqueous solutions using incinerated sewage sludge. Masters thesis, Universiti Putra Malaysia.

Wan Mustaffa, Wan Nurazlin (2004) Flood monitoring system. Masters thesis, Kolej Universiti Teknologi Tun Hussein.

Wan Ibrahim, Mohd Haziman (2004) Water permeability of foamed concrete. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Wan Hashim, Wan Ajrul Asward (2003) Penghasilan modul pengajaran kendiri prosedur penubuhan syarikat awam berhad bagi mata pelajaran keushawanan untuk pelajar di Politeknik. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

W.Nawang, W. Khairuzaman (2003) Pembangunan manual proses pemesinan wire cut: program Kejuruteraan Mekanikal KUiTTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Wahab, Md Saidin (2003) Defect detection in high pressure die casting product using image processing technology. Masters thesis, University of South Australia.

Wan Mahmud, Wan Mahzhir (2003) Penghasilan panduan keselamatan industri bagi kegunaan bakal graduan kejuruteraan elektrik politeknik. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Woo, Zee Keong (2003) Developing an engineering laboratory work webCD:non-destructive tests. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Wan Sulong, Wan Norliana (2003) Pemahaman pelajar tingkatan lima katering terhadap bab kaedah memasak dalam mata pelajaran teknologi katering. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Wong, Sie Woo (2003) Pembangunan portal pendidikan teknik dan vokasional: satu kajian awal di kalangan pelajar sarjana PTV Jabatan Pendidikan Teknik dan Vokasional Fakulti Teknologi Kejuruteraan. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Wan Mohd Nowalid, Wan Marina (2003) Persediaan kerjaya pelajar tahun akhir diploma akauntansi politeknik dalam melahirkan K-Workers :satu tinjauan. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Wee, Soo Lee (2002) Penghasilan modul motivasi kepuasan kerja terhadap staf elektronik perubatan. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Wan Mohamed, Wan Noor Elyana (2002) Keusahawanan sebagai kerjaya:hubungan faktor-faktor pendorong terhadap minat dan kecenderungan pelajar Jabatan Perdagangan Politeknik se Malaysia. Masters thesis, Kolej Universiti Teknologi Tun Flussein.

Wan Mansor , Wan Hilmi (2002) Hubungkait antara sikap dan pengetahuan pelajar kejuruteraan awam terhadap amalan keselamatan di Bengkel Perkayuan, KUiTTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

W Mohd Shaufil, W Mohd Haniff (2002) Keberkesanan latihan mengajar menurut persepsi pensyarah politeknik lepasan KUiTTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Wan Ishak, Wan Maimunah (2002) Kemahiran menggunakan perisian perakaunan dan pemprosesan perkataan (word processing)di kalangan pelajar diploma perakaunan: satu tinjauan di lima politeknik di Malaysia. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Wan Mohamed, Wan Noor Elyana (2002) Keusahawanan sebagai kerjaya : hubungan faktor-faktor pendorong terhadap minat dan kecenderungan pelajar Jabatan Perdagangan Politeknik se Malaysia. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Wan Mokhtar, Wan Nurul Hekmah (2002) Latar belakang pendidikan pensyarah dan persepsi pelajar terhadap pensyarah dalam proses pengajaran dan pembelajaran di Politeknik Ungku Omar, Perak. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Wan Hassan, Wan Hamiza (2002) Tahap kefahaman dan kebolehan penggunaan perisian Microsoft Word dalam pembelajaran di kalangan pelajar Sarjana Pendidikan Teknik dan Vokasional, KUiTTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Wang, Joan Yee Juen (2002) Kajian terhadap penggunaan teknologi maklumat di kalangan pensyarah Politeknik Kota Kinabalu, Sabah:ke arah penghasilan garis panduan ABM berasaskan teknologi maklumat. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Wan Taha, Wan Noor Hanim (2001) Hirarki deskriptif pekerjaan mengikut perspektif pelajar tahun akhir diploma perniagaan. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Y

Yaacob, Mat Tawi (2017) A study of public parking facilities at HUSM Kubang Kerian. Other thesis, Univ Tun Hussein Onn Malaysia.

Yusuf, Nur Kamilah (2017) Effects of hot press forging parameter and life cycle assessment in direct recycling of AA6061 aluminium. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Yousuf, Muna (2017) Examining the role of trust in shaping customer satisfaction of mobile banking. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Yusof, Yusniza (2017) Kesan pembelajaran berasaskan contoh kerja terhadap beban kognitif dan pencapaian akademik pelajar kejuruteraan elektrik. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Yahya, Sufiah (2017) Physical and mechanical behaviour of polysiloxane filled silica sheet. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Yahya Sayegh, Ahmed Mohammed (2017) Radiated emissions of electrically long PCB based on imbalance difference and dipole antenna models. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Yabi, Shurl (2016) Analysis of vibration criteria on reinforced concrete floor due to footfalls and passing vehicles. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Yahya, Siti Asia (2016) Characterizations of Malaysia palf properties between hand scrapping and palf M1. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Yahyai@Atan, Roshayati (2016) Design and characterisation of wideband antennas for microwave imaging applications. PhD thesis, Universiti Teknologi Malaysia.

Yonis Buswig, Yonis. M. (2016) Development of a double-input interleaved boost DC-DC converter. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Yap, Hiung Yin (2016) Development of a microfluidic device and electronic infusion system to fabricate microcapsules of calcium alginate. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Yii, Ronny Shi Chin (2016) Simulation of different orifice geometries on premix injector. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Yahya Al-Emad, Nashwan Hamid (2016) Structural relationships model of delay factors in Makkah construction industry. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Yaacob, Maslina (2016) Wide range analysis of ozone gas concentration in ultraviolet region. PhD thesis, Universiti Teknologi Malaysia.

Yahya Almarrani, Ala Yahya (2016) The implementation of hybrid beam to column connection in precast concrete frame. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Yap , Aaron Boon Kian (2015) Building integrated photovoltaic (bipv) implementation: developer perspective. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Yusoff, Yusmahaida (2015) Experimental demonstration of cap transmitter using very high speed IC hardware description language (VHDL). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Yahya, Suleiman Anaf (2015) Leadership styles, types and students’ academic achievement in Nigeria. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Yeoh, Poh See (2015) An ansys cfx simulation on the study of 2 different automotive spraying techniques modeled with reference to 2 different spray angle. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Yusuf, Fatimah (2015) Multi robot task allocation using market based approach. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Yee, See Khee (2015) Electromagnetic shielding effectiveness of cement powder mixed with graphite for mitigation against electromagnetic interference. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Yusoff, Noor Ain (2015) Effect of field utilization factor on air breakdown level under lightning impulse. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Yee, Mei Heong (2015) Kesan manual pengintegrasian strategi pembelajaran dan kemahiran berfikir aras tinggi terhadap penjanaan idea dalam kalangan pelajar teknikal. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Yunus, Faizal Amin (2015) Pembangunan model pemindahan pembelajaran sistem latihan kemahiran Malaysia berasaskan national occupational skill standard (noss). PhD thesis, Universiti Kebangsaan Malaysia.

Yaacob, Siti Salwani (2015) RFID data reliability optimizer based on two dimensions bloom filter. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Yahya, Mohd Yamani (2015) The development of strategic planning concept process model for small medium enterprise (SME) in the construction industry. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Yusoff, Adnan (2014) Effect of sound radiation from plate attached with absober. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Yacob, Suhaila (2014) Evaluation of weld bead characteristics of AA6351 welded joints using gas metal arc welding cold metal transfer (GMAW-CMT). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Yunos, Muhamad Zaini (2014) Development of polysulfone /silver oxide membranes for separation of natural organic matters. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Yusof, Mohd Khairul Azhar (2014) Amalan keselamatan bengkel dalam kalangan pelajar Kolej Vokasional Temerloh. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Yunus, Nazira (2014) Design study of the proposed 12slot-14pole field excitation flux switching machine (FEFSM) for hybrid electric vehicles. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Yaziz, Nor Hidayah (2014) Digital speed and position control system incorporating an incremental encoder. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Yang Ghazali, Zalika (2014) Feasibility study of polysiloxane filled silica as a heat insulator application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Yaakub, Muhamad Faizal (2013) The implementation of sinusoidal PWM on single phase 5-level cascaded h-bridge multilevel inverter. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Yaqoob, Mansoor Taha (2013) Transformer thermal model of the disk coils with non directed oil flow. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Yusof, Ahmad Muhyiddin (2013) Comparative study of conventional PID and fuzzy-PID for DC motor speed control. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Yusof, Mohd Faiz Husny (2013) Development of DC-DC converter for DC motor using fuzzy logic controller. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Yeoh , Kim Hao (2013) Efficiency improvement of assembly line: case study of bus seat manufacturer. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Yahaya, Mohd Zubir (2013) Evaluation of heat exchanger on thermoacoustic performance. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Yahaya , Izat (2013) Kajian keberkesanan olahan larut lesapan menggunakan elektrod aluminum dan ferum dalam sistem elektro-penggumpalan. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Yaman, Maisarah (2013) Myparser: a Malay text categorization toolkit using inference rule. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Yusuf, Nur Kamilah and Lajis, Mohd Amri (2013) A new approach of direct recycling of aluminium alloy chips (AA6061) in hot press forging process. Other thesis, Universiti Tun Hussein Onn Malaysia.

Younis Al-Ashqar, Sayf Mohamed Dhiya (2013) The relationship between information technology usage and job satisfaction in administration at Universiti Tun Hussein Onn Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Yaqub, Muhammad Atif (2012) Multi fingered robot hand in industrial robot application using tele-operation. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Yeoh, David Eng Chuan (2012) Experimental-numerical comparisons of timber-concrete composite floors tested under short-term loading. Other thesis, Universiti Tun Hussein Onn Malaysia.

Yusop, Nuriman (2012) Kesediaan pengajar dan pelajar terhadap program kouza meeting di Kolej Kemahiran Tinggi MARA Beranang. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Yunus, Nor Izazi (2012) Pembangunan dan keberkesanan peta konsep ke atas pencapaian mata pelajaran sejarah dalam kalangan pelajar vokasional. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Yonis Buswig , Yonis Mohammed (2011) Development of a DC-AC power conditioner for wind generator by using neural network. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Yudhistira, Prima Adhi (2011) Kinematical analysis and simulation of transformable wheelchair mechanism. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Yahya Sayegh, Ahmed Mohammed (2011) Design and fabrication of a novel wideband tem–cell for dielectric measurements. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Yahya Sayegh, Ahmed Mohammed (2011) Design and fabrication of a novel wideband tem – cell for dielectric measurements. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Yee , Mei Heong (2011) Hubungan antara gaya pembelajaran kolb dan bentuk gaya berfikir Sternberg dalam kalangan pelajar Fakulti Pendidikan Teknikal. Other thesis, Universiti Tun Hussein Onn Malaysia.

Yusof, Mohd Sallehuddin (2011) Printing fine solid lines in flexographic printing process. PhD thesis, Swansea University.

Yaakub, Mohd Fauzi (2011) The effect of vortex trap on helicopter blade lift. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Yee , See Khee (2009) Equivalent wire model and travelling wave mode method to analyse the radiated emission of a bent microstrip line. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Yaacob, Mohd Asmedi (2008) Pengaruh penginapan ke atas disiplin pelajar di Universiti Tun Hussein Onn Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Yusof , Hanita (2008) Three-dimensional plant modeling and simulation : how far does recent computer technology expand to assist the landscape architecture practice. Masters thesis, University of New South Wales.

Yunus, Fazlina (2007) Kepimpinan autentik dalam pendidikan teknik dan vokasional (PTV) di Politeknik. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Yunus, Fazlina (2007) Kepimpinan autentik dalam pendidikan teknik dan vokasional (PTV) di Politeknik. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Yusuf , Siti Idzura (2006) Simulation, fabrication and characterization of PMOS transistor device. Masters thesis, Kolej Universiti Teknologi Tun Hussein.

Yasak, Zurina (2006) Pembangunan dan penilaian laman web berasaskan taksonomi simpson bagi tajuk kemahiran mendirisiap alat teodolit untuk mata pelajaran ilmu ukur. Masters thesis, Universiti Teknologi Malaysia.

Yaacob , Zaihar (2005) Successive over relaxation technique for steady state and dynamic characteristics of a cylindrical bore bearing. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Yahya, Mohd Shahir (2005) Designing of public vehicle driver's seat. Masters thesis, Universiti Putra Malaysia.

Yusop, Yusmarnita (2004) A study in industrial robot programming. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Yusof, Muhamad Sujairi (2004) Aplikasi pengajaran dan pembelajaran berasaskan laman web bagi prosedur amali Perkhidmatan Bangunan (C434) di Politeknik Sultan Abdul Halim Mu'adzam Shah (POLIMAS). Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Yahya, Noor Faizah (2004) Persepsi pelajar terhadap keberkesanan pengajaran guru pengajian keusahawanan : satu kajian di Sekolah Menengah Teknik Alor Setar, Kedah. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Yahya, Siti Noor Saadah (2003) Pembangunan dan penilaian modul pembelajaran kendiri sistem catatan bergu (mpscb). kajian pelajar semester satu, Jabatan Perdagangan, POLIMAS. Masters thesis, Fakulti Kejuruteraan.

Yusof, Suhaili (2003) Kajian keberkesanan penggunaan cakera padat microsoft power point dalam proses P&P bagi subjek Perakaunan Kewangan Satu di Politeknik. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Yahya, Nur Aziyati (2003) Kajian terhadap tahap persediaan pelajar Diploma Akauntasi politeknik berdasarkan kriteria pekerja yang dikehendaki majikan di firma audit. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Yusof, Yusnita (2003) Kompetensi pensyarah dalam proses pengajaran:satu kajian di Politeknik Port Dickson. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Ya'akob, Hashamuddin (2003) Pendekatan web dalam pengajaran dan pembelajaran bagi kursus Pembangunan Keusahawanan di Politeknik Ungku Omar. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Yusoff, Rosni (2003) Penghasilan e-modul dalam pembangunan kurikulum Kajidaya Bahan di politeknik. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Yusof, Zuhaila (2003) Pembangunan dan penilaian panduan keselamatan di bilik dapur bagi pengajaran dan pembelajaran dalam pengurusan hotel katering. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Yurani, Fadilah (2003) Pembinaan modul pembelajaran kendiri melalui laman web dalam matapelajaran pembuatan perabot bagi pelajar berkeperluan khas (pekak) Sekolah Pendidikan Khas Shah Alam. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Yusof , Mohd Faizal (2003) Persepsi pelajar diploma kejuruteraan awam, KUiTTHO terhadap manual pengendalian dan penyelenggaraan mesin pengetam kayu. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Yunus, Zarina (2003) Kajian untuk mengenalpasti tahap ciri-ciri kecerdasan emosi (EQ) dikalangan pelajar dalam proses pengajaran & pembelajaran (P&P). Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Yee, Wui Chee (2002) Penghasilan modul komunikasi juru ukur tanah. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Yasin, Ahmad Kassim (2001) Penilaian perlaksanaan sistem pensijilan terbuka : satu tinjauan ke atas pelajar tingkatan lima aliran teknik, Sekolah Menengah Teknik Batu Pahat, Johor. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Yunus, Suhairi (2001) Tahap penggunaan komputer di kalangan pelajar Sarjana Pendidikan (Teknikal) semester 1, 2 dan 3 di Kolej Universiti Teknologi Tun Hussein Onn (KUiTTHO): kearah bakal pendidik yang 'computer literate'. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Yusoff, Ahamd Fikri and Abu Samah, Faizal and Moharad, Nor Aini (2001) Penilaian terhadap pengaruh reka bentuk studio dan kemudahan teknologi ke atas peningkatan kemahiran pelajar senibina : satu kajian kes di salah sebuah politeknik di pantai barat Semenanjung Malaysia. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Z

Zamri, Muhammad Aliff (2018) Potential of broken high voltage insulator to serve transmission line system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zainudin, Amira Syuhada (2017) Dynamic weighted idle time heuristic for flowshop scheduling. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zulkipli, Muhammad (2017) Electrical-field activated sintering and forming of micro-components. PhD thesis, University of Strathclyde.

Zulfadly, Teuku Muhammad (2017) Factor of work accident in Indonesian construction site: Medan, Indonesia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zamri, Aina Naseha (2017) Pembangunan kerangka kerja profesional pengurusan harta tanah wakaf (PHTW) di Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zahari, Pauzi (2017) Pembangunan kerangka penyeliaan sekolah yang berkesan di Bintan Kepulauan Riau. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Zainal Abidin, Mohamad Rusydi (2017) Pencirian pelindungan laga tiub silinder fungsi gentian semula jadi/epoksi bergred menggunakan emparan mendatar. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Zayadi, Nadzirah (2017) Performance of powdered and granular sugarcane bagasse activated carbon in removing pollutants of car wash wastewater. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zulkifli, Zuriawahida (2016) Keberkesanan kaedah pembelajaran berasaskan masalah dalam meningkatkan kemahiran berfikir aras tinggi dan menyelesaikan masalah dalam kalangan pelajar. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zainal, Hanim (2016) Kesediaan pensyarah teknikal terhadap pelaksanaan School Enterprise di kolej vokasional wilayah Utara. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zainal, Ahmad (2016) Model kelestarian program TVET berasaskan kompetensi pensyarah dan amalan lestari kolej vokasional. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Zakaria, Jamal Hazri (2016) Sponge media drying using a swirling fluidized bed dryer. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zager Al Saedi, Ahmed Khalaf (2016) An efficient multi join query optimization for relational database management system using swarm intelligence approaches. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Zulkifly, Nurul Shahida (2015) Gas-liquid simulation of an airlift bubble column reactor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zainudin, Siti Zuraidah (2015) Seismic surface wave nondestructive testing system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zulkafli, Mohd Fadhli (2015) Arbitrary Lagrangian-Eulerian form of flowfield dependent variation (ALE-FDV) method for moving boundary problems. PhD thesis, Universiti Islam Antarabangsa Malaysia.

Zulkipli, Nazatul Erma (2015) Dynamic modelling of flexible link aerator with embedded holes to generate dissolved oxygen in tiger prawn pond. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zakaria, Nurul Husna (2015) Evaluation of the ergonomics checklist for office chair. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zainal Abidin, Ahmad Noor Ariff (2015) Non-invasive early diagnosis of deep vein thrombosis. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zainal, Rozlin (2015) Decision making process model for housing developers in Malaysia. PhD thesis, Universiti Teknologi Malaysia.

Zolkhifly, Mohd Azfitry (2015) Fast transient simulation of fernandez surge arrester model on a transmission line using ATP. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zakaria, Siti Nur Umira (2015) Performance investigation of three-phase and single-phase e-core hybrid excitation flux switching motor for hybrid electric vehicle applications. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zainal Abidin, Ahmad Sayuti (2015) Background concentration of airborne microbe in new constructed building. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zainal Abidin, Zainal Zulhilmi (2015) Konflik pengambilan tanah Orang Asli : kajian kes di Johor dan Selangor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zainol, Nur Zainatul Nadra (2015) Konsep adalah dan musawah menurut pemikiran Nasr Hamid Abu Zayd. PhD thesis, Universiti Kebangsaan Malaysia.

Zarwawi, Nur Fatin Fariha (2015) Pelaksanaan pembelajaran melalui buku teks digital dalam memperkasakan pengajaran guru di sekolah. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zulkifli, Nur Umaira (2015) A low power and fast cmos arithmetic logic unit. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zainal, Nurfarina (2014) Rapid melt growth of crystalline germanium for solar energy harvesting applications. PhD thesis, Queen's University of Belfast.

Zolkeplee, Muhammad Qhuzaifah (2014) Development of current control for three phase multilevel inverter. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zahari, Muhammad Nur Hidayat (2014) Development of testing system based on surface wave spectral analysis (SASW) technique. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zambri, Nor Aira (2014) Kawalan dan pengurusan optimum bagi penjana teragih berasaskan sel fuel menggunakan teknik logik kabur dan rangkaian neural. PhD thesis, Universiti Kebangsaan Malaysia.

Zuraidi , Siti Nor Fatimah (2014) Model rangka kerja pemuliharaan struktur fabrik bagi bangunan bersejarah. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zaib, Zairoslawanee (2014) Pemilihan kerjaya pelajar Tingkatan 6 atas di sekolah menengah kluster di Kelantan. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zainal Abidin, Mohamad Rusydi (2014) Pemodelan kotak perlanggaran fungsi bahan bergred berasaskan aluminium untuk rekabentuk perlindung laga. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zainal Ramlan Noorazyze, Sarah Narimah Noorazyze (2014) Performance evaluation of slotted and continuous types wind turbine blade. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zargoun, Ahmed Muftah Ali (2014) Phone virtual environment for RC assistive robot. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zulkefly, Muhamad Yusuf (2014) Titanium dioxide (TiO2) as buffer layer in organic solar cell device. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zainuddin, Najahulfazliah (2014) Unsteady free convection on a horizontal circular cylinder in the presence of heat generation and radiation. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zaidon, Norhidayah (2013) Kesediaan pembimbing dalam pelaksanaan program pembelajaran berasaskan kerja (PBK) di Proton Holdings Berhad, Shah Alam, Selangor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zakaria , Zahariah (2013) Novel scheme for analysing the noise limitations of average and guided soliton communication systems. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Zakaria, Salmi (2013) Analysis and reduction of stimulated raman scattering in DWDM fibre optic communication system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zakariah, Siti Hajar (2013) Beban tugas guru mempengaruhi penggunaan sumber teknologi pendidikan di empat buah Sekolah Menengah Teknik dan Vokasional di Johor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zulkarnain, Maizul Haffin (2013) Design and simulation study of obstacle based passive micromixer. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zakaria, Mohd Sharif (2013) Development of a non-pulsating buck-boost converter with continuous current mode (CCM). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zakaria, Hanis (2013) Effects of storage temperature and storage duration on biodiesel properties, visual appearances, and emission. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zakaria, Haslina (2013) Faktor individu dan faktor persekitaran yang mempengaruhi pemindahan latihan terhadap pencapaian akademik dalam kalangan pelajar fakulti kejuruteraan elektrik UTEM. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zakaria , Normah (2013) Kompetensi mengurus kerjaya dalam kalangan pesara tentera berpangkat rendah. PhD thesis, Universiti Putra Malaysia.

Zaratang , Lucian (2013) Load flow studies on stand alone microgrid system in Ranau, Sabah. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zakaria , Intan Suria (2013) RFID-based indoor positioning of autonomous aid for disable people. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zulkifli, Shamsul Aizam (2012) Energy recovery from landing aircraft. PhD thesis, Loughborough University.

Zainun, Noor Yasmin and Mohd Arish, Nur Aini and Suratkon, Azeanita (2012) Forecasting low cost housing demand in urban area in Malaysia using Artificial Neural Networks (ANN). Other thesis, Universiti Tun Hussein Onn Malaysia.

Zeni, Saltihie (2012) Improving on the network lifetime of clustered-based wireless sensor network using modified leach algorithm. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zamri Tan , Nurul Zakiah (2012) Step-nc code generator for drilling operation using Gen-M. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zaman @ Bujang, Izzuddin and Ali, Yaacub Zaki and Nasoha, Mahyan (2012) Vibration control of structure using multiple passive vibration absorbers. Other thesis, Universiti Tun Hussein Onn Malaysia.

Zulkepli, Masitah (2011) Pembangunan model penentuan keperluan perumahan. Kajian kes: Johor Bahru, Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zainun, Noor Yasmin (2011) Computerized model to forecast low-cost housing demand in urban area in Malaysia using artificial neural networks (ANN). PhD thesis, Loughborough University.

Zainal Abidin, Zuhairiah (2011) Design, modeling and implementation of antennas using electromagnetic bandgap material and defected ground planes. PhD thesis, University of Bradford.

Zainal Abidin, Ahmadun Nijar (2011) An impulsive noise analyser using amplitude probability distribution (APD) for broadband wired communication. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zainal, Shamian (2010) A study on ultra-low power and large-scale design of digital circuit for wireless communications. PhD thesis, Hokkaido University.

Zawawi, Mardhiah (2009) Effectiveness of industrialised building system (IBS) implementation for Malaysian construction industry. Masters thesis, Universiti Teknologi Malaysia.

Zainal Abidin, Norazlin (2008) Kesan penggunaan peta konsep ke atas pencapaian mata pelajaran rekabentuk sistem dalam kalangan pelajar program Ijazah Sarjana Muda Teknologi Maklumat dan Multimedia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zawawi , Mukmin (2008) Alarm design for scada system of assembly cell-200 trainer. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zakaria , Mohamad Fauzi (2007) Development of a driver information system based on onboard diagnostic II communication protocol. Masters thesis, Universiti Putra Malaysia.

Zainal Alam , Siti Nurzakiah (2007) Relationship between problem-based learning experience and self-directed learning readiness. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zulkifli, Ahmad Zawawi (2007) Implikasi iso terhadap pengurusan masa kendiri pensyarah di UTHM. Masters thesis, Fakulti Pendidikan Teknikal.

Zakaria , Normah (2007) Teknik pembelajaran di kalangan pelajar dewasa di Universiti Tun Hussein Onn Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zawawi , Zainilah (2007) Keperluan latihan dalam perkhidmatan ke arah meningkatkan kerjaya juruteknik. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zainal Abidin, Mohd Hazreek (2006) Pendekatan penilaian untuk analisa cerun tanah. Masters thesis, Universiti Teknologi Malaysia.

Zohari, Mohd Hakimi (2005) Kajian keberkesanan penggunaan ethernet dalam sistem pengautomatan pencawang. Masters thesis, Universiti Kebangsaan Malaysia.

Zulkifli , Shamsul Aizam (2005) Simulation of linear feedback control of D-STATCOM for voltage sag mitigation. Masters thesis, Universiti Putra Malaysia.

Zaman, Izzuddin (2005) Study of dynamic behaviour of truck chassis. Masters thesis, Universiti Teknologi Malaysia.

Zakaria, Muhammad Nizam (2005) A study on non-friction contact problem with large deformational analyses. Masters thesis, Saga University.

Zinal, Nabiah (2004) Sensor material characterisation for magnetometer application. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Zainal , Rina Ilyana (2004) Amalan komunikasi berkesan di kalangan usahawan tempatan. Masters thesis, Kolej Universiti teknologi Tun Hussein Onn.

Zakaria, Mohd Zaim (2004) Pembangunan video dokumentari pendidikan bagi mata pelajaran teknologi konkrit. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Zulkifli , Hasliza (2004) Penghasilan manual prosedur kerja amali perpaipan, Jabatan Pendidikan Teknik & Vokasional, Fakulti Teknologi Kejuruteraan, KUiTTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Zainal, Azrina (2004) Pengurusan masa pelajar kejuruteraan Pendididikan Jarak Jauh(PJJ) di Universiti Sains Malaysia (USM): ke arah pembinaan jadual pengurusan masa pelajar kejuruteraan secara jarak jauh. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Zulkefli, Zainordin Firdaus (2004) Penghasilan dan penilaian modul CD pembelajaran Kejuruteraan Awam tingkatan 4. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Zainal, Mohd Shamian (2003) Statistical analysis and filter design for conducted emission noise. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Zakaria, Hamidah (2003) Penghasilan laman web di dalam proses pengajaran dan pembelajaran (P&P) bagi subjek kejuruteraan jalan raya di kalangan pelajar Ijazah Sarjana Muda Kejuruteraan Awam KUiTTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Zakaria, Leilawati (2003) Membangunkan bahan pengajaran berasaskan komputer untuk subjek sistem kenderaan di Kolej Komuniti Bukit Beruang, Melaka. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Zamri, Norman (2003) Pembangunan cakera padat (CD) modul pembelajaran kendiri (MPK) undang-undang kontrak bagi kegunaan pelajar Jabatan Perdagangan di Politeknik Seberang Perai. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Zamhuri, Nur Hani (2003) Penghasilan glosari subjek perakaunan kos di kalangan pelajar semester enam diploma akauntasi : satu tinjauan di Politeknik Sultan Haji Ahmad Shah(POLISAS). Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Zainal, Rizuan (2003) Kajian keberkesanan perlaksanaan program latihan industri Diploma Pengurusan Pelancongan Politeknik Johor Bahru. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Zaini, Mohd Zuhaidir (2003) Laman web pembelajaran elektronik II:pembangunan dan aplikasi strategi pembelajaran. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Zakaria, Farizan (2002) Pembinaan modul sistem pengurusan masa pembelajaran harian bagi pelajar di Kolej Universiti Teknologi Tun Hussein Onn, Batu Pahat, Johor. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Zainal Abidin, Zaimilatun Laila (2001) Kepuasan kerja di kalangan guru-guru sekolah menengah teknik. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

This list was generated on Wed Dec 11 09:07:22 2019 +08.