The influences of basic physical properties of clayey silt and silty sand on its laboratory electrical resistivity value in loose and dense conditions

Zainal Abidin, Mohd Hazreek and Saad, Rosli and Wijeyesekera, Devapriya Chitral and Ahmad, Fauziah and Tajul Baharuddin, Mohamad Faizal and Ahmad Tajudin, Saiful Azhar and Madun, Aziman (2017) The influences of basic physical properties of clayey silt and silty sand on its laboratory electrical resistivity value in loose and dense conditions. Sains Malaysiana, 46 (10). pp. 1959-1969. ISSN 0126-6039

Text AJ 2017 (594).pdf Restricted to Registered users only Download (1MB) | Request a copy

Abstract

Non-destructive test which refers to electrical resistivity method is recently popular in engineering, environmental, archaeological and mining studies. Based on the previous studies, the results on electrical resistivity interpretation were often debated due to lack of clarification and evidences in quantitative perspective. Traditionally, most of the previous result interpretations were depending on qualitative point of view which is risky to produce unreliable outcomes. In order to minimise those problems, this study has performed a laboratory experiment on soil box electrical resistivity test which was supported by an additional basic physical properties of soil test like particle size distribution test (d), moisture content test (w), density test (ρbulk) and Atterberg limit test (LL, PL and PI). The test was performed to establish a series of electrical resistivity value (ERV) with different quantity of water content for clayey silt and silty sand in loose and dense condition. Apparently, the soil resistivity value was different under loose (L) and dense (C) conditions with moisture content and density variations (silty SAND = ERVLoose: 600 - 7300 Ωm & ERVDense: 490 - 7900 Ωm while Clayey SILT = ERVLoose: 13 - 7700 Ωm & ERVDense: 14 - 8400 Ωm) due to several factors. Moreover, correlation of moisture content (w) and density (ρbulk) due to the ERV was established as follows; Silty SAND: w(L) = 638.8ρ-0.418, w(D) = 1397.1ρ-0.574, ρBulk(L) = 2.6188e-6E-05ρ, ρBulk(D) = 4.099ρ-0.07 while Clayey SILT: w(L) = 109.98ρ-0.268, w(D) = 121.88ρ-0.363, ρBulk(L) = -0.111ln(ρ) + 1.7605, ρBulk(D) = 2.5991ρ-0.037 with determination coefficients, R2 that varied from 0.5643 – 0.8927. This study was successfully demonstrated that the consistency of ERV was greatly influenced by the variation of soil basic physical properties (d, w, ρBulk, LL, PL and PI). Finally, the reliability of the ERV result interpretation can be enhanced due to its ability to produce a meaningful outcome based on supported data from basic geotechnical properties.

Item Type:	Article
Uncontrolled Keywords:	Basic geotechnical properties; Basic physical properties of soil; Correlation of moisture content and density; Laboratory electrical resistivity
Subjects:	T Technology > T Technology (General) T Technology > TA Engineering (General). Civil engineering (General) > TA703-712 Engineering geology. Rock mechanics. Soil mechanics.
Divisions:	Faculty of Engineering Technology > Department of Civil Engineering Technology
Depositing User:	Miss Nur Rasyidah Rosli
Date Deposited:	16 Dec 2021 01:28
Last Modified:	16 Dec 2021 01:28
URI:	http://eprints.uthm.edu.my/id/eprint/4721

Actions (login required)

View Item