Items where Division is "Faculty of Civil Engineering and Built Environment > Department of Civil Engineering : Structural and Materials Engineering" and Year is 2018

A

Abas, Nor Haslinda and Jaafar, Azman and Mat Seman, Ahmad Shakri (2018) Some basic properties of cement board produced by using oil palm Empty Fruit Bunch (EFB) fibre. In: Construction Materials and Technology Series. Penerbit Uthm, Uthm, pp. 77-88. ISBN 978-967-2183-19-8

Abdulrazzaq Azeez, Alyaa (2018) Behavior of concrete-filled pvc tube columns under axial load. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad Jeni, Mohamad Luthfi and Zaini, Mohamad Azrul (2018) Study on Palm Oil Kernel Shell Coarse Aggregate (PKSCA) as replacement material for coarse aggregate in concrete mix. In: Construction Materials and Technology Series. Penerbit Uthm, Uthm, pp. 49-64. ISBN 978-967-2183-19-8

Ahmed Jhatial, Ashfaque (2018) Investigation of green foamed concrete incorporating palm oil fuel ash and eggshell ash as partial cement replacement. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Altlomate, Abdelmajeed and Shahidan, Shahiron and Alatshan, Faesal and Elkher, Mohammed and Ramzi Hannan, Nurul Izzati Raihan and Mohd Zuki, Sharifah Salwa and Sheikh Khalid, Faisal and Wan Ibrahim, Mohd Haziman (2018) Evaluate the expressions of compression strength and UPV relationship. International Journal of Integrated Engineering, 10 (8). pp. 33-37. ISSN 2229-838X

Arafa, S.A. and Mohd Ali, A.Z.B. and Abdul Awal, A.S.M. and Shamsuddin, Shamrul-Mar and Hossain, M. Zakaria (2018) Properties of coated and uncoated biomass aggregates and their effects on the strength and water permeability of pervious geopolymer concrete. International Journal of GEOMATE, 14 (41). pp. 44-51. ISSN 2186-2982

Arshad, Mohd Fadzil and Awang, Haryati and Putra Jaya, Ramadhansyah and Ali, Mohamad Idris and Mohd Yusak, Mohd Ibrahim and Hainin, Mohd Rosli and Wan Ibrahim, Mohd Haziman (2018) Effect of nano black rice husk ash on the chemical and physical properties of porous concrete pavement. Journal of Southwest Jiaotong University, 53 (5). pp. 1-6. ISSN 0258-2724

Awaludin, Ali and Shahidan, Shahiron and Basuki, Achmad and Mohd Zuki, Sharifah Salwa (2018) Laminated Veneer Lumber (LVL) sengon: an innovative sustainable building material in Indonesia. International Journal of Integrated Engineering, 10 (1). pp. 17-22. ISSN 2229-838X

Azmi, Nurul Bazilah (2018) Performance of composite sand cement brick containing recycled concrete aggregate and waste polyethylene terepthalate. Masters thesis, Universiti Tun Hussein Onn Malaysia.

C

Chai, Teck Jung and Tang, Hing Kwong and Koh, Heng Boon (2018) Water absorption and drying shrinkage of recycled foamed aggregate concrete. Malaysian Journal of Civil Engineering, 30 (3). pp. 466-476. ISSN 2600-9498

Chee Kang, Neo and Osman, Mohammad Hairi and Adnan, Suraya Hani (2018) Use of waste optical disc in concrete to promote Sustainable development in construction industry. In: Construction Materials and Technology Series. Penerbit Uthm, Uthm, pp. 123-138. ISBN 978-967-2183-19-8

D

Deraman, Rafikullah and Abdullah, Abd Halid bin and Nagapan, Sasitharan and Abas, Nor Haslinda and Suratkon, Azeanita Binti and Hasmori, Mohd Fikri (2018) Improving thermal conductivity of fired clay brick using sawdust waste. Asian Journal of Technical Vocational Education And Training, 4. pp. 1-8. ISSN 0128-0600

J

Jamellodin, Zalipah and Jamaly, Mohamad Arif and Nor Azhar, Norazreen and A. Majid, Masni and Salleh, Norhafizah and Abdul Hamid, Noor Azlina and Adnan, Suraya Hani (2018) Binary effect of palm oil fuel ash and eggshell waste powder on heat of hydration for mortar. International Journal of Engineering and Technology, 7 (4.22). pp. 27-30. ISSN 2227-524X

K

Keong, Tan Kok and Chee Ming, Chan and Abdul Rashid, Azrin Hani (2018) Protective coating for gabion wires against weathering elements and site conditions. In: Construction Materials and Technology Series. Penerbit Uthm, Uthm, pp. 105-122. ISBN 978-967-2183-19-8

Khairi, Supar and H., Ahmad (2018) Strength predictions of multi-bolted joints in woven fabric kenaf composite plates with different configurations using xfem frameworks. Trends in Textile Engineering & Fashion Technology, 2 (3). pp. 1-10. ISSN 2578-0271

Khalaf Al-Alwani, Anas Qasim (2018) Self compacting concrete containing polypropylene fibre and its behaviour as wall panel under cyclic load. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Khalid, F.S. and Irwan, J.M. and Ibrahim, M.H. Wan and Othman, N. and Shahidan, S. (2018) Splitting tensile and pullout behavior of synthetic wastes as fiber-reinforced concrete. Construction and Building Materials, 171. pp. 54-64. ISSN 0950-0618

L

Lakhiar, Muhammad Tahir and Mohamad, Noridah and Shaikh, Muhammad Abu Bakar and Ahmed Vighio, Anees and Ahmed Jhatial, Ashfaque and Abdul Samad, Abdul Aziz (2018) Effect of river indus sand on concrete tensile strength. Engineering, Technology and Applied Science Research, 8 (2). pp. 2796-2798. ISSN 2241-4487

Lee, Sim Yee (2018) Experimental study and numerical modelling of woven fabric kenaf fiber composites hybrid adhesively bonded-bolted joints. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

M

Ma, Chau-Khun and Awang, Abdullah Zawawi and Omar, Wahid and Sarbini, Noor Nabilah and Shahidan, Shahiron (2018) State of the art on pre-tensioning steel straps confinement: literature review. Malaysian Construction Research Journal (MCRJ), 4 (2). pp. 210-220. ISSN 1985-3807

Mangi, Sajjad Ali and Wan Ibrahim, Mohd Haziman and Jamaluddin, Norwati and Shahidan, Shahiron and Arshad, Mohd Fadzil and Memon, Sheeraz Ahmed and Putra Jaya, Ramadhansyah and Mudjanarko, Sri Wiwoho and Setiawan, Muhammad Ikhsan (2018) Influence of ground coal bottom ash on the properties of concrete. International Journal of Sustainable Construction Engineering and Technology (IJSCET), 9 (2). pp. 2180-3242. ISSN 2180-3242

Md. Rohani, Munzilah and Mohd. Nawi, Nafhah Nabiha and Daniel, Basil David and Aman, Mohd. Yusri and Buhari, Rosnawati and Ambak, Kamaruddin (2018) An overview of bus drivers and accident involvement. Advanced Science Letters, 24 (11). pp. 8683-8686. ISSN 1936-6612

Meghzil, Sif Allah (2018) The hybrid of floating stone column by numerical and physical evaluation. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Miyahara, Masato and Ijima, Katsushi and Obiya, Hiroyuki and Zakaria, Muhammad Nizam bin (2018) An accurate algorithm of numerical integration for computing seismic responses of inelastic structures. International Journal of Integrated Engineering, 10 (2). pp. 82-86. ISSN 2229-838X

Mohamad, N. and A. Samad, A. A. and Lakhiar, Muhammad Tahir and Mydin, Md Azree Othuman and Jusoh, Suriani and A., Sofia and Efendi, Suaidi Azis (2018) Effects of incorporating banana skin powder (BSP) and palm oil fuel ash (POFA) on mechanical properties of lightweight foamed concrete. International Journal of Integrated Engineering, 10 (9). pp. 169-176. ISSN 2229-838X

Mohamad, Noridah and Lakhiar, Muhammad Tahir and Mansor, Mohamad Syafiq and Koh, Heng Boon and Ahmed Jhatial, Ashfaque and Abdul Samad, Abdul Aziz and Goh, Wan Inn (2018) Computational analysis on flexural behavior of precast aerated concrete panel incorporating polypropylene fiber. International Journal of Engineering and Technology, 7 (3.4). pp. 209-212. ISSN 2227-524X

Mohamed Nazri, Fadzli and Mou_d Kassem, Moustafa and Shahidan, Shahiron and Mohd Zuki, Sharifah Salwa and Sooria, Sherliza Zaini (2018) Assessment for the progressive collapse of moment resisting frame structures using a practiced-oriented method. ASM Science Journal, 11 (3). pp. 167-181. ISSN 18236782

Mohammed Usman, Abdullahi and Abdullah, Kamil (2018) Comparative study on the Malaysian sustainable building rating systems. International Journal of Integrated Engineering, 10 (3). pp. 69-77. ISSN 2600-7916

Mohd Anuar, Mohd Aliff (2018) Palm oil shell aggregate as cool pavement by replacing fine aggregate. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Asharuddin, Syazwani and Othman, Norzila and Mohd Zin, Nur Shaylinda and Tajarudin, Husnul Azan and Md. Din, Mohd Fadhil and Kumar, Vicky (2018) Performance assessment of cassava peel starch and alum as dual coagulant for turbidity removal in dam water. International Journal of Integrated Engineering, 10 (4). pp. 185-192. ISSN 2229-838X

Mohd Azaman, N.A. and Abd Ghafar, N.H. and Azhar, A.F. and Fauzi, A. A. and Ismail, H. A. and Syed Idrus, S. S. and Mokhjar, S. S. and Abd Hamid, F.F. (2018) Investigation of concrete floor vibration using heel-drop, test. Journal of Physics: Conference Series, 995. pp. 1-8. ISSN 1742-6588

Mohd Fodzi, Muhammad Haikal and Ahmad Jeni, Mohamad Luthfi (2018) The study of used of ceramic industrial waste as replacement material of fine aggregate in concrete mix. In: Construction Materials and Technology Series. Penerbit Uthm, Uthm, pp. 89-104. ISBN 978-967-2183-19-8

Mohd Hasan, Mohd Rosli and You, Zhanping and Mohd Satar, Mohd Khairul Idham and Mohd Warid, Muhammad Naqiuddin and Mohd Kamaruddin, Nurul Hidayah and Ge, Dongdong and Zhang, Ran (2018) Effects of titanate coupling agent on engineering properties of asphalt binders and mixtures incorporating LLDPE-CaCO3 Pellet. Applied Sciences, 8 (7). pp. 1-15. ISSN 2076-3417

Mohd Zailani, Tarmidzi and Adnan, Suraya Hani and Abdullah, Mohd Sufyan (2018) The performance on concrete brick containing Palm Oil Fuel Ash (POFA) as replacing cement. In: Construction Materials and Technology Series. Penerbit Uthm, Uthm, pp. 65-76. ISBN 978-967-2183-19-8

Mydin, Md Azree Othuman and Mohd Nawi, Mohd Nasrun and Che Munaaim, Muhammad Arkam and Mohamad, Noridah and Abdul Samad, Abdul Aziz and Johar, Izwan (2018) Effect of steel fibre volume fraction on thermal performance of lightweight foamed mortar (LFM) at ambient temperature. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 47 (1). pp. 119-126. ISSN 2289-7879

N

Nizam, Z. M. and Obiya, H. and Ijima, K. and Azhar, A. T. S. and Hazreek, Z. A. M. and Mohd Zin, Nur Shaylinda (2018) The evaluation of shear deformation for contact analysis with large displacement. Journal of Physics: Conference Series, 995. pp. 1-11. ISSN 1742-6588

O

Omar Imohamed, Imohamed Ali (2018) Shear strength of concrete beams reinforced with glass fiber reinforced polymer bars without stirrups. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

P

Putra Jaya, Ramadhansyah and Hainin, Mohd Rosli and Wan Ibrahim, Mohd Haziman and Nazri, Fadzli Mohamed and Arshad, Mohd Fadzil and Muthusamy, Khairunisa (2018) Physical and chemical properties of rice husk ash concrete under seawater. International Journal of Integrated Engineering, 10 (4). pp. 165-168. ISSN 2229-838X

R

Rahmat, Siti Nazahiyah and Saeed Abduh, Algheethi Adel Ali and Mohd Ali, Ahmad Zurisman and Mohammad Razi, Mohd Adib and Adnan, Mohd Shalahuddin (2018) Field performance of a constructed litter trap with oil and grease filter using low-cost materials. International Journal of Integrated Engineering, 10 (2). pp. 128-131. ISSN 2229-838X

Rassiah, Kannan and Megat Ahmad, M. M. H. and Ali, Aidy and Abdullah, Abd Halid and Nagapan, Sasitharan (2018) Mechanical properties of layered laminated woven bamboo gigantochloa scortechinii/epoxy composites. Journal of Polymers and the Environment, 26 (4). 1328 - 1342. ISSN 1566-2543

S

Saiful Bahari, Nur Amira Afiza (2018) Analysing method for acoustic emission clustering system on reinforced concrete beam. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Salleh, Norhafizah and Mohd Sam, Abdul Rahman and Mohd Yatim, Jamalludin and A. Khalid, Nur Hafizah and Abdul Hamid, Noor Azlina and Jamellodin, Zalipah and A. Majid, Masni (2018) Effect of CFRP plate length on flexural behavior of GFRP reinforced concrete beam strengthening. Advanced Science Letters, 24 (6). pp. 3968-3973. ISSN 1936-6612

Shahidan, S. and Ranle, N. A. and Mohd Zuki, S. S. and Khalid, F. Sheikh and Ridzuan, A. R. M. and Nazri, F. M. (2018) Concrete incorporated with optimum percentages of recycled Polyethylene Terephthalate (PET) bottle fiber. International Journal of Integrated Engineering, 10 (1). pp. 1-8. ISSN 2229-838X

Siang, Alvin John Lim Meng and Yi, Sim Sy and Yonis Buswig, Yonis Mohammed and Anting, Nickholas (2018) Relationship between undrained shear strength (su) and consolidation ratio for marine soft clay. In: Malaysian construction research journal (MCRJ). Penerbit Uthm, Uthm, pp. 81-87.

Sohu, Samiullah and Abdullah, Abd Halid Bin and Ahmed Memon, Bashir and Nagapan, Sasitharan and Kareem Bhatti, Nadeem Ul (2018) Mitigation measures for significant factors instigating cost overrun in highway projects. Civil Engineering Journal, 4 (10). pp. 2338-2344. ISSN 2476-3055

Soon Ern, Peniel Ang and Ali, Roslinda and Yang, Ooi Chee (2018) A study on schedule management for BIM projects in the construction industry. In: Construction Materials and Technology Series. Penerbit Uthm, Uthm, pp. 139-150. ISBN 978-967-2183-19-8

Soon Ern, Peniel Ang and Mei Ling, Lim (2018) Study on thermal performance of Precast Concrete Sandwich Panel (PCSP) design for sustainable built environment. In: Construction Materials and Technology Series. Penerbit Uthm, Uthm, pp. 31-48. ISBN 978-967-2183-19-8

Supar, Khairi and Ahmad, Hilton@Mohd Hilton (2018) 2-D strength prediction of single-row multi-bolted joints woven fabric kenaf composites. International Journal of Engineering & Technology, 7 (3.7). pp. 21-24. ISSN 2227-524X

T

Tahir, Muhammad (2018) Structural performance of precast self-compacting concrete beam consisiting banana skin powder and coir fibre under flexural load. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Tambichik, Muhammad Afiq and Abdul Samad, Abdul Aziz and Mohamad, Noridah and Mohd Ali, Ahmad Zurisman and Mydin, Md Azree Othuman and Mohd Bosro, Mohamad Zulhairi and Iman, Muhamad Afif (2018) Effect of combining palm oil fuel ash (POFA) and rice husk ash (RHA) as partial cement replacement to the compressive strength of concrete. International Journal of Integrated Engineering, 10 (8). pp. 61-67. ISSN 2229-838X

Tanaka, Koki and Ijima, Katsushi and Obiya, Hiroyuki and Zakaria, Muhammad Nizam bin (2018) Mechanically rational forms of curved surface structures shaped from the uniform strain elements. International Journal of Integrated Engineering, 24 (6). pp. 87-92. ISSN 2229-838X

Teddy, T. and J.M., Irwan and Othman, N. and Gani, P. (2018) Bio-concrete on chloride condition: effect on compressive strength and water penetration. Malaysian Construction Research Journal (MCRJ), 4 (2). pp. 129-140. ISSN 2590 - 4140

Tuan Ismail, Tuan Noor Hasanah and Wijeyesekera, Devapriya Chitra and Mohd Yusoff, Aima Nadia and Lim Meng Siang, Alvin John (2018) Improvement of soft soil stiffness using geo-composite cellular mat. In: Construction Materials and Technology Series. Penerbit Uthm, Uthm, pp. 17-30. ISBN 978-967-2183-19-8

W

Wan Mohammad, Wan Ahmad Soffian (2018) Campuran abu kulit kupang (Perna Veridis) sebagai bahan gantian separa simen di dalam konkrit. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Wan Nazri, Wan Muhammad Hafizuddin (2018) Experimental evaluation of new pipe sleeve with weep holes for concrete leakage prevention. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Wan Yusof, Wan Yuslinda (2018) Textile fine grined mortar containing palm oil fuel ash as a partial cement replacement for flexural strengthening on reinforced concrete beams. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Y

Yeo, Shi Wei (2018) Physical and chemical properties of artificial soil with humified and non-humified organic matters. Masters thesis, Universiti Tun Hussein Onn Malaysia.