Items where Division is "Faculty of Engineering Technology > Department of Mechnical Engineering Technology" and Year is 2018

A

Ahmad, R (2018) The effect of aging time on mechanical and microstructure properties of aa6061 joints welded by gas tungsten arc welding. Juniper Online Journal Material Science, 4 (5). pp. 881-885. ISSN 2575-856X

Ahmad, R (2018) The effect of chromium addition on fluidity, microstructure and mechanical properties of aluminum lm6 cast alloy. International Journal of Material Science and Research, 1 (1). pp. 32-35. ISSN 2638-1559

I

Ishak, I. A. and Ali, M S M and Shaikh Salim, S A Z (2018) Numerical simulation of flow around a simplified high-speed train model using OpenFOAM. "IOP Conference Series: Materials Science and Engineering Journal ", 152 (1). pp. 1-12. ISSN 1757-899X

Ishak, I. A. and Mat Ali, Mohamed Sukri and Shaikh Salim, Sheikh Ahmad Zaki (2018) Mesh size refining for a simulation of flow around a generic train model. Wind and Structures, 24 (3). pp. 223-247. ISSN 1598-6225

Ismail, M. M. and Fawzi, M. and Zulkifli, F. H. and Osman, S. A. (2018) Effects of fuel ratio on performance and emission of diesel-compressed natural gas (CNG) dual fuel engine. Journal of the Society of Automotive Engineers Malaysia, 2 (2). pp. 157-165. ISSN 2600-8092

K

Khalid, Amir and Nursal, Ridwan Saputra and Jacob, Deden Witarsyah and Jaat, Norrizam and Mohamed Sunar, Norshuhaila and Amirnordin, Shahrin Hisham (2018) Effect of ambient temperature on ignition delay, combustion process and emission of biodiesel derived from algae. The International Journal of Integrated Engineering, 10 (4). pp. 43-48. ISSN 2229-838X

M

Madon, Rais Hanizam and Mas Fawzi, Mas Fawzi and Sarwani, Muhamad Khairul Ilman and Osman, S.A. and Razali, Mohd Azahari and Mohammad, Abdul Wahab (2018) Effect of reaction temperature on steam methane reforming’s yield over coated nickel aluminide (Ni3Al) catalyst in micro reactor. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 50 (2). pp. 170-177. ISSN 2289-7879

Mahmood, Salwa and Hassan, Mohd Fahrul and Hemdi, Abdul Rahman and Mat Saman, Muhamad Zameri (2018) Sustainability in the product design: A review of recent development based on LCA. International Journal of Engineering and Technology, 7 (3.7). pp. 54-57. ISSN 2227-524X

Marsi, Noraini and Tan, Ka Seng and Thana Singam, Rupashinii and Mohd Rus, Anika Zafiah and Abdul Rashid, Azrin Hani and Main, Nor Mazlana (2018) Natural pigment based on orange fruit for superhydrophobic dyeing in cotton knitted textile application. International Journal of Engineering and Technology (iJET), 10 (5). pp. 1453-1462. ISSN 2319-8613

P

Panga, Toh Yen and Tao Loa, Terence Shen and Ellenaa, Thierry and Mustafa, Helmy and Babalijaa, Jasmin and Subic, Aleksandar (2018) Fit, stability and comfort assessment of custom-fitted bicycle helmet inner liner designs, based on 3D anthropometric data. Applied Ergonomics, 68. pp. 240-248. ISSN 0003-6870

Prasetijo, Joewono and Mohd Jawi, Z. and Mustafa, M. A. and Zadie, Z. and Majid, H. A. and Roslan, M. H. and Baba, I. and Zulkifli, A. F. H. (2018) Impacts of various high beam headlight intensities on driver visibility and road safety. Journal of the Society of Automotive Engineers Malaysia, 2 (3). pp. 306-314. ISSN 2600-8092

R

Rahmad, R. and Abdul Rahman, Z.A.R (2018) Study of apple packaging material properties by using parchment and recycled paper. Journal of Science and Technology, 10 (4). pp. 60-63. ISSN 1823-5034

Rahmad, R. and Ahmad Sukri, A. S. (2018) Sound absorption of palm coir fiber. Journal of Science and Technology, 10 (4). pp. 55-59. ISSN 2600-7924

Raja Mamat, Tengku Nur Azila and Mat Saman, Muhamad Zameri and Sharif, Safian and Simic, Vladimir and Abd Wahab, Dzuraidah (2018) Development of a performance evaluation tool for end-of-life vehicle management system implementation using the analytic hierarchy process. Waste Management and Research (WMR), 36 (12). pp. 1210-1222. ISSN 0734-242X

Razali, Muhammad Faiz (2018) High pressure processing (HPP) of kelulut honey (Sarawak): enhancement on the quality and alteration of prebiotic potential on lactobacillu. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Roslan, M. Nazrul and Yahya, M. Yazid and Ahmad, Z. and A.R., Azrin Hani (2018) Energy absorption behaviour of braided basalt composite tube. Advanced Composite Materials, 27 (5). pp. 467-481. ISSN 0924-3046

S

Salim, Yusuf and Yahya, M. Y. and Israr, H. A. and Azwan, S. and Roslan, M. N. and Abdullah, M. N. (2018) Oblique impact behavior of unidirectional natural fiber reinforced composites. International Journal of Advanced and Applied Sciences, 5 (2). pp. 161-164. ISSN 2313-626X

Shaari, Muhammad Farid and Samad, Zahurin and Lim, Chong Hooi and Abdul Aziz, Mohd Sharizal and Abdul Rashid, Azrin Hani and Mahmood, Salwa (2018) Numerical simulation analysis on water jet pressure distribution at various nozzle aperture. Advanced Science Letters, 24 (11). pp. 8808-8811. ISSN 1936-6612

Shaari, Norlida and Hariri, Azian and Paiman, Nuur Azreen and Nasir, Nurul Fitriah and Nordin, Normayati and Ainuddin, Ainun Rahmahwati and Mat Isa, Norasikin (2018) Preliminary reliability study of computerized neurobehavioural test method. International Journal of Integrated Engineering, 10 (5). pp. 99-108. ISSN 2229-838X

Shiau, Wei Chan and Ahmad, M.F. and Zaman, Izzuddin and Woan, Shin Ko (2018) Employers’ perception on important employability skills in the manufacturing industry. International Journal of Engineering & Technology, 7 (2.29). pp. 170-175. ISSN 2227-524X

T

Thierry, Ellena and Mustafa, Helmy and Subic, Aleksandar and Pang, Toh Yen (2018) A design framework for the mass customisation of custom-fit bicycle helmet models. International Journal of Industrial Ergonomics, 64. pp. 122-133. ISSN 0169-8141

Tukiman, Mohd Mustaqim and Osman, S.A. and Fawzi, Mas and Mustaffa, Norrizal and Madon, Rais Hanizam (2018) Effect of performance and exhaust emission using liquid phase LPG sequential injection as an alternative fuel in spark ignition engine. International Journal of Integrated Engineering, 10 (8). pp. 223-230. ISSN 2229-838X

W

W Abdul Rahman, Wan Fakhrurrazi (2018) Comparison of performance and emission characteristics between ceramic and metallic catalytic converter. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Wan Ikhsan, Syarifah Nazirah and Yusof, Norhaniza and Aziz, Farhana and Misdan, Nurasyikin and Ismail, Ahmad Fauzi and Lau, Woei-Jye and Jaafar, Juhana and Wan Salleh, Wan Norharyati and Hairom, Nur Hanis Hayati (2018) Efficient separation of oily wastewater using polyethersulfone mixed matrix membrane incorporated with halloysite nanotube-hydrous ferric oxide nanoparticle. Separation and Purification Technology, 199. pp. 161-169. ISSN 1383-5866

Z

Zainal Bakri, Siti Farhana and Hariri, Azian and Ismail, Marzuki and Kassim, Nazrul Idzham (2018) Evaluation of respiratory symptoms, spirometric lung patterns and metal fume concentrations among welders in indoor air-conditioned building at Malaysia. International Journal of Integrated Engineering, 10 (5). pp. 109-121. ISSN 2229-838X

Zainuri, Nur Zarifah and Hairom, Nur Hanis Hayati and Abu Bakar Sidik, Dilaelyana and Desa, Amira Liyana and Misdan, Nurasyikin and Yusof, Norhaniza and Mohammad, Abdul Wahab (2018) Palm oil mill secondary effluent (POMSE) treatment via photocatalysis process in presence of ZnO-PEG nanoparticles. Journal of Water Process Engineering, 26. pp. 10-16. ISSN 2214-7144