Assessment of thermal conductivity and indoor air quality of fired clay brick incorporated with electroplating sludge

Abdul Kadir, Aeslina and Amir Detho, Amir Detho and Hashim, Azini Amiza and Mat Rozi, Nur Hidayah (2023) Assessment of thermal conductivity and indoor air quality of fired clay brick incorporated with electroplating sludge. Results in Engineering, 18. pp. 1-6.

[img] Text
J16100_321c4b02f0e481263b575f820bf00594.pdf
Restricted to Registered users only

Download (2MB) | Request a copy

Abstract

Industrial activity is one of the main contributors in developing and growth of economy in Malaysia. Industries and agricultures in Malaysia, generate harmful waste which, if not properly disposed of can damage to landfills and the environment. Brick is one of an important masonry unit needed as building materials. This paper addresses the thermal conductivity and Indoor Air Quality (IAQ) when the fired clay bricks are combined with electroplating sludge (ES). The fired clay bricks were examined using five different ratios 2%, 4%, 6%, 8% and 10%. The X-ray Fluorescence (XRF) result showed that the highest percentage of electroplating sludge composition was aluminium oxide (Al2O3) which is 67.20%. The clay soil showed that the highest percentage of silicon dioxide (SiO2) and aluminium oxide (Al2O3) which was 67.60% and 19.70%, respectively. The IAQ result of carbon dioxide (CO2), carbon monoxide (CO), ozone (O3), formaldehyde (HCHO) and particulate matter (PM10) of fired clay brick with 4% of electroplating sludge was acceptable and safe to be used as building material as it had the most lower gas emissions and compared to the control brick with 0% of sludge. Moreover, all parameters in every pattern did not have much contrast with the limit by Industry Code of Practice on Indoor Air Quality (ICOP-IAQ) standard. Therefore, electroplating sludge an alternative low-cost material that provides an environmentally friendly disposal method.

Item Type: Article
Uncontrolled Keywords: Electroplating sludge Fired clay brick Thermal conductivity Indoor air quality
Subjects: T Technology > T Technology (General)
Divisions: Faculty of Civil Engineering and Built Environment > Department of Architecture
Depositing User: Mr. Mohamad Zulkhibri Rahmad
Date Deposited: 11 Oct 2023 03:22
Last Modified: 11 Oct 2023 03:22
URI: http://eprints.uthm.edu.my/id/eprint/10055

Actions (login required)

View Item View Item