Microstrip patch array rectenna with harmonic suppression capability for energy harvesting application

Amir, Nur `Aisyah (2018) Microstrip patch array rectenna with harmonic suppression capability for energy harvesting application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

[img]
Preview
Text
24p NUR AISYAH AMIR.pdf

Download (1MB) | Preview
[img] Text (Copyright Declaration)
NUR AISYAH AMIR COPYRIGHT DECLARATION.pdf
Restricted to Repository staff only

Download (2MB) | Request a copy
[img] Text (Full Text)
NUR AISYAH AMIR WATERMARK.pdf
Restricted to Registered users only

Download (10MB) | Request a copy

Abstract

This research proposes a microstrip patch array rectenna for Radio Frequency (RF) energy harvesting at 2.45 GHz. Energy harvesting is a process where energy is derived from external sources which is captured and converted into power supply. External source being used in this research is RF energy. Rectenna is a combination of rectifier circuit and antenna. There are three stages in designing a rectenna system. The first stage is receiving antenna which is designed to have high gain and able to capture the 2.45 GHz signal. In order to yield high gain and suppress the harmonic frequency, microstrip patch array antenna is integrated with electromagnetic bandgap (EBG) and filter. The microstrip patch array antenna is etched on FR-4 substrate with thickness of 1.6 mm and the dielectric constant of 4.4. The antenna is designed and simulated using the Computer Simulation Technology (CST) Microwave Studio software. The effectiveness of the EBG and filter structure for harmonic suppression and gain improvement has been tested. The simulation and measurement results verified that the combination of the array antenna with EBG and filter is efficient in eliminating unwanted frequencies and increase the gain from 3.665 dB to 9.112 dB. In the second stage, seven stages Villard voltage multiplier circuit has been used as a rectifier circuit which converts the RF signal into direct current (DC) power supply. The rectifier is designed and simulated using Advanced Design System (ADS) software. Rectifier circuit prototype is measured and the result indicated that it can convert signal into 0.5V DC power supply. The third stage is the integration of the receiving array antenna and rectifier circuit which successfully produced 0.3V power supply. The tested result in anechoic chamber verified that the rectenna design is able to capture and convert the 2.45 GHZ signal into DC power supply.

Item Type: Thesis (Masters)
Subjects: T Technology > T Technology (General)
Divisions: Faculty of Electrical and Electronic Engineering > Department of Electronic Enngineering
Depositing User: Miss Afiqah Faiqah Mohd Hafiz
Date Deposited: 09 Aug 2022 03:14
Last Modified: 09 Aug 2022 03:14
URI: http://eprints.uthm.edu.my/id/eprint/436

Actions (login required)

View Item View Item