Items where Author is "Abd Rahim, Erween"

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Item Type | No Grouping
Number of items: 24.

Article

Mohid, Zazuli and Warap, N.M. and Ismail, M.I.S. and Ibrahim, Rosziati and Abd Rahim, Erween (2014) Determination of heat flux intensity distribution and laser absorption rate of AlSl D2 tool steel. Applied Mechanics and Materials, 465 . pp. 730-734. ISSN 1662-7482

Mohid, Zazuli and Liman, M.A. and Rahman, M.R.A. and Rafai, Noor Hakim and Abd Rahim, Erween (2014) Dissimilar materials laser welding characteristics of stainless steel and titanium alloy. Applied Mechanics and Materials, 465 . pp. 1060-1064. ISSN 1662-7482

Hassan, Suhaimi and Abd Rahim, Erween and Mohid, Zazuli and Warap, N. M. (2014) Dynamic analysis of micro-milling machine. Applied Mechanics and Materials , 465 . pp. 699-703. ISSN 1660-9336

Mustapa, Mohammad Sukri and Sabdin, Saiful Din and Abd Rahim, Erween and Wahab, Md Saidin and Yusof, Yusri (2014) Effect of heat compression on the tensile strength of PALF/sugarcane bagasse for disposable plate. Applied Mechanics and Materials, 660 . pp. 362-366. ISSN 1662-7482

Ibrahim, Mohd Rasidi and Abd Rahim, Erween and Ghazali, Mohd Imran and Chai, M. H. and Goh, Z. O. (2014) Experimental analysis on ultrasonic assisted turning (UAT) based on innovated tool holder in the scope of dry & wet machining. Applied Mechanics and Materials, 660 . pp. 104-108. ISSN 1662-7482

Abd Rahim, Erween and Warap, N. M. and Mohid, Zazuli and Ibrahim, R. (2014) Investigation on laser assisted micro ball milling of Inconel 718. Applied Mechanics and Materials, 660 . pp. 79-83. ISSN 1662-7482

Mohid, Zazuli and Warap, N. M. and Ibrahim, R. and Abd Rahim, Erween (2014) Laser assisted micro-groove ball milling of Ti6Al4V. Applied Mechanics and Materials, 660 . pp. 55-59. ISSN 1662-7482

Mohid, Zazuli and Warap, N. M. and Hassan, Suhaimi and Ismail, M.I.S. and Ibrahim, Rosziati and Abd Rahim, Erween (2014) Numerical analysis of laser heating for laser assisted micro milling application. Applied Mechanics and Materials, 465 . pp. 720-724. ISSN 1662-7482

Wahab, Md Saidin and Rahman, N. A. and Mohamed, M. A. S. and Abd Rahim, Erween (2014) Optimization of laser cutting parameters on the laminated carbon fibre reinforced plastics (CFRP) composites using DOE Technique. Applied Mechanics and Materials, 660 . pp. 60-64. ISSN 1662-7482

Md Salleh, Salihatun and Abd Kadir, M. S. and Ramlee, M. P. and Abd Rahim, Erween and Jelani, A. R. and Ahmad, M. R. and Kasron, Md Zainorin (2014) The effect carbon fiber pole on hand-arm vibration of palm fruit motorised cutter. Applied Mechanics and Materials, 660 . pp. 521-525. ISSN 1662-7482

Mohd Rasidi, Ibrahim and Abd Rahim, Erween and Ibrahim, A. and Maskam, N. A. and Ghani, S. C. (2014) The effect on the application of coolant and ultrasonic vibration assisted micro milling on machining performance. Applied Mechanics and Materials, 660 . pp. 65-69. ISSN 1662-7482

Talib, Norfazillah and Abd Rahim, Erween (2014) The performance of modified jatropha-oil based trimethylolpropane(TMP) ester on tribology characteristic for sustainable metalworking fluids (MWFs). Applied Mechanics and Materials, 660 . pp. 357-361. ISSN 1662-7482

Abd Rahim, Erween and Sasahara, Hiroyuki (2011) Investigation of tool wear and surface integrity on MQL machining of Ti-GAL-4V using biodegradable oil. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 225 (9). pp. 1505-1511. ISSN 0954-4054

Abd Rahim, Erween and Sasahara, Hiroyuki (2011) A study of the effect of palm oil as MQL lubricant on high speed drilling of titanium alloys. Tribology International, 44 (3). pp. 309-317. ISSN 0301-679X

Abd Rahim, Erween and Sharif, Safian (2009) Evaluation of tool wear mechanism of TiAlN coated tools when drilling Ti-6Al-4V. International Journal of Manufacturing Technology and Management, 17 (4). pp. 327-336. ISSN 1368-2148

Book Section

Abd Rahim, Erween and Warap, Norazlan and Mohid, Zazuli (2015) Thermal-assisted machining of nickel-based alloy. In: Superalloys. Intech Open Access Journal. ISBN 978-953-51-2212-8

Conference or Workshop Item

Mohid, Zazuli and A. Rosely, M. A. and Rafai, Noor Hakim and Rahim, Mohammad Zulafif and Ibrahim, Mohd Rasidi and Abd Rahim, Erween (2016) Laser micro welding of dissimilar material of aluminum and copper alloys. In: 2016 7th International Conference on Manufacturing Science and Technology, 16-18 July 2016, Curtin University Sarawak.

Mustapha, M.A. and Wahab, Md Saidin and Abd Rahim, Erween (2015) Analysis of mouthguard design by using CFD approach. In: International Engineering Research and Innovation Symposium 2015 (IRIS), 12–13 September 2015, Putrajaya, Malaysia.

Mohid, Zazuli and Warap, N. M. and Abd Rahim, Erween (2015) Machining performance of laser assisted micro milling (LAuM) on Ti6A14V. In: 4th International Conference on Advanced Manufacturing Technology (ICAMT 2015), 20-22 September 2015, Johor Bahru, Malaysia.

Tahir, A.F.M. and Abd Rahim, Erween (2015) Study on the laser cutting quality of ultra high strength steel. In: International Conference on Mechanical Engineering Research (ICMER), 18-19 August 2015, Kuantan, Pahang.

Ibrahim, Rasidi and Rafai, Noor Hakim and Abd Rahim, Erween and Kai, Cheng and Hui, Ding (2015) A performance of 2 dimensional ultrasonic vibration assisted milling in cutting force reduction, on aluminium AL6061. In: International Engineering Research and Innovation Symposium 2015 (IRIS), 12–13 September 2015, Putrajaya, Malaysia.

Abd Rahim, Erween and H. Dorairaju, Dhemarani and Asmuin, Norzelawati and Asril Rajo Mantari, Muhammad Hanafi (2014) Determination of mist flow characteristic for MQL technique using particle image velocimetry (PIV) and computer fluid dynamics (CFD). In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Abd Rahim, Erween and Warap, N. M. and Mohid, Zazuli and Ibrahim, R. and Ismail, M. I. S. (2014) Numerical analysis of laser preheating for laser assisted micro milling of inconel 718. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Abd Rahim, Erween and Sia , Chee Kiong and Mohd Nor, Nik Hisyamudin and Selimin, Mohamad Ali (2013) Rekabentuk konsep penuai buah kelapa sawit bermotor elektrik. In: Persidangan Kebangsaan Pertama Program Pemindahan Ilmu (KTP01) Equatorial Hotel, 21-23 Ogos 2013, Bangi.

This list was generated on Sat Sep 23 15:37:40 2017 MYT.