Items where Author is "Abdullah, Haslina"

Group by: Item Type | No Grouping

Jump to: Article | Book Section | Conference or Workshop Item | Thesis

Number of items: 26.

Article

Sabri, Ainaa Mardhiah and Talib, Norfazillah and Mohd Saad, Nur Syazwani Filzah and Abdul Sani, Amiril Sahab and Kunar, Sandip and Ahmad, Said and Abdullah, Haslina and Lee Woon Kiow, Lee Woon Kiow and Salleh, Aslinda (2023) Physical Properties of New Formulation of Hybrid Nanofluid-based Minimum Quantity Lubrication (MQL) from Modified Jatropha Oil as Metalworking Fluid. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 101 (1). pp. 1-10. ISSN 2289-7879

Sabri, Ainaa Mardhiah and Talib, Norfazillah and Mohd Saad, Nur Syazwani Filzah and Abdul San, Amiril Sahab and Said Ahmad, Sandip Kunar and Abdullah, Haslina and Lee Woon Kiow, Lee Woon Kiow and Salleh, Aslinda (2023) Physical Properties of New Formulation of Hybrid Nanofluid-based Minimum Quantity Lubrication (MQL) from Modified Jatropha Oil as Metalworking Fluid. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 101 (1). pp. 17-26. ISSN 2289-7879

Sabri, Ainaa Mardhiah and Talib, Norfazillah and Mohd Saad, Nur Syazwani Filzah and Abdul Sani, Amiril Sahab and Kunar, Sandip and Ahmad, Said and Abdullah, Haslina and Woon Kiow, Lee and Salleh, Aslinda (2023) Physical Properties of New Formulation of Hybrid Nanofluid-based Minimum Quantity Lubrication (MQL) from Modified Jatropha Oil as Metalworking Fluid. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 101 (1). pp. 1-10. ISSN 2289-7879

Sabri, Ainaa Mardhiah and Talib, Norfazillah and Mohd Saad, Nur Syazwani Filzah and Abdul Sani, Amiril Sahab and Sandip Kunar, Sandip Kunar and Ahmad, Said and Abdullah, Haslina and Lee Woon Kiow, Lee Woon Kiow and Salleh, Aslinda (2023) Physical Properties of New Formulation of Hybrid Nanofluid-based Minimum Quantity Lubrication (MQL) from Modified Jatropha Oil as Metalworking Fluid. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 101 (1). pp. 1-10. ISSN 2289-7879

Sabri, Ainaa Mardhiah and Talib, Norfazillah and Mohd Saad, Nur Syazwani Filzah and Amiril Sahab Abdul Sani, Amiril Sahab Abdul Sani and Sandip Kunar, Sandip Kunar and Said Ahmad, Said Ahmad and Abdullah, Haslina and Lee Woon Kiow, Lee Woon Kiow and Salleh, Aslinda (2023) Physical Properties of New Formulation of Hybrid Nanofluid-based Minimum Quantity Lubrication (MQL) from Modified Jatropha Oil as Metalworking Fluid. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 101 (1). pp. 1-10. ISSN 2289-7879

Sim, Pei Chin and Lee, Woon Kiow and Abdullah, Haslina and Talib, Norfazillah and Ong, Pauline and Saleh, Aslinda and Ahmad, Said and Sung, Aun Naa (2022) Prediction of tool wear using machine vision approach. ACADEMIC JOURNAL OF MANUFACTURING ENGINEERING, 20 (1). pp. 108-113.

Abdullah, Haslina and Ramli, Rizauddin and Abd Wahab, Dzuraidaqh (2020) Effect of contour interval on minimization of tool path length in pocket milling process. Journal of Engineering Science and Technology, 15 (5). pp. 3502-3513. ISSN 1823-4690

A Rahman, M N and Mohamad, S S and Marwah, O M F and Masood, Ibrahim and Hassan, M F and Arifin, A M T and Haq, R H A and Ahmad, S and H, F Haw and Abdullah, Haslina (2019) Inter- and intra- observer reliability of the offera method for assessing exposure risk of computer work-related to wmsds. Journal of Physics: Conference Series (JPCS), 1150. pp. 1-8. ISSN 1742-6588

Abdul Haq, Reazul Haq and Marwah, Omar Mohd Faizan and Abdol Rahman, Mohd Nasroll and Ho, Fu Haw and Abdullah, Haslina and Ahmad, Said and Tajul Ariffin, Ahmad Mubarak and Hassan, Mohd Fahrul and Yunos, Muhamad Zaini (2018) Mechanical properties of PCL/PLA/PEG composite blended with different molecular weight (MW) of PEG for Fused Deposition Modelling (FDM) filament wire. The International Journal of Integrated Engineering, 10 (5). pp. 187-192. ISSN 2229-838X

Ahmad, Said and Lajis, Mohd Amri and Abdul Haq, Reazul Haq and Tajul Arifin, Ahmad Mubarak and Abdol Rahman, Mohd Nasrull and Ho, Fu Haw and Abdullah, Haslina and Hassan, Mohd Fahrul (2018) Surface roughness and surface topography of inconel 718 in powder mixed dielectric electrical discharge machining (PMEDM). International Journal of Integrated Engineering: Special issue 2018: Mechanical Engineering, 10 (5). pp. 181-186. ISSN 2229-838X

Abdullah, Haslina and Ramli, Rizauddin and Abd Wahab, Dzuraidah and Abu Qudeiri, Jaber (2016) Minimizing machining airtime motion with an ant colony algorithm. The International Journal of Advanced Manufacturing Technology, 10 (1). pp. 161-165. ISSN 1881-803X

Abdullah, Haslina and Ramli, Rizauddin and Abd Wahab, Dzuraidah and Abu Qudeiri, Jaber (2016) Tool path generation of contour parallel based on ant colony optimisation. Jurnal Teknologi (Sciences & Engineering), 78 (6-9). pp. 31-36. ISSN 0127-9696

Book Section

Talib, Norfazillah and Nagarajan, Sugan and Lee, Woon Kiow and Saleh, Aslinda and Abdullah, Haslina (2020) Microstructure analysis of aluminium metal matrix alloy with silicon carbide and hexogonal boron nitride. In: Mechanical, Materials and Manufacturing Engineering: Case Studies. Penerbit UTHM, pp. 1-11. ISBN 978-967-2389-56-9

Abdullah, Haslina and Zaman, Nizam Nurehsan and Talib, Norfazillah and Lee, Woon Kiow and Saleh, Aslinda and Zakaria, Mohamad Shukri (2020) Minimization of tool path length of drilling process using particle swarm optimization (PSO). In: Mechanical, Materials and Manufacturing Engineering: Case Studies. Penerbit UTHM, pp. 48-56. ISBN 978-967-2389-56-9

Lee, Jia En and Wong, Shih Jye and Lee, Woon Kiow and Talib, Norfazillah and Ong, Pauline and Abdullah, Haslina and Saleh, Aslinda and Mat Hassan, Normunira and Abd Rashid, Razlin (2020) Review on the effect of ceramic reinforcements with different weight percentage and process parameters on the mechanical properties of aluminium metal matrix composite. In: Mechanical, Materials and Manufacturing Engineering: Case Studies. Penerbit UTHM, pp. 28-38. ISBN 978-967-2389-56-9

Conference or Workshop Item

Sabri, Ainaa Mardhiah and Talib, Norfazillah and Abdul Sani, Amiril Sahab and Abdullah, Haslina and Kamdani, Kamaruddin (2023) Tribological study of modified palm oil-with single and hybrid nanofluids for metalworking fluid. In: LECTURE NOTES IN MECHANICAL ENGINEERING.

Talib, Norfazillah and Mohd Azmi, M. K. E. and Jamaluddin, Nor Athira and Woon, Kiow Lee and Abdullah, Haslina and Ahmad, Said and Saleh, Aslinda (2023) Performance investigation of graphene based-nanofluids as a metalworking fluid for turning process. In: AIP Conference Proceedings.

Talib, Norfazillah and Mohd Azmi, M K E and Jamaluddin, Nor Athira and Woon, Kiow Lee and Abdullah, Haslina and Ahmad, Said and Saleh, Aslinda (2023) Performance investigation of graphene based-nanofluids as a metalworking fluid for turning process. In: AIP Conference Proceedings.

Abdullah, Haslina and Zakaria, Mohamad Shukri and Talib, Norfazillah (2023) Study of primary stability of hip implant for semi hip replacement by using finite element analysis. In: Proceedings of the 2nd Human Engineering Symposium, Lecture Notes in Mechanical Engineering.

Abdullah, Haslina and Tuan Zahari, Tuan Muhammad Lutfi and Zakaria, Mohamad Shukri (2018) Simulation of ant colony optimization on hole making performance. In: Innovative research and industrial dialogue 2018, 18 July 2018, UTEM.

Thesis

Abdullah, Haslina (2017) Pengoptimuman jarak laluan mata alat menggunakan algoritma koloni semut untuk proses pengisaran poket. Doctoral thesis, Universiti Kebangsaan Malaysia.

This list was generated on Fri Dec 27 02:26:30 2024 +08.

Export as	Atom RSS 1.0 RSS 2.0