Items where Author is "Azmi, Mohd Azham"

Group by: Item Type | No Grouping

Jump to: Article | Book Section | Conference or Workshop Item | Thesis

Number of items: 31.

Article

Yusop, Umira Asyikin and Osman, Muhammad Nur Fikri and Abdul Ghani, Muhammad Zul Idzham and Azmi, Mohd Azham and Tan Kang Huai, Tan Kang Huai and Baharuddin, Nurul Akidah and Abd Rahman, Hamimah (2023) CHARACTERISATION AND AREA-SPECIFIC RESISTANCE ANALYSIS OF BARIUM STRONTIUM COBALT FERRITE - SAMARIUM DOPED CERIA CARBONATE - ARGENTUM FOR SOLID OXIDE FUEL CELLS. Umira Asyikin Yusop et al. Malaysian Journal of Microscopy, 19 (1). pp. 214-225. ISSN 1823-7010

Yusop, Umira Asyikin and Osman, Muhammad Nur Fikri and Abdul Ghani, Muhammad Zul Idzham and Azmi, Mohd Azham and Kang Huai, Tan and Baharuddin, Nurul Akidah and Abd Rahman, Hamimah (2023) CHARACTERISATION AND AREA-SPECIFIC RESISTANCE ANALYSIS OF BARIUM STRONTIUM COBALT FERRITE - SAMARIUM DOPED CERIA CARBONATE - ARGENTUM FOR SOLID OXIDE FUEL CELLS. Umira Asyikin Yusop et al. Malaysian Journal of Microscopy, 19 (1). pp. 214-225. ISSN 1823-7010

Yusop, Umira Asyikin and Abd Rahman, Nurul Farhana and Anak Lowrance, Yohannes Nyambong and Jaidi, Zolhafizi and Tukimon, Mohd Faizal and Azmi, Mohd Azham and Ismail, Azzura and Mahzan, Shahruddin and Abd Rahman, Hamimah (2022) Effect of nb and zn element doping on barium strontium cobalt ferrite-based cathode for solid oxide fuel cell – a short review. Malaysian Journal of Microscopy, 18 (1). pp. 226-244. ISSN 1823-7010

Abdul Rahman, Nurul Farhana and Abd.Rahman, Hamimah and Azmi, Mohd Azham (2021) Perovskite-type oxide-based dual composite cathode for solid oxide fuel cells: a short review. Solid State Phenomena, 317. pp. 417-425. ISSN 1662-9779

Baharuddin, Nurul Akidah and Abdul Rahman, Nurul Farhana and Abd. Rahman, Hamimah and Somalu, Mahendra Rao and Azmi, Mohd Azham and Raharjo, Jarot (2020) Fabrication of high-quality electrode films for solid oxide fuel cell by screen printing: A review on important processing parameters. International Journal of Energy Research, 44 (11). pp. 8296-8313. ISSN 0363-907X

Muda, Rizamarhaiza and Azmi, Mohd Azham and Mahzan, Shahruddin and Elwalwal, Hatem Mostafa and Ahmad, Sufizar and Taib, H. (2018) Effect of SiO2 solid loading and sintering temperatures on the physical properties of SiO2-NiO foam. Key Engineering Materials, 791. pp. 37-44. ISSN 1662-9795

Azmi, Mohd Azham and Yahya, S.M. and Ahmad, Sufizar and Mahzan, Shahruddin and Taib, M. and Abd.Rahman, Hamimah and Taib, Hariati (2018) Effect of silica (SiO2) filler on thermal stability of polysiloxane composites. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 48 (2). pp. 117-124. ISSN 2289-7879

Book Section

Zakaria, Hanis and Hassan, Suhaimi and Azmi, Mohd Azham (2020) Evaluation on effect of abrasive blasting media to the environment and human safety and health. In: Recent Development in Industrial and Indoor Environment Research Studies. Penerbit UTHM, pp. 1-10. ISBN 978-967-2916-43-7

Zakaria, Hanis and Hassan, Suhaimi and Azmi, Mohd Azham (2020) Reducing air pollution and occupational health risk using palm olein abrasive blasting for metal surface cleaning applications. In: Recent Development in Industrial and Indoor Environment Research Studies. Penerbit UTHM, pp. 11-36. ISBN 978-967-2916-43-7

Conference or Workshop Item

Yusop, Umira Asyikin and Osman, Muhammad Nur Fikri and Jaidi, Zolhafizi and Azmi, Mohd Azham and Ismail, Azzura and Mahzan, Shahruddin and Tan, Kang Huai and Abd. Rahman, Hamimah (2024) Characteristics of BSCF–SDCC–Ag composite cathode powder for low-temperature solid oxide fuel cell. In: AIP Conference Proceedings.

Yusop, Umira Asyikin and Osman, Muhammad Nur Fikri and Jaidi, Zolhafizi and Azmi, Mohd Azham and Ismail, Azzura and Mahzan, Shahruddin and Tan, Kang Huai and Abd Rahman, Hamimah (2024) Characteristics of BSCF–SDCC–Ag composite cathode powder for low-temperature solid oxide fuel cell. In: AIP Conference Proceedings.

Yusop, Umira Asyikin and Osman, Muhammad Nur Fikri and Jaidi, Zolhafizi and Azmi, Mohd Azham and Ismail, Azzura and Mahzan, Shahruddin and Huai, Tan Kang and Abd Rahman, Hamimah (2024) Characteristics of BSCF–SDCC–Ag composite cathode powder for low-temperature solid oxide fuel cell. In: AIP Conference Proceedings.

Jaidi, Zolhafizi and Azmi, Mohd Azham and Mokhtar, Muhammad Akmal and Abd Rahman, Hamimah and Mahzan, Shahruddin and Ismail, Azzura (2024) Study of material characterization of samarium doped ceria rice husk ash silica (SDC-RHASiO2). In: AIP Conference Proceedings.

Jaidi, Zolhafizi and Azmi, Mohd Azham and Mokhtar, Muhammad Akmal and Abd Rahman, Hamimah and Mahzan, Shahruddin and Ismail, Azzura (2024) Study of material characterization of samarium doped ceria-rice husk ash silica (SDC-RHASiO2). In: AIP Conference Proceedings.

Mustaffa, Musfirah and Mohammad Hisyammudden, Muhammad Syahmi and Hassan, Suhaimi and Jumari, Mohamad Zhairul Iqumal and Mat Nadir, Mohamad Amirul and Yusof, N M and Ikhsan, M S and Ismon, Maznan and Zakaria, Hanis and Yusof, M S and Nik Aziz, Nik Nazmi Amir and Hakim, Mohd Farizwan Azmil and Abdul Rahman, Muhammad Fakrul Shakirin and Tabri, Ahmad Faidhi and Azmi, Mohd Azham (2023) Feasibility study of worker safety at highway emergency lane. In: 12th International Conference on Mechanical and Manufacturing Engineering 2022 (ICME’22).

Mustaffa, Musfirah and Hassan, Suhaimi and Mohammad Hisyammudden, Muhammad Syahmi and Iqumal Jumari, Mohamad Zhairul and Mat Nadir, Mohamad Amirul and Yusof, N M and Ikhsan, M S and Ismon, Maznan and Zakaria, Hanis and Faizan Marwah, Omar Mohd and Yusof, M S and Nik Aziz, Nik Nazmi Amir and Hakim, Mohd Farizwan Azmil and Shakirin Abdul Rahman, Muhammad Fakrul and Tabri, Ahmad Faidhi and Azmi, Mohd Azham (2023) Feasibility study of worker safety at highway emergency lane. In: AIP Conference Proceedings.

Mustaffa, Musfirah and Hassan, Suhaimi and Mohammad Hisyammudden, Muhammad Syahmi and Jumari, Mohamad Zhairul Iqumal and Mat Nadir, Mohamad Amirul and Yusof, M.S. and Nik Aziz, Nik Nazmi Amir and Hakim, Mohd Farizwan Azmil and Abdul Rahman, Muhammad Fakrul Shakirin and Tabri, Ahmad Faidhi and Azmi, Mohd Azham (2023) Feasibility study of worker safety at highway emergency lane. In: AIP Conference Proceedings.

Mohammad Hisyammuden, Muhammad Syahmi and Hassan, Suhaimi and Mustaffa, Musfirah and Iqumal Jumari, Mohamad Zhairul and Mohamad Amirul, Mat Nadir and Yusof, N M and Ikhsan, M S and Ismon, Maznan and Zakaria, Hanis and Faizan Marwah, Omar Mohd and Yusof, M S and Nik Aziz, Nik Nazmi Amir and Azmil Hakim, Mohd Farizwan and Abdul Rahman, Muhammad Fakrul Shakirin and Tabri, Ahmad Faidhi and Azmi, Mohd Azham (2023) A review of reliability tests on safety technologies. In: AIP Conference Proceedings.

Mohammad Hisyammuden, Muhammad Syahmi and Hassan, Suhaimi and Mustaffa, Musfirah and Jumari, Mohamad Zhairul Iqumal and Mat Nadir, Mohamad Amirul and Yusof, N M and Ikhsan, M S and Ismon, Maznan and Zakaria, Hanis and Marwah, Omar Mohd Faizan and Yusof, M S and Nik Aziz, Nik Nazmi Amir and Hakim, Mohd Farizwan Azmil and Abdul Rahman, Muhammad Fakrul Shakirin and Tabri, Ahmad Faidhi and Azmi, Mohd Azham (2023) A review of reliability tests on safety technologies. In: 12th International Conference on Mechanical and Manufacturing Engineering 2022 (ICME’22).

Mohammad Hisyammuden, Muhammad Syahmi and Hassan, Suhaimi and Mustaffa, Musfirah and Iqumal Jumari, Mohamad Zhairul and Mat Nadir, Mohamad Amirul and Yusof, N M and Ikhsan, M S and Ismon, Maznan and Zakaria, Hanis and Faizan Marwah, Omar Mohd and Yusof, M S and Nik Aziz, Nik Nazmi Amir and Azmil Hakim, Mohd Farizwan and Abdul Rahman, Muhammad Fakrul Shakirin and Tabri, Ahmad Faidhi and Azmi, Mohd Azham (2023) A review of reliability tests on safety technologies. In: AIP Conference Proceedings.

Mohammad Hisyammuden, Muhammad Syahmi and Hassan, Suhaimi and Mustaffa, Musfirah and Jumari, Mohamad Zhairul Iqumal and Mat Nadir, Mohamad Amirul and Yusof, N. M. and Ikhsan, M. S. and Ismon, Maznan and Zakaria, Hanis and Marwah, Omar Mohd Faizan and Yusof, M. S. and Nik Aziz, Nik Nazmi Amir and Hakim, Mohd Farizwan Azmil and Abdul Rahman, Muhammad Fakrul Shakirin and Tabri, Ahmad Faidhi and Azmi, Mohd Azham (2023) A review of reliability tests on safety technologies. In: AIP Conference Proceedings.

Mustaffa, Musfirah and Hassan, Suhaimi and Mohammad Hisyammudden, Muhammad Syahmi and Jumari, Mohamad Zhairul Iqumal and Mat Nadir, Mohamad Amirul and Yusof, N M and Ikhsan, M S and Ismon, Maznan and Zakaria, Hanis and Marwah, Omar Mohd Faizan and Yusof, M S and Nik Aziz, Nik Nazmi Amir and Hakim, Mohd Farizwan Azmil and Abdul Rahman, Muhammad Fakrul Shakirin and Tabri, Ahmad Faidhi and Azmi, Mohd Azham (2023) Feasibility Study of Worker Safety at Highway Emergency Lane. In: AIP Conference Proceedings.

Yusop, Umira Asyikin and Osman, Muhammad Nur Fikri and Jaidi, Zolhafizi and Azmi, Mohd Azham and Ismail, Azzura and Mahzan, Shahruddin and Tan, Kang Huai and Abd Rahman, Hamimah (2022) Characteristics of BSCF–SDCC–Ag composite cathode powder for low-temperature solid oxide fuel cell. In: AIP Conference Proceedings.

Mustaffa, Musfirah and Hassan, Suhaimi and Mohammad Hisyammudden, Muhammad Syahmi and Jumari, Mohamad Zhairul Iqumal and Mat Nadir, Mohamad Amirul and Yusof, N M and Ikhsan, M S and Ismon, Maznan and Zakaria, Hanis and Marwah, Omar Mohd Faizan and Yusof, M S and Nik Aziz, Nik Nazmi Amir and Hakim, Mohd Farizwan Azmil and Abdul Rahman, Muhammad Fakrul Shakirin and Tabri, Ahmad Faidhi and Azmi, Mohd Azham (2022) Feasibility study of worker safety at highway emergency lane. In: 12TH INTERNATIONAL CONFERENCE ON MECHANICAL AND MANUFACTURING ENGINEERING 2022 (ICME22).

Lowrance, Yohannes Nyambong and Azmi, Mohd Azham and Abdul rahman, Hamimah and Abdul Rahman, Nurul Farhana and Zakaria, Hanis and Hassan, Suhaimi (2022) Influence of Electrophoretic Deposition (EPD) Voltage on SOFC interconnect morphology. In: Key Engineering Materials.

Lowrance, Yohannes Nyambong and Azmi, Mohd Azham and Abdul rahman, Hamimah and Abdul Rahman, Nurul Farhana and Zakaria, Hanis and Hassan, Suhaimi (2022) Influence of Electrophoretic Deposition (EPD) voltage on SOFC interconnect morphology. In: Key Engineering Materials.

Thesis

Azmi, Mohd Azham (2018) Fabrication, characterisation and properties of polysiloxane rice husk silica composites. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Azmi, Mohd Azham (2012) Fabrication and characterisation of sandwich composites of glass fiber skin and polyurethane foamreinforced coconut coir fiber core. Masters thesis, Universiti Tun Hussein Malaysia.

This list was generated on Fri Dec 27 05:32:55 2024 +08.

Export as	Atom RSS 1.0 RSS 2.0