Items where Author is "Sapit, Azwan"

Article

Sapit, Azwan and Shather, Saad Kariem and Abed, Farook Nehad (2021) Parameters analysis in wire electrical discharge machine process of titanium alloys with dielectric alumina. Selection and peer-review under responsibility of the scientific committee of the 3rd International Con�ference on Materials Engineering & Science., 42. pp. 1845-1859.

Shather, Saad Kariem and Sapit, Azwan and Abed, Farook Nehad (2021) Performance of Ti-6242 production using nano powder mixed with different dielectrics. Second International Conference on Aspects of Materials Science and Engineering (ICAMSE 2021), 45. pp. 4490-4497.

Sapit, Azwan and Shather, Saad Kariem and Abed, Farook Nehad (2020) Enhancement of the performance surface roughness of wire cutting process by additives nano [AL2o3]. Periodicals of Engineering and Natural Sciences, 8 (2). pp. 933-941. ISSN 2303-4521

Razali, Ahmad Hadi and Nordin, Normayati and Sapit, Azwan and Alias, Zainal Abidin (2020) Flow through various porosity of circle grid perforated plate with orifice plate flowmeter. Journal of Complex Flow, 2 (1). pp. 1-6. ISSN 2672-7374

Razali, Mohd Azahari and Madon, Rais Hanizam and Mohmad Ja'at, Md Norrizam and Sapit, Azwan and Salleh, Hamidon and Hushim, Mohd Faisal and Zaboon, Waseem Alwan and Samsubaha, Muhammad Fauzi (2020) Investigation of diesel injector flow pattern based on computer-aided design. CFD Letters, 12 (5). pp. 13-23. ISSN 2180-1363

Chua, Bing Liang and Mohammed, Akmal Nizam and Sapit, Azwan and Razali, Mohd Azahari and Hushim, Mohd Faisal and Khalid, Amir and Mohd Yusof, Nurul Farhana (2020) Numerical simulation of aerofoil with flow injection at the upper surface. CFD Letters, 12 (1). pp. 98-110. ISSN 2180-1363

Manshoor, Bukhari and Sapit, Azwan and Nordin, Normayati and Hariri, Azian and Salleh, Hamidon and Razali, Mohd Azahari and Zaman, Izzuddin and Khalid, Amir and Ghazali, Mohd Fairusham and Alsayed, Muneer Khalifa (2020) Simulation of fractal like branching microchannel network on rectangular heat sink for single phase flow. CFD Letters, 12 (2). pp. 69-79. ISSN 2180-1363

Sapit, Azwan and Razali, Mohd Azahari and Hushim, Mohd Faisal and Khalid, Amir and Mohmad Ja'at, Md Norrizam and Samsubaha, Muhammad Fauzi and Tuan A Talib, Tuan Mohamad Kamarul Hisyam (2019) Effect of acoustic excitation toward jet flame: an experimental design. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 53 (1). pp. 69-74. ISSN 2289-7879

Jaber, Ayad Jasim and Abd Balla, Hyder Hassan and Aboaltabooq, Mahdi Hatf Kadhum and Sapit, Azwan (2019) Experimental study of improving the efficiency of photovoltaic cells by using various angles of pneumatic routers. Journal of Green Engineering (JGE), 9 (4). pp. 608-625.

Nehadabed, Farook and Sapit, Azwan and Kariemshather, Saad (2019) An analysis of wire-cut parameters in electric-discharge of titanium alloys. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 9 (4). pp. 1363-1370. ISSN 2249–6890

Sadikin, Azmahani and Mohd Bahrin, Mohd Khairul Anam and Ismail, Azzura and Ismail, Al Emran and Ahmad, Sufizar and Salleh, Salihatun and Abdol Rahman, Mohd Nasrull and Sapit, Azwan and Ayop, Sallehuddin Shah (2018) Numerical simulation in transient flow of non-newtonian fluid in nozzles during filling process. International Journal of Integrated Engineering, 3 (1). pp. 92-95. ISSN 2229-838X

Abbas, Mohammed Saad and Sapit, Azwan and Balla, Hyder Hassan Abd and Haider, Ali Mohammed and Al-Shamani, Ali Najah (2018) A review study on the effect of glass envelope, working fluid and geometry contributions for the receiver on performance of parabolic trough collector (PTC). ARPN Journal of Engineering and Applied Sciences, 13 (20). pp. 8200-8211. ISSN 1819-6608

Sapit, Azwan and Razali, Mohd Azahari and Hushim, Mohd Faisal and Jaat, Norrizam and Mohammad, Akmal Nizam and Khalid, Amir (2017) Comparision on dynamic behavior of diesel spray and rapeseed oil spray in diesel engine. Journal of Physics: Conference Series, 822 (1). pp. 1-7. ISSN 1742-6588

Jaat, Norrizam and Khalid, Amir and Andsaler, Adiba Rhaodah and Sapit, Azwan and Razali, Azahari and Basharie, Mariam (2017) Effects of ambient temperature and injection pressure on biodiesel ignition delay. Journal of Mechanical Engineering and Sciences, 11 (2). pp. 2723-2733. ISSN 2289-4659

Nanihar, Nadiarulah and Khalid, Amir and Mustaffa, Norrizal and Jaat, Norrizam and Sapit, Azwan and Razali, Azahari and Mohamed Sunar, Norshuhaila (2017) Experiment on the effects of storage duration of biodiesel produced from crude palm oil, waste cooking oil and Jatropha. Journal of Physics: Conference Series, 914 (1). pp. 1-8. ISSN 1742-6588

Mohammed, Akmal Nizam and Razali, Mohd Azahari and Sapit, Azwan and Hushim, Mohd Faisal and Osman, Shahrul Azmir and A. Rahman, Mohamad Farid (2017) Numerical study of variable length exhaust pipe in small engine. ARPN Journal of Engineering and Applied Sciences, 12 (7). pp. 2374-2379. ISSN 1819-6608

Hayder, Ali Mohammed and Sapit, Azwan and Abed, Qahtan Adnan (2017) Review of solar thermal storage techniques. ARPN Journal of Engineering and Applied Sciences, 12 (21). pp. 6103-6119. ISSN 1819-6608

Andsaler, Adiba Rhaodah and Khalid, Amir and Abdullah, Nor Sharifhatul Adila and Sapit, Azwan and Jaat, Norrizam (2017) The effect of nozzle diameter, injection pressure and ambient temperature on spray characteristics in diesel engine. Journal of Physics: Conference Series, 822 (NIL). pp. 1-7. ISSN 1742-6588

Sapit, Azwan and Mohammed, Akmal Nizam and Razali, Mohd. Azahari and Hushim, Mohd Faisal Bin and Khalid, Amir and Manshoor, Bukhari (2016) Rapeseed oil spray development of diesel idi spray nozzle under air movement influence. ARPN Journal of Engineering and Applied Sciences, 11 (18). pp. 11183-11187. ISSN 1819-6608

Book Section

Klazly, Mohamad Mehi Alddin and Aliyu, Ruwaidu and Sapit, Azwan and Khalid, Amir (2020) Energy management in biodiesel production. In: Energy Management. Penerbit UTHM, pp. 1-10. ISBN 978-967-2389-38-5

Othman, Amiruddin and Nazri, Ahmad Nazirul and Birahim, Muhamad Fikri Shahkhirin and Khalid, Amir and Jaat, Norrizam and Sapit, Azwan and Razali, Azahari (2020) Hazard identification, risk assessment and risk control: a study at food manufacturing industry. In: Occupational Safety and Health - Case Study. Penerbit UTHM, pp. 141-160. ISBN 978-967-2916-31-4

Victor Subinon, Olivia Calesta and Rosman, Nurul Farah Izzati and Mohd Joharudin, Nurul Farahin and Khalid, Amir and Jaat, Norrizam and Sapit, Azwan and Noranai, Zamri (2020) Occupational safety and health practice: a study at universities’ laboratories. In: Occupational Safety and Health - Case Study. Penerbit UTHM, pp. 43-58. ISBN 978-967-2916-31-4

Maskan, Muhammad Haziq and Mohamad Yusuf, Mohamad Wafi and Khalid, Amir and Ishak, Izuan Amin and Zaman, Izzuddin and Sapit, Azwan (2017) Discussion of the technology and research in fuel injectors common rail system. In: Fuel, Automotive and Engine Technology. Penerbit UTHM, pp. 9-22. ISBN 978-967-2916-32-1