Items where Division is "Faculty of Mechanical and Manufacturing Engineering > FKMP" and Year is 2024

Group by: Creators | Item Type | No Grouping

Jump to: - | A | B | F | H | K | M | N | O | P | R | S | T | W

Number of items: 51.

-

-, Sanusi and -, Shalleh Ahmad Bareduan and -, Larisang and -, Abdul Hamid (2024) Critical Indicators for Sustainable Coconut Supply Chain Using Analytical Network Process. International Journal of Sustainable Development and Planning, 19 (5). pp. 1703-1711.

A

Abdul Shukor, Syahmie Sufi and Ahmad, Sufizar and Rosli, Shahrul Nizam and Abd. Rahman, Hamimah and Mahzan, Shahruddin and Azmi, Mohd. Azham and Ismail, Azzura and Muslem, Firdaus (2024) The effect of sintering temperature of silica water filter produced by slip casting method. In: AIP Conference Proceedings.

Ahmad Wardi, Ahmad Wafri and Hariri, Azian and Nordin, Normayati and Mat Isa, Norasikin and Nasir, Nurul Fitriah and Zakaria, Hanis and Nor Salim, Nor Adrian and Sani, Winardi and Buwono, Haris Puspito (2024) Energy Profiling and Potential Energy Saving of a Keropok Lekor Small Industry. Journal of Advanced Research in Applied Sciences and Engineering Technology, 34 (2). pp. 195-209. ISSN 2462-1943

Ahmed Adhoni, Zameer and Habelalmateen, Mohammed I and D R, Janardhana and Abdul Sattar, Khalid Nazim and Audah, Lukman (2024) Deep reinforcement learning based resource allocation strategy in cloud-edge computing system. In: 2024 International Conference on Distributed Computing and Optimization Techniques (ICDCOT).

Al-Moayed, Omar Mohammed and M.F, Johan and Ismail, Al Emran and Kareem, Ali Kamil and Jamian, Saifulnizan and Shaker, Sufian Farid and Hamad Abed, Tareq and Aldulaym, Omar Hammad (2024) Interaction Assessment of Stress Intensity Factors of Surface Cracks on Thick Cylinders under Tension Force and Bending Moment. Journal of Advanced Research in Applied Mechanics, 118 (1). pp. 131-143. ISSN 2289-7895

Alimin, Ahmad Jais and Asmat, Fatina and Lee, Clement Nyuk Yin and Subramaniyan, S. Kanna and Osman, Shahrul Azmir and Razali, Mohd Azahari (2024) Carbon footprint reduction potential for diesel-fuelled generators through periodic maintenance using EXORIN treatment. In: AIP Conference Proceedings.

Awang Morni, Dayang Raihanah and Harimon, Mohd Azhar and -, Nafisah Arina Hidayati (2024) Effect of V-shaped Side Groove on Shear Lips Formation of Aluminium Alloy 6061 by Charpy Impact Test. Journal of Advanced Research in Applied Mechanics, 118 (1). pp. 157-166. ISSN 2289-7895

B

Bahr Ennil, Ali and M A Elfaghi, Abdulhafid (2024) Multidisciplinary Optimization of Axial Turbine Blade Based on CFD Modelling and FEA Analysis. Journal of Advanced Research in Applied Mechanics, 120 (1). pp. 40-49. ISSN 2289-7895

F

Farhan Latif, Irfan Alias and Mohd Nor, Mohd Khir and Yusuf, Nur Kamilah and Subramaniyan, S Kanna and Abdul Samad, Mohd Syazwan and Ma’at, Norzarina (2024) Quantitative Characterization of the Perforation Behaviour of Direct Recycled Aluminum Alloy 6061 Plates Subjected to High-Velocity Impact. Journal of Advanced Research in Applied Mechanics, 118 (1). pp. 193-211. ISSN 2289-7895

Fong Mun Kit, Fong Mun Kit and Nicolas Ng Yang Zu, Nicolas Ng Yang Zu and Reazul Haq Abdul Haq, Reazul Haq Abdul Haq and Bukhari Manshoor, Bukhari Manshoor and Mohammad Fahmi Abdul Ghafir, Mohammad Fahmi Abdul Ghafir and Omar Mohd Faizan Marwah, Omar Mohd Faizan Marwah and Jörg Hoffmann, Jörg Hoffmann (2024) Performance Evaluation of Electrode Fabricated by using FDM in DieSinking EDM. Journal of Advanced Research in Applied Sciences and Engineering Technology, 15 (1). pp. 129-143. ISSN 2462-1943

H

Hamdan, Mohamad Alif Hakimi and Madon, Rais Hanizam and Mohammad Dzulkifli, Farzana Balqis and Hairom, Nur Hanis Hayati and Muhamad, Aida and Abdullah, Iqbal Shahridzuan and Maulad Sapuan, Azri Amnani (2024) Review of pilot plant scale approach on polluted river water treatment technology. In: AIP Conference Proceedings.

K

Kamaruddin, Ridzwan and Sulaiman, Syabillah and Khalid, Amir and Mohammad Arafat, Mohammad Arafat and Jaat, Norrizam and Zainal Abidin, Shaiful Fadzil and Mohamed, Norirda and Yasak, Mohd Fuad (2024) Computational Fluid Dynamics: Flow Analysis on the Effect of Different Jet Orifice Angle Multi Circular Jet for Fuel and Air Mixing. CFD Letters, 16 (1). pp. 121-137. ISSN 2180-1363

Kamarudzaman, Mazlina and Abdol Rahman, Mohd Nasrull and Mohd Zaki, Nurul Elyna Asyiqen (2024) Risk assessment of pushing and pulling (RAPP) among mechanics at tyre service center. In: INTELLIGENT MANUFACTURING AND MECHATRONICS. SYMPOSIMM 2023..

Khalafe, Wazir Hassan and Sheng, Ewe Lay and Isa, Mohd Rashdan and Shamsudin, Shazarel (2024) Enhancing Mechanical Characteristics of 6061-T6 with 5083-H111 Aluminum Alloy Dissimilar Weldments: A New Pin Tool Design for Friction Stir Welding (FSW). Metal, 14 (534). pp. 1-22.

Kit, Fong Mun and Ng Yang Zu, Nicolas and Abdul Haq, Reazul Haq and Manshoor, Bukhari and Abdul Ghafir, Mohammad Fahmi and Marwah, Omar Mohd Faizan and Hoffmann, Jörg (2024) Performance Evaluation of Electrode Fabricated by using FDM in DieSinking EDM. Journal of Advanced Research in Applied Sciences and Engineering Technology, 35 (1). pp. 129-142. ISSN 2462-1943

M

M. Letchumanan, Shaktivell and Tajul Arifin, Ahmad Mubarak and Nor Salim, Nor Adrian and Taib, Ishkrizat (2024) A Comparative Analysis on the Optimization of Carbon Fibre Reinforced Polymer and Glass Fiber Reinforced Polymers as Wrapping Structures on Defected Piping System using Computational Simulation Approach. Journal of Advanced Research in Applied Mechanics, 118 (1). pp. 79-89. ISSN 2289-7895

Main, Nor Mazlana and Hishamuddin, Nurfarhani and Marsi, Noraini and Esa, Mohd Faizal and Masrol, Shaiful Rizal (2024) The performances of cationic starch (CS) and sodium carboxymethyl celluloses (CMC-Na) as a dry strength additives (DSA) on A4 wastepaper. In: AIP Conference Proceedings.

Main, Nor Mazlana and Hishamuddin, Nurfarhani and Marsi, Noraini and Eza, Mohd Faizal and Masrol, Shaiful Rizal (2024) The performances of cationic starch (CS) and sodium carboxymethyl celluloses (CMC-Na) as a dry strength additives (DSA) on A4 wastepaper. In: AIP Conference Proceedings.

Mat Zin, Muhammad Al,Ain and Ishak, Izuan Amin and Mohammad Arafat, Mohammad Arafat and Samiran, Nor Afzanizam and Sahari, Norain (2024) Impact Tip Speed Ratio in Performance Analysis for Horizontal Axis Wind Turbine (HAWT) with Optimal Twist and Tapered (OPT) Blade Shape. CFD Letters, 16 (8). pp. 1-15. ISSN 2180-1363

Maulana, Yudi and Manshoor, Bukhari and Khalid, Amir and Zaman, Izzuddin and Didane, Djamal Hissein and Abdul Haq, Reazul Haq and Kamarudin, Kamarul-Azhar and Nurmutia, Syahreen and Saleman, Abdul Rafeq and Rathje, Rio Marco and Rothe, Christin and Ibrahim, Mohd Nizam (2024) Analysis of Sound Propagation Behaviors for Supersonic Jet on Far Field Region by Computational Aero-Acoustics (CAA) Simulation. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 117 (1). pp. 71-82. ISSN 2289-7879

Mohd Khaireez, Muhamad Haikal and Yusuf, Nur Kamilah and Atef M Ghaleb, Atef M Ghaleb and Sami Al-Alimi, Sami Al-Alimi and Aiman Rahmat, Aiman Rahmat and Ikhwan Shah Tisadi Tukiat, Ikhwan Shah Tisadi Tukiat and Saif, Yazid and Adham E Ragab, Adham E Ragab and Wenbin Zhou, Wenbin Zhou and Wadea Ameen, Wadea Ameen (2024) Life cycle assessment of direct recycling hot press forging of aluminium AA7075 metal matrix composite. Material Research Express, 11. pp. 1-16.

Mohd Khaireez, Muhamad Haikal and Yusuf, Nur Kamilah and Atef M Ghaleb, Atef M Ghaleb and Sami Al-Alimi, Sami Al-Alimi and Rahmat, Aiman and Tisadi Tukiat, Ikhwan Shah and Saif, Yazid and Adham E Ragab, Adham E Ragab and Wenbin Zhou, Wenbin Zhou and Ameen, Wadea (2024) Life cycle assessment of direct recycling hot press forging of aluminium AA7075 metal matrix composite. Material Research Express, 11. pp. 1-16.

Mohd Khaireez, Muhamad Haikal and Yusuf, Nur Kamilah and M Ghaleb, Atef and Al-Alimi, Sami and Rahmat, Aiman and Tisadi Tukiat, Ikhwan Shah and Saif, Yazid and E Ragab, Adham and Zhou, Wenbin and Ameen, Wadea (2024) Life cycle assessment of direct recycling hot press forging of aluminium AA7075 metal matrix composite. Materials Research Express, 11. pp. 1-16.

Mondal, Mithun and Kamarudin, Kamarul-Azhar and Harir, Azian and MuhammHassan, Muhammad Ridhuan and Zainulabidin, Muhd Hafeez (2024) Prototype Development of Modified Roof Turbine Ventilator for Thermal Comfort Enhancement. Journal of Advanced Research in Applied Mechanics, 115 (1). pp. 152-165. ISSN 2289-7895

Mondal, Mithun and Kamarudin, Kamarul-Azhar and Hariri, Azian and Hassan, Muhammad Ridhuan and Zainulabidin, Muhd Hafeez (2024) Prototype Development of Modified Roof Turbine Ventilator for Thermal Comfort Enhancement. Journal of Advanced Research in Applied Mechanics, 115 (1). pp. 152-165. ISSN 2289-7895

Muslem, Muhammad Firdaus and Ahmad, Sufizar and Isamudin, Ikhwan and Abd Rahman, Hamimah and Mahzan, Shahruddin and Azmi, Mohd Azham and Ismail, Azzura and Sufi, Syahmie (2024) Fabrication of water filter using silica powder from rice husk waste product under compaction method. In: AIP Conference Proceedings.

Mustaffa, Norrizal and Fawzi, Mas and Amir Khalid, Amir Khalid and Norrizam Jaat, Norrizam Jaat and Tukiman, Mohd Mustaqim and Khairu Kamarudin, Khairu Kamarudin and Masrol, Shaiful Rizal and Esa, Mohd Faizal (2024) Liquid LPG injection behavior in a spark ignition engine at idle state condition. In: AIP Conference Proceedings.

N

Narendraan Rao Subba Rao, Narendraan Rao Subba Rao and Ahmad Mubarak Tajul Arifin, Ahmad Mubarak Tajul Arifin and Mohammad, Mazian and Taib, Ishkrizat and Shaktivell M. Letchumanan, Shaktivell M. Letchumanan (2024) Preliminary Study on Optimization Carbon Fibre Reinforced Polymer as Wrapping Structure at 90-degree Elbows Piping System via Finite Element Analysis. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 115 (1). pp. 69-82. ISSN 2289-7879

Nik Ab Rashid, Nik Muhammad Hafiz and Hairuddin, Abdul Aziz and Md Rezali, Khairil Anas and Masuri, Siti Ujila and Abdulabbas Mossa, Al Anbagi Muntasser and Jaafar, Jamiluddin and Fitriyana, Deni Fajar (2024) Computational Fluid Dynamics (CFD) Validation and Investigation the Effect of Piston Bowl Geometries Performance on Port Fuel InjectionHomogeneous Charge Compression Ignition (PFI-HCCI) Engines. Journal of Advanced Research in Numerical Heat Transfer, 18 (1). pp. 30-48. ISSN 2735-0142

Nor Mazlana Main, Nor Mazlana Main and Hishamuddin, Nurfarhani and Noraini Marsi, Noraini Marsi and Esa, Mohd Faizal and Masrol, Shaiful Rizal (2024) The performances of cationic starch (CS) and sodium carboxymethyl celluloses (CMC-Na) as a dry strength additives (DSA) on A4 wastepaper. In: AIP Conference Proceedings.

Nul Hakim, Lukman and Anugraha, Rino Andias and Sjafrizal, Teddy and Nopendri, Nopendri and Suryadhinia, Pratya Poeri and Ibrahim, Mohd Rasidi (2024) Effect Of Ultrasonically Vibrated Cutting Tool on Surface Roughness of Micro Turning. Journal of Advanced Research in Micro and Nano Engineering, 20 (1). pp. 35-43. ISSN 2756-8210

Nursal, Ridwan Saputra and Jaat, Norrizam and Khalid, Amir and Ishak, Izuan Amin and Zainal Abidin, Shaiful Fadzil and Manshoor, Bukhari and Samion, Syahrullail (2024) Influences of ambient temperature, injection pressure and spray characteristics on ignition delay and combustion process of palm oil and waste cooking oil. In: AIP Conference Proceedings.

O

O.M, Al-Moayed and Ismail, Al Emran and Ali K, Kareem (2024) Interaction of External Surface Cracks on Thick Cylinders under Mode III Moment and Combined with Mode I Loading. International Journal of Engineering Trends and Technology, 72 (5). pp. 51-57. ISSN 2231–5381

Ong, Pauline and Jian, Jinbao and Li, Xiuhua and Yin, Jianghua and Ma, Guodong (2024) Visible and near-infrared spectroscopic determination of sugarcane chlorophyll content using a modified wavelength selection method for multivariate calibration. Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy, 305. pp. 1-15.

P

Pairan, Mohammad Fahmi and Shamsudin, Syariful Syafiq (2024) Autotuning PID Controllers for Quadplane Hybrid UAV using Differential Evolution Algorithm. Journal of Aeronautics, Astronautics and Aviation, 56 (15). pp. 341-356.

Pairan, Mohammad Fahmi and Shamsudin, Syariful Syafiq and Yaakub, Mohd Fauzi (2024) Autotuning PID Controllers for Quadplane Hybrid UAV using Differential Evolution Algorithm. Journal of Aeronautics, Astronautics and Aviation, 56 (1). pp. 341-356.

Pillai, Ragu Chanthira and Tajul Arifin, Ahmad Mubarak and Nor Salim, Nor Adrian and Rahman, Mohd Nasrull and Taib, Ishkrizat Osman and Osman, Shahrul Azmir and M. Letchumanan, Shaktivell (2024) A Review on Evaluating the Optimization of Fibre Reinforced Polymer for Compound/Repair Clamp on Leaked Piping System using Computational Simulation. Journal of Advanced Research in Applied Mechanics, 118 (1). pp. 67-78. ISSN 2289-7895

Purna Irawan, Agustinus and -, Deni Fajar Fitriyana and Siregar, Januar Parlaungan and Cionita, Tezara and Anggarina, Paula Tjatoerwidya and Jaafar, Jamiluddin and Taqriban, Rilo Berdin and Jehadus, Emilianus and Manalu, Janviter (2024) Influence of Post-Heat Treatment on the Characteristics of FeCrBMnSi Coating on Stainless Steel 304 Substrate Prepared by Twin Wire Arc Spray (TWAS) Method at Various Stand-off Distance. Jordan Journal of Mechanical and Industrial Engineering, 18 (2). pp. 327-337. ISSN 1995-6665

R

Rajendran, R. and Ham, W. J. and Low, C. Y. and Alexander, C. H. C. and Koh, C. T. (2024) Control of microstructure architecture of polycaprolactone electrospun scaffolds. In: PROCEEDINGS OF 5TH INTERNATIONAL CONFERENCE ON SUSTAINABLE INNOVATION IN ENGINEERING AND TECHNOLOGY 2023.

Rajendran, R. and Ham, W. J. and Low, C. Y. and Alexander, C. H. C. and Koh, C. T. (2024) Control of microstructure architectureof polycaprolactone electrospunscaffolds. In: AIP Conference Proceedings.

Roslan, Mohammad Fikrey and Abd Rahman, Hamimah and Azmi, Mohd Azham and MohdTukimon, Mohd Faizal and Jaidi, Zolhafizi and Abdul Ghani, Muhammad Zul Idzham (2024) Influence Of Different Ratios Of Gdc-Sdc On Ssc/Gdc–Sdc Dual Composite Cathode For Intermediate-Temperature Solid Oxide Fuel Cells. Malaysian Journal of Microscopy, 20 (1). pp. 63-73. ISSN 1823-7010

S

S., A. Rafeq and Daud, N. M. and Sudin, M. N. and M. S. ZAKARIA, M. S. ZAKARIA and Rosli, M. A. M. and Munir, M. F. and Manshoor, B. (2024) Adsorption mechanisms of linear and branched alkane liquid on solid surfaces that influences heat transfer. In: 15th INTERNATIONAL CONFERENCE ON THERMAL ENGINEERING: THEORY AND APPLICATIONS, ICTEA 2024.

Sabri, Ainaa Mardhiah and Talib, Norfazillah and Abdul Karim, Zulkhairul and Abdul Sani, Amiril Sahab and Kamdani, Kamaruddin and Kunar, Sandip and Sani, Nooriskandar (2024) Physical Characterization of Modified Palm Oil with Hybrid Additives Nanofluids. Journal of Advanced Research in Micro and Nano Engineering, 15 (1). pp. 41-51. ISSN 2756-8210

Samian, Ain Zubaidah and Saleh, Aslinda and Nazri, Nazreen James and Talib, Norfazillah and Abdullah, Haslina and Lee, Woon Kiow (2024) The Impact of Heating Temperature and Flux Ratio on the In-Situ Casting Technique as a Direct Recycling of AlSi7Mg Machining Chips. Journal of Advanced Research in Micro and Nano Engineering, 15 (1). pp. 31-40. ISSN 2756-8210

Subba Rao, Narendraan Rao and Tajul Arifin, Ahmad Mubarak and Mohammad, Mazian and Taib, Ishkrizat and M. Letchumanan, Shaktivell (2024) Preliminary Study on Optimization Carbon Fibre Reinforced Polymer as Wrapping Structure at 90-degree Elbows Piping System via Finite Element Analysis. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 115 (1). pp. 69-82. ISSN 2289-7879

Subramaniam, Kamalleswaran and Wan Salim, Wan Saiful-Islam (2024) Simulation of the Performance of an Electrically Turbocharged Engine Over an Urban Driving Cycle. INTERNATIONAL JOURNAL OF AUTOMOTIVE AND MECHANICAL ENGINEERING, 21 (1). 11139 -11154. ISSN 2229-8649

Sufi Abdul Shukor, Muhammad Syahmie and Ahmad, Sufizar and Muslem, Muhammad Firdaus and Mat Noor, Fazimah and Abd. Rahman, Hamimah and Mahzan, Shahruddin and Jaidi, Zolhafizi (2024) Fabrication Of Silica Water Filter From Rice Husk Waste Product Via Slip Casting Method. Muhammad Syahmie Sufi Abdul Shukor et al. Malaysian Journal of Microscopy, 20 (1). pp. 74-84. ISSN 1823-7010

T

Tezara Cionita, Tezara Cionita and Mohamad Hamdan, Mohammad Hazim and Januar Parlaungan Siregar, Januar Parlaungan Siregar and Deni Fajar Fitriyana, Deni Fajar Fitriyana and Junid, Ramli and Wong Ling Shing, Wong Ling Shing and Jaafar, Jamiluddin and Agustinus Purna Irawan, Agustinus Purna Irawan and Teuku Rihayat, Teuku Rihayat and Rifky Ismail, Rifky Ismail and Athanasius Priharyoto Bayuseno, Athanasius Priharyoto Bayuseno and Emilianus Jehadus, Emilianus Jehadus (2024) Overview of Jute Fibre as Thermoplastic Matrix Polymer Reinforcement. Journal of Renewable Materials. pp. 1-27.

W

Wan Ab Halim, Wan Zateel Aqmaer and Junid, Ramli Junid and Sazali, Norazliane and Siregar, Januar Parlaungan and Abd Razak, Jeeferie and Fitriyana, Deni Fajar and Cionita, Tezara and Jaafar, Jamiluddin (2024) Enhancement of fexural modulus and strength of epoxy nanocomposites with the inclusion of functionalized GNPs using Tween 80. Journal of Engineering and Applied Science, 71 (69). pp. 1-14.

Welly Sugianto, Welly Sugianto and Abdul Haq, Reazul Haq and Abdol Rahman, Mohd Nasrull (2024) Automobile Workshop Queue System Optimization Using Response Surface. International Journal of Industrial Engineering & Production Research, 35 (1). pp. 1-30.

This list was generated on Sun Mar 30 22:00:46 2025 +08.

Export as	Atom RSS 1.0 RSS 2.0