Items where Division is "Faculty of Engineering Technology > FTK" and Year is 2024

A

Ab Latif, Najibah and Othman, Nurnida Elmira and Salmiah Kasolang, Salmiah Kasolang and Mat Hassan, Nik Normunira (2024) Effect of Surface Roughness of Pistia Leaves Inspired Surfaces on Oil Contact Angle and Coefficient of Friction under Lubricated Condition. Journal of Advanced Research in Applied Sciences and Engineering Technology, 35 (2). pp. 84-93. ISSN 2462-1943

Abdul Karim, Nurul Nafisah and Mahmood, Salwa and El Bakri, Helmy Mustafa and Abdul Rahman, Ismail and Badulrudin, Mohd Fahmi and Sazali, Norazlianie (2024) Development of a Survey Instrument for Measuring Firefighter Ergonomic Factors in Hose Rolling Activity: A Pilot Study. Journal of Advanced Research in Applied Mechanics, 114 (1). pp. 125-135. ISSN 2289-7895

Abdul Rahman, Aliff and Ahmad, Aznizam (2024) A comparative study of NAK80 steel and beryllium copper moulds for injection moulding of polypropylene material. In: PROGRESS IN ENGINEERING APPLICATION AND TECHNOLOGY.

Abdul Samad, Fadhilah Diyana and Awang, Mariah and Syazwan, M M Syafiq and A Rahman, M A and Musa, Mohd Kamaruzaman and Hamidon, Nuramidah and Rosli, Mohd Arif and Daud, Siti Zaleha and Ahmad, Faridahanim and Mohd Akhir, Mohd Shahrizan (2024) A study on issues of photovoltaic modules in solar energy system on safety, health and environmental aspect. In: AIP Conference Proceedings.

Abidin, Zainal and Prasetijo, Joewono and Mohd Masirin, Mohd Idrus (2024) Land ase analysis for Surabaya metropolitan area urban transportation planning using spatial method. In: AIP Conference Proceedings.

Adnan, Suraya Hani and Abdul Wahab, Norhayati and Turiman, Ezatul Syazwana and Osman, Mohamad Hairi and Wan Jusoh, Wan Amizah and Mohd Yassin, Nurain Izzati and Mia Soejoso, Mia Soejoso and Wahee Anuar, Mohamad Nor Akasyah (2024) Mechanical Properties of Bricks Containing Sago Fine Waste as Cement Replacement Material. Journal of Advanced Research in Applied Mechanics, 115 (1). pp. 36-46. ISSN 2289-7895

Agustinus Purna Irawan, Agustinus Purna Irawan and Januar Parlaungan Siregar, Januar Parlaungan Siregar and Tezara Cionita, Tezara Cionita and Deni Fajar Fitriyana, Deni Fajar Fitriyana and Ahmad Alias, Ahmad Alias and Rusiyanto Rusiyanto, Rusiyanto Rusiyanto and Jamiluddin Jaafar, Jamiluddin Jaafar and Pungkas Prayitno, Pungkas Prayitno and Rifky Ismail, Rifky Ismail and Athanasius Priharyoto Bayuseno, Athanasius Priharyoto Bayuseno and Ayub Ahmed Janvekar, Ayub Ahmed Janvekar (2024) Elaeocarpus ganitrus (rudraksha) seeds as a potential sustainable reinforcement for polymer matrix composites. Polymer Composites. pp. 1-14.

Ahmer Ali Siyal, Ahmer Ali Siyal and Radin Mohamed,, Radin Maya Saphira and Shamsuddin, Rashid and Ridzuan, Mohd Baharudin (2024) A comprehensive review of synthesis kinetics and formation mechanism of geopolymers. RSC Advances, 14. pp. 446-462.

Awang, Zarizi and Hairom, Nur Hanis Hayati and Md Noor, Nor Amirah Syamimi and Zakaria, Eilly Nurfazlin and Johari, Mohammad Ruzaini and Abdul Hamid, Nor Hazren and Abu Bakar Sidik, Dilaeleyana and Mohd Nadzim, Ummi Kalsum Hasanah (2024) Reusability of ZnO-clay photocatalyst for POMSE treatment via membrane photocatalytic reactor. In: AIP Conference Proceedings.

Azim, Afi and Abu Hassan, Omar and Zambri, Nor Aira and Zulkifli, Shamsul Aizam (2024) Fault detection system and smart power utilization using iot monitoring for photovoltaic system. In: PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON GREEN ENGINEERING & TECHNOLOGY 2022 (ICONGETECH 2022).

B

Biajawi, Mohammad I. Al and Embong, Rahimah and Kusbiantoro, Andri and Abd Aljabbar, Haneen (2024) Influences of various particle sizes of coal bottom ash as supplementary cementitious material on the pozzolanic properties. In: SPRINGER PROCEEDINGS IN MATERIALS.

D

Daud, Mohamad Khairul Aiman and Mohd Nordin, Najaa Aimi and Tuan Ismail, Tuan Noor Hasanah and Adam, Effendy and Zulkarnain, Noraishikin and Muhammad Razif, Muhammad Rusydi and Rehman, Tariq (2024) Development of Smart Chopper Composting Monitoring System. Journal of Advanced Research in Applied Sciences and Engineering Technology, 42 (2). pp. 197-208. ISSN 2462-1943

F

Feihu, Zeng and Sy Yi, Sim (2024) Electrochemical Synthesis of Ferrate (VI): Factors Influencing Synthesis and Current Research Trends. Journal of Advanced Research in Applied Mechanics, 117 (1). pp. 72-90. ISSN 2289-7895

H

H. Mohd Hanafi, H. Mohd Hanafi and Muthusamy, Khairunisa and Saffuan, W.A. and Budiea, A.M.A. and Kusbiantoro, A. and Nabilla, M. and Rafiza, A.R. and Błoch, K. (2024) Mechanical Properties of Lightweight Aggregate Concrete Containing Unground Palm Oil Fuel Ash as Partial Sand Replacement. Archives of Metallurgy and Materials, 69 (1). pp. 297-301.

Hartatik, Nurani and Prasetijo, Joewono and Dwi Prasetyo, Yudi and Theresia, Theresia and Khilda Nistrina, Khilda Nistrina and Atqiya Muslihati, Atqiya Muslihati (2024) R software for traffic crash. In: AIP Conference Proceedings.

Hasbullah, Hasbullah and Bareduan, Salleh Ahmad (2024) Identifying weaknesses and strengths of existing I4.0 Readiness Indices to enhance INDI 4.0. SINERGI, 28 (1). pp. 129-140.

Hasbullah Hasbullah, Hasbullah Hasbullah and Salleh Ahmad Bareduan, Salleh Ahmad Bareduan (2024) Identifying weaknesses and strengths of existing I4.0 Readiness Indices to enhance INDI 4.0. SINERGI, 28 (1). pp. 129-140.

I

Ismail, A.H. and Kusbiantoro, A. and Muthusamy, K. and Mortar, N.A.M. (2024) Acceleration of Early Strength Development in Mortars Containing Soluble Silica Extracted from Palm Oil Clinker. Archives of Metallurgy and Materials, 69 (1). pp. 269-273.

Ismail, Amalina Hanani and Kusbiantoro, Andri and Tajunnisa, Yuyun and Ekaputri, Januarti Jaya and Laory, Irwanda (2024) A review of aluminosilicate sources from inorganic waste for geopolymer production: Sustainable approach for hydrocarbon waste disposal. Cleaner Materials, 13. pp. 1-22.

Isradi, Muhammad and Dwiatmoko, Hermanto and Prasetijo, Joewono and Rifai, Andri Irfan and Zainal, Zaffan Farhana and Zhang, Guohui and Firdaus, Hendy Yusman (2024) Identification of hazardous road sites: a comparison of blackspot methodology of Narogong Road Bekasi and Johor Federal Roads. Sinergi, 28 (2). pp. 347-354.

Isradi, Muhammad and Prasetijo, Joewono and Rifai, Andri Irfan and Andraiko, Heru and Zhang, Guohui (2024) The Prediction of Road Condition Value during Maintenance Based on Markov Process. International Journal On Advanced Science Engeneering Information Technology, 14 (3). pp. 1083-1090. ISSN 2088-5334

J

Jamal, I. I and Marsi, N and Letchumanan, T and Mohd Rus, A. Z and Hashim, M. M (2024) Characteristics of Mechanical Strength of Hybrid Reinforced Plastic Waste Mixed with Wood Waste. International Journal of Automotive and Mechanical Engineering, 21 (2). 11276 -11286. ISSN 2229-8649

Jamal, Iylia Izzati and Marsi, Noraini and Mohd Rus, Anika Zafiah and Saiful Bahri, Aiman Hisyam and Md-Said, Asmadi and Hashim, Mohamad Mohshein and Ariffin, Izzah Aqilah (2024) Mechanical Characteristics Rice Husk Fiber (RHF) Blended Recycled Polyethylene (RPE) for RHF/RPE Polymer Composite. Journal of Advanced Research in Applied Mechanics, 118 (1). pp. 144-156. ISSN 2289-7895

K

KHAIRUDIN, Hafizudin Fikri and AHMAD, Suziana and Mohd TUMARI, Mohd Zaidi and SADUN, Amirul Syafiq and MUSTAFFA, Izadora (2024) IoT-based Water Surface Cleaning Robot with Live Streaming. PRZEGLĄD ELEKTROTECHNICZNY. pp. 172-176. ISSN 0033-2097

Kadir, Muhammad Alfi and Razalia, Nizamuddin and Abdul Jalil, Muhammad Zuhairi and Abdul Rahman, Khairul Anuar and Nur Yunus, Faizal Amin (2024) Energy recovery model through condenser unit of split type air conditioner. In: AIP Conference Proceedings.

L

L.A. Sofri, L.A. Sofri and D. Ganesan, D. Ganesan and M.M. Al B. Abdullah, M.M. Al B. Abdullah and Chee-Ming Chan, Chee-Ming Chan and M.H. Osman, M.H. Osman and J. Garus, J. Garus and S. Garus, S. Garus (2024) The Effect of Recycled High-Density Polyethylene (HDPE) as an Additional Binder in Porous Asphalt Pavement. -, 69 (1). pp. 289-295.

M

MUHAMMAD DZULKARNAIN SHAHIDAN, MUHAMMAD DZULKARNAIN SHAHIDAN and ABD FATHUL HAKIM ZULKIFLI, ABD FATHUL HAKIM ZULKIFLI and VALLIAPPAN RAMAN, VALLIAPPAN RAMAN and WEIDONG HUANG, WEIDONG HUANG and AMIZI NOOR, AMIZI NOOR (2024) A RETROFITTED DIGITAL VISUAL MANAGEMENT SYSTEM (DVMS) TO MANAGE AND CONTROL THE PRODUCTION ACTIVITIES IN THE MANUFACTURING INDUSTRY: AN EXPLORATORY STUDY. Journal of Engineering Science and Technology, 19 (1). 18 -34.

Malik, Alia Farhana and Hamidon, Nuramidah and Adly Fitry, Nurul Izzah and Mohd Arish, Nur Aini and Awang, Mariah and Abd Rahman, Muhammad Ashraf and Murugan, Dharshilan and Abdullah, Nor Maizzaty (2024) Forecasting the future drought in Bukit Merah using HECHMS software. In: AIP Conference Proceedings.

Mohamad, Mahmod Abd Hakim and Onn, Nurfarahin and Yahya, Mohd Shahir and Abdul Halim, Muhammad Akmal and Rani, Muhammad Arif and Mohd Asri, Ikhwan Hanif and Sanik, Mohd Erwan and Mohd Shah, Nor Shahida (2024) A New Design and Simulation of Smart Sensing for Emergency Vehicle. Journal of Advanced Research in Applied Sciences and Engineering Technology, 35 (1). pp. 1-15. ISSN 2462-1943

Mohamad Sahimi, Nur Nabilah and Mustafa, Mohd Syafiq Syazwan and Muslim, Rahmat and Roslan, Nurul Hidayah and Yusop, Fatimah and Hariri, Azian and Zakaria, Anies Faziehan and Abd Latif, Muhamad Faiz and Kabrein, Hashim and Nur Yunus, Faizal Amin (2024) Thermal Comfort in a Tropical Climate: Case Study of the Cafeteria in Student Residential College, UTHM Pagoh Branch Campus. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 114 (2). pp. 165-187. ISSN 2289-7879

Mohamed Raimi, Halimatus Sa’adiah and Azlan Shahrul, Nafratiti Najiha and Tuan Ismail, Tuan Noor Hasanah and Ali, Roslinda and Shaheed, Riffat and Mohamed Yusop, Fatimah (2024) The Influence of Compost Bin Volume and Effective Microorganisms (EM) Quantity for Efficient Food Waste Composting. Journal of Advanced Research in Micro and Nano Engineering, 16 (1). pp. 70-84. ISSN 2756-8210

Mohammad Zaid, Mohamad Nadzirul Ariff and Zohari, Mohd Hakimi (2024) Mobile weather station with drones. In: PROGRESS IN ENGINEERING APPLICATION AND TECHNOLOGY.

Mohd Idris, Muhammad Khalis and Nasir, Siti Hana and Roslan, Mohd Nazrul (2024) Moisture management properties of knitted fabrics with varying structures and fibre content. In: AIP Conference Proceedings.

Mohd Norzam, Muhammad Nur Aliff and Karjanto, Juffrizal and Md. Yusof, Nidzamuddin and Hassan, Muhammad Zahir and Zulkifli, Abd Fathul Hakim and Mohd Jawi, Zulhaidi and Ab. Rashid, Ahmad Azad and Abu Kassim, Khairil Anwar (2024) Effects of ride comfort on different non-driving related activities in fully automated driving experience. In: AIP Conference Proceedings.

Muhamad, Mimi Suliza and Wan Daruddin, Wan Khairunnisa and Mohd Apandi, Najeeha and Mohamed Sunar, Norshuhaila (2024) The combination of papaya seed and orange peel as natural coagulant for greywater treatment. In: AIP Conference Proceedings.

Muhamad, Mimi Suliza and Wan Daruddin, Wan Khairunnisa and Mohd Apandi, Najeeha and Mohamed Sunar, Norshuhaila (2024) The combination of papaya seed and orange peel as natural coagulant for greywater treatment. In: AIP Conference Proceedings.

Muhammad Razif, Muhammad Rusydi and Jaafar, Nur Jannah and Mohd Mustapha, Nurul Hasyimah and Yong Tze Mi, Yong Tze Mi and Mohd Shah, Nor Shahida and Hashim, Muhamad Mohshein and Mustaffa, Khairul Nizam (2024) A wireless monitoring system for measuring flexible tank strain using fabric-based stretchable conductive sensor. In: 2024 9TH INTERNATIONAL CONFERENCE ON MECHATRONICS ENGINEERING (ICOM).

Murugan, Dharshilan and Hamidon, Nuramidah and Abdul Manap, Nur Suhana and Mohd Arish, Nur Aini and Abdullah, Nor Maizzaty and Awang, Mariah and Malik, Alia Farhana and Abdul Hamid, Nor Hazren and Harun, Hasnida and Mohamed Sunar, Norshuhaila and Muhamad, Mimi Suliza and Ali, Roslinda (2024) Future temperature for drought prediction in Bukit Merah, Perak by using SDSM modelling. In: AIP Conference Proceedings.

N

Nik Abdul Khalid, Nik Muhammad Imam and Bakar, Lilywati (2024) loT based solar automatic clothes hanger system. In: PROGRESS IN ENGINEERING APPLICATION AND TECHNOLOGY.

Nurani Hartatik, Nurani Hartatik and Prasetijo, Joewono and Dwi Prasetyo, Yudi and Muhammad Isradi, Muhammad Isradi and Khilda Nistrina, Khilda Nistrina and Atqiya Muslihati, Atqiya Muslihati (2024) Correlation analysis on crash factor in Surabaya-Manyar toll road. In: AIP Conference Proceedings.

P

Peniel, Ang Soon Ern and Ali, Nur Aida and Tsai, Kai Len and Kasim, Narimah and Ali, Roslinda (2024) Challenges and drivers of BIM implementation in Sarawak Construction Industry. In: AIP Conference Proceedings.

R

Rajendran, S and Ishak, I. A and Arafat, M and Mohammad, A. F and Salleh, Z. M and Samiran, N. A and Ja’a, M. N. M and Sulaiman, S (2024) Aerodynamic Effects of High-Speed Train Positions During Tunnel Exit Under Crosswind Conditions Using Computational Fluid Dynamics. International Journal Of Automotive And Mechanical Engineering, 21 (2). pp. 11191-11202. ISSN 2229-8649

Razali, Muhammad Faiz and Amri, Muhammad Akmal and Mohamed, Elizah and Othman, Zolkanain and Mohd Fauzi, Noor Akhmazillah (2024) Investigating the effect of thermal treatment on nutritional properties of Kelulut Honey. In: AIP Conference Proceedings.

Rifai, Andri Irfan and Novia Siti Rohana, Novia Siti Rohana and Isradi, Muhammad and Prasetijo, Joewono (2024) Analysis of the optimization of port time for improve interislands port performance during pandemic COVID-19. In: AIP Conference Proceedings.

Roseli, Adyla Illyana and Mat Hassan, Nik Normunira and Leman, Abdul Mutalib and Abdul Latif, Najibah and Aminanda, Yulfian and Setyanto, Djoko and Tajunnisa, Yuyun and Areerob, Yonrapach and Nukunudompanich, Methawee and Azmi, Muhammad Farid (2024) Morphological, TGA, and FTIR on Rigid Polyurethane Composite Laminated with Untreated and Treated Bamboo Fiber Roof Insulation. Journal of Advanced Research in Applied Mechanics, 117 (1). pp. 91-106. ISSN 2289-7895

Roseli, Adyla Illyana and Mat Hassan, Nik Normunira and Yahya, Nur Faezah and Atil, Aida Atiqah and Darlis, Nofrizalidris and Roslan, Mohd Nazrul and Tuan Ismail, Tuan Noor Hasanah and Mohamed Yusop, Fatimah and Johan, Nur Ain Arina (2024) Effect weight ratio of bamboo schizostachyum grande fiber treated by silane coupling agent. In: AIP Conference Proceedings.

Roseli, Adyla Illyana and Mat Hassana, Nik Normunira and Yahya, Nur Faezah and Atil, Aida Atiqah and Darlis, Nofrizalidris and Roslan, Mohd Nazrul and Tuan Ismail, Tuan Noor Hasanah (2024) Physical characterization of bamboo schizostachyum grande fiber treated by silane coupling agent for hydrophobic applications. In: AIP Conference Proceedings.

S

SM Johan, Siti Farhanah and Ming, Chan Chee and Cheong, Tan Poi and Rosman, Muhammad Zawawi (2024) Consolidation of a High Plasticity Dredged Marine Clay Incorporating Single Drainage Path with Granular Geowastes. Journal of Advanced Research in Applied Mechanics, 119 (1). pp. 83-91. ISSN 2289-7895

Saif, Abdu and Mohd Shah, Nor Shahida and Alnoamani, Aiman and Ameen, Ali and Curry, Edward and Al Khattat, Vailet Hikmat Faraj and Alsamhi, Saeed Hamood (2024) Resilient skies: advancing climate-resilient UAVs for energy-efficient B5G communication in challenging environments. In: 2024 4TH INTERNATIONAL CONFERENCE ON EMERGING SMART TECHNOLOGIES AND APPLICATIONS (ESMARTA).

Seliyan, Kyiirthana and Muslim, Rahmat and Rosli, Mohd Arif (2024) An assessment of potable water quality at Kolej Kediaman Kampus Pagoh, Universiti Tun Hussein Onn Malaysia. In: PROGRESS IN ENGINEERING APPLICATION AND TECHNOLOGY.

Soon Ern, Peniel Ang and Nordin, Norimran and Saparudin, Faiz Asraf and Kai Len, Tsai and Kasim, Narimah and Osman, Mohamad Hairi (2024) Interface Management for Telecommunication System During Design Stage: A Case Study of LRT3 Project. Proceedings of the International Conference on Green Engineering & Technology. pp. 1-10.

T

Thong, Eric Tze Xin and Zulklif, Abd Fathul Hakim and Karjanto, Juffrizal and Md Yusof, Nidzamuddin and Mohd Jawi, Zulhaidi and Abu Kassim, Khairil Anwar (2024) Observational study on communication in mixed traffic scenarios: Autonomous vehicle versus pedestrian. In: AIP Conference Proceedings.

W

Wanga, Wani and Mohd Sihat, Mohd Zul Haffizi and Hehsan, Haffidzudin (2024) A comparative analysis of aluminium and mild steel on CNC milling using CAD/CAM Programming. In: PROGRESS IN ENGINEERING APPLICATION AND TECHNOLOGY.

Wenjie Wu, Wenjie Wu and Chee-Ming Chan, Chee-Ming Chan and Yilei Gu, Yilei Gu and Xiaopeng Su, Xiaopeng Su (2024) Study on Acoustic Emission Characteristics and Damage Evolution Law of Shale under Uniaxial Compression. Advances in Civil Engineering. pp. 1-10.

Wu, Wenjie and Chan, Chee-Ming and Gu, Yilei and Su, Xiaopeng (2024) Study on Acoustic Emission Characteristics and Damage Evolution Law of Shale under Uniaxial Compression. Advances in Civil Engineering. pp. 1-10.

Y

Yusman, Nuriman Nabila and Adnan, Suraya Hani (2024) The compressive strength & water absorption of chicken egg shell concrete. In: PROGRESS IN ENGINEERING APPLICATION AND TECHNOLOGY.

Z

Zulkifli, Abd Fathul Hakim and Mohd Ali, Mas Fawzi and Anwar Syahmi Adlin Zafrulan, Anwar Syahmi Adlin Zafrulan and Osman, Shahrul Azmir and Abd Jalal, MZahar and Harrison Lau, Harrison Lau (2024) Performance and Emissions Characteristics of Vehicle Fuelled with Blended Palm Biodiesel Before and After Engine Overhaul. Journal of Advanced Research in Applied Sciences and Engineering Technology, 114 (2). pp. 188-195. ISSN 2289-7879