Items where Division is "Faculty of Mechanical and Manufacturing Engineering > Department of Mechanical Engineering" and Year is 2013

A

Ab Latif, Mohd Noor Hisyam (2013) Production management and improvement initiatives: case studies of two Malaysian manufacturing companies. Masters thesis, Universiti Tun Hussein Malaysia.

Abd Rahim, Rahimah (2013) Effect of physical and mechanical properties of PU biopolymer membranes upon use of different fabrication techniques. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Hamid, Faizul Ezmat (2013) Investigation on different composition of powder metallurgy electrode (Cu-W) in high performance edm (HPEDM) on AISI D2 hardened steel. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Jamil, Muhamad Faizal (2013) Design optimization of ANN-based pattern recognizer for multivariate quality control. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Alfan, Norman Hafizi (2013) Analysis of characteristic heat pipe as an efficient cooling heat transfer device. Masters thesis, Universiti Tun Hussein Malaysia.

Araby, Sherif and Zaman, Izzuddin and Meng, Qingshi and Kawashima, Nobuyuki and Michelmore, Andrew and Kuan, Hsu-Chiang and Majewski, Peter and Ma, Jun and Zhang, Liqun (2013) Melt compounding with graphene to develop functional, high-performance elastomers. Nanotechnology, 24 (165601). pp. 1-14. ISSN 0957-4484

Arhami, Arhami (2013) Design and analysis of an unmanned small-scale air-land-water vehicle. Doctoral thesis, Universiti Tun Hussein Malaysia.

H

Haris, Nur Ismalina (2013) Failure analysis of conveyor chain links: a case study at Top Glove Sdn. Bhd. Masters thesis, Universiti Tun Hussein Malaysia.

Hehsan, Haffidzudin (2013) The effect of vortex well thickness on microstructure and mechanical properties of aluminium LM6. Masters thesis, Universiti Tun Hussein Malaysia.

I

Iberahim, Suzilawati (2013) Design and development of pyrolysis system to produce wood vinegar. Masters thesis, Universiti Tun Hussein Malaysia.

Ismon, Maznan (2013) Condition monitoring of variable speed worm gearbox lubricated with contaminated gear oil. Masters thesis, Universiti Tun Hussein Malaysia.

J

Jasni, Nur Akmal Hakim (2013) Cutting performance of advanced multilayer coated (TiAlN/AlCrN) in machining of AISI D2 hardened steel. Masters thesis, Universiti Tun Hussein Malaysia.

K

Khaire Elarosi, Muwfik Faidi (2013) On the development computer, code for determinig the root of equation for transient flight analysis. Masters thesis, Universiti Tun Hussein Malaysia.

Khalid, Siti Nor Azila (2013) Mechanical strength of as-compacted aluminium alloy waste chips. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Kidoguchi, Yoshiyuki and Nada, Yuzuru and Yano, Takayuki and Nakagiri, Misato (2013) Analysis of a high pressure diesel spray at high pressure and temperature environment conditions. Transactions of The Japan Society of Mechanical Engineers Series B, 79 (799). pp. 172-178. ISSN 0387-5016

M

Ma, Jun and Meng, Qingshi and Michelmore, Andrew and Kawashima, Nobuyuki and Izzuddin, Zaman and Bengtsson, Carl and Kuan, Hsu-Chiang (2013) Covalently bonded interfaces for polymer/graphene composites. Journal of Materials Chemistry A: materials for energy and sustainability (Journal of Materials Chemistry A), 1. pp. 4255-4264. ISSN 2050-7488

Madlan, Mohd Amran (2013) The application on the usage of natural fibers as noise absorbers. Masters thesis, Universiti Tun Hussein Malaysia.

Masrol, Shaiful Rizal (2013) Characteristics of paper made from durian rinds. Masters thesis, Universiti Tun Hussein Malaysia.

Md Salleh, Salihatun and Rahim, E.A. and Roslan, Mohd Nazrul and Ismon, Maznan and Madlan, M.A. and Masrol, Shaiful Rizal and Jelani, Abdul Razak and Ahmad, Mohd Rizal (2013) Hand-arm vibration of unskilled oil palm motorised cutter operator. Applied Mechanics and Materials, 315 (NIL). pp. 695-699. ISSN 1662-7482

Mohd Khairy, Afiz Azry (2013) Multivariate quality control using an integrated artificial neural network scheme: a case study in plastic injection molding industry. Masters thesis, Universiti Tun Hussein Malaysia.

Mohd Nawi, Mohd Al-Hafiz (2013) Aerodynamics of a swirling fluidized bed. Masters thesis, Universiti Tun Hussein Malaysia.

Mohd Norihan, Ibrahim and Adi Siswanto, Waluyo and Zaidi, A. M. A. (2013) Computational issues in the simulation of high speed ballistic impact: a review. Applied Mechanics and Materials, 315 (NIL). pp. 762-767. ISSN 1660-9336

Mohd Turan, Faiz (2013) A three-stage methodology for design evaluation in product development. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mokhtar, Mohd Faiz (2013) Features extraction of geometry defect monitoring in cylindrical piping. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Muhamad Damanhuri, Amir Abdullah (2013) Monitoring of air ducting using mechanical robot for indoor air quality (IAQ) improvement. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mustaffa, Norrizal (2013) Effects of biodiesel fuel temperature on performance and emissions of a compression ignition (CI) engine. Masters thesis, Universiti Tun Hussein Malaysia.

Mustaffa, Norrizal (2013) Effects of biodiesel fuel temperature on performance and emissions of a compression ignition (CI) engine. Masters thesis, Universiti Tun Hussein Malaysia.

N

Nasir, N.F. and W. Daud, W.R. and Kamarudin, S.K. and Yaakob, Z. (2013) Process system engineering in biodiesel production: a review. Renewable and Sustainable Energy Reviews, 22. pp. 631-639. ISSN 1364-0321

Ng, Chee Seng (2013) A study of the effectiveness of local exhaust ventilation (LEV) in training facilities building using computational fluid dynamics (CFD) approach. Masters thesis, Universiti Tun Hussein Malaysia.

R

Roslan, Rohaizu and Wan Daud, Wan Rosli and Zainuddin, Zarita and Pauline, Ong (2013) Optimization of cellulose phosphate synthesis from oil palmlignocellulosics using wavelet neural networks. Industrial Crops and Products, 50 (NIL). pp. 611-617. ISSN 0926-6690

S

Sidek, Kamsidi @ Abd Malek (2013) Production improvement in ACM manufacturing company using lean manufacturing approach. Masters thesis, Universiti Tun Hussein Malaysia.

Sies, Mohamad Farid (2013) Development of the premixing injector in burner system. Masters thesis, Universiti Tun Hussein Malaysia.

Subramaniyan, S Kanna (2013) Mechanical behaviour and energy absorption performances of composite foam-filled circular tubes under axial loadings. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Y

Yeoh, Kim Hao (2013) Efficiency improvement of assembly line: case study of bus seat manufacturer. Masters thesis, Universiti Tun Hussein Malaysia.

Yusuf, Nur Kamilah (2013) A new approach of direct recycling of aluminium alloy chips (AA6061) in hot press forging process. Masters thesis, Universiti Tun Hussein Malaysia.

Z

Zainol Abidin, Mohamad Hafiz and Mohamad, Mahmod Abd Hakim and Ahmad Zaidi, Ahmad Mujahid and Wan Mat, Wan Ali (2013) Experimental study on ballistic resistance of sandwich panel protection structure with kenaf foam as a core material against small arm bullet. Applied Mechanics and Materials, 315. pp. 612-615. ISSN 1660-9336

Zainuddin, Zarita and Lai, Kee Huong and Pauline, Ong (2013) Reliable epileptic seizure detection using an improved wavelet neural network. Australasian Medical Journal, 6 (5). pp. 308-314. ISSN 1836-1935

Zainuddin, Zarita and Pauline, Ong (2013) Design of wavelet neural networks based on symmetry fuzzy C-means for function approximation. Neural Computing and Applications, 23 (NIL). pp. 247-259. ISSN 0941-0643

Zakaria, Hanis (2013) Effects of storage temperature and storage duration of biodiesel properties, visual appearances and emision. Masters thesis, Universiti Tun Hussein Onn Malaysia.