Items where Division is "Faculty of Mechanical and Manufacturing Engineering > Department of Manufacturing Engineering" and Year is 2020

Ab Rahman, Mazlinda and Othman, Mohd Hafiz Dzarfan and Fansuri, Hamzah and Harun, Zawati and Omar, Ahmad Faiq and Shabri, Hazrul Adzfar and Ravi, Jeganes and A Rahman, Mukhlis and Jaafar, Juhana and Ismail, Ahmad Fauzi and Osman, Nafisah (2020) Development of high-performance anode/electrolyte/cathode micro-tubular solid oxide fuel cell via phase inversion-based co-extrusion/ co-sintering technique. Journal of Power Sources, 467. pp. 1-11. ISSN 0378-7753

Abd Rahman, Muhammad Hanafi and Mohamad, Zaleha (2020) Effects of percentage fibre with treated and untreated on sound absorption properties in rubber wood fibre composite. JSE Journal of Science and Engineering, 1 (2). pp. 38-42.

Abdul Bakil, Siti Natrah and Kamal, Hazirah and Abdullah, ‪Hasan Zuhudi and Idris, ‪Maizlinda Izwana (2020) Sodium alginate-zinc oxide nanocomposite film for antibacterial wound healing applications. Biointerface Research in Applied Chemistry, 10 (5). pp. 6245-6252. ISSN 2069-5837

Abdul Kadir, Aini Zuhra and Yusof, Yusri and Wahab, Md Saidin (2020) Additive manufacturing cost estimation models—a classification review. The International Journal of Advanced Manufacturing Technology, 107 (NIL). pp. 4033-4053. ISSN 0268-3768

Abdullah, Haslina and Ramli, Rizauddin and Abd Wahab, Dzuraidaqh (2020) Effect of contour interval on minimization of tool path length in pocket milling process. Journal of Engineering Science and Technology, 15 (5). pp. 3502-3513. ISSN 1823-4690

Ahmad, Rosli and Rashid, M. H. S. and Hasan, Sulaiman and Harun, Zawati and Yusof, M. S. and Hassan, Suhaimi and Rahman, M.M. (2020) The effect of holmium on microstructure and mechanical properties of light metal alloy. Journal of Critical Reviews, 7 (8). pp. 1260-1263. ISSN 2394-5125

Al-Alimi, Sami and Lajis, Mohd Amri and Shamsudin, Shazarel and Chan, B.L. and Mohammed, Yahya and Ismail, Al Emran and Sultan, N. M. (2020) Development of metal matrix composites and related forming techniques by direct recycling of light metals: a review. International Journal of Integrated Engineering, 12 (1). pp. 144-171. ISSN 2600-7916

Alias, Siti Salwa and Harun, Zawati and Abu Mansor, Salina (2020) Characterization and performance of rice husk as additive in green ceramic water filter fabricated by slip-casting. World Journal of Engineering, 17 (4). pp. 553-562. ISSN 1708-5284

Asyikin Yusop, Umira and Kang Huai, Tan and Abd.Rahman, Hamimah and Baharuddin, Nurul Akidah and Raharjo, Jarot (2020) Electrochemical performance of barium strontium cobalt ferrite - samarium doped ceria - argentum for low temperature solid oxide fuel cell. In: Materials Science Forum.

Azhar, Faiz Hafeez and Harun, Zawati and Alias, Siti Salwa and Yunos, Muhamad Zaini and Ibrahim, Siti Aida and Abdullahi, Tijjani and Ahmad, Azlinnorazia and Othman, Mohd Hafiz Dzarfan (2020) Self-cleaning antifouling performance based on the surface area of flower-like tio2 as additive for PSf mixed matrix membrane. Macromolecular Research, 28. pp. 625-635. ISSN 1598-5032

BAHAROM, Z. and Idris, M.I. and Lee, T.C. and SYED ABU BAKAR, S.A. and Abdullah, H.Z. (2020) Characterizations on microencapsulated sunflower oil as self-healing agent using In situ polymerization method. In: International Conference on Advanced Materials Characterization Techniques (AMCT 2019), 23rd to 24th July 2019, Putra Regency Hotel, Kangar, Perlis, Malaysia.

BAHAROM, Zulkhibri and IDRIS, Maizlinda Izwana and Lee, Te Chuan and ABDULLAH, Hasan Zuhudi (2020) Comparative study on microencapsulated of natural and waste sunflower oil as self-healing agent. In: International Conference on Advanced Materials Characterization Techniques (AMCT 2019), 23rd to 24th July 2019, Putra Regency Hotel, Kangar, Perlis, Malaysia.

Baharuddin, Nurul Akidah and Abdul Rahman, Nurul Farhana and Abd. Rahman, Hamimah and Somalu, Mahendra Rao and Azmi, Mohd Azham and Raharjo, Jarot (2020) Fabrication of high-quality electrode films for solid oxide fuel cell by screen printing: A review on important processing parameters. International Journal of Energy Research, 44 (11). pp. 8296-8313. ISSN 0363-907X

Ghitheeth, Ali H. and Fawzi, Mas and Wahhab Aljibory, Mohammed (2020) Experimental study of heat transfer enhancement by inserting metal chain in heat exchanger tube. In: 3rd edition of the International Conference on Research in Science, Engineering and Technology, 28–30 October 2020, Madrid, Spain.

Hashim, Mohd Yussni and Mohd Amin, Azriszul and Marwah, Omar Mohd Faizan and Othman, Mohd Hilmi and Hanizan, Nurnajwa Hani and Norman, Mohd Khairul Efni (2020) Two parameters weibull analysis on mechanical properties of kenaf fiber under various conditions of alkali treatment. International Journal of Integrated EngineerinI, 12 (3). pp. 245-252. ISSN 2229-838X

Hassan, S and Yusof, M S and Embong, Z and Maksud, M I (2020) A study of printed La₂O₃ on carbon-glass substrate for micro-flexographic printing process using angle resolve x-ray photoelectron spectroscopy (AEXPS) analysis. Journal of Nuclear and Related Technologies, 17 (1). pp. 8-14. ISSN 1823-0180

Hassan, S. and Yusof, M.S. and Embong, Z. and Ding, S. and Marwah, O.M.F. (2020) A study of printing plate mould development by using 3d printers for micro-flexographic printing process. Journal of Advanced Manufacturing Technology (JAMT), 14 (1). pp. 1-12. ISSN 1985-3157

ISMAIL, N. and IDRIS, M.I. and ABDULLAH, H.Z. (2020) Effects of Ultraviolet (UV) treatment on the properties of black tilapia fish skins gelatin. In: International Conference on Advanced Materials Characterization Techniques (AMCT 2019), 23rd to 24th July 2019, Putra Regency Hotel, Kangar, Perlis, Malaysia.

Idris, M.I. and ADZHARI, M.F. and ABD. BAKIL, S.N. and Lee, T.C. and SELIMIN, M.A. and Abdullah, H.Z. (2020) Surface properties of alginate/chitosan biofilm for wound healing application. In: International Conference on Advanced Materials Characterization Techniques (AMCT 2019), 23rd to 24th July 2019, Putra Regency Hotel, Kangar, Perlis, Malaysia.

Jamaluddin, Nor Athira and Talib, Norfazillah and Abdul Sani, Amiril Sahab (2020) Tribological analyses of modified jatropha oil with hBN and graphene nanoparticles as an alternative lubricant for machining process. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 76 (2). pp. 1-10. ISSN 2289-7879

Kazeem, Abubakar and Badarulzaman, Nur Azam and Wan Ali, Wan Fahmin Faiz (2020) Optimization of wear and hardness of Al–Zn–Mg–Cu alloy fabricated from recycled beverage can using response surface methodology. SN Applied Sciences, 2 (1210). pp. 1-11. ISSN 2523-3971

Kazeem, Abubakar and Badarulzaman, Nur Azam and Wan Ali, Wan Fahmin Faiz (2020) Relating fractographic analysis to yield strength of novel X7475 (Al–Zn–Mg–Cu) alloys produced by recycling aluminium beverage cans. Materials Letters, 262. pp. 1-4. ISSN 0167-577X

Kazeem, Abubakar and Job Ajala, Amkpa and Badarulzaman, Nur Azam and Wan Ali, Wan Fahmin Faiz (2020) Effect of imperfections on and modelling of conductivity and hardness of high-Zn X7xxx cast al-alloys produced from recycled beverage can. The International Journal of Integrated Engineering, 12 (1). pp. 188-194. ISSN 2229-838X

Lukeman, Nur Izzah and Nasir, Siti Hana and El Bakri, Helmy Mustafa (2020) The fit of safety helmet among female. In: Progress in Engineering Application and Technology, 22 Jun 2021, UTHM. (Submitted)

M. A., Azmah Hanim and N., Muhamad Kamil and Wei, Chuan Khang and T. T., Dele‑Afolabi and O., Saliza Azlina (2020) Microstructural and shear strength properties of RHA-reinforced Sn–0.7Cu composite solder joints on bare Cu and ENIAg surface finish. Journal of Materials Science: Materials in Electronics, 31. pp. 8316-8328. ISSN 0957-4522

M. Tahir, A. F. and Rashid, A. R. and Sariff, N. E. and A. Rahim, E. (2020) CO2 laser cutting performance on ultra high strength steel (UHSS). Lasers in Manufacturing and Materials Processing, 7. pp. 15-37. ISSN 2196-7229

M.A., Rabiatul Adawiyah and S.A., Amirul and O., Saliza Azlina and H., Syafiq (2020) Impact of multiple reflow on intermetallic compound of nickel-doped tin-silver-copper on ENImAg substrate. Materialwissenschaft und Werkstofftechnik, 51 (6). pp. 780-786. ISSN 0933-5137

Majeed, Faraj Saeid Adrees and Suhaimi, Mohd Azlan and Mohd Yusof, Nordin and Nabgan, Walid and Ahmad, Rosli and Asmael, Mohammed Basher and Hj.Yusof, Mohd Sallehuddin and Abdullah, Suhail Najm (2020) Effect of combined Ce and Er Addition on Solidification, Microstructure of the Al-7Si-alloy. Journal of Advanced Mechanical Engineering Applications, 1 (1). pp. 36-45. ISSN 2716-6201

Mazlan, Nadia Farhana and Ahmad, Rosli (2020) Material characterization of magnesium elektron ZRE1 alloy with Praseodymium (Pr) and Erbium (Er) additions. Research Progress in Mechanical and Manufacturing Engineering, 1 (1). pp. 146-152. ISSN 2773-4766

Mazlan, Siti Nur Humaira and Abdul Kadir, Aini Zuhra and Foo, Jin Hoe and Yusof, Yusri (2020) Additive manufacturing process optimization for complex lattice design architecture. In: Additive Manufacturing In Product Design And Development. Penerbit UTM Press, pp. 19-34. ISBN 9789835217

Mazlan, Siti Nur Humaira and Abdul Kadir, Aini Zuhra and Yusof, Yusri and Wahab, Md Saidin (2020) Overhang analysis fabricated using fused deposition modelling technique. Journal of Advanced Industrial Technology and Application, 1 (1). pp. 38-47. ISSN 2716-7097

Mohamed Anuar, Rabiatul Adawiyah and Hamidin, Mohamad Shahrom and Osman, Saliza Azlina and Othman, Mohamad Hilmi (2020) Intermetallic compound layer growth at the Interface between Sn-Ag and ENImAg surface finish. International Journal of Emerging Trends in Engineering Research, 8 (1). pp. 52-59. ISSN 2347-3983

Mohd Mustafa, Nur Nabilah and Ma’aram, Azanizawati and Sudin, Izman and Wahab, Md Saidin (2020) Indirect additive manufacturing technique in rapid vacuum casting. In: Additive Manufacturing In Product Design And Development. Penerbit UTM Press, pp. 47-58. ISBN 9789835217

Mohd Zainuri, Mohamad Izwan Saifudin and Wahab, Md Saidin and Hj Ibrahim, Mustaffa and Marwah @ Omar, Omar Mohd Faizan and Sa'ude, Nasuha (2020) Emerging natural fiber-reinforced cement materials and technology for 3D concrete printing: a review. International Journal of Integrated Engineering, 12 (3). pp. 161-177. ISSN 2229-838X

Muhamad Damanhuri, Amir Abdullah and Hariri, Azian and Ab Ghani, Sharin and Md Fauadi, Muhammad Hafidz Fazli and Hussin, Mohamed Saiful Firdaus (2020) Two-level factorial design of the pre-processing activities of polyamide 12 powder in selective laser sintering three-dimensional printing process. Jour of Adv Research in Dynamical & Control Systems, 12 (8). pp. 1167-1177. ISSN 1943-023X

Nor Azman, Muhammad Faez and Ahmad, Rosli (2020) Review of the effect of erbium and neodymium on microstructure and mechanical properties of magnesium alloy. Research Progress in Mechanical and Manufacturing Engineering, 1 (1). pp. 101-106. ISSN 2773-4765

Nurul Alya Zahari, Nurul Alya Zahari and Zaleha Mohamad, Zaleha Mohamad (2020) Crack propagation trajectory for kenaf fibre composite under quasi static loading. JSE Journal of Science and Engineering, 1 (2). pp. 43-48.

Radzi, E. Z. and Wahab, Md Saidin and Sahdan, M. Z. and Hamdan, R. and Zakariah, R. A. (2020) Gravitational aeration tower filter system to increase the dissolved oxygen amount for iron removal in groundwater. International Journal of Integrated Engineering, 12 (3). pp. 207-215. ISSN 2229-838X

Sazali, N. and W. Salleh, W. N. and Ismail, N. H. and Kumaran, K. and Othman, M. H. D. and Harun, Z. (2020) Advanced in carbon membrane by relating to coating carbonization-cycles for oxygen performance. In: Energy Security and Chemical Engineering Congress, WED, 3 NOV - FRI, 5 NOV, 2021, UMP.

Sazali, Norsuhailizah and Harun, Zawati and Sazali, Norazlianie (2020) A review on batch and column adsorption of various adsorbent towards the removal of heavy metal. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 67 (2). pp. 66-88. ISSN 2289-7879

Shariat, Norehan and Sanusi, Shahmir Hayyan (2020) The potential of coconut waste element as an alternative material for roof ceiling purpose. Advanced Research in Natural Fibers, 2 (2). pp. 23-26.

Sukri, N.A. and Saiman, M.P. and Ishak, K. and Wahab, Md Saidin and Rashad, N.F.A. (2020) Characteristic of pineapple leaf fibre using different methods at minimum level with the assist of mechanical breaker. Journal of Advanced Manufacturing Technology (JAMT), 14 (2). pp. 77-88. ISSN 1985-3157

Tan, Ke Wei and Mohamad, Zaleha (2020) The sound absorption coefficient and noise reduction coefficient of rice husk silica. JSE Journal of Science and Engineering, 1 (2). pp. 49-55.

Wan Jamaludin, Wan Akashah and Johar, Muhammad Akmal and Marwah, Omar Mohd Faizan and Mohd Amin, Azriszul (2020) Evaluation of the Potential of Renewable Thermal Energy from Shingles Using Thermoelectric Generator (TEG) for Residential Use Application. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 70 (2). pp. 50-58. ISSN 2289-7879

Widaningrum, Sri and Mohammad, Musli and Ibrahim, Rasidi (2020) Integration the 6th category business excellence framework, the 8th clause ISO 9001:2015 and the 6th category KPKU Indonesia framework. International Journal of Integrated Engineering, 12 (7). pp. 291-300. ISSN 2229-838X