UTHM Institutional Repository

Items where Division is "Faculty of Mechanical and Manufacturing Engineering > Department of Mechanical Engineering Technology" and Year is 2016

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: A | F | I | K | M | O | S | Z
Number of items: 31.

A

Abd Rahman, Ramhuzaini and Liang , He and Sepehri, Nariman (2016) Design and experimental study of a dynamical adaptive backstepping–sliding mode control scheme for position tracking and regulating of a low-cost pneumatic cylinder. International Journal of Robust And Nonlinear Control, 26. pp. 853-875.

Abd Rahman, Ramhuzaini (2016) Dynamical adaptive backstepping-sliding mode control for servo-pneumatic positioning applications: controller design and experimental evaluation. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Abd Rahman, Ramhuzaini and Sepehri, Nariman (2016) Design and experimental evaluation of a dynamical adaptive backstepping-sliding mode control scheme for positioning of an antagonastically paired pneumatic artificial muscles driven actuating system. International Journal of Control. ISSN 00207179

F

Fletcher, David I. and Sanusi, Shahmir H. (2016) The potential for suppressing rail defect growth through tailoring rail thermo-mechanical properties. Wear, 366. pp. 401-406. ISSN 00431648

I

Ibrahim , Mohd Halim Irwan and Mohd Amin, Azriszul and Asmawi, Rosli and Mustafa, Najwa (2016) Influences of restaurantwaste fats and oils (RWFO) from grease trap as binder on rheological and solvent extraction behavior in SS316L metal injection molding. Metals, 6 (19).

Ismail, A. E. (2016) Mode III stress intensity factors of sickle-shaped surface cracks in round bars. Journal Of Mechanical Engineering (JMECHE), 13 (1). pp. 33-44. ISSN 18235514

Ismail, A. E. and Masran, S. H. and Jamian, S. and Kamarudin, K. A. and Mohd Nor, M. K. and Muhd Nor, N. H. and Mohd Tobi, A. L. and Awang, M. K. (2016) Fracture toughness of woven kenaf fibre reinforced composites. In: International Engineering Research and Innovation Symposium (IRIS), 24-25 November 2016, Kings Green Hotel Melaka, Malaysia.

Ismail, A. E. and Noranai, Z. and Muhd Nor, N. H. and Mohd Tobi, A. L. and Ahmad, M. H. (2016) Effect of hybridized fiber wrapped around the aluminum tubes on the crushing performances. In: International Engineering Research and Innovation Symposium (IRIS), 24-25 November 2016, Kings Green Hotel Melaka, Malaysia.

Ismail, Al Emran (2016) Crushing mechanisms of cylindrical winding kenaf fiber reinforced composites. Jurnal Teknologi (Sciences & Engineering), 78 (6). pp. 45-50. ISSN 21803722

Ismail, Al Emran (2016) Mode I stress intensity factors of sickle-shaped surface cracks in round solid bars under bending moment. International Journal of Automotive and Mechanical Engineering (IJAME), 13 (2). pp. 3329-3344. ISSN 21801606

Ismail, Al Emran (2016) Solutions of stress intensity factors of multiple internal axial cracks in hollow cylinders. In: Colloquium of Advanced Mechanics (CAMS2016), 18-19 December 2016, Universiti Tun Hussein Onn Malaysia (UTHM), Johor.

Ismail, Al Emran and Nezere, Norhafizan (2016) Numerical modelling of steel tubes under oblique crushing forces. In: International Conference on Applied Computing, Mathematical Sciences and Engineering.

K

Kee, Huong Lai and Zainuddin, Zarita and Ong, Pauline (2016) A harmony search-based learning algorithm for epileptic seizure prediction. International Journal of Management and Applied Science, 2 (12). pp. 164-169. ISSN 23947926

M

M. Rozlan, S. A. and Zaman, Izzuddin and Manshoor, Bukhari and Khalid, A. and Chan, Shiau Wei and M. Sani, M. S. (2016) Theoretical modelling of a beam with attached spring-mass-damper system. In: International Conference on Automotive Innovation and Green Energy Vehicle (AiGEV2016), 02-03 August 2016, Malaysia Automotive Institute, Cyberjaya.

M. Yusup, Eliza and Mahzan, Shahruddin and Jafferi, Noormaziah and Chung, Wee Been (2016) The effectiveness of TBAF/DMSO in dissolving oil palm empty fruit bunch-cellulose phosphate. Journal of Medical and Bioengineering, 4 (2). pp. 165-169. ISSN 23013796

Mahdi, Ahmed Sahib and Mustapa, Mohammad Sukri and Lajis, Mohd Amri and Abd Rashid, Mohd Warikh (2016) Compression strength and microhardness of recycling milled aluminium (AA6061) for various binder. International Journal of Mechanical and Industrial Technology, 3 (2). pp. 98-104. ISSN 23487593

Mahdi, Ahmed Sahib and Mustapa, Mohammad Sukri and Lajis, Mohd Amri and Abd Rashid, Mohd Warikh (2016) Effect of sintering temperature on compression strength and microhardness of recycling aluminium alloy AA6061 through ball mill process. ARPN Journal of Engineering and Applied Sciences, 11 (1). pp. 659-665. ISSN 18196608

Mahzan, Shahruddin and Elwalwal, Hatem Mostafa and Farag Elghanudi, Muheieddin Meftah (2016) Viability of applying mechanical impedance based structural health monitoring for pipeline: a review. ARPN Journal of Engineering and Applied Sciences, 11 (14). pp. 8679-8683. ISSN 18196608

Mahzan, Shahruddin and Farag Elghanudi, Muheieddin Meftah (2016) Feasibility study of structural health monitoring towards pipeline corrosion monitoring: a review. ARPN Journal of Engineering and Applied Sciences, 11 (14). pp. 8673-8678. ISSN 18196608

Mohd Nor, M. K. and Ho, C. S. and Ma’at, N. (2016) Torsion vehicle model test for automotive vehicle. In: 7th International Conference on Mechanical and Manufacturing Engineering, 1 - 3 August 2016, Jogjakarta, Indonesia.

Mohd Nor, M. K. and Noordin, A. and Ruzali, M. F. S. and Hussen, M. H. and Mustapa@Othman, N. (2016) Development of vehicle model test-bending of a simple structural surfaces model for automotive vehicle sedan. In: 7th International Conference on Mechanical and Manufacturing Engineering, 1 - 3 August 2016, Jogjakarta, Indonesia.

Mohd Nor , M. K. and Ho, C. S. and Ma’at, N. (2016) Nonlinear analysis of collapse mechanism in superstructure vehicle. In: 7th International Conference on Mechanical and Manufacturing Engineering, 1 - 3 August 2016, Jogjakarta, Indonesia.

Mohd Nor , Mohd Khir (2016) Modelling inelastic behaviour of orthotropic metals in a unique alignment of deviatoric plane within the tress space. International Journal of Non-Linear Mechanics. ISSN 00207462

Mohd Nor , Mohd Khir (2016) Unique rotation tensor formulation to predict three-dimensional deformation behaviour of aluminum alloy AA7010. International Journal of Mechanical & Mechatronics Engineering IJMME-IJENS, 16 (04).

Mohd Nor , Mohd Khir and Ma`at, Norzarina (2016) Simplified approach to validate constitutive model formulation of orthotropic materials undergoing finite strain deformation. Journal of Engineering and Applied Sciences, 11 (10). pp. 2146-2154. ISSN 1816949X

Mohd Tobi, Abd Latif and Leen, S. B. and Sun, W. and Shipway, P.H. (2016) Investigation on the plasticity accumulation of Ti-6Al-4V fretting wear through decoupling the effect of wear and surface profile in finite element modelling. In: 43rd Leeds-Lyon Symposium, 06-09 September 2016, Leeds, United Kingdom.

Mohd Tobi, Abdul Latif and Sun, W. and Shipway, P.H. (2016) Evolution of plasticity-based wear damage in gross sliding fretting of a non-conforming Ti-6Al-4V contact. In: 43rd Leeds-Lyon Symposium, 06-09 September 2016, Leeds, United Kingdom.

O

Ong, Kok Meng and Ong, Pauline and Sia , Chee Kiong and Abdul Wahab , Hanani and Jafferi, Noormaziah (2016) Application of modified flower pollination algorithm on mechanical engineering design problem. In: International Conference on Applied Science (ICAS2016), May 25–27, 2016, Hunedoara, Romania.

Ong, Pauline and Taib, Hariati and Azlan , Mohd Azwir and Nasir, Nurul Fitriah and Azmi, Mohd Azham and Md Salleh, Salihatun and Md Zain, Badrul Aisham and Mahzan, Shahruddin and Zainulabidin, Muhd Hafeez and Ahmad, Sufizar and Abd Rahman, Nasrull and Ngali, Zamani and Abd Rahman, Hamimah (2016) Assessment and evaluation for programme learning outcomes in Faculty of Mechanical and Manufacturing Engineering, Universiti Tun Hussein Onn Malaysia. In: International Conference on Applied Science (ICAS2016), May 25–27, 2016, Hunedoara, Romania.

S

Siswanto, W. A. and Nagentrau, M. and Mohd Tobi, A. L. and Tamin, M. N. (2016) Prediction of plastic deformation under contact condition by quasi-static and dynamic simulations using explicit finite element analysis. Journal of Mechanical Science and Technology, 30 (11). pp. 5093-5101. ISSN 1738-494X

Z

Zainulabidin, Muhd. Hafeez and Wan, L. M. and Ismail, A. E. and Kasron, M. Z. and M. Kassim, A. S. (2016) Effect of membrane surface tension and backed-air gap distance on sound absorption characteristics. ARPN Journal of Engineering and Applied Sciences, 11 (8). ISSN 18196608

This list was generated on Tue Oct 22 12:49:19 2019 +08.