Items where Subject is "T Technology > TL Motor vehicles. Aeronautics. Astronautics"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type
Number of items at this level: 51.

Article

Arafat, Mohammad and Ishak, Izuan Amin and Mohammad, Ahmad Faiz and Khalid, Amir and Norrizam, Md. and Jaát, Mohmad and Yasak, Mohd Fuad (2023) Effect of Reynolds number on the wake of a Next-Generation High-Speed Train using CFD analysis. CFD Letters, 15 (1). pp. 1-12. ISSN :2180-1363

Arriffin, Maizatul Najihah and Salama A. Mostafa, Salama A. Mostafa and Umar Farooq Khattak, Umar Farooq Khattak and Mustafa Musa Jaber, Mustafa Musa Jaber and Baharum, Zirawani and Defni, Defni and Gusman, Taufik (2023) Vehicles Speed Estimation Model from Video Streams for Automatic Traffic Flow Analysis Systems. INTERNATIONAL JOURNAL ON INFORMATICS VISUALIZATION, 7 (2). pp. 295-300.

Jalil, Azlis Sani and Md Dawal, Siti Zawiah and Mohmad Zakwan, Norhayati (2012) Human performance in transportation a comparative study of human performance models. IACSIT International Journal of Engineering and Technology, 4 (2). pp. 111-115. ISSN 1793-8236

Khairulzaman, Nurul Nasuha and Shamsuddin, Suhadir and Ibrahim, Norazila (2020) Effect of Ag-doped on electrical transport properties in Pr0.75Na0.25MnO3 manganites. Journal of Advanced Research in Dynamical and Control Systems, 12 (2). 759 -765. ISSN 1943-023X

Mohamad, Mahmod Abd Hakim and Onn, Nurfarahin and Yahya, Mohd Shahir and Abdul Halim, Muhammad Akmal and Rani, Muhammad Arif and Mohd Asri, Ikhwan Hanif and Sanik, Mohd Erwan and Mohd Shah, Nor Shahida (2024) A New Design and Simulation of Smart Sensing for Emergency Vehicle. Journal of Advanced Research in Applied Sciences and Engineering Technology, 35 (1). pp. 1-15. ISSN : 2462-1943

Mohammad Arafat, Mohammad Arafat and Ishak, Izuan Amin and Mohammad, Ahmad Faiz and Khalid, Amir and Mohmad Jaát, Md. Norrizam and Yasak, Mohd Fuad (2023) Effect of Reynolds number on the wake of a Next-Generation High-Speed Train using CFD analysis. CFD Letters, 15 (1). pp. 76-97. ISSN 2180-1363

Mohd Ariff, Mohd Aifaa and Wan Salim, Wan Saiful-Islam and Muhammad Lut Liwauddin, Muhammad Lut Liwauddin and Ramli, Sofia Najwa and Abd. Wahid, Abd. Zaki and Talip, Salihan and Wan Abdul Hamid, Wan Luqman Hakim (2024) U-Space ConOps Implementation in Malaysia. Journal of Aeronautics, Astronautics and Aviation, 55 (15). 295 -305.

Mohd Zaki Bahrom, Mohd Zaki Bahrom and Bukhari Manshoor, Bukhari Manshoor and Badrul Aisham Md Zain, Badrul Aisham Md Zain and Izzuddin Zaman, Izzuddin Zaman and Djamal Hissein Didane, Djamal Hissein Didane and Reazul Haq Abdul Haq, Reazul Haq Abdul Haq and Mohd Nizam Ibrahim, Mohd Nizam Ibrahim Thrust Force for Drone Propeller with Normal and Serrated Trailing Edge. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 101 (1). pp. 160-173. ISSN 2289-7879

Nagarajan, D. and Lathamaheswari, M. and Broumi, Said and Kavikumar, J. (2019) A new perspective on traffic control management using triangular interval type-2 fuzzy sets and interval neutrosophic sets. Operations Research Perspectives, 6. pp. 1-13. ISSN 2214-7160

Pairan, Mohammad Fahmi and Shamsudin, Syariful Syafiq and Yaakub, Mohd Fauzi and Mohd Anwar, Mohd Shazlan (2021) Real-time system identification of an unmanned quadcopter system using fully tuned radial basis function neural networks. Int. J. Modelling, Identification and Control, 37 (2). pp. 128-139.

Pauline Ong, Pauline Ong and Kiat Soon Teo, Kiat Soon Teo and Chee Kiong Sia, Chee Kiong Sia (2023) UAV-based weed detection in Chinese cabbage using deep learning. Smart Agricultural Technology, 4. pp. 1-8.

Raja Mamat, Tengku Nur Azila and Mat Saman, Muhamad Zameri and Sharif, Safian and Simic, Vladimir and Abd Wahab, Dzuraidah (2018) Development of a performance evaluation tool for end-of-life vehicle management system implementation using the analytic hierarchy process. Waste Management and Research (WMR), 36 (12). pp. 1210-1222. ISSN 0734-242X

Welly Sugianto, Welly Sugianto and Abdul Haq, Reazul Haq and Abdol Rahman, Mohd Nasrull (2024) Automobile Workshop Queue System Optimization Using Response Surface. International Journal of Industrial Engineering & Production Research, 35 (1). pp. 1-30.

Zulkafli, Mohd Fadhli and Omar, Ashraf A. and Asrar, Waqar (2014) Flowfield-dependent variant method for moving-boundary problems. AIAA Journal, 53 (4). pp. 1026-1036. ISSN 1533-385X

Zulkarnain, N. and Zamzuri, H. and Saruchi, S. A. and Hussain, A. and Mokri, S. S. and Jedi, A. and Razali, N. and Mohd Nordin, I. N. A. (2018) Optimised combinatorial control strategy for active anti-roll bar system for ground vehicle. International Journal of Engineering and Technology, 7 (4.11). pp. 140-144. ISSN 2227-524X

Book Section

Tajul Baharuddin, Mohamad Faizal and Yusoff, Nor Azizi and Embong, Zaidi and Lim, Alvin John Meng Siang and Hamidon, Nuramidah and Awang, Zarizi (2020) Application of unmmaned aerial vehicle (UAV), infiltration test and stream gauging for determining of hydrology paremeters at Kampung Lama Orang Asli, Kangkar Senangar, Batu Pahat Johor. In: Applications in Environmental Engineering Technology. Penerbit UTHM, pp. 79-90. ISBN 978-967-2389-69-9

Conference or Workshop Item

Jaat, Norrizam and Khalid, Amir and Sulaiman, Syabillah and Azizul, Muhamad Asri and Mohamed, Norirda and Salleh, Hamidon and Razali, Azahari and Mohamed Sunar, Norshuhaila and Abdul Jalal, Rifqi Irzuan (2024) Effect of tire pyrolysis oil, crude palm biodiesel and engine speed on engine performance. In: AIP Conference Proceedings.

Rahim, Mohd Bekri and Yunus, Faizal Amin Nur and Abdul Rahman, Khairul Anuar and Razali, Nizamuddin and Ali, Khairul Fahmi and Jayati, Wan Mohd Akmal (2020) Membangunkan sistem pengudaraan mekanikal Smart Vehicle Ventilation (SVV) pada kenderaan berasaskan IOT. In: Seminar Kebangsaan Majlis Dekan Pendidikan Universiti Awam Malaysia (MEDC2020), 11-12/11/2020, USIM.

Thesis

A.Hamid, Isredza Rahmi (2005) Comparative study on RFID, hotspot and car plate scanning method : for intelligent parking management system. Masters thesis, Universiti Teknologi MARA.

Al Aian, Ahmad Eshtiwey (2011) The aerodynamics analysis of type UAV aircraft with pusher engine configuration by use of DATCOM software. Masters thesis, Universiti Tun Hussein Malaysia.

Amirnordin, Shahrin Hisham (2009) Computational fluid dynamics (CFD) analysis for a catalytic converter design. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Awang, Muhamad Khairudin (2004) Prediction of noise radiation on cylinder head. Masters thesis, Universiti Teknologi Malaysia.

Azlan, Mohd Azwir (2006) Design a CVT lubricant test device. Masters thesis, Universiti Putra Malaysia.

Debnath, Sanjoy Kumar (2022) Energy efficient path-planning for unmanned aerial vehicle. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Hariri, Azian (2009) Conceptual design of a small non-rigid airship with particular attention to its static and dynamic stability. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hassan, Mohd Fahrul (2009) Design and development of an innovative apparatus for producing a spiral catalyst substrate for catalytic converter. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Isa, Khalid (2005) Vision-based autonomous vehicle driving control system. Masters thesis, Universiti Putra Malaysia.

Jajuli, Fatin Afiqah (2017) A comparative evalaution on the performance and emission characteristics of an internal combustion engine using ceramic and metallic catalytic converter. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Khaire Elarosi, Muwfik Faidi (2013) On the development computer, code for determinig the root of equation for transient flight analysis. Masters thesis, Universiti Tun Hussein Malaysia.

M Khalifa, Tarek M. (2012) The flight trajectory analysis on the existing aircraft. Masters thesis, Universiti Tun Hussein Malaysia.

M Mohammed, Abdelrazzak Gumaa (2011) The application of combined momentum and blade element theory for aerodynamics performance analysis of rotating blades. Masters thesis, Universiti Tun Hussein Malaysia.

Malik, Rami Qays (2021) A roadside units positioning framework in the context of vehicle-to-infrastructure based on integrated AHP-entropy and group-VIKOR. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Md Jalil, Mohd Azlis Sani (2005) Development of Al-Cu-SiCp metal matrix composite for automotive applications. Masters thesis, Universiti Malaya.

Mohamed Alazomui, Outman (2014) On the development of computer code for aircraft flight dynamics analysis. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Ali, Mas Fawzi (2007) Development of a direct fuel injector for a two-stroke gasoline engine. Masters thesis, Universiti Teknologi Malaysia.

Mohd Ariffin, Maslina (2013) Enhancing fuel burning efficiency by regulate spark plug voltage supply. Masters thesis, Universiti Tun Hussein Malaysia.

Mohd Kiblee, Shahizul Eza (2005) Lane detection system for autonomous vehicle using image processing techniques. Masters thesis, Universiti Putra Malaysia.

Mohd Yunos, Siti Nur Mariani (2011) Performance characteristics monitoring of turboprop engine for the development of preliminary requirement of an engine testing facility. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Noh @ Seth, Nur Hazirah (2016) Parametric study on the design of baffle for three-dimensional turning diffuser. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Omar, Rosli (2011) Path planning for unmanned aerial vehicles using visibility line-based methods. Doctoral thesis, University of Leicester.

Othman, Mazihah (2013) Analisis keperluan pelajar, guru dan kandungan untuk pembangunan e-bahan instruksional mata pelajaran pengajian kejuruteraan elektrik dan elektronik tingkatan empat: satu kajian kes kualitatif. Masters thesis, Universiti Tun Hussein Malaysia.

Rosli, Naida (2017) An intervention for motorcycle helmet usage based on technology acceptance model. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Soon, Adrian Bee Toing (2013) Intelligent road recognition system for automous vehicle. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Tengku Ahmad, Tengku Marissa (2013) Climate control utilizing solar powered ventilation system for parked car. Masters thesis, Universiti Tun Hussein Malaysia.

Tengku Ahmad, Tengku Marissa (2013) Climate control utilizing solar powered ventilation system for parked car. Masters thesis, Universiti Tun Hussein Malaysia.

Yaakub, Mohd Fauzi (2019) Aerodynamic analysis of groove based vortex trap configuration on the retreating helicopter blade. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Yaakub, Mohd Fauzi (2011) The effect of vortex trap on helicopter blade lift. Masters thesis, Universiti Tun Hussein Malaysia.

Yahya, Mohd Shahir (2005) Designing of public vehicle driver's seat. Masters thesis, Universiti Putra Malaysia.

Zakaria, Mohamad Fauzi (2007) Development of a driver information system based on onboard diagnostic II communication protocol. Masters thesis, Universiti Putra Malaysia.

Zaman @ Bujang, Izzuddin (2005) Study of dynamic behaviour of truck chassis. Masters thesis, Universiti Teknologi Malaysia.

Zulkifli, Abd Fathul Hakim (2019) Diesel-cng dual fuel combustion characterization using vibro-acoustic analysis and response surface methodology. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

This list was generated on Thu Nov 21 22:33:04 2024 +08.