Items where Author is "Khalid , Amir"

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Item Type | No Grouping
Number of items: 87.

Article

Khalid , Amir and Jaat, Norrizam (2016) Effects of ambient density on flow characteristics of biodiesel spray injection using computational fluid dynamics. ARPN Journal of Engineering and Applied Sciences, 11 (8). pp. 1-7. ISSN 1819-6608

Khalid , Amir and Zaman, Izzuddin and Mohd Tobi, Abd Latif and Manshoor, Bukhari (2016) New approach of dynamic vibration absorber made from natural fibres composite. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 1-6. ISSN 1819-6608

Yusof, Humairak and Tamaldin, Noreffendy and M. F. B, Abdollah and Khalid , Amir (2015) Evaluation of the storage effect on the fuel properties for variety biodiesel blends. ARPN Journal of Engineering and Applied Sciences, 10 (17). pp. 1-5. ISSN 1819-6608

Zaman, Izzuddin and Mohamed Salleh, Muhammad and Ismon, Maznan and Manshoor, Bukhari and Khalid , Amir and Mohd Sani, Mohd Shahrir and Araby, Sherif (2014) Study of passive vibration absorbers attached on beam structure. Applied Mechanics and Materials , 660 . pp. 511-515. ISSN 1660-9336

Suardi, Mirnah and Azman, Norazwan and Samsudin, Dahrum and Amirnordin, Shahrin Hisham and Khalid , Amir (2014) Effect of mixture formation of biodiesel-water-air rapid mixing derived from crude palm oil and waste cooking oil in burner combustion. Applied Mechanics and Materials, 660 . pp. 421-425. ISSN 1662-7482

Zakaria, Hanis and Khalid , Amir and Sies, Mohamad Farid and Mustaffa, Norrizal and Manshoor, Bukhari (2014) Effect of storage temperature and storage duration on biodiesel properties and characteristics. Applied Mechanics and Materials , 465 . pp. 316-321. ISSN 1660-9336

Khalid, Amir and Anuar, M. D. and Sapit, Azwan and Razali, Mohd Azahari and Manshoor, Bukhari and Mohd Ali, Mas Fawzi and Zaman @ Bujang, Izzuddin (2014) Experimental investigation of emissions characteristics of small diesel engine fuelled by blended crude palm oil. Applied Mechanics and Materials, 660 . pp. 462-467. ISSN 1662-7482

Samsudin, Dahrum and Othman, Safwan and Anuar, M. D. and Manshoor, Bukhari and Khalid, Amir (2014) Experimental investigation of mixture formation and flame development using the basics technique of schlieren optical visualization principle. Applied Mechanics and Materials, 660 . pp. 474-478. ISSN 1662-7482

Zaman, Izzuddin and Manshoor, Bukhari and Khalid , Amir and Araby, Sherif (2014) From clay to graphene for polymer nanocomposites-a survey. Journal of Polymer Research, 21 (5). ISSN 1572-8935

Ngali, Mohd Zamani and Zakaria, Nazri Huzaimi and Osman, Kahar and Khalid, Amir and Manshoor, Bukhari and Zaman @ Bujang, Izzuddin (2014) Gravitational effect formulation on in-house air-particle flow solver. Applied Mechanics and Materials, 660 . pp. 699-703. ISSN 1662-7482

Ramsy, Him and Ahmad, Thahir and Jaat, M. and Khalid, Amir (2014) Influences of cylinder wall temperature on heat release during compression period. Applied Mechanics and Materials, 660 . pp. 431-435. ISSN 1662-7482

Zaman, Izzuddin and Manshoor, Bukhari and Khalid, Amir and Qingshi, Meng and Araby, Sherif (2014) Interface modification of clay and graphene platelets reinforced epoxy nanocomposites: a comparative study. Journal of Materials Science, 49 (17). pp. 5856-5865. ISSN 1573-4803

Razali, Mohd Azahari and Sapit, Azwan and Mohd Ali, Mas Fawzi and Khalid , Amir and Mohammed, Akmal Nizam (2014) Measurement of thermophoretic velocity in surrounding gas of nitrogen or carbon dioxide. Applied Mechanics and Materials, 554 . pp. 686-690. ISSN 1662-7482

Zaman, Izzuddin and Araby, Sherif and Khalid , Amir and Manshoor, Bukhari (2014) Moisture absorption and diffusivity of epoxy filled layered-structure nanocomposite. Advances in Environmental Biology, 8 (8). pp. 2626-2631. ISSN 1995-0756

Zakaria, Hanis and Khalid , Amir and Sies, Mohamad Farid and Mustaffa, Norrizal (2014) Overview effect of biodiesel storage on properties and characteristics. Applied Mechanics and Materials , 465 . pp. 260-264. ISSN 1660-9336

Khalid , Amir and Manshoor, Bukhari and Alimin, Ahmad Jais and Mustafa, Norrizal and Basharie , Siti Mariam and Sadikin, Azmahani (2014) Performance and Emission of a Diesel Engine Fuelled With Preheated Palm Oil Biodiesel under High Load Conditions. Advanced Materials and Research Vols. 845 (2014), 845 . pp. 61-65.

Mustaffa, Norrizal and Khalid , Amir and Sies, Mohamad Farid and Zakaria, Hanis and Manshoor, Bukhari (2014) Performance and emissions of preheated biodiesel on a compression ignition (CI) engines. Applied Mechanics and Materials , 465 . pp. 291-295. ISSN 1660-9336

Mustaffa, Norrizal and Khalid , Amir and Sies, Mohamad Farid and Zakaria, Hanis and Manshoor, Bukhari (2014) Preheated biodiesel derived from vegetable oil on performance and emissions of diesel engines: a review. Applied Mechanics and Materials , 465 . pp. 285-290. ISSN 1660-9336

Sadikin, Azmahani and Md Noor, Md Iskandar and Mat Isa, Norasikin and Basharie, Siti Mariam and Khalid, Amir (2014) Pressure distribution around mixing blades in biodiesel reactor using computational fluid dynamics (GFD). Applied Mechanics and Materials , 554 . pp. 381-385. ISSN 1660-9336

Khalid , Amir and Amirnordin, Shahrin Hisham and Lambosi, Latip and Manshoor, Bukhari and Sies, Mohamad Farid and Salleh, Hamidon (2014) Spray characteristic of diesel-water injector for burner system. Advanced Materials Research, 845 . ISSN 1662-8985

Zaman, Izzuddin and Mohamed Salleh, Muhammad and Ismon, Maznan and Manshoor, Bukhari and Khalid , Amir and Mohd Sani, Mohd Shahrir and Araby, Sherif (2014) Vibration attenuation of plate using multiple vibration absorbers. MATEC Web of Conferences, 13 . 03003. ISSN 2261-236X

Zaman, Izzuddin and Mohamed Salleh, Muhammad and Manshoor, Bukhari and Khalid , Amir and Araby, Sherif (2014) The application of multiple vibration neutralizers for vibration control in aircraft. Applied Mechanics and Materials , 629 . pp. 191-196. ISSN 1660-9336

Khalid , Amir and Mustafa, Norrizal and Manshoor, Bukhari and Zakaria, Hanis and Alimin, Ahmad Jais and Leman, Abd Mutalib and Sadikin, Azmahani (2014) The comparison of preheat fuel characteristics of biodiesel and straight vegetable oil. Applied Mechanics and Materials Vols. 465-466 (2014), 456 . pp. 161-166.

Manshoor, Bukhari and Yusof, Afifah and Suraya Laily, Suraya Laily and Zaman @ Bujang, Izzuddin and Khalid, Amir (2014) An effect of fractal baffles and impellers with double stage 4-blade rushton turbine to fluid flow behaviour in stirred tank. Applied Mechanics and Materials, 660 . pp. 816-822. ISSN 1662-7482

Azman, Norazwan and Suardi, Mirnah and Khalid, Amir (2014) The effects of storage duration on biodiesel derived from waste cooking oil. Applied Mechanics and Materials, 660 . pp. 386-390. ISSN 1662-7482

Sies, Mohamad Farid and Mustaffa, Norrizal and Zakaria, Hanis and Salleh, Hamidon and Manshoor, Bukhari and Khalid , Amir (2014) A review of the concept of fuel-water internally rapid mixing injector in burner system. Applied Mechanics and Materials , 465 . pp. 296-301. ISSN 1660-9336

Khalid, Amir and Manshoor, Bukhari (2013) Analysis of mixture formation and flame development of diesel combustion using a rapid compression machine and optical visualization technique. Applied Mechanics and Materials, 315 . pp. 293-298.

Khalid , Amir and Mohamad Jaat, Md Norrizam and Zaman, Izzuddin and Manshoor, Bukhari and Mohd Ali, Mas Fawzi (2013) Effect of pilot injection on mixture formation, ignition process and flame development in diesel combustion. Applied Mechanics and Materials , 390 . pp. 327-332.

Khalid , Amir and Mohamad Jaat, Md Norrizam and Zaman, Izzuddin and Manshoor, Bukhari and Mohd Ali, Mas Fawzi (2013) Effect of preheated fuel on mixture formation of biodiesel spray. Applied Mechanics and Materials , 393 . pp. 493-498.

Amirnordin, Shahrin Hisham and Alimin, Ahmad Jais and Khalid , Amir (2013) Effects of palm oil biodiesel blends on the emissions of oil burner. Applied Mechanics and Materials , 315 . pp. 956-959.

Khalid , Amir and Manshoor, Bukhari and Osman, Shahrul Azmir and Mohamad Jaat, Md Norrizam and Mustaffa, Norrizal and Basharie, Siti Mariam (2013) Performance and emissions characteristics of diesel engine fuelled by biodiesel derived from palm oil. Applied Mechanics and Materials, 315 . pp. 517-522.

Zaman, Izzuddin and Manshoor, Bukhari and Khalid , Amir and Araby, Sherif and Ghazali, Mohd Imran (2013) Vibration characteristics of composite plate embedded with shape memory alloy at elevated temperature. Applied Mechanics and Materials , 393 . pp. 655-660. ISSN 1660-9336

Zaman, Izzuddin and Khalid , Amir and Manshoor, Bukhari and Araby, Sherif and Ghazali, Mohd Imran (2013) The effects of bolted joints on dynamic response of structures. IOP Conf. Series: Materials Science and Engineering, 50 . 012018. ISSN 1757-8981

Khalid , Amir and Keisuke, Hayashi and Yoshiyuki , Kidoguchi and Tomoaki , Yatsufusa (2011) Effect of air entrainment and oxygen concentration on endothermic and heat recovery process of diesel ignition. 2011 JSAE/SAE International Powertrains, Fuels and Lubricants Meeting .

Khalid, Amir Effect of ambient temperature and oxygen concentration on ignition and combustion process of diesel spray. Asian Journal of Scientific Research .

Khalid, Amir and Manshoor, Bukhari Effect of high injection pressure on mixture formation, burning process and combustion characteristics in diesel combustion. World Academy Of Science, Engineering and Technology 71 2012 .

Khalid, Amir and Manshoor , Bukhari Effect of high swirl velocity on mixture formation and combustion process of diesel spray. Applied Mechanics and Materials Vols. 229-231 (2012) .

Book

Khalid, Amir (2016) Penyediaan graf penyelidikan. Penerbit Universiti Tun Hussein Onn Malaysia. ISBN 9789670764535

Conference or Workshop Item

Zaman, Izzuddin and Manshoor, Bukhari and Khalid , Amir (2015) Study of vibration absorbers using epoxy reinforced natural fibers. In: International Conference on Applications and Design in Mechanical Engineering 2015, 30-31 March 2015, Georgetown, Penang.

Zaman, Izzuddin and Abdurasad, Mohd Rajim and Manshoor, Bukhari and Khalid , Amir and Mohd Sani, Mohd Shahrir (2015) Study on dynamic behaviour of grass trimmer using finite element analysis. In: International Conference on Applications and Design in Mechanical Engineering 2015, 30-31 March 2015, Georgetown, Penang.

Zaman, Izzuddin and M. Nor, Fethma and Manshoor, Bukhari and Khalid , Amir and Araby, Sherif (2015) Influence of interface on epoxy/clay nanocomposites: 1. Morphology structure. In: International Materials, Industrial, and Manufacturing Engineering Conference (MIMEC), 4-6 February 2015, Bali, Indonesia.

Zaman, Izzuddin and M. Nor, Fethma and Manshoor, Bukhari and Khalid , Amir and Araby, Sherif (2015) Influence of interface on epoxy/clay nanocomposites: 2. Mechanical and thermal dynamic properties. In: International Materials, Industrial, and Manufacturing Engineering Conference (MIMEC), 4-6 February 2015, Bali, Indonesia.

Khalid, Amir and Andsaler, Adiba Rhaodah and Jaat, Norrizam (2015) Effect of high pressure on the flow characteristics of injector using computational fluid dynamics (CFD). In: International Engineering Research and Innovation Symposium 2015 (IRIS), 12–13 September 2015, Putrajaya, Malaysia.

Suardi, Mirnah and Amirnordin, Shahrin Hisham and Khalid, Amir (2015) Effect of mixture formation on combustion in burner system. In: International Engineering Research and Innovation Symposium 2015 (IRIS), 12–13 September 2015, Putrajaya, Malaysia.

Manshoor, Bukhari and Mat Loddin, Mohd Zamadi and Khalid, Amir and Zaman, Izzuddin (2015) Effect of porosity on circle grid perforated plate performance as a static mixer in laminar flow. In: International Conference on Application and design in Mechanical Engineering 2015 (ICADME 2015), 30-31 March 2015, Georgetown, Penang, Malaysia.

Razali, Mohd Azahari and Sapit, Azwan and Hushim, Mohd Faisal and Khalid, Amir and Masataro, Suzuki and Wataru, Masuda (2015) Flame spread behavior over combined fabric of cotton/polyester. In: International Engineering Research and Innovation Symposium 2015 (IRIS), 12–13 September 2015, Putrajaya, Malaysia.

Manshoor, Bukhari and Khalid, Amir and Ibrahim, Nor Afizah and Zaman @ Bujang, Izzuddin (2015) Flow visualization of bubble structure in bubble column reactor for fluid mixing. In: International Engineering Research and Innovation Symposium 2015 (IRIS), 12–13 September 2015, Putrajaya, Malaysia.

Nursal, Ridwan Saputra and Khalid, Amir and Ahmad Tajuddin, Ahmad Syukri and Abd. Hadi, Syahrunniza (2015) Performance and emissions characteristics of alternative biodiesel fuel on small diesel engine. In: International Engineering Research and Innovation Symposium 2015 (IRIS), 12–13 September 2015, Putrajaya, Malaysia.

Yii, Ronny Shi Chin and Khalid, Amir and Abd Ghani, Abd Malek and Mohamed Issak, Mahad and Amirnordin, Shahrin Hisham (2015) A comparison between the fractal and swirl injector of diesel spray characteristics in the burner system. In: International Engineering Research and Innovation Symposium 2015 (IRIS), 12–13 September 2015, Putrajaya, Malaysia.

Mohmad Ja'at @ Mohd Noh, Md Norrizam and Khalid, Amir and Sapit, Azwan and Adibah, Adibah and Basharie, Siti Mariam and Mohd Ali, Mas Fawzi (2015) The influences of injection pressure and ambient temperature on ignition delay and emission. In: International Engineering Research and Innovation Symposium 2015 (IRIS), 12–13 September 2015, Putrajaya, Malaysia.

Suardi, Mirnah and Azman, Norazwan and Samsudin, Dahrum and Mansor, Norani and Khalid, Amir (2014) Analysis of emulsified renewable fuel injector in burner combustion: an overview. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Khalid , Amir and Sapit, Azwan and M. N., Anuar and HIM, Ramsy and Manshoor, Bukhari and Zaman, Izzuddin and Ngali, Mohd Zamani (2014) Analysis of fuel injection parameter on biodiesel and diesel spray characteristics using common rail system. In: 5th International Conference on Mechanical, Industrial and Manufacturing Technologies (MIMT2014), 10-11 Mac 2014, The Gumey Resort hotel & Residence, Pulau Pinang.

Samsudin, Dahrum and Anuar, M. D. and Othman, Safwan and Manshoor, Bukhari and Khalid, Amir (2014) Application of schlieren optical visualization system in external combustion and internal combustion engine: a review. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Manshoor, Bukhari and Md Saufi, Muhammad Faiq and Khalid, Amir and Izzuddin, Zaman (2014) CFD analysis of industrial multi-stage impeller in stirred tank with fractal pattern baffled and impeller. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Sapit, Azwan and Razali, Mohd Azahari and Hushim, Mohd Faisal and Mohamad Jaat, Md Norrizam and Mohamad, Akmal Nizam and Khalid, Amir (2014) Dynamic behavior of rapeseed oil spray in diesel engine. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Lambosi, Latip and Khalid, Amir and Manshoor, Bukhari and Amirnordin, Shahrin Hisham and Lo, Kok Hao (2014) Effect of nozzle angle to combustion characteristic in biodiesel burner. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Khalid, Amir and Abas, Azmi (2014) Effects of fuel additive on performance and emissions characteristics of diesel engine fuelled by biodiesel derived from palm oil. In: International Integrated Engineering Summit (IIES 2014) , 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Amirnordin, Shahrin Hisham and Ismail, Salwani and Yii, RONNY, Shi Chin and Mansor, Norani and Mohd Ali, Mas Fawzi and Khalid, Amir (2014) Effects of nozzle diameter on the spray characteristics of premix injector in burner system. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Yii, Ronny Shi Chin and Amirnordin, Shahrin Hisham and Khalid, Amir (2014) Effects of nozzle shape on the flow characteristics of premix injector using computational fluid dynamics (CFD). In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Mohmad Ja'at @ Mohd Noh, Md Norrizam and Khalid, Amir and Sapit, Azwan and Basharie, Siti Mariam and Andsaler, Adiba Rhaodah and Ramsy, Him (2014) Effects of temperature and ambient pressure on spray characteristics of biodiesel combustion. In: International Integrated Engineering Summit (IIES 2014) , 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Lambosi, Latip and Khalid, Amir and Manshoor, Bukhari (2014) Emission and performance characteristic of biodiesel burner system: a review. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Khalid , Amir and Ishak, Yusri and Manshoor, Bukhari and Sapit, Azwan and Leman, Abd Mutalib and Zaman, Izzuddin (2014) Emissions characteristics of small diesel engine fuelled by waste cooking oil. In: 4th International Conference on Production, Energy and Reliability 2014 (ICPER 2014) , 3-5 June 2014, Kuala Lumpur Convention Centre, Malaysia .

Azman, Norazwan and Manshoor, Bukhari and Samsudin, Dahrum and Khalid, Amir (2014) Experimental investigation of standard handling and storage duration on fuel properties, appearance, burning process and emissions of biodegradable alternative fuel. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Suardi, Mirnah and Azman, Norazwan and Samsudin, Dahrum and Amirnordin, S. H. and Mansor, Norani and Khalid, Amir (2014) Experimental study of the ignition process and combustion of biodiesel-water-air rapid mixing derived from waste cooking oil, crude palm oil and jatropha oil in burner combustion. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Rahman, Mohd Najib and Atan, Nazrul and Mokhtar, Azizul and Khalid, Amir (2014) Influences of intake temperature and bio-petrol fuel temperature on SI engine: an overview. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Ramsy, Him and Khalid, Amir and Andsaler, Adiba Rhaodah and Mohmad Ja'at @ Mohd Noh, Md Norrizam (2014) Modeling of common rail system and constant volume chamber in biodiesel combustion: a review. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Yii, Ronny Shi Chin and Amirnordin, Shahrin Hisham and Mansor, Mohamad Norani and Khalid, Amir (2014) Numerical analysis of nozzle hole shape to the spray characteristics from premix injector in burner system: a review. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Sapit, Azwan and Razali, Mohd Azahari and Mohamad Jaat, Md Norrizam and Mohamad, Akmal Nizam and Khalid, Amir and Manshoor, Bukhari (2014) Optical technique using nano-spark lightsource for macro and microscale image acquisition to study diesel spray atomization. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Mokhtar, Azizul and Atan, Nazrul and Rahman, Najib and Khalid, Amir (2014) Review of performance and emmissions characteristics of bio-additive fuel on SI engine fuelled by biopetrol. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Khalid, Amir and Lambosi, Latip and Suardi, Minah and Amirnordin, Shahrin Hisham and Zaman, Izzudin and Mansor, Norani and Manshoor, Bukhari (2014) Spray characteristic of rapid mixing jatropha oil biodiesel in burner system. In: International Integrated Engineering Summit (IIES 2014) , 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Samsudin, Dahrum and Manshoor, Bukhari and Mohamad, Md Nor Anuar and Othman, M. S. and Khalid, Amir (2014) Study of schlieren optical visualization basics technique and the principle. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Mohamad Jaat, Md Norrizam and Manshoor, Bukhari and Basharie, Siti Mariam and Andsaler, Adiba Rhaodah and Sapit, Azwan and Khalid, Amir (2014) Study on spray characteristics of biodiesel using a rapid compression machine. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Zaman, Izzuddin and Mohamed Salleh, Muhammad and Manshoor, Bukhari and Khalid , Amir and Ngali, Mohd Zamani and Mohd Sani, Mohd Shahrir (2014) Theoretical modelling of plate with attached vibration absorber. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Khalid, Amir and Manshoor, Bukhari and Sapit, Azwan and Razali, Mohd Azahari and Zaman, Izzuddin and Mohamad, Mohd Nor Anuar (2014) The effect of storage container and light exposure on biodiesel characteristics derived by crude palm oil. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Azman, Norazwan and Manshoor, Bukhari and Khalid, Amir (2014) The production and comparison of fuel properties on biodiesel with alternative fuel : a review. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Andsaler, Adiba Rhaodah and Khalid, Amir and Him, Ramsy and Mohamad Jaat, Md Norrizam (2014) A review paper on simulation and modeling of combustion characteristics under high ambient and high injection of biodiesel combustion. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Humairak, Yusof and Tamaldin, Noreffendy and Abdollah, Mohd Fadzli B. and Ali, M. F. and Khalid, Amir (2014) The storage effect on fuel properties and emission for variety biodiesel blends. In: International Integrated Engineering Summit (IIES 2014), 1-4 December 2014, Universiti Tun Hussein Onn Malaysia, Johor.

Othman, Mohd Fahmi and Manshoor, Bukhari and Khalid , Amir (2013) Circle grid fractal plate as a turbulent generator for premixed flame: an overview. In: International Conference on Mechanical Engineering Research (ICMER2013), 1-3 July 2013, Kuantan, Pahang.

Manshoor, Bukhari and Zaman, Izzuddin and Othman, M. F. and Khalid , Amir (2013) Experimental study of circle grid fractal pattern on turbulent intensity in pipe now. In: International Conference on Mechanical Engineering Research (ICMER2013), 1-3 July 2013, Kuantan, Pahang.

Khalid , Amir and Tamaldin, N. and Jaat, M. and Mohd Ali, Mas Fawzi and Mansoor, Bukhari and Zaman, Izzuddin (2013) Impacts of biodiesel storage duration on fuel properties and emissions. In: MITC 2013 : Malaysian International Tribology Conference 2013, 18- 20 November 2013, Kota Kinabalu, Sabah, Malaysia .

Khalid , Amir and Yoshiyuki, Kidoguchi (2010) Analysis of diesel combustion using a rapid compression machine and optical visualization technique. In: 2nd International On-Board Symposium : Human Health, Energy and Environment, Japan.

Khalid , Amir and Tomoaki , Yatsufusa and Takayuki , Miyamoto and Jun , Kawakami and Yoshiyuki , Kidoguchi (2009) Analysis of relation between mixture formation during ignition delay period and burning process in diesel combustion. In: 15th Small Engine Technology Conference (SETC 2009), 3rd-5th November 2009, Penang, Malaysia.

Abdul Ghafir, Mohammad Fahmi and Hasnan, Khalid and Khalid , Amir and Mohd Ali, Mas Fawzi (2007) Cub prix experience: a case study on implementation of POPBL in UTHM. In: 2nd Regional Conference on Engineering Education (RCEE 2007), 3-5 December 2007, Johor Bahru.

Thesis

Khalid , Amir and Alimin, Ahmad Jais and Mustaffa, Norrizal (2014) Development of constant volume chamber and high injection pressure system for bio-diesel combustion. Other thesis, Universiti Tun Hussein Onn Malaysia.

Manshoor, Bukhari and Salleh, Hamidon and Khalid, Amir and Abdullah, Aslam and Zakaria, Hanis and Othman, Mohd Fahmi (2014) A new approach in determine of the coefficient of variation (COV) for internal rapid mixing using a space filling circle grid fractal for improving a combustion burning limits. Other thesis, Universiti Tun Hussein Onn Malaysia.

Basharie, Siti Mariam and Mohamad Jaat, Md Norrizam and Khalid , Amir and Alimin, Ahmad Jais and Manshoor, Bukhari and Mohd Ali, Mas Fawzi and Salleh, Hamidon and Mohammad, Md Nor Anuar (2014) A new approach in exploration the air entrainment, endothermic and heat recovery process of biodiesel ignition. Other thesis, Universiti Tun Hussein Onn Malaysia.

Khalid , Amir (2006) Performance analysis of an air conditioning system using rotary compressor. Masters thesis, Universiti Teknologi Malaysia.

This list was generated on Sun Sep 24 18:16:09 2017 MYT.