Items where Division is "Faculty of Mechanical and Manufacturing Engineering > Department of Mechanical Engineering" and Year is 2021
 | Up a level |
Article
Abdul Mukhti, Muhammad Ammar Qayyum and Didane, Djamal Hissein and Ogab, Mohammed and Manshoor, Bukhari (2021) Computational fluid dynamic simulation study on NACA 4412 airfoil with various angle of attacks. Journal of Design for Sustainable and Environment, 3 (1). pp. 1-8.
Adiat, I. Arogundade and S.M.Megat-Yusoff, Puteri and Ahmad, Faiz and H.Bhat, Aamir and O.Afolabi, Lukmon (2021) Modification of bauxite residue with oxalic acid for improved performance in intumescent coatings. Journal of Materials Research and Technology, 12. pp. 679-687.
Azhar, Faiz Hafeez and Harun, Zawati and Hubadillah, Siti Khadijah and Raja Ahmad, Raja Adibah and Sazali, Norsuhailizah and Syamsul Bahri, Syamsutajri and Ibrahim, Siti Aida and Hussin, Rosniza (2021) Fabrication of mixed matrix membrane containing chlorophyll extracted from spinach for humic acid removal. Materials Today: Proceedings, 46. pp. 2058-2064.
Buwono, H. P. and Amrullah, U. S. and Takwim, R. N. A. and Kaavessina, M. and Nasir, N. F. (2021) High nickel deposition at low voltage electroplating process by a combination of anions. Journal of Advanced Manufacturing Technology (JAMT), 15 (3). ISSN 1985-3157
Chandran, Yutheish and Didane, Djamal Hissein and , Mohammed Ogab, Mohammed (2021) Assessment of wind energy potential at Gong Kedak and Pantai Chendering, Malaysia. Journal of Design for Sustainable and Environment, 3 (1). pp. 1-7.
Ismail, Iman Fitri and Mas Fawzi, Mas Fawzi and Wan Jamaludin, Wan Akashah and Madon, Rais Hanizam and Abdullah, Ahmad Fauzan and Abdullah, Mohamad Ashik (2021) Development of a lock biometric authentication system for a battery powered locking device. The International Journal of Integrated Engineering, 13 (2). pp. 16-23. ISSN 2229-838X
Nursal, Ridwan Saputra and Khalid, Amir and Abdullah, Iqbal Shahridzuan and Jaat, Norrizam and Darlis, Nofrizalidris and Koten, Hasan (2021) Autoignition behavior and emission of biodiesel from palm oil, waste cooking oil, tyre pyrolysis oil, algae and jatropha. Fuel, 306. ISSN 0016-2361
Samsudin, Muhammad Zahid and Didane, Djamal Hissein and Elshayeb, Said A. and Manshoor, Bukhari (2021) Assessment of solar energy potential in Johor, Malaysia. Journal of Design for Sustainable and Environment, 3 (1). pp. 1-6.
Suksuwan, Wasu and Mohideen Batcha, Mohd Faizal and Palamanit, Arkom and Wae-hayee, Makatar (2021) The effect of Biomass Shapes on combustion characteristic in updraft chamber. International Journal of Integrated Engineering (IJIE), 13 (4). pp. 163-171. ISSN 2229-838X
Conference or Workshop Item
Adnan A. Alshaer, Adnan A. Alshaer and Ainun Rahmahwati, Ainun Rahmahwati and Ramzi Qasem, Ramzi Qasem (2021) Biosynthesis of zinc oxide microparticles by using palm oil leaves extract. In: 2021 International Congress of Advanced Technology and Engineering (ICOTEN), July 4-5, 2021, Yemen.
Thesis
Abdul Rahim, Putri Syalabiah (2021) The effects of silica (SiO2) derived from rice husk composition and sintering temperature on the fabrication of silica (SiO2) and silica-nickel oxide (SiO2-NiO) porous bodies. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Abed, Farook Nehad (2021) Enhancement the performance of wire cutting process by additives nanopowder alumina (Al2O3). Doctoral thesis, Universiti Tun Hussein Onn Malaysia.
Ahmad, Muhammad Fazrulhelmi (2021) Pembelajaran berasaskan aplikasi iedutech berdasarkan gaya pembelajaran visual dalam kalangan pelajar Pendidikan Teknikal Dan Vokasional (PTV). Masters thesis, Universiti Tun Hussein Malaysia.
Ahmed Bhutto, Aqeel (2021) Development of ADC14 hypereutectic ALSi alloy based composite reinforced with SiC , Al2O3 and TiB2 through stir casting. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.
Azman, Naqibah (2021) Establishment of checklist of design for safety (DfS), life cycle analysis (LCA) and design for manufacturing (DFM) for ivd medical device based on IEC 60601. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Azman, Naqibah (2021) Establishment of checklist of design for safety (DfS), life-cycle analysis (LCA) and design for manufacturing (DFM) for IVD medical device based on IEC 60601. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Baharom, Zulkhibri (2021) Microencapsulation of waste sunflower oil as natural self-healing corrosion agent for coating applications. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.
Danjuma, Safyanu Bashir (2021) Conceptual design and multidisciplinary optimisation of power device for solar powered aircraft. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.
Darsani, Adilah (2021) The fused deposition modeling of POFA reinforced composites polymer. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Fakhri, Omar Mohammed (2021) A new empirical model to predict stress intensity factor for double interacting surface cracks located in hollow cylinder. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.
Fong, Mun Kit (2021) Polycaprolactone (PCL) / polylactice acid (PLA) reinforced with polyethlene gylcol (PEG) and nano- hydroxyapatite (n-HA) for fused deposition modeling (FDM) composite filament. Masters thesis, Universiti Tun Hussein Malaysia.
Ghitheeth, Ali Hussein (2021) Thermal performance enhancement of a heat exchanger using metal chain as a novel turbulator. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.
Hamza, Sabah Salim (2021) Crashworthiness capability of jute and glass fibre reinforced epoxy tubes under quasi-static loading condition for automotive application. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.
Hamza, Sabah Salim (2021) Crashworthiness capability of jute and glass fibre reinforced epoxy tubes under quasi-static loading condition for automotive application. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.
Ho, Choon Sin (2021) Characterisation of deformation behaviour and damage progression of recycled aluminium alloy AA6061. Doctoral thesis, Universiti Tun Hussein Malaysia.
Iliyas Ahmad, Maznah (2021) Integrated monitoring system based on service-oriented IOT architecture in open step-nc environment. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.
Ismail, Muammar Mukhsin (2021) Knock phenomenon analysis on a diesel-CNG dual fuel engine using experimental fuel ratio. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.
K Frhan, Nhad (2021) CFD investigation on hydrogen enrichment effect to dual-fuel direct injection diesel engine. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.
Kamardin, Ili Liyana Khairunnisa (2021) Low-temperature growth of zinc oxide structures on flexible conductive substrate: effect of naoh and C7H8O9 presence in sol-gel. Masters thesis, Universiti Tun Hussein Malaysia.
Kareem, Ali Kamil (2021) Parametric optimization of the femoropopliteal artery stent design based on numerical analysis. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.
Khairulfuaad, Riyadhthusollehan (2021) Computational analysis on micro-shunt of minimally invasive glaucoma-surgery (MIGS) in severe glaucoma. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Khan, Zohaib (2021) Barriers factor of ISO 9001:2015 implementation in the manufacturing industry of Pakistan. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Khoo, Weily (2021) Electrospun fish skin gelatin scaffolds for functional tissue engineering of articular cartilage. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.
M. Letchumanan, Shaktivell (2021) Simulation of lamination orientation for carbon fiber reinforced polymer as a wrapping structure on piping system. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Mahli, Maximus Kohnizio (2021) Wear behavior and mechanical properties of al-based FGM. Masters thesis, Universiti Tun Hussein Malaysia.
Moh Halmi, Mohamad Ariff (2021) Effect of high velocity oxy-fuel (HVOF) coatings on fatigue behaviour of carbon steel. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Mohammed Al-Alimi, Sami Abdo (2021) Modification and optimization of boron carbide and zirconia as reinforcement in hot equal channel angular processing solid state recycling AA6061 aluminium. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.
Mohd Zainuri, Mohamad Izwan Saifudin (2021) Study on kenaf powder reinforced cement materials for concrete 3d printing process. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Muda, Rizamarhaiza (2021) Fabrication SiO2 -NiO foam via replication technique for steam methane reforming catalyst at low temperatures. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.
Muhamad Damanhuri, Amir Abdullah (2021) PA12 nylon dust reduction of selective laser sintering reprocessing by optimization of refresh rate and powder handling. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.
Muhammed Asri, Noor Athirah (2021) Smart urban district: a case study in Sri Gading. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Muhd Nor, Nik Hisyamudin (2021) To develop a new mineral carbonation process that have a high efficiency in CO2 absorption into industry slag using low energy mechanical milling. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Muhsin Al-Juhaishi, Lafta Flayih (2021) Effect of laminar and turbulent flow through a curved channel with a rectangle section by using baffles in cement industry. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.
Obayes, Noor Hatem (2021) New optimization feature for the developed open cnc controller based on ISO 6983 and ISO 14649. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.
Ong, Kok Meng (2021) A modified flower pollination algorithm and carnivorous plant algorithm for solving engineering optimization problem. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.
Sharif, Hafiz Zafar (2021) Optimal design of net zero energy residential buildings in tropical climate. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.
Sidek, Noor Azizah (2021) A guided artificial bee colony (GABC) heuristic for permutation flowshop scheduling problem (PFSP). Doctoral thesis, Universiti Tun Hussein Onn Malaysia.
Wan Jamaludin, Wan Akashah (2021) Evaluation of a passive cooling system for embedded thermoelectric generator in concrete shingles for Renewable energy. Masters thesis, Universiti Tun Hussein Malaysia.
Yahya, Mohd Shahir (2021) A contingency-based decision support instrument for selecting lean production tools and techniques. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.
Yahya, Mohd Shahir (2021) A contingency-based decision support instrument for selecting lean production tools and techniques. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.
Zainul Abidin, Zainul Ameerul Ikhsan (2021) Development of a lab-scale hybrid vehicle system for small gasoline engine. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Zulkefli, Aina Syazwana (2021) Effect of operating parameter on membrane distillation performance using kapok fibre for humic acid treatment. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Other
Aidil, Nur Muhammad and Hariri, Azian (2021) ASHRAE global thermal comfort database ii: thermal comfort of mechanically ventilated and naturally ventilated office building. Penerbit UTHM, UTHM.
Kazeem, Abubakar and H. Rady, Mohammed and Badarulzaman, Nur Azam and Wan Ali, Wan Fahmin Faiz and Suhaimi, Mohd Azlan and Jikan, Suzi S. and Abd Rahim, Shayfull Zamree and Sharif, Safian (2021) Effect of processing conditions on the fracture behavior of Al-5Zn�1.5Mg-1.0Mn-0.35Cu alloy fabricated from recycled beverage cans (RBCs) for bumper beam applications. Weldpro Sales & Services S/B.
Mashuri, Muhammad Amirul Adli and Abd Rahman, Hamimah (2021) Fabrication of multilayers electrodes and electrolyte via screen printing for metal supported solid oxide fuel cell. Penerbit UTHM, UTHM.
Mukhtar, Muhammad Faiz Hakimi and Mahmod, M. F. (2021) Simulation analysis of ultrasonic testing in steel-based butt weld joint. Penerbit UTHM, UTHM.
Rajah, Sathis and Nasir, Nurul Fitriah (2021) Effects of inlet velocity of a bubble column reactor on the fluid flow pattern for biodiesel production. Penerbit UTHM, UTHM.
Rosman, Nurafiqah and Wan Salleh, Wan Norharyati and Mohd Razali, Nur Aqilah and Ahmad, Siti Zu Nurain and Ismail, Nor Hafiza and Aziz, Farhana and Harun, Zawati and Ismail, Ahmad Fauzi and Yusof, Norhaniza (2021) Ibuprofen removal through photocatalytic filtration using antifouling PVDF- ZnO/Ag2CO3/Ag2O nanocomposite membrane. Elsevier.
Shaifull Zaman, Sharmine Wani Zakirah and UNSPECIFIED (2021) Characterization and review of dual composite cathodes LSCF-SDC/YSZ-SDC for intermediate to low temperature solid oxide fuel cel. Penerbit UTHM, UTHM.
Zakaria, Sazalina and R. Ahmad, Radin Diana and Abbas, Ahmad Rosly and Mohideen Batcha, Mohd Faizal and Zanil, Mohd Fauzi (2021) Stochastic type-2 fuzzy modelling on GHG emission prediction for gas-fired power plant. IOP.