Items where Division is "Faculty of Civil Engineering and Built Environment > Department of Civil Engineering : Building and Construction Engineering" and Year is 2018

A. Khalid, Nur Hafizah and Ismail, Mohammad and Mohd. Sam, Abd Rahman and Mohamed, Azman and A. Ismail, Mohamed and Jamellodin, Zalipah and Salleh, Norhafizah and A. Hamid, Noor Azlina and A. Majid, Masni (2018) Physico-mechanical properties of polymer concrete containing micro-filler of palm oil fuel ash. Advanced Science Letters, 24 (6). pp. 3974-3977. ISSN 1936-6612

Abd Aziz, Sahrir and Kassim, Rozilah and Mohd Masirin, Mohd Idrus (2018) Railway development and the impact to Malaysian economy. Journal of Advanced Research in Dynamical and Control Systems, 10 (6). pp. 272-280. ISSN 1943-023X

Abd Rahman, Norashidah and Khairuddin, Siti Amirah Azra and Jamaluddin, Norwati and Mohd Jaini, Zainorizuan (2018) Strength of reinforced fibrous foamed concrete-filled hollow section. 0255-5476, 936. pp. 219-223. ISSN 0255-5476

Abdul Hamid, Abdul Rahim and Mohd Khazid, Nur Inayah and Yunus, Riduan and A Halim, Hazruwani and Abdul Razak, Amall Raihan (2018) The emerging of employment gap in the Malaysian construction industry. Journal of Physics: Conference Series, 1049. pp. 1-8. ISSN 1742-6588

Abdulrazzaq Azeez, Alyaa and Jamaluddin, Norwati and Abd Rahman, Norashidah and Hassen, Douread Raheem and Attiyah, Ali Naji (2018) Experimental and analytical study of pvc confined concrete cylinders. Journal of Engineering and Applied Sciences, 13 (8). pp. 2145-2151. ISSN 1816-949x

Ahmad Nazri, Mohamad Izzat Al Ridhwan and Abas, Nor Haslinda and Mohd Affandi, Haryanti and Deraman, Rafikullah and Hasmori, Muhammad Fikri and Nagapan, Sasitharan and Abas, Nor Ain and Mustaffa Kamal, Mohd Firdaus (2018) A survey on work-related musculoskeletal disorders among construction trades. International Journal of Integrated Engineering, 10 (4). pp. 131-139. ISSN 2229-838X

Alaa A., Shakir and Wan Ibrahim, M. H and Shahidan, S (2018) The effect of palm oil clinker and oil palm shell on the compressive strength of concrete. Iranian Journal of Science and Technology, Transactions of Civil Engineering, 43. pp. 1-14. ISSN 2228-6160

Alnadish, Adham and Aman, Mohd. Yusri (2018) Mechanistic approach for reducing the thickness of asphalt layer incorporating steel slag aggregate. Civil Engineering Journal, 4 (2). pp. 334-345. ISSN 2476-3055

Alnadish, Adham and Aman, Mohd. Yusri (2018) A study on the economic using of steel slag aggregate in asphalt mixtures reinforced by aramid fiber. ARPN Journal of Engineering and Applied Sciences, 13 (1). pp. 276-292. ISSN 1819-6608

Antonyová, Anna and Antony, Peter and Abdullah, Abdul Halid and Nagapan, Sasitharan and Daud, Zawawi and Abubakar, Mahmoud Hijab (2018) Certain building materials with respect to their thermal properties as well as to their impact to environment. International Journal of Integrated Engineering, 10 (4). pp. 126-130. ISSN 2229-838X

Bhatti, Imtiaz Ali and Abdullah, Abd Halid and Nagapan, Sasitharan and Bhatti, Nabi Bux and Sohu, Samiullah and Ahmed Jhatial, Ashfaque (2018) Implementation of building information modeling (BIM) in Pakistan construction industry. Engineering, Technology & Applied Science Research, 8 (4). pp. 3199-3202. ISSN 1792-8036

Bilema, Munder A and Aman, Mohd. Yusri and Hassan, Norhidayah A and Ahmad, Kabiru A and Elghatas, Hamza M and Radwan, Ashraf A and Shyaa, Ahmed S (2018) Moisture sensitivity of crumb rubber modified modifier warm mix asphalt additive for two different compaction temperatures. IOP Conference Series: Earth and Environmental Science, 140. pp. 1-8. ISSN 1755-1315

Burhanudin, Mohd Khairy and Wan Ibrahim, Mohd Haziman and Mohd Sani, Mohd Syahrul Hisyam and Juki, Mohd Irwan and Jamaluddin, Norwati and Putra Jaya, Ramadhansyah and Shahidan, Shahiron and Basirun, Nurul Fasihah and Mohd Bosro, Mohamad Zulhairi (2018) Influence of ground coal bottom ash with different grinding time as cement replacement material on the strength of concrete. Malaysian Construction Research Journal (MCRJ), 4 (2). pp. 93-102. ISSN 1985-3807

Djamaluddin, Abdul Rachman and Caronge, Muhammad Akbar and Tjaronge, M. W. and Md. Noor, Nurazuwa and Rahim, Irwan Ridwan (2018) Abrasion resistance and compressive strength of unprocessed rice husk ash concrete. Asian Journal of Civil Engineering, 19. pp. 867-876. ISSN 1563-0854

Dullah, Hayana (2018) Compatibility assessment for physical and mechanical properties of empty fruit bunch cement-bonded fibreboard. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hasmori, Muhammad Fikri and Said, Ilias and Deraman, Rafikullah and Abas, Nor Haslinda and Nagapan, Sasitharan and Ismail, Mohd Hanif and Khalid, Faisal Sheikh and Roslan, Ahmad Farhan (2018) Significant factors of construction delays among contractors in Klang Valley and its mitigation. International Journal of Integrated Engineering, 10 (2). pp. 32-36. ISSN 2229-838X

Ibrahim, Izzah Sofea (2018) Forecasting housing demand in Terengganu using multinomial logit. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ismail, Hassan and Akasah, Zainal Abidin and Nagapan, Sasitharan and Khamis, Azme (2018) An investigation on benefits and future expectation of Industrialised Building System (IBS) implementation in construction practices. Advanced Journal of Technical and Vocational Education, 2 (2). pp. 12-18. ISSN 2550-2174

Jamaluddin, Norwati and Yeoh, David and Abdul Ghani, Abdul Halim and Koh, Heng Boon and Shah Ayob, Sallehudin and Wan Ibrahim, Mohd Haziman and Mohamad, Noridah and Tuan Chik, Tuan Norhayati and Abd. Ghafar, Nor Hayati (2018) A case study of residential buildings subjected to cracking failures. International Journal of Integrated Engineering, 10 (2). pp. 118-122. ISSN 2229-838X

Jamellodin, Zalipah and Mohd Saman, Hamidah and Adnan, Suraya Hani and A. Khalid, Nur Hafizah and Abdul Hamid, Noor Azlina and A. Majid, Masni and Salleh, Norhafizah (2018) Flexural behaviour of plain concrete prism strengthened by textile fine grained mortar. Advanced Science Letters, 24 (6). pp. 3982-3985. ISSN 1936-6612

Jamellodin, Zalipah and Nor Azhar, Norazreen and Jamaly, Mohamad Arif and A. Majid, Masni and Salleh, Norhafizah and Abdul Hamid, Noor Azlina and Ismail, Noorli and Adnan, Suraya Hani Adnan and Abdul Rashid, Nur Nadhirah (2018) Strength of blended cement mortar containing palm oil fuel and eggshell ashes. International Journal of Engineering & Technology, 7 (3.7). pp. 598-600. ISSN 2227-524X

Kaliannan, Suaathi and Nagapan, Sasitharan and Abdullah, Abd Halid and Sohu, Samiullah and Ahmed Jhatial, Ashfaque (2018) Determining root cause of construction waste generation: a global context. Civil Engineering Journal, 4 (11). pp. 2539-2547. ISSN 2476-3055

Kamaruddin, Sufian and Wan, Inn Goh and Ahmed Jhatial, Ashfaque and Tahir Lakhiar, Muhammad (2018) Chemical and fresh state properties of foamed concrete incorporating palm oil fuel ash and eggshell ash as cement replacement. International Journal of Engineering & Technology, 7 (4.3). pp. 350-354. ISSN 2227-524X

Khamis, Norasyikin (2018) Perlaksanaan MS 2593:2015 (kod amalan kemudahan kediaman sementara pekerja tapak bina) di kalangan kontraktor gred 6 dan gred 7. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Lee, Yeong Huei and Lim, Ming Han and Lee, Yee Ling and Lee, Yee Yong and Tan, Cher Siang and Mohammad, Shahrin and Ma, Chau Khun (2018) Compressive strength of lightweight foamed concrete with charcoal as a sand replacement. Indian Journal of Engineering and Materials Sciences, 25 (1). pp. 98-108. ISSN 0971-4588

M. Mustafa, Mohamed (2018) Low velocity impact response of rc beam with artificial polyethylene aggregate as concrete block infill. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Md. Ali, Massofia and Abas, Nor Haslinda and Mohd Affandi, Haryanti and Abas, Nor Ain (2018) Factors impeding the industrialized building system (IBS) implementation of building construction in Malaysia. International Journal of Engineering & Technology, 7 (4). pp. 2209-2212. ISSN 2209-2212

Moftah Solla, Mohamed N (2018) Building information modeling (BIM) and green building index (GBI) assessment framework for non-residential new construction building (NRNC). Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mohamad Rawan, Nurfilzah (2018) Housing demand prediction in Selangor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohammad, Noor Shuhada (2018) Flexural performance of textile fine grained mortar containing risk husk ash as a partial cement replacement in reinforced concrete beams. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Abdullah, Muhamad Shahril (2018) The criteria and potential adaptive reuse of pre-war shophouses. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Noor, Siti Rahimah and Yunus, Riduan and Abdullah, Abd Halid and Nagapan, Sasitharan and Syahir Syed Mazlan, Syed Mohamad (2018) Insights into the adoption of lean management in industrialised building system (IBS) implementation: the drivers and challenges. International Journal of Engineering & Technology, 7 (3.23). pp. 22-31. ISSN 2227-524X

Mohd Zuki, Sharifah Salwa and Shahidan, Shahiron and Choong, Kok Keong and Jayaprakash, J. (2018) Effectiveness of repair method using hybrid fiber reinforced polymer fabric on concrete-filled double skin steel tubular columns exposed to fire. Malaysian Construction Research Journal (MCRJ), 4 (2). pp. 239-250. ISSN 1985-3807

Putra Jaya, Ramadhansyah and Che Wan, Che Norazman and Hainin, Mohd Rosli and Mohd Warid, Muhammad Naqiuddin and Wan Ibrahim, Mohd Haziman and Mohamed Nazri, Fadzli and Arshad, Mohd Fadzil (2018) Strength properties of rice husk ash concrete under sodium sulphate attack. International Journal of Integrated Engineering, 10 (4). pp. 199-202. ISSN 2229-838X

Raheem Hassan, Douread (2018) Shear strengthening and repair of deep beams with and without web reinforcement using near-surface mounted CFRP bars. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ridzuan, Mohd Baharudin and Daud, Zawawi and Ahmad, Zulkifli and Abd Latiff, Ab Aziz and Awang, Halizah (2018) Leachate treatment using up-flow anaerobic sludge blanket system. International Journal of Integrated Engineering, 10 (1). pp. 62-65. ISSN 2229-838X

Sheikh Khalid, Faisal and Juki, Mohd Irwan and Wan Ibrahim, Mohd Haziman and Othman, Norzila and Shahidan, Shahiron (2018) Performance of plastic wastes in fiber-reinforced concrete beams. Construction and Building Materials, 183. pp. 451-464. ISSN 0950-0618

Sohu, Samiullah and Abdullah, Abd Halid and Nagapan, Sasitharan and Ahmed Jhatial, Ashfaque and Tahir, Muhammed (2018) Contributing cost variation factors in highway projects. Civil Engineering Journal, 4 (8). pp. 1793-1798. ISSN 2476-3055

Ullah, Kaleem (2018) Mitigation measures for critical factors causing cost overrun in Malaysian building projects. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Z. A., M. Hazreek and Z., M. Nizam and M., Aziman and M. F., Md Dan and M. Z., N. Shaylinda and T. B., M. Faizal and M. A., N. Aishah and Ambak, K. and Rosli, S. and Rais, Y. (2018) Mapping on slope seepage problem using Electrical Resistivity Imaging (ERI). Journal of Physics: Conference Series, 995 (1). pp. 1-10. ISSN 1742-6588