Items where Division is "Faculty of Civil Engineering and Built Environment > Department of Civil Engineering : Building and Construction Engineering" and Year is 2021

A

Abass Younis, Fatma Hussien (2021) Thermal performance improvement for residential buildings in the tropics through the application of green façade and green roof. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Ghaffar, Fatin Shafirah and Mohd Zuki, S. S. and Shahidan, S. and Mohamed Nazri, Fadzli and Abdul Rahim, Mustaqqim and Mohammad Azmi, Mohamad Azim and Abdul Rahman, Norashidah and W. Ibrahim, M. H. (2021) Mechanical properties of concrete containing untreated palm oil fuel ash and egg shell powder. In: Proceedings of the Sustainable Concrete Materials and Structures in Construction 2020. Springer, pp. 259-270.

Abdul Rahman, Junita (2021) Chemical and biological reactions of solidification of peat using ordinary portland cement (OPC) and coal ashes. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Adnan, Suraya Hani and Mohd Yassin, Nurain Izzati and Shahidan, Shahiron and Osman, Mohamad Hairi and Ahmad Jeni, Mohamad Luthfi and Wan Jusoh, Wan Amizah and Jamellodin, Zalipah and Abdul Hamid, Noor Azlina and Ahmad, Faridahanim (2021) Concrete brick properties incorporating EPS and POFA as replacement materials. Journal of Advanced Research in Materials Science, 77 (1). pp. 14-25. ISSN 2289-7992

Ali Detho, Amir (2021) PA12 nylon dust reduction of selective laser sintering reprocessing by optimization of refresh rate and powder handling. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Aminuddin, Mohamad Yuzwan Aliff (2021) Mechanical and durability properties of sand cement brick containing recycled concrete aggregate and crumb rubber as partial sand replacement material. Masters thesis, Universiti Tun Hussein Malaysia.

Arifin, Siti Nor Hidayah (2021) Photocatalytic degradation of triclocarban in artificial bathroom greywater by modified tio₂ nanotubes coated with zeolite (TNTs/ZEO). Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Awang, Halizah and Kankia, Jamilu Danyaro and Roddin, Rohayu and Daud, Zawawi and Abd Rahman, Azmanirah and Yasak, Zurina (2021) Exploring a necessity of technical skills for an informal roadside metalwork fabrication apprenticeship practice. Journal of Technical Education and Training, 13 (1). pp. 119-127. ISSN 2229-8932

Azmi, Mohammad Izzat Shaffiq (2021) The influence of cation exchange capacity towards electrical resistivity value for fine grained soil. Masters thesis, Universiti Tun Hussein Onn Malaysia.

C

Chin Foo, Lee (2021) Management factors affecting time and cost performance of construction projects. Masters thesis, Universiti Tun Hussein Malaysia.

D

Deraman, Rafikullah and Mustaffa, Rabiatul Syahindah and Ismail, Mohd Hanif and Hasmori, Muhammad Fikri and Nagapan, Sasitharan (2021) The effect of metakaolin in production of low thermal conductivity cement sand brick. In: Sustainable Waste Utilization in Bricks, Concrete, and Cementitious Materials. Springer Link, pp. 1-19.

F

Fadzil, Nur Syuhada (2021) Barriers and enablers in risk management practices in construction industry amongst bumiputera contractors. Masters thesis, Universiti Tun Hussein Malaysia.

J

Johari, Nurul Nadia (2021) Particle size and preloading pressure Relationship on the consolidation properties of peat soil. Masters thesis, Universiti Tun Hussein Malaysia.

K

Kaliannan, Suaathi (2021) Structural equation modelling of construction waste root causes and waste generation rate in Malaysian construction industry. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

M

Mohamed Bilema, Munder Abdullah (2021) Reclaimed asphalt pavement with waste frying oil and crumb rubber. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Amdan, Nur Syahirah (2021) The effect of different concentration of composite coagulant on different arrangement of electrodes for hybrid composite coagulation and lector coagulation treatment of landfill leachate. Masters thesis, Universiti Tun Hussein Malaysia.

Mohd Amin, Mohamad Ariff (2021) The effect of different industrialized building system (IBS) construction methods compared to the conventional method on occupational safety and health (OSH) industry risks in construction. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Kamil, Nor Amani Filzah and Roslee, Noor Faiza and Abdo Al-Khadher, Sadeq Abdullah (2021) Environment acceptability as building material from organic contaminants leaching behavior in sludge. In: Sustainable Waste Utilization in Bricks, Concrete, and Cementitious Materials. Springer, pp. 251-262. ISBN 2366-2557

Mohd Saim, Nur Amylia Izrin (2021) Risk of construction corruption factors in construction project life cycle from contractors’ perspectives. Masters thesis, Universiti Tun Hussein Malaysia.

N

Ng, Lee Shan (2021) Development of sustainable 3R-based construction waste management framework for Penang. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Nor Azlan, Nurul Nasuha (2021) Analysis of bus service based on the passenger demand using PTV Vissim: main campus of Universiti Tun Hussein Onn Malaysia, Parit Raja. Masters thesis, Universiti Tun Hussein Onn Malaysia.

S

Saaidin, Syazwi Hakimi (2021) The performance of concrete containing fine recycled concrete aggregate (FRCA) and fine crumb rubber (FCR) as partial fine aggregate replacement. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sabtu @ Othman, Hilyati (2021) A new service life prediction of reinforced concrete structures due to chloride-induced cover cracking with the confinement effect. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Shukur, Muhammad Mahathir and Hilmi Syed Mohamad, Syed Burhanuddin Hilmi (2021) Comparative study on the effectiveness of building maintenance scheduling between two multipurpose hall buildings. In: Recent Trends in Civil Engineering and Built Environment, UTHM.

Suhaini, Nurul Ashikin (2021) Investigation on construction waste management at precast concrete plants in Johor: case study. Masters thesis, Universiti Tun Hussein Malaysia.

Suhandri, Hendy Fitrian and Adil, Irdam and A. Khalifa, Nasradeen and Saptari, Asep Yusup (2021) Time scales and their characteristics. In: ROAD PAVEMENT & GEOMATIC APPLICATION: The Scenario. Penerbit UTHM, UTHM, pp. 49-62.

T

Tarique, Muhammad (2021) Relationship between significant construction safety parameters and on site safety performance of high rise building in Karachi, Sindh Province, Pakistan. Masters thesis, Universiti Tun Hussein Malaysia.