Items where Division is "Faculty of Mechanical and Manufacturing Engineering > Department of Manufacturing Engineering" and Year is 2016

A

Abd Ghani, Mohd Khairul Zaimy (2016) Relationship of moulding pressure and weigh of granulate in improving the mechanical and characteristics of biopolymer from renewable resources. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdullah, Haslina and Ramli, Rizauddin and Abd Wahab, Dzuraidah and Abu Qudeiri, Jaber (2016) Minimizing machining airtime motion with an ant colony algorithm. The International Journal of Advanced Manufacturing Technology, 10 (1). pp. 161-165. ISSN 1881-803X

Abdullah, Haslina and Ramli, Rizauddin and Abd Wahab, Dzuraidah and Abu Qudeiri, Jaber (2016) Tool path generation of contour parallel based on ant colony optimisation. Jurnal Teknologi (Sciences & Engineering), 78 (6-9). pp. 31-36. ISSN 0127-9696

Ahmad, Said (2016) Improvement of machinability and surface integrity during electro discharge machining of inconel 718 using nano powder suspension dielectric. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

B

Bala, Abduladim Salem and Wahab, Saidin and Ahmad, Mazatusziha (2016) Elements and materials improve the FDM products: a review. Advanced Engineering Forum, 16 (NIL). pp. 33-51. ISSN 2234-991X

C

Chan, Boon Loong (2016) Cold compression in direct recycling of aluminium 6061. Masters thesis, Universiti Tun Hussein Onn Malaysia.

H

Harun, Zawati and Yusof, Khairul Nazri and Yunos, Muhamad Zaini and Shohur, Muhamad Fikri and Jamalludin, Mohd Riduan (2016) Antibacterial polysulfone membranes: the effect of eugenol and zinc oxide as additives. Materials Science Forum, 867. pp. 132-138. ISSN 0255-5476

Hassan, Suhaimi and Yusof, Mohd Sallehuddin and Maksud, Mohd Idris and Nodin, Muhamad Nor (2016) A study of micro to nano structure fine solid line printing for graphene ink by micro-flexographic printing method. International Journal of Mechanical Engineering, 1. pp. 109-113. ISSN 2367-8968

I

Ibrahim, Rasidi and Rafai, Noor Hakim and Abd. Rahim, Erween and Kai, Cheng and Hui, Ding (2016) A performance of 2 dimensional ultrasonic vibration assisted milling in cutting force reduction, on aluminium AL6061. ARPN Journal of Engineering and Applied Sciences, 11 (18). pp. 11124-11128. ISSN 1819-6608

L

Lee, Te Chuan (2016) In vitro bioactivities of anodised titanium in mixtrue of B-Glycerophosphate and calcium acetate for biomedical application. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

M

Marwah, Omar Mohd Faizan (2016) Direct rapid prototyping evaluation on multijet and fused deposition modeling patterns for investment casting. Materials Design and Applications, 230 (5). ISSN 949–958

Marwah @ Omar, Omar Mohd Faizan and Mohamad, Elmy Johana and Hj Ibrahim, Mustaffa (2016) A study on palm fiber reinforces as a filament in portable FDM. ARPN Journal of Engineering and Applied Sciences, 11 (12). pp. 7828-7834. ISSN 1819-6608

Masood, Ibrahim and Abdul Rahman, Norasulaini and Abdul Halim, Siti Nur Hasrat (2016) Identification of unnatural variation in manufacturing of hard disc drive component. ARPN Journal of Engineering and Applied Sciences, 11 (10). pp. 6434-6438. ISSN 1819-6608

Masood, Ibrahim and Ali, Rasheed Majeed and Mohd Solihin, Nurul Adlihisam and Elewe, Adel Muhsin (2016) Diagnosis of bivariate process variation using an integrated mspc-ann scheme. ARPN Journal of Engineering and Applied Sciences, 11 (12). pp. 7806-7812. ISSN 1819-6608

Mat Hassan, Nik Normunira (2016) Characteristic of renewable polymer incorporated with stabilizer to characterize the endurance to ultra voilet irradiation exposure. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mat Hassan, Nik Normunira and M. Rus, A. Z. (2016) Thermal and activation energy of renewable polymer after UV irradiation. ARPN Journal of Engineering and Applied Sciences, 11 (3). pp. 1510-1514. ISSN 1819-6608

Mat Nawi, Abdullah (2016) Effect of waste plaster of Paris on physical and mechanical properties of ceramic pottery body. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamad, Elmy Johana and Ahmad, Muhammad Shukri and Marwah, Omar Mohd Faizan and Masood, Ibrahim (2016) An experimental analysis of strain and stress for abs pattern developed by portable fdm machine used in direct investment casting. ARPN Journal of Engineering and Applied Sciences, 11 (10). pp. 6496-6501. ISSN 1819-6608

O

Othaman, Muhamad Fazli and Sabudin, Sulastri and Mohideen Batcha, MohdFaizal (2016) A short review on biomass thermo chemical conversion: recent advances. International Journal of Engineering and Technology (IJET), 8 (6). pp. 2494-2499. ISSN 2319-8613

R

Ramli, M. S. and Wahab, M. S. and Ahmad, M. and Bala, A. S. (2016) FDM preparation of bio-compatible UHMWPE polymer for artificial implant. ARPN Journal of Engineering and Applied Sciences, 11 (8). pp. 5474-5480. ISSN 1819-6608

Ramly, Edly Ferdin and Mohammad, Musli and Yahya, Mohd Shahir (2016) Enablers for integrated operations diagnosis and improvement. ARPN Journal of Engineering and Applied Sciences, 11 (12). pp. 7748-7751. ISSN 1819-6608

S

S., Adzila and S., Ramesh and I., Sopyan (2016) Properties of magnesium doped nanocrystalline hydroxyapatite synthesize by mechanochemical method. ARPN Journal of Engineering and Applied Sciences, 11 (24). ISSN 1819-6608

Sazali, N. and W. Salleh, W.N. and Ismail, A.F. and M. Nordin, N.A.H. and Harun, Zawati (2016) CO2 separation through carbon tubular membranes: effect of polymer composition. Advances in Renewable Energy (ARE), 3. pp. 7-10. ISSN 1234-5678

Sulaiman, Syazwan Liyana (2016) Preparation and characterisation of poly (vinyl alcohol)/chitosan/silicon dioxide (PVA/CS/SiO2) beads for the chromium (VI) (Cr(VI) removal. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Syed Abu Bakar, Sharifah Adzila and Kanasan, Nanthini and Hassan, Mohd Fahrul and Tajul Arifin, Ahmad Mubarak and Yunos, Muhamad Zaini and Abdol Rahman, Mohd Nasrull and Abdul Haq, Reazul Haq (2016) Synthesis and characterization of magnesium doped calcium phosphatefor bone implant application. ARPN Journal of Engineering and Applied Sciences, 11 (14). pp. 8694-8697. ISSN 1819-6608

Y

Yahya, Mohd Shahir and Mohammad, Musli and Omar, Badrul and Ramly, Edly Ferdin (2016) A review on the selection of lean production tools and techniques. ARPN Journal of Engineering and Applied Sciences, 11 (2). pp. 7721-7727. ISSN 1819-6608 (Unpublished)