Items where Subject is "T Technology > TA Engineering (General). Civil engineering (General) > TA329-348 Engineering mathematics. Engineering analysis"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type
Jump to: A | B | C | F | I | K | M | N | O | R | S | T | W | Y
Number of items at this level: 31.

A

Ab Aziz, Haslinda (2003) Pembangunan sistem pangkalan data e-inventori makmal: makmal kejuruteraan awam dan makmal teknologi kejuruteraan pembinaan & alam sekitar. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abd Ghani, Mohd Khanapi and A Mostafa, Salama and Mustapha, Aida and Aman, Hannani and Mohamed, Mazin Abed and Jaber, Mustafa Musa Investigating telemedicine approaches: a 10-country comparison. International Journal of Engineering and Technology, 7 (3.2). pp. 224-234. ISSN 2227-524X

Abd Rahim, Erween and Sasahara, Hiroyuki (2017) Three dimensional finite element modeling, when drilling of Ti-6Al-4V. International Journal of Robotics and Mechatronics, 4 (1). pp. 34-38. ISSN 2288-5889

Abdul Latip, Nor Badariyah (2018) Computationally-efficient path planning algorithms in obstacle-rich environments based on visibility graph method. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Rahman, Muhammad Haleq Azhar and Mustapha, Aida and Fauzi, Rahmat and Razali, Nazim (2018) Bayesian approach to classification of football match outcome. International Journal of Integrated Engineering, 10 (6). pp. 155-158. ISSN 2229-838X

Adnan, Nur Atikah and Kandasamy, R. and Mohammad, Radiah (2017) Nanoparticle shape and thermal radiation on Marangoni Water, Ethylene Glycol and Engine Oil Based Cu, Al2O3 and SWCNTs. Journal of Material Sciences & Engineering, 6 (4). pp. 1-7. ISSN 2169-0022

Al Nasrawi, Jaafar Abdul Abbas Abbood and Roslan, Rozaini and Kandasamy, R. and Mohamad, Radiah (2018) Particle shapes on squeezing flow of carreau fluid over a sensor surface. International Journal of Mechanical Engineering and Technology (IJMET), 9 (12). ISSN 9766-359X

Amir Hamzah, Diyana Izyan and Nor, Maria Elena and Saharan, Sabariah and Mohd Hamdan, Noor Fariza and Izzati Nohamad, Nurul Asmaa (2018) Malaysia tourism demand forecasting using box-jenkins approach. International Journal of Engineering & Technology, 7 (4.3). pp. 454-457. ISSN 2227-524X

Ariffin, Ahmad Hamdan and Ahmad, Kamarul Ariffin (2020) Computational fluid dynamic (CFD) simulation of synthetic jet cooling: a review. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 72 (2). pp. 103-112. ISSN 2289-7879

B

Basri, Sri Mazzura and Mamat, Mustafa and Ghazali, Puspa Liza (2018) The sufficient descent condition of nonlinear conjugate gradient method. International Journal of Engineering & Technology, 7 (4.3). pp. 458-461. ISSN 2227-524X

C

Che Mohd Husin, Mohd Faizal (2018) A new direct viscous-inviscid interaction method for aerodynamics analysis. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Chee, Kwok Chien (2011) FSI analysis of artery suffering atherosclerosis. Masters thesis, Universiti Tun Hussein Malaysia.

F

Fulazzaky, Mohamad Ali and Khamidun, Mohd Hairul and Omar, Roslan Understanding of mass transfer resistance for the adsorption of solute onto porous material from the modified mass transfer factor models. Chemical Engineering Journal. ISSN 1385-8947

I

Ibrahim, Izzah Sofea (2018) Forecasting housing demand in Terengganu using multinomial logit. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ismail, Shuhaida and Zainal, Amy Rosshaida and Mustapha, Aida (2018) Behavioural features for mushroom classification. IEEE Symposium on Computer Applications & Industrial Electronics (ISCAIE). pp. 412-415. ISSN 9781538635278

K

Kasinathan, Vinothini and Mustapha, Aida and Fauzi, Rahmat and Che Abdul Rani, Mohamad Firdaus (2018) Questionify gamification in education. International Journal of Integrated Engineering, 10 (6). pp. 139-143. ISSN 2229-838X

Kasinathan, Vinothini and Mustapha, Aida and Hasibuan, Muhammad Azani and Zainal Abidin, Aida Zamnah (2018) First discovery augmented reality for learning solar systems. International Journal of Integrated Engineering, 10 (6). pp. 149-154. ISSN 2229-838X

Kasinathan, Vinothini and Mustapha, Aida and Nur Fajrillah, Asti Amalia and Zainal Abidin, Aida Zamnah (2018) Three-dimensional e-learning application for anatomy and physiology of brain. International Journal of Integrated Engineering, 10 (6). pp. 144-148. ISSN 2229-838X

M

Mohamad, Habib Musa (2018) Influence of post-cyclic loading on hemic peat. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mohamad, Nazeera and Che Him, Norziha and Rusiman, Mohd Saifullah and Sufahani, Suliadi and Muhammad Jamil, Siti Afiqah (2018) Application FCM in modelling DIR for Selangor using negative binomial GAM. International Journal of Engineering & Technology, 7 (4.3). pp. 1-4. ISSN 2227-524X

Mohsin, Mohamad Lokman (2018) Finite element analysis of combined fracture and delamination on coated substrate under normal and tangential loading. Masters thesis, Universiti Tun Hussein Onn Malaysia.

N

Ngali, Zamani and Jemain, Noratika Budi and Chang, An Wee and Abdol Rahman, Mohd Nasrull and Kaharuddin, Muhammad Zulhilmi and Khairu Razak, Siti Badriah (2018) Forecasting modelling of cockles in Malaysia by using time series analysis. International Journal of Engineering & Technology, 7 (4.3). pp. 488-491. ISSN 2227-524X

Nor, Maria Elena and Saharan, Sabariah and See, Lin Lok and Mohd Salleh, Rohayu and Mohd Asrah, Norhaidah (2018) Forecasting of unemployment rate in Malaysia using exponential smoothing methods. International Journal of Engineering & Technology, 7 (4.3). pp. 451-453. ISSN 2227-524X

O

Othman, Mohamad Khairi and Mohd Yaakob, Mohd Faiz and Fauzee, Mohd Sofian Omar and Zakaria, Normah and Abdullah, Shuhairimi (2022) Language of expert consensus: The indicator of student outcome according to Ibn Miskawayh’s theory using Fuzzy Delphi Technique application. Journal of Language and Linguistic Studies, 18 (1). pp. 59-79.

R

Ramly, Nurfarawahida and Rusiman, Mohd Saifullah and Che Him, Norziha and Nor, Maria Elena and Suparman, S. and Ahmad Basri, Nur Ain Zafirah and Mohamad, Nazeera (2018) A new hybrid of fuzzy c-means method and fuzzy linear regression model in predicting manufacturing income. International Journal of Engineering & Technology, 7 (4.3). pp. 473-478. ISSN 2227-524X

S

Saringat, Mohd Zainuri and Mustapha, Aida and Andeswari, Rachmadita (2018) Comparative analysis of mice protein expression clustering and classification approach. International Journal of Integrated Engineering, 10 (6). pp. 26-30. ISSN 2229-838X

Suparman, S. and Rusiman, Mohd Saifullah (2018) Bootstrap-based model selection in subset polynomial regression. International Journal of Advances in Intelligent Informatics, 4 (2). pp. 87-94. ISSN 2442-6571

Suparman, S. and Rusiman, Mohd Saifullah (2018) Hierarchical Bayesian estimation for stationary autoregressive models using reversible jump MCMC algorithm. International Journal of Engineering & Technology, 7 (4.3). pp. 64-67. ISSN 2227-524X

T

Tukimon, Mohd Faizal (2020) Thermo properties of quaternary molten salt heat transfer fluid for heat recovery system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

W

Wahir, Norsoraya Azurin and Nor, Maria Elena and Rusiman, Mohd Saifullah and G. P., Khuneswari (2018) Alternative method outlier treatments with Box-Jenkins and neural network via interpolation method. Journal of Science and Technology, 10 (2). pp. 122-127. ISSN 2600-7924

Y

Yazdani, Sepideh Foroozan and Tan, Zhiyuan and Kakavand, Mohsen and Mustapha, Aida (2018) NgramPOS a bigram-based linguistic and statistical feature process model for unstructured text classification. WIRELESS NETWORKS. pp. 1-11. ISSN 1022-0038

This list was generated on Mon Jun 27 15:30:35 2022 +08.