Items where Subject is "T Technology > TJ Mechanical engineering and machinery > TJ1040-1119 Machinery exclusive of prime movers"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type
Jump to: A | D | E | I | J | K | L | M | P | S | T | Y
Number of items at this level: 23.


Ahmad, R (2018) The effect of chromium addition on fluidity, microstructure and mechanical properties of aluminum lm6 cast alloy. International Journal of Material Science and Research, 1 (1). pp. 32-35. ISSN 2638-1559

Ahmad, Said and Lajis, Mohd Amri and Abdul Haq, Reazul Haq and Tajul Arifin, Ahmad Mubarak and Abdol Rahman, Mohd Nasrull and Ho, Fu Haw and Abdullah, Haslina and Hassan, Mohd Fahrul (2018) Surface roughness and surface topography of inconel 718 in powder mixed dielectric electrical discharge machining (PMEDM). International Journal of Integrated Engineering: Special issue 2018: Mechanical Engineering, 10 (5). pp. 181-186. ISSN 2229-838X

Amiril, S.A.S. and Rahim, E.A. and Embong, Z. and Syahrullail, S. (2018) Tribological investigations on the application of oil-miscible ionic liquids additives in modified Jatropha-based metalworking fluid. Tribology International, 120. pp. 520-534. ISSN 0301-679X

Andsaler, Adiba Rhaodah and Khalid, Amir and Jaat, Norrizam (2017) Simulation and modeling of mixture formation under variant ambient condition and injection pressure of biodiesel spray. International Journal of Integrated Engineering, 9 (3). pp. 18-23. ISSN 2229-838X


Damanhuri, A A M and Subki, A S A and Hariri, A and Tee, B T and Fauadi, M H F M and Hussin, M S F and Mustafa, M S S (2019) Comparative study of selected indoor concentration from selective laser sintering process using virgin and recycled polyamide nylon (pa12). In: 2019 Theory & Technique International Aerosol Conference and Malaysia Air Quality Annual Symposium (T&T IAC and MAQAS), 7 - 8 August 2019, Balik Pulau Hotel, Malacca, Malaysia. (Submitted)

Dorairaju, Hemarani (2015) Investigation of cutting temperature and cutting force from mist flow pattern in MQL technique. Masters thesis, Universiti Tun Hussein Onn Malaysia.


Ee, Soong Low and Pauline, Ong and Cheng, Yee Low (2018) Mobile robot path planning using q-learning with guided Distance. International Journal of Engineering & Technology, 7 (4.27). pp. 57-62. ISSN 2227-524X


Ibrahim, Rasidi and Rafai, Noor Hakim and Abd. Rahim, Erween and Kai, Cheng and Hui, Ding (2016) A performance of 2 dimensional ultrasonic vibration assisted milling in cutting force reduction, on aluminium AL6061. ARPN Journal of Engineering and Applied Sciences, 11 (18). pp. 11124-11128. ISSN 1819-6608

Ishak, Maizul (2006) Development of online speed trap system (DOSTS). Masters thesis, Universiti Teknologi Malaysia.


Jamaluddin, N. A. and Talib, N. and A. Sani, A. S. (2021) Experimental analysis of tribological performance of modified jatropha oil enriched with nanoparticle additives for machining application. In: Proceedings of Green Design and Manufacture 2020, 23–24 July 2020, Arau, Malaysia.

Johar, Muhammad Akmal (2007) Design and development of a brake system using smart materials. Masters thesis, University of Applied Science Ravensburg-Weingraten.


Kamaludin, Hazalila and Jamal, Muhamad Yusmaleef and Ab Rahman, Nurul Hidayah and Mohd Safar, Noor Zuraidin and Abd Ishak, Suhaimi (2019) Implementing virtual machine:a performance evaluation. In: International Conference on Soft Computing and Data Mining, 22-23 January, Langkawi, Malaysia.


Lee, W.K. and Ratnam, M.M. and Ahmad, Z.A. (2016) Detection of fracture in ceramic cutting tools from workpiece profile signature using image processing and fast Fourier transform. Precision Engineering, 44. pp. 131-142. ISSN 0141-6359


M. Tahir, A. F. and Rashid, A. R. and Sariff, N. E. and A. Rahim, E. (2020) CO2 laser cutting performance on ultra high strength steel (UHSS). Lasers in Manufacturing and Materials Processing, 7. pp. 15-37. ISSN 2196-7229

Mahamad, Abd Kadir (2005) Monitoring and prediction of bearing failure by acoustic emission and neural network. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mohd Amin, Azriszul (2007) Analysis of temperature distribution in disc brakes. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Muniandy, Nagentrau (2021) Delamination-fretting wear failure evaluation at HAp-Ti-6Al-4V interface of artificial hip implant. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.


Pauline, Ong and Chon, Haow Chong and Rahim, Mohammad Zulafif and Woon, Kiow Lee and Chee, Kiong Sia and Ahmad, Muhammad Ariff Haikal (2018) Intelligent approach for process modelling and optimization on electrical discharge machining of polycrystalline diamond. Journal of Intelligent Manufacturing, 31. pp. 227-247. ISSN 1572-8145


Sapian, Nik Fazli (2012) Design of pulse jet coolant delivery system for minimal quantity lubricant (IP MQL) operation. Masters thesis, Universiti Tun Hussein Malaysia.


Talib, N. and Rahim, E.A. (2018) Experimental evaluation of physicochemical properties and tapping torque of hexagonal boron nitride in modified jatropha oils-based as sustainable metalworking fluids. Journal of Cleaner Production, 171. pp. 743-755. ISSN 0959-6526

Talib, N. and Rahim, E.A. (2018) Performance of modified jatropha oil in combination with hexagonal boron nitride particles as a bio-based lubricant for green machining. Tribology International, 118. pp. 89-104. ISSN 0301-679X


Yaacob, Zaihar (2005) Successive over relaxation technique for steady state and dynamic characteristics of a cylindrical bore bearing. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Yusof, Mohd Khairul Azhar (2014) Amalan keselamatan bengkel dalam kalangan pelajar Kolej Vokasional Temerloh. Masters thesis, Universiti Tun Hussein Malaysia.

This list was generated on Fri Dec 1 12:28:42 2023 +08.