Items where Subject is "T Technology > TJ Mechanical engineering and machinery > TJ751-805 Miscellaneous motors and engines Including gas, gasoline, diesel engines"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type
Number of items at this level: 37.

Article

Aminnuddin, Hazim Fadli and Abdullah, Mohammad Kamil (2017) Numerical investigation on pitch distance, compound angle and turbulence intensity of double cylindrical film cooling hole geometry. ARPN Journal of Engineering and Applied Sciences, 12 (8). pp. 2503-2508. ISSN 1819-6608

Amirnordin, Shahrin Hisham and Khalid, Amir and Suardi, Mirnah and Manshoor, Bukhari and Hushim, M F (2017) Effects of fractal grid on spray characteristics and flame development in burner combustion. Journal of Physics: Conference Series, 822 (1). pp. 1-5. ISSN 1742-6588

Anas, Mohd Irham and Khalid, Amir and Zulkifli, Fathul Hakim and Jaat, Norrizam and Hushim, Mohd Faisal and Manshoor, Bukhari and Zaman, Izzuddin (2017) Analysis of the effect of injection pressure on ignition delay and combustion process of biodiesel from palm oil, algae and waste cooking oil. Journal of Physics: Conference Series, 914 (1). pp. 1-7. ISSN 1742-6588

Andsaler, Adiba Rhaodah and Khalid, Amir and Abdullah, Nor Sharifhatul Adila and Sapit, Azwan and Jaat, Norrizam (2017) The effect of nozzle diameter, injection pressure and ambient temperature on spray characteristics in diesel engine. Journal of Physics: Conference Series, 822 (NIL). pp. 1-7. ISSN 1742-6588

Dominic Laja Munggau, Dominic Laja Munggau and Djamal Hissein Didane, Djamal Hissein Didane and Sami Al-Alimi, Sami Al-Alimi and Yazid Abdullsameea Mohammed Saif, Yazid Abdullsameea Mohammed Saif and Bukhari Manshoor, Bukhari Manshoor (2023) Computational Study on the Influence of Duct on The Performance of Darrieus Hydro-Turbine. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 105 (1). pp. 210-219. ISSN 2289-7879

Ismail, M. M. and Fawzi, M. and Zulkifli, F. H. and Osman, S. A. (2018) Effects of fuel ratio on performance and emission of diesel-compressed natural gas (CNG) dual fuel engine. Journal of the Society of Automotive Engineers Malaysia, 2 (2). pp. 157-165. ISSN 2600-8092

Ismail, Muammar Mukhsin and Mas, Fawzi and Theerayut, Leevijit and Zulkifli, Fathul Hakim and Osman, Shahrul Azmir and Taweekun, Juntakan (2020) Energy consumption and emissions of diesel-CNG dual fuel engine at high load operation. The International Journal of Integrated Engineering, 12 (2). pp. 253-260. ISSN 2229-838X

K., Adam and A. Wahid, M. (2021) On the effects of tangential air inlets distribution configurations to the combustion characteristics of a direct injection liquid fueled Swirl Flameless Combustor (SFC). EVERGREEN Joint Journal of Novel Carbon Resource Sciences & Green Asia Strategy, 8 (1). pp. 117-122.

Khalid, Amir and Nursal, Ridwan Saputra and Jacob, Deden Witarsyah and Jaat, Norrizam and Mohamed Sunar, Norshuhaila and Amirnordin, Shahrin Hisham (2018) Effect of ambient temperature on ignition delay, combustion process and emission of biodiesel derived from algae. The International Journal of Integrated Engineering, 10 (4). pp. 43-48. ISSN 2229-838X

Kidoguchi, Yoshiyuki and Nada, Yuzuru and Yano, Takayuki and Nakagiri, Misato (2013) Analysis of a high pressure diesel spray at high pressure and temperature environment conditions. Transactions of The Japan Society of Mechanical Engineers Series B, 79 (799). pp. 172-178. ISSN 0387-5016

Mahadi, Lina Farhana and Ibrahim, Nabilah and Zaluwi, Mohd Thariq and S.M Johan, Muhammad Haniff (2019) Performance evaluation on mitral valve motion feature tracking using Kanade-Lucas- Tomasi (KLT) algorithm based eigenvalue measurement. Advances in Electrical and Electronic Engineering: From Theory to Applications (Series 2), 2. pp. 1-10.

Meng, Choung Chiong and Cheng, Tung Chong and Jo, Han Ng and Syed Mashruk, Syed Mashruk and Fong Chong, William Woei and Samiran, Nor Afzanizam and Guo, Ren Mong and Medina, Agustin Valera (2021) Advancements of combustion technologies in the ammonia-fuelled engines. Energy Conversion and Management, 244. pp. 1-17. ISSN 0196-8904

Mohamad, Marlina and Mazin, Khairol Azwar (2016) Pembangunan e-modul pembelajaran enjin diesel untuk kursus teknologi automotif. Online Journal For TVET Practitioners, 7 (1). pp. 1-10. ISSN 22897410

Mohammed, Akmal Nizam and Razali, Mohd Azahari and Sapit, Azwan and Hushim, Mohd Faisal and Osman, Shahrul Azmir and A. Rahman, Mohamad Farid (2017) Numerical study of variable length exhaust pipe in small engine. ARPN Journal of Engineering and Applied Sciences, 12 (7). pp. 2374-2379. ISSN 1819-6608

Mohd Azman Abasa, Mohd Azman Abasa and Srithar Rajooa, Srithar Rajooa and Zainal Abidin, Shaiful Fadzil (2018) Development of Malaysian urban drive cycle using vehicle and engine parameters. Transportation Research Part D, D (63). pp. 388-403.

Nanihar, Nadiarulah and Khalid, Amir and Mustaffa, Norrizal and Jaat, Norrizam and Sapit, Azwan and Razali, Azahari and Mohamed Sunar, Norshuhaila (2017) Experiment on the effects of storage duration of biodiesel produced from crude palm oil, waste cooking oil and Jatropha. Journal of Physics: Conference Series, 914 (1). pp. 1-8. ISSN 1742-6588

Nasir, N. F. and W. Daud, W. R. and Kamarudin, S. K. and Yaakob, Z. (2014) Methyl esters selectivity of transesterification reaction with homogenous alkaline catalyst to produce biodiesel in batch, plug flow, and continuous stirred tank reactors. International Journal of Chemical Engineering, 2014 (931264). pp. 1-13. ISSN 1687-806X

Nasir, N.F. and W. Daud, W.R. and Kamarudin, S.K. and Yaakob, Z. (2013) Process system engineering in biodiesel production: a review. Renewable and Sustainable Energy Reviews, 22. pp. 631-639. ISSN 1364-0321

Samiran, N. A. and Mohd Jaafar, Mohammad Nazri and Ng, Jo-Han and Shiung, Lam Su and Tung, Chong Cheng (2016) Progress in biomass gasification technique – with focus on Malaysian palm biomass for syngas production. RENEWABLE & SUSTAINABLE ENERGY REVIEWS, 62. pp. 1047-1062. ISSN 1364-0321

Samiran, N. A. and Ng, Jo-Han and Mohd Jaafar, Mohammad Nazri and Valera-Medinad, Agustin and Tung, Chong Cheng (2017) Swirl stability and emission characteristics of CO-enriched syngas/air flame in a premixed swirl burner. PROCESS SAFETY AND ENVIRONMENTAL PROTECTION, 112. pp. 315-326. ISSN 0957-5820

Samiran, N. A. and Ng, Jo-Han and Mohd Jaafar, Mohammad Nazri and ValeraMedina, Agustin and Tung, Chong Cheng (2016) H2-rich syngas strategy to reduce NOx and CO emissions and improve stability limits under premixed swirl combustion mode. International Journal of Hydrogen Energy, 41 (42). pp. 19243-19255. ISSN 0360-3199

Sapit, Azwan and Razali, Mohd Azahari and Hushim, Mohd Faisal and Jaat, Norrizam and Mohammad, Akmal Nizam and Khalid, Amir (2017) Comparision on dynamic behavior of diesel spray and rapeseed oil spray in diesel engine. Journal of Physics: Conference Series, 822 (1). pp. 1-7. ISSN 1742-6588

Suksuwan, Wasu and Mohideen Batcha, Mohd Faizal and Palamanit, Arkom and Wae-hayee, Makatar (2021) The effect of Biomass Shapes on combustion characteristic in updraft chamber. International Journal of Integrated Engineering (IJIE), 13 (4). pp. 163-171. ISSN 2229-838X

Sulong, Nurulsaidatulsyida and Mohd Rus, Anika Zafiah and Mat Hassan, Nik Normunira and Marsi, Noraini (2018) Spectroscopic studies of oils and its synthesized bio-polymer. Journal of Mechanical Engineering, 5 (3). pp. 50-60. ISSN 1823- 5514

Tukiman, Mohd Mustaqim and Osman, S.A. and Fawzi, Mas and Mustaffa, Norrizal and Madon, Rais Hanizam (2018) Effect of performance and exhaust emission using liquid phase LPG sequential injection as an alternative fuel in spark ignition engine. International Journal of Integrated Engineering, 10 (8). pp. 223-230. ISSN 2229-838X

Zahari, I. and Abas, M. A. and Mat Arishad, N. I. and Zainal Abidin, S. F. and Muhamad Said, M. F. (2013) Experimental study to identify common engine part load conditions between Malaysian city driving and NEDC test. International Review of Mechanical Engineering (I.RE.M.E.), 7 (6).

Zainal Abidin, S. F. and Muhamad Said, M. F. and Abdul Latiff, Z. and Zahari, I. and Said, M. (2015) The study of the effect of intake valve timing on engine using cylinder deactivation technique via simulation. Jurnal Teknologi (Sciences & Engineering), 77 (8). pp. 107-111. ISSN 2180–3722

Book Section

Ithsan, Mohammad Zaki and Abu Bakar, Muhammad Azman and Khalid, Amir and Zainal Abidin, Shaiful Fadzil and Manshoor, Bukhari (2020) Engine performance characteristics and evaluation of variation in the length of intake plenum. In: Fuel, Automotive and Engine Technology. Penerbit UTHM, pp. 1-8. ISBN 978-967-2916-32-1

Thesis

Abdulguad, Osama. H. (2014) Aerodynamic comparison and validation of rans, K-ω, standard K-ɛ and URANS simulations of flat plate film-cooling. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abu Zarida, Abdallah Ali (2015) Investigation of film cooling effectiveness from cylindrical cooling hole with anti vortex generator by numerical simulation. Masters thesis, UTHM.

Aminnuddin, Mohd Hazim Fadli (2017) Simulation and experimental study of double holes film cooling. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hassan, Haswira (2016) Experimental and simulation study on the effect of geometrical and flow parameters for combined-hole film cooling. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamed Zarti, Almehdi (2012) Gas turbine performence based creep life estimation using soft computing technique. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Muhsein Taib, Mohd Muhsein (2012) Experimental investigation on the feasibility and durability of a novel diesel particulate filter. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mustaffa, Norrizal (2019) Combustion characteristics of a spark ignition engine operating with liquid lpg injection. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Suffian, Mohamad Mokhsen (2014) Performance and emissions of compression ignition engine fueled with preheated blend of vegetable oil. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Other

Thawaba, Abdulaziz Ahmed and Ramli, Azizul Azhar and Md. Fudzee, Mohd. Farhan (2021) PM-ISD traceability metrics enhance reliability assessment for safety-critical systems development processes: a case study of oil and gas well drilling project. IEEE.

This list was generated on Thu Mar 28 20:30:16 2024 +08.