Items where Subject is "T Technology > TJ Mechanical engineering and machinery > TJ807-830 Renewable energy sources"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type
Jump to: A | B | C | D | G | H | J | L | M | N | O | R | S | T
Number of items at this level: 38.

A

Abbas, Mohammed Saad and Azwan, Sapit and Baqer, Nawfel M. and Balla, ,Hyder H. and Hayder, Ali Mohammed (2019) Performance assessment of parabolic trough collector (ptc) by using three passes receiver for preheating the fuel oil under Iraq climate for different mass flow rates. International Journal of Mechanical & Mechatronics Engineering, 19 (5). pp. 132-141.

Abbas, Mohammed Saad and Sapit, Azwan and Balla, Hyder Hassan Abd and Haider, Ali Mohammed and Al-Shamani, Ali Najah (2018) A review study on the effect of glass envelope, working fluid and geometry contributions for the receiver on performance of parabolic trough collector (PTC). ARPN Journal of Engineering and Applied Sciences, 13 (20). pp. 8200-8211. ISSN 1819-6608

Abdul Ridha, Salih Meri (2019) Experimental and simulation analysis for performance enhancement of elliptical savonius wind turbine by modifying blade shapes. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Abdullah Alhamzi, Belal Mohammed (2014) A study of energy scavenging strategy in a tapping tree power. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmed Abdulle, Yahye (2021) Sizing and analysis of a stand-alone photovoltaic and wind system. Masters thesis, Universiti Tun Hussein Malaysia.

Amiril, S.A.S. and Rahim, E.A. and Syahrullail, S. (2017) A review on ionic liquids as sustainable lubricants in manufacturing and engineering: recent research, performance, and applications. Journal of Cleaner Production, 168. pp. 1571-1589. ISSN 0959-6526

Amirnudin, Amirul Adlan and Mustafa, Farahiyah and Mohd Asry, Anis Maisarah and Yi, Sy Sim (2017) Vibration based energy harvesting interface circuit using diode-capacitor topologies for low power applications. International Journal of Power Electronics and Drive System (IJPEDS), 8 (4). pp. 1943-1947. ISSN 2088-8694

Azhar, Afif Aiman and Md Shahran, Mohamad Azam and Arifin, Mohamad Nurhakeem and Yahaya, Izat and Abdul Rahim, Ruzairi and Pusppanathan, Jaysuman (2018) Pocket-hydro turbine into capsule hydro turbine. Journal of Tomography System & Sensors Application, 1 (1). pp. 1-6. ISSN 2636-9133

B

Bohari, Azuwien Aida (2021) Advance control of Dual Active Bridge Multilevel Inverter (DABMI) with Open Winding Transformer (OWT) model. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

C

Chandran, Yutheish and Didane, Djamal Hissein and , Mohammed Ogab, Mohammed (2021) Assessment of wind energy potential at Gong Kedak and Pantai Chendering, Malaysia. Journal of Design for Sustainable and Environment, 3 (1). pp. 1-7.

D

Didane, Djamal Hissein (2017) Experimental and simulation study on the aerodynamic performance of a counter rotating vertical axis wind turbine. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Didane, Djamal Hissein and Rosly, Nurhayati and Zulkafli, Mohd Fadhli and Shamsudin, Syariful Syafiq (2017) Evaluation of wind energy potential as a power generation source in chad. International Journal of Rotating Machinery, 2017 (312187). pp. 1-10. ISSN 1023-621X

G

Gopalakrishnan, Yashni (2021) Solar photocatalytic degradation of basic red 51 in hair dye bathroom greywater using zinc oxide nanoparticles synthesized with Corriandrum sativum leaf extract. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

H

Hamdan, A. and Mustapha, F. and Ahmad, K. A. and Mohd Rafie, A. S. and Ismail, Al Emran (2016) The bonded macro fiber composite (MFC) and woven kenaf effect analyses on the micro energy harvester performance of kenaf plate using modal testing and Taguchi method. Journal of Vibroengineering, 18 (2). pp. 699-716. ISSN 1392-8716

Hayder, Ali Mohammed (2019) Thermal performance of backflow solar air heating with integrated nanoparticle enhanced pcm absorber storage system. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Hayder, Ali Mohammed and Sapit, Azwan and Abed, Qahtan Adnan (2017) Review of solar thermal storage techniques. ARPN Journal of Engineering and Applied Sciences, 12 (21). pp. 6103-6119. ISSN 1819-6608

Hussein Abed, Abo Alwez Mustafa (2019) Modeling and simulation of standalone hybrid PV-wind renewable energy system base case study: Iraq. Masters thesis, Universiti Tun Hussein Onn Malaysia.

J

Jabbar Al-Quraishi, Balasem Abdulameer and Asmuin, Nor Zelawati and Nasir, Nurul Fitriah and Abdul Latif, Noradila and Taweekun, Juntakan and Mohd, Sofian and Mohammed, Akmal Nizam and Al-Wahid, Wisam A. Abd (2019) CFD investigation of empty flanged diffuser augmented wind turbine. The International Journal of Integrated Engineering, 11 (10). pp. 22-32. ISSN 2229-838X

Jama, Amar Abdi (2021) Analysing small scale distribution generation PV and wind system in islanded mode. Masters thesis, Universiti Tun Hussein Malaysia.

Jamit, Rexca (2014) An evaluation of aerodynamics performance of a moving car with wind turbine system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

L

Lee, Ming Foong and Mohd Zain, M.N.N. and Chee, Sern Lai (2018) Lighting system design using green energy from living plants. Journal of Physics: Conference Series, 1019 (NIL). pp. 1-8. ISSN 1742-6596

M

M. Saad, Magedi Moh and Mohd, Sofian and Zulkafli, Mohd Fadhli (2018) Power generation of small wind turbine: Under high-speed operation. Sustainable Energy Technologies and Assessments, 26. pp. 1-5. ISSN 2213-1388

Marwah @ Omar, Omar Mohd Faizan and Mohamad, Elmy Johana and Hj Ibrahim, Mustaffa (2016) A study on palm fiber reinforces as a filament in portable FDM. ARPN Journal of Engineering and Applied Sciences, 11 (12). pp. 7828-7834. ISSN 1819-6608

Mat Jamil, Khamelrun Shah (2015) Development of portable solar generator. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Meng, Choung Chiong and Cheng, Tung Chong and Jo, Han Ng and Syed Mashruk, Syed Mashruk and Fong Chong, William Woei and Samiran, Nor Afzanizam and Guo, Ren Mong and Medina, Agustin Valera (2021) Advancements of combustion technologies in the ammonia-fuelled engines. Energy Conversion and Management, 244. pp. 1-17. ISSN 0196-8904

Mohamad, Elmy Johana and Marwah, Omar Mohd Faizan and R.A, Rahim and M.H.F., Rahiman and H.L.M., Ameran and Y.A., Wahab (2016) Analysis of crude palm oil composition in a chemical process conveyor using Electrical Capacitance Tomography. Flow Measurement and Instrumentation, 50. pp. 57-64. ISSN 0955-5986

Mohd, Sofian (2006) Dynamic analysis of A 10M diameter wind turbine rotor under maximum wind load of Malaysia. Masters thesis, Universiti Teknologi Malaysia.

Mohd, Sofian (2006) Dynamic analysis of a 10m diameter wind turbine rotor under maximum wind load of Malaysia. Masters thesis, Universiti Teknologi Malaysia.

Mohd Asry, Anis Maisarah and Mustafa, Farahiyah and Ahmad, Aznizam and Sim, Sy Yi and Sahari, Norain (2020) Bending mechanism for piezoelectric transducer. International Journal of Advanced Trends in Computer Science and Engineering, 1 (4). pp. 374-377. ISSN 2278-3091

Mustaza, M. S. A. and M. Ariff, M. A. and Ramli, Sofia Najwa (2019) An extensive review of energy storage system for the residential renewable energy system. Indonesian Journal of Electrical Engineering and Computer Science, 14 (2). pp. 2501-4752. ISSN 2502-4752

N

Noranai, Zamri and Mohd Joharudin, Nurul Farahin and Redzwan, Muhammad Aliff Asyraf and Abdul Latif, Noradila and Hassan, Nur Zaha (2021) Improving energy efficiency at palm oil mill industries. In: 241st ECS Meeting, May 29- June 2 2022, Canada.

O

Osman, Mustafe Adam (2018) Fesibility study of renewable energy-based microgrid hybrid system in Berbera Somaliland. Masters thesis, Universiti Tun Hussein Onn Malaysia.

R

Ramasamy, Chandrashekar and Mohan, Kanchana and Shamsuddin, Alina (2018) A foresight study on green technology in paint industries in Malaysia. Advanced Science Letters, 24 (6). pp. 4588-4593. ISSN 1936-6612

Roslan, M. Nazrul and Yahya, M. Yazid and Ahmad, Z. and A.R., Azrin Hani (2018) Energy absorption behaviour of braided basalt composite tube. Advanced Composite Materials, 27 (5). pp. 467-481. ISSN 0924-3046

Roslee, Darbi and Sabudin, Sulastri and Noor Ariffin, Nadhirah Aqilah and Jamari, Fathin Nadhirah and Mohideen Batcha, Mohd Faizal (2018) Design and development of downdraft gasifier to generate producer gas. The International Journal of Integrated Engineering, 10 (5). pp. 148-155. ISSN 2229-838X

S

Samsudin, Muhammad Zahid and Didane, Djamal Hissein and Elshayeb, Said A. and Manshoor, Bukhari (2021) Assessment of solar energy potential in Johor, Malaysia. Journal of Design for Sustainable and Environment, 3 (1). pp. 1-6.

Seng, Sue Men (2011) Location theory based wind energy system planning. Masters thesis, Universiti Tun Hussein Onn Malaysia.

T

Teng, Howe Cheng (2020) Modelling of pandanus amaryllifolius plant-microbial fuel cell as low power generation source with energy yield enhancement. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

This list was generated on Fri Mar 29 15:12:05 2024 +08.