Items where Subject is "T Technology > TL Motor vehicles. Aeronautics. Astronautics > TL1-484 Motor vehicles. Cycles"

Article

Ahmad Termida, Nursitihazlin and Susilo, Yusak O. and Franklin, Joel P. (2016) Observing dynamic behavioural responses due to the extension of a tram line by using panel survey. Transportation Research Part A, 86. pp. 78-95. ISSN 0965-8564

Alkubati, M.A. and A. Khalifa, Nasradeen and Al-barakani, Hareth A. (2023) An overview of public transport reliability studies using a bibliometric analysis. Ain Shams Engineering Journal, 14. pp. 1-13.

Ambak, Kamarudin and Ismail, Rozmi and Rahmat, Riza Atiq Ok and Shokri, Foad (2011) Do Malaysian motorcyclists concern to safety helmet usage: a cross-sectional survey. Journal of Applied Sciences, 11 (3). pp. 555-560. ISSN 1812-5654

Ellena, Thierry and Skals, Sebastian and Subic, Aleksandar and Mustafa, Helmy and Toh, Yen Pang (2017) 3D digital headform models of Australian cyclists. Applied Ergonomics, 59. pp. 11-18. ISSN 0003-6870

Ellena, Thierry and Subic, Aleksandar and Mustafa, Helmy and Toh, Yen Pang (2016) The helmet fit index - an intelligent tool for fit assessment and design customization. Applied Ergonomics, 55. pp. 194-207. ISSN 0003-6870

Mohd Ab Halim, Mohd Firdaus and Sulaiman, Erwan and Jenal, Mahyuzie and Raja Othman, Raja Nor Firdaus Kashfi and Syed Othman, Syed Muhammad Naufal (2022) Preliminary analysis of eddy current and iron loss in magnetic gear in electric vehicle. International Journal of Electrical and Computer Engineering (IJECE), 12 (2). pp. 1161-1167. ISSN 2088-8708

Mohd Azman Abasa, Mohd Azman Abasa and Srithar Rajooa, Srithar Rajooa and Zainal Abidin, Shaiful Fadzil (2018) Development of Malaysian urban drive cycle using vehicle and engine parameters. Transportation Research Part D, D (63). pp. 388-403.

Prasetijo, Joewono and Mohd Jawi, Z. and Johari, M. H. and Mustafa, M. A. and Zhang, G. and Ramli, M. F. and Zulkifli, A. F. H. and Hamid, A. (2020) Visual performance and motorcycle safety-related impacts of various high beam headlight intensities. Journal of the Society of Automotive Engineers Malaysia, 4 (1). pp. 35-43. ISSN 2600-8092

Raja Mamat, Tengku Nur Azila and Mat Saman, Muhamad Zameri and Sharif, Safian (2015) A survey instrument design to determine the success factors in implementing the end-of-life vehicles (ELVs) management system in Malaysia. Advanced Materials Research, 1125. pp. 620-624. ISSN 1662-8985

Skals, Sebastian and Ellena, Thierry and Subic, Aleksandar and Mustafa, Helmy and Toh, Yen Pang (2016) Improving fit of bicycle helmet liners using 3D anthropometric data. International Journal of Industrial Ergonomics, 55. pp. 86-95. ISSN 0169-8141

Zulkifli, Abd Fathul Hakim and Mohd Ali, Mas Fawzi and Anwar Syahmi Adlin Zafrulan, Anwar Syahmi Adlin Zafrulan and Osman, Shahrul Azmir and Abd Jalal, MZahar and Harrison Lau, Harrison Lau (2024) Performance and Emissions Characteristics of Vehicle Fuelled with Blended Palm Biodiesel Before and After Engine Overhaul. Journal of Advanced Research in Applied Sciences and Engineering Technology, 114 (2). pp. 188-195. ISSN 2289-7879

Zulkifli Jasmin, Zahir Fikri Bin and Azlis-Sani, Jalil and Md Rohani, Munzilah and Abd Hamid, Nor Aziati and Sabri, S. M. and Ismail, S. M. and Ahmad Tajedi, Noor Aqilah and Abd Aziz, Roseni and Md Zein, Raemy (2016) Physical fatigue assessment for intrastate bus driver. ARPN Journal of Engineering and Applied Sciences, 11 (18). pp. 11170-11177. ISSN 1819-6608

Book Section

Abu Bakar, Muhammad Amirul Firdaus and Nadarajan, Arjunan and Khalid, Amir and Azizul, Muhamad Asri and Mohamed, Norirda and Mahmudin, Rahmah (2020) Simulation and modeling of the behavior in the four-stroke spark ignition engine by using CFD simulation. In: Fuel, Automotive and Engine Technology. Penerbit UTHM, pp. 95-100. ISBN 978-967-2916-32-1

Azhar, Muhammad Izzudin and Mohd Fazri, Azrul Fadzli and Khalid, Amir and Azizul, Muhamad Asri and Darlis, Nofrizalidris (2020) Research on the ultra-low emission technology in internal combustion engine. In: Fuel, Automotive and Engine Technology. Penerbit UTHM, pp. 73-82. ISBN 978-967-2916-32-1

Hakim, Mohd Ikmal and Fikrie, Mohamad and Hanis, Nur Zulaika and Khalid, Amir and Zaman, Izzuddin (2020) Effect of bio-degradable lubricating in the lubricant system of ICE engine. In: Fuel, Automotive and Engine Technology. Penerbit UTHM, pp. 43-50. ISBN 978-967-2916-32-1

Ithsan, Mohammad Zaki and Abu Bakar, Muhammad Azman and Khalid, Amir and Zainal Abidin, Shaiful Fadzil and Manshoor, Bukhari (2020) Engine performance characteristics and evaluation of variation in the length of intake plenum. In: Fuel, Automotive and Engine Technology. Penerbit UTHM, pp. 1-8. ISBN 978-967-2916-32-1

Kori, M. I. and Osman, K. and Khudzari, A. Z. M. and Taib, I. (2020) Computational fluid dynamics application in reducing complications of patent ductus arteriosus stenting. In: Cardiovascular Engineering : Technological Advancements, Reviews, and Applications. Springer Singapore, pp. 201-218. ISBN 978-981-10-8404-1

Maskan, Muhammad Haziq and Mohamad Yusuf, Mohamad Wafi and Khalid, Amir and Ishak, Izuan Amin and Zaman, Izzuddin and Sapit, Azwan (2017) Discussion of the technology and research in fuel injectors common rail system. In: Fuel, Automotive and Engine Technology. Penerbit UTHM, pp. 9-22. ISBN 978-967-2916-32-1

Mohd Badli, Muhammad Faizul Amri and Vicknasparran, Adam Nasuha and Khalid, Amir and Mustaffa, Norrizal and Ngadiron, Zuraidah and Mohamed Sunar, Norshuhaila (2020) Modern biomass-based transportation fuels from pyrolysis process, bio-ethanol, bio-methanol and bio-diesel. In: Fuel, Automotive and Engine Technology. Penerbit UTHM, pp. 51-62. ISBN 978-967-2916-32-1

Mohd Rodzi, Siti Nur Aizierah and Zanalli, Sophia and Khalid, Amir and Manshoor, Bukhari and Ngadiron, Zuraidah (2020) Evolution engine technology in exhaust gas recirculation for heavy-duty diesel engine. In: Fuel, Automotive and Engine Technology. Penerbit UTHM, pp. 31-42. ISBN 978-967-2916-32-1

Zainal, Helmi Faidzi and Vico Francis, Brandon and Khalid, Amir and Hushim, Mohd Faisal and Ngadiron, Zuraidah (2020) Research on mixture motion and combustion chamber of internal combustion engine. In: Fuel, Automotive and Engine Technology. Penerbit UTHM, pp. 83-94. ISBN 978-967-2916-32-1

Zainal, Rabi’atulawwaliah and Saiful Azam, Syafiqah Ruqaiyah and Khalid, Amir and Jaat, Norrizam and Amirnordin, Shahrin Hisham (2020) Identifying of the fuel-air mixing, mixture formation, ignition and combustion characteristic in the combustion chamber. In: Fuel, Automotive and Engine Technology. Penerbit UTHM, pp. 63-72. ISBN 978-967-2916-32-1

Zulhazmi, Ammar Naim and Azlan, Adi Maisur Aflah and Khalid, Amir and Mustaffa, Norrizal and Sulaiman, Syabillah and Razali, Azahari (2020) Effect of bio fuel on performance and emissions of spark ignition and compression ignition engines by running on a variety of bio-fuels. In: Fuel, Automotive and Engine Technology. Penerbit UTHM, pp. 23-30. ISBN 978-967-2916-32-1

Conference or Workshop Item

Lukeman, Nur Izzah and Nasir, Siti Hana and El Bakri, Helmy Mustafa (2020) The fit of safety helmet among female. In: Progress in Engineering Application and Technology, 22 Jun 2021, UTHM. (Submitted)

Mohd Norzam, Muhammad Nur Aliff and Karjanto, Juffrizal and Md. Yusof, Nidzamuddin and Hassan, Muhammad Zahir and Zulkifli, Abd Fathul Hakim and Mohd Jawi, Zulhaidi and Ab. Rashid, Ahmad Azad and Abu Kassim, Khairil Anwar (2024) Effects of ride comfort on different non-driving related activities in fully automated driving experience. In: AIP Conference Proceedings.

Z., Embong and S., Shahudin and S., Hassan and M. S., Yusof and S., Mahzan and S., Shamsuddin and N. K., Othman and M. A. A., Mohd Salleh (2021) A study of geo-polymer as alternative material in automotive brake pad. In: AIP Conference Proceedings.

Thesis

A.Hamid, Isredza Rahmi (2005) Comparative study on RFID, hotspot and car plate scanning method : for intelligent parking management system. Masters thesis, Universiti Teknologi MARA.

Ab Ghafar, Fauzi (2015) Driving cycle for small and medium duty engine case study of Ipoh. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul, Mohd Rizan (2015) Performance study on the effect of different exhaust length for motorcycle engine. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Rahman, Abdul Rashid (2016) Friction material (metal reinforcement) analysis of brake pad for light rail train system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ameen, Hussein Ali (2021) Real time collision warning system in the context of vehicle-to-vehicle data exchange based on drivings behaviours analysis. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Amir, Ahmad Irsyaduddin (2016) Pengaruh pemanduan bas rapid terhadap penggunaan bahan bakar. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Amirnordin, Shahrin Hisham (2009) Computational fluid dynamics (CFD) analysis for a catalytic converter design. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Awang, Muhamad Khairudin (2004) Prediction of noise radiation on cylinder head. Masters thesis, Universiti Teknologi Malaysia.

Azlan, Mohd Azwir (2006) Design a CVT lubricant test device. Masters thesis, Universiti Putra Malaysia.

Azlan, Mohd Azwir (2006) Design a CVT lubricant test device. Masters thesis, Universiti Putra Malaysia.

Bakhit Mabrouk, Wafi Adam (2015) Development of mathematical model for monorail suspension system under different track conditions. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hassan, Mohd Fahrul (2009) Design and development of an innovative apparatus for producing a spiral catalyst substrate for catalytic converter. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Isa, Khalid (2005) Vision-based autonomous vehicle driving control system. Masters thesis, Universiti Putra Malaysia.

Jajuli, Fatin Afiqah (2017) A comparative evalaution on the performance and emission characteristics of an internal combustion engine using ceramic and metallic catalytic converter. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jamali, Qadir Bakhsh (2018) Characterization of whole-body vibration for monorail passenger ride comfort. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Jamaluddin, Mohd Fakhrul Razi (2015) Characteristic studies on types of paint spray for automotive parts in small and medium industry. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Kamaruddin, Muhamad Khiril (2015) Influence of passenger car air conditioner system thermostat level setting to fuel consumption and thermal comfort. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Md Jalil, Mohd Azlis Sani (2005) Development of Al-Cu-SiCp metal matrix composite for automotive applications. Masters thesis, Universiti Malaya.

Mohd Ali, Mas Fawzi (2007) Development of a direct fuel injector for a two-stroke gasoline engine. Masters thesis, Universiti Teknologi Malaysia.

Mohd Kiblee, Shahizul Eza (2005) Lane detection system for autonomous vehicle using image processing techniques. Masters thesis, Universiti Putra Malaysia.

Nemmang, Mohd Shafie (2017) Development of vehicle lane changing model within u-turn facilities. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Othoman, Mohamad Asyraf (2015) Effect of sun radiation exposure on indoor air quality of car interior in tropical country. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Pranoto, Hadi (2020) Speed and fatigue control using speed limiter integrated fatigue analyzer for truck and bus. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Rosli, Naida (2017) An intervention for motorcycle helmet usage based on technology acceptance model. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Soon, Adrian Bee Toing (2013) Intelligent road recognition system for automous vehicle. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Tam, Lina (2015) The development of finite element model for Malaysian Female Anthropometric Dummy. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Tengku Ahmad, Tengku Marissa (2013) Climate control utilizing solar powered ventilation system for parked car. Masters thesis, Universiti Tun Hussein Malaysia.

Yahya, Mohd Shahir (2005) Designing of public vehicle driver's seat. Masters thesis, Universiti Putra Malaysia.

Zainul Abidin, Zainul Ameerul Ikhsan (2021) Development of a lab-scale hybrid vehicle system for small gasoline engine. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zakaria, Mohamad Fauzi (2007) Development of a driver information system based on onboard diagnostic II communication protocol. Masters thesis, Universiti Putra Malaysia.

Zakaria, Mohamad Fauzi (2007) Development of a driver information system based on onboard diagnostic II communication protocol. Masters thesis, Universiti Putra Malaysia.

Zaman @ Bujang, Izzuddin (2005) Study of dynamic behaviour of truck chassis. Masters thesis, Universiti Teknologi Malaysia.