Items where Subject is "T Technology > TN Mining engineering. Metallurgy > TN600-799 Metallurgy"

Article

Abdul Latif, Noradila and Auspan, Afiffikri and Mustapa, Mohammad Sukri and Mohd Joharudin, Nurul Farahin and Nasir, Nurul Fitriah (2019) Effect of loading rates and single edge notch bending (SENB) specimen thicknesses on shear lips formation for Al6061 alloy. Malaysian Journal of Microscopy, 15. pp. 38-45. ISSN 1823-7010

Ahmad, Rabiatul Adawiah and Ali, Ahmad Hadi and Isiyaku, Aliyu Kabiru and Bhari, Bibi Zulaika (2017) Improved resistivity and surface morphology of laser treated Cr/Pd metal contact sputter deposited on Si. Journal of Science and Technology, 9 (3). pp. 101-105. ISSN 2229-8460

Al-Alimi, Sami and Lajis, Mohd Amri and Shamsudin, Shazarel and Chan, B.L. and Mohammed, Yahya and Ismail, Al Emran and Sultan, N. M. (2020) Development of metal matrix composites and related forming techniques by direct recycling of light metals: a review. International Journal of Integrated Engineering, 12 (1). pp. 144-171. ISSN 2600-7916

Al-Alimia, Sami and Lajis, Mohd Amri and Shamsudin, Shazarel and Yusuf, Nur Kamilah and Boon, Loong Chan and Didane, Djamal Hissein and H. Rady, Mohammed and M. Sabbar, Huda and S. Msebawi, Munthader (2021) Development of Hot Equal Channel Angular Processing (ECAP) consolidation technique in the production of Boron Carbide(B4C)-Reinforced Aluminium Chip (AA6061)-based composite. Int. Journal of Renewable Energy Development (IJRED), 10 (3). pp. 607-621. ISSN 2252-4940

Jamaludin, Mohamad Ikhwan and Abu Kasim, Nur Atikah and Mohamad Nor, Nor Hafiez and Ismail, Muhammad Hussain (2015) Development of porous Ti-6Al-4V mix with palm stearin binder by metal injection molding technique. American Journal of Applied Sciences, 12 (10). pp. 742-751.

Jol, P. Jose and Amin, A. M. and Ibrahim, M. H. I. and Zhong, Z.W. and Shamsudin, S. (2020) Debinding process of ss316L metal injection moulding under argon atmosphere. Journal of Advanced Manufacturing Technology, 14 (2). ISSN 1985-3157

Kazeem, Abubakar and Badarulzaman, Nur Azam and Wan Ali, Wan Fahmin Faiz (2019) Effect of isothermal heat treatment on hardness of X7475 aluminium alloys. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 55 (2). pp. 233-239. ISSN 2289-7879

Mohd Nor, Mohd Khir and Ho, C Sin and Janudin, Farah NA (2020) An experimental study on the deformation behaviour and fracture mode of recycled aluminium alloy AA6061-reinforced alumina oxide undergoing high-velocity impact. Journal of Mechanical Engineering Science. pp. 1-12. ISSN 0954-4062

Nuhu, Awwal Hussain and Jikan, Suzi Salwah and Asman, Saliza and Badarulzaman, Nur Azam and Muhammad Zago, Dagaci and Bano, Nazia (2017) Fabrication and characterization of direct recycled Al-Cu-Cullet Metal composite. Journal of Science and Technology, 9 (4). pp. 15-18. ISSN 2229-8460

Book Section

Murshid, Noorafizah and Mohd Kamil, Nor Amani Filzah (2020) Selection of Suitable Binder in Solidification/Stabilization (S/S) Method: A Review. In: Water and Environmental Engineering. Penerbit UTHM, pp. 91-104. ISBN 978-967-2389-11-8

Thesis

Ab Kadir, Muhammad Irfan (2018) The effect of silicon carbide (SiC) on physical and mechanical properties of recycled aluminium chip AA6061. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad Shahbudin, Siti Nurshahmira (2019) Analysis of sintered WC-TIC-6CO by using powder metallurgy process. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Azhar, Mohd Faiz Hafeez (2018) The effect of flower-like tatania towards characteristics and performance of polysulfone mixed matrix membrane. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mat Noor, Fazimah (2009) Development of powder metallurgy route for production of novel fe-al intermetallics for high temperature applications. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Amin, Azriszul (2017) Application of restaurant waste lipids (RWL) as a binder component in metal injection moulding. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mustafa, Najwa (2012) Processibility of black garbage bag as a novel binder system in metal injection molding. Masters thesis, Universiti Tun Hussein Malaysia.

Shahizan, Nurul Raihan (2018) The influences of holmium on the solidification, microstructure and mechanical properties of elektron 21 magnesium alloy. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Tan, Kwok Joon (2018) Preparation of bioactive surface via gel oxidation on titanium for biomedical application (hip joint replacement). Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

W Abdul Rahman, Wan Fakhrurrazi (2018) Comparison of performance and emission characteristics between ceramic and metallic catalytic converter. Masters thesis, Universiti Tun Hussein Onn Malaysia.