![Logo](/images/sitelogo_resized.png)
Items where Division is "Faculty of Mechanical and Manufacturing Engineering > Department of Mechanical Engineering" and Year is 2016
![]() | Up a level |
A
Abd Latif, Hanif (2016) Acoustical characteristics of oil palm mesocarp fibres. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Adnan, Noor Quratul Aine (2016) Mechanical and physical characterizations of hydrothermally derived hydroxyapatite powder after being subjected to different holding time. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Ahmat, M. M. and Wahab, M. S. and Kassim, N. (2016) Parametric modelling of Malaysian teeth template using computer aided design. ARPN Journal of Engineering and Applied Sciences, 11 (8). pp. 5269-5274. ISSN 1819-6608
Azmir, Nor Azali (2016) Prediction model of hand arm vibration exposure among hand-held grass-cutters in Malaysia. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.
Azmir, Nor Azali and Ghazali, Mohd Imran and Yahya, Musli Nizam and Ali, Mohamad Hanafi (2016) Hand-arm vibration disorder among grass-cutter workers in Malaysia. International Journal of Occupational Safety and Ergonomics (JOSE), 22 (3). pp. 433-438. ISSN 1080-3548
G
Ghazali, Mohd Hafiz and Zaman, Izzuddin (2016) New design of tuned vibration absorber for wide frequency range application. ARPN Journal of Engineering and Applied Sciences, 11 (8). pp. 5469-5473. ISSN 1819-6608
H
Hamdan, A. and Mustapha, F. and Ahmad, K. A. and Mohd Rafie, A. S. and Ishak, M. R. and Ismail, A. E. (2016) The effect of customized woven and stacked layer orientation on tensile and flexural properties of woven kenaf fibre reinforced epoxy composites. International Journal of Polymer Science, 2016. pp. 1-11. ISSN 1687-9422
Hamdan, A. and Mustapha, F. and Ahmad, K. A. and Mohd Rafie, A. S. and Ismail, Al Emran (2016) The bonded macro fiber composite (MFC) and woven kenaf effect analyses on the micro energy harvester performance of kenaf plate using modal testing and Taguchi method. Journal of Vibroengineering, 18 (2). pp. 699-716. ISSN 1392-8716
Hashim, Mohd Yussni (2016) Effect of alkali treatment conditions optimization on kenaf fiber polyester composite characterization. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.
Hassan, Haswira (2016) Experimental and simulation study on the effect of geometrical and flow parameters for combined-hole film cooling. Masters thesis, Universiti Tun Hussein Onn Malaysia.
I
Ibrahim, M. H. I. and Abdul Razak, M. I. and Mustafa, N. and Selamat, M. A. (2016) Carbon-copper (C-Cu) composites using local carbon material through warm compaction process for potential electrical and electronic applications. ARPN Journal of Engineering and Applied Sciences, 11 (18). pp. 11117-11123. ISSN 1819-6608
K
Kee, Huong Lai and Zainuddin, Zarita and Ong, Pauline (2016) A harmony search-based learning algorithm for epileptic seizure prediction. International Journal of Management and Applied Science, 2 (12). pp. 164-169. ISSN 2394-7926
L
Lai, Chee Sern and Mohamad, Mimi Mohaffyza and Lee, Ming Foong and Mohd Salleh, Kahirol and Sulaiman, Nor Lisa and Rosli, D’oria Islamiah and Chang, Wilson Vui Seng (2016) Cyberbullying among youth in Malaysia. Malaysia Journal of Youth Studies, 15. ISSN 2180-1649
M
Maksud, M. I. and Nodin, M. N. and Yusof, M. S. and Hassan, S. (2016) Utilizing rapid prototyping 3D printer for fabricating flexographic PDMS printing plate. ARPN Journal of Engineering and Applied Sciences, 11 (2). pp. 7728-7734. ISSN 1819-6608
Mohamed Salleh, Muhammad and Zaman, Izzuddin (2016) Finite element modelling of fixed-fixed end plate attached with vibration absorber. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2336-2339. ISSN 1819-6608
Mohamed Salleh, Muhammad and Zaman, Izzuddin (2016) The effects of absorber attachment location on vibration response of simply supported plate. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 8663-8667. ISSN 1819-6608
Mohd Nor, Mohd Khir and Ma`at, Norzarina (2016) Simplified approach to validate constitutive model formulation of orthotropic materials undergoing finite strain deformation. Journal of Engineering and Applied Science, 11 (10). pp. 2146-2154. ISSN 1816-949X
N
Noh @ Seth, Nur Hazirah (2016) Parametric study on the design of baffle for three-dimensional turning diffuser. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.
S
Sa'ude, Nasuha (2016) Layered manufacturing of polymer matrix composites (PMC) materials via fused deposition modeling (FDM). Doctoral thesis, Universiti Tun Hussein Onn Malaysia.
Saini, Adam (2016) Mechanical design of an automated vehicle driving system for drive cycle testing. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Sapit, Azwan and Mohammed, Akmal Nizam and Razali, Mohd. Azahari and Hushim, Mohd Faisal Bin and Khalid, Amir and Manshoor, Bukhari (2016) Rapeseed oil spray development of diesel idi spray nozzle under air movement influence. ARPN Journal of Engineering and Applied Sciences, 11 (18). pp. 11183-11187. ISSN 1819-6608
Suardi, Mirnah (2016) Rapid premixing fuel-water injector in burner combustion. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Y
Yahya, Siti Asia (2016) Characterizations of Malaysia PALF properties between hand scrapping and PALF M1. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Z
Zulkifli Jasmin, Zahir Fikri Bin and Azlis-Sani, Jalil and Md Rohani, Munzilah and Abd Hamid, Nor Aziati and Sabri, S. M. and Ismail, S. M. and Ahmad Tajedi, Noor Aqilah and Abd Aziz, Roseni and Md Zein, Raemy (2016) Physical fatigue assessment for intrastate bus driver. ARPN Journal of Engineering and Applied Sciences, 11 (18). pp. 11170-11177. ISSN 1819-6608