Items where Division is "Faculty of Mechanical and Manufacturing Engineering > Department of Mechanical Engineering" and Year is 2019

Abdul Latif, Noradila and Auspan, Afiffikri and Mustapa, Mohammad Sukri and Mohd Joharudin, Nurul Farahin and Nasir, Nurul Fitriah (2019) Effect of loading rates and single edge notch bending (SENB) specimen thicknesses on shear lips formation for Al6061 alloy. Malaysian Journal of Microscopy, 15. pp. 38-45. ISSN 1823-7010

Abdul Ridha, Salih Meri (2019) Experimental and simulation analysis for performance enhancement of elliptical savonius wind turbine by modifying blade shapes. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Wahab, Hanani and M. Rus, Anika Zafiah and Abdullah, M. F. L. and Abdullah, Nur Munirah (2019) Sound absorption coefficient and water content responses in acoustic analysis based on renewable polyurethane foam composites. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8 (9S3). pp. 1576-1581. ISSN 2278-3075

Abdullah, Nur Munirah (2019) Synthesis and characterization of ultra violet curable renewable polymer graphite composites. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Abdullahi, Tijjani (2019) Development and optimization of zeolite synthesis route from natural koalin for adsorption of dyes. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad, Muhammad Ariff Haikal (2019) Investigation on removal mechanism in catalytic aided electrical discharge machining of polycrystalline diamond. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad Nordin, Mohd Nor Azmi (2019) The evaluation of acoustic characteristic performance on natural sound absorbing materials from cogon grass waste. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad Nordin, Mohd Nor Azmi (2019) The evaluation of acoustic characteristic performance on natural sound absorbing materials from cogon grass waste. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad Raus, Azli Amin (2019) Performance evaluation of alsi10mg mould insert material fabricated by selective laser melting process. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad Shahbudin, Siti Nurshahmira (2019) Analysis of sintered WC-TIC-6CO by using powder metallurgy process. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Azlan, W. M and Salleh, S. M and Mahzan, S and Sadikin, A and Ahmad, S (2019) Experimental dataset to develop a parametric model based of DC geared motor in feeder machine. International Journal of Electrical and Computer Engineering (IJECE), 9 (3). pp. 1-5. ISSN 2088-8708

Fitri, Muhamad (2019) The effect of chemical treatment, fibre length, fibre content and injection moulding parameters to uv irradiation resistance of oil palm fibre reinforced composites. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Hamza, Sabah Salim and Yaakob, Mohd. Yuhazri and Ismail, Al Emran and Al Absi, Salih Meri (2019) Influence of geometric shape on the deformation performance of natural jute/epoxy specimens under axial quasi-static compression. TEST Engineeri & Management, 81. pp. 719-732. ISSN 0193-4120

Haron, Nazrul Syaif (2019) Drying kinetics of pepper in swirling fluidized bed dryer. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hayder, Ali Mohammed (2019) Thermal performance of backflow solar air heating with integrated nanoparticle enhanced pcm absorber storage system. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ho, C.S. and Ab Rani, M. A. and Mohd Nor, M. K. and Ma’at, N. and Hameed Sultan, M. T. and Lajis, M. A. and Yusuf, N. K. (2019) Characterization of anisotropic damage behaviour of recycled aluminium alloys AA6061 undergoing high velocity impact. The International Journal of Integrated Engineering, 11 (1). pp. 247-256. ISSN 2229-838X

Hussin, Azmee (2019) Investigation of mould design and process parameter optimisation of plastic injection moulding for thin wall part. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jabbar, Balasem Abdulameer (2019) Experimental and simulation study of a diffuser augmented wind turbine to enhance the performance by modifying diffuser and rotor. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Jamian, Saifulnizan and Watanabe, Yoshimi and Sato, Hisashi (2019) Formation of compositional gradient in Al/SiC FGMs fabricated under huge centrifugal forces using solid-particle and mixed-powder methods. Ceramics International, 45. pp. 9444-9453. ISSN 0272-8842

Jamian, Saifulnizan and Watanabe, Yoshimi and Satob, Hisashi (2019) Formation of compositional gradient in AlSiC FGMs fabricated under huge centrifugal forces using solid-particle and mixed-powder methods. CERAMICS INTERNATIONAL, 45 (7). pp. 9444-9453. ISSN 0272-8842

K. Ajeel, Raheem and W. Salim, W.S.-I and Hasnan, Khalid (2019) Influences of geometrical parameters on the heat transfer characteristics through symmetry trapezoidal-corrugated channel using SiO2-water nanofluid. International Communications in Heat and Mass Transfer, 101. pp. 1-9. ISSN 0735-1933

K. Ajeel, Raheem and Wan Salim, Wan Saiful-Islam and Hasnan, Khalid (2019) Influences of geometrical parameters on the heat transfer characteristics through symmetry trapezoidal-corrugated channel using SiO2-water nanofluid. International Communications in Heat and Mass Transfer, 101. pp. 1-9. ISSN 0735-1933

Kamarudin, Khairu (2019) Evaluation on performance of square finned conformal cooling channel (sfccc) fabricated by selective laser melting (slm) on plastic moulded part. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Kanasan, Nanthini (2019) Magnesium doped hydroxyapatite/sodium alginate biocomposite for bone implants application. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Kareem, A K and Fakhri, O M and Ismail, A E and Taib, Ishkrizat and Nemah, Mohammed Najeh (2019) Mechanisms and treatment of femoropoplitealin-stent restenosis. Test Engineering & Management, 81 (11-12). pp. 704-718. ISSN 0193-4120

Low, Ee Soong and Ong, Pauline and Cheah, Kah Chun (2019) Solving the optimal path planning of a mobile robot using improved Q-learning. Robotics and Autonomous Systems, 115. pp. 143-161. ISSN 0921-8890

M Elaswad, Ashraf Mahmood (2019) Solidification, microstructure and mechanical properties of mg-nd-gd-zn-zr cast magnesium alloy with yttrium, erbium and samarium additions. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

M. A. Ataalah, Abdurezzag (2019) Development of new lean manufacturing approach through people development and process improvement as a mediator in the libyan companies. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

M. Halmi, M. A. and Harimon, M. A. and Mohd Tobi, L. and Mahmod, M. F. (2019) Fatigue performance of thermal spray coatings on carbon steel: a review. International Journal of Mechanical Engineering and Technology (IJMET), 10 (3). pp. 1285-1300. ISSN 0976-6340

Madon, Rais Hanizam (2019) Development of new steam methane reforming mobile plant with micro-scale catalytic channels. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Madon, Rais Hanizam (2019) Development of new steam methane reforming mobile plant with micro-scale catalytic channels. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mat, Mohamad Nur Hidayat (2019) Geometry optimization of dry ice blasting nozzle for the noise reduction using experimental validation. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mat Wan, Lauren (2019) Acoustical characteristic of empty fruit bunch (EFB) fibre with influence of sodium hydroxide treatment time and decay lifespan. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mirus, Muhammad Farhan and Nasir, Nurul Fitriah and Taib, Ishkrizat and Hariri, Azian and Nordin, Normayati and Mat Isa, Norasikin (2019) A short review on biodiesel production and costing. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 53 (2). pp. 146-156. ISSN 2289-7879

Mohammed Mahdi, Ammar Abdo (2019) Development of a vehicle robotic driver with intelligent control system modelling for automated standard driving-cycle tests. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohammed Usman, Abdullahi (2019) Development of carbon footprint quantification and reduction (cafquar) assessment tool for selected non-residential buildings. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Haizan, Mohamad Azrul Azhad (2019) Identification of shift variation in bivariate process using pattern recognition technique. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Joharudin, N.F. and Abdul Latif, N. and Mustapa, M.S. and Mansor, M.N. and Siswanto, W.A. and Murugesan, J. and Yusoff, F. (2019) Effect of amorphous silica by rice husk ash on physical properties and microstructures of recycled aluminium chip AA7075. Materials Science and Technology Engineering, 50 (3). pp. 283-288. ISSN 0933-5137

Mohd Yusoff, Ainul Husna (2019) System identification and pid control of toothbrush simulator system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mustafa, Najwa (2019) Optimization processability of ss316l used natural hydroxyapatite from waste tilapia fish bones in metal injection molding. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mustaffa, Norrizal (2019) Combustion characteristics of a spark ignition engine operating with liquid lpg injection. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

NAGENTRAU, Muniandy and MOHD TOBI, Abdul Latif and Jamian, Saifulnizan and OTSUKA, Yuichi (2019) Contact slip prediction in HAp coated artificial hip implant using finite element analysis. Mechanical Engineering Journal, 6 (3). pp. 1-9. ISSN 2187- 9745

Nagentrau, M. and Mohd Tobi, A.L. and Sambu, M. and Jamian, S. (2019) The influence of welding condition on the microstructure of WC hardfacing coating on carbon steel substrate. International Journal of Refractory Metals and Hard Materials, 82. pp. 43-57. ISSN 0263-4368

Nemah, Mohammed Najeh (2019) A hybrid haptic stimulation prosthetic wearable device to recover the missing sensation of the upper limb amputees. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Oh Lai Ching, Narong (2019) Hybrid optimisation electromagnetic interference shielding effectiveness:mechanical and physical performance of plaster mortar containing palm oil fuel ash using taguchi grey and taguchi-flower pollination algorithm methods. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ong, Pauline and Ho, Choon Sin and Chin, Desmond Daniel Vui Sheng and Sia, Chee Kiong and Ng, Chuan Huat and Wahab, Md Saidin and Bala, Abduladim Salem (2019) Diameter prediction and optimization of hot extrusion-synthesized polypropylene filament using statistical and soft computing techniques. Journal of Intelligent Manufacturing, 30. pp. 1957-1972. ISSN 1572-8145

Ong, Pauline and Tieh, Tony Hieng Cai and Lai, Kee Huong and Lee, Woon Kiow and Ismon, Maznan (2019) Efficient gear fault feature selection based on moth‑flame optimisation in discrete wavelet packet analysis domain. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 41. pp. 1-14. ISSN 1678-5878

Ong, Pauline and Zainuddin, Zarita (2019) Optimizing wavelet neural networks using modified cuckoo search for multi-step ahead chaotic time series prediction. Applied Soft Computing Journal, 80. pp. 374-386. ISSN 1568-4946

Paisal, Muhammad Sufyan Amir and Taib, Ishkrizat and Ismail, Al Emran and Tajul Arifin, Ahmad Mubarak (2019) Numerical analysis on the effect of normotensive and hypertensive physiological conditions onto hemodynamic characteristics in stented carotid artery. International Journal of Mechanical & Mechatronics Engineering IJMME, 19 (1). pp. 94-107. ISSN 2227-2771

Prathabrao, M. and Amin, S.Y.M. and Othman, M.H. and Shahbudin, S.N.A. (2019) Optimization of injection molding parameters for WC-TaC-6Co. International Journal of Engineering and Technology, 8 (1.1). pp. 1-5. ISSN 2227-524X

Rady, Mohammed Hussien (2019) Fatigue life and mechanical behaviour of aluminium alloy aa6061 chips prepared by hot extrusion process. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ramli, Afifah (2019) The effect of physical properties on flame spread behavior for various paper/bagasse composition. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ramly, Edly Ferdin (2019) A diagnosis framework for selecting operational improvement opportunities for Malaysian industries. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Razali, Nasrullah and Ong, Pauline and Ibrahim, Mazlan and Wan Daud, Wan Rosli and Zainuddin, Zarita (2019) Modeling of acetosolv pulping of oil palm fronds using response surface methodology and wavelet neural networks. Cellulose, 26. pp. 4615-4628. ISSN 0969-0239

Sabri, Ainaa Mardhiah (2019) Parameter analysis of copper-nickel-tungsten prepared via powder metallurgy process for electrical discharge machining of polycrystalline diamond. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Saim, Raudhah (2019) Design, manufacturing and testing of parachute recovery system for aludra SR-10 unmanned aerial vehicle (UAV). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sapit, Azwan and Razali, Mohd Azahari and Hushim, Mohd Faisal and Khalid, Amir and Mohmad Ja'at, Md Norrizam and Samsubaha, Muhammad Fauzi and Tuan A Talib, Tuan Mohamad Kamarul Hisyam (2019) Effect of acoustic excitation toward jet flame: an experimental design. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 53 (1). pp. 69-74. ISSN 2289-7879

Sies, M.F. and Hakim, M. Zikril and Pairan, M. Rasidi and Madlan, M.A. and Asmuin, N. and Zakaria, H. (2019) An investigational research of spray pattern for deflector flat spray nozzle using horizontal patternator. Test Engineering and Management, 81. pp. 733-740. ISSN 0193-4120

Taufek, Thoufeili (2019) Evaluation of hydroxyapatite (HA) from waste eggshell strengthened with ultra high molecular weight polyethylene (UHMWPE) by using injection molding process. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Yaakub, Mohd Fauzi (2019) Aerodynamic analysis of groove based vortex trap configuration on the retreating helicopter blade. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Zakaria, Hanis (2019) Analysis of rbd palm olein abrasive blasting as new metal surface cleaning method. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Zulkifli, Abd Fathul Hakim (2019) Diesel-cng dual fuel combustion characterization using vibro-acoustic analysis and response surface methodology. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.