Items where Division is "Faculty of Engineering Technology > Department of Mechnical Engineering Technology" and Year is 2020

Article

A Rhaffor, Kauthar and Jamian, Rahim (2020) The role of 5s in improving Occupational Safety and Health Management System (OSHMS) in Small and Medium Enterprises (SMEs). Journal of Safety, Health and Ergonomics, 2 (1). pp. 1-6. ISSN 2682-745X

Abdul Rahim, Nurliyana and Mokhtar, Mohd Hezri and Mat Nayan, Nadirul Hasraf and Ismail, Muhammad Yusof and M. Buhari, Suhaila and Abdullah, Mardina and Bahari, Siti Aminah (2020) L-Band amplitude scintillations during solar maximum at a low latitude station. International Journal of Advanced Trends in Computer Science and Engineering, 9 (1.4). pp. 465-470. ISSN 2278-3091

Alias, Siti Salwa and Harun, Zawati and Azhar, Faiz Hafeez and Ibrahim, Siti Aida and Johar, Banjuraizah (2020) Comparison between commercial and synthesised nano flower-like rutile TiO2 immobilised on green super adsorbent towards dye wastewater treatment. Journal of Cleaner Production, 251. pp. 1-18. ISSN 0959-6526

Hamdan, Mohamad Hafizzudin and Mohd Asry, Anis Maisarah and Mustafa, Farahiyah (2020) Low wireless power transfer using inductive coupling for remote control car charger with indicator. Journal of Electrical Power and Electronics Systems, 2 (1). pp. 1-5. ISSN 2672-734X

Hui, Alycia Yap Ching and Mahmood, Salwa and Raja Mamat, Tengku Nur Azila (2020) Design Improvement of Auditorium Seating: A Case Study at Pagoh Education Hub. Human Factors and Ergonomics Journal, 5 (1). pp. 52-59. ISSN 2590-3750

Huzaisham, Nur Athirah and Marsi, Noraini (2020) Utilization of banana (musa paradisiaca) peel as bioplastic for planting bag application. International Journal of Advanced Research in Engineering and Technology (IJARET), 11 (4). pp. 108-118. ISSN 0976-6480

Huzaisham, Nur Athirah and Marsi, Noraini and Mamat, Hasri (2020) Physical Characterization of Banana (Musa Paradisiaca) Peel Derived Bioplastic. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 10. pp. 85-96. ISSN 2249–6890

Huzaisham, Nur Athirah and Marsi, Noraini and Muhd Rus, Anika Zafiah and Masrol, Shaiful Rizal and Mahmood, Salwa and Main, Nor Mazlana and Mohd Fodzi, Muhammad Haikal and Thana Singam, Rupashinii (2020) Application of waste banana peels for wastewater treatment: a review. Journal of Computational and Theoretical Nanoscience, 17 (1). pp. 596-602. ISSN 1546-1955

Janis, Ilyana and Alias, Maizam and Zulkipli, Muhammad and Muhammad-Sukki, Firdaus (2020) Using illustrations to make decisions on the most appropriate qualitative research methodology: the industry 4.0 scenario. International Journal of Qualitative Methods, 19. pp. 1-16. ISSN 1609-4069

Kunchimon, Siti Zaharah and Tausif, Muhammad and Goswami, Parikshit and Cheung, Vien (2020) From hybrid fibers to microfibers: the characteristics of polyamide 6/polypropylene blend via one-step twin-screw melt extrusion. Polymer Engineering and Science, 60 (4). pp. 690-699. ISSN 0032-3888

Madon, Rais Hanizam and Mohd Ali, Mas Fawzi and Sarwani, Khairul Ilman and Osman, Shahrul Azmir and Razali, Mohd Azahari and Mohammad, Abdul Wahab (2020) Effect of steam to carbon ratio (S:C) on steam methane reforming’s yield over coated nickel aluminide (Ni3Al) catalyst in micro reactor. Jurnal Kejuruteraan, 32 (4). pp. 657-662. ISSN 0128-0198

Mahmood, Salwa and Syed Abdul Aziz, Syed Abd.Hafiz and Zulkifli, Mohd Zakwan and Marsi, Noraini (2020) Rula and Reba analysis on work postures: a case study at poultry feed manufacturing industry. Journal of Computational and Theoretical Nanoscience, 17 (2-3). pp. 755-764. ISSN 1546-1955

Marsi, Noraini and Chow, Li Kien and A Rani, Juhari and Main, Nor Mazlana and Mohd Jamir, Mohd Ridzuan and Shaari, Muhammad Farid (2020) Preparation and Performance Test of PEFB Reinforced Box Waste Coated Superhydrophobic Coating for Shoe Sole Application. International Journal of Integrated Engineering, 12 (5). pp. 210-216. ISSN 2229-838X

Marsi, Noraini and Huzaisham, Nur Athirah and Muhd Rus, Anika Zafiah and Lecthumanan, Thineshnaidu and Mahmood, Salwa and Masrol, Shaiful Rizal and Abdul Rashid, Azrin Hani and Mohd Fodzi, Muhammad Haikal and Thanasingam, Rupashinii (2020) The mechanical performance of tile based on plastic waste (PW) mixed wood waste (MWW). Journal of Computational and Theoretical Nanoscience, 17 (1). pp. 795-802. ISSN 1546-1955

Marsi, Noraini and Majlis, Burhanuddin Yeop and Mohd Yasin, Faisal and Zainal Abidin, Hafzaliza Erny and Hamzah, Azrul Azlan (2020) A review: properties of silicon carbide materials in MEMS application. International Journal of Nanoelectronics and Materials, 13 (NIL). pp. 113-128. ISSN 1985-5762

Masrol, Shaiful Rizal and Shariffudin, Nornatasha and Adnan, Sharmiza and Irwan Ibrahim, Mohd Halim and A Hamid, Mokhtar (2020) Virgin kraft pulp and paper characteristics of Vitex Pubescens Vahl. (Halban) wood. International Journal of Recent Technology and Engineering (IJRTE), 8 (5). pp. 1551-1556. ISSN 2277-3878

Mat Jais, Fatin Nadiah and Roslan, Mohd Nazrul and Nasir, Siti Hana and Baharuddin, Norhazaedawati and Uyup, Mohd Khairun Anwar (2020) Tensile properties of untreated bambusa vulgaris, gigantoch- loa levis gigantochloa scortechinii, gigantochloa wrayi, and schizostachyum zollingeri bamboo fibers. International Journal of Advanced Trends in Computer Science and Engineering, 9 (1). pp. 314-319. ISSN 2278-3091

Mohd Fodzi, Muhammad Haikal and Marsi, Noraini and Chow, Li Kien (2020) Utilization of PEFB reinforced box waste coated super-hydrophobic coating for shoe sole applications. International Journal of Advanced Trends in Computer Science and Engineering, 9 (1.1). pp. 461-465. ISSN 2278-3091

Mohd Fodzi, Muhammad Haikal and Marsi, Noraini and Huzaisham, Nur Athirah and Thana Singam, Rupashinii (2020) Influence of the ratio on the mechanical properties of epoxy resin composite with diapers waste as fillers for partition panel application. Test Engineering & Management, 83 (3-4). pp. 10141-10151. ISSN 0193-4120

Mohd Fodzi, Muhammad Haikal and Marsi, Noraini and Muhd Rus, Anika Zafiah and Awang, Mariah and Huzaisham, Athirah and Thanasingam, Rupashinii (2020) A review on the application of the solid waste for building material. Journal of Computational and Theoretical Nanoscience, 17 (1). pp. 613-619. ISSN 1546-1955

Mohd Fodzi, Muhammad Haikal and Marsi, Noraini and Shariff, Hafizuddin Hakim (2020) Analysis of epoxy composite with diapers waste as fillers: relationship of density, porosity and sound absorption coefficient. International Journal of Advanced Research in Engineering and Technology (IJARET), 11 (4). pp. 137-146. ISSN 0976-6480

Mohd Harun, Dalila and Mohd Tobi, A L and Jamian, Saifulnizan (2020) Investigation on the effect of reciprocating sliding wear test for titanium alloy, Ti-6Al-4V under frequency set up. International Journal of Emerging Trends in Engineering Research, 8 (12). pp. 23-28. ISSN 2347-3983

Mokeramin, Muslihah and Roslan, Mohd Nazrul and Abdul Rashid, Azrin Hani and Nasir, Siti Hana and Abdul Halip, Juliana (2020) Chemical effect on the mechanical properties of bamboo fiber for textile: a review. International Journal of Advanced Trends in Computer Science and Engineering, 9 (1). pp. 353-359. ISSN 2278-3092

Mucsi, Viktor and Ayub, Ahmad Syahrir and Muhammad-Sukki, Firdaus and Zulkipli, Muhammad and Muhtazaruddin, Mohd Nabil and Mohd Saudi, Ahmad Shakir and Ardila-Rey, Jorge Alfredo (2020) Lightning protection methods for wind turbine blades: an alternative approach. Applied Sciences, 10 (6). pp. 1-18. ISSN 2076-3417

Nasir, Hana and Huzaisham, Nur Athirah and Mahmood, Salwa and Marsi, Noraini and Abdul Rashid, Azrin Hani and El Bakri, Helmy Mustafa and Misnon, Mohd Iqbal (2020) The influence of physical properties on comfort performance of bedsheet fabrics. International Journal of Advanced Research in Engineering and Technology (IJARET), 11 (11). pp. 1012-1029. ISSN 0976-6480

S. Abdullah, S. A. and M. Zuhudi, N. Z. and Mohd Aris, K. D. and Roslan, M. N. and Isa, M. D. (2020) Influence of yarn parameters on cotton/kenaf blended yarn characteristics. Journal of Mechanical Engineering and Sciences (JMES), 14 (4). pp. 7622-7628. ISSN 2289-4659

Shirazi, Mohammad Gharehzadeh and A Rashid, Ahmad Safuan and Nazir, Ramli and Abdul Rashid, Azrin Hani and Horpibulsuk, Suksun (2020) Enhancing the bearing capacity of rigid footing using limited life kenaf geotextile reinforcement. Journal of Natural Fibers, 1 (NIL). pp. 1-16. ISSN 1544-046X

Singam, Rupashinii Thana and Marsi, Noraini and Hamzah, Azrul Azlan and Mohd Yasin, Faisal (2020) Performance of organic dyes for textile cotton fabric. International Journal of Nanoelectronics and Materials, 13 (NIL). pp. 289-300. ISSN 1985-5761

Thana Singam, Rupashinii and Marsi, Noraini and Abdul Rashid, Azrin Hani and Nasir, Siti Hana and Ibrahim, Siti Aida and Roslan, Mohd Nazrul and Huzaisham, Nur Athirah and Mohd Fodzi, Muhammad Haikal (2020) A review on characteristics and potential applications of henna leaves (lawsonia inermis). Journal of Computational and Theoretical Nanoscience, 17 (2-3). pp. 603-612. ISSN 1546-1955

Thana Singam, Rupashinii and Marsi, Noraini and Mamat, Hasri and Mohd Rus, Anika Zafiah and Nasir, Siti Hana and Shaari, Muhammad Farid (2020) Physical properties of natural dyes based on lawsonia inermis, azadiractha indica and curcuma longa coated with superhydrphobic coating for textile applications. International Journal of Advanced Research in Engineering and Technology (IJARET), 11 (4). pp. 301-311. ISSN 0976-6480

Zainal Abidin, Hafzaliza Erny and Poh, Choon Ooi and Teck, Yaw Tiong and Marsi, Noraini and Ismardi, Abrar and Mohd Noor, Mimiwaty and Nik Zaini Fathi, Nik Amni Fathi and Abd Aziz, Norazreen and Sahari, Siti Kudnie and Sugandi, Gandi and Yunas, Jumril and Chang, Fu Dee and Majlis, Burhanuddin Yeop and Hamzah, Azrul Azlan (2020) Stress and deformation of optimally shaped silicon microneedles for transdermal drug delivery. Journal of Pharmaceutical Sciences, 109 (8). pp. 2485-2492. ISSN 0022-3549

Book Section

Abd Halim, Muhamad Fazli and Khalid, Amir and Leman, Abdul Mutalib and Mohamed Sunar, Norshuhaila (2020) An overview of biodiesel energy. In: Energy Management. Penerbit UTHM, pp. 153-157. ISBN 978-967-2389-38-5

Abd Latip, Muhammad Faris and Abdullah, Muhammad Arif and Khalid, Amir and Jaat, Norrizam and Ngadiron, Zuraidah and Zaman, Izzuddin (2020) Hazard identification, risk assessment and risk control: a study at construction site. In: Occupational Safety and Health - Case Study. Penerbit UTHM, pp. 105-122. ISBN 978-967-2916-31-4

Abd Wahab, Muhammad Badrul Amin and Mustar, Muhamad Radzi and Mohamad Rus, Mohamad Arif and Mahmood, Salwa and Raja Mamat, Tengku Nur Azila (2020) Quality control improvement at Jana DCS Sdn. Bhd. In: Manufacturing Management and Improvement. Penerbit UTHM, pp. 118-125. ISBN 978-967-2389-59-0

Abu Bakar, Muhammad Amirul Firdaus and Nadarajan, Arjunan and Khalid, Amir and Azizul, Muhamad Asri and Mohamed, Norirda and Mahmudin, Rahmah (2020) Simulation and modeling of the behavior in the four-stroke spark ignition engine by using CFD simulation. In: Fuel, Automotive and Engine Technology. Penerbit UTHM, pp. 95-100. ISBN 978-967-2916-32-1

Ahmad, Nurul Fazilawati Hawa and Shafai@Shafie, Siti Nor Zulaikha and Ibrahim, Nur Hanisah and Mahmood, Salwa and Khalid, Amir and Jaat, Norrizam and Ngadiron, Zuraidah (2020) Occupational safety and health practice: a study at construction of large water tank. In: Occupational Safety and Health - Case Study. Penerbit UTHM, pp. 89-104. ISBN 978-967-2916-31-4

Chen, Chit Wee and Ting, Joseph Zhi Ho and Mahmood, Salwa and Khalid, Amir and Jaat, Norrizam and Basharie, Siti Mariam (2020) Hazards and incident investigation at palm oil mill industry. In: Occupational Safety and Health - Case Study. Penerbit UTHM, pp. 21-42. ISBN 978-967-2916-31-4

Gelau, Daryl and Ting, Joseph Zhi Ho and Chen, Chit Wee and Mohd Rafli, Izzat Emeer and Yahaya, Mohamad Amirul Ashraf and Ramlan, Ikhsan Mustain and Tajurahim, Nurul Ainina Nadhirah and Mahmood, Salwa and Ngadiman, Nor Hasrul Akhmal (2020) Improvement design of existing threshing machine at Kilang Sawit Risda, Ulu Keratong. In: Manufacturing Management and Improvement. Penerbit UTHM, pp. 91-98. ISBN 978-967-2389-59-0

Ghitheeth, Ali Hussein and Mohammed Hayder, Ali and Khalid, Amir and Ngadiron, Zuraidah (2020) Improvement of the operation and safety of nuclear power plants. In: Energy Management. Penerbit UTHM, pp. 21-36. ISBN 978-967-2389-38-5

Hakim, Mohd Ikmal and Fikrie, Mohamad and Hanis, Nur Zulaika and Khalid, Amir and Zaman, Izzuddin (2020) Effect of bio-degradable lubricating in the lubricant system of ICE engine. In: Fuel, Automotive and Engine Technology. Penerbit UTHM, pp. 43-50. ISBN 978-967-2916-32-1

Hussin, Muhammad Hazim and M Hussaen, El Hussaen and Ogab, Mohammed and Khalid, Amir and Ngadiron, Zuraidah (2020) A review of analysis the system of thermal power plant economics. In: Energy Management. Penerbit UTHM, pp. 55-76. ISBN 978-967-2389-38-5

Ithsan, Mohammad Zaki and Abu Bakar, Muhammad Azman and Khalid, Amir and Zainal Abidin, Shaiful Fadzil and Manshoor, Bukhari (2020) Engine performance characteristics and evaluation of variation in the length of intake plenum. In: Fuel, Automotive and Engine Technology. Penerbit UTHM, pp. 1-8. ISBN 978-967-2916-32-1

Junaidi, Adiliya Hellanie and John, Fredilla Ivy Tijah and Osman, Muhammad Yusra and Saadan, Muhammad Zainul Ariffin and Mahmood, Salwa and Saleh, Aslinda (2020) Work design improvement of food steamer at Pau Mira Frozen Food Industry. In: Manufacturing Management and Improvement. Penerbit UTHM, pp. 35-46. ISBN 978-967-2389-59-0

Kamal, Muhammad Nabil Farhan and Mazlan, Muhammad Kamal Arif and Khalid, Amir and Jaat, Norrizam and Ngadiron, Zuraidah and Basharie, Siti Mariam and Noranai, Zamri (2020) Occupational safety and health practice: a study at Infrastructure construction work. In: Occupational Safety and Health - Case Study. Penerbit UTHM, pp. 123-140. ISBN 978-967-2916-31-4

Khalaf, Marwan Abdulmutaleb and Jassam, Omar Ibrahim and Razali, Azahari and Khalid, Amir (2020) Alternative fuel from vegetable oils and animal fats. In: Energy Management. Penerbit UTHM, pp. 11-20. ISBN 978-967-2389-38-5

Klazly, Mohamad Mehi Alddin and Aliyu, Ruwaidu and Sapit, Azwan and Khalid, Amir (2020) Energy management in biodiesel production. In: Energy Management. Penerbit UTHM, pp. 1-10. ISBN 978-967-2389-38-5

MD Zin, Muhammad Fariq and Didane, Djamal Hissein and Ogab, Mohammed and M Elfaghi, Abdulhafid and Afolabi, Lukmon Owolabi (2020) Performance evaluation of a counter-rotating vertical axis wind turbine (VAWT) on a moving train. In: Advances in Mechanical, Manufacturing and Aerospace Engineering. Penerbit UTHM, pp. 133-144. ISBN 978-967-2916-56-7

Mahmood, Salwa and Marsi, Noraini and Jalil, Anis Jazira and Mathava, Kumudha (2020) Environmental effects of natural dyes and syntetic dyes: a comparison. In: Green Technology of Natural Dyes for Sustainable Development on Textile Industry. Penerbit UTHM, pp. 18-27. ISBN 978-967-2389-61-3

Mahmood, Salwa and Nasir, Siti Hana and Sazali, Nurul Aqilah and Wan Yusof, Wan Muhamad Alif (2020) Green textile dyeing process by using natural dyes: a review. In: Green Technology of Natural Dyes for Sustainable Development on Textile Industry. Penerbit UTHM, pp. 9-17. ISBN 978-967-2389-61-3

Marsi, Noraini and Chew, Gin Yan and Mohd Rus, Anika Zafiah and Kunchi Mon, Siti Zaharah (2020) Investigation of dyeing based on pandanus amaryllifolius for superhydrophobic coating in cotton-polyester blended in textile application. In: Green Technology of Natural Dyes for Sustainable Development on Textile Industry. Penerbit UTHM, pp. 52-58. ISBN 978-967-2389-61-3

Marsi, Noraini and Huzaisham, Nur Athirah and Ithnain, Zuraidah and Main, Nor Mazlana and Mohd Rus, Anika Zafiah (2020) Fabrication and characterization of HDPE plastic waste reinforced rubber composite. In: Green Composite Manufacturing Technology. Penerbit UTHM, pp. 67-75. ISBN 978-967-2389-85-9

Marsi, Noraini and Huzaisham, Nur Athirah and Ithnain, Zuraidah and Main, Nor Mazlana and Roslan, Mohd Nazrul and Shaari, Muhammad Farid and Kamarudin, Khairu (2020) Plastic waste and its method of recycling. In: Green Composite Manufacturing Technology. Penerbit UTHM, pp. 23-35. ISBN 978-967-2389-85-9

Marsi, Noraini and Mohd Fodzi, Muhammad Haikal and Subramaniam, Lingeshvaran and Abu Bakar, Bachik and Ibrahim, Md Zin (2020) Introduction of the composite materials and applications for manufacturing technology. In: Green Composite Manufacturing Technology. Penerbit UTHM, pp. 11-22. ISBN 978-967-2389-85-9

Marsi, Noraini and Mohd Fodzi, Muhammad Haikal and Subramaniam, Lingeshvaran and Mohd Rus, Anika Zafiah and Esa, Faizal and Wan Abdul Rahman, Wan Mohd Wardi (2020) Fabrication and physical properties of pipe based on fiberglass reinforced with plastic waste in-plant application system. In: Green Composite Manufacturing Technology. Penerbit UTHM, pp. 55-66. ISBN 978-967-2389-85-9

Marsi, Noraini and Sidni, Wardah and Mohd Rus, Anika Zafiah and Abdul Rashid, Azrin Hani (2020) The effects of lawsonia inermis pigmentation for superhydrophobic properties on cotton fabrics. In: Green Technology of Natural Dyes for Sustainable Development on Textile Industry. Penerbit UTHM, pp. 59-65. ISBN 978-967-2389-61-3

Marsi, Noraini and Sum, Man Kent and Mohd Rus, Anika Zafiah and Mohd Harun, Dalila (2020) Utilization of garcinia mangostana dyes for superhydrophobic oncotton textile application. In: Green Technology of Natural Dyes for Sustainable Development on Textile Industry. Penerbit UTHM, pp. 28-36. ISBN 978-967-2389-61-3

Marsi, Noraini and Tan, Ka Seng and Mohd Rus, Anika Zafiah and Mat Hassan, Nik Normunira (2020) Superhydrophobic dyeing of orange fruit pigment on cotton knitted textile application. In: Green Technology of Natural Dyes for Sustainable Development on Textile Industry. Penerbit UTHM, pp. 44-51. ISBN 978-967-2389-61-3

Marsi, Noraini and Thana Singam, Rupashinii and Chow, Li Kien and Mohd Rus, Anika Zafiah and Darlis, Norfrizalidris and Masrol, Shaiful Rizal and Kasmin, Ashari (2020) Fabrication process of palm empty fruit brunches reinforced with box waste coated super hydrophobic for shoe pad application. In: Green Composite Manufacturing Technology. Penerbit UTHM, pp. 45-54. ISBN 978-967-2389-85-9

Marsi, Noraini and Thana Singam, Rupashinii and Mohd Rus, Anika Zafiah and Zulkipli, Muhammad and Hehsan, Haffidzudin and Nawawi, Azli (2020) Overview on the different type of composite materials for footwear application. In: Green Composite Manufacturing Technology. Penerbit UTHM, pp. 1-10. ISBN 978-967-2389-85-9

Marsi, Noraini and Zakaria, Athirah and Mohd Rus, Anika Zafiah and Mahmood, Salwa (2020) Utilization dyeing process of coffea pigment as superhydrophobic coating on fabric application. In: Green Technology of Natural Dyes for Sustainable Development on Textile Industry. Penerbit UTHM, pp. 37-43. ISBN 978-967-2389-61-3

Masrol, Shaiful Rizal and Ahmad Fauzi, Syahmil Azim and Marsi, Noraini and Kamaruddin, Khairu and Mustaffa, Norrizal (2020) Sound absorption characteristics of Durian husk fibers reinforced polyurethane composite. In: Green Composite Manufacturing Technology. Penerbit UTHM, pp. 88-102. ISBN 978-967-2389-85-9

Md Noor, Muhammad Amirulhadi and Ahmad Khairuddin, Muhammad Adib and Hassan Fikri, Mohd Hafiz and Abd Rahim, Mohd Faidhul Erfan and Roslizan, Mohammad Fithri and Khairudin, Mohd Sacirbey and Mahmood, Salwa and Saleh, Aslinda and Talib, Norfazillah (2020) The improvement of standard operating procedures (SOP) and the process of grading the fresh palm fruit (BTS) at Kilang Kelapa Sawit Risda Ulu Keratong. In: Manufacturing Management and Improvement. Penerbit UTHM, pp. 72-90. ISBN 978-967-2389-59-0

Md Sah, Mohamad Sahril and Mohd Said, Mohamad Luqman Hakim and Khalid, Amir and Jaat, Norrizam and Ishak, Izuan Amin and Zainal Abidin, Shaiful Fadzil (2020) Occupational safety and health practice: a study for wastewater treatment. In: Occupational Safety and Health - Case Study. Penerbit UTHM, pp. 161-181. ISBN 978-967-2916-31-4

Misran, Amirul Faiz and Yahya, Muhammad Alief Ikhram and Mahmood, Salwa and Khalid, Amir and Jaat, Norrizam and Razali, Azahari and Noranai, Zamri (2020) Hazard identification, risk assessment and risk control: a study at precision part manufacturing industry. In: Occupational Safety and Health - Case Study. Penerbit UTHM, pp. 59-74. ISBN 978-967-2916-31-4

Mohd Badli, Muhammad Faizul Amri and Vicknasparran, Adam Nasuha and Khalid, Amir and Mustaffa, Norrizal and Ngadiron, Zuraidah and Mohamed Sunar, Norshuhaila (2020) Modern biomass-based transportation fuels from pyrolysis process, bio-ethanol, bio-methanol and bio-diesel. In: Fuel, Automotive and Engine Technology. Penerbit UTHM, pp. 51-62. ISBN 978-967-2916-32-1

Mohd Noor, Warda Hanani and Mohmad Jaat, Norrizam and Khalid, Amir and Leman, Abdul Mutalib and Mohamed Sunar, Norshuhaila (2020) Energy from organic sources. In: Energy Management. Penerbit UTHM, pp. 145-152. ISBN 978-967-2389-38-5

Mohd Rodzi, Siti Nur Aizierah and Zanalli, Sophia and Khalid, Amir and Manshoor, Bukhari and Ngadiron, Zuraidah (2020) Evolution engine technology in exhaust gas recirculation for heavy-duty diesel engine. In: Fuel, Automotive and Engine Technology. Penerbit UTHM, pp. 31-42. ISBN 978-967-2916-32-1

Ng, Si Jin and Samsuni, Muhamad Husni and Chen, Xue Chee and Tay, Poh Jing and Lee, Kah Ching and Mahmood, Salwa and Tajurahim, Nurul Ainina Nadhirah and Ngadiman, Nor Hasrul Akhmal (2020) Work design improvement at Miroad Rubber Industries Sdn. Bhd. In: Manufacturing Management and Improvement. Penerbit UTHM, pp. 22-34. ISBN 978-967-2389-59-0

Norazmi, Mohamad Amirul Faiz and Abdul Razak Ramesh, Mohamad Iqbal Afham and Ahmad Jais, Mohamad Harizat and Ramli, Mohamad Najmi and Md Shah, Mohamad Sahril and Mohd Said, Mohamad Luqman Hakim and Mahmood, Salwa and Saleh, Aslinda (2020) Work flow improvement at Kenny Leather (M) Sdn. Bhd. In: Manufacturing Management and Improvement. Penerbit UTHM, pp. 109-117. ISBN 978-967-2389-59-0

Othman, Amiruddin and Nazri, Ahmad Nazirul and Birahim, Muhamad Fikri Shahkhirin and Khalid, Amir and Jaat, Norrizam and Sapit, Azwan and Razali, Azahari (2020) Hazard identification, risk assessment and risk control: a study at food manufacturing industry. In: Occupational Safety and Health - Case Study. Penerbit UTHM, pp. 141-160. ISBN 978-967-2916-31-4

Ramli, Mohamad Najmi and Ahmad Jais, Mohamad Harizat and Khalid, Amir and Jaat, Norrizam and Manshoor, Bukhari and Noranai, Zamri (2020) Occupational safety and health practice: a study at rubber manufacturing industry by using hirarc. In: Occupational Safety and Health - Case Study. Penerbit UTHM, pp. 75-88. ISBN 978-967-2916-31-4

Roslam, Ahmad Nizamuddin and Zainuddin, Muhammad Amir Rahimi and Mamut, Muhammad Muhairie and Suriansah, Nur Lyana Syahirah and Basirun, Runizsyazrizan and Mahmood, Salwa and Tajurahim, Nurul Ainina Nadhirah and Ngadiman, Nor Hasrul Akhmal (2020) Ergonomic design improvement at Koko Minda Food Industries (M) Sdn. Bhd. In: Manufacturing Management and Improvement. Penerbit UTHM, pp. 47-57. ISBN 978-967-2389-59-0

Sarhan, Ali Raheem and Farag Ali, Magdi Saad and Manshoor, Bukhari and Khalid, Amir (2020) Performance of combined cycle power plant. In: Energy Management. Penerbit UTHM, pp. 77-102. ISBN 978-967-2389-38-5

Tajurahim, Nurul Ainina Nadhirah and Edirudzin, Muhammad Aizrul Ezuan and Nordin, Muhammad Alif Haziq and Mohd Esa, Faezah and Mahmood, Salwa (2020) Development of layout design and improvement of the working flow at Erul Food Industries. In: Manufacturing Management and Improvement. Penerbit UTHM, pp. 8-21. ISBN 978-967-2389-59-0

Tajurahim, Nurul Ainina Nadhirah and Mahmood, Salwa and Ngadiman, Nor Hasrul Akhmal (2020) Improvise the working condition at Kilang Beras Jelapang Selatan (M) Sdn. Bhd. In: Manufacturing Management and Improvement. Penerbit UTHM, pp. 99-108. ISBN 978-967-2389-59-0

Tan, Jedidiah and Oh, Kar Heng and Dhat run @ Chat run, Virakphon and Khalid, Amir and Jaat, Norrizam (2020) Occupational safety and health practice: a study at quarry site by using hirarc form. In: Occupational Safety and Health - Case Study. Penerbit UTHM, pp. 1-20. ISBN 978-967-2916-31-4

Victor Subinon, Olivia Calesta and Rosman, Nurul Farah Izzati and Mohd Joharudin, Nurul Farahin and Khalid, Amir and Jaat, Norrizam and Sapit, Azwan and Noranai, Zamri (2020) Occupational safety and health practice: a study at universities’ laboratories. In: Occupational Safety and Health - Case Study. Penerbit UTHM, pp. 43-58. ISBN 978-967-2916-31-4

Zainal, Helmi Faidzi and Vico Francis, Brandon and Khalid, Amir and Hushim, Mohd Faisal and Ngadiron, Zuraidah (2020) Research on mixture motion and combustion chamber of internal combustion engine. In: Fuel, Automotive and Engine Technology. Penerbit UTHM, pp. 83-94. ISBN 978-967-2916-32-1

Zainal, Rabi’atulawwaliah and Saiful Azam, Syafiqah Ruqaiyah and Khalid, Amir and Jaat, Norrizam and Amirnordin, Shahrin Hisham (2020) Identifying of the fuel-air mixing, mixture formation, ignition and combustion characteristic in the combustion chamber. In: Fuel, Automotive and Engine Technology. Penerbit UTHM, pp. 63-72. ISBN 978-967-2916-32-1

Zulhazmi, Ammar Naim and Azlan, Adi Maisur Aflah and Khalid, Amir and Mustaffa, Norrizal and Sulaiman, Syabillah and Razali, Azahari (2020) Effect of bio fuel on performance and emissions of spark ignition and compression ignition engines by running on a variety of bio-fuels. In: Fuel, Automotive and Engine Technology. Penerbit UTHM, pp. 23-30. ISBN 978-967-2916-32-1

Zulkifli, Muhammad Farez Najmi and Bong, Leo and Mohd Yaacob, Nur Syuhada and Yap, Alycia Ching Hui and San, Chin Whay and Mahmood, Salwa and Mohamed, Norirda (2020) Improvement on work measurement at Pau Mira Frozen Food Industry. In: Manufacturing Management and Improvement. Penerbit UTHM, pp. 58-71. ISBN 978-967-2389-59-0

Conference or Workshop Item

Hehsan, Haffidzudin and Nordin, Muhammad Alif Haziq (2020) Design improvement of toner cartridge using design for assembly method. In: Progress in Engineering Application and Technology, 22 Jun 2021, UTHM. (Submitted)

Mustaffa, Norrizal and Karjanto, Juffrizal and Md. Yusof, Nidzamuddin and Terken, Jacques and Frank, Delbressine and Matthias, Rauterberg (2020) Comparative evaluation of two peripheral information systems using motion sickness subjective rating. In: Proceedings of Mechanical Engineering Research Day 2020, 16 December 2020., Melaka, Malaysia. (Submitted)

Sahat, Muhammad Asyraf and Jamian, Rahim and Abdul Shukor, Jum’azulhisham (2020) The adoption of poka-yoke mechanism towards reducing the incident of un-lifted side stand of motorcycle. In: Progress in Engineering Application and Technology, 22 Jun 2021, UTHM. (Submitted)