Items where Subject is "T Technology > TJ Mechanical engineering and machinery > TJ255-265 Heat engines"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type
Jump to: A | D | G | H | K | M | N | S | W | Y
Number of items at this level: 21.

A

Abdullah, Aslam (2018) Formulation of low peclet number based grid expansion factor for the solution of the convection-diffusion equation. Engineering, Technology & Applied Science Research, 8 (2). pp. 2680-2684. ISSN 1792-8036

Alfan, Norman Hafizi (2013) Analysis of characteristic heat pipe as an efficient cooling heat transfer device. Masters thesis, Universiti Tun Hussein Malaysia.

Alsabery, Ammar I. and Tayebi, Tahar and Roslan, Rozaini and Chamkha, Ali J. and Hashim, Ishak (2020) Entropy generation and mixed convection flow inside a wavy-walled enclosure containing a rotating solid cylinder and a heat source. Entropy, 22 (6). pp. 1-20. ISSN 1099-4300

D

Daud, Nur Atiqah (2014) Modelling and control of heat exchanger by using bio-inspired algorithm. Masters thesis, Universiti Tun Hussein Onn Malaysia.

G

Ghitheeth, Ali H. and Fawzi, Mas and Wahhab Aljibory, Mohammed (2020) Experimental study of heat transfer enhancement by inserting metal chain in heat exchanger tube. In: 3rd edition of the International Conference on Research in Science, Engineering and Technology, 28–30 October 2020, Madrid, Spain.

Ghitheeth, Ali Hussein (2021) Thermal performance enhancement of a heat exchanger using metal chain as a novel turbulator. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

H

Hassan, Ibnu Anas (2017) The experimental study and numerical simulation of falling liquid film flow on horizontal tubes. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hayder, Ali Mohammed (2014) Numerical study of jet impingement cooling on a smooth curve surface. Masters thesis, Universiti Tun Hussein Onn Malaysia.

K

K. Ajeel, Raheem and W. Salim, W.S.-I and Hasnan, Khalid (2019) Influences of geometrical parameters on the heat transfer characteristics through symmetry trapezoidal-corrugated channel using SiO2-water nanofluid. International Communications in Heat and Mass Transfer, 101. pp. 1-9. ISSN 0735-1933

M

Madon, Rais Hanizam and Mas Fawzi, Mas Fawzi and Sarwani, Muhamad Khairul Ilman and Osman, S.A. and Razali, Mohd Azahari and Mohammad, Abdul Wahab (2018) Effect of reaction temperature on steam methane reforming’s yield over coated nickel aluminide (Ni3Al) catalyst in micro reactor. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 50 (2). pp. 170-177. ISSN 2289-7879

Mat Muhammad, Mohd Hanif and Mamat, Aman Mohd Ihsan and Wan Salim, Wan Saiful-Islam (2018) Exergy analysis of organic rankine cycle and electric turbo compounding for waste heat recovery. International Journal of Engineering and Technology, 7 (3.11). pp. 152-156. ISSN 2227-524X

Md Seri, Suzairin and Amirnordin, Shahrin Hisham and Woon, Qiu Yik and Hissein Didane, Djamal (2015) Effects of geometrical parameters to the performance of louvered fin heat exchangers. Applied Mechanics and Materials, 773-77. p. 398. ISSN 1660-9336

Mohmd Arifin, Nabila Afif (2012) Finite element simulation of machining AISI 1045 steel using uncoated carbide tool. Masters thesis, Universiti Tun Hussein Malaysia.

Mohmd Arifin, Nabila Afif (2012) Finite element simulation of machining AISI 1045 steel using uncoated carbide tool. Masters thesis, Universiti Tun Hussein Malaysia.

Mustapa, Mohammad Sukri and Abdul Latif, Noradila and Mohd Joharudin, Nurul Farahin and Mahzan, Shahruddin and Masirin, Mohd Idrus and Abdul Hamid, Norashikin (2018) The effect of heat treatment on compression strength of recycled AA6061 aluminium chips. Materials Science Forum, 934. pp. 124-128. ISSN 1662-9752

N

Nor Salim, Nor Adrian (2012) Pengaruh geometri mekanisme jet denyut terhadap kadar pemindahan haba. Masters thesis, Universiti Kebangsaan Malaysia.

Nor Salim, Nor Adrian (2012) Pengaruh geometri mekanisme jet denyut terhadap kadar pemindahan haba. Masters thesis, Univeristi Kebangsaan Malaysia.

S

Sadikin, A. and Khian, N. Y. and Hwey, Y. P. and Al-Mahdi, H. Y. and Taib, I. and Sadikin, A. N. and Md Salleh, S. and Ayop, S. S. (2018) Effect of number of baffles on flow and pressure drop in a shell side of a shell and tube heat exchangers. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 48 (2). pp. 156-164. ISSN 2289-7879

Suardi, Mirnah (2015) Rapid premixing fuel-water injector in burner combustion. Masters thesis, Universiti Tun Hussein Onn Malaysia.

W

Wan Mansor, Wan Nurdiyana (2006) Design of heat exhanger network using pinch method. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Y

Yahaya, Mohd Zubir (2013) Evaluation of heat exchanger on thermoacoustic performance. Masters thesis, Universiti Tun Hussein Malaysia.

This list was generated on Wed Jun 29 06:30:25 2022 +08.