Items where Subject is "T Technology > TL Motor vehicles. Aeronautics. Astronautics > TL500-777 Aeronautics. Aeronautical engineering"

Article

Abdullah, Aslam and Roslan, Amirul Aizad and Omar, Zamri (2018) Comparative study of turbulent incompressible flow past naca airfoils. ARPN Journal of Engineering and Applied Sciences, 13 (21). pp. 8527-8530. ISSN 1819-6608

Abdullah, Aslam and Suresh, Surendran and Mohd Saleh, Siti Juita Mastura and Zulkafli, Mohd Fadhli and Abdul Ghafir, Mohammad Fahmi (2019) Numerical study of the flow over symmetrical airfoils with ground effects. International Journal of Mechanical Engineering and Technology (IJMET), 10 (4). pp. 1106-1113. ISSN 0976-6340

Abo Mosali, Najmaddin and Shamsudin, Syariful Syafiq and Alfandi, Omar and Omar, Rosli and AL-Fadhali, Najib (2022) Twin delayed deep deterministic policy gradient-based target tracking for unmanned aerial vehicle with achievement rewarding and multistage training. IEEE Access, 10. pp. 23545-23559. ISSN 2169-3536

Abobaker, Mostafa and M. Elfaghi, Abdulhafid and Addeep, Sogair (2020) Numerical study of wind-tunnel wall effects on lift and drag characteristics of NACA 0012 airfoil. CFD Letters, 12 (11). pp. 72-82. ISSN 2180-1363

Che Ibrahim, Che Intan Hartini and Abdullah, Aslam (2020) Flow topology around low reynolds number airfoils with vortex shedding. CFD Letters, 12 (12). pp. 85-103. ISSN 2180-1363

Fairolazizi, Muhammad Aiman Zhafran and Rosly, Nurhayati and Jabbar, Balasem Abdulameer (2019) Operational readiness and airport transfer (ORAT) of Kuala Lumpur air traffic control centre (KL ATCC). Journal of Aviation and Aerospace Technology, 1 (2). pp. 1-5. ISSN 2682-7433

Hadi, Muhammad Irfan and Nazri, Mohd. and Abdullah, Aslam (2020) Vortex formation in unsteady flow over NACA 4412 and NACA 4424 airfoils. ARPN Journal of Engineering and Applied Sciences, 15 (1). pp. 27-33. ISSN 1819-6608

Isa, Khairunesa and Wan Muda, Wan Hanim Nadrah and Paim, Laily and Alavi, Khadijah and Md Shah, Jalihah and Jamil, Nor Aisah (2020) Construct validity and reliability of Malaysian academician happiness index: a rasch model approach for pilot study. International Journal of Psychosocial Rehabilitation, 24 (8). pp. 5163-5178. ISSN 1475-7192

Law, Mohd Syafiq Aidil and Ariffin, Ahmad Hamdan (2020) A review on the aerodrome standard in the aviation industry. Journal of Aviation and Aerospace Technology, 2 (2). pp. 1-4.

Mohammad Azizi, Mohammad Khairul Fadhli and Mohd Saleh, Siti Juita Mastura and Mohanad Al-Ghriybah, Mohanad Al-Ghriybah (2019) Optimization of bow and arrow design subject to aerodynamic characteristics. Journal of Aviation and Aerospace Technology, 1 (2). pp. 1-7.

Mohd Nizam, Muhammad Syazaamirul and Rosly, Nurhayati (2019) The development of flight training operation for Tanjung Laboh airport. Journal of Aviation and Aerospace Technology, 1 (2). pp. 1-9. ISSN 2682-7433

Omar, Rosli and Sabudin, E. N and C. K., Che Ku Melor and A., N. H (2016) Potential field methods and their inherent approaches for path planning. ARPN Journal of Engineering and Applied Sciences, 11 (18). pp. 10801-10805. ISSN 1819-6608

Sadikin, Azmahani and Mohd Yunus, Nurul Akma and Abd Hamid, Saiful Anuar and Ismail, Al Emran and Salleh, Salihatun and Ahmad, Sufizar and Abdol Rahman, Mohd Nasrull and Mahzan, Shahruddin and Ayop, Sallehuddin Shah (2018) A comparative study of turbulence models on aerodynamics characteristics of a NACA0012 airfoil. International Journal of Integrated Engineering, 10 (1). pp. 134-137. ISSN 2229-838X

Sikien, Esther Rami and Abdullah, Aslam and Zulkafli, Mohd Fadhli and Rahim, Mohammad Zulafif (2018) The effects of vortex shedding on the aerodynamic performance of airfoils. ARPN Journal of Engineering and Applied Sciences, 13 (24). pp. 9344-9351. ISSN 1819-6608

Book Section

Abdullah, Aslam (2020) On three classes of mesh for the solution of a singularly perturbed two-point boundary value problem. In: Advances in Mechanical, Manufacturing and Aerospace Engineering. Penerbit UTHM, pp. 115-132. ISBN 978-967-2916-56-7

Achmad, Zainun and Ismail, Al Emran (2020) Experimental study of fatigue age on SUP-9 leaf spring steel which received heat treatment and shot peening processes. In: Advances in Mechanical, Manufacturing and Aerospace Engineering. Penerbit UTHM, pp. 1-15. ISBN 978-967-2916-56-7

Ariffin, Ahmad Hamdan and Yaakub, Mohd Fauzi (2020) A review on aviation restructuring action to survive in COVID-19 challenges: Malaysia perspective. In: Advances in Mechanical, Manufacturing and Aerospace Engineering. Penerbit UTHM, pp. 16-26. ISBN 978-967-2916-56-7

Baharudin, Muhammad Azzrul Ashraff and Didane, Djamal Hissein and Batcha, Mohd Faizal Mohideen and Abdullah, Kamil and Mohammed, Akmal Nizam and ., Mas Fawzi (2020) CFD simulation study of multistage vertical axis wind turbine (VAWT). In: Advances in Mechanical, Manufacturing and Aerospace Engineering. Penerbit UTHM, pp. 47-60. ISBN 978-967-2916-56-7

Che Saad, Muhammad Adib and Mohideen Batcha, Mohd Faizal and Razali, Mohd Azahari and Abdul Rahman, Ramhuzaini and Ahmad Nazri, Mohd Ariff and Lam, Hong Yin and Ishak, Maizul and Yusop, Azli (2020) Development of an aquaponic system using ablution greywater for recreational purpose. In: Advances in Mechanical, Manufacturing and Aerospace Engineering. Penerbit UTHM, pp. 61-73. ISBN 978-967-2916-56-7

Isa, Noor Amira and Ahmad Bareduan, Salleh (2020) Methodology to develop bottleneck-based heuristic for permutation flow shop scheduling. In: Advances in Mechanical, Manufacturing and Aerospace Engineering. Penerbit UTHM, pp. 98-114. ISBN 978-967-2916-56-7

Kamdi, Zakiah (2020) Plasma transfer arc welding (PTAW) for depositing tungsten carbide-nickel cermet coating for corrosion. In: Advances in Mechanical, Manufacturing and Aerospace Engineering. Penerbit UTHM, pp. 145-163. ISBN 978-967-2916-56-7

MD Zin, Muhammad Fariq and Didane, Djamal Hissein and Ogab, Mohammed and M Elfaghi, Abdulhafid and Afolabi, Lukmon Owolabi (2020) Performance evaluation of a counter-rotating vertical axis wind turbine (VAWT) on a moving train. In: Advances in Mechanical, Manufacturing and Aerospace Engineering. Penerbit UTHM, pp. 133-144. ISBN 978-967-2916-56-7

Mohd Joharudin, Nurul Farahin and Abdul Latif, Noradila and Mustapa, Mohammad Sukri and Badarulzaman, Nur Azam and Supawi, Aiman (2020) Mechanical properties of AA7075 aluminium chip reinforced rice husk silica by solid state technique. In: Advances in Mechanical, Manufacturing and Aerospace Engineering. Penerbit UTHM, pp. 74-97. ISBN 978-967-2916-56-7

O. Afolabia, Lukmon and M. A. Elfaghia, Abdulhafid and Didane, Djamal Hissein and Ismail, Al Emran and Mat Isa, Norasikin (2020) Assessment of thermal energy storage integrated solar thermal collector system: a review. In: Advances in Mechanical, Manufacturing and Aerospace Engineering. Penerbit UTHM, pp. 27-46. ISBN 978-967-2916-56-7

Thesis

Ahmad Alaian, Ahmad Eshtiwey (2016) The development of a fixed wing aircraft analysis and design flight dynamic software. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ahmed, Mohammed (2019) Nonlinear robust control of functional electrical stimulation system for paraplegia. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Al Aian, Ahmad Eshtiwey (2011) The aerodynamics analysis of type UAV aircraft with pusher engine configuration by use of DATCOM software. Masters thesis, Universiti Tun Hussein Malaysia.

Al-Ghriybah, Mohanad (2020) Aerodynamic performance evaluation of multi inner blades savonius rotor. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Hariri, Azian (2009) Conceptual design of a small non-rigid airship with particular attention to its static and dynamic stability. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Khaire Elarosi, Muwfik Faidi (2013) On the development computer, code for determinig the root of equation for transient flight analysis. Masters thesis, Universiti Tun Hussein Malaysia.

M Khalifa, Tarek M. (2012) The flight trajectory analysis on the existing aircraft. Masters thesis, Universiti Tun Hussein Malaysia.

M Mohammed, Abdelrazzak Gumaa (2011) The application of combined momentum and blade element theory for aerodynamics performance analysis of rotating blades. Masters thesis, Universiti Tun Hussein Malaysia.

M. Elkamel, Hasan Taher (2017) The development of reynolds averaged navier stokes solver for a two dimensional compressible flow problem. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mohamed Alazomui, Outman (2014) On the development of computer code for aircraft flight dynamics analysis. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Yunos, Siti Nur Mariani (2011) Performance characteristics monitoring of turboprop engine for the development of preliminary requirement of an engine testing facility. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Noh @ Seth, Nur Hazirah (2016) Parametric study on the design of baffle for three-dimensional turning diffuser. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Omar, Rosli (2011) Path planning for unmanned aerial vehicles using visibility line-based methods. Doctoral thesis, University of Leicester.

Pairan, Mohammad Fahmi (2018) Real-time identification of an unmanned quadcopter flight dynamics using fully tuned radial basis function network. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Yaakub, Mohd Fauzi (2011) The effect of vortex trap on helicopter blade lift. Masters thesis, Universiti Tun Hussein Malaysia.