Items where Year is 2005

A

A. Jalil @ Zainuddin, Mohd Hafiz (2005) Application of microwave in wood tomography. Masters thesis, Universiti Teknologi Malaysia.

A.Hamid, Isredza Rahmi (2005) Comparative study on RFID, hotspot and car plate scanning method : for intelligent parking management system. Masters thesis, Universiti Teknologi MARA.

Abd. Rahim, Erween (2005) Performance evaluation of uncoated and coated carbide tools when drilling titanium alloy. Masters thesis, Universiti Teknologi Malaysia.

Abd. Rahman, Norashidah (2005) Static strength of tubular DT joints using lusas finite element software. Masters thesis, Universiti Teknologi Malaysia.

Abdul Hamid, Noor Azlina (2005) The use of horizontal and inclined bars as shear reinforcement. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Hamid, Noor Azlina (2005) The use of horizontal and inclined bars as shear reinforcement. Masters thesis, Universiti Teknologi Malaysia.

Abdul Hamid, Nor Aziati (2005) The relative importance of trust and usable website design in building e-loyalty intention on internet banking : a case of Maybank2U.com. Masters thesis, Universiti Teknologi Malaysia.

Abdul Kadir, Herdawatie (2005) Modelling and control of a balancing robot using digital state space approach. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Kadir, Herdawatie (2005) Modelling and control of a balancing robot using digital state space approach. Masters thesis, Universiti Teknologi Malaysia.

Abdul Sukor, Nur Sabahiah (2005) Evaluation of laboratory compactive effort on asphaltic concrete mixes. Masters thesis, Universiti Teknologi Malaysia.

Abdul Sukor, Nur Sabahiah (2005) Evaluation of laboratory compactive effort on asphaltic concrete mixes. Masters thesis, Universiti Teknologi Malaysia.

Abdul Wahab, Fauzi (2005) Simulation studies of 30 MHz phase-locked loop coherent receiver. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Abdullah, Mohd Ezree (2005) Level of service (LOS) for multilane highway and road accident information system development of Batu Pahat area. Masters thesis, Universiti Teknologi Malaysia.

Abdullah, Moho Ezree (2005) Level of service (LOS) for multilane highway and road accident information system development of Batu Pahat area. Masters thesis, Universiti Teknologi Malaysia.

Abdullah, Noorsaliza (2005) Microstrip sierpinski carpet antenna design. Masters thesis, Universiti Teknologi Malaysia.

Abdurahman, Mohamad Nizar (2005) Short term performance evaluation of a rural road embankment with different reinforcement constructed on soft soil pertaining to vertical settlement. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Abdurahman, Mohamad Nizar (2005) Short term performance evaluation of a rural road embankment with different reinforcement constructed on soft soil pertaining to vertical settlement. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Abu Talib, Zaihasra (2005) Compressibilty and Young's modulus of filled joint. Masters thesis, Universiti Teknologi Malaysia.

Ahmad, Nabihah @ Nornabihah (2005) FPGA prototyping of universal asynchronous receiver-transmitter (UART) using altera VHDL implementation. Masters thesis, Kolej Universiti Tun Hussein Onn Malaysia.

Ahmad, Nabihah @ Nornabihah (2005) FPGA prototyping of universal asynchronous receiver-transmitter (UART) using altera VHDL implementation. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Arbaiy, Nureize (2005) Pest activity prognosis in rice fields using fuzzy expert system approach. Masters thesis, Universiti Tun Hussein Onn Malaysia.

B

Basharie, Siti Mariam (2005) Performance modelling of refrigerants in a vapor compression refrigeration cycle. Masters thesis, Universiti Teknologi Malaysia.

C

Chew, Chang Choon (2005) Distributed processing of MPEG-2 video encoding on microsoft windows platform. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

D

Dahlan, Samsul Haimi (2005) Compact microwave hairpin line band pass filter using folded quarter-wave resonator. Masters thesis, Universiti Teknologi Malaysia.

I

Ibrahim, Mohd Halim Irwan (2005) The effect of buckling in FRP members. Masters thesis, Universiti Teknologi Malaysia.

Ihkasan, Mohd Nor (2005) Pembangunan staf untuk pengintegrasian e-pembelajaran di politeknik. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Isa, Khalid (2005) Vision-based autonomous vehicle driving control system. Masters thesis, Universiti Putra Malaysia.

J

Jaafar, Mohd Kamal (2005) Short-term statistical analysis of the occurrence of the F3 layer in Malaysian ionosphere for winter 2004. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Jaafar, Mohd Kamal (2005) Short-term statistical analysis of the occurrence of the f3 layer in Malaysian ionosphere for winter 2004. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Jalani, Jamaludin (2005) Control strategies for automatic gantry crane system. Masters thesis, International Islamic University Malaysia.

Jamellodin, Zalipah (2005) Kegagalan struktur bumbung disebabkan oleh beban angin. Masters thesis, Universiti Teknologi Malaysia.

Jamellodin, Zalipah (2005) Kegagalan struktur bumbung disebabkan oleh beban angin. Masters thesis, Universiti Teknologi Malaysia.

Joret, Ariffuddin (2005) Sistem pintar pengecaman bentuk agregat berasaskan rangkaian neural. Masters thesis, Universiti Sains Malaysia.

K

Kamaludin, Hazalila (2005) GPRS technology awareness and the interest towards position aware services. Masters thesis, Universiti Teknologi MARA.

Kamardan, Muhammad Ghazali (2005) Pembaikan sistem kriptografi multi RSA. Masters thesis, Universiti Kebangsaan Malaysia.

Kamardan, Muhammad Ghazali (2005) Pembaikan sistem kriptografi multi RSA. Masters thesis, Universiti Kebangsaan Malaysia.

Kamdani, Kamaruddin (2005) Influence of preheating on chatter and machinability of titanium alloy - Ti6A14V. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Kamdani, Kamaruddin (2005) Influence of preheating on chatter and machinability of titanium alloy-Ti6A14V. Masters thesis, International Islamic University Malaysia.

Khamidi, Mohd. Faris (2005) Dry-masonry Brick House System as an "Adaptable Building" Model for Asian Markets. Doctoral thesis, Kyushu University.

Kho, Yeh Yiian (2005) Web-based interface system for bedside monitor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Kho, Yeh Yuan (2005) Web-based interface system for bedside monitor. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

L

Lim, Johnson Soon Chong and Md Yunos, Jailani and Spahat, Ghazally (2005) The development and evaluation of an e-module for pneumatics technology. Malaysian Online Journal of Instructional Technology, 2 (3). pp. 25-33. ISSN 1823-1144

M

Mahamad, Abd Kadir (2005) Monitoring and prediction of bearing failure by acoustic emission and neural network. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Manshoor, Bukhari (2005) Incompressible flow simulation using S.I.M.P.L.E method on parallel computer. Masters thesis, Universiti Teknologi Malaysia.

Mansor, Mohamad Norani (2005) An improvement to integrated model of electro pneumatic circuit for material handling in a manufacturing cell. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mat Jubadi, Warsuzarina (2005) Embedded TCP/IP in sensor nodes (sensornets). Masters thesis, Universiti Teknologi Malaysia.

Md Jalil, Mohd Azlis Sani (2005) Development of Al-Cu-SiCp metal matrix composite for automotive applications. Masters thesis, Universiti Malaya.

Md Zain, Mohd Zahiruddin (2005) Influence of electrical parameters and optimization of EDM performance measures on Ti-6A1-4V using DOE/TAGUCHI method. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Md.Kasmani, Ruhaila (2005) A comparison of numerical methods for solving the bratu and bratu-type problems. Masters thesis, Universiti Teknologi Malaysia.

Mohamad, Elmy Johana (2005) Flame imaging using laser - based transmission tomography. Masters thesis, Universiti Teknologi Malaysia.

Mohamad, Elmy Johana (2005) Flame imaging using laser - based transmission tomography. Masters thesis, Universiti Teknologi Malaysia.

Mohamed Sunar, Norshuhaila (2005) Kajian terhadap kualiti air bag i sistem pengumpulan air hujan menggunakan penapis biopasir. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mohamed Sunar, Norshuhaila (2005) Kajian terhadap kualiti air bagi sistem pengumpulan air hujan menggunakan penapis biopasir. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mohd Ali, Ahmad Zurisman (2005) The effect of eccentricity at beam support to beam stiffness. Masters thesis, Universiti Teknologi Malaysia.

Mohd Kiblee, Shahizul Eza (2005) Lane detection system for autonomous vehicle using image processing techniques. Masters thesis, Universiti Putra Malaysia.

Mohd Salikon, Mohd Zaki (2005) Examination timetabling using genetic algorithm case study: KUiTTHO. Masters thesis, Universiti Utara Malaysia.

Mohd Salikon, Mohd Zaki (2005) Examination timetabling usinggenetic algorithm case study: KUiTTHO. Masters thesis, Universiti Utara Malaysia.

Mohd Zin, Nur Shaylinda (2005) Decolourisation of dye solution containing azo acid orange 7 by electricity. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Zin, Nur Shaylinda (2005) Decolourisation of dye solution containing azo acid orange 7 by electricity. Masters thesis, Universiti Teknologi Malaysia.

Mohd Zin, Rosnah (2005) Analysis of FPGA design methods using AN 8 BIT ALU. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mohmad Jaat, Md. Norrizam (2005) The application of energy analysis on an educational steam power plant. Masters thesis, Universiti Teknologi Malaysia.

Muhamad Tarmidi, Mahvidayanti (2005) The effect of bitumen rheology to the permanent deformation of an asphalt concrete mixture. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Muhamad Tarmidi, Mahvidayanti (2005) The effect of bitumen rheology to the permanent deformation of an asphalt concrete mixture. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Murli, Norhanifah (2005) Evaluation of video streaming quality using quicktime streaming server (QTSS): a case study in Faculty of Information Technology & Quantitative Sciences, UiTM. Masters thesis, Universiti Teknologi MARA.

N

Ngadengon @ Ngadungon, Rafidah (2005) A full order sliding mode tracking controller design for an electrohydraulic control system. Masters thesis, Universiti Teknologi Malaysia.

Ngali, Mohd Zamani (2005) Solution to navier-stokes equation in stretched coordinate system. Masters thesis, Universiti Teknologi Malaysia.

Ngali, Mohd Zamani (2005) Solution to navier-stokes equation in stretched coordinate system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

O

Othman, Muhaini (2005) Faculty's used books e-platform. Masters thesis, Universiti Malaya.

Othman, Safiah (2005) A numerical study of transient natural convection of water near its density extremum. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Othman, Safiah (2005) A numerical study of transient natural convection of water near its density extremum. Masters thesis, University of Strathclyde.

Othman, Zulhairi (2005) Comparison of RLL, state diagram, grafcet and petri net for the realization of logic controller. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

P

Pang, Shen Yee (2005) An experimental verification of the binary method for three-phase voltage source inverter. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Ponniran, Asmarashid (2005) Study on the performance of underground XPLE cables in service based on Tan Delta and capacitance parameters. Masters thesis, Universiti Teknologi Malaysia.

Puteh, Fadilah (2005) Pendidikan berterusan dalam peningkatan kompetensi di kalangan profesional organisasi : kajian kes di KUiTTHO. Masters thesis, Universiti Teknologi Malaysia.

Puteh, Fadilah (2005) Pendidikan berterusan dalam peningkatan kompetensi di kalangan profesional organisasi: Kajian kes di KUiTTHO. Masters thesis, Universiti Teknologi Malaysia.

R

Rahmat, Siti Nazahiyah (2005) Modeling of non point source pollution from residental and commercial catchments in Skudai, Johor. Masters thesis, Universiti Teknologi Malaysia.

Ramlan, Rohaizan (2005) Penilaian kaedah laluan terpendek: rangkaian jalan raya kajian kes: Negeri Johor dan Melaka. Masters thesis, Universiti Teknologi Malaysia.

Ramlan, Rohaizan (2005) Penilaian kaedah laluan terpendek:rangkaian jalan raya kajian kes: Negeri Johor Dan Melaka. Masters thesis, Universiti Teknologi Malaysia.

Ridzuan, Mohd Baharudin (2005) Pengolahan kandungan logam berat daripada tanah yang diaplikasi dengan enapcemar domestik melalui kaedah tanah pertanian. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Ridzuan, Mohd Baharudin (2005) Pengolahan kandungan logam berat daripada tanah yang diaplikasi dengan enapcemar domestik melalui kaedah tanah pertanian. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Rusin, Siti Ruzaimah (2005) CIM control design using grafcet. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

S

Sanudin, Rahmat (2005) Characterisation of ballistic carbon nanotube field-effect transistor. Masters thesis, Universiti Teknologi Malaysia.

Sanudin, Rahmat (2005) Characterisation of ballistic carbon nanotube field-effect transistor. Masters thesis, Universiti Teknologi Malaysia.

Shamsudin, Shazarel (2005) Development of the process planning for machining prismatic parts. Masters thesis, Universiti Putra Malaysia.

Sulong, Muhammad Suhaimi (2005) Pencirian elektrik dan bahan bagi peranti CMOS 0.15 mikron. Masters thesis, Universiti Kebangsaan Malaysia.

Syed Mohamad, Syed Burhanuddin Hilmi (2005) Corrosion assessment on reinforced concrete and its service life prediction. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Syed Mohamad, Syed Burhanuddin Hilmi (2005) Corrosion assessment on reinforced concrete and its service life prediction. Masters thesis, Universiti Putra Malaysia.

Y

Yaacob, Zaihar (2005) Successive over relaxation technique for steady state and dynamic characteristics of a cylindrical bore bearing. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Yahya, Mohd Shahir (2005) Designing of public vehicle driver's seat. Masters thesis, Universiti Putra Malaysia.

Z

Zakaria, Muhammad Nizam (2005) A study on non-friction contact problem with large deformational analyses. Masters thesis, Saga University.

Zaman @ Bujang, Izzuddin (2005) Study of dynamic behaviour of truck chassis. Masters thesis, Universiti Teknologi Malaysia.

Zohari, Mohd Hakimi (2005) Kajian keberkesanan penggunaan ethernet dalam sistem pengautomatan pencawang. Masters thesis, Universiti Kebangsaan Malaysia.

Zulkifli, Shamsul Aizam (2005) Simulation of linear feedback control of D-STATCOM for voltage sag mitigation. Masters thesis, Universiti Putra Malaysia.