Items where Division is "Faculty of Mechanical and Manufacturing Engineering > Department of Mechanical Engineering" and Year is 2018

Ab Kadir, Muhammad Irfan (2018) The effect of silicon carbide (SiC) on physical and mechanical properties of recycled aluminium chip AA6061. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ab Kadir, Muhammad Irfan and Mustapa, Mohammad Sukri and Rosli, Nurul Liyana and Yahya, Mohd Shahir and Mohamad, Mahmod Abd Hakim and Abd Rahim, Abd Khalil (2018) The effect of microstructures and hardness characteristics of recycling aluminium chip aa6061/al powder on various sintering temperatures. International Journal of Integrated Engineering, 10 (3). pp. 53-56. ISSN 2600-7916

Ab Manaf, Nur Suliani (2018) Fabrication and characterisation of Cobalt Chromium Molybdenum (CoCrMo) foams using slurry method. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abbas, Mohammed Saad and Sapit, Azwan and Balla, Hyder Hassan Abd and Haider, Ali Mohammed and Al-Shamani, Ali Najah (2018) A review study on the effect of glass envelope, working fluid and geometry contributions for the receiver on performance of parabolic trough collector (PTC). ARPN Journal of Engineering and Applied Sciences, 13 (20). pp. 8200-8211. ISSN 1819-6608

Abd Karim, Muhammad Aizat (2018) An approach of using polymer natural fiber composite for vibration and flammability control. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abd Wahab, Hanani and Mohd Rus, Anika Zafiah and Zaliran, M. Taufiq (2018) Design of experiment for in-situ synthesis of waste vegetable oils and synthetic based polyurethane (PU) foam composites. International Journal of Engineering & Technology, 7 (4.34). pp. 413-416. ISSN 2227-524X

Abdul Rahman, Syahrul Aziana (2018) The development of entire body risk asssessment (ENBORA) method for work related musculoskeletal disorders (WMSDs). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Sani, Amiril Sahab (2018) Study on the application of ionic liquids in bio-based lubricant for a sustainable machining process. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Abdullah, Kamil and Mohamad, Mohd Hafiz (2018) Building energy performance a case study at G2 Building UTHM. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 50 (2). pp. 161-169. ISSN 2289-7879

Ahmad, Azlinnorazia (2018) Development of in situ synthesis of silver polysulfone membrane for water separation. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad Fara, Ahmad Norman Khalis (2018) Preparation and characterization of natural hydroxyapatite from tilapia bones and scales for biomedical applications. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad Nordin, Mohd Nor Azmi (2018) The evaluation of acoustic characteristic performance on natural sound absorbing materials from cogon grass waste. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad Zuhaidi, Muhammad Fareez (2018) Assessment of ergonomics risk factor associated with upper limb disorders among cashiers in grocery retail industries. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ainul, H. M. Y. and Salleh, S. M. and Halib, N. and Taib, H. and Fathi, M. S. (2018) Analysis of toothbrush rig parameter estimation using different model orders in Real-Coded Genetic Algorithm (RCGA). International Journal of Engineering and Technology, 7 (4.3). pp. 443-447. ISSN 2227-524X

Ajeel, Raheem K. and W. Salim, W.S-I. and Hasnan, Khalid (2018) Thermal and hydraulic characteristics of turbulent nanofluids flow in trapezoidal-corrugated channel: Symmetry and zigzag shaped. Case Studies in Thermal Engineering, 12. pp. 620-635. ISSN 2214-157X

Ajeel Aljebur, Raheem Kadhim and Wan Salim, Wan Saiful-Islam and Hasnan, Khalid (2018) Impacts of corrugation profiles on the flow and heat transfer characteristics in trapezoidal corrugated channel using nanofluids. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 49 (2). pp. 170-179. ISSN 2289-7879

Ali, Mohamad Hanafi and Azmir, Nor Azali and Yahya, Musli Nizam (2018) Prediction on hand arm vibration exposure cause-effect among grass-cutting workers in Malaysia. Advanced Science Letters, 7 (3.24). pp. 48-54. ISSN 2227-524X

Anuar, Fatin Farhana and Md Zain, Badrul Aisham and Al-Shaibani, Najib (2018) Comparative study on flexible link aerator using arduino programming and dissolved oxygen meter. International Journal of Integrated Engineering, 10 (4). pp. 1-5. ISSN 2600-7916

Azmi, Mohd Azham (2018) Fabrication, characterisation and properties of polysiloxane rice husk silica composites. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Che Berhanuddin, Nurul Idani (2018) Investigation the effect of expanded graphite modification on tensile properties and adhesive of epoxy composite. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Che Mohd Husin, Mohd Faizal (2018) A new direct viscous-inviscid interaction method for aerodynamics analysis. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Chen, Wong Keong (2018) Machining feature-based system for supporting step-compliant milling process. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Chung, She Man and Weily, Khoo and Lim, Shing Chee and Zakaria, Mohd Faiz and Koh, Ching Theng (2018) Strategy on the production of bead free electrospun gelatin scaffolds. Journal of Mechanical Engineering, 5 (6). pp. 69-79. ISSN 2550-164X

Ee, Soong Low and Pauline, Ong and Cheng, Yee Low (2018) Mobile robot path planning using q-learning with guided Distance. International Journal of Engineering & Technology, 7 (4.27). pp. 57-62. ISSN 2227-524X

Elfallah, Saleh S Saleh (2018) Study on the performance enhancement of biomedical implants: in vitro test under UV irradiation of titanium anodised in mixed electrolyte. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Elteriki, Salem Abdulsalam (2018) Hybrid artificial bee colony algorithm with branch and bound for two–sided assembly line balancing. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Elwalwal, Hatem Mostafa (2018) Detection of multiple defects based on structural health monitoring of pipeline using guided waves technique. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Eng, Pei Ying (2018) Evaluation of the performance of granular fertilizer boom sprayer through computational fluid-particles-dynamid CFD simulation and scaled-down model analysis. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Farag Elghanudi, Muheieddin Meftah (2018) Implementation of vibration-based structural health monitoring technique for identification of simulated corrosion damage in steel pipeline using neural network. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Fitri, Muhamad and Mahzan, Shahruddin (2018) Influence of coupling agent and fibre treatment to mechanical properties of oil palm fibre reinforced polymer matrix composite. Journal of Mechanical Engineering, 5 (4). pp. 223-232. ISSN 1823- 5514

Hakimi, M. H. and Salleh, S. M. and Ainul, H. M. Y. and Ngali, M. Z. and Ismail, A. E. and Rahman, M. N. A. and Mahmud, W. M. A. W (2018) Ice bath therapy on athletes recovery response using EEG. International Journal of Engineering and Technology, 7 (4.3). pp. 438-442. ISSN 2227-524X

Haniff, Mohamad Fadzli and Selamat, Hazlina and Khamis, Nuraqilla and Alimin, Ahmad Jais (2018) Optimized scheduling for an airconditioning system based on indoor thermal comfort using the multiobjective improved global particle swarm optimization. Energy Efficiency, 12. pp. 1183-1201. ISSN 1570-6478

Harimon, Mohd Azhar and Miyashita, Yukio and Otsuka, Yuichi and Mutoh, Yoshiharu and Yamamoto, Shinichi (2018) High temperature fatigue characteristics of P/M and hot-forged W-Re and TZM for X-ray target of CT scanner. Materials & Design, 137. pp. 335-344. ISSN 0261-3069

Harimon, Mohd Azhar and Miyashita, Yukio and Otsuka, Yuichi and Mutoh, Yoshiharu and Yamamoto, Shinichi (2018) High temperature fatigue characteristics of P/M and hot-forgedW-Re and TZM for X-ray target of CT scanner. Materials and Design, 137. pp. 335-344. ISSN 0261-3069

Hassan, Suhaimi (2018) Micro scalar patterning for printing ultra fine solid lines in flexographic printing process. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Hassan, Suhaimi (2018) Micro scalar patterning for printing ultra fine solidlines in flexographic printing process. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Hassane, Abdelhamid Issa and Didane, Djamal Hissein and Tahir, Abakar Mahamat and Hauglustaine, Jean-Marie (2018) Wind and solar assessment in the Sahelian Zone of Chad. International Journal of Integrated Engineering, 10 (8). pp. 203-213. ISSN 2600-7916

Ismail, Al Emran and Sadikin, Azmahani and Abdol Rahman, Mohd Nasrull and Mahzan, Shahruddin and Md. Salleh, Salihatun and Ahmad, Sufizar and Ridzuan, Mohd Baharudin (2018) Crushing performances of axially compressed woven kenaf fiber reinforced cylindrical composites. International Journal of Integrated Engineering, 10 (1). pp. 189-195. ISSN 2229-838X

Ismail, Muammar Mukhsin and Mohd Ali, Mas Fawzi and Zulkifli, Fathul Hakim and Osman, Shahrul Azmir (2018) Cng-diesel dual fuel controlling concept for common rail diesel. International Journal of Integrated Engineering: Special Issue, 10 (3). pp. 88-92. ISSN 2229-838X

Ismon, Maznan and Chai, Ronnie and Ismail, Al Emran and Zainulabidin, Muhd Hafeez and Mat Noor, Fazimah and Abd Wahab, Hanani and Mohamad, Zaleha and Madlan, Mohd Amran and Zaman, Izzuddin (2018) Thermal gradient pattern of shallow pitting via active thermography-water and steam. International Journal of Integrated Engineering, 10 (1). pp. 138-141. ISSN 2229-838X

Jamali, Qadir Bakhsh (2018) Characterization of whole-body vibration for monorail passenger ride comfort. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Jamalludin, Mohd Riduan (2018) Sugarcane green ceramic hollow fibre membrane for oily wastewater separation. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Kaha, Asrizan and Taib, Ishkrizat and Paisal, Muhammad Sufyan Amir and Tajul Arifin, Ahmad Mubarak and Ismail, Al Emran and Asmuin, Norzelawati and Abdul Haq, Reazul Haq and Chatpun, Surapong and Yamamoto, Takahisa and Osman, Kahar (2018) Lumped parameter modelling in femoral popliteal artery for normal and severe conditions. International Journal of Integrated Engineering: Special issue 2018: Mechanical Engineering, 10 (5). pp. 193-203. ISSN 2229-838X

Kamarudin, Kamarul Azhar and Mohamed, Mohamed Nasrul Hatta and Anpalagan, Ranjhini and Ismail, Al Emran and Ab Baba, Noor Wahida and Mohd Noor, Mohd Khir and Abdullah, Ahmad Sufian (2018) Seashell structure under binder influence. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 46 (1). pp. 122-128. ISSN 2289-7879

Khalid, Muhammad Haziq and Abd Rahman, Ramhuzaini and Abdul Latif, Hanif and Yahya, Musli Nizam (2018) Prototyping and performance evaluation of fire rated acoustic door. International Journal of Integrated Engineering, 10 (4). pp. 6-11. ISSN 2229-838X

Kormin, S. and M. Rus, A. Z. and M. Azahari, M. S. (2018) Solvolysis liquefaction and characterization of biopolyol prepared from liquefied oil palm fruit waste. Journal of Fundamental and Applied Sciences, 10 (2S). pp. 701-721. ISSN 1112-9867

Kormin, Shaharuddin (2018) Polyurethane foam from oil palm fruit waste: synthesis and characterization of biopolyol and foam properties. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

M. Yusup, Eliza and Mahzan, Shahruddin (2018) The physical characteristics of composite bone scaffold fabricated from OPEFB-CMC, Chitosan and HA. International Journal of Mechanical Engineering and Robotics Research, 7 (5). pp. 466-470. ISSN 2315-4462

Madon, Rais Hanizam and Fawzi, Mas and Osman, Shahrul Azmir and Alimin, Ahmad Jais and Razali, Mohd Azahari and Sarwani, Muhamad Khairul Ilman and Abeden, Zulhelmy Zinil (2018) Gas Chromatography analysis of a c1-c5 hydrocarbon column. International Journal of Integrated Engineering, 10 (1). pp. 85-91. ISSN 2229-838X

Masood, Ibrahim and Hassan, Adnan (2018) Pattern recognition for bivariate process mean shifts using feature-based artificial neural network. The International Journal of Advanced Manufacturing Technology, 66. pp. 1201-1218. ISSN 0268-3768

Masrol, S.R and Ibrahim, M.H.I and Adnan, S and Abdul Raub, R and Sa’adon, A.M and Sukarno, K.I and Yusoff, M.F.H (2018) Durian rind soda-anthraquinone pulp and paper: effects of elemental chlorine-free bleaching and beating. Journal of Tropical Forest Science, 30 (1). pp. 106-116. ISSN 0128-1283

Mat Muhammad, Mohd Hanif and Mamat, Aman Mohd Ihsan and Wan Salim, Wan Saiful-Islam (2018) Exergy analysis of organic rankine cycle and electric turbo compounding for waste heat recovery. International Journal of Engineering and Technology, 7 (3.11). pp. 152-156. ISSN 2227-524X

Md Ansari, Mohamad Helmi (2018) Feasibility of waste-derived hydroxyapatite mixed with ultra high molecular weight polyethylene composites for fused deposition modeling process. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Md Ansari, Mohamad Helmi (2018) Feasibility of waste-derived hydroxyapatite mixed with ultra highm olecular weight polyethylene composites for fused deposition modeling process. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Meng, Ong Kok and Pauline, Ong and Soong, Low Ee and Kiong, Sia Chee (2018) Robotic arm system with computer vision for colour object Sorting. International Journal of Engineering & Technology, 7 (4.27). pp. 50-56. ISSN 222-7524X

Mohamad, Zaleha and Ismail, Al Emran and Zainulabidin, Muhd Hafeez and Mat Noor, Fazimah and Abd Wahab, Hanani and Ismon, Maznan and Madlan, Mohd Amran and Mahzan, S (2018) Classification of damage severity in natural fibre composites using principal component analysis. International Journal of Integrated Engineering, 10 (8). pp. 147-152. ISSN 2229-838X

Mohamed, Nor Shamsiah and Koh, Ching Theng (2018) Preparation of siam weed extracts. Journal of Mechanical Engineering, 5 (4). pp. 268-274. ISSN 2550-164X

Mohammed Usman, Abdullahi and Abdullah, Kamil and Batcha, Mohd Faizal Mohideen (2018) Comparative study on energy management and efficiency category in sustainable building rating schemes. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 49 (1). pp. 25-35. ISSN 2289-7879

Mohd Nor, M. K. and Ma’at, N. and Ho, C. S. (2018) Modeling dynamic anisotropic behaviour and spall failure in commercial aluminium alloys AA7010. Journal of Dynamic Behavior of Materials, 4. pp. 201-210. ISSN 2199-7446

Mohd Yunos, Muhammad Nur Annuar (2018) Development of distraction risk index (DRI) among the intrastate bus drivers in Kuala Lumpur Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Yusoff, Ainul Husna and Md Salleh, Salihatun and Abdullah, Mohd Ezree and Zaman, Izzuddin and Md Hani, Mohd Hatta and Siswanto, W.A. and Wan Mahmud, Wan Azlan (2018) Experimental evaluation of fish feeder machine controller system. International Journal of Integrated Engineering, 10 (8). pp. 218-222. ISSN 2229-838X

Mohid, Z. and Rahim, E.A. (2018) Chip pattern, burr and surface roughness in laser assisted micro milling of Ti6Al4V using micro ball end mill. Journal of Mechanical Engineering and Sciences, 12 (1). pp. 3410-3430. ISSN 2289-4659

Mohid, Zazuli (2018) Performance of laser assisted micro-milling (laμmill) of titanium alloy using micro ball end mill. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mohsin, Mohamad Lokman (2018) Finite element analysis of combined fracture and delamination on coated substrate under normal and tangential loading. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mustaffa, Nor Azimah (2018) Magnesium doped calcium phosphate/sodium alginate biocomposite for bone implant application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mustapa, Mohammad Sukri and Abdul Latif, Noradila and Mohd Joharudin, Nurul Farahin and Mahzan, Shahruddin and Masirin, Mohd Idrus and Abdul Hamid, Norashikin (2018) The effect of heat treatment on compression strength of recycled AA6061 aluminium chips. Materials Science Forum, 934. pp. 124-128. ISSN 1662-9752

Narong, O.L.C. and Chee, Kiong Sia and See, Khee Yee and Pauline, Ong and Zainudin, Azlan and Muhd Nor, Nik Hisyamudin and Hassan, Mohd Fahrul (2018) Optimisation of EMI shielding effectiveness: mechanical and physical performance of mortar containing POFA for plaster work using Taguchi Grey method. Construction and Building Materials, 176. pp. 509-518. ISSN 0950-0618

Nemah, Mohammed Najeh and Cheng, Yee Low and Ong, Pauline and Che Zakaria, Noor Ayuni (2018) Development and evaluation of a spot sensor glove for the tactile prosthetic hand. International Journal of Engineering & Technology, 7 (4.26). pp. 63-69. ISSN 2227-524X

Ng, Kei Hoa (2018) Investigations of Ni-SDC carbonate (Ni-SDCC) as composite anode for low temperature solid oxide fuel cells. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ngali, Zamani and Jemain, Noratika Budi and Chang, An Wee and Abdol Rahman, Mohd Nasrull and Kaharuddin, Muhammad Zulhilmi and Khairu Razak, Siti Badriah (2018) Analysis of musculoskeletal disorder due to working postures via dual camera motion capture system. International Journal of Integrated Engineering, 10 (5). pp. 164-169. ISSN 2229-838X

Ong, Pauline and Vui, Desmond Daniel Sheng Chin and Choon, Sin Ho and Chuan, Huat Ng (2018) Modeling and optimization of cold extrusion process by using response surface methodology and metaheuristic approaches. Neural Computing and Applications, 29. pp. 1077-1087. ISSN 0941-0643

Ong, Pauline and Zainuddin, Zarita and Kee, Huong Lai (2018) A novel selection of optimal statistical features in the DWPT domain for discrimination of ictal and seizure-free electroencephalography signals. Pattern Analysis and Applications, 21. pp. 515-527. ISSN 1433-7541

Othaman, Muhamad Fazli (2018) Combustion of pelletized empty fruit bunch and oil palm shell in a swirling fluidized bed combustor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Othman, Nurul Atiqah and Che Zakaria, Noor Ayuni and Mohd Ramli, Mohd Hanif and Hanapiah, Fazah Akhtar and Jingye, Yee and Cheng, Yee Low and Takashi, Komeda (2018) PLC system to optimize training device of upper limb spasticity. Journal of Mechanical Engineering, 15 (2). pp. 127-141. ISSN 1823- 5514

Paiman, Nuur Azreen and Hariri, Azian and Masood, Ibrahim and Noor, Arma and Yusof, Khairul Hazdi and Abdullah, Samsuri and Idris, Ahmad Fu’ad and Mohd Afandi, Mohd Azizi and Asmuin, Nor Zelawati and Leman, Abdul Mutalib (2018) Development of neurobehavioral deterioration risk prediction model for welder: a proposed study. International Journal of Integrated Engineering, 10 (5). pp. 122-129. ISSN 2229-838X

Paisal, Muhammad Sufyan Amir (2018) Computational analysis on stent geometries in carotid artery. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Prathabrao, M and Ibrahim, M H I and M Amin, Sri Yulis and Othman, M H (2018) Parameter optimization of metal injection moulding: a review. Journal of Mechanical Engineering, SI 5 (6). pp. 100-114. ISSN 1823- 5514

Ramli, Afifah and Razali, Mohd Azahari and Madon, Rais Hanizam and Khalid, Amir and Mohmad Ja’at, Md Norrizam and Manshoor, Bukhari (2018) Influence of material composition on flame spread behavior over combustible solid of paper/bagasse. International Journal of Integrated Engineering, 10 (8). pp. 142-146. ISSN 2229-838X

Sadikin, Azmahani and Mohd Yunus, Nurul Akma and Abd Hamid, Saiful Anuar and Ismail, Al Emran and Salleh, Salihatun and Ahmad, Sufizar and Abdol Rahman, Mohd Nasrull and Mahzan, Shahruddin and Ayop, Sallehuddin Shah (2018) A comparative study of turbulence models on aerodynamics characteristics of a NACA0012 airfoil. International Journal of Integrated Engineering, 10 (1). pp. 134-137. ISSN 2229-838X

Shahbudin, S.N.A. and M Amin, Sri Yulis and Othman, M.H. and Ibrahim, M.H.I. (2018) Critical powder loading and the rheology of nanosized cemented carbide with titanium carbide as grain growth inhibitor for injection molding. International Journal of Integrated Engineering, 10 (4). pp. 114-118. ISSN 2229-838X

Shibani, Wanis Mustafa Edukali (2018) Investigation study of various carrier type for air tunnel transportation. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Sies, Mohamad Farid (2018) Development of deflector flat spray nozzle with mixed of water and organic citric acid for emissions trap and cooling in the kitchen hood ventilation system. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Sies, Mohamad Farid (2018) Development of deflector flat spray nozzle with mixed of water and organic citric acid for emissions trap and cooling in the kitchen hood ventilation system. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Talib, N. and Rahim, E.A. (2018) Experimental evaluation of physicochemical properties and tapping torque of hexagonal boron nitride in modified jatropha oils-based as sustainable metalworking fluids. Journal of Cleaner Production, 171. pp. 743-755. ISSN 0959-6526

Talib, N. and Rahim, E.A. (2018) Performance of modified jatropha oil in combination with hexagonal boron nitride particles as a bio-based lubricant for green machining. Tribology International, 118. pp. 89-104. ISSN 0301-679X

Tan, Kwok Joon (2018) Preparation of bioactive surface via gel oxidation on titanium for biomedical application (hip joint replacement). Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Taweekun, Juntakan and Saba, arif and Mas, Fawzi and Asmuin, Nor Zelawati and Batcha, Mohd Faizal Mohideen and Noranai, Zamri (2018) Design, fabrication and experimentation of swing electricity power generation system. International Journal of Engineering and Technology, 7 (3.29). pp. 568-570. ISSN 2227-524X

Vui, Desmond Daniel Sheng Chin, and Yahya, Musli Nizam and Che Din, Nazli and Ong, Pauline (2018) Acoustic properties of biodegradable composite micro-perforated panel (BC-MPP) made from kenaf fibre and polylactic acid (PLA). Applied Acoustics, 138. pp. 179-187. ISSN 0003-682X

Yamamoto, T. and Ishimaru, K. and Osman, K. and Kori, M. I. and Khudzari, A. Z. M. and Taib, I. and Yamamoto, T. (2018) Numerical simulation of concentration over-voltage in a polymer electrolyte fuel cell under low-hydrogen conditions. International Journal of Integrated Engineering, 10 (4). pp. 88-94. ISSN 2229-838X

Yusof, M.M.M and Salleh, S.M. and Ainul, H.M.Y and Siswanto, W.A. and Mahmud, W.M.A.W (2018) Analysis of Golfer‘s brainwave signal during par tee Ireland and driving range game. International Journal of Engineering & Technology, 7 (4.3). pp. 469-472. ISSN 2227-524X

Yusup, E. and Roslan, A. R. and Siswanto, W.A. and Ngali, Zamani and Salleh, S. and Mohamad, Z. and Wan Daud, W. R. and Roslan, R. (2018) Mechanical properties of caco3 extracted from cockle shell with high density polyethylene (HDPE) for biomaterials in bone substitute application. SCIENCE INTERNATIONAL, 30 (1). pp. 91-95. ISSN 1013-5316

Zainal, Nur Saadah and Mohamad, Zaleha and Mustapa, Mohammad Sukri and Badarulzaman, Nur Azam and Abdul Salim, Zainathul Akhmar Salim and Masirin, Mohd Idrus (2018) Study of characteristics of rice husk and silica obtained from rice husk. International Journal of Chemical Engineering and Applications, 9 (5). pp. 158-162. ISSN 2010-0221

Zainudin, Azlan (2018) Performance properties optimization of triaxial ceramic-palm oil fuel ash by employing Taguchi design and flower pollination algorithm. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Zaliran, Muhammad Taufiq (2018) The effect of Meranti Merah wood fiber loading and sizes to the absorption property of polymer foam composites. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zulkiflee, Nur Syahraain (2018) Effect of calcination temperature on bilayer TiO2/ZnO and ZnO/TiO2 thin films. Masters thesis, Universiti Tun Hussein Onn Malaysia.