Items where Division is "Faculty of Engineering Technology > Department of Mechnical Engineering Technology" and Year is 2023

Group by: Creators | Item Type | No Grouping

Number of items: 36.

Article

Ab Aziz, Nur Adila and Ruslan, Fatin Najihah and Al Madhoun, Wesam (2023) A Sustainable Approach for Removing Organic Pollutants from Food Processing Effluents Using Unmodified Cocopeat as an Adsorbent. INTERNATIONAL JOURNAL OF SUSTAINABLE CONSTRUCTION ENGINEERING AND TECHNOLOGY, 14 (2). pp. 176-183. ISSN 2600-7959

Abdussalam Al-hakimi Mohd Tahir, Abdussalam Al-hakimi Mohd Tahir and Abdul Rashid, Azrin Hani and Nasir, Siti Hana and Ahmad, Mazatusziha and Nor Anuwar, Anis Amirah (2023) Thermal resistance and bursting strength analysis of multilayer needle-punched bamboo/polyester nonwoven batt. The Journal of The Textile Institute. pp. 1-13.

Alwan, Waseem and Ngadiman, Nor Hasrul Akhmal and Hassan, Adnan and Ramadhan Saufi, Syahril and Mahmood, Salwa (2023) Ensemble Classifier for Recognition of Small Variation in X-Bar Control Chart Patterns. Machines, 11 (115). pp. 1-33.

Alwan, Waseem and Ngadiman, Nor Hasrul Akhmal and Hassan, Adnan and Saufi, Syahril Ramadhan and Mahmood, Salwa (2023) Ensemble Classifier for Recognition of Small Variation in X-Bar Control Chart Patterns. Machines. pp. 1-33.

Atil, Aida Atiqah and Mat Hassan, Nik Normunira and Roseli, Adyla Illyana and Mohamed Yusop, Fatimah and Mohd Rus, Anika Zafiah and Mars, Noraini and Tuan Ismail, Tuan Noor Hasanah and Yahya, Nur Faezah (2023) PHYSICAL CHARACTERIZATION OF POLYURETHANECLAY COMPOSITE DOPED WITH TREATED AND UNTREATED PU WASTE AS FILLER FOR SUBGRADE LAYER APPLICATIONS. Malaysian Construction Research Journal, 39 (1). pp. 29-40.

Atil, Aida Atiqah and Mat Hassan, Nik Normunira and Roseli, Adyla Illyana and Mohamed Yusop, Fatimah and Mohd Rus, Anika Zafiah and Marsi, Noraini and Tuan Ismail, Tuan Noor Hasanah and Yahya, Nur Faezah (2023) PHYSICAL CHARACTERIZATION OF POLYURETHANECLAY COMPOSITE DOPED WITH TREATED AND UNTREATED PU WASTE AS FILLER FOR SUBGRADE LAYER APPLICATIONS. Malaysian Construction Research Journa, 39 (1). pp. 29-40.

Atil, Aida Atiqah and Mat Hassan, Nik Normunira and Roseli, Adyla Illyana and Mohamed Yusop, Fatimah and Mohd Rus, Anika Zafiah and Marsi, Noraini and Tuan Ismail, Tuan Noor Hasanah and Yahya, Nur Faezah and Leman, Abdul Mutalib (2023) Effect of Buoyancy, Compressive Strength, and Shear Strength of Polyurethane-Clay Composite (PU-CC) Doped with Polyurethane Filler Waste in Soft Clay Application. Journal of Advanced Research in Applied Sciences and Engineering Technology, 31 (3). pp. 106-114. ISSN 2462-1943

Atil, Aida Atiqah and NMat Hassan, Nik Normunira and Roseli, Adyla Illyana and Mohamed Yusop, Fatimah and Mohd Rus, Anika Zafiah and Marsi, Noraini and Tuan Ismail, Tuan Noor Hasanah and Yahya, Nur Faezah (2023) PHYSICAL CHARACTERIZATION OF POLYURETHANECLAY COMPOSITE DOPED WITH TREATED AND UNTREATED PU WASTE AS FILLER FOR SUBGRADE LAYER APPLICATIONS. Malaysian Construction Research Journal, 39 (1). pp. 29-40.

Azahar, Mohamad Amirur Rahman and Darlis, Nofrizalidris and Hassan, Norhafizzah and Mohd Salleh, Zuliazura and Saiful Azam, Syafiqah Ruqaiyah and Taib, Ishkrizat and Ngali, Mohd Zamani and Mustaffa, Khairul Nizam and Hashim, Muhamad Mohshein (2023) CFD Analysis on Different Filling Volume Capacity and Fluid Density for Flexitank Application. CFD Letters, 15 (1). pp. 115-126. ISSN 2180-1363

Azahar, Mohamad Amirur Rahman and Darlis, Nofrizalidris and Hassan, Norhafizzah and Mohd Salleh, Zuliazura and Taib, Ishkrizat and Ngali, Mohd Zamani and Mustaffa, Khairul Nizam and Hashim, Muhamad Mohshein (2023) CFD Analysis on Different Filling Volume Capacity and Fluid Density for Flexitank Application. CFD Letters, 15 (1). pp. 115-126. ISSN 2180-1363

Chong Zi Yao, Chong Zi Yao and Nor Azli, Mohamad Nor Azhari and Hariri, Azian and Muhamad Damanhuri, Amir Abdullah and Mustafa, Mohd Syafiq Syazwan (2023) Preliminary Study on Student’s Performance and Thermal Comfort in Classroom. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 101 (1). pp. 59-73. ISSN 2289-7879

Huzaisham, Nur Athirah and Nasir, Siti Hana and Mohd Idris, Muhammad Khalis and Carolina Quintero Rodriguez, Carolina Quintero Rodriguez (2023) Heat-setting parameters optimisation of cotton/elastane fabric using response surface methodology. Indian Journal of Fibre & Textile Research, 48. pp. 27-34.

Huzaisham, Nur Athirah and Nasir, Siti Hana and Mohd Idris, Muhammad Khalis and Rodriguez, Carolina Quintero (2023) Heat-setting parameters optimisation of cotton/elastane fabric using response surface methodology. Indian Journal of Fibre & Textile Research, 48. pp. 27-34.

Ismail, Syahriza and Abu Bakar, Noor Farah Iddayu and Mustafa, Zaleha and Omar, Noor Irinah and Ibrahim, Siti Aida (2023) SYNTHESIS AND CHARACTERIZATION OF IRON OXIDE NANOLEAF BY THERMAL OXIDATION. Malaysian Journal of Microscopy, 19 (1). pp. 90-99. ISSN 1823-7010

Ismail, Syahriza and Abu Bakar, Noor Farah Iddayu and Mustafa, Zaleha and Omar, Noor Irinah and Ibrahim, Siti Aida (2023) SYNTHESIS AND CHARACTERIZATION OF IRON OXIDE NANOLEAF BY THERMAL OXIDATION. Syahriza Ismail et al. Malaysian Journal of Microscopy, 19 (1). pp. 90-99. ISSN 1823-7010

Mohamad Arifin, Nurliyana and Mohamad, Fariza and Hussin, Rosniza and Mohd Ismail, Anis Zafirah and Ahmad Ramli, Shazleen and Ahmad, Norazlina and Muhd Nor, Nik Hisyamudin and Sahdan, Mohd Zainizan and Mohammad Zain, Mohd Zamzuri and Izaki, Masanobu (2023) Annealing Treatment on Homogenous n-TiO2/ZnO Bilayer Thin Film Deposition as Window Layer for p-Cu2O-Based Heterostructure Thin Film. Coatings, 13 (206). pp. 1-13.

Mohamad Arifin, Nurliyana and Mohamad, Fariza and Hussin, Rosniza and Mohd Ismail, Anis Zafirah and Ahmad Ramli, Shazleen and Ahmad, Norazlina and Muhd Nor, Nik Hisyamudin and Sahdan, Mohd Zainizan and Mohammad Zain, Mohd Zamzuri and Masanobu Izaki, Masanobu Izaki (2023) Annealing Treatment on Homogenous n-TiO2/ZnO Bilayer Thin Film Deposition as Window Layer for p-Cu2O-Based Heterostructure Thin Film. Coatings, 13 (206). pp. 1-13.

Mohamad Arifin, Nurliyana and Mohamad, Fariza and Hussin, Rosniza and Mohd Ismail, Anis Zafirah and Ramli, Shazleen Ahmad and Ahmad, Norazlina and Muhd Nor, Nik Hisyamudin and Sahdan, Mohd Zainizan and Mohammad Zain, Mohd Zamzuri and Izaki, Masanobu (2023) Annealing Treatment on Homogenous n-TiO2/ZnO Bilayer Thin Film Deposition as Window Layer for p-Cu2O-Based Heterostructure Thin Film. Coatings, 13 (206). pp. 1-13.

Mohamad Zin, Muhamad Asrulhazwan and Samiran, Nor Afzanizam and Meng-Choung Chiong, Meng-Choung Chiong and Ishak, Mohammad Zulfikar and Hamid, Muhammad Suhail Sahul (2023) Effect of Equivalence Ratio on EFB Pellet Gasification Characteristic using Thermal Arc Plasma Suction Downdraft Gasifier. Journal of Advanced Research in Applied Sciences and Engineering Technology, 30 (2). pp. 92-102. ISSN 2462-1943

Mohamad Zin, Muhamad Asrulhazwan and Samiran, Nor Afzanizam and Meng-Choung Chiong, Meng-Choung Chiong and Ishak, Mohammad Zulfikar and Sahul Hamid, Muhammad Suhail (2023) Effect of Equivalence Ratio on EFB Pellet Gasification Characteristic using Thermal Arc Plasma Suction Downdraft Gasifier. Journal of Advanced Research in Applied Sciences and Engineering Technology, 30 (2). pp. 92-102. ISSN 2462-1943

Mohammad Arafat, Mohammad Arafat and Ishak, Izuan Amin and Mohammad, Ahmad Faiz and Khalid, Amir and Mohmad Jaát, Md. Norrizam and Yasak, Mohd Fuad (2023) Effect of Reynolds number on the wake of a Next-Generation High-Speed Train using CFD analysis. CFD Letters, 15 (1). pp. 76-87. ISSN 2180-1363

Muhammad Nasir, Mohd Nizar and Mohd Nordin, Ili Najaa Aimi and Mohd Faudzi, Ahmad Athif and Muftah, Mohamed Naji and Mhd Yusoff, Mohd Akmal and Mohamaddan, Shahrol (2023) Modeling and Position Control of Fiber Braided Bending Actuator Using Embedded System. Applied Sciences, 13 (3170). pp. 1-16.

Nor Afzanizam Samiran, Nor Afzanizam Samiran and Khalil Firdaus Abu Mansor, Khalil Firdaus Abu Mansor and Razlin Abd Rashid, Razlin Abd Rashid and Muhammad Suhail Sahul Hamid, Muhammad Suhail Sahul Hamid (2023) CFD Simulation Analysis of Non-Premixed Combustion using a Novel AxialRadial Combined Swirler for Emission Reduction Enhancement. CFD Letters, 12 (6). pp. 1-11. ISSN 2180-1363

Nur Athirah Huzaisham, Nur Athirah Huzaisham and Siti Hana Nasir, Siti Hana Nasir and Muhammad Khalis Mohd Idris, Muhammad Khalis Mohd Idris and Carolina Quintero Rodriguez, Carolina Quintero Rodriguez (2023) Heat-setting parameters optimisation of cotton/elastane fabric using response surface methodology. Indian Journal of Fibre & Textile Research, 48. pp. 27-34.

Nurshafnaz Mohd Maruai, Nurshafnaz Mohd Maruai and Mohamed Sukri MatAli, Mohamed Sukri MatAli and SheikhAhmad Zaki, SheikhAhmad Zaki and JorgeAlfredoArdila‑Rey, JorgeAlfredoArdila‑Rey and IzuanAmin Ishak, IzuanAmin Ishak (2023) The infuence of diferent downstream plate length towards the fow‑induced vibration on a square cylinder. Scientifc Reports. pp. 1-35.

Rahman Azahar, Mohamad Amirur and Darlis, Nofrizalidris and Hassan, Norhafizzah and Mohd Salleh, Zuliazura and Saiful Azam, Syafiqah Ruqaiyah and Taib, Ishkrizat and Ngali, Mohd Zamani and Mustaffa, Khairul Nizam and Hashim, Muhamad Mohshein (2023) CFD Analysis on Different Filling Volume Capacity and Fluid Density for Flexitank Application. CFD Letters, 15 (1). pp. 115-126.

Roseli, Adyla Illyana and Mat Hassan, Nik Normunira and Abdul Mutalib Leman, Abdul Mutalib Leman and Abdul Latif, Najibah and Yulfian Aminanda, Yulfian Aminanda and Djoko Setyanto, Djoko Setyanto and Yuyun Tajunnusa, Yuyun Tajunnusa and Yonrapach Areerob, Yonrapach Areerob and Methawee Nukunudompanich, Methawee Nukunudompanich (2023) The Physical and Sound Absorption Property of Lightweight Rigid Polyurethane Composite Reinforced Bamboo Fiber for Roof Applications. Journal of Advanced Research in Applied Sciences and Engineering Technology, 31 (2). pp. 268-280. ISSN 2462-1943

Saiful Azam, Syafiqah Ruqaiyah and Darlis, Nofrizalidris and Mustaffa, Norrizal and Azahar, Mohamad Amirur Rahman and Sadun, Amirul Syafiq and Abu Hassan, Omar and Taib, Ishkrizat and Mustaffa, Khairul Nizam and Hashim, Muhamad Mohshein (2023) CFD Analysis of the Effect of Heat Distribution on Different Heating Pad Piping Arrangements for Flexitank Application. CFD Letters, 15 (3). pp. 1-15. ISSN 2180-1363

Saiful Azam, Syafiqah Ruqaiyah and Darlis, Nofrizalidris and Mustaffa, Norrizal and Rahman Azahar, Mohamad Amirur and Sadun, Amirul Syafiq and Abu Hassan, Omar and Taib, Ishkrizat and Mustaffa, Khairul Nizam and Hashim, Muhamad Mohshein (2023) CFD Analysis of the Effect of Heat Distribution on Different Heating Pad Piping Arrangements for Flexitank Application. CFD Letters, 15 (2). pp. 1-15. ISSN 2180-1363

Waseem Alwan, Waseem Alwan and Ngadiman, Nor Hasrul Akhmal and Adnan Hassan, Adnan Hassan and Syahril Ramadhan Saufi, Syahril Ramadhan Saufi and Mahmood, Salwa (2023) Ensemble Classifier for Recognition of Small Variation in X-Bar Control Chart Patterns. Machines, 11 (1). pp. 1-33.

Waseem Alwan, Waseem Alwan and Nor Hasrul Akhmal Ngadiman, Nor Hasrul Akhmal Ngadiman and Adnan Hassan, Adnan Hassan and Syahril Ramadhan Saufi, Syahril Ramadhan Saufi and Salwa Mahmood, Salwa Mahmood (2023) Ensemble Classifier for Recognition of Small Variation in X-Bar Control Chart Patterns. Machines, 11 (115). pp. 1-33.

This list was generated on Fri Nov 22 03:02:14 2024 +08.

Export as	Atom RSS 1.0 RSS 2.0