Items where Division is "Faculty of Mechanical and Manufacturing Engineering > Department of Mechanical Engineering" and Year is 2017

A

A. Rahman, Khairunnisa (2017) The development of energy efficiency estimation system for domestic housing by using quality function deployment approach. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Abas, M.A. and Wan Salim, W.S. and Ismail, M.I. and Rajoo, S. and Martinez-Botas, R. (2017) Fuel consumption evaluation of SI engine using start-stop technology. Journal of Mechanical Engineering and Sciences, 11 (4). pp. 2967-2978. ISSN 2289-4659

Abd Rahman, Muhammad Faqhrurrazi (2017) Effect of liquid properties (water and lime juice) on spray characteristics of deflected flat spray nozzle (AL-75). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abd. Rahman, Ramhuzaini and Sepehri, Nariman (2017) Experimental comparison between proportional and PWM-solenoid valves controlled servopneumatic positioning systems. Transactions of the Canadian Society for Mechanical Engineering, 41 (1). pp. 65-83. ISSN 0315-8977 (Submitted)

Abdelrahman Kabrein, Hashim Ahmed (2017) Improving the indoor air quality (IAQ) through application of the air cleaning technologies for offices building simulated in environmental chamber. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Latif, Abdul Afiff Fiqhry (2017) Experimental study of biomedical stainless steel 316l vibration assisted milling using retrofittable 1D UVAM worktable. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Abdullah, Noor Hazwani (2017) The effect of waste cooking oil methanol molar ratio on yield and properties of biodiesel produced in a mini plant. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abu Bakar, Nor Hidayah and Mohd Zaini, Mohd Zairin Aiza and Mohd Fuzi, Muhamad Firdaus and Hassan, Mohd Fahrul and Radzuan, Muhammad Dinie Al-Syafiq and Hussein, Muhammad Hafeez (2017) Hydraulic bearing puller. In: Engineering Design Project. Series 1. Penerbit UTHM, Batu Pahat, Johor, pp. 102-112. ISBN 9789670764986

Ahmad, M.A. Haikal and Rahim, M. Zulafif and Mohd Fauzi, M. F. and Azis, N. Hafizah and Ismail, A.E. and Hassan, Mohd Fahrul and Arifin, A.M.T. and Yusof, M.S. and Ibrahim, M. Rasidi (2017) Electrical discharge machining of polycrystalline diamond using copper electrode – finishing condition. IOP Conference Series: Materials Science and Engineering (MSE), 203 (012019). ISSN 1757-899X

Ahmad, Noor Aqilah (2017) A comparative study on wear and corrosion behaviour of tungsten carbide-nickel (Wc-Ni) and tungsten carbide-cobalt (Wc-Co) high velocity oxy-fuel (HVOF) for carbon steel blade. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmed Bala, Abduladim Salem (2017) Characterization and processing of composite PP/UHMWPE filament for fused deposition modelling application. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ajala, , Amkpa Job (2017) A study on thermal conductivity of six unexplored Nigerian clays for possible refractory and insulating materials. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Aminnuddin, Hazim Fadli and Abdullah, Mohammad Kamil (2017) Numerical investigation on pitch distance, compound angle and turbulence intensity of double cylindrical film cooling hole geometry. ARPN Journal of Engineering and Applied Sciences, 12 (8). pp. 2503-2508. ISSN 1819-6608

Aminnuddin, Mohd Hazim Fadli (2017) Simulation and experimental study of double holes film cooling. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Amirnordin, Shahrin Hisham and Khalid, Amir and Suardi, Mirnah and Manshoor, Bukhari and Hushim, M F (2017) Effects of fractal grid on spray characteristics and flame development in burner combustion. Journal of Physics: Conference Series, 822 (1). pp. 1-5. ISSN 1742-6588

Anak Emley, Eryka Respolyn and Abdul Majid, Nor Shamila and Anak Gay, Sharria Sendai and Ya Shak, Aida Syazwani and Hassan, Mohd Fahrul (2017) Fish scale remover machine. In: Engineering Design Project. Series 2. Penerbit UTHM, Batu Pahat, Johor, pp. 29-40. ISBN 9789672110163

Azis, N. Hafizah and Rahim, M. Zulafif and Sa’ude, Nasuha and Rafai, N. and Yusof, M.S. and Tobi, A.L.M. and Sharif, Z.M. and Ibrahim, M. Rasidi and Ismail, A.E. (2017) The influence of injection molding parameter on properties of thermally conductive plastic. IOP Conference Series: Materials Science and Engineering (MSE), 203 (012018). pp. 1-9. ISSN 1757-899X

Azizan, Mohd Fikri (2017) A comprehensive fractal approach in determination of the effective thermal conductivity of gas diffusion layers in polymer electrolyte membrane fuel cells. Masters thesis, Universiti Tun Hussein Onn Malaysia.

B

Baharom, Syazwani (2017) Effect of composition and sintering temperature on silica-nickel oxide foams by slurry method. Masters thesis, Universiti Tun Hussein Onn Malaysia.

C

Chen, Wong Keong (2017) Machining feature-based system for supporting step-compliant milling process. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

D

Didane, Djamal Hissein (2017) Experimental and simulation study on the aerodynamic performance of a counter rotating vertical axis wind turbine. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Didane, Djamal Hissein and Ab Wahab, Abas and Shamsudin, Syariful Syafiq and Rosly, Nurhayati and Zulkafli, Mohd Fadhli and Sofian, Mohd (2017) Assessment of wind energy potential in the capital city of Chad, N’djamena. AIP Conference Proceedings, 1831 (NIL). pp. 1-12. ISSN 0094-243X

Dol Baharin, Muhammad Zulhusmi and Abd. Manan, Abdul Shukur and Baharom, Muhamad Hafizuddin and Hassan, Mohd Fahrul and Che Mat, Nor Ain and Ahmad, Muhamad Nurhisham (2017) Extruder for food product (otak–otak) with heater and roll cutter. In: Engineering Design Project. Series 1. Penerbit UTHM, Batu Pahat, Johor, pp. 76-88. ISBN 9789670764986

E

Elewe, Adel Muhsin and Hasnan, Khalid and Nawawi, Azli (2017) Hybridized firefly algorithm for multi-objective radio frequency identification (RFID) network planning. ARPN Journal of Engineering and Applied Sciences, 12 (3). pp. 834-840. ISSN 1819-6608

Elewe, Adel Muhsin and Hasnan, Khalid and Nawawi, Azli (2017) Optimization of RFID network planning using MDB-FA method. Journal of Telecommunication, Electronic and Computer Engineering (JTEC), 9 (2-12). pp. 7-12. ISSN 2180-1843

H

Halib, Nadia and Nuairy, Nabilah and Ramli, Haslinda and Ahmad, Ishak and Othman, Norinsan Kamil and Md Salleh, Salihatun and Bakarudin, Saiful Bahari (2017) Preliminary assessment of salvadora persica whitening effects on extracted stained teeth. Journal of Applied Pharmaceutical Science, 7 (12). pp. 121-125. ISSN 2231-3354

Hanapi, Muhammad Ikhmal (2017) Influence of alkali resistant (AR) glass in porcelain clay for vitrified clay pipes. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hariri, Azian and Mohamad Noor, Noraishah and Paimana, Nuur Azreen and Ahmad Zaidi, Ahmad Mujahid and Zainal Bakri, Siti Farhana (2017) Heavy metals found in the breathing zone,toenails and lung function of welders working in an air-conditioned welding workplace. International Journal of Occupational Safety and Ergonomics, 24 (4). pp. 646-651. ISSN 1080-3548

Hassan, Haswira and Abdullah, Mohammad Kamil (2017) Effects of LoD and PoD in combined-hole film cooling. ARPN Journal of Engineering and Applied Sciences, 12 (8). pp. 2509-2514. ISSN 1819-6609

Hassan, Ibnu Anas (2017) The experimental study and numerical simulation of falling liquid film flow on horizontal tubes. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hayder, Ali Mohammed and Sapit, Azwan and Abed, Qahtan Adnan (2017) Review of solar thermal storage techniques. ARPN Journal of Engineering and Applied Sciences, 12 (21). pp. 6103-6119. ISSN 1819-6608

Husin, Mohd Asri and Shahrudin, Muhammad Shahrunizam and Sapiange, Muhamad Hanif and Abdul Razak, Siti Zarina and Hassan, Mohd Fahrul (2017) Dried chili seeds separator machine. In: Engineering Design Project. Series 1. Penerbit UTHM, Batu Pahat, Johor, pp. 1-14. ISBN 9789670764986

I

Isa, Noor Amira (2017) Bottleneck-based heuristic for permutation flowshop scheduling. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ismail, Al Emran and Awang, M.K. and Mohd Tobi, A. and Ahmad, M.H. (2017) Mode i stress intensity factors of slanted cracks. ARPN Journal of Engineering and Applied Sciences, 12 (10). pp. 3189-3194. ISSN 1819-6608

Ismail, Al Emran and Mat Noor, Fazimah and Mohamad, Zaleha and Madlan, Mohd Amran and Rahim, Mohammad Zulafif and Ibrahim, Mohd Rasidi and Ahmad, Sufizar and Abdol Rahman, Mohd Nasrull and Md Salleh, Salihatun and Sadikin, Azmahani and Mahzan, Shahruddin and Muhd Nor, Nik Hisyamudin (2017) Effect of triggering angles on the crushing mechanisms of hybrid woven kenaf/aluminum hollow cylinders. Journal of Physics: Conference Series, 914 (NIL). pp. 1-8. ISSN 1742-6588

Ismail, Al Emran and Nezere, N. (2017) Numerical simulation of hybrid composite tubes under oblique compression. World Journal of Engineering, 14 (2). pp. 173-177. ISSN 1708-5284

J

Johar, Ahmad Sufiyan and A. Karim, Mohamad Nur and Mohidin, Mohamad Nasiruddin and Mohd Yazid, Muhamad Afiq Najmi and Hassan, Mohd Fahrul and Nardir, Nur Atikah and Wan Ali, Wan Norsyukriah (2017) Pressure fryer. In: Engineering Design Project. Series 1. Penerbit UTHM, Batu Pahat, Johor, pp. 50-62. ISBN 9789670764986

K

Kadir, Mohd Faiz and Harun, Mohd Zaim and Hassan, Mohd Fahrul and Hamdan, Nur Izzah and Paimin, Noor Farzee and Abdullah, Nor Sharifhatul Adila (2017) Portable mud remover. In: Engineering Design Project. Series 2. Penerbit UTHM, Batu Pahat, Johor, pp. 115-130. ISBN 9789672110163

Kamaruddin, Muhammad Hazeem and Yac’cob, Muhammad Afiq Adham and Mohd Haizan, Mohamad Azrul Azhad and Amiruddin, Fatin Nur Ainina and Hassan, Mohd Fahrul and Muhmad Afandi, Farah Danieza (2017) Shallots skin peeler machine. In: Engineering Design Project. Series 1. Penerbit UTHM, Batu Pahat, Johor, pp. 63-75. ISBN 9789670764986

Khamis, Siti Zubaidah (2017) The effect of injection molding processing conditions and fiber content towards the properties of polypropylene-nanoclay nanocomposites blend with gigantochloa scortechinii fibers. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Khoo, Weily and Koh, Ching Theng and Lim, Shing Chee (2017) Synthetic and Natural Fibrous Scaffolds for Soft Tissue Engineering Applications. Journal of Mechanical Engineering, 4 (3). pp. 223-233. ISSN 1823- 5514

L

Lim, Shing Chee and Khoo, Weily and Koh, Ching Theng (2017) Electrospinning of Polycaprolactone (PCL) and Gelatin Polymeric Fibers. Journal of Mechanical Engineering, 4 (3). pp. 246-254. ISSN 1823- 5514

M

M. Elkamel, Hasan Taher (2017) The development of reynolds averaged navier stokes solver for a two dimensional compressible flow problem. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

M. Saad, Magedi Moh (2017) Ram air turbine enhancement for auxiliary power unit replacement. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Madlan, Mohd Amran and Ghazali, M. I. and Zaman, Izzuddin and Kasron, Md Zainorin and Ying, T. C. (2017) The application of coconut fiber as dissipative silencer. IOP Conference Series: Materials Science and Engineering, 165 (1). pp. 1-6. ISSN 1757-899X

Mahdi, Ahmed Sahib (2017) Effects of reinforcement materials and matrix particle sizes on mechanical properties and wear of recycled aluminum chips. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mamat, K. A. and Yusof, M.S. and Wan Yusoff, Wan Fauziah and Rahim, M. Zulafif and Hassan, S. and A. Rahman, M. Qusyairi and Abd Karim, M. A. (2017) Dehydration of traditional dried instant noodle (mee siput) using controlled temperature & humidity dryer. IOP Conference Series: Materials Science and Engineering (MSE), 203 (012009). pp. 1-7. ISSN 1757-899X

Manshoor, Bukhari and Mohamed Ster, Laily Azwati and Khalid, Amir and Zaman, Izzuddin (2017) An effect of straight and serpentine flow fielddesign on proton exchange membrane fuel cell. ARPN Journal of Engineering and Applied Sciences, 12 (10). pp. 3076-3079. ISSN 1819-6608

Masrol, Shaiful Rizal and Irwan Ibrahim, Mohd Halim and Adnan, Sharmiza and Ahmad Tajudin, Muhammad Syauqi Asyraf and Raub, Radhi Abdul and Abdul Razak, Siti Nurul Aqma and Md Zain, Siti Nur Faeza (2017) Effects of beating on the characteristics of Malaysian durian (Durio Zibethinus Murr.) rind chemi-mechanical (CMP) pulp and paper. Jurnal Teknologi, 80 (2). pp. 9-17. ISSN 2180–3722

Mat Husin, Muhammad Muslimin (2017) The characterization of mechanical behaviour on kenaf fibre / polypropylene composites. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mat Sharif, Zainon and Mohd Taib, Norhasnina and Yusof, Mohd Sallehuddin and Rahim, Mohammad Zulafif and Mohd Tobi, Abdul Latif and Othman, Mohd Syafiq (2017) Designation of soap molder machine and procedure for transparent soap. "IOP Conference Series: Materials Science and Engineering Journal ", 203 (012001). pp. 1-7. ISSN 1757-899X

Mohamad Jamil, Ahmad Syakir (2017) Study of kitchen hood water mist system for cooking emission (UL1046) filtration with low pressure delected nozzle. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamad Sa’ad, Mohamad Syahid and Hassan, Mohd Fahrul and Junairi, Mohamad Hasrul and Kamaruzaman, Mohamad Ridzuan and Ismail, Mohamad Rizal (2017) Portable marketing set. In: Engineering Design Project. Series 2. Penerbit UTHM, Batu Pahat, Johor, pp. 93-102. ISBN 9789672110163

Mohamed Anuar, Rabiatul Adawiyah (2017) Interfacial reaction between SAC305 and SAC405 lead-free solders and electroless nickel/immersion silver (ENImAg) surface finish. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohammed, Akmal Nizam and Razali, Mohd Azahari and Sapit, Azwan and Hushim, Mohd Faisal and Osman, Shahrul Azmir and A. Rahman, Mohamad Farid (2017) Numerical study of variable length exhaust pipe in small engine. ARPN Journal of Engineering and Applied Sciences, 12 (7). pp. 2374-2379. ISSN 1819-6608

Mohd @ Mohd Nor, Syarul Hakimi (2017) Optimizations and recycling industrial waste (palm oil fly ash) as a pigment in coating technology. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Amin, Azriszul (2017) Application of restaurant waste lipids (RWL) as a binder component in metal injection moulding. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Apandi, Muhammad Noorakmal and Azali, Muhammad Syafiq and Hassan, Mohd Fahrul and Omar, Nur Izzati and Ramli, Muhammad Shahrizzat and Emran, Muhammad Syahir (2017) Cakar ayam shaping machine. In: Engineering Design Project. Series 2. Penerbit UTHM, Batu Pahat, Johor, pp. 81-91. ISBN 9789672110163

Mohd Azmi, Mohd Ayub and Abdul Ghani, Luqman Ul-Hakimi and Zakaria, Nur Aqilah and Ahmad Nayan, Nurul Syadatul Athira and Hassan, Mohd Fahrul (2017) Cheese tart press machine. In: Engineering Design Project. Series 2. Penerbit UTHM, Batu Pahat, Johor, pp. 103-114. ISBN 9789672110163

Mohd Khalid, Muhamad Azrin and Ismail, Azzura (2017) Mitigation of corrosion attack on carbon steel coated cermet alloy in different anion contents. AIP Conference Proceedings, 1901. pp. 120003-1. ISSN 978-0-7354-1589-8

Mohd Rani, Mohd Hafis and Ismon, Mohd Nur Hakim and Hassan, Mohd Fahrul and Mohd Yusri, Nurul Hamira Yusma and Kassim, Shazreen and Ibrahim, Nur Afizah (2017) Motorized cart. In: Engineering Design Project. Series 1. Penerbit UTHM, Batu Pahat, Johor, pp. 113-124. ISBN 9789670764986

Mohd Salim, Nurul Syamimi (2017) Characterization of thermoset biopolymer in thermoplastic of low and high density polyethylene upon uv irradiation. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Sidi, Siti Nor Faezah and Che Mat, Faez and Umor, Muhamad Asyraf and Saadon, Mohd Shazlan and Hassan, Mohd Fahrul and Muhammad, Amirul Taufiq (2017) Coconut dehusker machine. In: Engineering Design Project. Series 2. Penerbit UTHM, Batu Pahat, Johor, pp. 1-13. ISBN 9789672110163

Mohd Tobi, A. L. and Kamdi, Z. and Ismail, M. I. and Nagentrau, M. and Roslan, L. N. H. and Mohamad, Z. and Omar, A. S. and Abdul Latif, N. (2017) Abrasive wear failure analysis of tungsten carbide hard facing on carbon steel blade. IOP Conf. Series : Materials Science and Engineering, 165 (012020). pp. 1-9. ISSN 1757-899X

Mohd Tobi, A.L. and Sun, W. and Shipway, P.H. (2017) Evolution of plasticity-based wear damage in gross sliding fretting of a Ti-6Al-4V non-conforming contact. Tribology International, 113. pp. 474-486. ISSN 0301-679X

Mohd Tobi, A.L. and Sun, W. and Shipway, P.H. (2017) Investigation on the plasticity accumulation of Ti-6Al-4V fretting wear by decoupling the effects of wear and surface profile in finite element modelling. Tribology International, 113. pp. 448-459. ISSN 0301-679X

Mohd Yusoff, Nurrul Rahmah (2017) Continuous biodiesel process using ultrasonic in-line reactor for Jatropha Curcas Oil (JCO). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mok, Khiaw Keat and Hassan, Mohd Fahrul and Ng, Chee Seng and Amir, Nurul Natasya and Ibrahim, Nor Syahira Syeri and Ahmad Maulana, Nur Shafikah (2017) Portable panel air conditioner. In: Engineering Design Project. Series 2. Penerbit UTHM, Batu Pahat, Johor, pp. 53-68. ISBN 9789672110163

Mustafa, Mohd Syafiq Syazwan (2017) Humidity control in different building applications; restaurant and operation theatre. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mustafa, Muhammad Syahmi Anat and Hassan, Mohd Fahrul and Yusup, Muhaimin and Mohamed, Mohd Azren and Abdul Halim, Siti Nur Hasrat and Zakaria, Nur Syuhada (2017) Kerepek pisang machine. In: Engineering Design Project. Series 2. Penerbit UTHM, Batu Pahat, Johor, pp. 41-51. ISBN 9789672110163

Mustapa, Muhammad Wazir (2017) Fabrication of built-in retractable hose mechanism for domestic usage. Masters thesis, Universiti Tun Hussein Onn Malaysia.

N

Nagentrau, M. and Mohd Tobi, A.L. and Kamdi, Z. and Ismail, M. I. and Sambu, M. (2017) Microstructure analysis of tungsten carbide hardfacing on carbon steel blade. IOP Conf. Series : Materials Science and Engineering, 165 (012020). pp. 1-9. ISSN 1757-899X

Nanihar, Nadiarulah and Khalid, Amir and Mustaffa, Norrizal and Jaat, Norrizam and Sapit, Azwan and Razali, Azahari and Mohamed Sunar, Norshuhaila (2017) Experiment on the effects of storage duration of biodiesel produced from crude palm oil, waste cooking oil and Jatropha. Journal of Physics: Conference Series, 914 (1). pp. 1-8. ISSN 1742-6588

Ngadiron, Mohamad Faridzuan and Mohd Noor, Mohamad Ashraffudin and Hassan, Mohd Fahrul and Mohammad, Nur Adela and Shah Hamid, Saidatul Nabilah and Abd Rahim, Muhammad Syafiq (2017) 3 in 1 processor coconut dehusker machine. In: Engineering Design Project. Series 1. Penerbit UTHM, Batu Pahat, Johor, pp. 28-38. ISBN 9789670764986

Nordin, Normayati and Abdul Karim, Zainal Ambri and Othman, Safiah and Raghavan, Vijay R. and Batcha, Mohd Faizal Mohideen and Hariri, Azian and Basharie, Siti Mariam (2017) Flow characteristics of 3-D turning diffuser using particle image velocimetry. AIP Conference Proceedings, 1831 (NIL). pp. 1-9. ISSN 0094-243X

O

Ong, Pauline and Zainuddin, Zarita and Kee, Huong Lai (2017) A novel selection of optimal statistical features in the DWPT domain for discrimination of ictal and seizure‑free electroencephalography signals. Pattern Anal Application. pp. 1-13.

R

Ramli, Mohd Badli (2017) Study the effect of eggs incubation parameter through development of new experimental rig for IKTA quails species. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ramli, Mohd Badli (2017) Study the effect of eggs incubation parameter through development of new experimental rig for IKTA quails species. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ramli, Roslinda Hani (2017) Development of chitosan/alginate/silver nanoparticles hydrogel scaffold for soft tissue engineering applications. Masters thesis, Universiti Tun Hussein Onn Malaysia.

S

Samsi, Mohd Arif (2017) The effects of quenching and aging on the mechanical and physical properties of recycled aa6061 aluminum chips. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sapit, Azwan and Razali, Mohd Azahari and Hushim, Mohd Faisal and Jaat, Norrizam and Mohammad, Akmal Nizam and Khalid, Amir (2017) Comparision on dynamic behavior of diesel spray and rapeseed oil spray in diesel engine. Journal of Physics: Conference Series, 822 (1). pp. 1-7. ISSN 1742-6588

Sarwani, Muhamad Khairul Ilman (2017) Nickel aluminide coating as catalyst in steam methane reforming microreactor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Shukri, Muhammad Shazwan (2017) Collapsibility behaviour of ABS P400 and PMMA used as sacrificial pattern in direct investment casting process. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sies, M. Farid and Asmuin, Norzelawati and ., Fakhrulrazi and Norsalim, N.A. and Zakaria, Hanis and Pairan, Rasidi and Sadikin, Azmahani (2017) Determine physical properties of an organic citric acid (processed lime juice) dissolve with water using experimental apparatus. International Journal of Engineering and Technology (IJET), 8 (6). pp. 2530-2536. ISSN 2319-8613

Suhaimi, Muhamad Hafiz and Hassan, Mohd Fahrul and Amirudin, Mohamed Syafiz and Mohamad, Siti Shafika and Ahmad Shah, Mohamaed Hakim and Ngah, Muhammad (2017) Paper plate machine. In: Engineering Design Project. Series 2. Penerbit UTHM, Batu Pahat, Johor, pp. 69-80. ISBN 9789672110163

Sukarman, Muhammad Izwan and Hassan, Mohd Fahrul and Moktar, Muhammad Syukri Amri and Ramli, Mohamad Akmal and Jelani, Mohd Nashafizie and Ab Karim, Nurfarahnabila (2017) Multipurpose automatic Kerisik packaging machine. In: Engineering Design Project. Series 1. Penerbit UTHM, Batu Pahat, Johor, pp. 39-49. ISBN 9789670764986

Sumri, Muhamad Zamir and Anuar, Nurul Azwani and Hassan, Mohd Fahrul and Suhaini, Rozita and Ismail, Salmi and Syed Adnan, Syed Fadhil (2017) Wheelchair lifter. In: Engineering Design Project. Series 1. Penerbit UTHM, Batu Pahat, Johor, pp. 89-101. ISBN 9789670764986 (Submitted)

Surani, Mohammad Syakir and Md Yusof, Muhammad Shalihin and Hassan, Mohd Fahrul and Md Junoh, Mohd Safa Ruddin and Hadison, Shahrul Azni and Mohamed Rilwan, Reehana (2017) Loaf slicer machine. In: Engineering Design Project. Series 2. Penerbit UTHM, Batu Pahat, Johor, pp. 15-27. ISBN 9789672110163

T

Talib, Norfazillah (2017) Performance evaluation of biodegradable metalworking fluids for machining process. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Tukiman, Mohd Mustaqim (2017) Performances of a Spark Ignition (SI) engine fuelled with Liquefied Petroleum Gas (LPG) using Liquid Sequential Injection (LSI) technique. Masters thesis, Universiti Tun Hussein Onn Malaysia.

W

W. Salim, W.S.I. and Mahdi, A.A.M. and Ismail, M.I. and Abas, M.A. and Martinez-Botas, R.F. and Rajoo, S. (2017) Benefits of spark-ignition engine fuel-saving technologies under transient part load operations. Journal of Mechanical Engineering and Sciences, 11 (4). pp. 3027-3037. ISSN 2289-4659

Wan Zahari, Wan Zubaidie (2017) The effect of surface treatment on composite interface, tensile properties and water absorption of suger palm fiber/polypropylene composites. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Y

Yahya, Musli Nizam and Sambu, Mathan and Abdul Latif, Hanif and Mohd Junaih, Thuwaibah (2017) A study of acoustics performance on natural fibre composite. International Research and Innovation Summit, 226 (NIL). pp. 1-7. ISSN 1757-8981

Z

Zainudin, Amira Syuhada (2017) Dynamic weighted idle time heuristic for flowshop scheduling. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zaman, Izzuddin and Mohd Rozlan, Syaiful Azmirul and Shiau, Wei Chan and Yusoff, A. (2017) Theoritical modelling of sound radiation from plate. IOP Conference Series: Materials Science and Engineering, 165 (NIL). pp. 1-6. ISSN 1757-899X

Zulkarnain, Muhammad Harith Ifwat and Mohd Nazaruddin, Nur Azieyana and Zulkipli, Mohd Fazli and Ismail, Nurul Syahira and Hassan, Mohd Fahrul and Mohd Gaus, Nur Farah Hanan and Abdul Omar, Nurzhatul Aziemah (2017) Fish ball maker machine. In: Engineering Design Project. Series 1. Penerbit UTHM, Batu Pahat, Johor, pp. 15-27. ISBN 9789670764986