Items where Subject is "T Technology > TP Chemical technology > TP315-360 Fuel"

Article

A. Sharum, M. S. and Mansur, M. N. and Abdul Patar, M. A. and Nasir, Nurul Fitriah (2020) Design and fabrication of biodiesel mixer for the compatibility study of biodiesel blends with automotive part material. Fuel, Mixture Formation and Combustion Process, 2 (1). pp. 1-6. ISSN 2672-7331

Ab Rahman, Mazlinda and Othman, Mohd Hafiz Dzarfan and Wibisono, Yusuf and Harun, Zawati and F. Omar, Ahmad F. and Shabri, Hazrul A. and Deraman, Shahirah and Rahman, Mukhlis A. and Jaafar, Juhana and Ismail, Ahmad F. (2020) Effect of electrolyte thickness manipulation on enhancing carbon deposition resistance of methane-fueled solid oxide fuel cell. International Journal of Energy Research. pp. 1-19. ISSN 0363-907X

Abas, M. A. and Muhamad Said, M. F. and Zainal Abidin, S. F. and Zahari, I. (2015) Simulation of fuel economy for Malaysian urban driving. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2306-2316. ISSN 2229-8649

Abas, M.A. and Wan Salim, W.S. and Ismail, M.I. and Rajoo, S. and Martinez-Botas, R. (2017) Fuel consumption evaluation of SI engine using start-stop technology. Journal of Mechanical Engineering and Sciences, 11 (4). pp. 2967-2978. ISSN 2289-4659

Abdul Patar, Mohd Affifudin and Nasir, Nurul Fitriah and Osman, Shahrul Azmir (2020) Green calcium catalyst for biodiesel production: a review. Technology Reports of Kansai University, 62 (10). pp. 6227-6242. ISSN 0453-2199

Abdul Patar, Mohd Affifudin and Nasir, Nurul Fitriah and Osman, Shahrul Azmir and Mat Isa, Norasikin (2020) Optimization of Calcination Temperature of Eggshell Catalyst and Palm Oil Biodiesel Production for Blending of B10 Petroleum Diesel Fuel. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 69 (2). pp. 60-72. ISSN 2289-7879

Abdulrahman Oyekanmi, Adeleke and Abdul Latiff, Ab Aziz and Daud, Zawawi and Radin Mohamed, Radin Maya Saphira and Ab Aziz, Nur Adila and Ismail, Norli and Rafatullah, Mohd. and Ahmad, Akil and Hossain, Kaizar (2019) Adsorption of pollutants from palm oil mill effluent using natural adsorbents: optimization and isotherm studies. Desalination and Water Treatment, 169. pp. 181-190. ISSN 1944-3994

Amiril, S.A.S. and Rahim, E.A. and Syahrullail, S. (2017) A review on ionic liquids as sustainable lubricants in manufacturing and engineering: recent research, performance, and applications. Journal of Cleaner Production, 168. pp. 1571-1589. ISSN 0959-6526

Amirnordin, Shahrin Hisham and Sahari, M.F. and Khalid, Amir and Ahmad Shaffie, Muhammad Elyas Muiz and Muhammad Usman, Abdullahi (2020) Study the spray characteristic and mixture of diesel-water compare with biodiesel on fractal grid turbulence generated using schlieren method in burner system. Fuel, Mixture Formation and Combustion Process, 2 (1). pp. 1-7. ISSN 2672-7331

Arafa, S.A. and Mohd Ali, A.Z.B. and Abdul Awal, A.S.M. and Shamsuddin, Shamrul-Mar and Hossain, M. Zakaria (2018) Properties of coated and uncoated biomass aggregates and their effects on the strength and water permeability of pervious geopolymer concrete. International Journal of GEOMATE, 14 (41). pp. 44-51. ISSN 2186-2982

Baharuddin, Nurul Akidah and Abd. Rahman, Hamimah and Muchtar, Andanastuti and Sulong, Abu Bakar and Abdullah, Huda (2018) Effects of deposition time and counter-electrode size on the fabrication of lscf-sdc carbonate composite cathode for sofc. Sains Malaysiana, 43 (4). pp. 595-601. ISSN 0126-6039

Hazman, Nurhazwani and Mat Isa, Norasikin and Nasir, Nurul Fitriah and Mohd Yunos, Siti Nur Mariani (2020) Effect of air flow rate on the emission of burning coconut shell for biofuel product. Technology Reports of Kansai University, 62 (9). pp. 5829-5838. ISSN 0453-2198

Ismail, M. M. and Fawzi, M. and Zulkifli, F. H. and Osman, S. A. (2018) Effects of fuel ratio on performance and emission of diesel-compressed natural gas (CNG) dual fuel engine. Journal of the Society of Automotive Engineers Malaysia, 2 (2). pp. 157-165. ISSN 2600-8092

Ismail, Muammar Mukhsin and Mas, Fawzi and Theerayut, Leevijit and Zulkifli, Fathul Hakim and Osman, Shahrul Azmir and Taweekun, Juntakan (2020) Energy consumption and emissions of diesel-CNG dual fuel engine at high load operation. The International Journal of Integrated Engineering, 12 (2). pp. 253-260. ISSN 2229-838X

Ismail, Muammar Mukhsin and Mohd Ali, Mas Fawzi and Zulkifli, Fathul Hakim and Osman, Shahrul Azmir (2018) Cng-diesel dual fuel controlling concept for common rail diesel. International Journal of Integrated Engineering: Special Issue, 10 (3). pp. 88-92. ISSN 2229-838X

Jaat, Norrizam and Azizul, Muhamad Asri and Khalid, Amir and Ahmad Jais, Mohamad Harizat and Zainal Abidin, Shaiful Fadzil and Mustaffa, Norrizal and Ishak, Izuan Amin and Manshoor, Bukhari and Didane, Djamal Hissein and Zahari, Izzarief (2021) Investigation of performance characteristics of plastic pyrolysis oil and crude palm oil fuel on diesel engine. International Journal of Engineering Trends and Technology, 69 (12). ISSN 2231-5381

Jaat, Norrizam and Khalid, Amir and Andsaler, Adiba Rhaodah and Sapit, Azwan and Razali, Azahari and Basharie, Mariam (2017) Effects of ambient temperature and injection pressure on biodiesel ignition delay. Journal of Mechanical Engineering and Sciences, 11 (2). pp. 2723-2733. ISSN 2289-4659

Khalid, Amir and Manshoor, Bukhari and Mohmad Jaat, M. Norrizam and Tajuddin, A. S. A. and Syahrunniza, Hadi and Nursal, Ridwan Saputra and Zaman, I. (2017) Performance and emissions of diesel engine fuelled with preheated biodiesel fuel derived from crude palm, jatropha, and waste cooking oils. International Journal of Automotive and Mechanical Engineering, 14 (2). pp. 4273-4284. ISSN 2229-8649

Kidoguchi, Yoshiyuki and Nada, Yuzuru and Yano, Takayuki and Nakagiri, Misato (2013) Analysis of a high pressure diesel spray at high pressure and temperature environment conditions. Transactions of The Japan Society of Mechanical Engineers Series B, 79 (799). pp. 172-178. ISSN 0387-5016

Maksom, Mohammad Syahadan and Nasir, Nurul Fitriah and Asmuin, Norzelawati and Abd Rahman, Muhammad Faqhrurrazi and Khairulfuaad, Riyadhthusollehan (2020) Biodiesel composition effects on density and viscosity of diesel-biodiesel blend: a CFD study. CFD Letters, 12 (4). pp. 100-109. ISSN 2180-1363

Md Zain, Masniroszaime and Mohammad, Abdul Wahab and Harun, Shuhaida and Fauzi, Nurul Aina and Hairom, Nur Hanis Hayati (2018) Synergistic effects on process parameters to enhance enzymatic hydrolysis of alkaline oil palm fronds. Industrial Crops and Products, 122. pp. 617-626. ISSN 0926-6690

Mirus, Muhammad Farhan and Nasir, Nurul Fitriah and Taib, Ishkrizat and Hariri, Azian and Nordin, Normayati and Mat Isa, Norasikin (2019) A short review on biodiesel production and costing. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 53 (2). pp. 146-156. ISSN 2289-7879

Mohd Yunos, Akmal Haziq and Azmir, Nor Azali (2022) Octave band technique for noise measurement at the source, path, and receiver of gas turbines in oil and gas facilities. Pertanika Journal of Science & Technology, 30 (1). pp. 725-745. ISSN 0128-7680

Osman, Mohamad Hairi and Adnan, Suraya Hani and Yahya, Nur Faezah (2020) Potential of using palm oil fuel ash and expanded polystyrene as an alternative concrete substance. International Journal of Sustainable Construction Engineering and Technology, 11 (1). pp. 151-163. ISSN 2180-3242

Othaman, Muhamad Fazli and Sabudin, Sulastri and Mohideen Batcha, MohdFaizal (2016) A short review on biomass thermo chemical conversion: recent advances. International Journal of Engineering and Technology (IJET), 8 (6). pp. 2494-2499. ISSN 2319-8613

Razali, Mohd Azahari and Madon, Rais Hanizam and Mohmad Ja'at, Md Norrizam and Sapit, Azwan and Salleh, Hamidon and Hushim, Mohd Faisal and Zaboon, Waseem Alwan and Samsubaha, Muhammad Fauzi (2020) Investigation of diesel injector flow pattern based on computer-aided design. CFD Letters, 12 (5). pp. 13-23. ISSN 2180-1363

Samiran, N. A. and Mohd Jaafar, Mohammad Nazri and Ng, Jo-Han and Shiung, Lam Su and Tung, Chong Cheng (2016) Progress in biomass gasification technique – with focus on Malaysian palm biomass for syngas production. RENEWABLE & SUSTAINABLE ENERGY REVIEWS, 62. pp. 1047-1062. ISSN 1364-0321

Samiran, N. A. and Ng, Jo-Han and Mohd Jaafar, Mohammad Nazri and Valera-Medinad, Agustin and Tung, Chong Cheng (2017) Swirl stability and emission characteristics of CO-enriched syngas/air flame in a premixed swirl burner. PROCESS SAFETY AND ENVIRONMENTAL PROTECTION, 112. pp. 315-326. ISSN 0957-5820

Samiran, Nor Afzanizam and Abu Mansor, Khalil Firdaus and Abd Rashid, Razlin and Hamid, Muhammad Suhail Sahul (2023) CFD Simulation Analysis of Non-Premixed Combustion using a Novel AxialRadial Combined Swirler for Emission Reduction Enhancement. CFD Letters, 15 (6). pp. 1-11. ISSN 2180-1363

Sarwani, Muhamad Khairul Ilman and Fawzi, Mas Fawzi and Mokhtar, Muhamad Hanif and Osman, Shahrul Azmir (2020) Performance and emissions of 1.3l and 1.6l engines fueled with Gasoline and CNG at several vehicle speeds. TEST Engineeri & Management, 83. pp. 29133-29141. ISSN 0193-4120

Sharma, Abhishek and Singh Pali, Harveer and Kumar, Manish and Kumar Singh, Nishant and Abd Rahim, Erween and Singh, Yashvir and Kumar Gupta, Naveen (2022) Effect of α-aluminium oxide nano additives with Sal biodiesel blend as a potential alternative fuel for existing DI diesel engine. Energy & Environment. pp. 1-29.

Shuaib, Nasir and Mohamed, Maryati and Rusiman, Mohd Saifullah and Matias- Peralta, Hazel Monica and Abdur Rahim, Abdur Rahim (2020) Preliminary Studies on the fluctuation of the biomass of sizefractionated zooplankton in sea grass bed of Pulau Tinggi, Malaysia. Jordan Journal of Biological Sciences, 13. pp. 715-719. ISSN 1995-6673

W. Salim, W.S.I. and Mahdi, A.A.M. and Ismail, M.I. and Abas, M.A. and Martinez-Botas, R.F. and Rajoo, S. (2017) Benefits of spark-ignition engine fuel-saving technologies under transient part load operations. Journal of Mechanical Engineering and Sciences, 11 (4). pp. 3027-3037. ISSN 2289-4659

Zahari, I. and Abas, M. A. and Mat Arishad, N. I. and Zainal Abidin, S. F. and Muhamad Said, M. F. (2013) Experimental study to identify common engine part load conditions between Malaysian city driving and NEDC test. International Review of Mechanical Engineering (I.RE.M.E.), 7 (6).

Zakaria, Hanis and Khalid, Amir and Sies, Mohamad Farid and Mustaffa, Norrizal (2014) Overview effect of biodiesel storage on properties and characteristics. Applied Mechanics and Materials, 465. pp. 260-264. ISSN 1660-9336

Zakaria, Hanis and Khalid, Amir and Sies, Mohamad Farid and Mustaffa, Norrizal and B., Manshoor (2014) Effect of storage temperature and storage duration on biodiesel properties and characteristics. Applied Mechanics and Materials, 465. pp. 316-321. ISSN 1660-9336

Book Section

Abu Bakar, Muhammad Amirul Firdaus and Nadarajan, Arjunan and Khalid, Amir and Azizul, Muhamad Asri and Mohamed, Norirda and Mahmudin, Rahmah (2020) Simulation and modeling of the behavior in the four-stroke spark ignition engine by using CFD simulation. In: Fuel, Automotive and Engine Technology. Penerbit UTHM, pp. 95-100. ISBN 978-967-2916-32-1

Al-Gheethi, Adel and Ali Noman, Efaq and A. Talip, Balkis and Radin Mohamed, Radin Maya Saphira (2020) Microbial fuel cells: a green and alternative source for bioenergy production. In: Prospects of Fresh Market Wastes Management in Developing Countries. Springer Nature, pp. 1-11. ISBN 978-3-030-42641-5

Azhar, Muhammad Izzudin and Mohd Fazri, Azrul Fadzli and Khalid, Amir and Azizul, Muhamad Asri and Darlis, Nofrizalidris (2020) Research on the ultra-low emission technology in internal combustion engine. In: Fuel, Automotive and Engine Technology. Penerbit UTHM, pp. 73-82. ISBN 978-967-2916-32-1

Hakim, Mohd Ikmal and Fikrie, Mohamad and Hanis, Nur Zulaika and Khalid, Amir and Zaman, Izzuddin (2020) Effect of bio-degradable lubricating in the lubricant system of ICE engine. In: Fuel, Automotive and Engine Technology. Penerbit UTHM, pp. 43-50. ISBN 978-967-2916-32-1

Ithsan, Mohammad Zaki and Abu Bakar, Muhammad Azman and Khalid, Amir and Zainal Abidin, Shaiful Fadzil and Manshoor, Bukhari (2020) Engine performance characteristics and evaluation of variation in the length of intake plenum. In: Fuel, Automotive and Engine Technology. Penerbit UTHM, pp. 1-8. ISBN 978-967-2916-32-1

Maskan, Muhammad Haziq and Mohamad Yusuf, Mohamad Wafi and Khalid, Amir and Ishak, Izuan Amin and Zaman, Izzuddin and Sapit, Azwan (2017) Discussion of the technology and research in fuel injectors common rail system. In: Fuel, Automotive and Engine Technology. Penerbit UTHM, pp. 9-22. ISBN 978-967-2916-32-1

Mohd Badli, Muhammad Faizul Amri and Vicknasparran, Adam Nasuha and Khalid, Amir and Mustaffa, Norrizal and Ngadiron, Zuraidah and Mohamed Sunar, Norshuhaila (2020) Modern biomass-based transportation fuels from pyrolysis process, bio-ethanol, bio-methanol and bio-diesel. In: Fuel, Automotive and Engine Technology. Penerbit UTHM, pp. 51-62. ISBN 978-967-2916-32-1

Mohd Rodzi, Siti Nur Aizierah and Zanalli, Sophia and Khalid, Amir and Manshoor, Bukhari and Ngadiron, Zuraidah (2020) Evolution engine technology in exhaust gas recirculation for heavy-duty diesel engine. In: Fuel, Automotive and Engine Technology. Penerbit UTHM, pp. 31-42. ISBN 978-967-2916-32-1

Zainal, Helmi Faidzi and Vico Francis, Brandon and Khalid, Amir and Hushim, Mohd Faisal and Ngadiron, Zuraidah (2020) Research on mixture motion and combustion chamber of internal combustion engine. In: Fuel, Automotive and Engine Technology. Penerbit UTHM, pp. 83-94. ISBN 978-967-2916-32-1

Zainal, Rabi’atulawwaliah and Saiful Azam, Syafiqah Ruqaiyah and Khalid, Amir and Jaat, Norrizam and Amirnordin, Shahrin Hisham (2020) Identifying of the fuel-air mixing, mixture formation, ignition and combustion characteristic in the combustion chamber. In: Fuel, Automotive and Engine Technology. Penerbit UTHM, pp. 63-72. ISBN 978-967-2916-32-1

Zulhazmi, Ammar Naim and Azlan, Adi Maisur Aflah and Khalid, Amir and Mustaffa, Norrizal and Sulaiman, Syabillah and Razali, Azahari (2020) Effect of bio fuel on performance and emissions of spark ignition and compression ignition engines by running on a variety of bio-fuels. In: Fuel, Automotive and Engine Technology. Penerbit UTHM, pp. 23-30. ISBN 978-967-2916-32-1

Conference or Workshop Item

Jaat, Norrizam and Amir Khalid, Amir Khalid and Sulaiman, Syabillah and Azizul, Muhamad Asri and Mohamed, Norirda and Salleh, Hamidon and Razali, Azahari and Mohamed Sunar, Norshuhaila and Abdul Jalal, Rifqi Irzuan (2024) Effect of tire pyrolysis oil, crude palm biodiesel and engine speed on engine performance. In: AIP Conference Proceedings.

Mohd Yaacob, Nur Syuhada and Khalid, Amir and Jaat, Norrizam and Rhaodah Andsaler, Adiba and Azizul, Muhamad Asri and Sapit, Azwan (2024) Simulation and modelling of spray characteristics, spray penetration length and injection pressure of biodiesel. In: 5TH INTERNATIONAL CONFERENCE ON AUTOMOTIVE INNOVATION AND GREEN ENERGY VEHICLE 2022, AIGEV 2022.

Mohd Yaacob, Nur Syuhada and Khalid, Amir and Nursal, Ridwan Saputra and Jaat, Norrizam and Andsaler, Adiba Rhaodah and Azizul, Muhamad Asri and Manshoor, Bukhari and Zaman, Izzuddin (2024) Effects of ambient density and high injection pressure on the flow characteristics of biodiesel spray. In: AIP Conference Proceedings.

Nursal, Ridwan Saputra and Jaat, Norrizam and Khalid, Amir and Ishak, Izuan Amin and Zainal Abidin, Shaiful Fadzil and Manshoor, Bukhari and Samion, Syahrullail (2024) Influences of ambient temperature, injection pressure and spray characteristics on ignition delay and combustion process of palm oil and waste cooking oil. In: AIP Conference Proceedings.

S H, Adnan and N K, Zolkefli and M H, Osman and M L, Ahmad Jeni and Z, Jamellodin and N A, Abdul Hamid and A, Alisibramulisi and N, Abdul Roni and M N A, Nor Akasyah Performance in thermal conductivity of bricks containing palm oil fuel ash and expanded polystyrene beads. In: 5th International Conference on Civil and Environmental Engineering for Sustainability (IConCEES 2019), 19th and 20th of December 2019, Le Grandeur Palm Resort Senai, Johor.

Talib, N. and S. Rao, N. R. and Jamaluddin, N. A. and Abdullah, H. and Saleh, A. and Lee, W. K. and Ahmad, S. (2021) The performance of modified jatropha-based nanofluid during turning process. In: Proceedings of Green Design and Manufacture 2020, 23–24 July 2020, Arau, Malaysia.

Thesis

Abd Hadi, Syahrunniza (2015) Experimental study of the bio-additives in biodiesel fuel on performance and emissions characteristics of diesel engine. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Patar, Mohd Affifudin (2020) Eggshell catalyst assisted palm biodiesel production for blending of B10 blended diesel fuel. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Agustian, Egi (2012) Production of biodiesel from waste cooking oil using ultrasonic tubular reactor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Alwi Kutty, Nur Azureen (2020) Development of the porcelain tiles by the partial substitution of feldspar with fly ash. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Amat Azman, Putera Mohamad Adam (2020) Effect of start injection toward combustion, performances and emision characteristic of B20 biodiesel fuel. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Amir, Ahmad Irsyaduddin (2016) Pengaruh pemanduan bas rapid terhadap penggunaan bahan bakar. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Gamal Al-kaf, Hasan Ali (2018) Predictive model and near infrared spectroscopy in predicting the diesel fuel properties. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Isha Mudin, Azim (2015) Emission characteristic of small diesel engine fuelled by preheat biodiesel. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ishfaq, Rahila (2021) Synthesis and characterization of metal sulfates loaded palm empty fruit bunch for biodiesel production. Masters thesis, Universiti Tun Hussein Malaysia.

Ismail, Muammar Mukhsin (2021) Knock phenomenon analysis on a diesel-CNG dual fuel engine using experimental fuel ratio. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Jamaluddin, Nor Athira (2021) Tribological performance of jatropha oil-based nanofluids for orthogonal cutting process. Masters thesis, Universiti Tun Hussein Onn Malaysia.

K Frhan, Nhad (2021) CFD investigation on hydrogen enrichment effect to dual-fuel direct injection diesel engine. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

M. Gelim, Khalid. Ali. (2011) Mechanical and physical properties of fly ash foamed concrete. Masters thesis, Universiti Tun Hussein Malaysia.

Mohamad, Md Nor Anuar (2010) Efficiency analysis of automotive hydrogen internal combustion engine combined with a steam rankine cycle. Masters thesis, Nagaoka University of Technology.

Mohamad Redzuan, Nurul Adila (2015) Synthesis of molten salt as heat transfer fluid for waste heat recovery application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohammad, Siti Fairus (2021) Samarium strontium cobalt oxide – samarium doped ceria carbonate (SSC-SDCC) as a new potential composite cathode material for low temperature solid oxide fuel cell. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Yusoff, Nurrul Rahmah (2017) Continuous biodiesel process using ultrasonic in-line reactor for Jatropha Curcas Oil (JCO). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Zain, Norhidayah (2010) Development of palm oil-based fly ash powder-binder system for three-dimensional printing. Masters thesis, Universiti Tun Hussein Malaysia.

Mohmad Jaat, Md Norrizam (2020) The effect of fuel injection pressure and in cylinder temperature on igniton delay, combustion performance and emission. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mustaffa, Norrizal (2013) Effects of biodiesel fuel temperature on performance and emissions of a compression ignition (CI) engine. Masters thesis, Universiti Tun Hussein Malaysia.

Mustaffa, Norrizal (2013) Effects of biodiesel fuel temperature on performance and emissions of a compression ignition (CI) engine. Masters thesis, Universiti Tun Hussein Malaysia.

Nursal, Ridwan Saputra (2015) Performance and emissions characteristics of alternative biodiesel fuel on 4-stroke marine diesel engine. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Othaman, Muhamad Fazli (2018) Combustion of pelletized empty fruit bunch and oil palm shell in a swirling fluidized bed combustor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Praptijanto, Achmad (2011) Sonochemistry approach for a new process of biodiesel production from Jatropha Curcas Oil. Masters thesis, Universiti Tun Hussein Malaysia.

Sani, Winardi (2014) Multistage methanolysis of crude palm oil for biodiesel production in a pilot plant. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Shahabuddin, Nur Amanina (2020) Effects of high carbon dioxide concentration on oil palm growth and development. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sies, Mohamad Farid (2013) Development of the premixing injector in burner system. Masters thesis, Universiti Tun Hussein Malaysia.

Yong, Kok Wee (2007) Analysis of flow and heat transfer over louvered fins in compact geometries. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zakaria, Hanis (2013) Effects of storage temperature and storage duration of biodiesel properties, visual appearances and emision. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zulkifli, Abd Fathul Hakim (2019) Diesel-cng dual fuel combustion characterization using vibro-acoustic analysis and response surface methodology. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.