Items where Subject is "T Technology > TP Chemical technology"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type
Jump to: A | B | C | D | E | F | H | I | J | K | L | M | N | P | R | S | T | W | Y | Z
Number of items at this level: 110.

A

A. Hamid, Hazren and Heng, Yuan Hui and Harun, Hasnida and Mohamed Sunar, Norshuhaila and Hamidon, Nuramidah and Muhamad, Mimi Suliza and Ali, Roslinda and Jasmani, Latifah and Ahmad, Faridahanim (2020) Adsorption study of textile dye effluent using mixture of nanocrystalline cellulose and eggshell powder adsorbents. International Journal of Advanced Science and Technology, 29 (6s). pp. 1612-1624. ISSN 20054238

A. Rahman, Shahril Effendi (2019) Rawatan larut resapan menggunakan penjerap media komposit karbon teraktif, zeolit, batu kapur dan enapcemar sisa kertas. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

A. Sharum, M. S. and Mansur, M. N. and Abdul Patar, M. A. and Nasir, Nurul Fitriah (2020) Design and fabrication of biodiesel mixer for the compatibility study of biodiesel blends with automotive part material. Fuel, Mixture Formation and Combustion Process, 2 (1). pp. 1-6. ISSN 2672-7331

A. Talip, Balkis and J. Snelling, William and D. Sleator, Roy and Lowery, Colm and G. Dooley, James S. (2018) A rapid and sensitive system for recovery of nucleic acids from Mycobacteria sp. on archived glass slides. BMC MICROBIOLOGY, 18 (196). pp. 1-11. ISSN 1471-2180

Ab Rahman, Mazlinda and Othman, Mohd Hafiz Dzarfan and Fansuri, Hamzah and Harun, Zawati and Omar, Ahmad Faiq and Shabri, Hazrul Adzfar and Ravi, Jeganes and A Rahman, Mukhlis and Jaafar, Juhana and Ismail, Ahmad Fauzi and Osman, Nafisah (2020) Development of high-performance anode/electrolyte/cathode micro-tubular solid oxide fuel cell via phase inversion-based co-extrusion/ co-sintering technique. Journal of Power Sources, 467. pp. 1-11. ISSN 0378-7753

Abang Zaidel, Dayang Norulfairuz and Md Rashid, Jamaeyah and Hamidon, Nurul Hazirah and Md. Salleh, Liza and Mohd Kassim, Angzzas Sari (2017) Extraction and characterisation of pectin from dragon fruit (hylocereus polyrhizus) peels. Chemical engineering Transactions, 56. pp. 805-810. ISSN 2283-9216

Abd Halip, Juliana and Ibrahim, Azmi and Abdan, Khalina and Bakar, Edi Suhaimi and Karimi, Alinaghi and M. Tahir, Paridah and Choo, Adrian Cheng Yong (2015) Pre-drying optimization of oil palm veneers by response surface methodology. European Journal of Wood and Wood Products, 73 (4). pp. 493-498. ISSN 0018-3768

Abd Halip, Juliana and M. T., Paridah and Zaidon, A. and Abdul Khalil, H. P. S. (2015) Nonwood-based composites. Current Forestry Reports, 1. pp. 221-238. ISSN 2198-6436

Abd Rahman, Muhammad Faqhrurrazi and Asmuin, Nor Zelawati and Taib, Ishkrizat and Hidayat Mat, Mohamad Nur and Khairulfuaad, Riyadhthusollehan (2020) Influence of Actuator Nozzle Angle on the Flow Characteristics in Pressurized-Metered Dose Inhaler Using CFD. CFD Letters, 12 (6). pp. 67-79. ISSN 21801363

Abd Razak, Saiful Izwan and Hamzah, Mohd Syahir Anwar and Foong, Choi Yee and Abdul Kadir, Mohammed Rafiq and Mat Nayan, Nadirul Hasraf (2017) A review on medicinal properties of saffron toward major diseases. Journal of herbs, spices & medicinal plants. pp. 1-19. ISSN 1049-6475

Abdul Halim, Siti Fatimah and Zakaria, Zulkarnay and Pusppanathan, Jaysuman and Mohd Noor, Anas and Norali, Ahmad Nasrul and Rahiman, Mohd Hafiz Fazalul and Mohd Muji, Siti Zarina and Abdul Rahim, Ruzairi and Engku-Husna, Engku Ismail and Ali Hassan, Muhamad Khairul and Safar, Muhammad Juhairi Aziz and Salleh, Ahmad Faizal and Mat Som, Mohd Hanafi (2022) A review on magnetic induction spectroscopy potential for fetal acidosis examination. National Library of Medicine, 22 (4).

Abdul Hamid, Intan Sue Liana and Beh, Khi Khim and Mohamed Omar, Mohammad Faiz and Mohamad Zain, Khairu Anuar and Abd Rhaffor, Nuha and Hamid, Sofiyah Sal and Abd Manaf, Asrulnizam (2022) Three-dimensional soft material micropatterning via grayscale photolithography for improved hydrophobicity of Polydimethylsiloxane (PDMS). Micromachines, 13 (78). pp. 1-13. ISSN 2072-666X

Abdul Rashid, Azrin Hani (2015) Low velocity impact response of laminated textile coir-aramids/epoxy hybrid composites subjected to transverse penetration loading. Doctoral thesis, Universiti Sains Malaysia.

Abdul Wahid, Mohamad Nizam and Abd Razak, Saiful Izwan and Abdul Kadir, Mohammed Rafiq and Hassan, Rozita and Mat Nayan, Nadirul Hasraf and Mat Amin, Khairul Anuar (2018) Influence of citric acid on the physical and biomineralization ability of freezethaw poly(vinyl alcohol) hydrogel. Journal of Biomaterials Applications, 33 (1). pp. 94-102. ISSN 1530-802X

Abdullahi Ahmad, Kabiru (2019) Jatropha curcas oil as a bio-based rejuvenating agent for reclaimed asphalt pavement mixtures. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Abu Bakar, Muhammad Abdul Latiff and Aifat, N. R. and Yaakop, S. and Md Zain, B. M. (2017) A noninvasive molecular approach: exploiting species-locus-specific PCR primers in defeating numts and DNA cross-contamination of cercopithecidae. The Journal of Animal & Plant Sciences, 27 (3). pp. 1015-1053. ISSN 1018-7081

Adnan, Nur Atikah and Aman, Fazlina and Kandasamy, R. (2020) Lorentz Forces And Nano Particle Shapes On Water, Ethylene Glycol And Engine Oil Based Cu, Al2o3 And Swcnts. Jour of Adv Research in Dynamical & Control Systems, 12 (2). pp. 729-753. ISSN 1943-023X

Affandi, Iezzat Emeer and Suratman, Nur Haizarisha and Abdullah, Shakilah and Ahmad, Wan Azlina and Zakaria, Zainul Akmar (2014) Degradation of oil and grease from high-strength industrial effluents using locally isolated aerobic biosurfactant-producing bacteria. International Biodeterioration & Biodegradation, 95. pp. 33-40. ISSN 0964-8305

Agustian, Egi (2012) Production of biodiesel from waste cooking oil using ultrasonic tubular reactor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad, Azlinnorazi and Yunos, Muhamad Zaini and Harun, Zawati and Hassan, Mohd Fahrul and Adzila, Sharifah and Tajul Arifin, Ahmad Mubarak and Abdol Rahman, Mohd Nasrull and Abdul Haq, Reazul Haq and Baharulrazi, Norfhairna (2017) Performance of polysulfone/PANI membrane for humic acid separation. Chemical Engineering Transactions, 56. pp. 703-708. ISSN 2283-9216

Ahmad, Mohd Khairul and Chin, Fhong Soon and Nayan, Nafarizal and Suriani, A.B. and Mohamed, Azmi and Mamat, M. H. and Shimomura, Masaru and Murakami, K. (2018) Improvement in photo voltaic performance of rutile-phased TiO2 nanorod/nanoflower-based dye-sensitized solar cell. Journal of the Australian Ceramic Society, 54 (NIL). pp. 663-670. ISSN 2510-1560

Ahmad, Noor Aqilah and Kamdi, Zakiah and Mohd Tobi, Abdul Latif (2018) Wear and corrosion behavior of tungsten carbide based coating on carbon steel. International Journal of Integrated Engineering, 10 (4). pp. 119-125. ISSN 2600-7916

Al-Alimi, Sami and Lajis, Mohd Amri and Shamsudin, Shazarel and Chan, B.L. and Mohammed, Yahya and Ismail, Al Emran and Sultan, N. M. (2020) Development of metal matrix composites and related forming techniques by direct recycling of light metals: a review. International Journal of Integrated Engineering, 12 (1). pp. 144-171. ISSN 2600-7916

Anuar, Fatin Farhana and Md Zain, Badrul Aisham and Al-Shaibani, Najib (2018) Comparative study on flexible link aerator using arduino programming and dissolved oxygen meter. International Journal of Integrated Engineering, 10 (4). pp. 1-5. ISSN 2600-7916

Anwar Hamzah, Mohd Syahir and Abd Razak, Saiful Izwan and Abdul Kadir, Mohammed Rafiq and Mohd Bohari, Siti Pauliena and Mat Nayan, Nadirul Hasraf and Thangaraj Anand, Joseph Sahaya (2020) Fabrication and evaluation of polylactic acid/ pectin composite scaffold via freeze extraction for tissue engineering. JOURNAL OF POLYMER ENGINEERING, 40 (5). pp. 421-431. ISSN 21910340

Anwar Hamzah, Mohd Syahir and Abd Razak, Saiful Izwan and ZULKIFLI, AMIRA FARHANAH and ABD RAIS, ZATY HAZWANIE and Mat Nayan, Nadirul Hasraf (2020) SURFACE ENTRAPMENT OF COLLAGEN ON SINGLE LAYER POLYLACTIC ACID FILM CONTAINING SUSTAINABLE DRUG DELIVERY PROPERTIES FOR CORNEAL TISSUE ENGINEERING APPLICATION. Journal of Sustainability Science and Management, 15 (3). pp. 20-35. ISSN 2672-7226

Azmi, Mohd Azham (2012) Fabrication and characterisation of sandwich composites of glass fiber skin and polyurethane foamreinforced coconut coir fiber core. Masters thesis, Universiti Tun Hussein Malaysia.

B

Bala, Ibrahim Bakari and Saringat, Mohd Zainuri and Mustapha, Aida (2020) A hybrid word embedding model based on admixture of poisson-gamma latent dirichlet allocation model and distributed word-document- topic representation. Journal of Theoretical and Applied Information Technology, 98 (9). pp. 1446-1456. ISSN 1992-8645

Basri, Hatijah (2012) Development of hybrid antibacterial membrane by incorporating silver particle with 2,4,6-triaminopyrimidine as compatibilizer. Doctoral thesis, Universiti Teknologi Malaysia.

Bendjama, Adel and Abu Bakar, Mohd Fadzelly and Sabran, Siti Fatimah and Durumin Iya, Sani Garba (2020) Preparation and characterization of PMMA-AgNPs polymer composite as a dental prosthesis. Asian Journal of Chemistry, 32 (6). pp. 1451-1455. ISSN 0975427X

C

Cheah, D. W. and Ramlee, Normarina and Desa, Amira Liyana and Misdan, Nurasyikin and Hairom, Nur Hanis Hayati (2018) Performance of nanofiltration membrane for printing wastewater treatment. Journal of Applied Membrane Science & Technology, 22 (1). pp. 43-48. ISSN 2600-9226

D

Daud, Zawawi and Abubakar, Mahmoud Hijab and Abdul Latiff, Ab Aziz and Awang, Halizah and Ahmad, Zulkifli and Ridzuan, Mohd Baharudin (2018) COD and ammonia removal from landfill leachate using mixed granular adsorbent media. Jurnal Teknologi, 80 (4). pp. 81-86. ISSN 2180-3722

E

Elewe, Adel Muhsin (2014) Feasibility study on producing functional parts using molding technology. Masters thesis, Universiti Tun Hussein Onn Malaysia.

F

Fatmawati, Sri and Yuliana, Yuliana and Purnomo, Adi Setyo and Abu Bakar, Mohd Fadzelly (2020) Chemical constituents, usage and pharmacological activity of Cassia alata. Heliyon (6). pp. 1-11. ISSN 2405-8440

H

Hashim, Mohd Yussni and Mohd Amin, Azriszul and Marwah, Omar Mohd Faizan and Othman, Mohd Hilmi and Hanizan, Nurnajwa Hani and Norman, Mohd Khairul Efni (2020) Two parameters weibull analysis on mechanical properties of kenaf fiber under various conditions of alkali treatment. International Journal of Integrated EngineerinI, 12 (3). pp. 245-252. ISSN 2229-838X

Hauashdh, Ali and Radin Mohamed, Radin Maya Saphira and Jailani, Junaidah and Abd Rahman, Junita Stabilization of peat soil using fly ash, bottom ash and portland cement: soil improvement and coal ash waste reduction approach. In: The 5th International Conference on Civil and Environmental Engineering for Sustainability, Johor, Malaysia, 19-20 December 2019.

Hubadillah, Siti Khadijah (2015) Study on the gas performance of ceramic membrane from kaolin prepared by phase inversion technique. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hussin, Mohamed Saiful Firdaus and Mohd Serah, Aludin and Azlan, Khairul Azri and Abdullah, Hasan Zuhudi and Idris, Maizlinda Izwana and Ghazali, Ihwan and Mohd Shariff, Amir Husni and Nurul Huda, Nurul Huda and Azrul Abidin Zakaria, Azrul Abidin Zakaria (2021) A bibliometric analysis of the global trend of using alginate, gelatine, and hydroxyapatite for bone tissue regeneration applications. Polymers, 13 (647). pp. 1-17. ISSN 2073-4360

I

Iberahim, Suzilawati (2013) Design and development of pyrolysis system to produce wood vinegar. Masters thesis, Universiti Tun Hussein Malaysia.

Ibrahim, Mohd Halim Irwan (2012) Kebolehacuanan suntikan logam mikro SS 316L menggunakan bahan pengikat PEG dan PMMA Mohd. Doctoral thesis, Universiti Kebangsaan Malaysia.

Ibrahim, Mohd Halim Irwan and Kamarudin, Nurhafizah (2020) Green strength optimization of injection molding proces for novel recycle binder system using Taguchi method. International Journal of Integrated Engineering, 12 (4). pp. 182-190. ISSN 2229-838X

Ibrahim, Muhammad Shahrul Shafendy and Hashim, Nor Haslina (2018) Removal of oil and grease and anionic surfactants in synthetic car wash wastewater using kapok fiber: a batch-scale study. Malaysian Journal of Analytical Sciences (MJAS), 22 (4). pp. 1-7. ISSN 1394 - 2506

Ismail, Muhammad Yusri (2014) One-dimensional simulation of a retrofitted medium duty engine running using compressed natural gas. Masters thesis, Universiti Tun Hussein Onn Malaysia.

J

Jamalludin, Mohd Riduan (2014) Enhancement of antifouling properties using rice husk silica particles in polysulfone membrane and optimization of its operating condition. Masters thesis, Universiti Tun Hussein Malaysia.

Jamaluddin, Nor Athira and Talib, Norfazillah and Abdul Sani, Amiril Sahab (2020) Tribological analyses of modified jatropha oil with hBN and graphene nanoparticles as an alternative lubricant for machining process. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 76 (2). pp. 1-10. ISSN 2289-7879

Jamellodin, Zalipah and Abd Hamid, Hairu Azila and Abdul Hamid, Noor Azlina and Salleh, Norhafizah and Adnan, Suraya Hani (2021) The effect of curing conditions on the strength of masonry blocks incorporating palm oil fuel ash. Penerbit UTHM, UTHM.

Jayeola, Dare and Sufahani, Suliadi Firdaus and Ismail, Zuhaimy and W. Ahmad, Wan N. A. and Nor, Maria E. and Is-Moen, Muhaimin and Maselan, Norafiz (2018) Optimal risk computation on precious metal’s assets diversification. International Journal of Engineering & Technology, 7 (2). pp. 526-528. ISSN 2227-524X

K

Kabir, Mohd Hafizalrisman and Hamidon, Nuramidah and Awang, Mariah and Abdul Rahman, Mohammad Ashraf and Adnan, Suraya Hani (2022) An edible cutleries using green materials: sorghum flour. In: Green Infrastructure. Springer Link, pp. 305-317. ISBN 978-981-16-6382-6

Kabir Aliyu, Mohammed and Abd. Karim, Ahmad Tarmizi and Ming Chan, Chee and Nda, Muhammad In situ remediation of lead contaminated marine sediment using bentonite, kaolin and sand as capping materials. In: 5th International Conference on Civil and Environmental Engineering for Sustainability (IConCEES 2019), 19 - 20 December 2019, Le Grandeur Palm Resort, Johor Malaysia.

Kanasan, Nanthini and Sharifah Adzila, Syed Abu Bakar and Mustaffa, Nor Azimah and Abdol Rahman, Mohd Nasrull and Hassan, Mohd Fahrul and Panerselvan, Gurubaran (2018) Effect of sintering on hydroxyapatite/sodium alginate properties. International Journal of Integrated Engineering: Special Issue, 10 (3). pp. 78-82. ISSN 2229-838X

Kimpa, Mohammed Isah (2018) Physical and electrical properties of Li1+xTi2-xAlx(PO4)3 and Li1+2xTa1-xAlx+1(PO4)3 electrolytes. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Kormin, Shaharuddin (2018) Polyurethane foam from oil palm fruit waste: synthesis and characterization of biopolyol and foam properties. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

L

Lee, T.C. and Abdullah, H.Z. and Koshy, P. and Idris, M.I. (2018) Deposition of novel bioactive nanoflower-like sodium titanate on TiO2 coating via anodic oxidation for biomedical applications. Materials Letters, 216. pp. 256-260. ISSN 0167-577X

Lee, Te Chuan and Manap, Norpadzlihatun and Abdullah, Hasan Zuhudi and Idris, Maizlinda Izwana (2018) Polyvinyl alcohol-alginate adsorbent beads for chromium (vi) removal. International Journal of Engineering & Technology, 7 (3.2). pp. 95-99. ISSN 2227-524X

Lias, Jais and Mohd Fauzi, Muhammad Harith Fadhilah and Sahdan, Mohd Zainizan and Nayan, Nafarizal (2020) The effect of deposition time on the properties of titanium dioxide thin film prepared using CVD. In: ICETIR 2020, 2nd - 3rd September, 2020, Indonesia.

M

M. A., Azmah Hanim and N., Muhamad Kamil and Wei, Chuan Khang and T. T., Dele‑Afolabi and O., Saliza Azlina (2020) Microstructural and shear strength properties of RHA-reinforced Sn–0.7Cu composite solder joints on bare Cu and ENIAg surface finish. Journal of Materials Science: Materials in Electronics, 31. pp. 8316-8328. ISSN 0957-4522

M. Gelim, Khalid. Ali. (2011) Mechanical and physical properties of fly ash foamed concrete. Masters thesis, Universiti Tun Hussein Malaysia.

M. Rus, Anika Zafiah and Abdullah, Nur Munirah and Abdullah, M. F. L. (2019) Segmented phase of ultraviolet (UV) curable thermoset polyurethanes-graphite (TPU-G) composites. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8 (9S3). pp. 1490-1495. ISSN 2278-3075

M.F., Akhmazillah and M. R., Sarmidi and L., S. Chua (2011) Metabolite profiling of heat treated whole palm oil extract. Asian Journal of Food and Agro-Industry, 4 (2). pp. 132-140. ISSN 1906-3040

Mad Sahar, Nan (2010) Risk management for safety operation utilizing virtual reality simulation supported by intelligent HAZOP analysis. Doctoral thesis, Okayama University.

Madon, Rais Hanizam and Mohd Ali, Mas Fawzi and Sarwani, Khairul Ilman and Osman, Shahrul Azmir and Razali, Mohd Azahari and Mohammad, Abdul Wahab (2020) Effect of steam to carbon ratio (S:C) on steam methane reforming’s yield over coated nickel aluminide (Ni3Al) catalyst in micro reactor. Jurnal Kejuruteraan, 32 (4). pp. 657-662. ISSN 0128-0198

Makminin, Suhaimi and Othman, Sabariah and Mohd Yusuf, Siti Maisarah and Ismail, Siti Nur Bahirah (2020) Analysis of stevia extract and compare active functional group with other artificial sweetener; aspartame and sucralose. In: Application in Science and Technology. Penerbit UTHM, pp. 49-57. ISBN 978-967-2389-62-0

Mangi, Sajjad Ali and Jamaluddin, Norwati and Wan Ibrahim, Mohd Haziman and Abdullah, Abd Halid and Abdul Awal, A S M and Sohu, Samiullah and Ali, Nizakat (2017) Utilization of sugarcane bagasse ash in concrete as partial replacement of cement. IOP Conference Series: Materials Science and Engineering (MSE), 271 (NIL). pp. 1-8. ISSN 1757-8981

Mashuri, Muhammad Amirul Adli and Abd Rahman, Hamimah (2021) Fabrication of multilayers electrodes and electrolyte via screen printing for metal supported solid oxide fuel cell. Penerbit UTHM, UTHM.

Mat Beyi, Abdul Fattah and Ismail, Al Emran and Taib, Ishkrizat and Ibrahim, Mohd Norihan (2020) Stent Classifications and Effect of Geometries on Stent Behaviour Using Finite Element Method. International Journal of Mechanical Engineering and Robotics Research, 9 (3). pp. 329-340. ISSN 2278-0149

Md Dan, Mohd Firdaus and Muhamad, Edy Tonnizam and Komoo, Ibrahim and Alel, Mohd Nur Asmawisham (2015) Physical characteristics of boulders formed in the tropically weathered granite. Jurnal Teknologi Science and Engineering, 72 (3). pp. 75-82. ISSN 01279696

Meriam Suhaimy, Syazwan Hanani and Abd Hamid, Sharifah Bee and Chin, Wei Lai and Hasan, Md. Rakibul and Johan, Mohd Rafie (2016) TiO2 nanotubes supported Cu nanoparticles for improving photocatalytic degradation of simazine under UV illumination. Catalysts, 6 (167). pp. 1-16. ISSN 2073-4344

Mohamad, Md Nor Anuar (2010) Efficiency analysis of automotive hydrogen internal combustion engine combined with a steam rankine cycle. Masters thesis, Nagaoka University of Technology.

Mohd Adnan, Raudah and Panamasian, Logavimalan and Subsamamiam, Keshoothren and Ananthan, Kesavan (2020) Production of biogas using biomass. In: Application in Science and Technology. Penerbit UTHM, pp. 29-39. ISBN 978-967-2389-20-0

Mohd Ismail, Nurul Izzati and Mohd Ghazali, Jamilah and Fauzi, Basirah and Mohd Adnan, Raudah and Mohd Aripen, Nur Shahirah and Azeman, Nur Hasnatul Haniemah and Harun, Nur Hasanah and Mohamed, Norfatihah (2020) Garcinia atroviridis pastilles with anti-obesity potential. In: Application in Science and Technology. Penerbit UTHM, pp. 1-12. ISBN 978-967-2389-62-0

Mohd Kassim, Angzzas Sari and Mohd Aripin, Ashuvila and Ishak, Nadiah and Hairom, Nur Hanis Hayati and Fauzi, Noor Akhmazillah and Razali, Nor Faizah and Zainulabidin, Muhd Hafeez (2016) Potential of cogon grass (imperata cylindrica) as an alternative fibre in paper-based industry. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2681-2686. ISSN 1819-6608

Mohd Noor, Siti Fatimah and Muhamad, Aida and Abdul Halim, Norhazimah and Amri, Muhammad Akmal and Shaari Majed, Muhammad Amer Daneal and Abdullah, Dzul Izlee (2020) Lemon essential oil; the organic insect repellent. In: Construction Materials and Technology. Penerbit UTHM, pp. 59-70. ISBN 978-967-2389-62-0

Mohd Nor, Nur Zawin Nazihah and Kormin, Faridah and Mohamad Fuzi, Siti Fatimah Zaharah and Abu Bakar, Muhammad Abdul Latiff (2018) Comparison of physicochemical, antioxidant properties and sensory acceptance of puree from tamarillo and tomato. Journal of Science and Technology, 10 (3). pp. 25-31. ISSN 2229-8460

Mohd Said, Nor Damsyik and Sahdan, M.Z. and Nayan, Nafarizal and Saim, H. and Adriyanto, F. and Bakri, Anis Suhaili and Morsin, Marlia (2018) Difference in structural and chemical properties of sol–gel spin coated Al doped TiO2, Y doped TiO2 and Gd doped TiO2 based on trivalent dopants. RSC Advances, 8 (52). pp. 29686-29697. ISSN 2046-2069

Mohd Zain, Norhidayah (2010) Development of palm oil-based fly ash powder-binder system for three-dimensional printing. Masters thesis, Universiti Tun Hussein Malaysia.

Mohid, Siti Rahmah (2015) Photodegradation of biopolymer doped with titanium dioxide (TiO2) as ultraviolet (UV) stabilizer. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Muhamad, Mimi Suliza and Hamidon, Nuramidah and Salim, Mohd Razman and Yusop, Zulkifli and Lau, Woei Jye and Hadibarata, Tony Response surface methodology for modeling bisphenol A removal using ultrafiltration membrane system. Water Air Soil Pollution, 7 (1). pp. 1-11. ISSN 1573-2932

Muhammad Lutfi, Fatin Najihah and Mohamed Rehan, Maryam and Kamarudin, Kamarul Rahim and Che Zahri, Mohd Zulhafiz and Mohd Noor, Hanina and Mat Radzi, Salina (2018) Identification of bacteria associated with Holothuria (Mertensiothuria) leucospilota from Pangkor Island. Malaysian Applied Biology, 47 (2). pp. 95-101. ISSN 0126-8643

Mustaffa, Norrizal (2013) Effects of biodiesel fuel temperature on performance and emissions of a compression ignition (CI) engine. Masters thesis, Universiti Tun Hussein Malaysia.

Mustaffa, Norrizal (2013) Effects of biodiesel fuel temperature on performance and emissions of a compression ignition (CI) engine. Masters thesis, Universiti Tun Hussein Malaysia.

matuzahroh, Ni’ and Fitriani, Nurina and Ardiyanti, Putri Eka and Kuncoro, Eko Prasetyo and Budiyanto, Wahid Dian and Isnadina, Dwi Ratri Mitha and Wahyudianto, Febri Eko and Radin Mohamed, Radin Maya Saphira (2020) Behavior of schmutzdecke with varied filtration rates of slow sand filter to remove total coliforms. Heliyon, 6 (4). pp. 1-7. ISSN 2405-8440

N

Nahrowi, Nurul Nadjwa and Boon, Yih Hui and Shahriman, Mohamad Shariff and Yahaya, Noorfatimah and Mohd Zain, Nur Nadhirah and Asman, Saliza and Khan, Md Firoz and Sambasevam, Kavirajaa Pandian and Lim, Vuanghao and Raoov, Muggundha (2020) Determination of phenanthrene and fluoranthene in rice samples by activated carbon-based dispersive solid phase micro-extraction coupled with gas chromatography-flame ionization detector analysis. Malaysian Journal of Analytical Sciences, 24 (6). pp. 882-892.

Najah, M. I. and Razak, Aisyah and Che Shukur Nekmat, Nor Aida and Adzila, Sharifah and Othman, Raudhah and Nordin, Normayati (2020) Characterization of calcium carbonate extracted from eggshell waste at various calcination temperature. International Journal of Emerging Trends in Engineering Research, 8 (10). pp. 6725-6731. ISSN 2347-3983

Nomand, Efaq and Al-Gheethi, Adel and Radin Mohamed, Radin Maya Saphira and Talip, Balkis and Othman, Norzila and Hossain, Sohrab and N. Vo, Dai-Viet and Alduais, Nayef (2022) Inactivation of fungal spores from clinical environment by silver bio-nanoparticles; optimization, artificial neural network model and mechanism. Environmental Research, 204. pp. 1-15.

P

Praptijanto, Achmad (2011) Sonochemistry approach for a new process of biodiesel production from Jatropha Curcas Oil. Masters thesis, Universiti Tun Hussein Malaysia.

R

Radzi, N.M. and Latif, A.A. and Ismail, M.F. and Liew, J.Y.C. and Wang, E. and Lee, H.K. and Tamcheck, N. and Awang, Noor Azura and Ahmad, F. and Halimah, M.K. and Ahmad, H. (2020) Q-switched fiber laser based on CdS quantum dots as a saturable absorber. Results in Physics, 16. pp. 1-7. ISSN 2211-3797

Rehman, Hamid ur and Akhtar, Fahad and ul Haq, Qazi Inam and Ullah, Safi and Abbas, Azhar and Shoukat, Usman and Kormin, Faridah and Ahmad, Tauseef and Khan, Suleman and Khan, Muhammad (2018) Comparison of nutrients uptake in different varieties of rice in Pakistan. Journal of Engineering and Applied Sciences, 13 (2). 303- 308. ISSN 1816-949X

Roslan, Rosazrina and Mohamed Rehan, Maryam and Kamarudin, Kamarul Rahim and Mohd Noor, Hanina and Faujan, Nur Huda and Mat Radzi, Salina (2018) Isolation and identification of amylolytic bacteria from ragi. Malaysian Applied Biology, 47 (2). pp. 83-88. ISSN 2462-151X

Rosman, Nurafiqah and Wan Salleh, Wan Norharyati and Jamalludin, Mohd Riduan and Adam, Mohd Ridhwan and Ismail, Nor Hafiza and Jaafar, Juhana and Harun, Zawati and Ismail, Ahmad Fauzi (2021) Electrospinning parameters evaluation of PVDF-ZnO/Ag2CO3/Ag2O composite nanofiber affect on porosity by using response surface methodology. In: Regional Congress on Membrane Technology 2020 (RCOM 2020), Jan 24, 2021, UTM.

S

Sani Garba., Durumin Iya and Noh, Mohamad Zaky and Ab Razak, Siti Noraiza and Alwi Kutty, Nur Azureen (2018) Physico-mechanical properties of porcelain by substitution of quartz with POFA Treated with 2M Hcl acid. International Journal of Engineering & Technology, 7 (4.3). pp. 141-144. ISSN 2227-524X

Sarwani, Muhamad Khairul Ilman (2017) Nickel aluminide coating as catalyst in steam methane reforming microreactor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sazali, N. and Salleh, W. N. W. and Ismail, N. H. and Kumaran, K. and Othman, M. H. D. and Harun, Z. (2020) Advanced in carbon membrane by relating to coating-carbonization-cycles for oxygen performance. In: IOP Conf. Series: Materials Science and Engineering, WED, 3 NOV - FRI, 5 NOV, 2021, UMP. (Submitted)

Sazali, Norsuhailizah and Harun, Zawati and Abdullahi, Tijjani and Azhar, Faiz Hafeez and Ahmad, Azlinnorazia and Rasli, Nurul Izwanie and Sazali, Norazlianie (2022) Potential of transforming sodalite from synthesis kaolin with a mild condition of the hydrothermal method. Biointerface Research in Applied Chemistry, 12 (6). pp. 7376-7393. ISSN 2069-5837

Shahriman, Mohamad Shariff and Mohamad Zain, Nur Nadhirah and Mohamad, Sharifah and Abdul Manan, Ninie Suhana and Mohd Yaman, Suhaila and Asman, Saliza and Muggundha, Raoov (2018) Polyaniline modified magnetic nanoparticles coated with dicationic ionic liquid for effective removal of rhodamine B (RB) from aqueous solution. RSC Advances, 8 (58). pp. 33180-33192. ISSN 2046-2069

Shaifull Zaman, Sharmine Wani Zakirah and UNSPECIFIED (2021) Characterization and review of dual composite cathodes LSCF-SDC/YSZ-SDC for intermediate to low temperature solid oxide fuel cel. Penerbit UTHM, UTHM.

Suhani, Noorain and Radin Mohamed, Radin Maya Saphira and Abdul Latiff, Ab Aziz and Nasir, Nazlizan and Ahmad, Baharin and Abdulrahman Oyekanmi, Adeleke and Awang, Halizah and Daud, Zawawi (2020) Removal of COD and ammoniacal nitrogen by banana trunk fiber with chitosan adsorbent. Malaysian Journal of Fundamental and Applied Sciences, 16 (2). pp. 243-247. ISSN 2289-5981

Suriani, A. B. and Muqoyyanah, M. and Mohamed, A. and Othman, M. H. D. and Mamat, M. H. and Hashim, N. and Ahmad, M. K. and Nayan, N. and Abdul Khalil, H. P. S. (2018) Reduced graphene oxide-multiwalled carbon nanotubes hybrid film with low Pt loading as counter electrode for improved photovoltaic performance of dye-sensitised solar cells. Journal of Materials Science: Materials in Electronics, 29. pp. 10723-10743. ISSN 0957-4522

Syed Husin, Syarifah Aloyah and Muhammad, Farah Diana and Norizan, Siti Fatimah and Abd. Latif, Amirah and Awang, Noor Azura and Zulkifli, Mohd Zamani (2018) Narrow core standard single mode fiber for supercontinuum generation from graphene-based mode-locked pulses. Optik- International Journal for Light and Electron Optic, 172. pp. 347-352. ISSN 0030-4026

T

Teng, H.C. and Kok, B.C. and Uttraphan, C. and Yee, M.H. (2020) Performance enhancement of single-chamber sediment-microbial fuel cell with variation in cathode surface area. International Journal of Renewable Energy Research, 10 (1). pp. 512-518. ISSN 1309-0127

Thana Singam, Rupashinii and Marsi, Noraini and Mamat, Hasri and Mohd Rus, Anika Zafiah and Nasir, Siti Hana and Shaari, Muhammad Farid (2020) Physical properties of natural dyes based on lawsonia inermis, azadiractha indica and curcuma longa coated with superhydrphobic coating for textile applications. International Journal of Advanced Research in Engineering and Technology (IJARET), 11 (4). pp. 301-311. ISSN 0976-6480

Thiagarajan, Ganabpaty and Abdul Latif, Noradila and Mohd Joharudin, Nurul Farahin (2020) Preliminary study on crystallinity of rice husk ash reinforcement for metal matrix composite. Advanced Research in Natural Fibers, 2 (1). pp. 21-24. ISSN 2682-7410

W

Wan Jusoh, Wan Amizah and Che Rosely, Noor Ain Najihah and Adnan, Suraya Hani and Mohd Zuki, Sharifah Salwa and Shahidan, Shahiron (2022) The corrosion effect to metal structure influenced by microbial at oil and gas plant. In: Multidisciplinary Engineering Science and Advanced Technology. Penerbit UTHM, UTHM, pp. 19-33. ISBN 978-967-2817-40-6

Y

Yahaya, Shehu (2018) Development and characterization of treated kaolin filled polypropylene/kaolin nanocomposites. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Yashni, G. and Al-Gheethi, Adel and Radin Mohamed, Radin Maya Saphira and Arifin, Siti Nor Hidayah and Mohd Salleh, Siti Nor Aishah (2020) Photodegradation of basic red 51 in hair dye greywater by zinc oxide nanoparticles using central composite design. Reaction Kinetics, Mechanisms and Catalysis, 130. pp. 567-588. ISSN 1878-5190

Yee, Foong Choi and Anwar Hamzah, Mohd Syahir and Abd Razak, Saiful Izwan and Saidin, Syafiqah and Mat Nayan, Nadirul Hasraf (2018) Influence of poly(lactic acid) layer on the physical and antibacterial properties of dry bacterial cellulose sheet for potential acute wound healing materials. FIBERS AND POLYMERS, 19 (2). pp. 263-271. ISSN 1229-9197

Yunus, Zalilah Murni and G., Yashni and Al-Gheethi, Adel and Othman, Norzila and Hamdan, Rafidah and Ruslan, Nurun Najwa (2020) Advanced methods for activated carbon from agriculture wastes; a comprehensive review. International Journal of Environmental Analytical Chemistry. pp. 1-25. ISSN 0306-7319

Z

Z Abidin, Munira and Kourmentza, Constantina and K Karatzas, Andreas and Niranjan, Keshavan (2019) Enzymatic hydrolysis of thermally pre-treated chitin and antimicrobial activity of N,N′-diacetylchitobiose. Journal of Chemical Technology and Biotechnology, 94 (8). pp. 2529-2536. ISSN 0268-2575

Zainol Abidin, N.A and Kormin, Faridah and Anuar, Mohamed and A.F., N. (2020) Development and evaluation of polyherbal formulation for memory enhancement: study on its antioxidant properties and synergistic effects. Food Research, 4 (22). pp. 431-440. ISSN 2550-2166

Zalkepali, N U H H and Awang, Noor Azura and Yuzaile, Y R and Zakaria, Z and Latif, A A and Ali, A H and Mahmud, N N H E (2020) Tunable indium tin oxide thin film as saturable absorber for generation of passively Q-switched pulse erbium-doped fiber laser. Indian Journal of Physics, 95. pp. 733-739. ISSN 0019-5480

Zuhair, M. R. M. and Hamdan, A. and Irfan, A. R. (2020) Application of natural fibre composite in the aviation industry: a review. Journal of Aviation and Aerospace Technology, 2 (1). pp. 1-5.

This list was generated on Tue Jun 28 03:32:30 2022 +08.