Items where Subject is "T Technology > TP Chemical technology"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type
Number of items at this level: 173.

Article

A. Hamid, Hazren and Heng, Yuan Hui and Harun, Hasnida and Mohamed Sunar, Norshuhaila and Hamidon, Nuramidah and Muhamad, Mimi Suliza and Ali, Roslinda and Jasmani, Latifah and Ahmad, Faridahanim (2020) Adsorption study of textile dye effluent using mixture of nanocrystalline cellulose and eggshell powder adsorbents. International Journal of Advanced Science and Technology, 29 (6s). pp. 1612-1624. ISSN 20054238

A. Sharum, M. S. and Mansur, M. N. and Abdul Patar, M. A. and Nasir, Nurul Fitriah (2020) Design and fabrication of biodiesel mixer for the compatibility study of biodiesel blends with automotive part material. Fuel, Mixture Formation and Combustion Process, 2 (1). pp. 1-6. ISSN 2672-7331

A. Talip, Balkis and J. Snelling, William and D. Sleator, Roy and Lowery, Colm and G. Dooley, James S. (2018) A rapid and sensitive system for recovery of nucleic acids from Mycobacteria sp. on archived glass slides. BMC MICROBIOLOGY, 18 (196). pp. 1-11. ISSN 1471-2180

Ab Rahman, Mazlinda and Othman, Mohd Hafiz Dzarfan and Fansuri, Hamzah and Harun, Zawati and Omar, Ahmad Faiq and Shabri, Hazrul Adzfar and Ravi, Jeganes and A Rahman, Mukhlis and Jaafar, Juhana and Ismail, Ahmad Fauzi and Osman, Nafisah (2020) Development of high-performance anode/electrolyte/cathode micro-tubular solid oxide fuel cell via phase inversion-based co-extrusion/ co-sintering technique. Journal of Power Sources, 467. pp. 1-11. ISSN 0378-7753

Abang Zaidel, Dayang Norulfairuz and Md Rashid, Jamaeyah and Hamidon, Nurul Hazirah and Md. Salleh, Liza and Mohd Kassim, Angzzas Sari (2017) Extraction and characterisation of pectin from dragon fruit (hylocereus polyrhizus) peels. Chemical engineering Transactions, 56. pp. 805-810. ISSN 2283-9216

Abd Halip, Juliana and Ibrahim, Azmi and Abdan, Khalina and Bakar, Edi Suhaimi and Karimi, Alinaghi and M. Tahir, Paridah and Choo, Adrian Cheng Yong (2015) Pre-drying optimization of oil palm veneers by response surface methodology. European Journal of Wood and Wood Products, 73 (4). pp. 493-498. ISSN 0018-3768

Abd Halip, Juliana and M. T., Paridah and Zaidon, A. and Abdul Khalil, H. P. S. (2015) Nonwood-based composites. Current Forestry Reports, 1. pp. 221-238. ISSN 2198-6436

Abd Rahman, Muhammad Faqhrurrazi and Asmuin, Nor Zelawati and Taib, Ishkrizat and Hidayat Mat, Mohamad Nur and Khairulfuaad, Riyadhthusollehan (2020) Influence of Actuator Nozzle Angle on the Flow Characteristics in Pressurized-Metered Dose Inhaler Using CFD. CFD Letters, 12 (6). pp. 67-79. ISSN 21801363

Abd Razak, Saiful Izwan and Hamzah, Mohd Syahir Anwar and Foong, Choi Yee and Abdul Kadir, Mohammed Rafiq and Mat Nayan, Nadirul Hasraf (2017) A review on medicinal properties of saffron toward major diseases. Journal of herbs, spices & medicinal plants. pp. 1-19. ISSN 1049-6475

Abd Samad, Muhammad Izzuddin and Mohd Noor, Mimiwaty and Nayan, Nafarizal and Abu Bakar, Ahmad Shuhaimi and Mansor, Marwan and Mahmood Zuhdi, Ahmad Wafi and Hamzah, Azrul Azlan and Latif, Rhonira (2023) Effects of argon/nitrogen sputtering gas on the microstructural, crystallographic and piezoelectric properties of AlN thin films. Scripta Materialia, 226. pp. 1-7.

Abdul Halim, Siti Fatimah and Zakaria, Zulkarnay and Pusppanathan, Jaysuman and Mohd Noor, Anas and Norali, Ahmad Nasrul and Rahiman, Mohd Hafiz Fazalul and Mohd Muji, Siti Zarina and Abdul Rahim, Ruzairi and Engku-Husna, Engku Ismail and Ali Hassan, Muhamad Khairul and Safar, Muhammad Juhairi Aziz and Salleh, Ahmad Faizal and Mat Som, Mohd Hanafi (2022) A review on magnetic induction spectroscopy potential for fetal acidosis examination. National Library of Medicine, 22 (4).

Abdul Hamid, Intan Sue Liana and Beh, Khi Khim and Mohamed Omar, Mohammad Faiz and Mohamad Zain, Khairu Anuar and Abd Rhaffor, Nuha and Hamid, Sofiyah Sal and Abd Manaf, Asrulnizam (2022) Three-dimensional soft material micropatterning via grayscale photolithography for improved hydrophobicity of Polydimethylsiloxane (PDMS). Micromachines, 13 (78). pp. 1-13. ISSN 2072-666X

Abdul Wahid, Mohamad Nizam and Abd Razak, Saiful Izwan and Abdul Kadir, Mohammed Rafiq and Hassan, Rozita and Mat Nayan, Nadirul Hasraf and Mat Amin, Khairul Anuar (2018) Influence of citric acid on the physical and biomineralization ability of freezethaw poly(vinyl alcohol) hydrogel. Journal of Biomaterials Applications, 33 (1). pp. 94-102. ISSN 1530-802X

Abdullah, Abu Hannifa and Ismail, Zulhelmi and W. Idris, Wan Farhana and Ahmad Khusairi, Zulsyazwan and Mohd Zuhan, Mohd Khairul Nizam (2023) Combination of cellulose tissue paper and bleach-treated graphene in stiffness reinforcement of polyvinyl alcohol film. Diamond & Related Materials, 132. pp. 1-9. ISSN 109697

Abdullah, Abu Hannifa and Ismail, Zulhelmi and W. Idris, Wan Farhana and Ahmad Khusairi, Zulsyazwan and Mohd Zuhan, Mohd Khairul Nizam (2023) Combination of cellulose tissue paper and bleach-treated graphene in stiffness reinforcement of polyvinyl alcohol film. Diamond & Related Materials, 132. pp. 1-8. ISSN 109697

Abu Bakar, Muhammad Abdul Latiff and Aifat, N. R. and Yaakop, S. and Md Zain, B. M. (2017) A noninvasive molecular approach: exploiting species-locus-specific PCR primers in defeating numts and DNA cross-contamination of cercopithecidae. The Journal of Animal & Plant Sciences, 27 (3). pp. 1015-1053. ISSN 1018-7081

Adnan, Nur Atikah and Aman, Fazlina and Kandasamy, R. (2020) Lorentz Forces And Nano Particle Shapes On Water, Ethylene Glycol And Engine Oil Based Cu, Al2o3 And Swcnts. Jour of Adv Research in Dynamical & Control Systems, 12 (2). pp. 729-753. ISSN 1943-023X

Affandi, Iezzat Emeer and Suratman, Nur Haizarisha and Abdullah, Shakilah and Ahmad, Wan Azlina and Zakaria, Zainul Akmar (2014) Degradation of oil and grease from high-strength industrial effluents using locally isolated aerobic biosurfactant-producing bacteria. International Biodeterioration & Biodegradation, 95. pp. 33-40. ISSN 0964-8305

Ahmad, Azlinnorazi and Yunos, Muhamad Zaini and Harun, Zawati and Hassan, Mohd Fahrul and Adzila, Sharifah and Tajul Arifin, Ahmad Mubarak and Abdol Rahman, Mohd Nasrull and Abdul Haq, Reazul Haq and Baharulrazi, Norfhairna (2017) Performance of polysulfone/PANI membrane for humic acid separation. Chemical Engineering Transactions, 56. pp. 703-708. ISSN 2283-9216

Ahmad, Mohd Khairul and Chin, Fhong Soon and Nayan, Nafarizal and Suriani, A.B. and Mohamed, Azmi and Mamat, M. H. and Shimomura, Masaru and Murakami, K. (2018) Improvement in photo voltaic performance of rutile-phased TiO2 nanorod/nanoflower-based dye-sensitized solar cell. Journal of the Australian Ceramic Society, 54 (NIL). pp. 663-670. ISSN 2510-1560

Ahmad, Noor Aqilah and Kamdi, Zakiah and Mohd Tobi, Abdul Latif (2018) Wear and corrosion behavior of tungsten carbide based coating on carbon steel. International Journal of Integrated Engineering, 10 (4). pp. 119-125. ISSN 2600-7916

Ahmad, Siti Zu Nurain and Wan Salleh, Wan Norharyati and Yusof, Norhaniza and Mohd Yusop, Mohd Zamri and Hamdan, Rafidah and Ismail, Ahmad Fauzi (2023) Synthesis of zeolitic imidazolate framework-8 (ZIF-8) using different solvents for 2 lead and cadmium adsorption. -. pp. 1-32.

Al-Alimi, Sami and Lajis, Mohd Amri and Shamsudin, Shazarel and Chan, B.L. and Mohammed, Yahya and Ismail, Al Emran and Sultan, N. M. (2020) Development of metal matrix composites and related forming techniques by direct recycling of light metals: a review. International Journal of Integrated Engineering, 12 (1). pp. 144-171. ISSN 2600-7916

Anuar, Fatin Farhana and Md Zain, Badrul Aisham and Al-Shaibani, Najib (2018) Comparative study on flexible link aerator using arduino programming and dissolved oxygen meter. International Journal of Integrated Engineering, 10 (4). pp. 1-5. ISSN 2600-7916

Anwar Hamzah, Mohd Syahir and Abd Razak, Saiful Izwan and Abdul Kadir, Mohammed Rafiq and Mohd Bohari, Siti Pauliena and Mat Nayan, Nadirul Hasraf and Thangaraj Anand, Joseph Sahaya (2020) Fabrication and evaluation of polylactic acid/ pectin composite scaffold via freeze extraction for tissue engineering. JOURNAL OF POLYMER ENGINEERING, 40 (5). pp. 421-431. ISSN 21910340

Anwar Hamzah, Mohd Syahir and Abd Razak, Saiful Izwan and ZULKIFLI, AMIRA FARHANAH and ABD RAIS, ZATY HAZWANIE and Mat Nayan, Nadirul Hasraf (2020) SURFACE ENTRAPMENT OF COLLAGEN ON SINGLE LAYER POLYLACTIC ACID FILM CONTAINING SUSTAINABLE DRUG DELIVERY PROPERTIES FOR CORNEAL TISSUE ENGINEERING APPLICATION. Journal of Sustainability Science and Management, 15 (3). pp. 20-35. ISSN 2672-7226

Aslam Abdullah, Aslam Abdullah (2023) A Simulation Method of 2D Steady Scalar Convection-Diffusion Flow on an Exponentially Graded Mesh. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 105 (1). pp. 76-89. ISSN 2289-7879

Bala, Ibrahim Bakari and Saringat, Mohd Zainuri and Mustapha, Aida (2020) A hybrid word embedding model based on admixture of poisson-gamma latent dirichlet allocation model and distributed word-document- topic representation. Journal of Theoretical and Applied Information Technology, 98 (9). pp. 1446-1456. ISSN 1992-8645

Bendjama, Adel and Abu Bakar, Mohd Fadzelly and Sabran, Siti Fatimah and Durumin Iya, Sani Garba (2020) Preparation and characterization of PMMA-AgNPs polymer composite as a dental prosthesis. Asian Journal of Chemistry, 32 (6). pp. 1451-1455. ISSN 0975427X

Chan, Jia Xin and Wong, Joon Fatt and Hassan, Azman and Othman, Norhayani and Abd Razak, Jeefferie and Nirmal, Umar and Hashim, Shahrir and Chee Ching, Yern and Yunos, Muhamad Zaini and Yahaya, Ridwan and U. Gunathilake, T. M. Sampath (2022) Mechanical, thermal, tribological, and flammability properties of polybutylene terephthalate composites: Comparing the effects of synthetic wollastonite nanofibers, natural wollastonite, and graphene oxide. Journal Of Applied Polymer Sciene. pp. 1-17.

Chan, Jia Xin and Wong, Joon Fatt and Hassan, Azman and Othman, Norhayani and Abd Razak, Jeefferie and Nirmal, Umar and Hashim, Shahrir and Chee Ching, Yern and Yunos, Muhamad Zaini and Yahaya, Ridwan and U. Gunathilake, T. M. Sampath (2022) Mechanical, thermal, tribological, and flammability properties of polybutylene terephthalate composites: Comparing the effects of synthetic wollastonite nanofibers, natural wollastonite, and graphene oxide. Journal of Applied Polimer Science. pp. 1-17. ISSN e53463

Chan, Jia Xin and Wong, Joon Fatt and Hassan, Azman and Othman, Norhayani and Abd Razak, Jeefferie and Nirmal, Umar and Hashim, Shahrir and Chee Ching, Yern and Yunos, Muhamad Zaini and Yahaya, Ridwan and U. Gunathilake, T. M. Sampath (2023) Mechanical, thermal, tribological, and flammability properties of polybutylene terephthalate composites: Comparing the effects of synthetic wollastonite nanofibers, natural wollastonite, and graphene oxide. Applied Polymer. pp. 1-17.

Cheah, D. W. and Ramlee, Normarina and Desa, Amira Liyana and Misdan, Nurasyikin and Hairom, Nur Hanis Hayati (2018) Performance of nanofiltration membrane for printing wastewater treatment. Journal of Applied Membrane Science & Technology, 22 (1). pp. 43-48. ISSN 2600-9226

Daud, Zawawi and Abubakar, Mahmoud Hijab and Abdul Latiff, Ab Aziz and Awang, Halizah and Ahmad, Zulkifli and Ridzuan, Mohd Baharudin (2018) COD and ammonia removal from landfill leachate using mixed granular adsorbent media. Jurnal Teknologi, 80 (4). pp. 81-86. ISSN 2180-3722

Esa, M. Faizal and Main, Nor Mazlana and Roslan, M. Nazrul and Jasmani, Latifah and Kamarudin, Khairu (2023) CHEMICAL ANALYSIS DENDROCALAMUS ASPER BAMBOO AND SUITABILITY FOR PULP AND PAPER. ARPN Journal of Engineering and Applied Sciences, 18 (6). pp. 581-587. ISSN 1819-6608

Fatmawati, Sri and Yuliana, Yuliana and Purnomo, Adi Setyo and Abu Bakar, Mohd Fadzelly (2020) Chemical constituents, usage and pharmacological activity of Cassia alata. Heliyon (6). pp. 1-11. ISSN 2405-8440

Gupta, Reshu and Selvam, Janani and Vajravelu, Ashok and Nagapan, Sasitharan (2023) Analysis of a Squeezing Flow of a Casson Nanofluid between Two Parallel Disks in the Presence of a Variable Magnetic Field. Symmetry, 15 (120). pp. 1-17. ISSN 2073-8994

Hamed, N.K.A. and Nafarizal, N. and Ahmad, M.K. and Faridah, A.B. and Shimomura, M. (2023) Dominant co-exposed {101}/{111} facet of Er-doped rutile TiO2 film via hydrothermal doping. Materials Letters, 336. pp. 1-4.

Hanif, Hanifa and Shafie, Sharidan and Roslan, Rozaini and Ali, Anati (2023) Collision of hybrid nanomaterials in an upper-convected Maxwell nanofluid: A theoretical approach. Journal of King Saud University – Science, Yes (35).

Hanif, Hanifa and Shafie, Sharidan and Roslan, Rozaini and Ali, Anati (2023) Collision of hybrid nanomaterials in an upper-convected Maxwell nanofluid: A theoretical approach. Journal of King Saud University – Science, 35. pp. 1-13. ISSN 102389

Hashim, Mohd Yussni and Mohd Amin, Azriszul and Marwah, Omar Mohd Faizan and Othman, Mohd Hilmi and Hanizan, Nurnajwa Hani and Norman, Mohd Khairul Efni (2020) Two parameters weibull analysis on mechanical properties of kenaf fiber under various conditions of alkali treatment. International Journal of Integrated EngineerinI, 12 (3). pp. 245-252. ISSN 2229-838X

Hazman, Nurhazwani and Mat Isa, Norasikin and Nasir, Nurul Fitriah and Nordin, Normayati (2023) Combustion of Pulverized Coconut Shell in Lab-Scaled Incinerator Rig using CFD. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 103 (1). pp. 1-15. ISSN 2289-7879

Hussain Shah, Syed Asim and Asman, Saliza (2023) Evaluation of deep eutectic solvent as a new monomer for molecularly imprinted polymers for removal of bisphenol A. Journal of Polymer Research. pp. 1-16.

Hussin, Mohamed Saiful Firdaus and Mohd Serah, Aludin and Azlan, Khairul Azri and Abdullah, Hasan Zuhudi and Idris, Maizlinda Izwana and Ghazali, Ihwan and Mohd Shariff, Amir Husni and Nurul Huda, Nurul Huda and Azrul Abidin Zakaria, Azrul Abidin Zakaria (2021) A bibliometric analysis of the global trend of using alginate, gelatine, and hydroxyapatite for bone tissue regeneration applications. Polymers, 13 (647). pp. 1-17. ISSN 2073-4360

Ibrahim, Mohd Halim Irwan and Kamarudin, Nurhafizah (2020) Green strength optimization of injection molding proces for novel recycle binder system using Taguchi method. International Journal of Integrated Engineering, 12 (4). pp. 182-190. ISSN 2229-838X

Ibrahim, Muhammad Shahrul Shafendy and Hashim, Nor Haslina (2018) Removal of oil and grease and anionic surfactants in synthetic car wash wastewater using kapok fiber: a batch-scale study. Malaysian Journal of Analytical Sciences (MJAS), 22 (4). pp. 1-7. ISSN 1394 - 2506

Jamaluddin, Nor Athira and Talib, Norfazillah and Abdul Sani, Amiril Sahab (2020) Tribological analyses of modified jatropha oil with hBN and graphene nanoparticles as an alternative lubricant for machining process. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 76 (2). pp. 1-10. ISSN 2289-7879

Jayeola, Dare and Sufahani, Suliadi Firdaus and Ismail, Zuhaimy and W. Ahmad, Wan N. A. and Nor, Maria E. and Is-Moen, Muhaimin and Maselan, Norafiz (2018) Optimal risk computation on precious metal’s assets diversification. International Journal of Engineering & Technology, 7 (2). pp. 526-528. ISSN 2227-524X

Jian Rong Loh, Jian Rong Loh and Chang Phang, Chang Phang and Abdulnasir Isah, Abdulnasir Isah (2023) Numerical Solution for Arbitrary Domain of Fractional Integro-differential Equation via the General Shifted Genocchi Polynomials. Journal of Function Spaces. pp. 1-12.

Jong, Sze Hui and Abdullah, Norazlin and Muhammad, Norhayati (2023) Optimization of low-methoxyl pectin extraction from durian rinds and its physicochemical characterization. Carbohydrate Polymer Technologies and Applications, 5. pp. 1-13. ISSN 100263

Kanasan, Nanthini and Sharifah Adzila, Syed Abu Bakar and Mustaffa, Nor Azimah and Abdol Rahman, Mohd Nasrull and Hassan, Mohd Fahrul and Panerselvan, Gurubaran (2018) Effect of sintering on hydroxyapatite/sodium alginate properties. International Journal of Integrated Engineering: Special Issue, 10 (3). pp. 78-82. ISSN 2229-838X

Lee, T.C. and Abdullah, H.Z. and Koshy, P. and Idris, M.I. (2018) Deposition of novel bioactive nanoflower-like sodium titanate on TiO2 coating via anodic oxidation for biomedical applications. Materials Letters, 216. pp. 256-260. ISSN 0167-577X

Lee, Te Chuan and Manap, Norpadzlihatun and Abdullah, Hasan Zuhudi and Idris, Maizlinda Izwana (2018) Polyvinyl alcohol-alginate adsorbent beads for chromium (vi) removal. International Journal of Engineering & Technology, 7 (3.2). pp. 95-99. ISSN 2227-524X

M. A., Azmah Hanim and N., Muhamad Kamil and Wei, Chuan Khang and T. T., Dele‑Afolabi and O., Saliza Azlina (2020) Microstructural and shear strength properties of RHA-reinforced Sn–0.7Cu composite solder joints on bare Cu and ENIAg surface finish. Journal of Materials Science: Materials in Electronics, 31. pp. 8316-8328. ISSN 0957-4522

M. Rus, Anika Zafiah and Abdullah, Nur Munirah and Abdullah, M. F. L. (2019) Segmented phase of ultraviolet (UV) curable thermoset polyurethanes-graphite (TPU-G) composites. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8 (9S3). pp. 1490-1495. ISSN 2278-3075

M.F., Akhmazillah and M. R., Sarmidi and L., S. Chua (2011) Metabolite profiling of heat treated whole palm oil extract. Asian Journal of Food and Agro-Industry, 4 (2). pp. 132-140. ISSN 1906-3040

Madon, Rais Hanizam and Mohd Ali, Mas Fawzi and Sarwani, Khairul Ilman and Osman, Shahrul Azmir and Razali, Mohd Azahari and Mohammad, Abdul Wahab (2020) Effect of steam to carbon ratio (S:C) on steam methane reforming’s yield over coated nickel aluminide (Ni3Al) catalyst in micro reactor. Jurnal Kejuruteraan, 32 (4). pp. 657-662. ISSN 0128-0198

Mangi, Sajjad Ali and Jamaluddin, Norwati and Wan Ibrahim, Mohd Haziman and Abdullah, Abd Halid and Abdul Awal, A S M and Sohu, Samiullah and Ali, Nizakat (2017) Utilization of sugarcane bagasse ash in concrete as partial replacement of cement. IOP Conference Series: Materials Science and Engineering (MSE), 271 (NIL). pp. 1-8. ISSN 1757-8981

Marylin Miga, Marylin Miga and Jahari, Puteri Nur Syahzanani and Sivachandran Parimannan, Sivachandran Parimannan and Heera Rajandas, Heera Rajandas and Latiff, Muhammad Abu Bakar and Yap Jing Wei, Yap Jing Wei and Shamsir, Mohd Shahir and Mohd Salleh, Faezah (2023) Characterization of the nearly complete mitochondrial genome of ochraceous darkies, Euphaea ochracea Selys, 1859 (Odonata: Zygoptera: Euphaeidae) and phylogenetic analysis. MITOCHONDRIAL DNA PART B: RESOURCES, 8 (2). pp. 292-296.

Marylin Migaa, Marylin Migaa and Yong Zi Yapa, Yong Zi Yapa and Jaharia, Puteri Nur Syahzanani and Sivachandran Parimannan, Sivachandran Parimannan and Heera Rajandas, Heera Rajandas and Latifr, Muhammad Abu Bakar and Yap Jing Wei, Yap Jing Wei and Shamsir, Mohd Shahir and Mohd Salleha, Faezah (2023) Complete mitochondria! genome data and phylogenetic analysis of the Great Marquis, Bassarona dunya (Doubleday, 1848) (Lepidoptera: Nymphalidae: Limenitidinae) from Malaysia. MITOCHONDRIAL DNA, 8 (1). pp. 167-171.

Mat Beyi, Abdul Fattah and Ismail, Al Emran and Taib, Ishkrizat and Ibrahim, Mohd Norihan (2020) Stent Classifications and Effect of Geometries on Stent Behaviour Using Finite Element Method. International Journal of Mechanical Engineering and Robotics Research, 9 (3). pp. 329-340. ISSN 2278-0149

Md Dan, Mohd Firdaus and Muhamad, Edy Tonnizam and Komoo, Ibrahim and Alel, Mohd Nur Asmawisham (2015) Physical characteristics of boulders formed in the tropically weathered granite. Jurnal Teknologi Science and Engineering, 72 (3). pp. 75-82. ISSN 01279696

Md Nor, Shahidah and Phebe Ding, Phebe Ding and Tan Jit Chun, Tan Jit Chun (2023) Locule Position and Thawing Duration Affect Postharvest Quality of Freshly Cryo-Frozen Musang King Durian Fruit. TROPICAL AGRICULTURAL SCIENCE. pp. 1-12. ISSN 1511-3701

Meriam Suhaimy, Syazwan Hanani and Abd Hamid, Sharifah Bee and Chin, Wei Lai and Hasan, Md. Rakibul and Johan, Mohd Rafie (2016) TiO2 nanotubes supported Cu nanoparticles for improving photocatalytic degradation of simazine under UV illumination. Catalysts, 6 (167). pp. 1-16. ISSN 2073-4344

Migaa, Marylin and Yapa,, Yong Zi and Jaharia, Puteri Nur Syahzanani and Parimannanb, Sivachandran and Rajandasb, Heera and Latif, Muhammad Abu Bakar and Weid, Yap Jing and Shamsir, Mohd Shahir and Mohd Salleha, Faezah (2023) Complete mitochondria! genome data and phylogenetic analysis of the Great Marquis, Bassarona dunya (Doubleday, 1848) (Lepidoptera: Nymphalidae: Limenitidinae) from Malaysia. MITOGENOME ANNOUNCEMENT, 8 (1). pp. 1-5.

Mohamad Arifin, Nurliyana and Mohamad, Fariza and Hussin, Rosniza and Mohd Ismail, Anis Zafirah and Ahmad Ramli, Shazleen and Ahmad, Norazlina and Muhd Nor, Nik Hisyamudin and Sahdan, Mohd Zainizan and Mohammad Zain, Mohd Zamzuri and Izaki, Masanobu (2023) Annealing Treatment on Homogenous n-TiO2/ZnO Bilayer Thin Film Deposition as Window Layer for p-Cu2O-Based Heterostructure Thin Film. Coating, 13 (206). pp. 1-13.

Mohamad Arifin, Nurliyana and Mohamad, Fariza and Hussin, Rosniza and Mohd Ismail, Anis Zafirah and Ahmad Ramli, Shazleen and Ahmad, Norazlina and Muhd Nor, Nik Hisyamudin and Sahdan, Mohd Zainizan and Mohammad Zain, Mohd Zamzuri and Izaki, Masanobu (2023) Annealing Treatment on Homogenous n-TiO2/ZnO Bilayer Thin Film Deposition as Window Layer for p-Cu2O-Based Heterostructure Thin Film. coatings, 13 (206). pp. 1-13.

Mohamad Arifin, Nurliyana Mohamad and Mohamad, Fariza and Hussin, Rosniza and Mohd Ismai, Anis Zafirah and Ahmad Ramli, Shazleen and Ahmad, Norazlina and Muhd Nor, Nik Hisyamudin and Sahdan, Mohd Zainizan and Mohammad Zain, Mohd Zamzuri and Izaki, Masanobu (2023) Annealing Treatment on Homogenous n-TiO2/ZnO Bilayer Thin Film Deposition as Window Layer for p-Cu2O-Based Heterostructure Thin Film. Coatings, 13 (206). pp. 1-13.

Mohammed, Abdulrahman A. B. A. and Hasan, Zaimah and Borhana Omran, Abdoulhdi A. and M. Elfaghi, Abdulhafid and Khattak, M.A. and Ilyas, R. A. and Sapuan, S. M. (2023) Effect of Various Plasticizers in Different Concentrations on :Physical, Thermal, Mechanical, and Structural Properties of :Wheat Starch-Based Films. Polimers, 15 (63). pp. 1-21.

Mohd Kassim, Angzzas Sari and Mohd Aripin, Ashuvila and Ishak, Nadiah and Hairom, Nur Hanis Hayati and Fauzi, Noor Akhmazillah and Razali, Nor Faizah and Zainulabidin, Muhd Hafeez (2016) Potential of cogon grass (imperata cylindrica) as an alternative fibre in paper-based industry. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2681-2686. ISSN 1819-6608

Mohd Nor, Nur Zawin Nazihah and Kormin, Faridah and Mohamad Fuzi, Siti Fatimah Zaharah and Abu Bakar, Muhammad Abdul Latiff (2018) Comparison of physicochemical, antioxidant properties and sensory acceptance of puree from tamarillo and tomato. Journal of Science and Technology, 10 (3). pp. 25-31. ISSN 2229-8460

Mohd Said, Nor Damsyik and Sahdan, M.Z. and Nayan, Nafarizal and Saim, H. and Adriyanto, F. and Bakri, Anis Suhaili and Morsin, Marlia (2018) Difference in structural and chemical properties of sol–gel spin coated Al doped TiO2, Y doped TiO2 and Gd doped TiO2 based on trivalent dopants. RSC Advances, 8 (52). pp. 29686-29697. ISSN 2046-2069

Muhamad, Mimi Suliza and Hamidon, Nuramidah and Salim, Mohd Razman and Yusop, Zulkifli and Lau, Woei Jye and Hadibarata, Tony Response surface methodology for modeling bisphenol A removal using ultrafiltration membrane system. Water Air Soil Pollution, 7 (1). pp. 1-11. ISSN 1573-2932

Muhammad Lutfi, Fatin Najihah and Mohamed Rehan, Maryam and Kamarudin, Kamarul Rahim and Che Zahri, Mohd Zulhafiz and Mohd Noor, Hanina and Mat Radzi, Salina (2018) Identification of bacteria associated with Holothuria (Mertensiothuria) leucospilota from Pangkor Island. Malaysian Applied Biology, 47 (2). pp. 95-101. ISSN 0126-8643

Nahrowi, Nurul Nadjwa and Boon, Yih Hui and Shahriman, Mohamad Shariff and Yahaya, Noorfatimah and Mohd Zain, Nur Nadhirah and Asman, Saliza and Khan, Md Firoz and Sambasevam, Kavirajaa Pandian and Lim, Vuanghao and Raoov, Muggundha (2020) Determination of phenanthrene and fluoranthene in rice samples by activated carbon-based dispersive solid phase micro-extraction coupled with gas chromatography-flame ionization detector analysis. Malaysian Journal of Analytical Sciences, 24 (6). pp. 882-892.

Najah, M. I. and Razak, Aisyah and Che Shukur Nekmat, Nor Aida and Adzila, Sharifah and Othman, Raudhah and Nordin, Normayati (2020) Characterization of calcium carbonate extracted from eggshell waste at various calcination temperature. International Journal of Emerging Trends in Engineering Research, 8 (10). pp. 6725-6731. ISSN 2347-3983

Nomand, Efaq and Al-Gheethi, Adel and Radin Mohamed, Radin Maya Saphira and Talip, Balkis and Othman, Norzila and Hossain, Sohrab and N. Vo, Dai-Viet and Alduais, Nayef (2022) Inactivation of fungal spores from clinical environment by silver bio-nanoparticles; optimization, artificial neural network model and mechanism. Environmental Research, 204. pp. 1-15.

Nurhaziqaha, A.M.S. and Ahmad, M.K. and Faridah, A.B. and Saputri, D.G. and Ramli, S.A. and Mamatc, M.H. and Shimomura, M. (2023) Optimization of polymer blend electrolytes with tuneable conductivity potentials. Materials Letters. pp. 1-4. ISSN 133711

Nurliyana Mohamad Arifin, Nurliyana Mohamad Arifin and Fariza Mohamad, Fariza Mohamad and Rosniza Hussin, Rosniza Hussin and Anis Zafirah Mohd Ismail, Anis Zafirah Mohd Ismail and Shazleen Ahmad Ramli, Shazleen Ahmad Ramli and Norazlina Ahmad, Norazlina Ahmad and Nik Hisyamudin Muhd Nor, Nik Hisyamudin Muhd Nor and Mohd Zainizan Sahdan, Mohd Zainizan Sahdan (2023) Annealing Treatment on Homogenous n-TiO2/ZnO Bilayer Thin Film Deposition as Window Layer for p-Cu2O-Based Heterostructure Thin Film. Coatings. pp. 1-13.

Radzi, N.M. and Latif, A.A. and Ismail, M.F. and Liew, J.Y.C. and Wang, E. and Lee, H.K. and Tamcheck, N. and Awang, Noor Azura and Ahmad, F. and Halimah, M.K. and Ahmad, H. (2020) Q-switched fiber laser based on CdS quantum dots as a saturable absorber. Results in Physics, 16. pp. 1-7. ISSN 2211-3797

Raship, Nur Amaliyana and Mohd Tawil, Siti Nooraya and Nayan, Nafarizal and Ismail, Khadijah (2023) Effect of Al Concentration on Structural, Optical and Electrical Properties of (Gd, Al) Co-Doped ZnO and Its n-ZnO/p-Si (1 0 0) Heterojunction Structures Prepared via Co-Sputtering Method. Materials, 16 (2392). pp. 1-16.

Rehman, Hamid ur and Akhtar, Fahad and ul Haq, Qazi Inam and Ullah, Safi and Abbas, Azhar and Shoukat, Usman and Kormin, Faridah and Ahmad, Tauseef and Khan, Suleman and Khan, Muhammad (2018) Comparison of nutrients uptake in different varieties of rice in Pakistan. Journal of Engineering and Applied Sciences, 13 (2). 303- 308. ISSN 1816-949X

Reshu Gupta, Reshu Gupta and Janani Selvam, Janani Selvam and Ashok Vajravelu, Ashok Vajravelu and Sasitharan Nagapan, Sasitharan Nagapan (2023) Analysis of a Squeezing Flow of a Casson Nanofluid between Two Parallel Disks in the Presence of a Variable Magnetic Field. Symmetry, 15 (120). pp. 1-17.

Roslan, Rosazrina and Mohamed Rehan, Maryam and Kamarudin, Kamarul Rahim and Mohd Noor, Hanina and Faujan, Nur Huda and Mat Radzi, Salina (2018) Isolation and identification of amylolytic bacteria from ragi. Malaysian Applied Biology, 47 (2). pp. 83-88. ISSN 2462-151X

Samiran, Nor Afzanizam and Abu Mansor, Khalil Firdaus and Abd Rashid, Razlin and Hamid, Muhammad Suhail Sahul (2023) CFD Simulation Analysis of Non-Premixed Combustion using a Novel AxialRadial Combined Swirler for Emission Reduction Enhancement. CFD Letters, 15 (6). pp. 1-11. ISSN 2180-1363

Sani Garba., Durumin Iya and Noh, Mohamad Zaky and Ab Razak, Siti Noraiza and Alwi Kutty, Nur Azureen (2018) Physico-mechanical properties of porcelain by substitution of quartz with POFA Treated with 2M Hcl acid. International Journal of Engineering & Technology, 7 (4.3). pp. 141-144. ISSN 2227-524X

Sazali, Norsuhailizah and Harun, Zawati and Abdullahi, Tijjani and Azhar, Faiz Hafeez and Ahmad, Azlinnorazia and Rasli, Nurul Izwanie and Sazali, Norazlianie (2022) Potential of transforming sodalite from synthesis kaolin with a mild condition of the hydrothermal method. Biointerface Research in Applied Chemistry, 12 (6). pp. 7376-7393. ISSN 2069-5837

Shahriman, Mohamad Shariff and Mohamad Zain, Nur Nadhirah and Mohamad, Sharifah and Abdul Manan, Ninie Suhana and Mohd Yaman, Suhaila and Asman, Saliza and Muggundha, Raoov (2018) Polyaniline modified magnetic nanoparticles coated with dicationic ionic liquid for effective removal of rhodamine B (RB) from aqueous solution. RSC Advances, 8 (58). pp. 33180-33192. ISSN 2046-2069

Siti Juariah, Siti Juariah and Abu Bakar, Fazleen Izzany and Abu Bakar, Mohd Fadzelly and Susi Endrini, Susi Endrini (2023) Antibacterial potential of Curcuma caesia Roxb ethanol extract against nosocomial infections. Bali Medical Journal, 12 (2). pp. 1959-1963. ISSN 2089-1180

Sri Kartinil, Sri Kartinil and Siti Juariah, Siti Juariah and Dini Mardhiyani, Dini Mardhiyani and Abu Bakar, Moh Fadzelly and Abu Bakar, Fazleen Izzani and Susi Endrini, Susi Endrini (2023) Phytochemical Properties, Antioxidant Activity and a- Amilase Inhibitory of Curcuma Caesia. Journal of Advanced Research in Applied Sciences and Engineering Technology, 30 (1). pp. 255-263.

Suhani, Noorain and Radin Mohamed, Radin Maya Saphira and Abdul Latiff, Ab Aziz and Nasir, Nazlizan and Ahmad, Baharin and Abdulrahman Oyekanmi, Adeleke and Awang, Halizah and Daud, Zawawi (2020) Removal of COD and ammoniacal nitrogen by banana trunk fiber with chitosan adsorbent. Malaysian Journal of Fundamental and Applied Sciences, 16 (2). pp. 243-247. ISSN 2289-5981

Suriani, A. B. and Muqoyyanah, M. and Mohamed, A. and Othman, M. H. D. and Mamat, M. H. and Hashim, N. and Ahmad, M. K. and Nayan, N. and Abdul Khalil, H. P. S. (2018) Reduced graphene oxide-multiwalled carbon nanotubes hybrid film with low Pt loading as counter electrode for improved photovoltaic performance of dye-sensitised solar cells. Journal of Materials Science: Materials in Electronics, 29. pp. 10723-10743. ISSN 0957-4522

Susi Endrini, Susi Endrini and Abu Bakar, Fazleen Izzany and Abu Bakar, Mohd Fadzelly and Abdullah, Norazlin and Himmi Marsiati, Himmi Marsiati (2023) Phytochemical profiling, in vitro and in vivo xanthine oxidase inhibition and antihyperuricemic activity of Christia vespertilionis leaf. Biocatalysis and Agricultural Biotechnology, 48. pp. 1-9.

Syed Husin, Syarifah Aloyah and Muhammad, Farah Diana and Norizan, Siti Fatimah and Abd. Latif, Amirah and Awang, Noor Azura and Zulkifli, Mohd Zamani (2018) Narrow core standard single mode fiber for supercontinuum generation from graphene-based mode-locked pulses. Optik- International Journal for Light and Electron Optic, 172. pp. 347-352. ISSN 0030-4026

TENGKU ZARITH HAZLIN TENGKU ZAINAL ABIDIN, TENGKU ZARITH HAZLIN TENGKU ZAINAL ABIDIN and NURIN NAJMINA MAT ALI, NURIN NAJMINA MAT ALI and FAZLEEN IZZANY ABU BAKAR, FAZLEEN IZZANY ABU BAKAR and FAIZNUR AIN AHMAD BAKRI, FAIZNUR AIN AHMAD BAKRI (2023) Nutritional Composition and Antioxidant Activity of Freshwater Lobster in Malaysia: A Short Review. Asian Journal of Chemistry, 35 (2). pp. 1-4. ISSN 301-304

Teng, H.C. and Kok, B.C. and Uttraphan, C. and Yee, M.H. (2020) Performance enhancement of single-chamber sediment-microbial fuel cell with variation in cathode surface area. International Journal of Renewable Energy Research, 10 (1). pp. 512-518. ISSN 1309-0127

Thana Singam, Rupashinii and Marsi, Noraini and Mamat, Hasri and Mohd Rus, Anika Zafiah and Nasir, Siti Hana and Shaari, Muhammad Farid (2020) Physical properties of natural dyes based on lawsonia inermis, azadiractha indica and curcuma longa coated with superhydrphobic coating for textile applications. International Journal of Advanced Research in Engineering and Technology (IJARET), 11 (4). pp. 301-311. ISSN 0976-6480

Thiagarajan, Ganabpaty and Abdul Latif, Noradila and Mohd Joharudin, Nurul Farahin (2020) Preliminary study on crystallinity of rice husk ash reinforcement for metal matrix composite. Advanced Research in Natural Fibers, 2 (1). pp. 21-24. ISSN 2682-7410

W. C. Tan, W. C. Tan and E. A. Lim, E. A. Lim and E. M. Cheng, E. M. Cheng and W. H. Tan, W. H. Tan and H. A. Rahman, H. A. Rahman (2023) NUMERICAL ANALYSIS ON THE EFFECT OF DILUTED HYDROGEN FUEL BY A FIXED AMOUNT OF SUPPLIED HYDROGEN USING A QUASI-THREE-DIMENSIONAL SOLID OXIDE FUEL CELL MODEL. ARPN Journal of Engineering and Applied Sciences, 18 (6). pp. 609-614. ISSN 1819-6608

Wahab, Norhaliza and Abu Talib, Mohd Khaidir and Abd Malik, Ahmad Khairul and Madun, Aziman (2023) Effect of cement stabilized peat on strength, microstructure, and chemical analysis. Physics and Chemistry of the Earth, 129. pp. 1-7. ISSN 103348

Wahab, Norhaliza and Abu Talib, Mohd Khaidir and Abd Malik, Ahmad Khairul and Madun, Aziman (2023) Effect of cement stabilized peat on strength, microstructure, and chemical analysis. Physics and Chemistry of the Earth, 129. pp. 1-8.

Yashni, G. and Al-Gheethi, Adel and Radin Mohamed, Radin Maya Saphira and Arifin, Siti Nor Hidayah and Mohd Salleh, Siti Nor Aishah (2020) Photodegradation of basic red 51 in hair dye greywater by zinc oxide nanoparticles using central composite design. Reaction Kinetics, Mechanisms and Catalysis, 130. pp. 567-588. ISSN 1878-5190

Yee, Foong Choi and Anwar Hamzah, Mohd Syahir and Abd Razak, Saiful Izwan and Saidin, Syafiqah and Mat Nayan, Nadirul Hasraf (2018) Influence of poly(lactic acid) layer on the physical and antibacterial properties of dry bacterial cellulose sheet for potential acute wound healing materials. FIBERS AND POLYMERS, 19 (2). pp. 263-271. ISSN 1229-9197

Yunus, Zalilah Murni and G., Yashni and Al-Gheethi, Adel and Othman, Norzila and Hamdan, Rafidah and Ruslan, Nurun Najwa (2020) Advanced methods for activated carbon from agriculture wastes; a comprehensive review. International Journal of Environmental Analytical Chemistry. pp. 1-25. ISSN 0306-7319

Z Abidin, Munira and Kourmentza, Constantina and K Karatzas, Andreas and Niranjan, Keshavan (2019) Enzymatic hydrolysis of thermally pre-treated chitin and antimicrobial activity of N,N′-diacetylchitobiose. Journal of Chemical Technology and Biotechnology, 94 (8). pp. 2529-2536. ISSN 0268-2575

ZAINOL ABIDIN, N. ALYANI and KORMIN, F. and ZAINOL ABIDIN, N. AKHMA and ABU BAKAR, M.F. and IWANSYAH, ADE CHANDRA (2023) Anti-tyrosinase Activities of Curcumin-Chitosan Gold Nanoparticles Synthesized from Beetle (Oryctes rhinoceros). Asian Journal of Chemistry;, 35 (1). pp. 79-82.

Zainal Abidin, Munira and Konstantina Kourmentza, Konstantina Kourmentza and Keshavan Niranjan, Keshavan Niranjan (2023) Chitin Oligosaccharide N,N0 -Diacetylchitobiose (GlcNAc2) as Antimicrobial Coating against Listeria monocytogenes on Ready-to-Eat Shrimp. Sustainability, 15 (10099). pp. 1-11.

Zainol Abidin, N.A and Kormin, Faridah and Anuar, Mohamed and A.F., N. (2020) Development and evaluation of polyherbal formulation for memory enhancement: study on its antioxidant properties and synergistic effects. Food Research, 4 (22). pp. 431-440. ISSN 2550-2166

Zainol Abidin, Nurul Alyani and Kormin, Faridah and Zainol Abidin, Nurul Akhma and Abu Bakar, Mohd Fadzelly and Moujdin, Iqbal Ahmed (2023) Synthesis and Characterization of Curcumin-Chitosan Loaded Gold Nanoparticles by Oryctes rhinoceros’ Chitin for Cosmeceutical Application. Molecules, 28 (1799). pp. 1-12.

Zalkepali, N U H H and Awang, Noor Azura and Yuzaile, Y R and Zakaria, Z and Latif, A A and Ali, A H and Mahmud, N N H E (2020) Tunable indium tin oxide thin film as saturable absorber for generation of passively Q-switched pulse erbium-doped fiber laser. Indian Journal of Physics, 95. pp. 733-739. ISSN 0019-5480

Zuhair, M. R. M. and Hamdan, A. and Irfan, A. R. (2020) Application of natural fibre composite in the aviation industry: a review. Journal of Aviation and Aerospace Technology, 2 (1). pp. 1-5.

matuzahroh, Ni’ and Fitriani, Nurina and Ardiyanti, Putri Eka and Kuncoro, Eko Prasetyo and Budiyanto, Wahid Dian and Isnadina, Dwi Ratri Mitha and Wahyudianto, Febri Eko and Radin Mohamed, Radin Maya Saphira (2020) Behavior of schmutzdecke with varied filtration rates of slow sand filter to remove total coliforms. Heliyon, 6 (4). pp. 1-7. ISSN 2405-8440

Book Section

Kabir, Mohd Hafizalrisman and Hamidon, Nuramidah and Awang, Mariah and Abdul Rahman, Mohammad Ashraf and Adnan, Suraya Hani (2022) An edible cutleries using green materials: sorghum flour. In: Green Infrastructure. Springer Link, pp. 305-317. ISBN 978-981-16-6382-6

Makminin, Suhaimi and Othman, Sabariah and Mohd Yusuf, Siti Maisarah and Ismail, Siti Nur Bahirah (2020) Analysis of stevia extract and compare active functional group with other artificial sweetener; aspartame and sucralose. In: Application in Science and Technology. Penerbit UTHM, pp. 49-57. ISBN 978-967-2389-62-0

Mohd Adnan, Raudah and Panamasian, Logavimalan and Subsamamiam, Keshoothren and Ananthan, Kesavan (2020) Production of biogas using biomass. In: Application in Science and Technology. Penerbit UTHM, pp. 29-39. ISBN 978-967-2389-20-0

Mohd Ismail, Nurul Izzati and Mohd Ghazali, Jamilah and Fauzi, Basirah and Mohd Adnan, Raudah and Mohd Aripen, Nur Shahirah and Azeman, Nur Hasnatul Haniemah and Harun, Nur Hasanah and Mohamed, Norfatihah (2020) Garcinia atroviridis pastilles with anti-obesity potential. In: Application in Science and Technology. Penerbit UTHM, pp. 1-12. ISBN 978-967-2389-62-0

Mohd Noor, Siti Fatimah and Muhamad, Aida and Abdul Halim, Norhazimah and Amri, Muhammad Akmal and Shaari Majed, Muhammad Amer Daneal and Abdullah, Dzul Izlee (2020) Lemon essential oil; the organic insect repellent. In: Construction Materials and Technology. Penerbit UTHM, pp. 59-70. ISBN 978-967-2389-62-0

Wan Jusoh, Wan Amizah and Che Rosely, Noor Ain Najihah and Adnan, Suraya Hani and Mohd Zuki, Sharifah Salwa and Shahidan, Shahiron (2022) The corrosion effect to metal structure influenced by microbial at oil and gas plant. In: Multidisciplinary Engineering Science and Advanced Technology. Penerbit UTHM, UTHM, pp. 19-33. ISBN 978-967-2817-40-6

Conference or Workshop Item

Hauashdh, Ali and Radin Mohamed, Radin Maya Saphira and Jailani, Junaidah and Abd Rahman, Junita Stabilization of peat soil using fly ash, bottom ash and portland cement: soil improvement and coal ash waste reduction approach. In: The 5th International Conference on Civil and Environmental Engineering for Sustainability, Johor, Malaysia, 19-20 December 2019.

Kabir Aliyu, Mohammed and Abd. Karim, Ahmad Tarmizi and Ming Chan, Chee and Nda, Muhammad In situ remediation of lead contaminated marine sediment using bentonite, kaolin and sand as capping materials. In: 5th International Conference on Civil and Environmental Engineering for Sustainability (IConCEES 2019), 19 - 20 December 2019, Le Grandeur Palm Resort, Johor Malaysia.

Lias, Jais and Mohd Fauzi, Muhammad Harith Fadhilah and Sahdan, Mohd Zainizan and Nayan, Nafarizal (2020) The effect of deposition time on the properties of titanium dioxide thin film prepared using CVD. In: ICETIR 2020, 2nd - 3rd September, 2020, Indonesia.

Rosman, Nurafiqah and Wan Salleh, Wan Norharyati and Jamalludin, Mohd Riduan and Adam, Mohd Ridhwan and Ismail, Nor Hafiza and Jaafar, Juhana and Harun, Zawati and Ismail, Ahmad Fauzi (2021) Electrospinning parameters evaluation of PVDF-ZnO/Ag2CO3/Ag2O composite nanofiber affect on porosity by using response surface methodology. In: Regional Congress on Membrane Technology 2020 (RCOM 2020), Jan 24, 2021, UTM.

Sazali, N. and Salleh, W. N. W. and Ismail, N. H. and Kumaran, K. and Othman, M. H. D. and Harun, Z. (2020) Advanced in carbon membrane by relating to coating-carbonization-cycles for oxygen performance. In: IOP Conf. Series: Materials Science and Engineering, WED, 3 NOV - FRI, 5 NOV, 2021, UMP. (Submitted)

Thesis

A. Rahman, Shahril Effendi (2019) Rawatan larut resapan menggunakan penjerap media komposit karbon teraktif, zeolit, batu kapur dan enapcemar sisa kertas. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Abd Rahman, Muhammad Faqhrurrazi (2022) The improvement of pressurized metered-dose inhaler and spacers for treating respiratory diseases. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Manaf, Shoriya Aruni (2022) Cell immobilization of recombinant kluyveromyces lactis on carbon nanomaterial for the improvement of xylanase production. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Rashid, Azrin Hani (2015) Low velocity impact response of laminated textile coir-aramids/epoxy hybrid composites subjected to transverse penetration loading. Doctoral thesis, Universiti Sains Malaysia.

Abdullahi Ahmad, Kabiru (2019) Jatropha curcas oil as a bio-based rejuvenating agent for reclaimed asphalt pavement mixtures. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Abubakar Saleh, Umar (2022) Development and characterization of sandwich hybrid photovoltaic-thermoelectric generator using shingle as a thermal buffer for efficiency improvement. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Agustian, Egi (2012) Production of biodiesel from waste cooking oil using ultrasonic tubular reactor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Alipal, Janifal (2022) In vitro bioactivity of novel chitosan/gelatin/halloysite nanostructured coatings on anodised titanium via electrophoresation for bone implant. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Arifin, Siti Nor Hidayah (2021) Photocatalytic degradation of triclocarban in artificial bathroom greywater by modified tio₂ nanotubes coated with zeolite (TNTs/ZEO). Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Azmi, Mohd Azham (2012) Fabrication and characterisation of sandwich composites of glass fiber skin and polyurethane foamreinforced coconut coir fiber core. Masters thesis, Universiti Tun Hussein Malaysia.

Bakri, Anis Suhaili (2022) Mitigation of oxygen presence in AlN (100) & (002) growth using RF magnetron sputtering. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Basri, Hatijah (2012) Development of hybrid antibacterial membrane by incorporating silver particle with 2,4,6-triaminopyrimidine as compatibilizer. Doctoral thesis, Universiti Teknologi Malaysia.

Elewe, Adel Muhsin (2014) Feasibility study on producing functional parts using molding technology. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hubadillah, Siti Khadijah (2015) Study on the gas performance of ceramic membrane from kaolin prepared by phase inversion technique. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Iberahim, Suzilawati (2013) Design and development of pyrolysis system to produce wood vinegar. Masters thesis, Universiti Tun Hussein Malaysia.

Ibrahim, Mohd Halim Irwan (2012) Kebolehacuanan suntikan logam mikro SS 316L menggunakan bahan pengikat PEG dan PMMA Mohd. Doctoral thesis, Universiti Kebangsaan Malaysia.

Ismail, Muhammad Yusri (2014) One-dimensional simulation of a retrofitted medium duty engine running using compressed natural gas. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jamalludin, Mohd Riduan (2014) Enhancement of antifouling properties using rice husk silica particles in polysulfone membrane and optimization of its operating condition. Masters thesis, Universiti Tun Hussein Malaysia.

Kimpa, Mohammed Isah (2018) Physical and electrical properties of Li1+xTi2-xAlx(PO4)3 and Li1+2xTa1-xAlx+1(PO4)3 electrolytes. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Kormin, Shaharuddin (2018) Polyurethane foam from oil palm fruit waste: synthesis and characterization of biopolyol and foam properties. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Loke, Choy Yean (2008) Skill standards for biotechnology graduates in Malaysia: an industrial perspective. Masters thesis, Universiti Tun Hussein Onn Malaysia.

M. Gelim, Khalid. Ali. (2011) Mechanical and physical properties of fly ash foamed concrete. Masters thesis, Universiti Tun Hussein Malaysia.

Mad Sahar, Nan (2010) Risk management for safety operation utilizing virtual reality simulation supported by intelligent HAZOP analysis. Doctoral thesis, Okayama University.

Mohamad, Md Nor Anuar (2010) Efficiency analysis of automotive hydrogen internal combustion engine combined with a steam rankine cycle. Masters thesis, Nagaoka University of Technology.

Mohamad Jamil, Ahmad Syakir (2017) Study of kitchen hood water mist system for cooking emission (UL1046) filtration with low pressure delected nozzle. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Akhair, Siti Hajar (2022) The development of mixed-matrix membrane incorporated with reduced graphene oxide synthesized using murraya koenigii leaf for oil/water separation. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Aripin, Ashuvila (2022) Optimisation of biopulping process by bacteria from rhynchophorus ferrugineus on empty fruit bunch for pulp industry. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Rus, Anika Zafiah (2006) Thermal and photochemical degradation of polyurethanes based on renewable materials. Doctoral thesis, University of Warwick.

Mohd Salim, Nurul Syamimi (2017) Characterization of thermoset biopolymer in thermoplastic of low and high density polyethylene upon uv irradiation. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Zain, Norhidayah (2010) Development of palm oil-based fly ash powder-binder system for three-dimensional printing. Masters thesis, Universiti Tun Hussein Malaysia.

Mohid, Siti Rahmah (2015) Photodegradation of biopolymer doped with titanium dioxide (TiO2) as ultraviolet (UV) stabilizer. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Muniandy, Nagentrau (2017) Formulating the plastic deformation expression on coated substrate as a coating selection tool. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mustaffa, Norrizal (2013) Effects of biodiesel fuel temperature on performance and emissions of a compression ignition (CI) engine. Masters thesis, Universiti Tun Hussein Malaysia.

Mustaffa, Norrizal (2013) Effects of biodiesel fuel temperature on performance and emissions of a compression ignition (CI) engine. Masters thesis, Universiti Tun Hussein Malaysia.

Othman, Mohd Hilmi (2008) Injection moulding and thermal properties of polypropylene hinges. Masters thesis, Loughborough University.

Praptijanto, Achmad (2011) Sonochemistry approach for a new process of biodiesel production from Jatropha Curcas Oil. Masters thesis, Universiti Tun Hussein Malaysia.

Ridha Ali, Inas (2022) Mixed convection in a lid-driven enclosure filled with hybrid nanofluid by finite volume method. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Sadikin, Azmahani (2004) Modelling of the flow of refrigerant 134a in capillary tubes. Masters thesis, Cranfield University.

Sarwani, Muhamad Khairul Ilman (2017) Nickel aluminide coating as catalyst in steam methane reforming microreactor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sia, Chee Kiong (2002) Non-CFC refrigerants: first and second law efficienies. Masters thesis, Universiti Teknologi Malaysia.

Sockalingam, Kanageswary (2017) Extraction and characterizations of halal gelatin biopolymer from black tilapia bones and scales. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Sundra, Sargunan (2018) Development of a micromixing system for treatment of ORL 48 microtissues in different concentrations of cytochalasin B. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sunthrasakaran, Nishanthi (2022) Conductivity and morphological characteristics of untreated and alkali treated natural fibre reinforced lldpe-nr polymer composite. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Talib, Azman (2022) Enhancement of titanium dioxide (TiO2) dye-sensitized solar cells (DSSCs) performance with incorporation of reduced graphene oxide (rGO). Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Tan, Kian Meng (2021) Identification of polystyrene degrading bacteria and potential enzyme action from zophobas morio for improvement and sustainable biodegradation of waste. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Yahaya, Shehu (2018) Development and characterization of treated kaolin filled polypropylene/kaolin nanocomposites. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Yong, Kok Wee (2007) Analysis of flow and heat transfer over louvered fins in compact geometries. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Other

Jamellodin, Zalipah and Abd Hamid, Hairu Azila and Abdul Hamid, Noor Azlina and Salleh, Norhafizah and Adnan, Suraya Hani (2021) The effect of curing conditions on the strength of masonry blocks incorporating palm oil fuel ash. Penerbit UTHM, UTHM.

Mashuri, Muhammad Amirul Adli and Abd Rahman, Hamimah (2021) Fabrication of multilayers electrodes and electrolyte via screen printing for metal supported solid oxide fuel cell. Penerbit UTHM, UTHM.

Shaifull Zaman, Sharmine Wani Zakirah and UNSPECIFIED (2021) Characterization and review of dual composite cathodes LSCF-SDC/YSZ-SDC for intermediate to low temperature solid oxide fuel cel. Penerbit UTHM, UTHM.

This list was generated on Fri Mar 29 13:41:07 2024 +08.