Items where Subject is "T Technology > TP Chemical technology > TP155-156 Chemical engineering"

A

A. Jalil, Aishah and Triwahyono, Sugeng and Adam, S. Hazirah and Rahim, N. Diana and A. Aziz, M. Arif and Hairom, Nur Hanis Hayati and M. Razali, N. Aini and A.Z. Abidin, Mahani and A. Mohamadiah, M. Khairul (2010) Adsorption of methyl orange from aqueous solution onto calcined Lapindo volcanic mud. Journal of Hazardous Materials, 181 (1-3). pp. 755-762. ISSN 0304-3894

ABDUL-MANAN, MUHAMMAD NURISMADEE and MOHD-RIDWAN, ABD RAHMAN and AIFAT, NOR RAHMAN and OSMAN, NUR AZIMAH and Abdul-Latiff, Muhammad Abu Bakar and DHARMALINGAM, SABAPATHY and MD-ZAIN, BADRUL MUNIR (2020) Short Communication: Effectiveness of nuclear gene in species and subspecies determination of captive orangutans. BIODIVERSITAS, 21 (8). pp. 3665-3669. ISSN 1412-033X

Ab Mannan, Nurhabibah Nabilah and Razali, Sufia Aqilah and Shamsuddin, Suhadir and Noh, Mohamad Zaky and Mohamed, Zakiah (2018) Effect of Co3+ substitution on electro-magnetic properties of Pr0.75Na0.25mno3 and Nd0.75Na0.25mno3 manganites. International Journal of Engineering and Technology, 7 (4.3). pp. 389-392. ISSN 2227-524X

Abang Zaidel, Dayang Norulfairuz and Md Rashid, Jamaeyah and Hamidon, Nurul Hazirah and Md. Salleh, Liza and Mohd Kassim, Angzzas Sari (2017) Extraction and characterisation of pectin from dragon fruit (hylocereus polyrhizus) peels. Chemical engineering Transactions, 56. pp. 805-810. ISSN 2283-9216

Abd Rahim, Rahimah (2013) Effect of physical and mechanical properties of PU biopolymer membranes upon use of different fabrication techniques. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Wahid, Mohamad Nizam and Abd Razak, Saiful Izwan and Abdul Kadir, Mohammed Rafiq and Hassan, Rozita and Mat Nayan, Nadirul Hasraf and Mat Amin, Khairul Anuar (2018) Influence of citric acid on the physical and biomineralization ability of freezethaw poly(vinyl alcohol) hydrogel. Journal of Biomaterials Applications, 33 (1). pp. 94-102. ISSN 1530-802X

Abdulhameed, Mohammed Abdulmunem and Othman, Mohd Hafiz Dzarfan and Al Joda, Haider Nadhom Azziz and Ismail, Ahmad Fauzi and Matsuura, Takeshi and Harun, Zawati and A. Rahman, Mukhlis and Puteh, Mohd Hafiz and Jaafar, Juhana (2017) Fabrication and characterization of affordable hydrophobic ceramic hollow fibre membrane for contacting processes. Journal of Advanced Ceramics, 6 (4). pp. 330-340. ISSN 2226-4108

Abdullah, Abu Hannifa and Ismail, Zulhelmi and W. Idris, Wan Farhana and Ahmad Khusairi, Zulsyazwan and Mohd Zuhan, Mohd Khairul Nizam (2023) Combination of cellulose tissue paper and bleach-treated graphene in stiffness reinforcement of polyvinyl alcohol film. Diamond & Related Materials, 132. pp. 1-9.

Adiat, I. Arogundade and S.M.Megat-Yusoff, Puteri and Ahmad, Faiz and H.Bhat, Aamir and O.Afolabi, Lukmon (2021) Modification of bauxite residue with oxalic acid for improved performance in intumescent coatings. Journal of Materials Research and Technology, 12. pp. 679-687.

Adnan, Suraya Hani and Abadalla, Musab Alfatih Salim and Jamellodin, Zalipah (2017) The mechanical and physical properties of concrete containing polystyrene beads as aggregate and palm oil fuel ash as cement replacement material. AIP Conference Proceedings, 1891 (1). pp. 1-6. ISSN 0094-243X

Al-Alimi, Sami and Lajis, M. A. and Shamsudin, S. and Chan, B. L. and Rady, Mohammed. H. and Al-Zeqri, Musleh and Wahib, Ahmed and Aladani, Abdalkarim and Ali, Abdulaziz and Yusuf, Nur Kamilah (2021) Response Surface Methodology (RSM) implementation in zro particles reinforced aluminium chips by Hot Equal Channel Pressing (ECAP). In: Intelligent Manufacturing and Mechatronics. Springer Link, pp. 959-974.

Ali, Ahmad Hadi and Pauzi, Nurul Syafiqah (2018) Characterization of CrAg Bi-layer thin metal contacts sputter deposited on N-type si semiconductor. International Journal of Engineering & Technology, 7 (4.3). pp. 326-329. ISSN 2227-524X

Alwi Kutty, Nur Azureen and Noh, Mohamad Zaky and Mayzan, Mohd Zul Hilmi and Durumin Iya, Sani Garba (2018) Influence of different compositions of fly ash as fluxing agent in porcelain. International Journal of Current Science, Engineering & Technology. pp. 367-372. ISSN 2581-4311

Alwi Kutty, Nur Azureen and Noh, Mohamad Zaky and Mayzan, Mohd Zul Hilmi and Durumin Iya, Sani Garba (2018) Influence on the phase formation and strength of porcelain by partial substitution of fly ash compositions. International Journal of Engineering & Technology, 7 (4.3). pp. 271-275. ISSN 2227-524X

Asman, Saliza and Abas, Nur Azlie (2018) Triton X-100β-Cyclodextrin cloud point extraction for removal of phenol using different of sodium salts as inducing phase separation agent. Asian Journal of Chemistry, 30 (6). pp. 1299-1305. ISSN 0097-0707

Azmi, Muhammad Syazwan and Teng, Siaw Lin and Tajarudin, Husnul Azan and Makhtar, Muaz Mohd Zaini and Daud, Zawawi (2018) Characterisation of calcium carbonate formed by Bacillus Sphaericus via fermentation of urea. International Journal of Integrated Engineering, 10 (9). pp. 32-37. ISSN 2229-838X

B

Bhari, Bibi Zulaika and Ali, Ahmad Hadi (2018) Effects of pulsed Nd:YAG laser on Pt/Ag thin film metal contacts. International Journal of Engineering & Technology, 7 (4.3). pp. 291-294. ISSN 2227-524X

D

Darwish, Mohamad and Aris, Azmi and Puteh, Mohd Hafiz and Abdul Kadir, Aeslina and Mohamed Najib, Mohamed Zuhaili and Mustafa, Shaymaa (2020) Phosphorus extraction from fish waste bones ash by acidic leaching method. Asian Journal of Water, Environment and Pollution, 17 (2). pp. 1-6. ISSN 0972-9860

Daud, Zawawi and Abubakar, Mahmoud Hijab and Awang, Halizah and Ahmed, Zainab Belel and Rosli, Mohd Arif and Ridzuan, Mohd Baharudin and Aliyu, Ruwaida and Tajarudin, Husnul Azan (2018) Optimization of batch conditions for COD and ammonia nitrogen removal using cockle shells through response surface methodology. International Journal of Integrated Engineering, 10 (9). pp. 72-78. ISSN 2229-838X

E

Eng, Pei Ying (2018) Evaluation of the performance of granular fertilizer boom sprayer through computational fluid-particles-dynamid CFD simulation and scaled-down model analysis. Masters thesis, Universiti Tun Hussein Onn Malaysia.

F

Fadzil, N.F. and Abu Bakar, M.F. and Yusop, M.H.M. and Abu Bakar, F.I. (2020) Sensorial and physicochemical characteristics of herbal noodle enriched with centella asiatica. Food Research, 4 (4). pp. 1030-1037. ISSN 2550-2166

Fitri, Muhamad (2019) The effect of chemical treatment, fibre length, fibre content and injection moulding parameters to uv irradiation resistance of oil palm fibre reinforced composites. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

G

Ghazali, Muhammad Ihsan (2019) Microemulsions containing centella asiatica extract as antioxidant and anti-acetylcholinesterase agent. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Gul, Muhammad Tayyab and Muhammad, Norhayati and Pauzi, Aslia Natasha and Abu Bakar, Mohd Fadzelly and A. Talip, Balkis and Abdullah, Norazlin and Abdul Rahim, Nur Fazira and Syukriah, Wan Nur Ain and Marzuki, Wan and B. Din, Laily and Ibrahime, Nazlina (2021) Evaluation of Phyllanthus niruri L. from Malaysia for In-vitro Anti-Urolithiatic properties by different solvent extraction. Pakistan Journal of Scientific and Industrial Research Series B: Biological Sciences, 64 (B (1)). pp. 81-86.

H

Hairom, Nur Hanis Hayati and Mohammad, Abdul Wahab and Hassan Kadhum, Abdul Amir (2014) Effect of various zinc oxide nanoparticles in membrane photocatalytic reactor for Congo red dye treatment. Separation and Purification Technology, 137. pp. 74-81. ISSN 1383-5866

Haron, Nazrul Syaif (2019) Drying kinetics of pepper in swirling fluidized bed dryer. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Harun, Zawati and Tze, Ching Ong and Matsuura, Takeshi and Hubadillah, Siti Khadijah and Dzarfan Othman, Mohd Hafiz and Ismail, Ahmad Fauzi (2018) Modelling of transport mechanisms and drying shrinkage for multilayer ceramic membrane structure. Chemical Engineering Research and Design, 133. pp. 111-125. ISSN 0263-8762

Hubadillah, Siti Khadijah and Othman, Mohd Hafiz Dzarfan and Matsuuraa, Takeshi and Ismail, A.F. and A. Rahman, Mukhlis and Harun, Zawati and Jaafar, Juhana and Nomur, Mikihiro (2018) Fabrications and applications of low cost ceramic membrane from kaolin: a comprehensive review. Ceramics International, 44. pp. 4538-4560. ISSN 0272-8842

Hubadillah, Siti Khadijah and Othman, Mohd Hafiz Dzarfan and Sheikh Abdul Kadir, Siti Hamimah and Jamalludin, Mohd Riduan and Harun, Zawati and Abd Aziz, Mohd Haiqal and A. Rahman, Mukhlis and Jaafar, Juhana and Mikihiro, Nomura and Sawao, Honda and Iwamoto, Yuji and Fansuri, Hamzah (2019) Removal of As(III) and As(V) from water using green, silica-based ceramic hollow fibre membranes via direct contact membrane distillation. RSC Advances, 9 (6). pp. 3367-3376. ISSN 2046-2069

Hubadillah, Siti Khadijah and Zhong, Sheng Tai and Othman, Mohd Hafiz Dzarfan and Harun, Zawati and Jamalludin, Mohd Riduan and A. Rahman, Mukhlis and Jaafar, Juhana and Ismail, Ahmad Fauzi (2019) Hydrophobic ceramic membrane for membrane distillation: A mini review on preparation, characterization, and applications. Separation and Purification Technology, 217. pp. 71-84. ISSN 1383-5866

J

Jamalludin, Mohd Riduan and Hubadillah, Siti Khadijah and Harun, Zawati and Othman, Mohd Hafiz Dzarfan and Yunos, Muhamad Zaini (2019) Novel superhydrophobic and superoleophilic sugarcane green ceramic hollow fibre membrane as hybrid oil sorbent-separator of real oil and water mixture. Materials Letters, 240. pp. 136-139. ISSN 0167-577X

L

Le, Quyen-Huyen and Kuan, Hsu-Chiang and Dai, Jia-Bin and Zaman, Izzuddin and Lee, Luong and Jun, Ma (2010) Structure-property relations of 55nm particle-toughened epoxy. Polymer, 51 (NIL). pp. 4867-4879. ISSN 0032-3863

Lee, T.C. and Koshy, P. and Abdullah, H.Z. and Idris, M.I. (2017) Biomimetic bone-like apatite coating on anodised titanium in simulated body fluid under UV irradiation. Materials Science Forum, 888. pp. 251-255. ISSN 1662-9752

M

Mansur, Sity Aishah and Mieczkowska, Aleksandra and Flatt, Peter R. and Chappard, Daniel and Irwin, Nigel and Mabilleau, Guillaume (2018) Sitagliptin alters bone composition in high-fat-fed mice. Calcified Tissue International volume, 104. pp. 437-448. ISSN 1432-0827

Mat Jais, Fatin Nadiah and Roslan, Mohd Nazrul and Nasir, Siti Hana and Baharuddin, Norhazaedawati and Uyup, Mohd Khairun Anwar (2020) Tensile properties of untreated bambusa vulgaris, gigantoch- loa levis gigantochloa scortechinii, gigantochloa wrayi, and schizostachyum zollingeri bamboo fibers. International Journal of Advanced Trends in Computer Science and Engineering, 9 (1). pp. 314-319. ISSN 2278-3091

Mior Shahidina, Shazatul Akmaliah and Fadila, Nor Akmal and Yusopa, Mohd Zamri and Tamina, Mohd Nasir and Osman, Saliza Azlina (2017) Effect of etching as pre-treatment for electroless copper plating on silicon wafer. Jurnal Teknologi (Sciences & Engineering), 79 (7). pp. 61-69. ISSN 0127-9696

Mohamad Jamil, Ahmad Syakir (2017) Study of kitchen hood water mist system for cooking emission (UL1046) filtration with low pressure delected nozzle. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamed, Radin and Abdulrahman, Adeleke and Sainudin, Muhammad Shabery bin and Bakar, Siti Asmah and Mohd Kassim, Amir Hashim and Al-Gheethi, Adel (2018) Optimization of ceramic waste filter for bathroom greywater treatment using central composite design (CCD). Journal of Environmental Chemical Engineering, 6 (2). pp. 1578-1588. ISSN 2213-3437

Mohamed Anuar, Rabiatul Adawiyah and Hamidin, Mohamad Shahrom and Osman, Saliza Azlina and Othman, Mohamad Hilmi (2020) Intermetallic compound layer growth at the Interface between Sn-Ag and ENImAg surface finish. International Journal of Emerging Trends in Engineering Research, 8 (1). pp. 52-59. ISSN 2347-3983

Mohd Said, Nor Damsyik and Sahdan, Mohd Zainizan and Nayan, Nafarizal and Saim, Hashim and Adriyanto, Feri and Bakri, Anis Suhaili and Morsin, Marlia (2018) Difference in structural and chemical properties of sol-gel spn coated Al doped TiO2, Y doped TiO2 and Gd doped TiO2 based on trivalent dopants. RSC Advances, 8 (52). pp. 29686-29697. ISSN 2046-2069

Mokeramin, Muslihah and Roslan, Mohd Nazrul and Abdul Rashid, Azrin Hani and Nasir, Siti Hana and Abdul Halip, Juliana (2020) Chemical effect on the mechanical properties of bamboo fiber for textile: a review. International Journal of Advanced Trends in Computer Science and Engineering, 9 (1). pp. 353-359. ISSN 2278-3092

Muhamad, Mimi Suliza and Hamidon, Nuramidah and Salim, Mohd Razman and Yusop, Zulkifli and Lau, Woei Jye and Hadibarata, Tony Response surface methodology for modeling bisphenol A removal using ultrafiltration membrane system. Water Air Soil Pollution, 7 (1). pp. 1-11. ISSN 1573-2932

Musa, S. and Abu Mansor, N.A. A. and Bujang, S. S. and Mohd Kamil, N. A. F. and Adnan, M. S. and Hamdan, R. (2017) Potential study of water extraction from selected plants. MATEC Web of Conferences, 103 (04023). pp. 1-7. ISSN 2261-236X

Mustafa, Mohd Kamarulzaki and Majeed, Uzair and Iqbal, Younas (2018) Effect on silicon nitride thin films properties at various powers of RF magnetron sputtering. International Journal of Engineering and Technology, 7 (4.3). pp. 39-41. ISSN 2227-524X

N

Nikmat Leong, Siti Asma’ and Mohd Samin, Pakharuddin and Idris, Ani and Azizul, Muhamad Asri and Misran, Effaliza (2013) Effect of PAO-based γ-Fe2O3 and surfactant concentration on viscosity characteristic. Applied Mechanics and Materials, 284. pp. 265-270. ISSN 1660-9336

Norfauzi, T. and Hadzley, A. B. and Azlan, U. A. A. and Azhar, A. A. and Noorazizi, S. (2021) Effect of pressure on density, porosity and flexural strength during cold isostatic press of alumina-ysz chromia cutting too. In: IRTTEC 2020, 30 September 2020, Kuala Lumpur, Malaysia (VIRTUAL CONFERENCE).

O

Ojo Samuel, Ojo Samuel and Othman, Mohd Hafiz Dzarfan and Kamaludin, Roziana and Dzinun, Hazlini and Imtiaz, Aniqa and Tao Li, Tao Li and Tijjani El-badawy, Tijjani El-badawy and Asmat Ullah Khan, Asmat Ullah Khan and Puteh, Mohd Hafiz and Erna Yuliwati, Erna Yuliwati and Tonni Agustiono Kurniawan, Tonni Agustiono Kurniawan (2023) Photocatalytic degradation of recalcitrant aromatic hydrocarbon compounds in oilfield-produced water: A critical review. Journal of Cleaner Production, 415. pp. 1-20.

Omar, J.M. and Nor, M.Z.M. and Basri, M.S.M. and Che Pa, N.F. (2020) Clarification of guava juice by an ultrafiltration process: analysis on the operating pressure, membrane fouling and juice qualities. Food Research, 4 (Suppl.). pp. 85-92. ISSN 25502166

Omar, Mohamad Azizan (2019) Leachate treatment by using composite coagulant made from polyaluminium chloride (PAC) and tapioca starch (TS). Masters thesis, Universiti Tun Hussein Onn Malaysia.

R

Rajah, Sathis and Nasir, Nurul Fitriah (2021) Effects of inlet velocity of a bubble column reactor on the fluid flow pattern for biodiesel production. Penerbit UTHM, UTHM.

Razali, Yasmin Syafikah and Tajarudin, Husnul Azan and Daud, Zawawi (2018) Extraction of volatile fatty acids from leachate via liquid- liquid extraction and adsorption method. International Journal of Integrated Engineering, 10 (9). pp. 79-84. ISSN 2229-838X

Rosman, Nurafiqah (2015) Study on the effect of zeolite rice husk particles on polysulfone membrane. Masters thesis, Universiti Tun Hussein Onn Malaysia.

S

Sani Garba., Durumin Iya and Noh, Mohamad Zaky and Ab Razak, Siti Noraiza and Alwi Kutty, Nur Azureen (2018) Physico-mechanical properties of porcelain by substitution of quartz with POFA Treated with 2M Hcl acid. International Journal of Engineering & Technology, 7 (4.3). pp. 141-144. ISSN 2227-524X

Sies, M. Farid and Asmuin, Norzelawati and ., Fakhrulrazi and Norsalim, N.A. and Zakaria, Hanis and Pairan, Rasidi and Sadikin, Azmahani (2017) Determine physical properties of an organic citric acid (processed lime juice) dissolve with water using experimental apparatus. International Journal of Engineering and Technology (IJET), 8 (6). pp. 2530-2536. ISSN 2319-8613

Sulaiman, Syazwan Liyana (2016) Preparation and characterisation of poly (vinyl alcohol)/chitosan/silicon dioxide (PVA/CS/SiO2) beads for the chromium (VI) (Cr(VI) removal. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sundra, Sargunan (2018) Development of a micromixing system for treatment of ORL 48 microtissues in different concentrations of cytochalasin B. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sundra, Sargunan (2018) Development of a micromixing system for treatment of ORL 48 microtissues in different concentrations of cytochalasin B. Masters thesis, Universiti Tun Hussein Onn Malaysia.

W

Wahab, Norhaliza and Abu Talib, Mohd Khaidir and Abd Malik, Ahmad Khairul and Madun, Aziman (2023) Effect of cement stabilized peat on strength, microstructure, and chemical analysis. Physics and Chemistry of the Earth, 129. pp. 1-7. ISSN 103348

Wahab, Norhaliza and Abu Talib, Mohd Khaidir and Abd Malika, Ahmad Khairul and Maduna, Aziman (2023) Effect of cement stabilized peat on strength, microstructure, and chemical analysis. Physics and Chemistry of the Earth, 35. pp. 1-8. ISSN 103348

Y

Yuzaile, Yushazlina R. and Awang, Noor Azura and Zakaria, Zahariah and Zalkepali, Noor U.H.H and Latif, Amirah A. and Azmi, Atiqah N. and Abdul Hadi, Fatin Shaqira (2018) Graphite saturable absorber for Q switched fiber laser. International Journal of Engineering & Technology, 7 (4.3). pp. 334-337. ISSN 0222-7524

Z

Zaimuddin, Izzatun Nazurah and Kandasamy, Ramasamy and Aman, Fazlina (2020) Heat Source/Sink on MHD Flow of Dusty Nano fluid over a Stretching Surface with Volume Fraction of Dust Particle. Jour of adv research in dynamical & control systems, 12 (2). pp. 664-672. ISSN 1943-023X

Zainol Abidin, Nurul Alyani and Kormin, Faridah and Mat Salleh, Nurul Shafira and Mohamed Anuar, Nor Aini Fatihah (2018) Development and acceptance of polyherbal formulation for memory enhancement. Journal of Engineering and Applied Sciences, 13 (3). 3177 -3182. ISSN 1816-949X

Zainuddin, Najahulfazliah and Sufahani, Suliadi Firdaus and Karimipour, A. and Ali, Mahazani and Roslan, Rozaini (2018) Hydromagnetic mixed convection flow in an inclined cavity. JP Journal of Heat and Mass Transfer, 15 (3). pp. 543-568. ISSN 0973-5763

Zainuri, Nur Zarifah (2020) Photocatalytic degradation of palm oil mill secondary effluent (POMSE) using zinc oxide nanoparticles. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zainuri, Nur Zarifah and Hairom, Nur Hanis Hayati and Abu Bakar Sidik, Dilaelyana and Desa, Amira Liyana and Misdan, Nurasyikin and Yusof, Norhaniza and Mohammad, Abdul Wahab (2018) Palm oil mill secondary effluent (POMSE) treatment via photocatalysis process in presence of ZnO-PEG nanoparticles. Journal of Water Process Engineering, 26. pp. 10-16. ISSN 2214-7144

Zainuri, Nur Zarifah and Hairom, Nur Hanis Hayati and Abu Bakar Sidik, Dilaelyana and Desa, Amira Liyana and Misdan, Nurasyikin and Yusof, Norhaniza and Mohammad, Abdul Wahab (2018) Palm oil mill secondary effluent (POMSE) treatment via photocatalysis process in presence of ZnO-PEG nanoparticles. Journal of Water Process Engineering, 26. pp. 10-16. ISSN 2214-7144

Zakaria, Jamal Hazri (2016) Sponge media drying using a swirling fluidized bed dryer. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zalkepali, Noor U.H.H. and Awang, Noor Azura and Yuzaile, Yushazlina R. and LATIF, Amirah A. and Ahmad, Fauzan and Azmi, A N and Abdul Hadi, Fatin Shaqira and Zakaria, Zahariah (2018) Passively Q-Switched pulse erbium doped fiber laser using Antimony (III) Telluride (Sb2Te3) thin film as saturable absorber. INTERNATIONAL JOURNAL OF ENGINEERING AND TECHNOLOGY, 7 (4.30). pp. 313-316. ISSN 0222-7524

Zaman, Izzuddin and Manshoor, Bukhari and Khalid, Amir and Araby, Sherif (2014) From clay to graphene for polymer nanocomposites-a survey. Journal of Polymer Research, 21 (NIL). pp. 1-11. ISSN 1022-9760

Zulkifli, Nor Ashikin and Hasbullah, Nurul Eddahanie and Ameruddin, Amira Saryati and Awang, Noor Azura and Ahmad, Mohd. Khairul (2020) Investigation of the pH effect in hydrothermal growth of zinc oxide nanostructures. Journal of advance research in dynamical & control systems, 12 (2). pp. 804-808.