Items where Subject is "T Technology > TP Chemical technology > TP1080-1185 Polymers and polymer manufacture"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type
Jump to: A | B | E | H | I | J | K | L | M | N | O | P | R | S | T | W | Y | Z
Number of items at this level: 72.

A

Abang Zaidel, Dayang Norulfairuz and Md Rashid, Jamaeyah and Hamidon, Nurul Hazirah and Md. Salleh, Liza and Mohd Kassim, Angzzas Sari (2017) Extraction and characterisation of pectin from dragon fruit (hylocereus polyrhizus) peels. Chemical engineering Transactions, 56. pp. 805-810. ISSN 2283-9216

Abdul Samad, Abdul Aziz and Ali, Noorwirdawati and Mohamad, Noridah and Jayaprakash, J. and Kong, Fah Tee and Mendis, Priyan (2017) Shear strengthening and shear repair of 2-span continuous RC beams with CFRP strips. Journal of Composites for Construction, 21 (3). ISSN 1090-0268

Abdullah, Nur Munirah (2019) Synthesis and characterization of ultra violet curable renewable polymer graphite composites. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Abdullah, Nur Munirah and Mohd Rus, Anika Zafiah and Abdullah, Mohammad Faiz Liew (2018) Enhancement of graphite functionality in renewable polymer composite properties. International Journal of Engineering & Technology, 7 (3.14). pp. 215-220. ISSN 2227-524X

Abdullahi, Tijjani and Ahmad, Norhayati and Wahit, Mat Uzir and Harun, Zawati (2018) Adhesive bonding of thermoplastic polyurethane with metallic wire. Advanced Science Letters, 24 (6). pp. 4045-4049. ISSN 1936-6612

Abu Hassan, Omar and Hamdani, Hazwani and Hashim, Hairulazwan and Ma’ Radzi, Ahmad Al’abqari and Ahmad, Muhammad Shukri and Tengku Ibrahim, Tengku Nadzlin and Zulkifli, Shamsul Aizam (2020) IoT based dual axis solar tracker implementation for polycrystalline photovoltaic with energy storage. Advances in Computing and Intelligent System, 2 (2). pp. 1-8. ISSN 2682-7425

Ahmad, Azlinnorazi and Yunos, Muhamad Zaini and Harun, Zawati and Hassan, Mohd Fahrul and Adzila, Sharifah and Tajul Arifin, Ahmad Mubarak and Abdol Rahman, Mohd Nasrull and Abdul Haq, Reazul Haq and Baharulrazi, Norfhairna (2017) Performance of polysulfone/PANI membrane for humic acid separation. Chemical Engineering Transactions, 56. pp. 703-708. ISSN 2283-9216

Ahmed Bala, Abduladim Salem (2017) Characterization and processing of composite PP/UHMWPE filament for fused deposition modelling application. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Alias, Siti Salwa and Harun, Zawati and Abd Latif, Intan Suyana (2018) Characterization and performance of porous photocatalytic ceramic membranes coated with TiO2 via different dip-coating routes. Journal of Materials Science, 53. pp. 11534-11552. ISSN 0022-2461

Alzomor, A. and M. Rus, A. Z. and A. Wahab, H. and M. Salim, N. S. and Marsi, N. and Zulhakimie, M. A. and M. Farid, M. (2021) Dynamic mechanical analysis and morphology of petroleum-based and bio-epoxy foams with wood filler. In: Proceedings of Green Design and Manufacture 2020, (23–24 July 2020, Arau, Malaysia.

Azmi, Mohd Azham (2012) Fabrication and characterisation of sandwich composites of glass fiber skin and polyurethane foamreinforced coconut coir fiber core. Masters thesis, Universiti Tun Hussein Malaysia.

B

Basri, Hatijah (2012) Development of hybrid antibacterial membrane by incorporating silver particle with 2,4,6-triaminopyrimidine as compatibilizer. Doctoral thesis, Universiti Teknologi Malaysia.

E

Elewe, Adel Muhsin (2014) Feasibility study on producing functional parts using molding technology. Masters thesis, Universiti Tun Hussein Onn Malaysia.

H

Hamdan, Nur Izzah and Zainulabidin, Muhd Hafeez and Kasron, Md Zainorin and Ismail, Al Emran and Kassim, Angzzas Sari (2018) Effect of perforation size on sound absorption characteristics of membrane absorber. International Journal of Integrated Engineering, 10 (4). pp. 27-34. ISSN 2229-838X

Hamza, Sabah Salim (2021) Crashworthiness capability of jute and glass fibre reinforced epoxy tubes under quasi-static loading condition for automotive application. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Hussin, Azmee (2019) Investigation of mould design and process parameter optimisation of plastic injection moulding for thin wall part. Masters thesis, Universiti Tun Hussein Onn Malaysia.

I

Ibrahim, Mohd Halim Irwan (2012) Kebolehacuanan suntikan logam mikro SS 316L menggunakan bahan pengikat PEG dan PMMA Mohd. Doctoral thesis, Universiti Kebangsaan Malaysia.

Idris, M.I. and ADZHARI, M.F. and ABD. BAKIL, S.N. and Lee, T.C. and SELIMIN, M.A. and Abdullah, H.Z. (2020) Surface properties of alginate/chitosan biofilm for wound healing application. In: International Conference on Advanced Materials Characterization Techniques (AMCT 2019), 23rd to 24th July 2019, Putra Regency Hotel, Kangar, Perlis, Malaysia.

Ismail, Al Emran and Che Abdul Aziz, M.A. (2015) Tensile strength of woven yarn kenaf fiber reinforced polyester composites. Journal of Mechanical Engineering and Sciences (JMES), 9. pp. 1695-1704. ISSN 2289-4659

Ismail, Nur Amalina and Abu Bakar, Mohd Fadzelly and Kormin, Faridah and Alona C., Linatoc and Mohamed, Maryati (2018) Application of statistically simplex-centroid mixture design to optimize the TPC and TFC on the proportion of polyherbal formulation used by jakun women. Journal of Engineering and Applied Sciences, 13 (9). 6996 -7002. ISSN 1816-949X

J

Jamaludin, M. I. and Mohamad Nor, N. H. and A. Kasim, N. A. and Saedon, J. B. and Muhamad, N. (2014) Parameter optimization of debinding injection moulded Ti-6Al-4V mix with palm stearin and polyethylene. In: Applied Mechanics and Materials.

Jun, Ma and Meng, Qingshi and Zaman, Izzuddin and Zhu, Shenmin and Michelmore, Andrew and Nobuyuki, Kawashima and Wang, Chun H. and Kuan, Hsu-Chiang (2014) Development of polymer composites using modified, high-structural integrity graphene platelets. Composites Science and Technology, 91 (NIL). pp. 82-90. ISSN 0266-3538

K

Khamis, S Z and Othman, M H and Hasan, S and Main, N M and Masrol, S R and Shaari, M F and Ibrahim, S N and Salim, S (2019) Multiple responses optimisation in injection moulding parameter for polypropylene-nanoclay-gigantochloa scortechinii via taguchi method. Journal of Physics: Conference Series, 1150. pp. 1-7. ISSN 1742-6588

Kian, Meng Tan and Mohd Fauzi, Noor Akhmazillah and Mohd Kassim, Angzzas Sari and A. Razak, Aliff Hisyam and Kamarudin, Kamarul Rahim (2015) Isolation and identification of polystyrene degrading bacteria from zophobas morio’s gut. Walailak Journal Science & Technology, 18 (8). pp. 1-11.

Kunchimon, Siti Zaharah and Tausif, Muhammad and Goswami, Parikshit and Cheung, Vien (2020) From hybrid fibers to microfibers: the characteristics of polyamide 6/polypropylene blend via one-step twin-screw melt extrusion. Polymer Engineering and Science, 60 (4). pp. 690-699. ISSN 0032-3888

L

Low, Pek Jin and Esa, Fahmiruddin and You, Kok Yeow and Abbas, Zulkifly (2017) Estimation of dielectric constant for various standard materials using microstrip ring resonator. Journal of Science and Technology, 9 (3). pp. 55-59. ISSN 2229-8460

M

M. Azahar, N. and A. Hassan, N. and P. Jaya, R. and Hainin, M.R. and M. Yusoff, N.I. and M. Kamaruddin, N.H. and M. Yunus, N.Z. and A. Hassan, S. and Yaacob, H. (2019) Properties of cup lump rubber modified asphalt binder. Road Materials and Pavement Design, 22 (6). pp. 1329-1349. ISSN 1468-0629

M. F. F., Mohamad and Mohamad, Mahmod Abd Hakim and W. A. W., Mat and Ahmad Zaidi, Ahmad Mujahid and K., Noraniah and Mat Zin, Ahmad Faiz and Mustapa, Mohammad Sukri and Rajo Mantari, Muhammad Hanafi Asril (2018) Impact resistance study on rigid polyurethane foam. International Journal of Engineering & Technology, 7 (NIL). pp. 406-409. ISSN 2227-524X

M. Letchumanan, Shaktivell (2021) Simulation of lamination orientation for carbon fiber reinforced polymer as a wrapping structure on piping system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

M. Rus, A .Z. and M. Salim, N. S. (2021) Dynamic mechanical analysis of Dwimatrix Biopolymer from waste oil blended with thermoplastic; LDPE/HDPE. In: Proceedings of Green Design and Manufacture 2020, 23–24 July 2020, Arau, Malaysia.

Mamman, S. and Suah, F. B. M. and Raaov, M. and Mehamod, F. S. and Asman, S. and M. Zain, N. N. (2021) Removal of bisphenol A from aqueous media using a highly selective adsorbent of hybridization cyclodextrin with magnetic molecularly imprinted polymer. Royal Society Open Science. pp. 1-21.

Marsi, N. and M Rus, A Z The effects of biopolymers composite based waste cooking oil and titanium dioxide fillers as superhydrophobic coatings. International Research and Innovation Summit. ISSN 1757-8981

Mat Hassan, Nik Normunira (2016) Characteristic of renewable polymer incorporated with stabilizer to characterize the endurance to ultra voilet irradiation exposure. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mat Husin, Muhammad Muslimin (2017) The characterization of mechanical behaviour on kenaf fibre / polypropylene composites. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Miandal, Kellie and Hoh, Hang Tak and Mohamad, Khairul Anuar and Fuei, Pien Chee and Alias, Afishah (2017) The structural and optical properties of Poly(Triarylamine) (PTAA) thin films prepared at defferent spin coating method. Journal of Computational and Theoretical Nanoscience, 23 (2). pp. 1337-1339. ISSN 1546-1955

Mohammad, Noor Shuhada (2018) Flexural performance of textile fine grained mortar containing risk husk ash as a partial cement replacement in reinforced concrete beams. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohammad Abdalhadi, Daw and Abbas, Zulkifly and Ahmad, Ahmad Fahad and Matori, Khamirul Amin and Esa, Fahmiruddin (2018) Controlling the properties of OPEFBPLA polymer composite by using fe2o3 for microwave applications. Fibers and Polymers, 19. pp. 1513-1521. ISSN 1229-9197

Mohd Ali, Ahmad Zurisman and Sanjayan, Jay and Guerrieri, Maurice (2017) Performance of geopolymer high strength concrete wall panels and cylinders when exposed to a hydrocarbon fire. Construction and Building Materials, 137 (NIL). pp. 195-207. ISSN 0950-0618

Mohd Rus, Anika Zafiah (2006) Thermal and photochemical degradation of polyurethanes based on renewable materials. Doctoral thesis, University of Warwick.

Mohd Salim, Nurul Syamimi (2017) Characterization of thermoset biopolymer in thermoplastic of low and high density polyethylene upon uv irradiation. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Muniandy, Nagentrau (2017) Formulating the plastic deformation expression on coated substrate as a coating selection tool. Masters thesis, Universiti Tun Hussein Onn Malaysia.

N

Ng, Celine and Hamzah, Mohd Syahir Anwar and Abd Razak, Saiful Izwan and Abdul Sukor, Jumadi and Nayan, Nafarizal and Mat Nayan, Nadirul Hasraf (2020) Study on morphological properties of polyvinyl alcohol/poly(lactic acid) wound dressing membrane as drug delivery carrier in wound healing treatment. Journal of Advanced Industrial Technology and Application, 1 (2). pp. 7-11. ISSN 2716-7097

Norazlimi, Nor Atiqah and Ramli, Rosli (2015) The relationships between morphological characteristics and foraging behavior in four selected species of shorebirds and water birds utilizing tropical mudflats. The Scientific World Journal, 7 (1). pp. 1-7. ISSN 1537-744X

Nurhaziqah, A.M.S. and Ahmad, M.K. and Faridah, A.B. and Saputri, D.G. and Ramli, S.A. and Mamat, M.H. and Shimomura, M. (2023) Optimization of polymer blend electrolytes with tuneable conductivity potentials. Materials Letters, 334. pp. 1-4.

O

Othman, M.H. and Ibrahim, M.H.I. and Amin, A.M. and Y,Hashim, M. and Ng, C.H. and Osman, S.A. and Marwah, O.M.F. and Shaari, M.F. and Rafai, N.H. and Johar, M.A. (2018) The optimisation of processing conditions and the effect of nanoclay towards snap fit samples. International Journal of Pure and Applied Mathematics, 118 (24). pp. 1-10. ISSN 1314-3395

Othman, M.H. and Ibrahim, M.H.I. and Amin, S.Y.M. and Abdullah, M.S. (2018) Preparation of injection moulding processing for high density polyethylene via moldflow advisor 2015 simulation. Advanced Science Letters, 24 (3). pp. 1817-1822. ISSN 1936-6612

Othman, M.H. and Osman, S.A. and Amin, S.Y.M. and Rosli, M.S. (2018) Modelling of integral hinges via CadMould 3d-F injection moulding simulation. JOURNAL OF ADVANCED RESEARCH IN DYNAMICAL AND CONTROL SYSTEMS, 10 (13). pp. 112-117. ISSN 1943-023X

Othman, Mohd Hilmi (2008) Injection moulding and thermal properties of polypropylene hinges. Masters thesis, Loughborough University.

Othman, Mohd Hilmi (2015) The modelling of processing conditions for polypropylene-nanoclay integral hinges at high heat exposure. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Othman, Mohd Hilmi and Muhammad, Arif Izzudin and Hassan, Sulaiman (2018) Investigation of clothes recycling as colouring agent for polypropylene-nanoclay nanocomposites. International Journal of Technology and Engineering Studies, 4 (1). pp. 1-6. ISSN 2415-0924

P

Prathabrao, M and Ibrahim, M H I and M Amin, Sri Yulis and Othman, M H (2018) Parameter optimization of metal injection moulding: a review. Journal of Mechanical Engineering, SI 5 (6). pp. 100-114. ISSN 1823- 5514

Prathabrao, M. and Amin, S.Y.M. and Othman, M.H. and Shahbudin, S.N.A. (2019) Optimization of injection molding parameters for WC-TaC-6Co. International Journal of Engineering and Technology, 8 (1.1). pp. 1-5. ISSN 2227-524X

R

Rahim, E. A. and Mohid, Z. and Mat, K. C. and Jamil, M. F. M. and Koyasu, R. and Sasahara, H. (2012) Experimental study of helical milling on CFRP (carbon fibre reinforced polymer) for the hole making process. Advanced Materials Research, 576. pp. 68-71. ISSN 1022-6680

Raveverma, P. and Ibrahim, M. and Sa'ude, N. and Yarwindran, M. (2018) Mechanical behaviour and compatibility analysis of thermoplastic polyurethane polycaprolactone-based new fused deposition modelling filament composite. Journal of Mechanical Engineering, 5 (2). pp. 116-128. ISSN 1823- 5514

S

S., Muhammad Farid and Z., Samad and A.B., Husaini and M.R., Arshad and S., Mahzan (2013) Preliminary analysis on generated jet pressure from ionic polymer composite actuated radial contraction using balloon manometry technique. Indian Journal of Geo-Marine Sciences, 42 (8). pp. 1023-1027. ISSN 0379-5136

S., N. Afiqah and M. Rus, Anika Zafiah and Abdullah, A. N. Aisyah and Syah, A. Shahrizan and M. J., Farhana Hazwanee and M., Noraini and I., S. Aida (2018) Thermal degradation study of waste polymer matrix polypropylene and polyvinyl chloride as polymer matrix filled rice husk decking structure. International Journal of Engineering and Technology, 7 (3.28). pp. 266-270. ISSN 2227-524X

S., N. Afiqah and M. Rus, Anika Zafiah and Syah, A. Shahrizan and M. J., Farhana Hazwanee and M., Noraini and I., S. Aida (2018) Waste polymer blended with copolymer polypropylene to enhance mechanical properties using injection moulding. International Journal of Engineering and Technology, 7 (3.28). pp. 252-257. ISSN 2227-524X

S., N. Afiqah and M. Rus, Anika Zafiah and Z., M. Zulhafiz and Syah, A. Shahrizan and M. J., Farhana Hazwanee and M., Noraini and I., S. Aida (2018) Mechanical properties of wood polymer composites (WPCs) after prolonged ultra-violet (UV) irradiation exposure. International Journal of Engineering and Technology, 7 (3.28). pp. 258-260. ISSN 2227-524X

Shahbudin, S.N.A. and M Amin, Sri Yulis and Othman, M.H. and Ibrahim, M.H.I. (2018) Critical powder loading and the rheology of nanosized cemented carbide with titanium carbide as grain growth inhibitor for injection molding. International Journal of Integrated Engineering, 10 (4). pp. 114-118. ISSN 2229-838X

Sufian, N. A. and M. Rus, A. Z. and Syah, A. Shahrizan and M. J., Farhana Hazwanee and M., Noraini and I., S. Aida (2018) Tensile property of melt mixing co-polypropylene with waste polymer at different composition ratios. International Journal of Engineering and Technology, 7 (3.28). pp. 261-265. ISSN 2227-524X

T

T. Arifin, A. M. and Abdullah, S. and ., Md. Rafiquzzaman and Zulkifli, R. and Wahab, D. A. (2014) Failure characterisation in polymer matrix composite for un-notched and notched (open-hole) specimens under tension condition. Fibers and Polymers, 15 (8). pp. 1729-1738. ISSN 1229-9197

Takai, Zakiyyu Ibrahim and Mustafa, Mohd K. and Asman, S. (2018) Preparation of high performance conductive Polyaniline Magnetite (PANI/Fe3O4) nanocomposites by sol-gel method. Asian Journal of Jurnal Of Chemistry, 30 (12). pp. 2625-2630. ISSN 9707-077X

Tan, Kian Meng and Mohd Fauzi, Noor Akhmazillah and Mohd Kassim, Angzzas Sari and A. Razak, Aliff Hisyam and Kamarudin, Kamarul Rahim (2021) Isolation and identification of polystyrene degrading bacteria from zophobas morio’s gut. Walaikak Journal of Science & Technology, 18 (8).

Taufek, Thoufeili (2019) Evaluation of hydroxyapatite (HA) from waste eggshell strengthened with ultra high molecular weight polyethylene (UHMWPE) by using injection molding process. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Tuah, Siti Nor Aizura (2015) Mechanical and thermal properties of polypropylene/clay roof tiles waste (PP/CRTW) composites. Masters thesis, Universiti Tun Hussein Onn Malaysia.

W

Wahab, Mohd Saidin and Ahmad Raus, Azli Amin and Amir, Irwan and Ahmed, Aqeel and Kamarudin, Khairu (2018) The thermal effect of variate cross-sectional profile on conformal cooling channels in plastic injection moulding. International Journal of Integrated Engineering, 10 (5). 156 -163. ISSN 2229-838X

Y

Yabagi, Jibrin Alhaji and Kimpa, Mohammed Isah and Muhammad, Muhammad Nmayaya and Rashid, Saiful and Embong, Zaidi and Agam, Mohd Arif (2017) The effect of gamma irradiation on chemical, morphology and optical properties of polystyrene nanosphere at various exposure time. IOP Conference Series: Materials Science and Engineering, 298 (1). pp. 1-11. ISSN 1757-899X

Yahaya, Shehu (2018) Development and characterization of treated kaolin filled polypropylene/kaolin nanocomposites. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Yamamoto, T. and Ishimaru, K. and Osman, K. and Kori, M. I. and Khudzari, A. Z. M. and Taib, I. and Yamamoto, T. (2018) Numerical simulation of concentration over-voltage in a polymer electrolyte fuel cell under low-hydrogen conditions. International Journal of Integrated Engineering, 10 (4). pp. 88-94. ISSN 2229-838X

Z

Zakaria, Nazri Huzaimi (2020) Physical and mechanical behaviors of pineapple leaf fibre reinforced thermoplastics corn starch bio polymer composites. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Zaman, Izzuddin and Kuan, Hsu-Chiang and Meng, Qingshi and Michelmore, Andrew and Nobuyuki, Kawashima and Pitt, Terry and Zhang, Liqun and Gouda, Sherif and Lee, Luong and Jun, Ma (2012) A facile approach to chemically modified graphene and its polymer nanocomposites. Advanced Functional Materials, 22 (13). pp. 1-9. ISSN 1616-301X

Zaman - izzuddin@uthm.edu.my, Izzuddin and Kuan, Hsu-Chiang and Dai, Jingfei and Nobuyuki, Kawashima and Michelmore, Andrew and Sovi, Alex and Dong, Songyi and Lee, Luong and Jun, Ma (2012) From carbon nanotubes and silicate layers to graphene platelets for polymer nanocomposites. Nanoscale, 4 (NIL). pp. 4578-4586. ISSN 2040-3364

This list was generated on Thu Dec 5 01:01:48 2024 +08.