Items where Division is "Faculty of Mechanical and Manufacturing Engineering > Department of Mechanical Engineering" and Year is 2012
 | Up a level |
A
Abdullah, Nur Munirah (2012) Characterization and treatment of titanium dioxide, TiO2 via ultrasonic process with melastoma malabathricum as sustainable sensitizer for photovoltaic slar cell. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Agustian, Egi (2012) Production of biodiesel from waste cooking oil using ultrasonic tubular reactor. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Ajer, Mohd Razali (2012) Studies of epoxy powder coated galvanized steel substrate via electrostatic powder coating system. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Azmi, Mohd Azham (2012) Fabrication and characterisation of sandwich composites of glass fiber skin and polyurethane foamreinforced coconut coir fiber core. Masters thesis, Universiti Tun Hussein Malaysia.
C
Chan, Wen Shan (2012) Characteristics of developed flexible polyurethane foams reinforced with coconut coir fibres and recycled tyres. Masters thesis, Universiti Tun Hussein Onn Malaysia.
E
Elfallah, Saleh S Saleh (2012) Analysis of mechanical properties and microstructure of multiple die cavity products produced in vertical and horizontal arrangement by gravity die casting. Masters thesis, Universiti Tun Hussein Malaysia.
F
Firdianto, Ade (2012) Ultrasonic treatment with nickel electroplating combined with oxidation for developing γ-Al2O3 washcoat on Fe-Cr-Al substrate. Masters thesis, Universiti Tun Hussein Onn Malaysia.
I
Ismail, Al Emran and Ahmad Kamal Ariffin, Ahmad Kamal Ariffin and Abdullah, Shahrum and Ghazali, Mariyam Jameelah and Abdulrazzaq, Mohammed and Daud, Ruslizam (2012) Stress intensity factors under combined bending and torsion moments. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 13 (1). pp. 1-8. ISSN 1673-565X
Ismail, Al Emran and Ariffin, A.K. and Abdullah, S. and Ghazali, M.J. (2012) Stress intensity factors for surface cracks in round bar under single and combined loadings. Meccanica, 47 (5). pp. 1141-1156. ISSN 0025-6455
Ismail, Lindawati (2012) Acoustic and durability performances of Arenga Pinnata panel. Masters thesis, Universiti Tun Hussein Onn Malaysia.
J
Jamian, Saifulnizan and Sato, Hisashi and Fujiwara, Eri Miura and Yoshimi, Watanabe (2012) Experimental study on severe plastic deformation of Ti by novel equal-channel angular pressing. Japanese Journal of Applied Physics, 51 (1). pp. 1-7. ISSN 0021-4922
K
Kamarudin, Noor Hasliza (2012) Reinforcement of rice husk in ceramic shell mould system for investment casting process. Masters thesis, Universiti Tun Hussein Malaysia.
Kassim, Noraniah (2012) New technique of producing removable complete denture using rapid tooling approach. Masters thesis, Universiti Tun Hussein Malaysia.
M
M Khalifa, Tarek M. (2012) The flight trajectory analysis on the existing aircraft. Masters thesis, Universiti Tun Hussein Malaysia.
M., Zaleha and S., Mahzan and Maizlinda Izwana, Maizlinda Izwana (2012) A review on the mechanical and physical properties of natural fiber composites. Applied Mechanics and Materials, 229 (231). pp. 276-281. ISSN 1660-9336
McNeil, David A. and Sadikin, Azmahani and Bamardouf, Khalid H. (2012) A mechanistic analysis of shell-side two-phase flow in an idealised in-line tube bundle. International Journal of Multiphase Flow, 45. pp. 53-69. ISSN 0301-9322
Mohamad Bahtiar, Wahieda (2012) Investigation on the mechanical and physical properties of treated and untreated woven sugar-palm fibre reinforced composite. Masters thesis, Universiti Tun Hussein Malaysia.
Mohamed Zarti, Almehdi (2012) Gas turbine performence based creep life estimation using soft computing technique. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Mohd Muhsein Taib, Mohd Muhsein (2012) Experimental investigation on the feasibility and durability of a novel diesel particulate filter. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Mohd Nor, Mohd Fahrurazi (2012) Development of step-compliant system for turn-mill operations. Masters thesis, Universiti Tun Hussein Malaysia.
Mohmd Arifin, Nabila Afif (2012) Finite element simulation of machining AISI 1045 steel using uncoated carbide tool. Masters thesis, Universiti Tun Hussein Malaysia.
Mohmd Arifin, Nabila Afif (2012) Finite element simulation of machining AISI 1045 steel using uncoated carbide tool. Masters thesis, Universiti Tun Hussein Malaysia.
Mustafa, Najwa (2012) Processibility of black garbage bag as a novel binder system in metal injection molding. Masters thesis, Universiti Tun Hussein Malaysia.
P
Pairan, Mohamad Rasidi (2012) A simulation of film cooling in the leading edge region of a turbine blade (trench effect on film effectiveness from cylinder in crossflow). Masters thesis, Universiti Tun Hussein Malaysia.
R
Ramlan, Aslinda (2012) Study on characteristics behavior of developing nozzle for aerosol spray. Masters thesis, Universiti Tun Hussein Onn Malaysia.
S
Saesar, Luhur Budi (2012) Development of semi-autonomous mobile robot hardware-in-the-loop (HIL) simulation for indoor mapping. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Soo, Poey Lam (2012) Analysis of the flow characteristic inside a heated and unheated horizontal rifled tube. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Subhi, Zaid Ali (2012) The effects of vortex gate design on mechanical strength of thin section casting of LM 25 (Al---7Si-0.3Mg) aluminum casting alloy. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Z
Zainuddin, Zarita and Pauline, Ong (2012) An effective and novel wavelet neural network approach in classifying type 2 diabetics. Neural Network World, 22 (5). pp. 407-428. ISSN 1210-0552
Zaman, Izzuddin and Kuan, Hsu-Chiang and Dai, Jingfei and Kawashima, Nobuyuki and Michelmore, Andrew and Sovi, Alex and Dong, Songyi and Luonga, Lee and Ma, Jun (2012) From carbon nanotubes and silicate layers to graphene platelets for polymer nanocomposites. Nanoscale, 4. pp. 4578-4586. ISSN 2040-3364
Zaman, Izzuddin and Kuan, Hsu-Chiang and Meng, Qingshi and Michelmore, Andrew and Kawashima, Nobuyuki and Pitt, Terry and Zhang, Liqun and Gouda, Sherif and Luong, Lee and Ma, Jun (2012) A facile approach to chemically modified graphene and its polymer nanocomposites. Advanced Functional Materials. pp. 1-9. ISSN 1616-301X
Zaman, Izzuddin and Kuan, Hsu-Chiang and Meng, Qingshi and Michelmore, Andrew and Nobuyuki, Kawashima and Pitt, Terry and Zhang, Liqun and Gouda, Sherif and Lee, Luong and Jun, Ma (2012) A facile approach to chemically modified graphene and its polymer nanocomposites. Advanced Functional Materials, 22 (13). pp. 1-9. ISSN 1616-301X
Zaman - izzuddin@uthm.edu.my, Izzuddin and Kuan, Hsu-Chiang and Dai, Jingfei and Nobuyuki, Kawashima and Michelmore, Andrew and Sovi, Alex and Dong, Songyi and Lee, Luong and Jun, Ma (2012) From carbon nanotubes and silicate layers to graphene platelets for polymer nanocomposites. Nanoscale, 4 (NIL). pp. 4578-4586. ISSN 2040-3364
Zamri Tan, Nurul Zakiah (2012) Step-NC code generator for drilling operation using GEN-M. Masters thesis, Universiti Tun Hussein Malaysia.