Items where Subject is "T Technology > TJ Mechanical engineering and machinery > TJ1125-1345 Machine shops and machine shop practice"

Article

Abdul Sani, Amiril Sahab and Abd Rahim, Erween and Sharif, Safian and Sasahara, Hiroyuki (2019) Machining performance of vegetable oil with phosphonium- and ammonium-based ionic liquids via MQL technique. Journal of Cleaner Production, 209. pp. 947-964. ISSN 0959-6526

Abdul Sani, Amiril Sahab and Abd Rahim, Erween and Sharif, Safian and Sasahara, Hiroyuki (2019) The influence of modified vegetable oils on tool failure mode and wear mechanisms when turning AISI 1045. Tribology International, 129. pp. 347-362. ISSN 0301-679X

Abdullah, Haslina and Ramli, Rizauddin and Abd Wahab, Dzuraidah and Abu Qudeiri, Jaber (2016) Minimizing machining airtime motion with an ant colony algorithm. The International Journal of Advanced Manufacturing Technology, 10 (1). pp. 161-165. ISSN 1881-803X

Ahmed, Aqeel and Raus, Azli Amin and Wahab, Md Saidin and Kamarudin, Khairu (2017) Effects of selective laser melting parameters on relative density of AlSi10Mg. International Journal of Engineering and Technology (IJET), 8 (6). pp. 2552-2557. ISSN 2319-8613

Ibrahem Salih, Adnan and Abdelouhahab, Abid and A. Mostafa, Salama and Zaiter, Mohammed Joudah (2015) Updating the NCTUns-6.0 tool to simulate parallel optical burst switching of all-optical ultra-dense WDM systems. Photonic Network Communications, 29 (1). pp. 106-117. ISSN 1387-974X

Ismail, Mohd Erfy and Hashim, Suhaizal and Marian, Mohd Fairuz and Rahim, Mohd Bekri Rahim and Nur Yunus, Faizal Amin and Masran, Saiful Hadi (2018) Amalan keselamatan pelajar dalam bengkel katering. Online Journal for TVET Practitioners (OJ-TP), 3 (1). pp. 1-11. ISSN 2289-7410

Kamdani, K. and Hamsah, A.A. and Rafai, N.H. and Rahim, M.Z. and Wong, C.K. and Chong, Y. L. (2018) Study of cutting force and surface roughness on drilling stainless steel 316L under various coolant condition. Key Engineering Materials, 791. pp. 116-122. ISSN 1662-9795

Lee, Woon Kiow and Tuan Muda, Syed Mohamad Aiman and Ong, Pauline and Sia, Chee Kiong and Talib, Norfazillah and Saleh, Aslinda (2018) Application of wavelet analysis in tool wear evaluation using image processing method. International Journal of Engineering and Technology, 7 (4.36). pp. 426-431. ISSN 2227-524X

Mat Sharif, Zainon and Mohd Taib, Norhasnina and Yusof, Mohd Sallehuddin and Rahim, Mohammad Zulafif and Mohd Tobi, Abdul Latif and Othman, Mohd Syafiq (2017) Designation of soap molder machine and procedure for transparent soap. "IOP Conference Series: Materials Science and Engineering Journal ", 203 (012001). pp. 1-7. ISSN 1757-899X

Ong, Pauline and Chong, Chon Haow and Rahim, Mohammad Zulafif and Lee, Woon Kiow and Sia, Chee Kiong and Ahmad, Muhammad Ariff Haikal (2020) Intelligent approach for processmodelling and optimization on electrical dischargemachining of polycrystalline diamond. Journal of Intelligent Manufacturing, 31. pp. 227-247. ISSN 0956-5515

Samiran, N. A. and Mohamad Rus, M. A. and Mat Hassan, N. N. and Ishak, M. Z. and Ishak, I. A. (2021) Study of tensile properties for aluminum 6061 reinforced with AISI 1060 steel machining chips. The International Journal of Integrated Engineering, 13 (2). pp. 241-246. ISSN 2229-838X

Yuzaile, Yushazlina R. and Awang, Noor Azura and Zakaria, Zahariah and Zalkepali, Noor U.H.H and Latif, Amirah A. and Azmi, Atiqah N. and Abdul Hadi, Fatin Shaqira (2018) Graphite saturable absorber for Q switched fiber laser. International Journal of Engineering & Technology, 7 (4.3). pp. 334-337. ISSN 0222-7524

Book Section

Ismail, Suhairi and Mohammad Noor, Hafsa and Kamaruddin, Syamsul Azrin and Mohammad Sauti, Muhammad Amir Aiman and Abdul Halim, Muhammad Hazim and Ismail, Muhammad Fikri Syazani (2020) Pembersih bilah kipas siling. In: Inovasi Reka Bentuk Mesin Industri. Penerbit UTHM, pp. 19-36. ISBN 978-967-2389-80-4

Ismail, Suhairi and Mohammad Noor, Hafsa and Omar, Amin Shah and Benmahfouz Azhar, Aisyah Azhar and Zainuddin, Nurul Hidayah Natasha and Raman, Nurulnastashah (2020) Alat pengutip buah. In: Inovasi Reka Bentuk Mesin Industri. Penerbit UTHM, pp. 61-78. ISBN 978-967-2389-80-4

Ismail, Suhairi and Yahya, Mohd Shahir and Janon, Mohd Najib and Abdul Mutalib, Mohammad Asyraf Safwan and Rosnizam, Nurshafawati and Abdul Aziz, Nuraini (2020) Troli tong gas. In: Inovasi Reka Bentuk Mesin Industri. Penerbit UTHM, pp. 93-104. ISBN 978-967-2389-80-4

Kassim, Noraniah and Basharie, Siti Mariam and Fauzi, Muhamad Razizy and Abd Rashid, Muhamad Hazim and Mashuri, Muhammad Amirul Adli and Mohd Rizal, Muhammad Faisal (2020) Alat pemungut tandan kelapa sawit darjah kebebasan. In: Inovasi Reka Bentuk Mesin Industri. Penerbit UTHM, pp. 105-114. ISBN 978-967-2389-80-4

Kassim, Noraniah and Janon, Mohd Najib and Mohamad, Mahmod Abd Hakim and Basharie, Siti Mariam and Kadis, Ghazali (2020) Alat pencungkil ubi kayu. In: Inovasi Reka Bentuk Mesin Industri. Penerbit UTHM, pp. 37-46. ISBN 978-967-2389-80-4

Muhamad, Aida and Mohd Noor, Siti Fatimah and Abdul Halim, Norhazimah and Md Samad, Nur Afiqah and Ibrahim, Nurul Fatihah and Abu Bakar, Syahirah Amirah (2020) Tissue paper from banana peels: a preliminary study. In: Application in Science and Technology. Penerbit UTHM, pp. 45-53. ISBN 978-967-2389-55-2

Sulau Padan, Cassandra and Su’ai @ Suani, Nur Ratna and Ruselan, Mohammad Fahmi and Nordin, Muhammad Daud and Raja Mamat, Tengku Nur Azila and Mahmood, Salwa and Mat Hassan, Nik Normunira (2022) Production planning improvement in a t-shirt printing company using Material Requirement Planning (MRP) approach: a case study. In: Multidisciplinary Engineering Science and Advanced Technology. Penerbit UTHM, UTHM, pp. 56-61. ISBN 978-967-2817-40-6

Tuan Ibrahim, Tuan Mohd Hafeez and Ab. Rahman, Rosdi and Ahmad, Muhammad Shukri and Sarif, Muhammad Iqmal and Mohd Zain, Muhamad Nazim and Saniman, Mohamad Shafiq (2020) Mesin pembungkus nasi lemak. In: Inovasi Reka Bentuk Mesin Industri. Penerbit UTHM, pp. 1-18. ISBN 978-967-2389-80-4

Tuan Ibrahim, Tuan Mohd Hafeez and Kadis, Ghazali and Othman, Khairulnizam and Mohamad Shokri, Muhammad Akmal and Khalid, Noor Fasya Fashihah and Nor Halim, Nur Hanani (2020) Mesin penyedut hampagas dwifungsi. In: Inovasi Reka Bentuk Mesin Industri. Penerbit UTHM, pp. 79-92. ISBN 978-967-2389-80-4

Yahya, Mohd Shahir and Mohamad, Mahmod Abd Hakim and Kamaruddin, Syamsul Azrin and Mohd Nadzri, Muhammad Haziq Khairunnas and Razali, Nur Afiq and Mohd Suhaimin, Muhammad Syamil Hakim (2020) Khemah mangsa banjir patuh syariah. In: Inovasi Reka Bentuk Mesin Industri. Penerbit UTHM, pp. 47-60. ISBN 978-967-2389-80-4

Conference or Workshop Item

Mohd Alwi, Abg and M. A., A. and Abdullah, N. H. L. and Lai, C. S. (2021) Designing portable circular cutter tools using inventors for straight cutting iron at welding workshop. In: Research and Innovation in Technical and Vocational Education and Training, UTHM.

Mokhairi, Muhammad Nurfirdaus and Lai, Chee Sern and Lee, Lee Ming Foong and .Ab Halim, Fazlinda (2020) Perbandingan kesedaran pelajar terhadap amalan keselamatan di UTHM Dan KKTM. In: Seminar Kebangsaan Majlis Dekan Pendidikan Universiti Awam Malaysia (MEDC2020), 11-12/11/2020, USIM. (In Press)

Rubani, Siti Nur Kamariah and Kamis, Mohd Nazri and Zakaria, Normah and Hamzah, Norhasyimah and Ariffin, Arihasnida (2021) Development of press machine for metal waste using BLYNK application remote control at general machine workshop. In: Research and Innovation in Technical and Vocational Education and Training, UTHM.

Thesis

Abbas, Abbas Allawi (2014) Optimization of parameters of laser non-linear inclined cutting on stainless steel metal. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abbas, Mohammed Abdulridha (2020) Influence of agglomeration phenomenon in machining of AISI D2 hardened steel using nano chromium powder mixed-EDM. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Abd. Rahim, Erween (2005) Performance evaluation of uncoated and coated carbide tools when drilling titanium alloy. Masters thesis, Universiti Teknologi Malaysia.

Abdul Hamid, Faizul Ezmat (2013) Investigation on different composition of powder metallurgy electrode (Cu-W) in high performance edm (HPEDM) on AISI D2 hardened steel. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Hamid, Intan Sue Liana (2018) Development of three-dimensional (3D) grayscale Photolithography process for microfluidic curvature Structures. Doctoral thesis, Universiti Sains Malaysia.

Abdul Haq, Reazul Haq (2009) Performance evaluation of different types of graphite electrodes on titanium (Ti - 6A1 - 4V). Masters thesis, Universiti Teknologi Malaysia..

Abdul Latif, Abdul Afiff Fiqhry (2017) Experimental study of biomedical stainless steel 316l vibration assisted milling using retrofittable 1D UVAM worktable. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Abdullah, Haslina (2017) Pengoptimuman jarak laluan mata alat menggunakan algoritma koloni semut untuk proses pengisaran poket. Doctoral thesis, Universiti Kebangsaan Malaysia.

Ahmad, Said (2016) Improvement of machinability and surface integrity during electro discharge machining of inconel 718 using nano powder suspension dielectric. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Chi Adam, Mohd Khairil Anbia (2020) Development of open platform controller for step-NC compliant CNC system. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Haris, Nur Ismalina (2013) Failure analysis of conveyor chain links: a case study at Top Glove Sdn. Bhd. Masters thesis, Universiti Tun Hussein Malaysia.

Hashim, Mohd Fadzil Muin (2007) Prediction of punching life span for phosphor bronze stamping operation. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hassan, Noor Haslyena (2011) Study of using three dimensional printer for EDM electrode fabrication. Masters thesis, Universiti Tun Hussein Malaysia.

Idris, Muhammad Ridzuan (2015) Effects of chromium powder mixed in electrical discharge machining of AISI D2 hardened steels. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jamil Hosni, Nor Ain (2020) Effect of chromium (cr) particle size and span-20 surfactant on Aisi d2 hardened steel using electrical discharge machining. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Jasni, Nur Akmal Hakim (2013) Cutting performance of advanced multilayer coated (TiAlN/AlCrN) in machining of AISI D2 hardened steel. Masters thesis, Universiti Tun Hussein Malaysia.

Jusoh, Ahmad Yusni (2002) Persepsi pelajar terhadap panduan keselamatan makmal kejuruteraan awam KUiTTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Kosnan, Noor Mayafaraniza (2003) Kajian terhadap keperluan garis panduan pengendalian makmal automasi : pneumatik,bagi pelajar sarjana muda teknologi kejuruteraan mekanikal, Fakulti Teknologi Kejuruteraan, KUiTTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Latif, Kamran (2015) New technique for the development of open CNC cell controller based on ISO 14649 and ISO 6983. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Md Zain, Mohd Zahiruddin (2005) Influence of electrical parameters and optimization of EDM performance measures on Ti-6A1-4V using DOE/TAGUCHI method. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mior Ismail, Mior Mohd. Suhairin (2003) Kajian persepsi pelajar terhadap amalan keselamatan bengkel kejuruteraan awam (perkayuan). Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mior Ismail, Mior Mohd. Suhairin (2003) Kajian persepsi pelajar terhadap amalan keselamatan bengkel kejuruteraan awam (perkayuan). Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mohamed Yunus, Ahmad Syukri (2003) Pembentukan dan penilaian indikator bengkel elektrik cemerlang: satu kajian di Sekolah Menengah Teknik Johor Bahru. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mohammed Saif, Yazid Abdulsameea (2014) Modelling and simulation of surface roughness obtain from micro milling by using artificial neural network. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Nor, Mohd Fahrurazi (2012) Development of step-compliant system for turn-mill operations. Masters thesis, Universiti Tun Hussein Malaysia.

Mohd Yazit, Tengku Nursyarah Bariah (2003) Pembentukan dan penilaian indikator bengkel kayu kejuruteraan awam cemerlang: satu kajian di Politeknik Sultan Salahuddin Abdul Aziz Shah. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mohd Zukeri, Mohd Zaim (2010) Study on cutting operation in turning process by 3D Simulation using deform 3D. Masters thesis, Universiti Tun Hussein Malaysia.

Mohid, Zazuli (2018) Performance of laser assisted micro-milling (laμmill) of titanium alloy using micro ball end mill. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Po'a, Ayu Wirdawati (2002) Kajian terhadap amalan keselamatan dan kesihatan di Pusat Latihan Teknologi Tinggi (ADTEC) Batu Pahat. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Rubani, Siti Nur Kamariah (2016) Pembangunan dan keberkesanan modul perancahan berstruktur dalam pembelajaran berasaskan projek terhadap pengetahuan dan kemahiran bagi projek mesin larik pelajar Politeknik. Doctoral thesis, Universiti Sains Malaysia.

Saher, Mohd Najib (2015) Amalan pengurusan keselamatan bengkel kemahiran hidup (KHB) Sekolah Menengah Harian Daerah Batu Pahat. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sakury, Khairudin (2017) Olahan air sisa pusat penyembelihan ayam menggunakan elektrod keluli tahan karat dan aluminum melalui proses gabungan elektro-penggumpalan dan pengelompokan dan penggumpalan dengan menggunakan aluminum sulfat dan poli-aluminum klorida. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Shamsudin, Shazarel (2005) Development of the process planning for machining prismatic parts. Masters thesis, Universiti Putra Malaysia.

Tsen, Vui Hin (2018) Design and development of an automated metered dose inhaler (MDI) for asthmatic patient. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Tsen, Vui Hin (2018) Design and development of an automated metered dose inhaler (MDI) for asthmatic patient. Masters thesis, Universiti Tun Hussein Malaysia.

Yusoff, Mohd Faizal (2003) Persepsi Pelajar Diploma Kejuruteraan Awam, KUiTTHO terhadap manual pengendalian dan penyelenggaraan mesin pengetaman kayu. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.