Items where Subject is "T Technology > TD Environmental technology. Sanitary engineering > TD783-812.5 Municipal refuse. Solid wastes"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type
Jump to: A | B | D | E | H | I | J | K | L | M | N | R | S | W
Number of items at this level: 50.

A

Ab Zail, Nurul Fazilah and Adnan, Suraya Hani (2021) Sustainable concrete partially comprised of supplementary cementitious material and alternative fine aggregate- a review. In: Progress in Engineering Application and Technology, 22 Jun 2021, UTHM.

Abas, Muhamad Azahar (2017) Good governance in national solid waste management policy (NSWMP) implementation: A case study in Kuala Lumpur. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Abas, Muhamad Azahar and Wee, Seow Ta (2017) The constraints of good governance practice in National Solid Waste Management Policy (NSWMP) implementation in Malaysia. Advanced Science Letters, 24 (6). pp. 4704-4709. ISSN 978073541573

Abas, Muhamad Azahar and Wee, Seow Ta and Chen, Goh Kai (2018) The practices of good governance in National Solid Waste Management Policy (NSWMP) implementation: a case study of Kuala Lumpur, Malaysia. Advanced Science Letters, 24 (6). pp. 4710-4715. ISSN 1936-6612

Abdul Kadir, Aeslina and Abdul Salim, Nurul Salhana and Abdullah, Mohd Mustafa Al Bakri and Mohd Nawi, Mohd Nasrun and Sandu, Andrei Victor (2018) Properties impact from wastewater treatment sludge utilized into fired clay bricks. Malaysian Construction Research Journal (MCRJ) Special Issue, 2 (2). pp. 130-142. ISSN 1985 - 3807

Abdul Kadir, Aeslina and Yahya, Zarina and Hussin, Kamarudin and Liew, Yun Ming and Abdullah, Mohd Mustafa Al Bakri and Deraman, Laila Mardiah (2015) Utilization of bottom ash for alkali-activated (SI-AL) materials: a review. ARPN Journal of Engineering and Applied Sciences, 10 (18). pp. 8351-8357. ISSN 1819-6608

Abdulmalik, Samir Sani and Ahmad, Rosli and Usman, O Y (2018) Microstructure and tensile properties of friction stir processed Al-Si alloy. Saudi Journal of Engineering and Technology (SJEAT), 3 (9). pp. 593-597. ISSN 2415-6272

Abu Bakar, Amnani (2015) Intergrated leachate treatment by sequencing batch reactor (SBR) and micro-zeolite (MZ). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abu Bakar, Norshila and Othman, Norzila and Yunus, Zalilah Murni and Altowayti, Wahid Ali Hamood and Tahir, Muhammad and Fitriani, Nurina and Mohd Salleh, Siti Nor Aishah (2021) An insight review of lignocellulosic materials as activated carbon precursor for textile wastewater treatment. Environmental Technology & Innovation, 22. pp. 2-27.

Adnan, Mohd Shalahuddin and Nda, Muhammad and Zakaria, Mohd Shazrin and Mohammad Razi, Mohd Adib and Suhadak, Mohamad Arif and Mohd Yusoff, Mohd Azlan and Rahmat, Siti Nazahiyah and Abustan, Muhammad Salleh and Ahmad Tajudin, Saiful Azhar (2018) Bedload sediment concentration of Sungai Kahang downstream Kahang dam in Johor. International Journal of Integrated Engineering, 10 (2). pp. 146-150. ISSN 2229-838X

Ali, R. and Lim, C. L. and Zainun, N. Y. and Sunar, N. M. and Hamidon, N. and Harun, H. and Hamid, N. H. and Muhamad, M. S. (2020) Towards zero-waste campus: perception of the community in UTHM Pagoh campus on solid waste management system. IOP Conference Series: Materials Science and Engineering (MSE). pp. 1-9. ISSN 1757-899X

Ali Noman, Efaq and Algheethi -, Adel Ali Saeed Abduh and Nik Ab. Rahman, Nik Norulaini and Nagao, Hideyuki and Ab Kadir, Mohd Omar (2016) Assessment of relevant fungal species in clinical solid wastes. Environmental Science and Pollution Research, 23 (9). pp. 19806-19824. ISSN 1614-7499

Azhari, Nur Wahidah (2019) The performance of Takakura composting using food waste from Makanan Ringan Mas Industry. Masters thesis, Universiti Tun Hussein Onn Malaysia.

B

Bello, Muhammad Umar and Daud @ Juanil, David Martin and Kasim, Rozilah and Aliyu, Aliyu Ahmad (2018) Community participation as mediating variable for enhancement of citizen satisfaction in Malaysian municipal councils. Batu Pahat municipal council in perspective. Journal of Advanced Research in Dynamical and Control Systems, 10 (6). pp. 56-62. ISSN 1943-023X

Bello, Muhammad Umar and Juanil, Daud and Kasim, Rozilah and Razali, Muhammad Najib and Ngadiman, Yunos and Bon, Talib (2018) Evidence of municipal awareness as a construct for enhancing citizen satisfaction in municipal council of Malaysia. International Electronic Scientific Journal, 4 (2). pp. 1001-1012. ISSN 2413-9009

Bello, Muhammad Umar and Martin, David and Kasim, Rozilah and Ahmad Aliyu, Aliyu (2017) Review of community participation and FM services contributions toward provisioning of quality municipal services in Malaysian local authorities. Advanced Science Letters, 23 (9). pp. 9042-9044. ISSN 1936-6612

Bello, Muhammad Umar and Martin, David and Kasim, Rozilah and Ahmad Aliyu, Aliyu (2017) A review of FM services for enhancing and provisioning of optimal quality municipal services for local government in Malaysia. Advanced Science Letters, 23 (9). pp. 9039-9041. ISSN 1936-6612

D

Daud, Z. and Abubakar, M. Hijab and Abdul Kadir, A. and Abdul Latiff, A. and Awang, H. and Abdul Halim, A. and Marto, A. (2017) Batch study on COD and ammonia nitrogen removal using granular activated carbon and cockle shells. International Journal of Engineering, 30 (7). pp. 937-944. ISSN 1728-144X

E

Er, Xin Yi (2020) Managing landfill leachate using biological approach. Masters thesis, Universiti Tun Hussein Onn Malaysia.

H

Harir, Adamu Isa and Gana, Bukar Abba and Kasim, Rozilah and Salihu, B. H (2017) The factors influencing municipal solid waste generation in bauchi town, Nigeria. Advanced Science Letters, 23 (9). pp. 9081-9084. ISSN 1936-7317

I

Isa Harir, Adamu and Kasim, Rozilah (2017) Integrated waste recycling framework for municipal solid waste generated (MSWG) in Bauchi Metropolis, Nigeria. Journal of Applied Sciences & Environmental Sustainability, 3 (7). pp. 57-67. ISSN 2360-8013

J

Jaharudin, Siti Noraen (2019) The effectiveness of ‘secure and guard’ (SG) method and 14 protocol against illegal dumping of solid waste in Wilayah Persekutuan Kuala Lumpur (WPKL). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jalil, Mas Rahayu (2004) Leachate migration path estimations and groundwater quality analysis near a solid waste dumping site at Kampong Kelichap, Batu Pahat. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jalil, Mas Rahayu (2004) Leachate migration path estimations and groundwater quality analysis near a solid waste dumping site at Kampong Kelichap, Batu Pahat. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Jamaludin, Siti Noratifah (2018) Study of food waste composting by using breadfruit peel as fermentation liquid. Masters thesis, Universiti Tun Hussein Onn Malaysia.

K

Kamaruddin, Sufian and Wan, Inn Goh and Ahmed Jhatial, Ashfaque and Tahir Lakhiar, Muhammad (2018) Chemical and fresh state properties of foamed concrete incorporating palm oil fuel ash and eggshell ash as cement replacement. International Journal of Engineering & Technology, 7 (4.3). pp. 350-354. ISSN 2227-524X

Kasim, Rozilah and Harir, Adamu Isa and Ishiyaku, Bala (2015) Resource potentials of composting the organic wastes stream from municipal solid wastes compositions arising in Nigerian cities. Journal of Geoscience and Environment Protection, 6 (10). pp. 10-15. ISSN 23274344

Kasim, Rozilah and Isa Harir, Adamu and Ishiyaku, Bala (2015) Exploring the resource recovery potentials of municipal solid waste: a review of solid wastes composting in developing countries. International Journal of Scientific and Research Publications, 5 (4). pp. 1-8. ISSN 2250-3153

Kormin, Shaharuddin and M. Rus, Anika Zafiah (2017) Preparation and characterization of biopolyol from liquefied oil palm fruit waste: part 2. Materials Science Forum, 882. pp. 113-118. ISSN 0255-5476

L

Lee, Mao Rui (2013) Treatment of landfill leachate in coagulationflocculation method by using micro zeolite and micro sand. Masters thesis, Universiti Tun Hussein Malaysia.

Lim, Chun Lan (2021) A study on the profile of solid waste and its reduction alternatives at Universiti Tun Hussein Onn Malaysia (UTHM), Pagoh Campus, Muar, Johor. Masters thesis, Universiti Tun Hussein Malaysia.

M

Mahdi, Ahmed Sahib (2017) Effects of reinforcement materials and matrix particle sizes on mechanical properties and wear of recycled aluminum chips. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mat Hassan, Nik Normunira and Shamsudin, Zainon Sharmila and Mohd Rus, Anika Zafiah and Sulong, Nurulsaidatulsyida (2018) Investigation of renewable polymer composite from waste oil endurance to UV irradiation exposure by using FTIR and UV-VIS. Journal of Mechanical Engineering, 5 (5). pp. 53-61. ISSN 1823- 5514

Mohamad Zailani, Laila Wahidah (2019) Keberkesanan elektro-penggumpalan (aluminum dan ferum) bersama penggumpal komposit(poli aluminum klorida dan tepung ubi kayu) bagi merawat larut lesapan. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Fodzi, Muhammad Haikal (2021) Municipal solid waste mixed polymer composites based diapers waste (MSWPC-DW) for partition panel. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Fodzi, Muhammad Haikal and Marsi, Noraini and Chow, Li Kien (2020) Utilization of PEFB reinforced box waste coated super-hydrophobic coating for shoe sole applications. International Journal of Advanced Trends in Computer Science and Engineering, 9 (1.1). pp. 461-465. ISSN 2278-3091

Mohd Fodzi, Muhammad Haikal and Marsi, Noraini and Huzaisham, Nur Athirah and Thana Singam, Rupashinii (2020) Influence of the ratio on the mechanical properties of epoxy resin composite with diapers waste as fillers for partition panel application. Test Engineering & Management, 83 (3-4). pp. 10141-10151. ISSN 0193-4120

Mohd Fodzi, Muhammad Haikal and Marsi, Noraini and Muhd Rus, Anika Zafiah and Awang, Mariah and Huzaisham, Athirah and Thanasingam, Rupashinii (2020) A review on the application of the solid waste for building material. Journal of Computational and Theoretical Nanoscience, 17 (1). pp. 613-619. ISSN 1546-1955

Mohd Fodzi, Muhammad Haikal and Marsi, Noraini and Shariff, Hafizuddin Hakim (2020) Analysis of epoxy composite with diapers waste as fillers: relationship of density, porosity and sound absorption coefficient. International Journal of Advanced Research in Engineering and Technology (IJARET), 11 (4). pp. 137-146. ISSN 0976-6480

Mohd Rusli, Muhammad Hafiz Daniel and Hashim, Hairulazwan (2021) Fertilization of food waste management in UTHM’s cafeteria using arduino. In: Progress in Engineering Application and Technology, 22 Jun 2021, UTHM.

Muhamad Hanafi, Nur Fatihah (2015) Landfill leachate treatment by combination of electro - fenton and sequencing batch reactor method. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Murshid, Noorafizah (2018) Leaching behaviors of heavy metals on petroleum sludge waste treatment by using solidification/stabilization (s/s) method with palm oil fuel ash as partial cement replacement. Masters thesis, Universiti Tun Hussein Onn Malaysia.

N

Nadarason, Kageishieny (2019) Relationship between construction waste generation and recycling practices in Southern Johor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ngah Jidin, Norsafarina (2009) Kesan peningkatan beban organik (OLR) dan perubahan nilai pH ke atas efluen industri minyak sawit (ElMS) menggunakan reaktor UASB. Masters thesis, Universiti Tun Hussein Onn Malaysia.

R

Radin Mohamed, Radin Maya Saphira and Abduh Algheethi, Adel Ali Saeed and M.A., Yaakob (2017) Recycling of solid wastes at kindergartens centres running title; recycling of solid wastes. Songklanakarin Journal of Science and Technology, 39 (1). pp. 69-75. ISSN 2408-1779

Rakiman, Umol Syamsyul (2018) Developing value creation framework for Malaysia’s aluminium recycling industry from construction perspective. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

S

Shariat, Norehan and Sanusi, Shahmir Hayyan (2020) The potential of coconut waste element as an alternative material for roof ceiling purpose. Advanced Research in Natural Fibers, 2 (2). pp. 23-26.

Sheikh Khalid, Faisal and Juki, Mohd Irwan and Wan Ibrahim, Mohd Haziman and Othman, Norzila and Shahidan, Shahiron (2018) Performance of plastic wastes in fiber-reinforced concrete beams. Construction and Building Materials, 183. pp. 451-464. ISSN 0950-0618

W

Wahab, Eta and Shamsuddin, Alina and Abdullah, Nor Hazana (2018) A study on environmental waste management practices: a technology foresight perspective. Advanced Science Letters, 24 (4). pp. 2713-2716. ISSN 1936-6612

Wahab, Mohd Daniel and Mohamad, Zaleha (2020) Characterization of mechanical and physical properties of eggshell waste by using cold compaction. Advanced Research in Natural Fibers, 2 (1). pp. 1-4. ISSN 2682-7409

This list was generated on Fri Apr 19 02:01:35 2024 +08.